During the last years, some concerns have arisen in relation to the outcome of mechanisms of failure in composite materials according to its mechanical behavior. Such interest resulted in the development of new complex structures in order to enhance its mechanical resistance and the controlling of damage processes. Nevertheless, it is imperative to understand the degree of mechanical performance that these materials can achieve when under external stresses. In this regard, applying Acoustic Emission (AE) technique is widely known as a very effective technology for identifying and monitoring damage progression on different kind of materials and structures providing valuable information. AE is a non-destructive technique (NDT) capable of detecting micro damage initiation and propagation along several types of failure modes such as reinforcement/matrix interfacial debonding, matrix cracking, delamination, fracture, etc. This paper examines applications of AE regarding to composite materials where fracture processes are generally more complex and data interpretation is correspondingly more difficult. Finally, in order to continuously improve the reliability of this technique, several researches have advanced its trustworthiness through innovations in AE technology. Some perspectives are discussed.
{"title":"Analyzing the Sound of Materials: Application of Acoustic Emission Technique for Monitoring Material Behavior","authors":"C. R. Ríos-Soberanis, Takenobu Sakai, S. Wakayama","doi":"10.4028/p-hk3qly","DOIUrl":"https://doi.org/10.4028/p-hk3qly","url":null,"abstract":"During the last years, some concerns have arisen in relation to the outcome of mechanisms of failure in composite materials according to its mechanical behavior. Such interest resulted in the development of new complex structures in order to enhance its mechanical resistance and the controlling of damage processes. Nevertheless, it is imperative to understand the degree of mechanical performance that these materials can achieve when under external stresses. In this regard, applying Acoustic Emission (AE) technique is widely known as a very effective technology for identifying and monitoring damage progression on different kind of materials and structures providing valuable information. AE is a non-destructive technique (NDT) capable of detecting micro damage initiation and propagation along several types of failure modes such as reinforcement/matrix interfacial debonding, matrix cracking, delamination, fracture, etc. This paper examines applications of AE regarding to composite materials where fracture processes are generally more complex and data interpretation is correspondingly more difficult. Finally, in order to continuously improve the reliability of this technique, several researches have advanced its trustworthiness through innovations in AE technology. Some perspectives are discussed.","PeriodicalId":18262,"journal":{"name":"Materials Science Forum","volume":" 38","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140212790","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Cotton has traditionally been mercerised as hanks of yarn or as open-width fabrics, but commercial methods to mercerise loose stock directly after ginning have been limited. Arnold and Rippon [1,2] produced continuous lengths of fully mercerised sliver with increased fibre strength, enhanced dye-uptake, improved surface lustre, without fibre shrinkage. Not only did the method prevent shrinkage, but fibres could be stretched by as much as 4% and then stably set. The disadvantage of this method was that fibre had to be fully processed to sliver form.An improved prototype machine has now been successfully developed to continuously mercerise ginned loose stock. Testing has confirmed that the output fibres are mercerised along their full lengths and have higher tenacity compared with the un-mercerised Control. Fibre lengths have also been maintained, indicating that the shrinkage normally caused by slack mercerising has been prevented. Fibre dyeability is comparable with that of slack-mercerised samples but better than the un-mercerised Control. The improved lustre expected for fibre mercerised under tension has also been confirmed. The production rate of the process can be readily improved, and the prototype expanded in size to increase output.
{"title":"Development of a Process to Continuously Mercerise Loose-Stock Cotton","authors":"Lyndon Arnold, R. Padhye","doi":"10.4028/p-ph2mr9","DOIUrl":"https://doi.org/10.4028/p-ph2mr9","url":null,"abstract":"Cotton has traditionally been mercerised as hanks of yarn or as open-width fabrics, but commercial methods to mercerise loose stock directly after ginning have been limited. Arnold and Rippon [1,2] produced continuous lengths of fully mercerised sliver with increased fibre strength, enhanced dye-uptake, improved surface lustre, without fibre shrinkage. Not only did the method prevent shrinkage, but fibres could be stretched by as much as 4% and then stably set. The disadvantage of this method was that fibre had to be fully processed to sliver form.An improved prototype machine has now been successfully developed to continuously mercerise ginned loose stock. Testing has confirmed that the output fibres are mercerised along their full lengths and have higher tenacity compared with the un-mercerised Control. Fibre lengths have also been maintained, indicating that the shrinkage normally caused by slack mercerising has been prevented. Fibre dyeability is comparable with that of slack-mercerised samples but better than the un-mercerised Control. The improved lustre expected for fibre mercerised under tension has also been confirmed. The production rate of the process can be readily improved, and the prototype expanded in size to increase output.","PeriodicalId":18262,"journal":{"name":"Materials Science Forum","volume":"59 19","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140230547","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mohammad Mamunur Rashid, M. Zorc, B. Simončič, Ivan Jerman, B. Tomšič
In this work, TiO2 was applied to cotton fabric by a sol–gel-hydrothermal process. A combination of 3-(trihydroxysilyl) propyl methylphosphonate monosodium salt solution (TPMP) and (3-aminopropyl)triethoxysilane (APTES) was used as a matrix to enhance the interfacial interaction between TiO2 and surface of the cotton fibres. During the hydrothermal treatment, silver nitrate (AgNO3) or reduced graphene oxide (rGO) were added to produce Ag-doped TiO2- or rGO-coupled TiO2-coated textiles. The successful application of all investigated components on cotton fabric was confirmed by the analysis of SEM and EDS. The results of UPF determination and self-cleaning activity showed excellent performance of both studied nanocomposite coatings, whereas the use of rGO proved to be better than Ag.
{"title":"Ag Doping and rGO Coupling of TiO2 within Polysiloxane Matrix for the Ecofriendly Development of High-Performance Cotton Fabric","authors":"Mohammad Mamunur Rashid, M. Zorc, B. Simončič, Ivan Jerman, B. Tomšič","doi":"10.4028/p-r24xao","DOIUrl":"https://doi.org/10.4028/p-r24xao","url":null,"abstract":"In this work, TiO2 was applied to cotton fabric by a sol–gel-hydrothermal process. A combination of 3-(trihydroxysilyl) propyl methylphosphonate monosodium salt solution (TPMP) and (3-aminopropyl)triethoxysilane (APTES) was used as a matrix to enhance the interfacial interaction between TiO2 and surface of the cotton fibres. During the hydrothermal treatment, silver nitrate (AgNO3) or reduced graphene oxide (rGO) were added to produce Ag-doped TiO2- or rGO-coupled TiO2-coated textiles. The successful application of all investigated components on cotton fabric was confirmed by the analysis of SEM and EDS. The results of UPF determination and self-cleaning activity showed excellent performance of both studied nanocomposite coatings, whereas the use of rGO proved to be better than Ag.","PeriodicalId":18262,"journal":{"name":"Materials Science Forum","volume":"10 5‐6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140228409","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Inherent structural stress in a plain weave is induced during the formation process of fabrics, and its evaluation is useful for estimating the mechanical stiffness of weaves. In this study, the effect of inherent stress distributed in a weave fabric was investigated to estimate its mechanical stiffness. Here, a numerical simulation method that imitates the fabrication process of fabrics is proposed to evaluate stiffness. A diagram illustrating the weaving process is defined in this evaluation method. For computational analysis, a unit cell model used in homogenization was developed based on the structural periodicity of the plain weave structure using the finite element method. The weaving state was accomplished by simulating the weaving behavior in this model. The weaving state included the geometric shape and stress/strain data. Subsequently, a model was built to estimate the mechanical stiffness based on the weaving state data. Finally, a uniaxial tensile simulation was conducted using the numerical model. Using this evaluation method, the effect of inherent stress on the mechanical stiffness of weaves was quantified, which indicated that the tensile stiffness improved in a small strain range. The effect gradually decreased as the tension progressed.
{"title":"Computational Evaluation of Weaving Process on Mechanical Stiffness of Plain Weave Fabric","authors":"Yue Zhang, Hikaru Miyaki, Jianliang Zhang, Atsushi Sakuma","doi":"10.4028/p-7qdn38","DOIUrl":"https://doi.org/10.4028/p-7qdn38","url":null,"abstract":"Inherent structural stress in a plain weave is induced during the formation process of fabrics, and its evaluation is useful for estimating the mechanical stiffness of weaves. In this study, the effect of inherent stress distributed in a weave fabric was investigated to estimate its mechanical stiffness. Here, a numerical simulation method that imitates the fabrication process of fabrics is proposed to evaluate stiffness. A diagram illustrating the weaving process is defined in this evaluation method. For computational analysis, a unit cell model used in homogenization was developed based on the structural periodicity of the plain weave structure using the finite element method. The weaving state was accomplished by simulating the weaving behavior in this model. The weaving state included the geometric shape and stress/strain data. Subsequently, a model was built to estimate the mechanical stiffness based on the weaving state data. Finally, a uniaxial tensile simulation was conducted using the numerical model. Using this evaluation method, the effect of inherent stress on the mechanical stiffness of weaves was quantified, which indicated that the tensile stiffness improved in a small strain range. The effect gradually decreased as the tension progressed.","PeriodicalId":18262,"journal":{"name":"Materials Science Forum","volume":"14 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140228618","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Sven Hellmann, Carmen Sachse, E. Häntzsche, C. Cherif
Weft-knitted fabrics are used in a wide range of applications. The tensile behaviour, the geometric diversity and the materials to be used are essential structural parameters that are also economically important. To improve this behaviour, the new approach is to integrate warp-stitch threads into a weft-knitted fabric using conventional weft-knitting machine technology, thus significantly increasing the range of binding possibilities for the adjustment of elasticity in wale direction. The characteristics that can be achieved in this way open up new areas of application, for example in compression textiles.
{"title":"Novel Knit Structure with Adjustable Tensile Behaviour Based on Combined Weft/Warp Technology","authors":"Sven Hellmann, Carmen Sachse, E. Häntzsche, C. Cherif","doi":"10.4028/p-pzvte0","DOIUrl":"https://doi.org/10.4028/p-pzvte0","url":null,"abstract":"Weft-knitted fabrics are used in a wide range of applications. The tensile behaviour, the geometric diversity and the materials to be used are essential structural parameters that are also economically important. To improve this behaviour, the new approach is to integrate warp-stitch threads into a weft-knitted fabric using conventional weft-knitting machine technology, thus significantly increasing the range of binding possibilities for the adjustment of elasticity in wale direction. The characteristics that can be achieved in this way open up new areas of application, for example in compression textiles.","PeriodicalId":18262,"journal":{"name":"Materials Science Forum","volume":"54 31","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140231200","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
V. Trovato, Giuseppina Iacono, G. Malucelli, G. Rosace
In this paper, the sol-gel technique was used to design hybrid phosphorus-doped silica structures for improving the thermal stability and flame retardancy of cotton fabrics. To this aim, diethylphosphatoethyltriethoxysilane (DPTS) was employed as phosphate alkoxysilane in a multistep procedure that involved multiple layers (from 1 to 6) depositions. The multi-layer coatings were applied by padding using sols containing appropriate molar ratios of the precursor, anhydrous ethanol, catalyst, and hydrochloric acid. Moreover, the synergism P-N on flame retardancy of cotton was assessed by introducing 3-aminopropyltriethoxysilane (APTES) as an N-donor precursor in DPTS sols. The effects of the catalyst during the alkoxide reaction and the silica amount applied by sol-gel treatment on the thermo-oxidative behavior of the treated fabrics were deeply studied. The creation of the silica skeleton on the cotton surface and the interactions between the cellulosic fibres and the doped layer were investigated using FT-IR ATR spectroscopy. Moreover, thermal and thermo-oxidative stability, flammability properties, and combustion behavior of the sol-gel treated cotton fabrics were also studied, proving the effectiveness of the sol-gel coating in the fire protection of the cellulosic substrate.
{"title":"Silica-Containing Phosphorus-Based Sol-Gel Finishing to Improve Flame Retardant Performance of Cotton Fabrics","authors":"V. Trovato, Giuseppina Iacono, G. Malucelli, G. Rosace","doi":"10.4028/p-usqr8l","DOIUrl":"https://doi.org/10.4028/p-usqr8l","url":null,"abstract":"In this paper, the sol-gel technique was used to design hybrid phosphorus-doped silica structures for improving the thermal stability and flame retardancy of cotton fabrics. To this aim, diethylphosphatoethyltriethoxysilane (DPTS) was employed as phosphate alkoxysilane in a multistep procedure that involved multiple layers (from 1 to 6) depositions. The multi-layer coatings were applied by padding using sols containing appropriate molar ratios of the precursor, anhydrous ethanol, catalyst, and hydrochloric acid. Moreover, the synergism P-N on flame retardancy of cotton was assessed by introducing 3-aminopropyltriethoxysilane (APTES) as an N-donor precursor in DPTS sols. The effects of the catalyst during the alkoxide reaction and the silica amount applied by sol-gel treatment on the thermo-oxidative behavior of the treated fabrics were deeply studied. The creation of the silica skeleton on the cotton surface and the interactions between the cellulosic fibres and the doped layer were investigated using FT-IR ATR spectroscopy. Moreover, thermal and thermo-oxidative stability, flammability properties, and combustion behavior of the sol-gel treated cotton fabrics were also studied, proving the effectiveness of the sol-gel coating in the fire protection of the cellulosic substrate.","PeriodicalId":18262,"journal":{"name":"Materials Science Forum","volume":"3 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140228738","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Tobias Georg Lang, Mmb Hasan, A. Abdkader, C. Cherif, T. Gereke
The growing use of carbon fibre-reinforced polymers (CFRP) results in an increased amount of CF waste from offcuts or end-of-life components. A promising method to reuse the waste fibre materials in a structural component with excellent mechanical properties is the processing of recycled CF (rCF) and thermoplastic fibres into hybrid yarns. Spinning of friction spun yarns consisting of more than 90% rCF and containing almost no thermoplastic fibres that are suitable for thermoset composites, currently leads to high fibre damage and low yarn quality and is, therefore, addressed in this project. The technology is reported in another paper. One of the limiting factors for drapability of textiles is the stretchability of continuous fibres and draping of the semi-finished textile products for complex geometries is still error-prone. Friction spun yarns exhibit significantly higher yarn elongations due to sliding mechanisms between the fibres. The deformation properties of friction spun yarns are significantly influenced by fibre-fibre interactions and depend on a variety of process and material parameters. In the following, micromechanical finite element models of the spun yarns are created by using beam elements. Monte Carlo method is used to model local variabilities in the yarns. The models are then used to simulate yarn behaviour under deformation and to investigate the influence of various process parameters.
{"title":"Micromechanical Modelling of the Deformation Mechanisms Friction-Spun Yarn from Recycled Carbon Fibres","authors":"Tobias Georg Lang, Mmb Hasan, A. Abdkader, C. Cherif, T. Gereke","doi":"10.4028/p-atiih0","DOIUrl":"https://doi.org/10.4028/p-atiih0","url":null,"abstract":"The growing use of carbon fibre-reinforced polymers (CFRP) results in an increased amount of CF waste from offcuts or end-of-life components. A promising method to reuse the waste fibre materials in a structural component with excellent mechanical properties is the processing of recycled CF (rCF) and thermoplastic fibres into hybrid yarns. Spinning of friction spun yarns consisting of more than 90% rCF and containing almost no thermoplastic fibres that are suitable for thermoset composites, currently leads to high fibre damage and low yarn quality and is, therefore, addressed in this project. The technology is reported in another paper. One of the limiting factors for drapability of textiles is the stretchability of continuous fibres and draping of the semi-finished textile products for complex geometries is still error-prone. Friction spun yarns exhibit significantly higher yarn elongations due to sliding mechanisms between the fibres. The deformation properties of friction spun yarns are significantly influenced by fibre-fibre interactions and depend on a variety of process and material parameters. In the following, micromechanical finite element models of the spun yarns are created by using beam elements. Monte Carlo method is used to model local variabilities in the yarns. The models are then used to simulate yarn behaviour under deformation and to investigate the influence of various process parameters.","PeriodicalId":18262,"journal":{"name":"Materials Science Forum","volume":"59 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140230298","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Fiber-reinforced plastics (FRP) are a type of composite material consisting of a reinforcing structure and a plastic matrix. When compared to traditional construction materials, FRP has higher strength and stiffness due to the high mechanical properties of reinforcing fibers such as carbon or glass. However, the properties of FRP are dependent on the alignment of fibers within the composite, with deviations leading to reduced strength and stiffness. Eddy current testing is a non-destructive technique used to visualize carbon fibers in the composite and assess the impact of local fiber orientation on the structural properties of FRP. This study aims to understand the influence of local fiber orientation on tensile strength and elastic modulus by producing composites with defined fiber orientations, analyzing them with eddy current testing, and assessing their mechanical properties through tensile tests. The measured fiber orientations are then used to validate a finite element model, in which the actual, measured fiber orientation is applied to the simulation and correlated with the mechanical properties. In contrast to previous published studies measured fiber orientation is used, which as shown in this work, differs from the theoretically implemented fiber orientation.
{"title":"Analysis of the Influence of Fiber Orientations in Carbon Fiber Reinforced Composites on their Structural Properties Based on Eddy Current Measurements","authors":"Johannes Mersch, T. Gereke, A. Nocke, C. Cherif","doi":"10.4028/p-euwyi2","DOIUrl":"https://doi.org/10.4028/p-euwyi2","url":null,"abstract":"Fiber-reinforced plastics (FRP) are a type of composite material consisting of a reinforcing structure and a plastic matrix. When compared to traditional construction materials, FRP has higher strength and stiffness due to the high mechanical properties of reinforcing fibers such as carbon or glass. However, the properties of FRP are dependent on the alignment of fibers within the composite, with deviations leading to reduced strength and stiffness. Eddy current testing is a non-destructive technique used to visualize carbon fibers in the composite and assess the impact of local fiber orientation on the structural properties of FRP. This study aims to understand the influence of local fiber orientation on tensile strength and elastic modulus by producing composites with defined fiber orientations, analyzing them with eddy current testing, and assessing their mechanical properties through tensile tests. The measured fiber orientations are then used to validate a finite element model, in which the actual, measured fiber orientation is applied to the simulation and correlated with the mechanical properties. In contrast to previous published studies measured fiber orientation is used, which as shown in this work, differs from the theoretically implemented fiber orientation.","PeriodicalId":18262,"journal":{"name":"Materials Science Forum","volume":"19 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140229106","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In recent years, great attention has been paid to the development of porous materials with excellent reactivity and absorbency. The poly(lactic acid) (PLA) microfibers with uniform nanopores were successfully prepared by rotary centrifugal spinning using PLA/chloroform solution. Previous research showed that PLA microfibers have extremely high oil absorbing capacity. In this study, the changes in fiber diameter and nanopore diameter of nanoporous PLA microfibers under different fabrication conditions and the adsorption capacity of Prussian blue nanoparticles were systematically evaluated. The results showed that the fiber diameter increased with increasing PLA/chloroform solution concentration. Furthermore, it was found that the amount of adsorbed Prussian blue nanoparticles increased with the increase in fiber diameter. Prussian blue nanoparticles are known to adsorb radioactive materials such as cesium, and are expected to be applied to the recovery of cesium diffused in the atmosphere and ocean.
{"title":"Characterization of Nanoporous Poly(Lactic Acid) Microfibers Using a Simplified Centrifugal Spinning Method","authors":"Kazushi Yamada, C. Narita","doi":"10.4028/p-fho6e7","DOIUrl":"https://doi.org/10.4028/p-fho6e7","url":null,"abstract":"In recent years, great attention has been paid to the development of porous materials with excellent reactivity and absorbency. The poly(lactic acid) (PLA) microfibers with uniform nanopores were successfully prepared by rotary centrifugal spinning using PLA/chloroform solution. Previous research showed that PLA microfibers have extremely high oil absorbing capacity. In this study, the changes in fiber diameter and nanopore diameter of nanoporous PLA microfibers under different fabrication conditions and the adsorption capacity of Prussian blue nanoparticles were systematically evaluated. The results showed that the fiber diameter increased with increasing PLA/chloroform solution concentration. Furthermore, it was found that the amount of adsorbed Prussian blue nanoparticles increased with the increase in fiber diameter. Prussian blue nanoparticles are known to adsorb radioactive materials such as cesium, and are expected to be applied to the recovery of cesium diffused in the atmosphere and ocean.","PeriodicalId":18262,"journal":{"name":"Materials Science Forum","volume":"58 22","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140231275","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：