Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5638877
E. M. Lourenço, Tarcisio Loddi, O. L. Tortelli
This paper proposes a unified load flow analysis for transmission and distribution systems, based on the fast decoupled power flow method (FDPF). The method is centered on an extension of the conventional per unit normalization to circumvent the problems caused by low X/R ratio faced by distribution systems. The proposed extension establishes a complex voltampere basis. A properly definition of the base angle can adequate the X/R ratio of distribution systems as for instance the axis rotation previously presented in the technical literature. This paper also proposes a simple procedure that allows the utilization of different base angles for different parts of an interconnected system, so that conventional FDPF can be used to determine power flow solution of interconnected T&D systems in off line studies. Simulation results are conducted through IEEE standard test feeders, a south Brazilian distribution system and an interconnected T&D test system. Several operation conditions, including specific situations, such as closed ring operation of distribution systems, were simulated to evaluate the proposed approach.
{"title":"Unified load flow analysis for emerging distribution systems","authors":"E. M. Lourenço, Tarcisio Loddi, O. L. Tortelli","doi":"10.1109/ISGTEUROPE.2010.5638877","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5638877","url":null,"abstract":"This paper proposes a unified load flow analysis for transmission and distribution systems, based on the fast decoupled power flow method (FDPF). The method is centered on an extension of the conventional per unit normalization to circumvent the problems caused by low X/R ratio faced by distribution systems. The proposed extension establishes a complex voltampere basis. A properly definition of the base angle can adequate the X/R ratio of distribution systems as for instance the axis rotation previously presented in the technical literature. This paper also proposes a simple procedure that allows the utilization of different base angles for different parts of an interconnected system, so that conventional FDPF can be used to determine power flow solution of interconnected T&D systems in off line studies. Simulation results are conducted through IEEE standard test feeders, a south Brazilian distribution system and an interconnected T&D test system. Several operation conditions, including specific situations, such as closed ring operation of distribution systems, were simulated to evaluate the proposed approach.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122274064","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5638962
G. Valverde, V. Terzija
The paper proposes a novel multi-area state estimator based on wide area measurements where only boundary buses are considered in the coordination level. The power injection measurements are not used during the coordination level reducing the number of states and therefore size of the problem. Instead, a set of pseudo-measurements are included whenever a power injection measurement is available in boundary buses. The proposed method was validated using the IEEE 300 bus system split into 7 different areas.
{"title":"PMU-based multi-area state estimation with low data exchange","authors":"G. Valverde, V. Terzija","doi":"10.1109/ISGTEUROPE.2010.5638962","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5638962","url":null,"abstract":"The paper proposes a novel multi-area state estimator based on wide area measurements where only boundary buses are considered in the coordination level. The power injection measurements are not used during the coordination level reducing the number of states and therefore size of the problem. Instead, a set of pseudo-measurements are included whenever a power injection measurement is available in boundary buses. The proposed method was validated using the IEEE 300 bus system split into 7 different areas.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131997124","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5638996
Manuel Roman-Barri, I. Cairó, A. Sumper, A. Sudriá-Andreu
This paper deals with the implementation of a operating microgrid based on current real and emulated energy resources which permits the experimentation of various scenarios. This microgrid is able to adapt to different sorts of energy sources, loads and storage devices, and to critical situations that, with testing and emulation, can improve performances. The microgrid is implemented with real time data acquisition systems, communications (such as IEC 61850), and intelligent electronics peripheral equipment. Block diagrams, showing implementation using power electronics along with corresponding results, are shown for better understanding. Implementation and experimentation with the microgrid under investigation will improve future research on microgrid and smartgrid projects.
{"title":"Experience on the implementation of a microgrid project in Barcelona","authors":"Manuel Roman-Barri, I. Cairó, A. Sumper, A. Sudriá-Andreu","doi":"10.1109/ISGTEUROPE.2010.5638996","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5638996","url":null,"abstract":"This paper deals with the implementation of a operating microgrid based on current real and emulated energy resources which permits the experimentation of various scenarios. This microgrid is able to adapt to different sorts of energy sources, loads and storage devices, and to critical situations that, with testing and emulation, can improve performances. The microgrid is implemented with real time data acquisition systems, communications (such as IEC 61850), and intelligent electronics peripheral equipment. Block diagrams, showing implementation using power electronics along with corresponding results, are shown for better understanding. Implementation and experimentation with the microgrid under investigation will improve future research on microgrid and smartgrid projects.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127068901","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5638988
O. Samuelsson, S. Repo, R. Jessler, J. Aho, Matti Kärenlampi, A. Malmquist
Since Distributed Generation (DG) often involves renewable energy, it is important to facilitate integration of DG into existing networks. This is the aim of the EU FP6 demonstration project ADINE. It is based on the Active Network Management (ANM) concept, where automation, ICT and power electronics are used to integrate more DG by exploiting active resources instead of just reinforcing the network. The resources are mobilized through ancillary services or requirements. Five enabling solutions within ANM are pushed forward in the project: Protection relay and fault location applications, coordinated protection planning, voltage control with microturbine, centralized voltage control with SCADA/DMS and a new STATCOM. All these are demonstrated in real-life. Finally the performance of each technical solution during conditions with large amounts of DG are analyzed using a real-time simulation environment with RTDS/dSPACE. Introducing appropriate parts of the ANM concept will permit connection of more DG in distribution networks.
{"title":"Active distribution network — Demonstration project ADINE","authors":"O. Samuelsson, S. Repo, R. Jessler, J. Aho, Matti Kärenlampi, A. Malmquist","doi":"10.1109/ISGTEUROPE.2010.5638988","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5638988","url":null,"abstract":"Since Distributed Generation (DG) often involves renewable energy, it is important to facilitate integration of DG into existing networks. This is the aim of the EU FP6 demonstration project ADINE. It is based on the Active Network Management (ANM) concept, where automation, ICT and power electronics are used to integrate more DG by exploiting active resources instead of just reinforcing the network. The resources are mobilized through ancillary services or requirements. Five enabling solutions within ANM are pushed forward in the project: Protection relay and fault location applications, coordinated protection planning, voltage control with microturbine, centralized voltage control with SCADA/DMS and a new STATCOM. All these are demonstrated in real-life. Finally the performance of each technical solution during conditions with large amounts of DG are analyzed using a real-time simulation environment with RTDS/dSPACE. Introducing appropriate parts of the ANM concept will permit connection of more DG in distribution networks.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114600093","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5638909
A. Ukil, B. Deck, V. H. Shah
Overcurrent relays are widely used for power systems protection. Transmission side uses more directional type relays, while distribution systems, e.g., radial and ring-main subtransmission systems use non-directional types. The fault direction may be forward (between relay and grid), or reverse (between relay and source), the normal power flow being from source to the grid. Traditional directional overcurrent relays utilize the reference voltage phasor for estimating the direction of the fault. This requires measurement of both current and voltage using respective sensors. This makes the directional overcurrent relays more costly than the non-directional type. In this paper, a novel current-only directional detection possibility is highlighted along with theoretical and test signal analysis. Possible utilization of the current-only directional relay for intelligent directional protection in the distribution systems are described. Directional protection for distribution systems is a key focus area for enabling the smart grid.
{"title":"Smart distribution protection using current-only directional overcurrent relay","authors":"A. Ukil, B. Deck, V. H. Shah","doi":"10.1109/ISGTEUROPE.2010.5638909","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5638909","url":null,"abstract":"Overcurrent relays are widely used for power systems protection. Transmission side uses more directional type relays, while distribution systems, e.g., radial and ring-main subtransmission systems use non-directional types. The fault direction may be forward (between relay and grid), or reverse (between relay and source), the normal power flow being from source to the grid. Traditional directional overcurrent relays utilize the reference voltage phasor for estimating the direction of the fault. This requires measurement of both current and voltage using respective sensors. This makes the directional overcurrent relays more costly than the non-directional type. In this paper, a novel current-only directional detection possibility is highlighted along with theoretical and test signal analysis. Possible utilization of the current-only directional relay for intelligent directional protection in the distribution systems are described. Directional protection for distribution systems is a key focus area for enabling the smart grid.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114529355","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5638934
N. Voropai, A. Glazunova, V. Kurbatsky, D. N. Sidorov, V. Spiryaev, N. Tomin
Two approaches are proposed for short-term forecast of the parameters of expected operating conditions. The Kalman filter based algorithms and the modern technologies of an artificial intelligence and nonlinear optimization algorithms are employed for dynamical state estimation. The new approach combining the artificial neural networks and the Hilbert-Huang transform is designed in order to increase the accuracy of operating conditions forecasting. Numerical experiments on real time series have demonstrated the improvement of the prediction.
{"title":"Operating conditions forecasting for monitoring and control of electric power systems","authors":"N. Voropai, A. Glazunova, V. Kurbatsky, D. N. Sidorov, V. Spiryaev, N. Tomin","doi":"10.1109/ISGTEUROPE.2010.5638934","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5638934","url":null,"abstract":"Two approaches are proposed for short-term forecast of the parameters of expected operating conditions. The Kalman filter based algorithms and the modern technologies of an artificial intelligence and nonlinear optimization algorithms are employed for dynamical state estimation. The new approach combining the artificial neural networks and the Hilbert-Huang transform is designed in order to increase the accuracy of operating conditions forecasting. Numerical experiments on real time series have demonstrated the improvement of the prediction.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114553050","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5638863
F. Bliek, Albert van de Noort, B. Roossien, R. Kamphuis, J. D. Wit, Jörgen van der Velde, M. Eijgelaar
PowerMatching City is a living lab Smart Grid demonstration in the Netherlands consisting of 25 interconnected households (phase-I). It focuses on the development of a market model for intelligent network operation under normal market conditions that allows simultaneous in-home optimization (pro-sumer), technical coordination (distribution system operator) and commercial coordination (balance responsible). The coordination mechanism, provided by the agent based PowerMatcher technology, is extended to allow these simultaneous optimizations. Mature smart grids require a transparent coordination mechanism which allows various energy sources and appliances to be interconnected on a non-segregated and plug-in basis. It should seamlessly combine distributed generation with demand response. A generic design has been developed that allows seamless coordination of hybrid heat pumps, µ-CHPs, electric cars, smart appliances such as freezers, washing machines etc. in a single ICT solution. End-user acceptance is guaranteed by advanced comfort control mechanisms and monitored in a participating design program.
{"title":"PowerMatching City, a living lab smart grid demonstration","authors":"F. Bliek, Albert van de Noort, B. Roossien, R. Kamphuis, J. D. Wit, Jörgen van der Velde, M. Eijgelaar","doi":"10.1109/ISGTEUROPE.2010.5638863","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5638863","url":null,"abstract":"PowerMatching City is a living lab Smart Grid demonstration in the Netherlands consisting of 25 interconnected households (phase-I). It focuses on the development of a market model for intelligent network operation under normal market conditions that allows simultaneous in-home optimization (pro-sumer), technical coordination (distribution system operator) and commercial coordination (balance responsible). The coordination mechanism, provided by the agent based PowerMatcher technology, is extended to allow these simultaneous optimizations. Mature smart grids require a transparent coordination mechanism which allows various energy sources and appliances to be interconnected on a non-segregated and plug-in basis. It should seamlessly combine distributed generation with demand response. A generic design has been developed that allows seamless coordination of hybrid heat pumps, µ-CHPs, electric cars, smart appliances such as freezers, washing machines etc. in a single ICT solution. End-user acceptance is guaranteed by advanced comfort control mechanisms and monitored in a participating design program.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123645598","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5638978
Z. Ghofrani-Jahromi, M. Ehsan, M. Masjed-Jamei
There are a lot of parameters which are decisive in distribution loss management, such as demand value, energy price, etc. In this paper the cause-and-effect relationships among some of these variables are clearly described. The study demonstrates how a variable in the model will change, if an alteration in one of the other variables occurs. The power system variables considered in this study include energy and loss prices, generation and demand values, distribution loss, distribution system age, number of customers connected to the smart grid, distribution network revenue, and so forth. The smart grid impacts can be studied from two different aspects: 1) the communication infrastructure available throughout the smart grid increases the speed at which different system parameters are changed due to a change in a specific parameter and 2) the end-users have more control over what happens to the whole distribution system. A graphical representation technique, called “Causal Loop Diagram”, is employed in order to illuminate the cause-and-effect relationships among variables. This kind of study helps us to acquire a comprehensive understanding of the whole distribution system from the loss perspective. The survey involves studying the effects both on the distribution management system and the end-users.
{"title":"Cause-and-effect relationships affecting distribution loss management","authors":"Z. Ghofrani-Jahromi, M. Ehsan, M. Masjed-Jamei","doi":"10.1109/ISGTEUROPE.2010.5638978","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5638978","url":null,"abstract":"There are a lot of parameters which are decisive in distribution loss management, such as demand value, energy price, etc. In this paper the cause-and-effect relationships among some of these variables are clearly described. The study demonstrates how a variable in the model will change, if an alteration in one of the other variables occurs. The power system variables considered in this study include energy and loss prices, generation and demand values, distribution loss, distribution system age, number of customers connected to the smart grid, distribution network revenue, and so forth. The smart grid impacts can be studied from two different aspects: 1) the communication infrastructure available throughout the smart grid increases the speed at which different system parameters are changed due to a change in a specific parameter and 2) the end-users have more control over what happens to the whole distribution system. A graphical representation technique, called “Causal Loop Diagram”, is employed in order to illuminate the cause-and-effect relationships among variables. This kind of study helps us to acquire a comprehensive understanding of the whole distribution system from the loss perspective. The survey involves studying the effects both on the distribution management system and the end-users.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123714105","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5639001
Daniel Germanus, I. Dionysiou, K. H. Gjermundrød, Abdelmajid Khelil, N. Suri, D. Bakken, C. Hauser
Data delivery in the power grid today is, for the most part, hard-coded, tedious to implement and change, and does not provide any real end-to-end guarantees. Applications have started to emerge that require real-time data delivery in order to provide a wide-area assessment of the health of the power grid. This paper presents two novel communication infrastructures that facilitate the delivery of power data to intended recipients, each based on a different communication paradigm. The necessity of forming and managing trusted partnerships in either framework is further discussed.
{"title":"Leveraging the next-generation power grid: Data sharing and associated partnerships","authors":"Daniel Germanus, I. Dionysiou, K. H. Gjermundrød, Abdelmajid Khelil, N. Suri, D. Bakken, C. Hauser","doi":"10.1109/ISGTEUROPE.2010.5639001","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5639001","url":null,"abstract":"Data delivery in the power grid today is, for the most part, hard-coded, tedious to implement and change, and does not provide any real end-to-end guarantees. Applications have started to emerge that require real-time data delivery in order to provide a wide-area assessment of the health of the power grid. This paper presents two novel communication infrastructures that facilitate the delivery of power data to intended recipients, each based on a different communication paradigm. The necessity of forming and managing trusted partnerships in either framework is further discussed.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124087912","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-11-18DOI: 10.1109/ISGTEUROPE.2010.5638931
D. Shi, J. Buse, Q. Wu, Lin Jiang
This paper presents a novel method for current transformer (CT) saturation detection and compensation. In the method, CT saturation characteristics are represented by a partial nonlinear regression model. The parameters of this model can be estimated rapidly and accurately using both unsaturated and saturated sections of the waveform of a secondary fault current, even in a heavy saturation scenario, where the fault waveform is severely distorted. To reduce the computational load of the estimation, separable nonlinear least squares (SNLLS) method is used to separates the linear and nonlinear parameters of the model, thus reducing the complexity of the estimation. With the fast and accurate parameter estimation, the method can be used for real-time protective relaying. The method has been evaluated on the data obtained from PSCAD/EMTDC simulation. The analysis of the test results shows that the proposed method has superior performance than that offered by conventional compensation algorithms.
{"title":"Fast compensation of current transformer saturation","authors":"D. Shi, J. Buse, Q. Wu, Lin Jiang","doi":"10.1109/ISGTEUROPE.2010.5638931","DOIUrl":"https://doi.org/10.1109/ISGTEUROPE.2010.5638931","url":null,"abstract":"This paper presents a novel method for current transformer (CT) saturation detection and compensation. In the method, CT saturation characteristics are represented by a partial nonlinear regression model. The parameters of this model can be estimated rapidly and accurately using both unsaturated and saturated sections of the waveform of a secondary fault current, even in a heavy saturation scenario, where the fault waveform is severely distorted. To reduce the computational load of the estimation, separable nonlinear least squares (SNLLS) method is used to separates the linear and nonlinear parameters of the model, thus reducing the complexity of the estimation. With the fast and accurate parameter estimation, the method can be used for real-time protective relaying. The method has been evaluated on the data obtained from PSCAD/EMTDC simulation. The analysis of the test results shows that the proposed method has superior performance than that offered by conventional compensation algorithms.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124122681","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}