Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-279-2020
Chaimae Meftah, A. Retbi, S. Bennani, M. K. Idrissi
Abstract. The principle of gamification is very simple: it is a matter of using the game or its principles to facilitate learning. In our case, we are talking about mobile serious games (MSG), and more specifically the creation of scenarios to succeed this MSG. We present you the vision of our Easy course pack. This pack consists of several MSGs. Easy html is one of them. Nevertheless, we present some ideas about the scenarios, personalities and emotions that have impacted the development of MSG Easy html. Especially the importance of the 1st scenario which reflects the image of the game vis-a-vis the learner, the location of the trainer who passes the information via MSG and the developer who must ensure the ergonomics of the game and the correct and implicit passage of the educational information. this study gives as result an MSG which treats and explains all the tags of the HMTL language and certifies the learner at the end of the course.
{"title":"THE MOBILE SERIOUS GAME “EASY HTML”: SCENARIOS AND PERSPECTIVES","authors":"Chaimae Meftah, A. Retbi, S. Bennani, M. K. Idrissi","doi":"10.5194/isprs-archives-xliv-4-w3-2020-279-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-279-2020","url":null,"abstract":"Abstract. The principle of gamification is very simple: it is a matter of using the game or its principles to facilitate learning. In our case, we are talking about mobile serious games (MSG), and more specifically the creation of scenarios to succeed this MSG. We present you the vision of our Easy course pack. This pack consists of several MSGs. Easy html is one of them. Nevertheless, we present some ideas about the scenarios, personalities and emotions that have impacted the development of MSG Easy html. Especially the importance of the 1st scenario which reflects the image of the game vis-a-vis the learner, the location of the trainer who passes the information via MSG and the developer who must ensure the ergonomics of the game and the correct and implicit passage of the educational information. this study gives as result an MSG which treats and explains all the tags of the HMTL language and certifies the learner at the end of the course.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"1 1","pages":"279-284"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88490494","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-85-2020
I. E. Ayazli
Abstract. Developments in information technologies (IT) allow to modelling dynamic and complex form of cities and several studies have been implemented since 1990s. The cellular automata based urban growth simulation model, SLEUTH is the most well-known one among the simulation models. Calibration is the most important stage of the model created in three stages such as test, calibration, prediction. The more precise the calibration is completed, the more accurate the model generates. Several methods have been developed for the calibration step in which growth coefficients values are calculated by metrics. The study aims to investigate success of the Total Exploratory Factor Analysis (T-EFA) technique, which provides using the 13 metrics all together, in rapid grown settlement areas using high resolution data. In this context, the Sancaktepe district of Istanbul was selected as the study area and a simulation model was generated for the year 2050. The obtained results are promising to apply the T-EFA method in different studies.
{"title":"USING THE TOTAL EXPLORATORY FACTOR ANALYSIS (T-EFA) AS A CALIBRATION TECHNIQUE FOR SLEUTH MODEL","authors":"I. E. Ayazli","doi":"10.5194/isprs-archives-xliv-4-w3-2020-85-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-85-2020","url":null,"abstract":"Abstract. Developments in information technologies (IT) allow to modelling dynamic and complex form of cities and several studies have been implemented since 1990s. The cellular automata based urban growth simulation model, SLEUTH is the most well-known one among the simulation models. Calibration is the most important stage of the model created in three stages such as test, calibration, prediction. The more precise the calibration is completed, the more accurate the model generates. Several methods have been developed for the calibration step in which growth coefficients values are calculated by metrics. The study aims to investigate success of the Total Exploratory Factor Analysis (T-EFA) technique, which provides using the 13 metrics all together, in rapid grown settlement areas using high resolution data. In this context, the Sancaktepe district of Istanbul was selected as the study area and a simulation model was generated for the year 2050. The obtained results are promising to apply the T-EFA method in different studies.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"20 1","pages":"85-88"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81239133","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-99-2020
M. Balzani, L. Rossato, F. Raco, B. Kühl
Abstract. The present paper illustrates the survey and documentation activities for the 3D city modelling and visualisation carried out since 2016 on complex monumental buildings of the city of Sao Paulo in Brazil by the DIAPReM research centre and the TekneHub Laboratory of the University of Ferrara in collaboration with FAU-USP Faculdade de Arquitetura e Urbanismo of Universidade de Sao San Paolo and funded by the Fundacao de Apoio a Universidade de Sao Paulo- FUSP for the definition of interdisciplinary collaboration protocols and the development of integrated digital databases of Brazilian cultural heritage. Starting from a wider joint international research collaboration dated more than five years ago, the project aims to define interdisciplinary protocols for the digital documentation of built heritage in order to support the knowledge, restoration, maintenance, management and enhancement of Museu do Ipiranga - USP involving both academic and research competencies, as well as professional and technical skills. The definition of the first integrated digital database of the Museu do Ipiranga took into account the documentation needs of complex architecture for restoration and the project for new accessibility and the extension of the Museum itself and a wider digitisation project for urban planning as well as new Smart Cultural Heritage accessibility.
摘要本文阐述了自2016年以来，由DIAPReM研究中心和费拉拉大学TekneHub实验室与FAU-USP圣保罗大学建筑与城市规划学院合作，对巴西圣保罗市复杂的纪念性建筑进行的3D城市建模和可视化的调查和记录活动，并由Fundacao de Apoio a University of Sao Paulo- FUSP资助跨学科合作协议和巴西文化遗产综合数字数据库的开发。该项目始于五年前更广泛的国际联合研究合作，旨在为建筑遗产的数字文件定义跨学科协议，以支持知识、修复、维护、管理和增强博物馆的知识，包括学术和研究能力，以及专业和技术技能。Ipiranga博物馆第一个综合数字数据库的定义考虑了复杂建筑修复的文件需求，以及博物馆本身的新可达性和扩展项目，以及城市规划的更广泛的数字化项目，以及新的智能文化遗产可达性。
{"title":"3D CITY MODELLING TOWARD CONSERVATION AND MANAGEMENT. THE DIGITAL DOCUMENTATION OF MUSEU DO IPIRANGA - USP, SAN PAULO, BRAZIL","authors":"M. Balzani, L. Rossato, F. Raco, B. Kühl","doi":"10.5194/isprs-archives-xliv-4-w3-2020-99-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-99-2020","url":null,"abstract":"Abstract. The present paper illustrates the survey and documentation activities for the 3D city modelling and visualisation carried out since 2016 on complex monumental buildings of the city of Sao Paulo in Brazil by the DIAPReM research centre and the TekneHub Laboratory of the University of Ferrara in collaboration with FAU-USP Faculdade de Arquitetura e Urbanismo of Universidade de Sao San Paolo and funded by the Fundacao de Apoio a Universidade de Sao Paulo- FUSP for the definition of interdisciplinary collaboration protocols and the development of integrated digital databases of Brazilian cultural heritage. Starting from a wider joint international research collaboration dated more than five years ago, the project aims to define interdisciplinary protocols for the digital documentation of built heritage in order to support the knowledge, restoration, maintenance, management and enhancement of Museu do Ipiranga - USP involving both academic and research competencies, as well as professional and technical skills. The definition of the first integrated digital database of the Museu do Ipiranga took into account the documentation needs of complex architecture for restoration and the project for new accessibility and the extension of the Museum itself and a wider digitisation project for urban planning as well as new Smart Cultural Heritage accessibility.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"36 1","pages":"99-106"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82975697","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-435-2020
Zaame Imane, T. Mazri, Elrhayour Amine
Abstract. Due to the exclusory, growth in the number of connected devices- predicted 50 billion connected devices in 2020 (Gary Davis, 2020) that demand internet access, an upgraded network is required. The fifth generation is the newest mobile network replacing the 4G technology. Deployed from 2020 in many countries, 5G will provide revolutionary innovations in mobile technologies that will reach various high-level goals to the costumers as well as Companies .To benefit from 5G network services, the whole word is growing up rapidly towards the 5G by developing a clear perspective to include the main challenges, opportunities and key technology components. In this paper, an attempt has been made to provide an overview about the evolution of mobile generations from 1G to 5G by comparing the challenges and features that have evolved from each generation, describe the various scenario of 5G deployment, and discuss the best choice Implementation of 5G NR.
{"title":"5G: ARCHITECTURE OVERVIEW AND DEPLOYMENTS SCENARIOS","authors":"Zaame Imane, T. Mazri, Elrhayour Amine","doi":"10.5194/isprs-archives-xliv-4-w3-2020-435-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-435-2020","url":null,"abstract":"Abstract. Due to the exclusory, growth in the number of connected devices- predicted 50 billion connected devices in 2020 (Gary Davis, 2020) that demand internet access, an upgraded network is required. The fifth generation is the newest mobile network replacing the 4G technology. Deployed from 2020 in many countries, 5G will provide revolutionary innovations in mobile technologies that will reach various high-level goals to the costumers as well as Companies .To benefit from 5G network services, the whole word is growing up rapidly towards the 5G by developing a clear perspective to include the main challenges, opportunities and key technology components. In this paper, an attempt has been made to provide an overview about the evolution of mobile generations from 1G to 5G by comparing the challenges and features that have evolved from each generation, describe the various scenario of 5G deployment, and discuss the best choice Implementation of 5G NR.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"100 1","pages":"435-440"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83507030","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-7-2020
K. Ahkouk, M. Machkour, K. Majhadi, R. Mama
Abstract. Sequence to sequence models have been widely used in the recent years in the different tasks of Natural Language processing. In particular, the concept has been deeply adopted to treat the problem of translating human language questions to SQL. In this context, many studies suggest the use of sequence to sequence approaches for predicting the target SQL queries using the different available datasets. In this paper, we put the light on another way to resolve natural language processing tasks, especially the Natural Language to SQL one using the method of sketch-based decoding which is based on a sketch with holes that the model incrementally tries to fill. We present the pros and cons of each approach and how a sketch-based model can outperform the already existing solutions in order to predict the wanted SQL queries and to generate to unseen input pairs in different contexts and cross-domain datasets, and finally we discuss the test results of the already proposed models using the exact matching scores and the errors propagation and the time required for the training as metrics.
{"title":"SEQ2SEQ VS SKETCH FILLING STRUCTURE FOR NATURAL LANGUAGE TO SQL TRANSLATION","authors":"K. Ahkouk, M. Machkour, K. Majhadi, R. Mama","doi":"10.5194/isprs-archives-xliv-4-w3-2020-7-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-7-2020","url":null,"abstract":"Abstract. Sequence to sequence models have been widely used in the recent years in the different tasks of Natural Language processing. In particular, the concept has been deeply adopted to treat the problem of translating human language questions to SQL. In this context, many studies suggest the use of sequence to sequence approaches for predicting the target SQL queries using the different available datasets. In this paper, we put the light on another way to resolve natural language processing tasks, especially the Natural Language to SQL one using the method of sketch-based decoding which is based on a sketch with holes that the model incrementally tries to fill. We present the pros and cons of each approach and how a sketch-based model can outperform the already existing solutions in order to predict the wanted SQL queries and to generate to unseen input pairs in different contexts and cross-domain datasets, and finally we discuss the test results of the already proposed models using the exact matching scores and the errors propagation and the time required for the training as metrics.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"126 1","pages":"7-11"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76609780","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-189-2020
H. Ech-Chafay, M. Najy, Fatima Zahra Talbi, A. E. Ghazouany, M. Lachhab, D. Belghyti
Abstract. The availability of land and the climatic conditions encouraged by the geographical situation of Morocco, have pushed this country to adopt since the 90s natural leaning as being the technical solution most suited to the economic and climatic context, thus, many treatment stations wastewater has already been carried out. In order to assess the performance of the natural lagoon-type treatment plant in the town of Outat El Haj, we studied the physicochemical parameters of the raw and purified water from the plant. For this, we carried out a set of measurements such as: Temperature, pH and Electrical Conductivity (EC) (parameters on site), Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), Suspended Solids (TSS), Dissolved Oxygen, Hydrotimetric Titer (TH), Cl- Chloride, Organic Matter (OM), Orthophosphates, and Nitrates, in order to examine the reliability of this purification process in the study area. The purification yields observed in the treatment plant vary from 23 to 94.6% as an abatement for BOD5. This average yield varies between 22.3 and 89.8% for COD, between 22.6 and 90.6% for OM, and between 9.2 and 65.5% for suspended matter (suspended matter). The purification performance is negative to very low in nitrogen and Orthophosphates. The results of the analyzes showed that the purification yields of the natural lagoon-type station, low, variable and remain dependent on the season.
摘要由于摩洛哥的地理位置，土地的可用性和气候条件促使这个国家自90年代以来采用自然学习作为最适合经济和气候背景的技术解决方案，因此，许多污水处理站已经开始运行。为了评估Outat El Haj镇天然泻湖型处理厂的性能，我们研究了该工厂原水和纯净水的物理化学参数。为此，我们进行了一系列测量，如:温度、pH值和电导率(EC)(现场参数)、生化需氧量(BOD5)、化学需氧量(COD)、悬浮物(TSS)、溶解氧、水文滴度(TH)、氯离子、有机物(OM)、正磷酸盐和硝酸盐，以检验该净化过程在研究区域的可靠性。在处理厂中观察到的净化率从23%到94.6%不等，以减少BOD5。COD的平均产率在22.3 ~ 89.8%之间，OM的平均产率在22.6 ~ 90.6%之间，悬浮物(悬浮物)的平均产率在9.2 ~ 65.5%之间。氮和正磷酸盐的净化性能为负至极低。分析结果表明，天然泻湖型站的净化产量低，且随季节变化而变化。
{"title":"STUDY OF THE PURIFICATION PERFORMANCE OF THE NATURAL LAGUNATING TECHNIQUE OF THE PURIFICATION STATION OF THE CITY OF OUTAT EL HAJ – MOROCCO","authors":"H. Ech-Chafay, M. Najy, Fatima Zahra Talbi, A. E. Ghazouany, M. Lachhab, D. Belghyti","doi":"10.5194/isprs-archives-xliv-4-w3-2020-189-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-189-2020","url":null,"abstract":"Abstract. The availability of land and the climatic conditions encouraged by the geographical situation of Morocco, have pushed this country to adopt since the 90s natural leaning as being the technical solution most suited to the economic and climatic context, thus, many treatment stations wastewater has already been carried out. In order to assess the performance of the natural lagoon-type treatment plant in the town of Outat El Haj, we studied the physicochemical parameters of the raw and purified water from the plant. For this, we carried out a set of measurements such as: Temperature, pH and Electrical Conductivity (EC) (parameters on site), Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), Suspended Solids (TSS), Dissolved Oxygen, Hydrotimetric Titer (TH), Cl- Chloride, Organic Matter (OM), Orthophosphates, and Nitrates, in order to examine the reliability of this purification process in the study area. The purification yields observed in the treatment plant vary from 23 to 94.6% as an abatement for BOD5. This average yield varies between 22.3 and 89.8% for COD, between 22.6 and 90.6% for OM, and between 9.2 and 65.5% for suspended matter (suspended matter). The purification performance is negative to very low in nitrogen and Orthophosphates. The results of the analyzes showed that the purification yields of the natural lagoon-type station, low, variable and remain dependent on the season.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"83 1","pages":"189-193"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74338295","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-203-2020
I. Elachkar, H. Ouzif, H. Labriji
Abstract. The user profile is a very important tool in several fields such as recommendation systems, customization systems etc., it is used to narrow the number of data or results provided for a specific user, also to minimize the cost and the time of processing of multiple systems. Whatever the user profile model used, it’s updating and enrichment is a very essential step in the information research process in order to obtain more interesting and satisfactory results, which lead the information systems to develop several techniques aiming to enrich them based especially on similarity methods between user profiles. The similarity methods are used for several tasks such as the detection of duplicate profiles in online social network, also to answer the problem of cold start, and to predict users who can become friends as well as their future intentions, etc. In this paper, we propose a new approach to express the similarity between users profiles by developing a structural similarity measure to calculate the similarity between user profiles based on SimRank measure or similarity ,and the properties of bipartite graphs, in order to take advantage of the information provided by the relational structure between user profiles and their interests, our method is characterized by the similarity propagation between graph's nodes over iterations from source nodes to their successors, so our method finds profiles similar to the query profile, whether the links are direct or indirect between profiles.
{"title":"STRUCTURAL SIMILARITY MEASURE OF USERS PROFILES BASED ON A WEIGHTED BIPARTITE GRAPHS","authors":"I. Elachkar, H. Ouzif, H. Labriji","doi":"10.5194/isprs-archives-xliv-4-w3-2020-203-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-203-2020","url":null,"abstract":"Abstract. The user profile is a very important tool in several fields such as recommendation systems, customization systems etc., it is used to narrow the number of data or results provided for a specific user, also to minimize the cost and the time of processing of multiple systems. Whatever the user profile model used, it’s updating and enrichment is a very essential step in the information research process in order to obtain more interesting and satisfactory results, which lead the information systems to develop several techniques aiming to enrich them based especially on similarity methods between user profiles. The similarity methods are used for several tasks such as the detection of duplicate profiles in online social network, also to answer the problem of cold start, and to predict users who can become friends as well as their future intentions, etc. In this paper, we propose a new approach to express the similarity between users profiles by developing a structural similarity measure to calculate the similarity between user profiles based on SimRank measure or similarity ,and the properties of bipartite graphs, in order to take advantage of the information provided by the relational structure between user profiles and their interests, our method is characterized by the similarity propagation between graph's nodes over iterations from source nodes to their successors, so our method finds profiles similar to the query profile, whether the links are direct or indirect between profiles.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"44 1","pages":"203-207"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87164440","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-209-2020
N. El-Bakkouri, T. Mazri
Abstract. The Internet of Things had become more usually those recent years, it helps the human to be connected to every devices, to The Internet of Things had become more usually those recent years, it helps the human to be connected to every devices, to communicate and to share information for each other, the IoT gives many benefits to HealthCare systems and applications, it help to diagnostic and to monitor patients more closely and easier, but as other domain based on technologies, the smart Health use IT programs and Wireless network to exchange and analyse data which may be stooling by attackers if it doesn't secured and controlled permanently, as a fact of this weakness, it's possible to injure or kill some patient without being detected, this article discussing the Smart Health system, its benefits and examples of its using, also, it gives a view about security issues that can touch to this domain and best practice to follow for securing, detecting and avoiding security risks.
{"title":"SECURITY THREATS IN SMART HEALTHCARE","authors":"N. El-Bakkouri, T. Mazri","doi":"10.5194/isprs-archives-xliv-4-w3-2020-209-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-209-2020","url":null,"abstract":"Abstract. The Internet of Things had become more usually those recent years, it helps the human to be connected to every devices, to The Internet of Things had become more usually those recent years, it helps the human to be connected to every devices, to communicate and to share information for each other, the IoT gives many benefits to HealthCare systems and applications, it help to diagnostic and to monitor patients more closely and easier, but as other domain based on technologies, the smart Health use IT programs and Wireless network to exchange and analyse data which may be stooling by attackers if it doesn't secured and controlled permanently, as a fact of this weakness, it's possible to injure or kill some patient without being detected, this article discussing the Smart Health system, its benefits and examples of its using, also, it gives a view about security issues that can touch to this domain and best practice to follow for securing, detecting and avoiding security risks.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"30 1","pages":"209-214"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82847975","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-33-2020
M. Ameksa, H. Mousannif, H. Al Moatassime, Z. E. A. Elassad
Abstract. Recently, driving behavior has been the focus of several researchers and scientists, they are attempting to identify and analyze driving behavior using different sources of data. The purpose of this research is to investigate data acquisition methods and tools related to driving behavior, in addition to the type of data acquired. Using a systematic literature review strategy, this study identified tools and techniques used to collect data related to driving behavior among 120 selected studies from 2010 to 2020 in several literature resources. It then measured the percentages of the most commonly used methods, as well as the type of data collected. In-vehicle and IoT sensors was found to play the greatest role in data collection in approximately 67% of the documents selected studies; And concerning the type of data acquired, those relating to the vehicle are the most widely collected. Thus, this study definitively answers the question regarding the different data sources and data types used among researches. However, further studies are needed to give more attention to the driver's data and also to investigate the data from the three dimensions of driving (driver, vehicle, and environment) together as an integrated and interconnected system.
{"title":"TOWARD FLEXIBLE DATA COLLECTION OF DRIVING BEHAVIOUR","authors":"M. Ameksa, H. Mousannif, H. Al Moatassime, Z. E. A. Elassad","doi":"10.5194/isprs-archives-xliv-4-w3-2020-33-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-33-2020","url":null,"abstract":"Abstract. Recently, driving behavior has been the focus of several researchers and scientists, they are attempting to identify and analyze driving behavior using different sources of data. The purpose of this research is to investigate data acquisition methods and tools related to driving behavior, in addition to the type of data acquired. Using a systematic literature review strategy, this study identified tools and techniques used to collect data related to driving behavior among 120 selected studies from 2010 to 2020 in several literature resources. It then measured the percentages of the most commonly used methods, as well as the type of data collected. In-vehicle and IoT sensors was found to play the greatest role in data collection in approximately 67% of the documents selected studies; And concerning the type of data acquired, those relating to the vehicle are the most widely collected. Thus, this study definitively answers the question regarding the different data sources and data types used among researches. However, further studies are needed to give more attention to the driver's data and also to investigate the data from the three dimensions of driving (driver, vehicle, and environment) together as an integrated and interconnected system.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"1 1","pages":"33-43"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75387135","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-11-23DOI: 10.5194/isprs-archives-xliv-4-w3-2020-339-2020
N. Polat
Abstract. With the developing computer technologies and increasing data variety, academic and commercial studies started to move from 2 dimensions to 3 dimensions and within the concept of 3D Spatial Information Technology; Many new products and methods have emerged, such as the Digital Earth, Smart City, Virtual Reality, Intelligent Transportation Systems. 3D models of cities are now produced as well as 2D maps. These models can be used in many areas from urban planning, navigation applications, modelling of ancient cities to training and simulation applications. In this context, there are a few data set such as aerial images and LiDAR data, that can be used as 3D data source for modelling purposes. Within the scope of the study, an automatic 3D city model was produced with Envi LiDAR software.
{"title":"LIDAR DERIVED 3D CITY MODELLING","authors":"N. Polat","doi":"10.5194/isprs-archives-xliv-4-w3-2020-339-2020","DOIUrl":"https://doi.org/10.5194/isprs-archives-xliv-4-w3-2020-339-2020","url":null,"abstract":"Abstract. With the developing computer technologies and increasing data variety, academic and commercial studies started to move from 2 dimensions to 3 dimensions and within the concept of 3D Spatial Information Technology; Many new products and methods have emerged, such as the Digital Earth, Smart City, Virtual Reality, Intelligent Transportation Systems. 3D models of cities are now produced as well as 2D maps. These models can be used in many areas from urban planning, navigation applications, modelling of ancient cities to training and simulation applications. In this context, there are a few data set such as aerial images and LiDAR data, that can be used as 3D data source for modelling purposes. Within the scope of the study, an automatic 3D city model was produced with Envi LiDAR software.","PeriodicalId":14757,"journal":{"name":"ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences","volume":"6 1","pages":"339-342"},"PeriodicalIF":0.0,"publicationDate":"2020-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76443748","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：