首页 > 最新文献

Tissue Engineering Part A最新文献

英文 中文
Comparison of Chondrocytes in Knee Osteoarthritis and Regulation by Scaffold Pore Size and Stiffness. 膝关节骨性关节炎软骨细胞的比较及支架孔径和刚度的调节。
IF 4.1 Pub Date : 2021-02-01 Epub Date: 2020-11-25 DOI: 10.1089/ten.TEA.2020.0085
Yu Zhao, Zhifeng You, Dan Xing, Jiao Jiao Li, Qingxi Zhang, Hesuyuan Huang, Zhikun Li, Shumeng Jiang, Zhaozhao Wu, Yuying Zhang, Wenjing Li, Lin Zhang, Yanan Du, Jianhao Lin

In knee osteoarthritis (OA), there is more pronounced cartilage damage in the medial compartment ("lesion zone") than the lateral compartment ("remote zone"). This study fills a gap in the literature by conducting a systematic comparison of cartilage and chondrocyte characteristics from these two zones. It also investigates whether chondrocytes from the different zones respond distinctly to changes in the physical and mechanical microenvironment using three-dimensional porous scaffolds by changing stiffness and pore size. Cartilage was harvested from patients with end-stage varus knee OA. Cartilage from the lesion and remote zones were compared through histological and biomechanical assessments, and through proteomic and gene transcription analyses of chondrocytes. Gelatin scaffolds with varied pore sizes and stiffness were used to investigate in vitro microenvironmental regulation of chondrocytes from the two zones. Cartilage from the lesion and remote zones differed significantly (p < 0.05) in histological and biomechanical characteristics, as well as phenotype, protein, and gene expression of chondrocytes. Chondrocytes from both zones were sensitive to changes in the structural and mechanical properties of gelatin scaffolds. Of interest, although all chondrocytes better retained chondrocyte phenotype in stiffer scaffolds, those from the lesion and remote zones, respectively, preferred scaffolds with larger and smaller pores. Distinct variations exist in cartilage and chondrocyte characteristics in the lesion and remote zones of knee OA. Cells in these two zones respond differently to variations in the physical and mechanical microenvironment. Understanding and manipulating these differences will facilitate the development of more efficient and precise diagnostic and therapeutic approaches for knee OA.

在膝骨关节炎(OA)中,内侧隔室(“病变区”)的软骨损伤比外侧隔室(“远区”)更为明显。本研究通过对这两个区域的软骨和软骨细胞特征进行系统比较,填补了文献的空白。它还研究了来自不同区域的软骨细胞是否通过改变三维多孔支架的刚度和孔径来对物理和机械微环境的变化做出明显的反应。摘取终末期膝内翻OA患者的软骨。通过组织学和生物力学评估,以及软骨细胞的蛋白质组学和基因转录分析,对病变区和远处区的软骨进行比较。采用不同孔径和刚度的明胶支架,研究两区软骨细胞的体外微环境调控。病变区和远区软骨差异显著(p
{"title":"Comparison of Chondrocytes in Knee Osteoarthritis and Regulation by Scaffold Pore Size and Stiffness.","authors":"Yu Zhao,&nbsp;Zhifeng You,&nbsp;Dan Xing,&nbsp;Jiao Jiao Li,&nbsp;Qingxi Zhang,&nbsp;Hesuyuan Huang,&nbsp;Zhikun Li,&nbsp;Shumeng Jiang,&nbsp;Zhaozhao Wu,&nbsp;Yuying Zhang,&nbsp;Wenjing Li,&nbsp;Lin Zhang,&nbsp;Yanan Du,&nbsp;Jianhao Lin","doi":"10.1089/ten.TEA.2020.0085","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0085","url":null,"abstract":"<p><p>In knee osteoarthritis (OA), there is more pronounced cartilage damage in the medial compartment (\"lesion zone\") than the lateral compartment (\"remote zone\"). This study fills a gap in the literature by conducting a systematic comparison of cartilage and chondrocyte characteristics from these two zones. It also investigates whether chondrocytes from the different zones respond distinctly to changes in the physical and mechanical microenvironment using three-dimensional porous scaffolds by changing stiffness and pore size. Cartilage was harvested from patients with end-stage varus knee OA. Cartilage from the lesion and remote zones were compared through histological and biomechanical assessments, and through proteomic and gene transcription analyses of chondrocytes. Gelatin scaffolds with varied pore sizes and stiffness were used to investigate <i>in vitro</i> microenvironmental regulation of chondrocytes from the two zones. Cartilage from the lesion and remote zones differed significantly (<i>p</i> < 0.05) in histological and biomechanical characteristics, as well as phenotype, protein, and gene expression of chondrocytes. Chondrocytes from both zones were sensitive to changes in the structural and mechanical properties of gelatin scaffolds. Of interest, although all chondrocytes better retained chondrocyte phenotype in stiffer scaffolds, those from the lesion and remote zones, respectively, preferred scaffolds with larger and smaller pores. Distinct variations exist in cartilage and chondrocyte characteristics in the lesion and remote zones of knee OA. Cells in these two zones respond differently to variations in the physical and mechanical microenvironment. Understanding and manipulating these differences will facilitate the development of more efficient and precise diagnostic and therapeutic approaches for knee OA.</p>","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"223-236"},"PeriodicalIF":4.1,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0085","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"38049334","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 5
Optimized Media Volumes Enable Homogeneous Growth of Mesenchymal Stem Cell-Based Engineered Cartilage Constructs. 优化培养基体积使间充质干细胞工程软骨结构均匀生长。
IF 4.1 Pub Date : 2021-02-01 Epub Date: 2020-11-02 DOI: 10.1089/ten.TEA.2020.0123
Hannah M Zlotnick, Brendan D Stoeckl, Elizabeth A Henning, David R Steinberg, Robert L Mauck

Despite marked advances in the field of cartilage tissue engineering, it remains a challenge to engineer cartilage constructs with homogeneous properties. Moreover, for engineered cartilage to make it to the clinic, this homogeneous growth must occur in a time-efficient manner. In this study we investigated the potential of increased media volume to expedite the homogeneous maturation of mesenchymal stem cell (MSC) laden engineered constructs over time in vitro. We assessed the MSC-laden constructs after 4 and 8 weeks of chondrogenic culture using bulk mechanical, histological, and biochemical measures. These assays were performed on both the intact total constructs and the construct cores to elucidate region-dependent differences. In addition, local strain transfer was assessed to quantify depth-dependent mechanical properties throughout the constructs. Our findings suggest that increased media volume enhances matrix deposition early in culture and ameliorates unwanted regional heterogeneities at later time points. Taken together, these data support the use of higher media volumes during in vitro culture to hasten tissue maturation and increase the core strength of tissue constructs. These findings will forward the field of cartilage tissue engineering and the translation of tissue engineered constructs.

尽管软骨组织工程领域取得了显著进展,但要使软骨结构具有均匀性仍然是一个挑战。此外,为了使工程软骨进入临床,这种均匀生长必须以一种高效的方式进行。在这项研究中,我们研究了随着时间的推移,增加培养基容量加速间充质干细胞(MSC)负载工程构建物在体外均匀成熟的潜力。在4周和8周的软骨培养后,我们使用大量的机械、组织学和生化指标来评估msc负载构建物。这些分析是在完整的总结构和结构核心上进行的,以阐明区域依赖性差异。此外,还评估了局部应变传递,以量化整个结构中与深度相关的力学性能。我们的研究结果表明,培养基体积的增加可以在培养早期促进基质沉积,并在后期改善不必要的区域异质性。综上所述,这些数据支持在体外培养过程中使用更高的培养基体积来加速组织成熟并增加组织构建体的核心强度。这些发现将推动软骨组织工程领域的发展和组织工程构建的转化。
{"title":"Optimized Media Volumes Enable Homogeneous Growth of Mesenchymal Stem Cell-Based Engineered Cartilage Constructs.","authors":"Hannah M Zlotnick,&nbsp;Brendan D Stoeckl,&nbsp;Elizabeth A Henning,&nbsp;David R Steinberg,&nbsp;Robert L Mauck","doi":"10.1089/ten.TEA.2020.0123","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0123","url":null,"abstract":"<p><p>Despite marked advances in the field of cartilage tissue engineering, it remains a challenge to engineer cartilage constructs with homogeneous properties. Moreover, for engineered cartilage to make it to the clinic, this homogeneous growth must occur in a time-efficient manner. In this study we investigated the potential of increased media volume to expedite the homogeneous maturation of mesenchymal stem cell (MSC) laden engineered constructs over time <i>in vitro</i>. We assessed the MSC-laden constructs after 4 and 8 weeks of chondrogenic culture using bulk mechanical, histological, and biochemical measures. These assays were performed on both the intact total constructs and the construct cores to elucidate region-dependent differences. In addition, local strain transfer was assessed to quantify depth-dependent mechanical properties throughout the constructs. Our findings suggest that increased media volume enhances matrix deposition early in culture and ameliorates unwanted regional heterogeneities at later time points. Taken together, these data support the use of higher media volumes during <i>in vitro</i> culture to hasten tissue maturation and increase the core strength of tissue constructs. These findings will forward the field of cartilage tissue engineering and the translation of tissue engineered constructs.</p>","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"214-222"},"PeriodicalIF":4.1,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0123","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"38058383","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Three-Dimensional Otic Neuronal Progenitor Spheroids Derived from Human Embryonic Stem Cells. 由人胚胎干细胞衍生的三维耳神经祖球体。
IF 4.1 Pub Date : 2021-02-01 Epub Date: 2020-08-07 DOI: 10.1089/ten.TEA.2020.0078
Rachel A Heuer, Kevin T Nella, Hsiang-Tsun Chang, Kyle S Coots, Andrew M Oleksijew, Christian B Roque, Luisa H A Silva, Tammy L McGuire, Kazuaki Homma, Akihiro J Matsuoka

Stem cell-replacement therapies have been proposed as a potential tool to treat sensorineural hearing loss by aiding the regeneration of spiral ganglion neurons (SGNs) in the inner ear. However, transplantation procedures have yet to be explored thoroughly to ensure proper cell differentiation and optimal transplant procedures. We hypothesized that the aggregation of human embryonic stem cell (hESC)-derived otic neuronal progenitor (ONP) cells into a multicellular form would improve their function and their survival in vivo post-transplantation. We generated hESC-derived ONP spheroids-an aggregate form conducive to differentiation, transplantation, and prolonged cell survival-to optimize conditions for their transplantation. Our findings indicate that these cell spheroids maintain the molecular and functional characteristics similar to those of ONP cells, which are upstream in the SGN lineage. Moreover, our phenotypical, electrophysiological, and mechanical data suggest an optimal spheroid transplantation point after 7 days of in vitro three-dimensional (3D) culture. We have also developed a feasible transplantation protocol for these spheroids using a micropipette aided by a digital microinjection system. In summary, the present work demonstrates that the transplantation of ONP cells in spheroid form into the inner ear through micropipette 7 days after seeding for 3D spheroid culture is an expedient and viable method for stem cell replacement therapies in the inner ear.

干细胞替代疗法被认为是通过帮助内耳螺旋神经节神经元(sgn)再生来治疗感音神经性听力损失的潜在工具。然而,移植程序尚未被彻底探索,以确保适当的细胞分化和最佳的移植程序。我们假设人类胚胎干细胞(hESC)衍生的胚胎神经祖细胞(ONP)聚集成多细胞形式可以改善其功能和移植后在体内的存活。我们生成了hesc衍生的ONP球体——一种有利于分化、移植和延长细胞存活的聚集形式——以优化其移植条件。我们的研究结果表明,这些细胞球体保持了与SGN谱系上游的ONP细胞相似的分子和功能特征。此外,我们的表型、电生理和力学数据表明,体外三维(3D)培养7天后是最佳的球体移植点。我们还开发了一个可行的移植方案,这些球体使用微移液管辅助的数字显微注射系统。综上所述,本研究表明,在播种后7天通过微管将球形ONP细胞移植到内耳进行三维球形培养是一种方便可行的内耳干细胞替代治疗方法。
{"title":"Three-Dimensional Otic Neuronal Progenitor Spheroids Derived from Human Embryonic Stem Cells.","authors":"Rachel A Heuer,&nbsp;Kevin T Nella,&nbsp;Hsiang-Tsun Chang,&nbsp;Kyle S Coots,&nbsp;Andrew M Oleksijew,&nbsp;Christian B Roque,&nbsp;Luisa H A Silva,&nbsp;Tammy L McGuire,&nbsp;Kazuaki Homma,&nbsp;Akihiro J Matsuoka","doi":"10.1089/ten.TEA.2020.0078","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0078","url":null,"abstract":"<p><p>Stem cell-replacement therapies have been proposed as a potential tool to treat sensorineural hearing loss by aiding the regeneration of spiral ganglion neurons (SGNs) in the inner ear. However, transplantation procedures have yet to be explored thoroughly to ensure proper cell differentiation and optimal transplant procedures. We hypothesized that the aggregation of human embryonic stem cell (hESC)-derived otic neuronal progenitor (ONP) cells into a multicellular form would improve their function and their survival <i>in vivo</i> post-transplantation. We generated hESC-derived ONP spheroids-an aggregate form conducive to differentiation, transplantation, and prolonged cell survival-to optimize conditions for their transplantation. Our findings indicate that these cell spheroids maintain the molecular and functional characteristics similar to those of ONP cells, which are upstream in the SGN lineage. Moreover, our phenotypical, electrophysiological, and mechanical data suggest an optimal spheroid transplantation point after 7 days of <i>in vitro</i> three-dimensional (3D) culture. We have also developed a feasible transplantation protocol for these spheroids using a micropipette aided by a digital microinjection system. In summary, the present work demonstrates that the transplantation of ONP cells in spheroid form into the inner ear through micropipette 7 days after seeding for 3D spheroid culture is an expedient and viable method for stem cell replacement therapies in the inner ear.</p>","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"256-269"},"PeriodicalIF":4.1,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0078","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"38086202","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 7
Coral-Derived Collagen Fibers for Engineering Aligned Tissues. 用于工程排列组织的珊瑚源性胶原纤维。
IF 4.1 Pub Date : 2021-02-01 Epub Date: 2020-08-06 DOI: 10.1089/ten.TEA.2020.0116
Ortal Shelah, Shir Wertheimer, Rami Haj-Ali, Ayelet Lesman

There is a growing need for biomaterial scaffolds that support engineering of soft tissue substitutes featuring structure and mechanical properties similar to those of the native tissue. This work introduces a new biomaterial system that is based on centimeter-long collagen fibers extracted from Sarcophyton soft corals, wrapped around frames to create aligned fiber arrays. The collagen arrays displayed hyperelastic and viscoelastic mechanical properties that resembled those of collagenous-rich tissues. Cytotoxicity tests demonstrated that the collagen arrays were nontoxic to fibroblast cells. In addition, fibroblast cells seeded on the collagen arrays demonstrated spreading and increased growth for up to 40 days, and their orientation followed that of the aligned fibers. The possibility to combine the collagen cellular arrays with poly(ethylene glycol) diacrylate (PEG-DA) hydrogel, to create integrated biocomposites, was also demonstrated. This study showed that coral collagen fibers in combination with a hydrogel can support biological tissue-like growth, with predefined orientation over a long period of time in culture. As such, it is an attractive scaffold for the construction of various engineered tissues to match their native oriented morphology.

越来越多的人需要生物材料支架来支持软组织替代品的工程,这些替代品具有与天然组织相似的结构和机械性能。这项工作介绍了一种新的生物材料系统,该系统基于从石藻软珊瑚中提取的厘米长的胶原纤维,包裹在框架周围以形成排列的纤维阵列。胶原阵列表现出与富含胶原的组织相似的超弹性和粘弹性力学特性。细胞毒性试验表明,胶原蛋白阵列对成纤维细胞无毒。此外,在胶原蛋白阵列上播种的成纤维细胞在长达40天的时间里表现出扩散和生长的增加,并且它们的方向与排列的纤维一致。此外,还展示了将胶原细胞阵列与聚乙二醇二丙烯酸酯(PEG-DA)水凝胶相结合以创建集成生物复合材料的可能性。本研究表明,珊瑚胶原纤维与水凝胶结合可以支持生物组织样生长,在长时间的培养中具有预定义的方向。因此,它是一种有吸引力的支架,用于构建各种工程组织,以匹配其原生取向形态。
{"title":"Coral-Derived Collagen Fibers for Engineering Aligned Tissues.","authors":"Ortal Shelah,&nbsp;Shir Wertheimer,&nbsp;Rami Haj-Ali,&nbsp;Ayelet Lesman","doi":"10.1089/ten.TEA.2020.0116","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0116","url":null,"abstract":"<p><p>There is a growing need for biomaterial scaffolds that support engineering of soft tissue substitutes featuring structure and mechanical properties similar to those of the native tissue. This work introduces a new biomaterial system that is based on centimeter-long collagen fibers extracted from <i>Sarcophyton</i> soft corals, wrapped around frames to create aligned fiber arrays. The collagen arrays displayed hyperelastic and viscoelastic mechanical properties that resembled those of collagenous-rich tissues. Cytotoxicity tests demonstrated that the collagen arrays were nontoxic to fibroblast cells. In addition, fibroblast cells seeded on the collagen arrays demonstrated spreading and increased growth for up to 40 days, and their orientation followed that of the aligned fibers. The possibility to combine the collagen cellular arrays with poly(ethylene glycol) diacrylate (PEG-DA) hydrogel, to create integrated biocomposites, was also demonstrated. This study showed that coral collagen fibers in combination with a hydrogel can support biological tissue-like growth, with predefined orientation over a long period of time in culture. As such, it is an attractive scaffold for the construction of various engineered tissues to match their native oriented morphology.</p>","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"187-200"},"PeriodicalIF":4.1,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0116","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"38032460","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 8
Anticytokine Activity Enhances Osteogenesis of Bioactive Implants. 抗细胞因子活性促进生物活性植入物成骨。
IF 4.1 Pub Date : 2021-02-01 Epub Date: 2020-11-06 DOI: 10.1089/ten.TEA.2020.0067
Fan Yang, Xin Zhang, Hairong Huang, Gang Wu, Kurt Lippuner, Ernst B Hunziker

In dental clinical practice, systemic steroids are often applied at the end of implant surgeries to reduce postsurgical inflammation (tissue swelling, etc.) and to reduce patient discomfort. However, the use of systemic steroids is associated with generalized catabolic effects and with a temporarily reduced immunological competence. We hypothesize that by applying locally anticytokine antibodies (antitumor necrosis factor alpha and anti-interleukin-1 beta) together with a bioactive osteogenic implant at the time of the surgical intervention for the placement of a construct, we will be able to achieve the same beneficial effects as those using systemic steroids but are able to avoid the generalized antianabolic effects and the reduced immunocompetence effects, associated with the systemic use of steroids. In an adult rat model, a collagen sponge, soaked with the osteogenic agent bone morphogenetic protein-2, was used as an example for a bioactive implant material and was surgically placed subcutaneously. In the acute inflammatory phase after implantation (2 days after surgery) we investigated the local inflammatory tissue response, and 18 days postsurgically the efficiency of local osteogenesis (to assess possible antianabolic effects). We found that the negative control groups, treated postsurgically with systemic steroids, showed a significant suppression of both the inflammatory response and the osteogenetic activity, that is, they were associated with significant general antianabolic effects, even when steroids were used only at a low dose level. The local anticytokine treatment, however, was able to significantly enhance new bone formation activity, that is, the anabolic activity, over positive control values with BMP-2 only. However, the anticytokine treatment was unable to reduce the local inflammatory and swelling responses.

在牙科临床实践中,通常在种植体手术结束时使用全身性类固醇,以减少术后炎症(组织肿胀等),减少患者的不适感。然而,全身性类固醇的使用与广泛的分解代谢作用和暂时降低免疫能力有关。我们假设,通过在手术干预时使用局部抗细胞因子抗体(抗肿瘤坏死因子α和抗白细胞介素-1 β)与生物活性成骨植入物一起放置构建体,我们将能够获得与使用全身类固醇相同的有益效果,但能够避免全身使用类固醇相关的广泛性抗合成代谢作用和免疫能力降低的影响。在成年大鼠模型中,以胶原海绵为例,用成骨剂骨形态发生蛋白-2浸泡,作为生物活性植入材料,并通过手术植入皮下。在植入后的急性炎症期(术后2天),我们研究了局部炎症组织反应,以及术后18天局部成骨的效率(以评估可能的抗合成代谢作用)。我们发现,阴性对照组,术后接受全身类固醇治疗,显示炎症反应和成骨活性的显著抑制,也就是说,它们与显著的一般抗合成代谢作用相关,即使仅以低剂量使用类固醇。然而,与仅使用BMP-2的阳性对照组相比,局部抗细胞因子治疗能够显著提高新骨形成活性,即合成代谢活性。然而,抗细胞因子治疗不能减轻局部炎症和肿胀反应。
{"title":"Anticytokine Activity Enhances Osteogenesis of Bioactive Implants.","authors":"Fan Yang,&nbsp;Xin Zhang,&nbsp;Hairong Huang,&nbsp;Gang Wu,&nbsp;Kurt Lippuner,&nbsp;Ernst B Hunziker","doi":"10.1089/ten.TEA.2020.0067","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0067","url":null,"abstract":"<p><p>In dental clinical practice, systemic steroids are often applied at the end of implant surgeries to reduce postsurgical inflammation (tissue swelling, etc.) and to reduce patient discomfort. However, the use of systemic steroids is associated with generalized catabolic effects and with a temporarily reduced immunological competence. We hypothesize that by applying locally anticytokine antibodies (antitumor necrosis factor alpha and anti-interleukin-1 beta) together with a bioactive osteogenic implant at the time of the surgical intervention for the placement of a construct, we will be able to achieve the same beneficial effects as those using systemic steroids but are able to avoid the generalized antianabolic effects and the reduced immunocompetence effects, associated with the systemic use of steroids. In an adult rat model, a collagen sponge, soaked with the osteogenic agent bone morphogenetic protein-2, was used as an example for a bioactive implant material and was surgically placed subcutaneously. In the acute inflammatory phase after implantation (2 days after surgery) we investigated the local inflammatory tissue response, and 18 days postsurgically the efficiency of local osteogenesis (to assess possible antianabolic effects). We found that the negative control groups, treated postsurgically with systemic steroids, showed a significant suppression of both the inflammatory response and the osteogenetic activity, that is, they were associated with significant general antianabolic effects, even when steroids were used only at a low dose level. The local anticytokine treatment, however, was able to significantly enhance new bone formation activity, that is, the anabolic activity, over positive control values with BMP-2 only. However, the anticytokine treatment was unable to reduce the local inflammatory and swelling responses.</p>","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"177-186"},"PeriodicalIF":4.1,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0067","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"38047255","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Chondrogenic Predifferentiation Inhibits Vascular Endothelial Growth Factor Angiogenic Effect in Pericranium-Derived Spheroids. 软骨预分化抑制血管内皮生长因子在包皮衍生球体中的血管生成作用。
IF 4.1 Pub Date : 2021-02-01 Epub Date: 2020-11-05 DOI: 10.1089/ten.TEA.2020.0117
Serban San-Marina, Christopher M Prummer, Stephen G Voss, Danielle E Hunter, Benjamin J Madden, Mary Cristine Charlesworth, Dale C Ekbom, Jeffrey R Janus

Craniofacial reconstruction of critical bone defects typically requires a bone graft. As graft availability may be restricted by disease or comorbidities, tissue engineering approaches are actively sought. The pericranium could provide new bone graft material. During development and repair, bone transitions through a chondrogenic phase. However, with tissue engineering, pluripotent cells can differentiate directly into bone cells. Does ability to recapitulate bone formation in vitro affect osteogenesis and vascularization of pericranium grafts? To answer this, we obtained tissue from nine patients with preplanned craniotomy surgery and studied three-dimensional osteogenesis and angiogenesis of pericranium-derived spheroids. First, we established growth and differentiation conditions on Matrigel. For each spheroid sample, we investigated (i) continuous osteogenic differentiation (COD) and (ii) osteogenic differentiation preceded by chondrogenesis (CD → OD). The effect of vascular endothelial growth factor (VEGF) was compared to VEGF supplemented with fibroblast growth factor, interleukin (IL)-1, IL-6, platelet-derived growth factor, and tumor necrosis factor-α, a growth factor mix (GFM) with possible synergistic effects. In this limited sample, we observed no age- or sex-related differences in cell expansion. Similarly, no statistically significant differences in osteogenic or angiogenic scores between COD or CD → OD spheroids were noted with regular media. In COD, however, VEGF statistically significantly increased angiogenesis compared to control media (p = 0.007). Also, in COD, both VEGF and VEGF + GFM increased osteogenesis (p = 0.047 and p = 0.038, respectively). By contrast, in CD → OD, neither VEGF nor VEGF + GFM yielded statistically significant angiogenesis or osteogenesis scores compared to control media. To understand these results, we characterized spheroid protein expression by nanoliquid chromatography coupled to tandem mass spectrometry. Nine angiogenic proteins were either uniquely expressed or upregulated in COD compared to CD → OD: (i) endothelial markers JUP, PTGIS, PTGS2, and TYMP, (ii) tissue remodeling factors CHI3L1 and MMP14, and (iii) metabolic pathways modulators ANGPTL4, ITGA5, and WNT5A. ANGPTL4, ITGA5, PTGIS, PTGS2, and WNT5A define a conserved angiogenic network and were >2-fold increased in VEGF compared to VEGF + GFM. Finally, we examined bone formation on printable poly-(propylene-fumarate) (PPF) scaffolds for individualized grafting. Under COD + VEGF conditions, PPF scaffolds loaded with pericranium-derived cells displayed hallmarks of spongiform-like bone formation. Thus, the human pericranium may be a potential repository for bone-generating cells with applications in craniofacial bone repair using tissue printing.

严重骨缺损的颅面重建通常需要骨移植。由于移植物的可用性可能受到疾病或合并症的限制,组织工程方法正在积极寻求。颅周可提供新的骨移植材料。在发育和修复过程中,骨会经历成软骨期。然而,通过组织工程,多能细胞可以直接分化为骨细胞。体外再现骨形成的能力是否影响骨周移植物的成骨和血管化?为了回答这个问题,我们从9例预先计划开颅手术的患者身上获得了组织,并研究了包皮衍生球体的三维成骨和血管生成。首先,我们在Matrigel上建立了生长和分化条件。对于每个球体样本,我们研究了(i)连续成骨分化(COD)和(ii)成骨分化之前的软骨形成(CD→OD)。将血管内皮生长因子(VEGF)的作用与VEGF与成纤维细胞生长因子、白细胞介素(IL)-1、IL-6、血小板源性生长因子和肿瘤坏死因子-α(一种可能具有协同作用的生长因子混合物)的作用进行比较。在这个有限的样本中,我们观察到细胞扩增没有年龄或性别相关的差异。同样,COD和CD→OD球体在成骨和血管生成评分上没有统计学上的显著差异。然而,在COD中,与对照组相比,VEGF显著增加了血管生成(p = 0.007)。在COD中,VEGF和VEGF + GFM均能促进成骨(p = 0.047和p = 0.038)。相比之下,在CD→OD组中,VEGF和VEGF + GFM均未产生统计学意义上的血管生成或成骨评分。为了理解这些结果,我们利用纳米液相色谱-串联质谱技术对球状蛋白的表达进行了表征。与CD→OD相比,9种血管生成蛋白在COD中表达或上调:(i)内皮标志物JUP、PTGIS、PTGS2和TYMP, (ii)组织重塑因子CHI3L1和MMP14,以及(iii)代谢途径调节剂ANGPTL4、ITGA5和WNT5A。ANGPTL4、ITGA5、PTGIS、PTGS2和WNT5A定义了一个保守的血管生成网络,与VEGF + GFM相比,VEGF增加了2倍以上。最后,我们研究了在可打印的聚富马酸丙酯(PPF)支架上进行个体化移植的骨形成。在COD + VEGF条件下,载有包皮来源细胞的PPF支架表现出海绵状骨形成的特征。因此,利用组织打印技术在颅面骨修复中,人的头盖骨可能是一个潜在的骨生成细胞储存库。
{"title":"Chondrogenic Predifferentiation Inhibits Vascular Endothelial Growth Factor Angiogenic Effect in Pericranium-Derived Spheroids.","authors":"Serban San-Marina,&nbsp;Christopher M Prummer,&nbsp;Stephen G Voss,&nbsp;Danielle E Hunter,&nbsp;Benjamin J Madden,&nbsp;Mary Cristine Charlesworth,&nbsp;Dale C Ekbom,&nbsp;Jeffrey R Janus","doi":"10.1089/ten.TEA.2020.0117","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0117","url":null,"abstract":"<p><p>Craniofacial reconstruction of critical bone defects typically requires a bone graft. As graft availability may be restricted by disease or comorbidities, tissue engineering approaches are actively sought. The pericranium could provide new bone graft material. During development and repair, bone transitions through a chondrogenic phase. However, with tissue engineering, pluripotent cells can differentiate directly into bone cells. Does ability to recapitulate bone formation <i>in vitro</i> affect osteogenesis and vascularization of pericranium grafts? To answer this, we obtained tissue from nine patients with preplanned craniotomy surgery and studied three-dimensional osteogenesis and angiogenesis of pericranium-derived spheroids. First, we established growth and differentiation conditions on Matrigel. For each spheroid sample, we investigated (i) continuous osteogenic differentiation (COD) and (ii) osteogenic differentiation preceded by chondrogenesis (CD → OD). The effect of vascular endothelial growth factor (VEGF) was compared to VEGF supplemented with fibroblast growth factor, interleukin (IL)-1, IL-6, platelet-derived growth factor, and tumor necrosis factor-α, a growth factor mix (GFM) with possible synergistic effects. In this limited sample, we observed no age- or sex-related differences in cell expansion. Similarly, no statistically significant differences in osteogenic or angiogenic scores between COD or CD → OD spheroids were noted with regular media. In COD, however, VEGF statistically significantly increased angiogenesis compared to control media (<i>p</i> = 0.007). Also, in COD, both VEGF and VEGF + GFM increased osteogenesis (<i>p</i> = 0.047 and <i>p</i> = 0.038, respectively). By contrast, in CD → OD, neither VEGF nor VEGF + GFM yielded statistically significant angiogenesis or osteogenesis scores compared to control media. To understand these results, we characterized spheroid protein expression by nanoliquid chromatography coupled to tandem mass spectrometry. Nine angiogenic proteins were either uniquely expressed or upregulated in COD compared to CD → OD: (i) endothelial markers JUP, PTGIS, PTGS2, and TYMP, (ii) tissue remodeling factors CHI3L1 and MMP14, and (iii) metabolic pathways modulators ANGPTL4, ITGA5, and WNT5A. ANGPTL4, ITGA5, PTGIS, PTGS2, and WNT5A define a conserved angiogenic network and were >2-fold increased in VEGF compared to VEGF + GFM. Finally, we examined bone formation on printable poly-(propylene-fumarate) (PPF) scaffolds for individualized grafting. Under COD + VEGF conditions, PPF scaffolds loaded with pericranium-derived cells displayed hallmarks of spongiform-like bone formation. Thus, the human pericranium may be a potential repository for bone-generating cells with applications in craniofacial bone repair using tissue printing.</p>","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"237-245"},"PeriodicalIF":4.1,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0117","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"38132123","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Impact of Release Kinetics on Efficacy of Locally Delivered Parathyroid Hormone for Bone Regeneration Applications. 释放动力学对局部递送甲状旁腺激素骨再生应用效果的影响。
IF 4.1 Pub Date : 2021-02-01 Epub Date: 2020-09-10 DOI: 10.1089/ten.TEA.2020.0119
Samantha J Wojda, Ian A Marozas, Kristi S Anseth, Michael J Yaszemski, Seth W Donahue

Characterizing the release profile for materials-directed local delivery of bioactive molecules and its effect on bone regeneration is an important step to improve our understanding of, and ability to optimize, the bone healing response. This study examined the local delivery of parathyroid hormone (PTH) using a thiol-ene hydrogel embedded in a porous poly(propylene fumarate) (PPF) scaffold for bone regeneration applications. The aim of this study was to characterize the degradation-controlled in vitro release kinetics of PTH from the thiol-ene hydrogels, in vivo hydrogel degradation in a subcutaneous implant model, and bone healing in a rat critical size bone defect. Tethering PTH to the hydrogel matrix eliminated the early timepoint burst release that was observed in previous in vitro work where PTH was free to diffuse out of the matrix. Only 8% of the tethered PTH was released from the hydrogel during the first 2 weeks, but by day 21, 80% of the PTH was released, and complete release was achieved by day 28. In vivo implantation revealed that complete degradation of the hydrogel alone occurred by day 21; however, when incorporated in a three-dimensional printed osteoconductive PPF scaffold, the hydrogel persisted for >56 days. Treatment of bone defects with the composite thiol-ene hydrogel-PPF scaffold, delivering either 3 or 10 μg of tethered PTH 1-84, was found to increase bridging of critical size bone defects, whereas treatment with 30 μg of tethered PTH resulted in less bone ingrowth into the defect area. Continued development of this biomaterial delivery system for PTH could lead to improved therapies for treatment of nonunion fractures and critical size bone defects.

表征材料定向局部递送生物活性分子的释放特征及其对骨再生的影响是提高我们对骨愈合反应的理解和优化能力的重要一步。本研究使用嵌入多孔聚富马酸丙烯(PPF)支架的巯基水凝胶检测甲状旁腺激素(PTH)的局部递送,用于骨再生应用。本研究的目的是表征巯基水凝胶中PTH的体外降解控制释放动力学,皮下植入模型中的体内水凝胶降解以及大鼠临界大小骨缺损的骨愈合。将甲状旁腺激素捆绑在水凝胶基质上,消除了在先前的体外研究中观察到的甲状旁腺激素自由扩散出基质的早期时间点爆发释放。在最初的2周内,只有8%的PTH从水凝胶中释放出来,但到第21天,80%的PTH被释放,到第28天完全释放。体内植入显示,水凝胶在第21天完全降解;然而,当将水凝胶掺入三维打印的骨导电性PPF支架中时,水凝胶的持续时间>56天。研究发现,使用复合巯基水凝胶- ppf支架治疗骨缺损时,给予3或10 μg的栓系PTH 1-84,可增加临界大小骨缺损的桥接,而使用30 μg的栓系PTH治疗可减少骨长入缺损区域。这种用于甲状旁腺激素的生物材料递送系统的持续发展可能会导致治疗骨不连骨折和临界大小骨缺损的方法的改进。
{"title":"Impact of Release Kinetics on Efficacy of Locally Delivered Parathyroid Hormone for Bone Regeneration Applications.","authors":"Samantha J Wojda,&nbsp;Ian A Marozas,&nbsp;Kristi S Anseth,&nbsp;Michael J Yaszemski,&nbsp;Seth W Donahue","doi":"10.1089/ten.TEA.2020.0119","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0119","url":null,"abstract":"<p><p>Characterizing the release profile for materials-directed local delivery of bioactive molecules and its effect on bone regeneration is an important step to improve our understanding of, and ability to optimize, the bone healing response. This study examined the local delivery of parathyroid hormone (PTH) using a thiol-ene hydrogel embedded in a porous poly(propylene fumarate) (PPF) scaffold for bone regeneration applications. The aim of this study was to characterize the degradation-controlled <i>in vitro</i> release kinetics of PTH from the thiol-ene hydrogels, <i>in vivo</i> hydrogel degradation in a subcutaneous implant model, and bone healing in a rat critical size bone defect. Tethering PTH to the hydrogel matrix eliminated the early timepoint burst release that was observed in previous <i>in vitro</i> work where PTH was free to diffuse out of the matrix. Only 8% of the tethered PTH was released from the hydrogel during the first 2 weeks, but by day 21, 80% of the PTH was released, and complete release was achieved by day 28. <i>In vivo</i> implantation revealed that complete degradation of the hydrogel alone occurred by day 21; however, when incorporated in a three-dimensional printed osteoconductive PPF scaffold, the hydrogel persisted for >56 days. Treatment of bone defects with the composite thiol-ene hydrogel-PPF scaffold, delivering either 3 or 10 μg of tethered PTH 1-84, was found to increase bridging of critical size bone defects, whereas treatment with 30 μg of tethered PTH resulted in less bone ingrowth into the defect area. Continued development of this biomaterial delivery system for PTH could lead to improved therapies for treatment of nonunion fractures and critical size bone defects.</p>","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"246-255"},"PeriodicalIF":4.1,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0119","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"38113262","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
The Effects of Topographic Micropatterning on Endothelial Colony-Forming Cells. 地形微图纹对内皮细胞集落形成的影响。
IF 4.1 Pub Date : 2021-02-01 Epub Date: 2020-09-10 DOI: 10.1089/ten.TEA.2020.0066
Matthew W Hagen, Monica T Hinds

Artificial small-diameter vascular grafts remain an unmet need in modern medicine, due to the thrombosis and neointimal hyperplasia that plague currently available synthetic devices. Tissue engineering techniques, including in vitro endothelialization, could offer a solution to this problem. A potential minimally invasive source of patient autologous endothelium is endothelial colony-forming cells (ECFCs), endothelial-like outgrowth products of circulating progenitors. While ECFCs respond to shear stress similar to mature endothelial cells (ECs), their response to luminal topographic micropatterning (TMP), a biomaterial modification with the potential to flow-independently, enhance the attachment, migration, gene expression, and function of mature ECs, remains unstudied. In this study, case-matched carotid endothelial cells (CaECs) and blood-derived ECFCs are statically cultured on polyurethane substrates with micropatterned pitches (pitch = peak to peak distance) ranging from 3-to 14 μm. On all pattern pitches tested, both CaECs and ECFCs showed significant and robust alignment to the angle of the micropatterns. Using a novel cell-by-cell image analysis technique, it was found that actin fibers similarly and significantly aligned to the angle of micropatterned features on all pitches tested. Microtubules analyzed through the same novel approach showed significant alignment on most pitches examined, with a greater variation in fiber angle overall. Interestingly, only CaECs showed significant cellular elongation, and notably to a lower degree than previously seen either in vivo due to flow or in vitro due to spatial growth restriction micropatterning, but consistent with earlier studies of TMP. Neither cell type displayed any significant micropattern-driven changes in the expression of KLF-2 or the downstream adhesion molecules it regulates. These results demonstrate that TMP flow-independently affects ECFC morphology, but that alignment alone is insufficient to drive protective changes in EC and ECFC function.

由于血栓形成和新生内膜增生困扰着目前可用的合成装置,人工小直径血管移植在现代医学中仍然是一个未满足的需求。组织工程技术,包括体外内皮化,可以解决这个问题。患者自体内皮的潜在微创来源是内皮集落形成细胞(ECFCs),即循环祖细胞的内皮样产物。虽然ecfc对剪切应力的反应与成熟内皮细胞(ECs)相似,但它们对管腔地形微模式(TMP)的反应仍未研究,TMP是一种具有独立流动潜力的生物材料修饰,可以增强成熟内皮细胞的附着、迁移、基因表达和功能。在这项研究中,病例匹配的颈动脉内皮细胞(CaECs)和血液来源的ecfc在聚氨酯基质上静态培养,其间距(间距=峰与峰之间的距离)范围为3至14 μm。在所有的模式间距测试中,caec和ecfc都显示出与微模式角度的显著和稳健的对齐。使用一种新颖的逐细胞图像分析技术,发现肌动蛋白纤维在所有测试的球场上都与微图案特征的角度相似且显著对齐。通过同样的新方法分析的微管显示,在大多数检查的螺距上,纤维角度的变化更大。有趣的是,只有caec表现出显著的细胞伸长,而且明显低于之前在体内由于流动或体外由于空间生长限制微模式所看到的程度,但与TMP的早期研究一致。两种细胞类型在KLF-2或其调节的下游粘附分子的表达中均未显示出明显的微模式驱动变化。这些结果表明,TMP流独立影响ECFC形态,但单独的对齐不足以驱动EC和ECFC功能的保护性变化。
{"title":"The Effects of Topographic Micropatterning on Endothelial Colony-Forming Cells.","authors":"Matthew W Hagen,&nbsp;Monica T Hinds","doi":"10.1089/ten.TEA.2020.0066","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0066","url":null,"abstract":"<p><p>Artificial small-diameter vascular grafts remain an unmet need in modern medicine, due to the thrombosis and neointimal hyperplasia that plague currently available synthetic devices. Tissue engineering techniques, including <i>in vitro</i> endothelialization, could offer a solution to this problem. A potential minimally invasive source of patient autologous endothelium is endothelial colony-forming cells (ECFCs), endothelial-like outgrowth products of circulating progenitors. While ECFCs respond to shear stress similar to mature endothelial cells (ECs), their response to luminal topographic micropatterning (TMP), a biomaterial modification with the potential to flow-independently, enhance the attachment, migration, gene expression, and function of mature ECs, remains unstudied. In this study, case-matched carotid endothelial cells (CaECs) and blood-derived ECFCs are statically cultured on polyurethane substrates with micropatterned pitches (pitch = peak to peak distance) ranging from 3-to 14 μm. On all pattern pitches tested, both CaECs and ECFCs showed significant and robust alignment to the angle of the micropatterns. Using a novel cell-by-cell image analysis technique, it was found that actin fibers similarly and significantly aligned to the angle of micropatterned features on all pitches tested. Microtubules analyzed through the same novel approach showed significant alignment on most pitches examined, with a greater variation in fiber angle overall. Interestingly, only CaECs showed significant cellular elongation, and notably to a lower degree than previously seen either <i>in vivo</i> due to flow or <i>in vitro</i> due to spatial growth restriction micropatterning, but consistent with earlier studies of TMP. Neither cell type displayed any significant micropattern-driven changes in the expression of KLF-2 or the downstream adhesion molecules it regulates. These results demonstrate that TMP flow-independently affects ECFC morphology, but that alignment alone is insufficient to drive protective changes in EC and ECFC function.</p>","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"270-281"},"PeriodicalIF":4.1,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0066","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"38103630","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Construction and Evaluation of Osteochondral-Like Tissue Using Chondrocyte Sheet and Cancellous Bone. 利用软骨细胞片和松质骨构建骨软骨样组织及评价。
IF 4.1 Pub Date : 2021-02-01 Epub Date: 2020-09-18 DOI: 10.1089/ten.TEA.2020.0107
Sopita Wongin, Rapeepat Narkbunnam, Saranatra Waikakul, Pojchong Chotiyarnwong, Thanyawan Aresanasuwan, Sittiruk Roytrakul, Kwanchanok Viravaidya-Pasuwat

The manipulation of human chondrocyte sheets in target areas frequently results in their tearing because they are thin and fragile. In this study, human cancellous bones were used as a supporting material to create chondrocyte sheet-cancellous bone tissues, and their properties were evaluated. Using cell sheet technology, human chondrocytes were constructed into triple-layered chondrocyte sheets that displayed chondrogenic properties. After transferring the chondrocyte sheets onto cancellous bones, the top area of the chondrocyte sheet-cancellous bone tissues exhibited a smooth surface topography without cell sheet floating within 7 days of culture. The immunofluorescence staining of collagen type II (COL2A1) and fibronectin (FN1) was also performed and examined. Using the shotgun proteomic analysis, the proteins associated with cell adhesion, extracellular matrix (ECM) organization, cell-substrate junction assembly, and cell adhesion mediated by integrin were observed in the chondrocyte sheets, cancellous bones, and chondrocyte sheet-cancellous bone tissues. Three integrin members, including integrin β4 (ITGB4), ITGB6, and ITGB8, were found in the chondrocyte sheets. Only ITGB8 was found in the chondrocyte sheets and chondrocyte sheet-cancellous bone tissues. During 48 h, the mean velocity of the individual cell migration was low, which did not affect the structure and chondrogenic properties of the chondrocyte sheets. Staining of the filamentous actin (F-actin) cytoskeleton in the migratory cells also provided a better understanding of the dynamic communication between the cell cytoskeleton and adhesion molecules through ITGB8, which may play a key role in the attachment of the chondrocyte sheets and the synthesis of the cartilage ECM. Therefore, we suggest that cancellous bone could be used as a supporting material to construct chondrocyte sheet-cancellous bone tissues for potential treatment of osteochondral lesions. Impact Statement We proposed a method to construct an osteochondral-like tissue by placing human chondrocyte sheets onto cancellous bone. The stationary chondrocyte sheets and the low mean velocity of the individual cell migration on the cancellous bone with the expression of COL2A1 indicated that the cancellous bone served as an appropriate supporting material. Moreover, the cellular mechanism for the adhesion of the chondrocyte sheets on the cancellous bone based on ITGB8-mediated adhesion through the rearrangement of filamentous actin provided a better understanding to improve the construction of osteochondral-like tissues, and to predict the repair mechanism in osteoarthritis therapy.

人体软骨细胞片在靶区的操作经常导致撕裂,因为它们是薄而脆弱的。本研究以人松质骨为支撑材料,制备软骨细胞片状松质骨组织,并对其性能进行评价。利用细胞片技术,将人软骨细胞构建成三层软骨细胞片,显示出软骨形成的特性。将软骨细胞片移植到松质骨上后,培养7天后,软骨细胞片-松质骨组织的顶部区域呈现光滑的表面形貌,无细胞片漂浮。同时进行II型胶原蛋白(COL2A1)和纤维连接蛋白(FN1)的免疫荧光染色。使用散弹枪蛋白质组学分析,在软骨细胞片、松质骨和软骨细胞片-松质骨组织中观察到与细胞粘附、细胞外基质(ECM)组织、细胞-底物连接组装和整合素介导的细胞粘附相关的蛋白质。在软骨细胞薄片中发现了三个整合素成员,包括整合素β4 (ITGB4)、ITGB6和ITGB8。仅在软骨细胞片和软骨细胞片-松质骨组织中发现ITGB8。在48 h内,单个细胞的平均迁移速度较低,但不影响软骨细胞片的结构和成软骨特性。对迁移细胞中丝状肌动蛋白(F-actin)细胞骨架的染色也可以更好地了解细胞骨架通过ITGB8与粘附分子之间的动态通信,这可能在软骨细胞片的附着和软骨ECM的合成中起关键作用。因此,我们建议将松质骨作为支撑材料构建软骨细胞片松质骨组织,用于骨软骨病变的潜在治疗。我们提出了一种将人软骨细胞片置于松质骨上构建骨软骨样组织的方法。在COL2A1表达的松质骨上,固定的软骨细胞片和单个细胞迁移的低平均速度表明,松质骨是一种合适的支撑材料。此外,基于itgb8介导的丝状肌动蛋白重排介导的软骨细胞片在松质骨上的粘附的细胞机制为改善骨软骨样组织的构建和预测骨关节炎治疗中的修复机制提供了更好的理解。
{"title":"Construction and Evaluation of Osteochondral-Like Tissue Using Chondrocyte Sheet and Cancellous Bone.","authors":"Sopita Wongin,&nbsp;Rapeepat Narkbunnam,&nbsp;Saranatra Waikakul,&nbsp;Pojchong Chotiyarnwong,&nbsp;Thanyawan Aresanasuwan,&nbsp;Sittiruk Roytrakul,&nbsp;Kwanchanok Viravaidya-Pasuwat","doi":"10.1089/ten.TEA.2020.0107","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0107","url":null,"abstract":"<p><p>The manipulation of human chondrocyte sheets in target areas frequently results in their tearing because they are thin and fragile. In this study, human cancellous bones were used as a supporting material to create chondrocyte sheet-cancellous bone tissues, and their properties were evaluated. Using cell sheet technology, human chondrocytes were constructed into triple-layered chondrocyte sheets that displayed chondrogenic properties. After transferring the chondrocyte sheets onto cancellous bones, the top area of the chondrocyte sheet-cancellous bone tissues exhibited a smooth surface topography without cell sheet floating within 7 days of culture. The immunofluorescence staining of collagen type II (COL2A1) and fibronectin (FN1) was also performed and examined. Using the shotgun proteomic analysis, the proteins associated with cell adhesion, extracellular matrix (ECM) organization, cell-substrate junction assembly, and cell adhesion mediated by integrin were observed in the chondrocyte sheets, cancellous bones, and chondrocyte sheet-cancellous bone tissues. Three integrin members, including integrin β4 (ITGB4), ITGB6, and ITGB8, were found in the chondrocyte sheets. Only ITGB8 was found in the chondrocyte sheets and chondrocyte sheet-cancellous bone tissues. During 48 h, the mean velocity of the individual cell migration was low, which did not affect the structure and chondrogenic properties of the chondrocyte sheets. Staining of the filamentous actin (F-actin) cytoskeleton in the migratory cells also provided a better understanding of the dynamic communication between the cell cytoskeleton and adhesion molecules through ITGB8, which may play a key role in the attachment of the chondrocyte sheets and the synthesis of the cartilage ECM. Therefore, we suggest that cancellous bone could be used as a supporting material to construct chondrocyte sheet-cancellous bone tissues for potential treatment of osteochondral lesions. Impact Statement We proposed a method to construct an osteochondral-like tissue by placing human chondrocyte sheets onto cancellous bone. The stationary chondrocyte sheets and the low mean velocity of the individual cell migration on the cancellous bone with the expression of COL2A1 indicated that the cancellous bone served as an appropriate supporting material. Moreover, the cellular mechanism for the adhesion of the chondrocyte sheets on the cancellous bone based on ITGB8-mediated adhesion through the rearrangement of filamentous actin provided a better understanding to improve the construction of osteochondral-like tissues, and to predict the repair mechanism in osteoarthritis therapy.</p>","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"282-295"},"PeriodicalIF":4.1,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0107","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"38206155","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 9
Influence of Geometry and Architecture on the In Vivo Success of 3D-Printed Scaffolds for Spinal Fusion. 几何和结构对3d打印脊柱融合支架体内成功的影响。
IF 4.1 Pub Date : 2021-01-01 Epub Date: 2020-03-26 DOI: 10.1089/ten.TEA.2020.0004
Mitchell Hallman, J Adam Driscoll, Ryan Lubbe, Soyeon Jeong, Kevin Chang, Meraaj Haleem, Adam Jakus, Richard Pahapill, Chawon Yun, Ramille Shah, Wellington K Hsu, Stuart R Stock, Erin L Hsu
<p><p>We previously developed a recombinant growth factor-free, three-dimensional (3D)-printed material comprising hydroxyapatite (HA) and demineralized bone matrix (DBM) for bone regeneration. This material has demonstrated the capacity to promote re-mineralization of the DBM particles within the scaffold struts and shows potential to promote successful spine fusion. Here, we investigate the role of geometry and architecture in osteointegration, vascularization, and facilitation of spine fusion in a preclinical model. Inks containing HA and DBM particles in a poly(lactide-co-glycolide) elastomer were 3D-printed into scaffolds with varying relative strut angles (90° vs. 45° advancing angle), macropore size (0 μm vs. 500 μm vs. 1000 μm), and strut alignment (aligned vs. offset). The following configurations were compared with scaffolds containing no macropores: 90°/500 μm/aligned, 45°/500 μm/aligned, 90°/1000 μm/aligned, 45°/1000 μm/aligned, 90°/1000 μm/offset, and 45°/1000 μm/offset. Eighty-four female Sprague-Dawley rats underwent spine fusion with bilateral placement of the various scaffold configurations (<i>n</i> = 12/configuration). Osteointegration and vascularization were assessed by using microComputed Tomography and histology, and spine fusion was assessed via blinded manual palpation. The 45°/1000 μm scaffolds with aligned struts achieved the highest average fusion score (1.61/2) as well as the highest osteointegration score. Both the 45°/1000 μm/aligned and 90°/1000 μm/aligned scaffolds elicited fusion rates of 100%, which was significantly greater than the 45°/500 μm/aligned iteration (<i>p</i> < 0.05). All porous scaffolds were fully vascularized, with blood vessels present in every macropore. Vessels were also observed extending from the native transverse process bone, through the protrusions of new bone, and into the macropores of the scaffolds. When viewed independently, scaffolds printed with relative strut angles of 45° and 90° each allowed for osteointegration sufficient to stabilize the spine at L4-L5. Within those parameters, a pore size of 500 μm or greater was generally sufficient to achieve unilateral fusion. However, our results suggest that scaffolds printed with the larger pore size and with aligned struts at an advancing angle of 45° may represent the optimal configuration to maximize osteointegration and fusion capacity. Overall, this work suggests that the HA/DBM composite scaffolds provide a conducive environment for bone regeneration as well as vascular infiltration. This technology, therefore, represents a novel, growth-factor-free biomaterial with significant potential as a bone graft substitute for use in spinal surgery. Impact statement We previously developed a recombinant growth factor-free, three-dimensional (3D)-printed composite material comprising hydroxyapatite and demineralized bone matrix for bone regeneration. Here, we identify a range of 3D geometric and architectural parameters that support the prec
我们之前开发了一种重组无生长因子,三维(3D)打印材料,包括羟基磷灰石(HA)和脱矿骨基质(DBM)用于骨再生。该材料已证明能够促进支架支柱内DBM颗粒的再矿化,并显示出促进脊柱融合成功的潜力。在这里,我们在临床前模型中研究几何和建筑在骨整合、血管形成和脊柱融合促进中的作用。在聚(丙交酯-共聚物)弹性体中含有HA和DBM颗粒的油墨被3d打印到支架中,支架具有不同的相对支撑角度(90°vs 45°推进角)、大孔尺寸(0 μm vs 500 μm vs 1000 μm)和支撑对齐(对齐vs偏移)。与不含大孔的支架进行对比:90°/500 μm/对齐、45°/500 μm/对齐、90°/1000 μm/对齐、45°/1000 μm/对齐、90°/1000 μm/偏移和45°/1000 μm/偏移。84只雌性Sprague-Dawley大鼠接受脊柱融合术,双侧放置各种支架构型(n = 12/构型)。骨整合和血管形成通过显微计算机断层扫描和组织学评估,脊柱融合通过盲法手工触诊评估。45°/1000 μm支架的平均融合评分最高(1.61/2),骨整合评分最高。45°/1000 μm/排列支架和90°/1000 μm/排列支架的融合率均为100%,显著高于45°/500 μm/排列支架
{"title":"Influence of Geometry and Architecture on the <i>In Vivo</i> Success of 3D-Printed Scaffolds for Spinal Fusion.","authors":"Mitchell Hallman,&nbsp;J Adam Driscoll,&nbsp;Ryan Lubbe,&nbsp;Soyeon Jeong,&nbsp;Kevin Chang,&nbsp;Meraaj Haleem,&nbsp;Adam Jakus,&nbsp;Richard Pahapill,&nbsp;Chawon Yun,&nbsp;Ramille Shah,&nbsp;Wellington K Hsu,&nbsp;Stuart R Stock,&nbsp;Erin L Hsu","doi":"10.1089/ten.TEA.2020.0004","DOIUrl":"https://doi.org/10.1089/ten.TEA.2020.0004","url":null,"abstract":"&lt;p&gt;&lt;p&gt;We previously developed a recombinant growth factor-free, three-dimensional (3D)-printed material comprising hydroxyapatite (HA) and demineralized bone matrix (DBM) for bone regeneration. This material has demonstrated the capacity to promote re-mineralization of the DBM particles within the scaffold struts and shows potential to promote successful spine fusion. Here, we investigate the role of geometry and architecture in osteointegration, vascularization, and facilitation of spine fusion in a preclinical model. Inks containing HA and DBM particles in a poly(lactide-co-glycolide) elastomer were 3D-printed into scaffolds with varying relative strut angles (90° vs. 45° advancing angle), macropore size (0 μm vs. 500 μm vs. 1000 μm), and strut alignment (aligned vs. offset). The following configurations were compared with scaffolds containing no macropores: 90°/500 μm/aligned, 45°/500 μm/aligned, 90°/1000 μm/aligned, 45°/1000 μm/aligned, 90°/1000 μm/offset, and 45°/1000 μm/offset. Eighty-four female Sprague-Dawley rats underwent spine fusion with bilateral placement of the various scaffold configurations (&lt;i&gt;n&lt;/i&gt; = 12/configuration). Osteointegration and vascularization were assessed by using microComputed Tomography and histology, and spine fusion was assessed via blinded manual palpation. The 45°/1000 μm scaffolds with aligned struts achieved the highest average fusion score (1.61/2) as well as the highest osteointegration score. Both the 45°/1000 μm/aligned and 90°/1000 μm/aligned scaffolds elicited fusion rates of 100%, which was significantly greater than the 45°/500 μm/aligned iteration (&lt;i&gt;p&lt;/i&gt; &lt; 0.05). All porous scaffolds were fully vascularized, with blood vessels present in every macropore. Vessels were also observed extending from the native transverse process bone, through the protrusions of new bone, and into the macropores of the scaffolds. When viewed independently, scaffolds printed with relative strut angles of 45° and 90° each allowed for osteointegration sufficient to stabilize the spine at L4-L5. Within those parameters, a pore size of 500 μm or greater was generally sufficient to achieve unilateral fusion. However, our results suggest that scaffolds printed with the larger pore size and with aligned struts at an advancing angle of 45° may represent the optimal configuration to maximize osteointegration and fusion capacity. Overall, this work suggests that the HA/DBM composite scaffolds provide a conducive environment for bone regeneration as well as vascular infiltration. This technology, therefore, represents a novel, growth-factor-free biomaterial with significant potential as a bone graft substitute for use in spinal surgery. Impact statement We previously developed a recombinant growth factor-free, three-dimensional (3D)-printed composite material comprising hydroxyapatite and demineralized bone matrix for bone regeneration. Here, we identify a range of 3D geometric and architectural parameters that support the prec","PeriodicalId":23133,"journal":{"name":"Tissue Engineering Part A","volume":" ","pages":"26-36"},"PeriodicalIF":4.1,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/ten.TEA.2020.0004","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"37678114","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 17
期刊
Tissue Engineering Part A
全部 Acc. Chem. Res. ACS Applied Bio Materials ACS Appl. Electron. Mater. ACS Appl. Energy Mater. ACS Appl. Mater. Interfaces ACS Appl. Nano Mater. ACS Appl. Polym. Mater. ACS BIOMATER-SCI ENG ACS Catal. ACS Cent. Sci. ACS Chem. Biol. ACS Chemical Health & Safety ACS Chem. Neurosci. ACS Comb. Sci. ACS Earth Space Chem. ACS Energy Lett. ACS Infect. Dis. ACS Macro Lett. ACS Mater. Lett. ACS Med. Chem. Lett. ACS Nano ACS Omega ACS Photonics ACS Sens. ACS Sustainable Chem. Eng. ACS Synth. Biol. Anal. Chem. BIOCHEMISTRY-US Bioconjugate Chem. BIOMACROMOLECULES Chem. Res. Toxicol. Chem. Rev. Chem. Mater. CRYST GROWTH DES ENERG FUEL Environ. Sci. Technol. Environ. Sci. Technol. Lett. Eur. J. Inorg. Chem. IND ENG CHEM RES Inorg. Chem. J. Agric. Food. Chem. J. Chem. Eng. Data J. Chem. Educ. J. Chem. Inf. Model. J. Chem. Theory Comput. J. Med. Chem. J. Nat. Prod. J PROTEOME RES J. Am. Chem. Soc. LANGMUIR MACROMOLECULES Mol. Pharmaceutics Nano Lett. Org. Lett. ORG PROCESS RES DEV ORGANOMETALLICS J. Org. Chem. J. Phys. Chem. J. Phys. Chem. A J. Phys. Chem. B J. Phys. Chem. C J. Phys. Chem. Lett. Analyst Anal. Methods Biomater. Sci. Catal. Sci. Technol. Chem. Commun. Chem. Soc. Rev. CHEM EDUC RES PRACT CRYSTENGCOMM Dalton Trans. Energy Environ. Sci. ENVIRON SCI-NANO ENVIRON SCI-PROC IMP ENVIRON SCI-WAT RES Faraday Discuss. Food Funct. Green Chem. Inorg. Chem. Front. Integr. Biol. J. Anal. At. Spectrom. J. Mater. Chem. A J. Mater. Chem. B J. Mater. Chem. C Lab Chip Mater. Chem. Front. Mater. Horiz. MEDCHEMCOMM Metallomics Mol. Biosyst. Mol. Syst. Des. Eng. Nanoscale Nanoscale Horiz. Nat. Prod. Rep. New J. Chem. Org. Biomol. Chem. Org. Chem. Front. PHOTOCH PHOTOBIO SCI PCCP Polym. Chem.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1