Maxillofacial Plastic and Reconstructive Surgery最新文献

Background: Several osteotomies are required for orthognathic surgery to reposition the jaws correctly. This study aimed to evaluate whether Kinesiotaping can reduce swelling, pain, and trismus following orthognathic surgery of the facial skull.

Materials and methods: The present study consists of two phases. In the split-mouth phase, 16 skeletal class III patients underwent Bimax Orthognathic surgery, and Kinesiological tape (KT) was applied on one half of the face. In the prospective case-control phase, 30 patients were divided into two groups. Kinesio tape was applied on both sides of the face of the Kinesio group, and pressure dressing and ice therapy were used for the second group. The tape was parallel to the lower border of the mandible along its entire length, tangent to the labial commissure area on the studied side. The tape was placed in place for 5 days. Edema was evaluated by measuring the distance from the menton to the lower edge of the tragus. The maximum mouth-opening trismus was evaluated, and the VAS index was used to evaluate pain.

Results: There was evidence of swelling reduction after KT; within the same study, differences between the left and right sides as well as for the same side were statistically significant (p < 0.001). As a result of tapping lymphatic Kinesio tape on the affected area, tension was reduced, and lymphatic circulation was restored. Blood and lymph microcirculation was improved, enabling the body to heal itself.

Conclusion: Kinesio tape reduced swelling after orthognathic surgery in a positive way. As a simple, non-traumatic, economical method, Kinesio taping seems promising.

Background: Kissing molars (KMs) is defined as a state in which the apex of two impacted molars face opposite directions and the occlusal surfaces touch each other and the crown is in one follicle. Class III KMs have been reported previously; however, reports on class III KMs in young people (< 18 years of age) are limited.

Case presentation: Here, we present the case of KMs class III confirmed at an early age, supported by a review of the literature. The patient was a 16-year-old female and experienced discomfort in the left molar of the lower jaw and visited in our department. We diagnosed KMs based on an impacted teeth on the buccal side, near the lower jaw wisdom teeth, and a cyst-like low-density area observed around the crown of both teeth, as revealed by computed tomography. We decide to extract the tooth and enucleate the cyst under local anesthesia as the patient experienced discomfort due to occlusion. Furthermore, the cyst-like structure removal and tooth extraction including tooth root were necessary as the patient had KM class III, possibly inducing complicated malocclusion. Although no previous reports recommended timing for KMs tooth extraction, we propose that extraction at an early stage is important regardless of age especially in class III cases.

Conclusions: We report a case of KM class III detected at an early age.

Aims: The primary aim of the present study was to measure the discrepancy between the virtual and the actual position of the single-unit implants placed via a digitally-designed fully-guided surgical template using a flapless surgical technique. Prefabricated provisional restorations and periodontal factors were evaluated after the immediate loading of implants and 3 months after the surgery, respectively.

Materials and methods: Fourteen implants in nine patients were virtually planned after importing intraoral scans and cone-beam computed tomography (CBCT) records into 3D planning software. Accordingly, fully-guided surgical templates, customized abutments, and provisional restorations were designed and fabricated. The implant position after the surgery was compared with its virtual counterpart in terms of angular and apical linear deviations. Implants were immediately loaded after the surgery, and the occlusal level of the delivered provisional restorations was compared with their designed positions. Early implant failure, bleeding on probing, and peri-implant pockets were documented on the 3-month follow-up.

Results: A mean angular deviation of 5.07 ± 2.06° and a mean apical linear deviation of 1.74 ± 0.63 mm resulted. Two out of 14 implants failed within the first 3 months of the surgery, and the occlusal level difference was calculated for nine prefabricated provisional restorations.

Conclusions: DIONAVI protocol has been evaluated regarding its accuracy, and an estimation of the expected deviation is presented to the clinicians using this protocol. However, before widespread use, immediate-loading protocols and provisional restorations must be studied further.

Trial registration: IRCT, IRCT20211208053334N1. Registered 6 August 2022.

Background: Masticatory muscle tendon-aponeurosis hyperplasia (MMTAH) is a relatively newly identified clinical condition that manifests as trismus with a square-shaped mandible. Herein, we report a case of MMATH that was initially misdiagnosed for polymyositis due to trismus and simultaneous lower limb pain, with literature review.

Case presentation: A 30-year-old woman had a history of lower limb pain after exertion for 2 years. Initial physical examination had been performed at the Department of General Medicine in our hospital. There was also redness in the hands and fingers. Although polymyositis was suspected, it was denied. The patient visited our department for right maxillary wisdom tooth extraction. Clinical examination revealed that the patient had a square-shaped mandible. The maximal mouth opening was 22 mm. There was no temporomandibular joint pain at the time of opening. Furthermore, there was awareness of clenching while working. Panoramic radiography revealed developed square mandibular angles with flattened condyles. Computed tomography showed enlarged masseter muscles with high-density areas around the anterior and lateral fascia. Magnetic resonance imaging also showed thickened tendons and aponeuroses on the anterior surface and inside bilateral masseter muscles. Finally, the patient was diagnosed with MMTAH. Bilateral aponeurectomy of the masseter muscles with coronoidectomy and masseter muscle myotomy was performed under general anesthesia. The maximum opening during surgery was 48 mm. Mouth opening training was started on day 3 after surgery. Histopathological examination of the surgical specimen showed that the muscle fibers were enlarged to 60 μm. Immunohistochemistry testing for calcineurin, which was associated with muscle hypertrophy due to overload in some case reports, showed positive results. Twelve months after surgery, the mouth self-opening and forced opening were over 35 mm and 44 mm, respectively.

Conclusions: Herein, we report a case of MMATH. Lower limb pain due to prolonged standing at work and overload due to clenching were considered risk factors for symptoms onset of MMATH.

Background: Ameloblastic carcinoma is a malignant form of ameloblastoma and a very rare odontogenic tumor. We report a case of ameloblastic carcinoma that occurred after removal of a right-sided mandibular dental implant.

Case presentation: A 72-year-old female patient visited her family dentist with a complaint of pain around a lower right implant placed 37 years previously. Although the dental implant was removed with the diagnosis of peri-implantitis, the patient experienced dullness of sensation in the lower lip and was followed up by her dentist, but after no improvement. She was referred to a highly specialized institution where she was diagnosed with osteomyelitis and treated the patient with medication; however, there was no improvement. In addition, granulation was observed in the same area leading to a suspicion of malignancy, and the patient was referred to our oral cancer center. The diagnosis of squamous cell carcinoma was made after a biopsy at our hospital. Under general anesthesia, the patient underwent mandibulectomy, right-sided neck dissection, free flap reconstruction with an anterolateral thigh flap, immediate reconstruction with a metal plate, and tracheostomy. Histological analysis of the resected specimen on hematoxylin and eosin staining showed structures reminiscent of enamel pulp and squamous epithelium in the center of the tumor. The tumor cells were highly atypical, with nuclear staining, hypertrophy, irregular nuclear size, and irregular nuclear shape, all of which were suggestive of cancer. Immunohistochemical analysis showed that Ki-67 was expressed in more than 80% of the targeted area, and the final diagnosis was primary ameloblastic carcinoma.

Conclusion: After reconstructive flap transplantation, occlusion was re-established using a maxillofacial prosthesis. The patient remained disease-free at the 1-year 3-month follow-up.

Background: Resorption of alveolar bone is a common sequela of tooth loss and presents a clinical problem, especially in the esthetic zone. When ridge resorption occurs, adequate bone augmentation is essential to obtain satisfactory esthetic results. The purpose of this study was to determine the increase and retention rate of bone height or width in patients who received extensive bone augmentation and to analyze factors affecting its prognosis and stability.

Methods: This study was performed on patients who received extensive bone augmentation by sausage technique at the Department of Oral and Maxillofacial Surgery at Ewha Womans University Mok-dong Hospital from January 1, 2018, to February 28, 2022. CBCT images were taken before and 6 months after surgery to compare the amount of increase in bone height or width at the graft site. They were measured using reliable points such as adjacent implants or cephalometric landmarks, inferior alveolar nerve canals as reference points.

Results: A total of 8 patients underwent extensive bone grafting during the given period (mean age was 53.75 years, 2 males and 6 females). Four patients received horizontal augmentation, and 4 received vertical augmentation. When divided by surgical site, 4 patients are in maxilla and 4 in mandible. The average amount of increase in bone width or bone height was 5.38 mm, and the retention rate was about 79.9% after 6 months. The retention rate of horizontal augmentation was 88.8%, which was higher than that of vertical augmentation, which was 74.5%. The maxillary area accounted for 92.2%, and the amount of bone resorption was lower than that of the mandibular area, which was 72.6%. The average stitch out period was about 2.4 weeks, and postoperative dehiscence was observed about 37.5% of the total, more frequently in the mandible (50.0%) than in the maxilla (25.0%).

Conclusion: In conclusion, extensive bone augmentation achieved significant horizontal or vertical bone height or width increase, and the retention rate after 6 months was also high. In addition, surgery in the maxillary region showed a more successful bone augmentation than in the mandible, with a higher maintenance rate and fewer cases of dehiscence.

Background: Nanotechnology and nanomedicine are rising novel fields in plastic and reconstructive surgery (PRS). The use of nanomaterials often goes with regenerative medicine. Due to their nanoscale, these materials stimulate repair at the cellular and molecular levels. Nanomaterials may be placed as components of nanocomposite polymers allowing enhancement of overall biochemical and biomechanical properties with improved scaffold properties, cellular attachment, and tissue regeneration. They may also be formulated as nanoparticle-based delivery systems for controlled release of signal factors or antimicrobials, for example. However, more studies on nanoparticle-based delivery systems still need to be done in this field. Nanomaterials are also used as frameworks for nerves, tendons, and other soft tissues.

Main body: In this mini-review, we focus on nanoparticle-based delivery systems and nanoparticles targeting cells for response and regeneration in PRS. Specifically, we investigate their roles in various tissue regeneration, skin and wound healing, and infection control. Cell surface-targeted, controlled-release, and inorganic nanoparticle formulations with inherent biological properties have enabled enhanced wound healing, tumor visualization/imaging, tissue viability, and decreased infection, and graft/transplantation rejection through immunosuppression.

Conclusions: Nanomedicine is also now being applied with electronics, theranostics, and advanced bioengineering technologies. Overall, it is a promising field that can improve patient clinical outcomes in PRS.

Artificial intelligence (AI) refers to using technologies to simulate human cognition to solve a specific problem. The rapid development of AI in the health sector has been attributed to the improvement of computing speed, exponential increase in data production, and routine data collection. In this paper, we review the current applications of AI for oral and maxillofacial (OMF) cosmetic surgery to provide surgeons with the fundamental technical elements needed to understand its potential. AI plays an increasingly important role in OMF cosmetic surgery in various settings, and its usage may raise ethical issues. In addition to machine learning algorithms (a subtype of AI), convolutional neural networks (a subtype of deep learning) are widely used in OMF cosmetic surgeries. Depending on their complexity, these networks can extract and process the elementary characteristics of an image. They are, therefore, commonly used in the diagnostic process for medical images and facial photos. AI algorithms have been used to assist surgeons with diagnosis, therapeutic decisions, preoperative planning, and outcome prediction and evaluation. AI algorithms complement human skills while minimizing shortcomings through their capabilities to learn, classify, predict, and detect. This algorithm should, however, be rigorously evaluated clinically, and a systematic ethical reflection should be conducted regarding data protection, diversity, and transparency. It is possible to revolutionize the practice of functional and aesthetic surgeries with 3D simulation models and AI models. Planning, decision-making, and evaluation during and after surgery can be improved with simulation systems. A surgical AI model can also perform time-consuming or challenging tasks for surgeons.

Background: Medication-related osteonecrosis of the jaw (MRONJ) is one of the complications caused by various drugs. As there are increasing reports of MRONJ, it is important to diagnose and identify patients who have the potential risk of the disease. The aim of this study was to analyze the systemic diseases, etiology, and treatment results of MRONJ.

Material and methods: A total of 265 MRONJ operations were reviewed retrospectively. This study included patients who were diagnosed as MRONJ and those who also received surgery, ranging from simple extraction to reconstruction with free flaps, from 2009 to 2021. Each patient's systemic disease and eitology and basic demographic information was taken into consideration.

Results: The most common diseases related were osteoporosis (n = 127), breast cancer (n = 77), multiple myeloma (n = 27), prostate cancer (n = 26), and etc. (n = 12). The related causes of MRONJ were extraction (n = 138), implants (n = 40), and irritations by prosthesis (n = 29); however, 55 cases were occurred spontaneously. Out of 265 patients, 214 were women while 51 were men. The average age when the surgery took place was 67.7 and 69.8 years for male and female patients, respectively. Saucerization and sequestrectomy (n = 252) was the most common surgical treatment, followed by mandibulectomy (n = 12) and partial maxillectomy (n = 1). While 4 cases occurred in both jaws, 168 cases were in the mandible and 93 cases were in the maxilla.

Conclusion: Nearly 50 % of the MRONJ patients had osteoporosis and the other patients who received bone targeting agents parentral had bone metastasis of various cancers. Extraction is the most common related event for MRONJ.