Journal of Orthopaedic Surgery最新文献

Purpose: To perform a quantitative analysis of the amount of cancellous bone in the distal radius and olecranon process by segmentation of computed tomographic scans. As a secondary analysis, the bone density by Hounsfield units was evaluated at the same sites.

Methods: Computed tomography angiography images of the upper extremity were analyzed using 3-D Slicer™ medical imaging software. Bone volume (cm³) and density (Hounsfield units) from the cancellous bone between the distal radius and the olecranon process were compared by creating an advanced three-dimensional model. The images were analyzed in duplicate, and an intraclass correlation was performed to assess measurement consistency.

Results: Twenty subjects were included. A total volume of 5.01 ± 1.21 cm³ and 5.81 ± 1.61 cm³ for the distal radius and the olecranon process (p < .0001), respectively, was found. Regarding Hounsfield units, the density of the olecranon process was 303.1 ± 73.26, and the distal radius was 206.5 ± 63.73 (p < .0001). All intraclass correlation coefficients were >0.992.

Conclusion: These results suggest that the olecranon process has a greater volume and a higher bone mineral density than the distal radius. With these results, the surgeon will have the ability to decide the quantity and quality of bone grafts according to the surgical procedure.

Purpose: Fracture-related infections (FRIs) encompass a broad range of infections associated with bone fractures; they remain a significant clinical challenge. Here, we aimed to investigate the viability of focusing on soft-tissue management in patients suspected of chronic FRI, who exhibit no significant bony uptake on bone single photon emission computed tomography (SPECT)/computed tomography (CT) scans.

Methods: Between January 2016 and January 2022, we managed 25 patients with chronic FRI or post-traumatic osteomyelitis using technetium 99m-methyl diphosphonate bone SPECT/CT to assess infection depth. Among them, 13 patients showing negligible bony uptake were included and categorized into two groups based on wound discharge reaching the bone/implant (Criteria 1, n = 6) or not (Criteria 2, n = 7).

Results: Patients in the Criteria 1 group were treated with antibiotics and soft tissue debridement without bony procedure. The average duration of antibiotic therapy was 6.7 weeks. Treatments were individualized, including implant changes, local flaps, skin grafts, and negative pressure wound therapy. No recurrence was reported in the mean follow-up of 21.3 months. Patients in the Criteria 2 group were treated with oral antibiotics (mean duration: 5.9 weeks) and daily wound dressings. No recurrence was reported in the mean follow-up of 26.0 months, and no surgical interventions were required.

Conclusion: This study demonstrates the feasibility of focusing on soft-tissue management in patients with chronic FRI showing minimal bony uptake on bone SPECT/CT. Our treatment protocol avoided unnecessary surgical bone procedures, resulting in successful clinical outcomes with no recurrences.

Background: The purpose of this study was to investigate the effect of 3D-printed technology to repair glenoid bone defect on shoulder joint stability. Methods: The shoulder joints of 25 male cadavers were tested. The 3D-printed glenoid pad was designed and fabricated. The specimens were divided into 5 groups. Group A: no bone defect and the structure of the glenoid labrum and joint capsule was intact; Group B: Anterior inferior bone defect of the shoulder glenoid; Group C: a pad with a width of 2 mm was installed; Group D: a pad with a width of 4 mm was installed; Group E: a pad with a width of 6 mm was installed. This study measured the distance the humeral head moved forward at the time of glenohumeral dislocation and the maximum load required to dislocate the shoulder. Results: The shoulder joint stability and humerus displacement was significantly lower in groups B and C compared with group A (p < .05). Compared with group A, the stability of the shoulder joint of group D was significantly improved (p < .05). However, there was no significant difference in humerus displacement between groups D and A (p > .05). In addition, compared with group A, shoulder joint stability was significantly increased and humerus displacement was significantly decreased in group E (p < .05). Conclusion: The 3D-printed technology can be used to make the shoulder glenoid pad to perfectly restore the geometric shape of the shoulder glenoid articular surface. Moreover, the 3D-printed pad is 2 mm larger than the normal glenoid width to restore the initial stability of the shoulder joint.

Objective: Local infiltration analgesia (LIA), adductor canal block (ACB), and infiltration between the popliteal artery and the capsule of the posterior knee (IPACK) are popular multimodal analgesia techniques used during total knee arthroplasty (TKA). This study aimed to explore the efficacy of adding the IPACK technique to ACB and LIA in patients undergoing TKA.

Methods: In this retrospective cohort study, patients who underwent primary unilateral TKA were divided into two groups based on their date of admission. Sixty-three patients underwent IPACK, ACB and LIA (IPACK group) during surgery, while 60 patients underwent ACB and LIA (control group). The primary outcome was the postoperative administration of morphine hydrochloride as a rescue analgesic. Secondary outcomes included time to first rescue analgesia, postoperative pain assessed using the visual analog scale (VAS), functional recovery assessed by knee range of motion and ambulation distance, time until hospital discharge, and complication rates.

Results: The two groups were similar in average postoperative 0-to-24-h morphine consumption (11.8 mg for the control group vs 12.7 mg for the IPACK group, p = .428) and average total morphine consumption (18.2 mg vs 18.0 mg, p = .983) during hospitalization. There were also no significant differences in the secondary outcomes.

Conclusions: The addition of IPACK to ACB and LIA did not provide any clinical analgesic benefits. Orthopedic surgeons and anesthesiologists are justified in using ACB and LIA without IPACK for TKA.

Purpose: A fundamental understanding of plantar pressure distribution is important for prescribing an appropriate orthosis and applying nonoperative methods, such as stretching exercises, for the treatment of plantar fasciitis. Despite existing research on plantar pressure distribution, discrepancies between affected and unaffected sides in unilateral plantar fasciitis patients warrant further investigation. This study aimed to evaluate the plantar pressure distribution in patients with unilateral plantar fasciitis by comparing it with that on the contralateral unaffected side.

Methods: We retrospectively reviewed records from 20 consecutive patients diagnosed with unilateral plantar fasciitis, using the unaffected side as the control. The emed^® pedobarographic system was used to measure the plantar pressure distribution during gait. The analysis was performed using a 4-mask configuration (toes, forefoot, midfoot, and hindfoot).

Results: Both sides showed no significant differences in radiographic parameters. The affected side showed a significantly higher contact area, maximum force, and force-time integrals in the midfoot. However, the unaffected side demonstrated significantly higher maximum force and force-time integrals in the hindfoot. There was no difference in the distribution of the peak pressure and pressure-time integrals between the two sides in all mask regions. The increased contact area and maximum force in the midfoot on the side with plantar fasciitis may result from heel pain-induced weight transfer from the hindfoot.

Conclusion: The findings of this study provide a basic understanding of plantar pressure distribution in the treatment of plantar fasciitis and highlight the importance of considering inter-side differences when designing treatment interventions or orthotic devices.

Purpose: This investigation aims to explore the protective role of Naringenin (Nar) in bone cancer pain (BCP) via TNF-α-mediated NF-κB/uPA/PAR2 pathway.

Methods: BCP model was manipulated by the injection of LL2 cells into femur of mice. The levels of TNF-α and uPA in bone tissue and serum were studied by ELISA. The expressions of PAR2, PKC-γ, PKA and TRPV1 were determined by qPCR and western blot. Levels of p-IKKβ, IKKβ, p-p65, p65 were determined by western blot. Levels of p-p65 and uPA in bone tissue were studied by immunohistochemistry. Behavior tests in this investigation included paw withdrawal latency (PWL) and the paw withdrawal threshold (PWT). Radiological analysis and micro-CT were used to study bone structure. The lesions of bone tissue were determined by HE staining. The Dorsal root ganglia (DRG) isolated from mice were used to determine the level of PAR2 pathway.

Results: Naringenin improved the BCP-induced bone damage based on the increases of BV/TV, Conn. D, BMD and BMC and the decrease of bone destruction score. Naringenin repressed the reductions of PWT and PWL in BCP mice. Naringenin decreased the levels of PAR2, PKC-γ, PKA and TRPV1 of DRG and reduced the levels of p-IKKβ, p-p65, and uPA in serum and bone tissue in BCP. Importantly, naringenin suppressed the enhancement of TNF-α in serum and bone tissue in BCP mice.

Conclusion: Naringenin alleviated pain sensitization and bone damage of mice with BCP via TNF-α-mediated NF-κB/uPA/PAR2 pathway. We demonstrated a novel pathway for anti-BCP treatment with naringenin.

Background: Symmetrical peripheral gangrene (SPG) is a destructive clinical condition where amputation is often the final treatment option. We aimed to identify the predictors of SPG using the common data model (CDM) and propose a new scoring system for predicting hospitalized patients at risk of developing SPG. Methods: A cohort of patients treated with intravenous noradrenaline, epinephrine, and vasopressin between 2011 and 2020 was retrospectively analyzed using the CDM database. The main outcome was amputation performed as a resuscitation measure. We investigated risk factors including demographic characteristics, comorbidities, and preoperative laboratory values. Based on demographic variables such as age and sex, a 1:10 propensity score matching (PSM) was performed. The odds ratio (OR) was calculated using logistic regression analysis. Results: Amputation was performed in 308 (0.4%) patients out of a cohort of 73,902 patients. Age, sex, hypertension, diabetes mellitus (DM), renal disease (RD), heart failure, anemia, hypercholesterolemia, peripheral vascular disease (PVD), and laboratory markers such as albumin, eosinophils, hematocrit, lymphocytes, monocytes, neutrophils, ESR, aPTT, creatinine, and BUN were statistically significant. Logistic regression analysis revealed statistically significant differences in DM (OR 5.51), RD (OR 2.90), PVD (OR 9.67), and cerebrovascular disease (CVD) (OR 0.49). Compared to the group without amputation, logistic regression analysis after matching the age and sex group with 1:10 PSM showed statistically significant results in DM (OR 3.59), RD (OR 2.59), PVD (OR 7.76), and CVD (OR 0.40). Conclusion: Early recognition of high-risk patients may help medical providers prevent severe outcomes, including amputation surgery.

Aim: To explore the effects of tibial osteotomy varus angle combined with posterior tibial slope (PTS) on the stress of polyethylene liner in total knee arthroplasty (TKA) by building finite element model (FEM).

Methods: Established the FEM of standard TKA with tibial osteotomy varus angle 0° to 9° were established and divided into 10 groups. Next, each group was created 10 FEMs with 0° to 9° PTS separately. Calculated the stress on polyethylene liner in each group in Abaqus. Finally, the relevancy between tibial osteotomy angle and polyethylene liner stress was statistically analyzed using multiple regression analysis.

Results: As the varus angle increased, the area of maximum stress gradually shifted medially on the polyethylene liner. As the PTS increases, the percentage of surface contact forces on the medial and lateral compartmental of the polyethylene liner gradually converge to the same. When the varus angle is between 0° and 3°, the maximum stress of the medial compartmental surfaces of polyethylene liner rises smoothly with the increase of the PTS. When the varus angle is between 4° and 9°, as the increase of the PTS, the maximum stress of polyethylene liner rises first and then falls, forming a trough at PTS 5° and then rises again. Compared to the PTS, the varus angle has a large effect on the maximum stress of the polyethylene liner (p < .001).

Conclusion: When the varus angle is 0° to 3°, PTS 0° is recommended, which will result in a more equalized stress distribution of the polyethylene liner in TKA.

Purpose: The purpose of the present work was to assess the specific effects and underlying mechanisms of Daprodustat (GSK1278863) on skeletal muscle injury induced by ischemia reperfusion (I/R).

Methods: C57BL/6 mice were randomized into the skeletal muscle I/R injury (I/R), Daprodustat (GSK1278863) pretreatment and I/R (I/R + GSK) and sham operation (Sham) groups. The skeletal muscle I/R injury model was established by placing an orthodontic rubber band at the left hip joint for 3 h and releasing it for 3 h. H&E staining, wet weight/dry weight ratio assessment, TUNEL assay, ELISA, qRT-PCR and immunoblot were utilized to assess the effects of Daprodustat.

Results: Daprodustat pretreatment significantly ameliorated apoptosis in skeletal muscle cells, reduced oxidative damage and suppressed inflammatory cytokines. Mechanistically, Daprodustat positively affected NF-κB signaling activation.

Conclusion: These data demonstrated that Daprodustat may provide a potential clinical approach for preventing or treating skeletal muscle injury induced by I/R.