Alberts Auzins, I. Leimane, M. Bleidere, V. Šterna, A. Krievina
Abstract The objective of the study was to define the main opportunities and challenges for the commercialization of the new hulless barley variety ‘Kornelija’ arising from its biochemical and farming profile, and to present the evaluation for the approach to a new high protein-based payment system. Unlike the agricultural profile with both advantages and disadvantages, the variety shows distinctive grain quality and biochemical properties. Although there is a growing demand for high-nutrition and plant-based protein foods, farmers are focused on yield potential, not the nutritional value of cereals. By paying for the grains of ‘Kornelija’ the price that is equal or higher than winter wheat referenced break-even price, food processors would both motivate farmers to grow the variety and obtain grains with much higher protein content, and significantly higher β-glucans content than winter wheat to produce functional foods for a price that is close to the price of winter wheat.
{"title":"Opportunities for Commercialization of High-Protein Barley: Case of New Variety ‘Kornelija’","authors":"Alberts Auzins, I. Leimane, M. Bleidere, V. Šterna, A. Krievina","doi":"10.2478/plua-2021-0019","DOIUrl":"https://doi.org/10.2478/plua-2021-0019","url":null,"abstract":"Abstract The objective of the study was to define the main opportunities and challenges for the commercialization of the new hulless barley variety ‘Kornelija’ arising from its biochemical and farming profile, and to present the evaluation for the approach to a new high protein-based payment system. Unlike the agricultural profile with both advantages and disadvantages, the variety shows distinctive grain quality and biochemical properties. Although there is a growing demand for high-nutrition and plant-based protein foods, farmers are focused on yield potential, not the nutritional value of cereals. By paying for the grains of ‘Kornelija’ the price that is equal or higher than winter wheat referenced break-even price, food processors would both motivate farmers to grow the variety and obtain grains with much higher protein content, and significantly higher β-glucans content than winter wheat to produce functional foods for a price that is close to the price of winter wheat.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"46 1","pages":"75 - 89"},"PeriodicalIF":0.0,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42169225","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract A relevant and practical research object is analysed in the article – the implementation resolution of green transportation and the benefits of using such means. In this article, object is analysed from the interdisciplinary position, i.e. from the perspective of transportation, one of the logistical subsystems, and sustainable environment. The transportation department is undoubtedly an important guarantor of economic and industrial development. Despite the worldwide importance of transportation in everyday activities, the transportation also poses the risk for human health and life quality, for it is one of the biggest consumer of oil products and significantly contributes towards air pollution. Despite many theoretical and empirical researches, Šiauliai region still lacks an approach towards the implementation possibilities and studies revealing the benefits of green transportation. A comparative analysis has been performed by using the survey data, collected from 402 workers, responsible for transportation, working for Šiauliai regional companies. According to the results of the research for implementation situations of green transport in Šiauliai regional companies, the representatives of regional companies understand the importance of green transport, and more and more companies aim to reduce the environmental risk and to become more competitive. Integrated transportation by combining several means of transport, cargo consolidation by combining small orders and big orders, and ecological driving are the green transportation measures implemented most in regional companies. The typical benefits of green transport are increased environmental friendliness and improved relationship with consumers.
{"title":"Green Transportation in the Šiauliai Regional Companies","authors":"Ineta Beniušienė, Aida Jankauskienė","doi":"10.2478/plua-2021-0015","DOIUrl":"https://doi.org/10.2478/plua-2021-0015","url":null,"abstract":"Abstract A relevant and practical research object is analysed in the article – the implementation resolution of green transportation and the benefits of using such means. In this article, object is analysed from the interdisciplinary position, i.e. from the perspective of transportation, one of the logistical subsystems, and sustainable environment. The transportation department is undoubtedly an important guarantor of economic and industrial development. Despite the worldwide importance of transportation in everyday activities, the transportation also poses the risk for human health and life quality, for it is one of the biggest consumer of oil products and significantly contributes towards air pollution. Despite many theoretical and empirical researches, Šiauliai region still lacks an approach towards the implementation possibilities and studies revealing the benefits of green transportation. A comparative analysis has been performed by using the survey data, collected from 402 workers, responsible for transportation, working for Šiauliai regional companies. According to the results of the research for implementation situations of green transport in Šiauliai regional companies, the representatives of regional companies understand the importance of green transport, and more and more companies aim to reduce the environmental risk and to become more competitive. Integrated transportation by combining several means of transport, cargo consolidation by combining small orders and big orders, and ecological driving are the green transportation measures implemented most in regional companies. The typical benefits of green transport are increased environmental friendliness and improved relationship with consumers.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"46 1","pages":"31 - 38"},"PeriodicalIF":0.0,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41786860","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jelena Nikolajenko-Skarbalė, Rasa Viederytė, Agnė Šneiderienė
Abstract Climate change and environmental deterioration have been recognized as global drivers of change, and the shift to the “greener” economy is the key to sustainable development. The green economy is a priority field for developing and developed economies. However, as the authors of the publication have realised, there is no consensus about the meaning of the green economy and “green” jobs, that is why an uncertainty as in measurement of economic trends and an impact of it, as well as in what skills and competencies should be assigned to the “green” ones, arises. The new “green” processes and technologies are arising in a progressive trend, that is why it is important to ensure there are properly skilled candidates with appropriate “green” skills and competencies on the labour market, as well as to prepare fresh graduates with the “green” skills that will meet requirement of both, the recent and the future companies, especially operating in the “green” sector. In the framework of “SB Bridge” project an online survey was conducted by interviewing the “green” companies to identify which skills and competencies are needed for “green” jobs recently, and whether candidates and fresh graduates are enough with the “green” skills and competencies for fruitful engagement to “green” jobs. As the survey identified, fresh graduates and candidates for “green” jobs lack technical and (or) mechanical knowledge, IT skills, as well as experience and ability to work independently and in the team to resolve arising problems.
{"title":"The Significance of “Green” Skills and Competencies Making the Transition Towards the “Greener” Economy","authors":"Jelena Nikolajenko-Skarbalė, Rasa Viederytė, Agnė Šneiderienė","doi":"10.2478/plua-2021-0017","DOIUrl":"https://doi.org/10.2478/plua-2021-0017","url":null,"abstract":"Abstract Climate change and environmental deterioration have been recognized as global drivers of change, and the shift to the “greener” economy is the key to sustainable development. The green economy is a priority field for developing and developed economies. However, as the authors of the publication have realised, there is no consensus about the meaning of the green economy and “green” jobs, that is why an uncertainty as in measurement of economic trends and an impact of it, as well as in what skills and competencies should be assigned to the “green” ones, arises. The new “green” processes and technologies are arising in a progressive trend, that is why it is important to ensure there are properly skilled candidates with appropriate “green” skills and competencies on the labour market, as well as to prepare fresh graduates with the “green” skills that will meet requirement of both, the recent and the future companies, especially operating in the “green” sector. In the framework of “SB Bridge” project an online survey was conducted by interviewing the “green” companies to identify which skills and competencies are needed for “green” jobs recently, and whether candidates and fresh graduates are enough with the “green” skills and competencies for fruitful engagement to “green” jobs. As the survey identified, fresh graduates and candidates for “green” jobs lack technical and (or) mechanical knowledge, IT skills, as well as experience and ability to work independently and in the team to resolve arising problems.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"46 1","pages":"53 - 65"},"PeriodicalIF":0.0,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46482490","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Social enterprises have positive effect on sustainable development, and they have become an important instrument for solving social problems (especially in rural areas), as the national and local governments alone cannot solve all such problems. To foster the development of social entrepreneurship, Latvia has introduced several support instruments for social enterprises, which include tax relief, privileged procurement contracts, grants, as well as non-monetary kinds of support. However, social entrepreneurs often point out that support from the national and local governments is insufficient, while the support instruments stipulated in the Social Enterprise Law are not widely used. Therefore, the aim of the research is to analyse national and local government support instruments for social enterprises in Latvia. The research found that the most important financial instrument fostering the development of social entrepreneurship in Latvia is a grant scheme administered by the Ministry of Welfare and the JSC Development Finance Institution Altum, which is available in the range of EUR 5000 to 200000 for investment and working capital. In the period 2017-2020, 94 social entrepreneurship projects with a total budget of EUR 6 million were supported, which could be viewed as significant financial support. In contrast, immovable property tax relief, exemption from enterprise income tax (on profits) and relief from this tax for several categories of non-business expenses are considered by social entrepreneurs to be an insignificant kind of support. There is also lack of experience and practice regarding the inclusion of social criteria in public procurement in Latvia.
{"title":"Analysis of Financial Support Instruments for Social Enterprises in Latvia","authors":"Lasma Licite-Kurbe, Dana Gintere","doi":"10.2478/plua-2021-0009","DOIUrl":"https://doi.org/10.2478/plua-2021-0009","url":null,"abstract":"Abstract Social enterprises have positive effect on sustainable development, and they have become an important instrument for solving social problems (especially in rural areas), as the national and local governments alone cannot solve all such problems. To foster the development of social entrepreneurship, Latvia has introduced several support instruments for social enterprises, which include tax relief, privileged procurement contracts, grants, as well as non-monetary kinds of support. However, social entrepreneurs often point out that support from the national and local governments is insufficient, while the support instruments stipulated in the Social Enterprise Law are not widely used. Therefore, the aim of the research is to analyse national and local government support instruments for social enterprises in Latvia. The research found that the most important financial instrument fostering the development of social entrepreneurship in Latvia is a grant scheme administered by the Ministry of Welfare and the JSC Development Finance Institution Altum, which is available in the range of EUR 5000 to 200000 for investment and working capital. In the period 2017-2020, 94 social entrepreneurship projects with a total budget of EUR 6 million were supported, which could be viewed as significant financial support. In contrast, immovable property tax relief, exemption from enterprise income tax (on profits) and relief from this tax for several categories of non-business expenses are considered by social entrepreneurs to be an insignificant kind of support. There is also lack of experience and practice regarding the inclusion of social criteria in public procurement in Latvia.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"45 1","pages":"76 - 84"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47910789","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
I. Pilvere, Mihails Silovs, J. Ozoliņš, Aleksejs Nipers, Olga Dmitrijeva
Abstract To survive in today's competitive environment, companies must continuously develop and offer customers new products. To increase the probability of a successful business case of investing in the development of a new product, careful attention must be paid to risk analysis in terms of the present value of future potential income. The article considers an example of the research work of the Latvia University of Life Sciences and Technologies, in the framework of which a technical and technological project was developed to produce a new product, like Mediterranean anchovy, from cheaper Baltic sprats. The main goal of this work is to explore the application multi-factor sensitivity and fuzzy real option analysis to the valuation of new product development project. The multivariate analysis of the sensitivity of the financial model of the greenfield production project described in this article revealed the main risk groups, as well as their degree of influence on the assessment of the Net Present Value of the project by a potential investor. The use of Fuzzy Real Option Valuation made it possible to evaluate the project with uncertain parameters, as well as to calculate the potential upside from preliminary refinement of parameters to eliminate negative scenarios. The described approach is applicable to risk assessment of new food product development and allows investors to make a more informed decision about participation in such projects.
{"title":"Project Valuation and Risk Assessment in Food Product Development: Evidence from Fuzzy Real Option Valuation","authors":"I. Pilvere, Mihails Silovs, J. Ozoliņš, Aleksejs Nipers, Olga Dmitrijeva","doi":"10.2478/plua-2021-0006","DOIUrl":"https://doi.org/10.2478/plua-2021-0006","url":null,"abstract":"Abstract To survive in today's competitive environment, companies must continuously develop and offer customers new products. To increase the probability of a successful business case of investing in the development of a new product, careful attention must be paid to risk analysis in terms of the present value of future potential income. The article considers an example of the research work of the Latvia University of Life Sciences and Technologies, in the framework of which a technical and technological project was developed to produce a new product, like Mediterranean anchovy, from cheaper Baltic sprats. The main goal of this work is to explore the application multi-factor sensitivity and fuzzy real option analysis to the valuation of new product development project. The multivariate analysis of the sensitivity of the financial model of the greenfield production project described in this article revealed the main risk groups, as well as their degree of influence on the assessment of the Net Present Value of the project by a potential investor. The use of Fuzzy Real Option Valuation made it possible to evaluate the project with uncertain parameters, as well as to calculate the potential upside from preliminary refinement of parameters to eliminate negative scenarios. The described approach is applicable to risk assessment of new food product development and allows investors to make a more informed decision about participation in such projects.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"45 1","pages":"38 - 52"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42788806","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Feeding young animals is a very important stage during their growing-up period, but in order to provide them with essential nutrients, they are fed with liquid feeds, whole milk substitute in particular (WMS). The technique for reconstituting WMS consists of dissolving it in water followed by mixing, but it is significant to follow the cooking recipe strictly, so it is necessary to develop a system with a feeding (dosing) device that will make it possible to solve this problem. Theoretical and experimental studies of the feeding device have been conducted in order to optimize the technological process of mixing liquid feed. Theoretically, the quality of determining the mixture during dosing was established for the purpose of further research. The influence of the design and technological parameters of the feeding device was experimentally studied, and its efficiency was evaluated. It was found that as the inclination angle α increases from 67,50 to 700, the rotation speed n being from 850 to 1500 min−1, the maximum probability of staying in the tolerance field ΔP=96% is reached, and feed discharge Q ranges from 540 to 660 kg h−1. The research makes it possible to develop a feeding device at the design stage, meeting the requirements of the recipe, having high discharge rates and the lowest energy consumption.
摘要饲喂幼龄动物是幼龄动物成长过程中非常重要的一个阶段,为了给幼龄动物提供必需的营养物质,通常采用液体饲料,特别是全脂牛奶替代品(WMS)进行饲喂。重建WMS的技术是将其溶解在水中然后混合,但严格遵循烹饪配方是很重要的,因此有必要开发一种带有加料(加药)装置的系统,使其有可能解决这一问题。为了优化液体饲料混合工艺流程,对进料装置进行了理论和实验研究。理论上,为进一步的研究建立了在加药过程中确定混合物的质量。实验研究了进料装置的设计和工艺参数对进料装置的影响,并对其效率进行了评价。结果表明,当倾角α从67、50增加到700,转速n在850 ~ 1500 min−1范围内时,停留在公差场ΔP=96%的概率最大,给料量Q在540 ~ 660 kg h−1范围内。本研究使在设计阶段研制出满足配方要求、出料率高、能耗低的加料装置成为可能。
{"title":"Determination and Optimization of Feeding Device Parametres in the Plant for Preparing Liquid Feed Mixtures","authors":"P. Solonshchikov, P. Savinykh, S. Ivanovs","doi":"10.2478/plua-2021-0003","DOIUrl":"https://doi.org/10.2478/plua-2021-0003","url":null,"abstract":"Abstract Feeding young animals is a very important stage during their growing-up period, but in order to provide them with essential nutrients, they are fed with liquid feeds, whole milk substitute in particular (WMS). The technique for reconstituting WMS consists of dissolving it in water followed by mixing, but it is significant to follow the cooking recipe strictly, so it is necessary to develop a system with a feeding (dosing) device that will make it possible to solve this problem. Theoretical and experimental studies of the feeding device have been conducted in order to optimize the technological process of mixing liquid feed. Theoretically, the quality of determining the mixture during dosing was established for the purpose of further research. The influence of the design and technological parameters of the feeding device was experimentally studied, and its efficiency was evaluated. It was found that as the inclination angle α increases from 67,50 to 700, the rotation speed n being from 850 to 1500 min−1, the maximum probability of staying in the tolerance field ΔP=96% is reached, and feed discharge Q ranges from 540 to 660 kg h−1. The research makes it possible to develop a feeding device at the design stage, meeting the requirements of the recipe, having high discharge rates and the lowest energy consumption.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"45 1","pages":"13 - 20"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44048262","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
I. Gramatina, Janis Sauka, Aleksandrs Semjonovs, Sintija Strode, E. Straumite
Abstract Fermentation is one of the ancient technological processes used in food production which influences the shelf-life of meat and meat products, also significantly affects the sensory properties like aroma and flavour. The objective of the present study was to evaluate the elaborated technology for a new fermented sausage production on the product quality and sensory properties. Sausages were produced by the standard technology using glucono-delta-lactone or starter culture. The drying of samples differs from 3 to 4 weeks at the same conditions; samples were dried for 4 weeks which produced with the starter culture, and 3 weeks which produced with glucono-delta-lactone. The sausages were tested at the end of the production, analysing pH, water activity, moisture and salt content, as well as the presence of Listeria monocytogenes, colony forming units of Listeria monocytogenes and Enterobacteriaceae in the sausage samples were analysed. The sensory evaluation was organised after getting Listeria monocytogenes testing results. The moisture content, water activity and salt content significantly differed (p < 0.05) among samples, no differences were established in pH, taste and flavour liking. The presence of Listeria monocytogenes was not established in samples which indicates that the producer properly applies a hurdle technology in fermented sausage production. Sensory evaluation results showed higher scores for texture and appearance in fermented sausages with glucono-delta-lactone. The study results confirmed that fermented sausages with glucono-delta-lactone during 3 weeks of drying can achieve corresponding safety criteria and sensory properties which are set for semidry fermented sausages.
{"title":"The Influence of Technological Peculiarities on Fermented Sausages’ Quality and Sensory Properties","authors":"I. Gramatina, Janis Sauka, Aleksandrs Semjonovs, Sintija Strode, E. Straumite","doi":"10.2478/plua-2021-0001","DOIUrl":"https://doi.org/10.2478/plua-2021-0001","url":null,"abstract":"Abstract Fermentation is one of the ancient technological processes used in food production which influences the shelf-life of meat and meat products, also significantly affects the sensory properties like aroma and flavour. The objective of the present study was to evaluate the elaborated technology for a new fermented sausage production on the product quality and sensory properties. Sausages were produced by the standard technology using glucono-delta-lactone or starter culture. The drying of samples differs from 3 to 4 weeks at the same conditions; samples were dried for 4 weeks which produced with the starter culture, and 3 weeks which produced with glucono-delta-lactone. The sausages were tested at the end of the production, analysing pH, water activity, moisture and salt content, as well as the presence of Listeria monocytogenes, colony forming units of Listeria monocytogenes and Enterobacteriaceae in the sausage samples were analysed. The sensory evaluation was organised after getting Listeria monocytogenes testing results. The moisture content, water activity and salt content significantly differed (p < 0.05) among samples, no differences were established in pH, taste and flavour liking. The presence of Listeria monocytogenes was not established in samples which indicates that the producer properly applies a hurdle technology in fermented sausage production. Sensory evaluation results showed higher scores for texture and appearance in fermented sausages with glucono-delta-lactone. The study results confirmed that fermented sausages with glucono-delta-lactone during 3 weeks of drying can achieve corresponding safety criteria and sensory properties which are set for semidry fermented sausages.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"45 1","pages":"1 - 6"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48641106","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Zacepins, A. Kviesis, V. Komašilovs, V. Brusbardis, Janis Kronbergs
Abstract Information and communication technologies are part of almost any branch of human lives. During the last decade also beekeeping joined the direction of application of IT tools and solutions and precision beekeeping was defined. Still in the beekeeping many operations and observations are completed manually, and there is a potential to switch to the digital realisation. Information technologies can be used in the beekeeping to partly support the beekeepers by implementation of automatic or semi-automatic solutions for bee colony remote monitoring, apiary record making and other actions. The aim of this paper is to make a summary of the usage of information technology tools by the beekeepers in Latvia, summarizing precision beekeeping development status and conclude about its future development potential. To achieve this aim, in cooperation with Latvian Beekeepers Association, a beekeepers survey was conducted. More than 200 beekeepers shared thoughts and opinions about their application of information and communication technologies for monitoring the bee colonies and apiary management. The summary of the survey conducted is described in this study.
{"title":"Status of the Precision Beekeeping Development in Latvia","authors":"A. Zacepins, A. Kviesis, V. Komašilovs, V. Brusbardis, Janis Kronbergs","doi":"10.2478/plua-2021-0010","DOIUrl":"https://doi.org/10.2478/plua-2021-0010","url":null,"abstract":"Abstract Information and communication technologies are part of almost any branch of human lives. During the last decade also beekeeping joined the direction of application of IT tools and solutions and precision beekeeping was defined. Still in the beekeeping many operations and observations are completed manually, and there is a potential to switch to the digital realisation. Information technologies can be used in the beekeeping to partly support the beekeepers by implementation of automatic or semi-automatic solutions for bee colony remote monitoring, apiary record making and other actions. The aim of this paper is to make a summary of the usage of information technology tools by the beekeepers in Latvia, summarizing precision beekeeping development status and conclude about its future development potential. To achieve this aim, in cooperation with Latvian Beekeepers Association, a beekeepers survey was conducted. More than 200 beekeepers shared thoughts and opinions about their application of information and communication technologies for monitoring the bee colonies and apiary management. The summary of the survey conducted is described in this study.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"45 1","pages":"86 - 92"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48759298","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
O. Datsii, N. Levchenko, G. Shyshkanova, R. Dmytrenko, G. Abuselidze
Abstract It is stated that the strategic benchmark for transformational changes in the economy is currently low-carbon production, the achievement of which is possible to provide with the consistent application of an arsenal of strict control measures, in particular, the introduction of state audit of low-carbon production. The effectiveness of the mechanism for ensuring the implementation of the UN Framework Convention on Climate Change has been assessed. The necessity of implementation in the domestic practice of the state audit of low-carbon production by the decoupling approach is proved. The agri-business portfolio has been formed according to the decoupling approach as one of the leaders in greenhouse gas pollution. The author's economic and mathematical models of estimation according to the decoupling approach of the impact of branches of crop and livestock production on environmental pollution are proposed. The dependence of greenhouse gas emissions on the volume of gross output of agricultural production, capital investment and current expenditures on environmental protection has been established. The results of a comparative analysis of the realism of forecasts of changes in greenhouse gas emissions according to the methodology of the National Academy of Sciences of Ukraine and the author's methodology are highlighted. A roadmap for the introduction of a state low-carbon decoupling audit of the state decoupling audit has been proposed as part of the preparation of the second nationally determined contribution to the Paris Agreement. The expediency of supplementing GRI 300 “Environmental Disclosures” with the group of indicators GRI-305.5 “Reduction of GHG emissions”, formed by the decoupling approach, is substantiated.
{"title":"State Decoupling Audit of Low-Carbon Agricultural Production","authors":"O. Datsii, N. Levchenko, G. Shyshkanova, R. Dmytrenko, G. Abuselidze","doi":"10.2478/plua-2021-0011","DOIUrl":"https://doi.org/10.2478/plua-2021-0011","url":null,"abstract":"Abstract It is stated that the strategic benchmark for transformational changes in the economy is currently low-carbon production, the achievement of which is possible to provide with the consistent application of an arsenal of strict control measures, in particular, the introduction of state audit of low-carbon production. The effectiveness of the mechanism for ensuring the implementation of the UN Framework Convention on Climate Change has been assessed. The necessity of implementation in the domestic practice of the state audit of low-carbon production by the decoupling approach is proved. The agri-business portfolio has been formed according to the decoupling approach as one of the leaders in greenhouse gas pollution. The author's economic and mathematical models of estimation according to the decoupling approach of the impact of branches of crop and livestock production on environmental pollution are proposed. The dependence of greenhouse gas emissions on the volume of gross output of agricultural production, capital investment and current expenditures on environmental protection has been established. The results of a comparative analysis of the realism of forecasts of changes in greenhouse gas emissions according to the methodology of the National Academy of Sciences of Ukraine and the author's methodology are highlighted. A roadmap for the introduction of a state low-carbon decoupling audit of the state decoupling audit has been proposed as part of the preparation of the second nationally determined contribution to the Paris Agreement. The expediency of supplementing GRI 300 “Environmental Disclosures” with the group of indicators GRI-305.5 “Reduction of GHG emissions”, formed by the decoupling approach, is substantiated.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"45 1","pages":"94 - 112"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42093464","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
B. Bankina, G. Bimšteine, I. Arhipova, J. Kaneps, M. Darguza
Abstract Reduced tillage is considered as one of the main tools to save biological diversity; however, it increases pressure of diseases, including wheat leaf blotches. The aim of present study was to clarify the impact of reduced soil tillage on the development of winter wheat leaf blotches in different schemes of crop rotation. The impact of different growing technologies on the severity of winter wheat disease was evaluated in a two-factorial experiment: A – soil tillage system, and B – different combinations of wheat pre-pre-crop and pre-crop (wheat, oilseed rape, barley and faba beans). Diseases were assessed every 10 days approximately and total impact of diseases was evaluated by calculating AUDPC (Area under Diseases Progress Curve). Tan spot, caused by Pyrenophora tritici-repentis was dominated disease over the long period, regardless of meteorological conditions. Development of Septoria leaf blotch was not influenced by neither crop rotation nor soil tillage. The level of tan spot was essentially higher after wheat, regardless of the pre-pre-crop. Reduced soil tillage promoted severity of tan spot. Ploughing mitigated effect of previous crops and differences in tan spot level were insignificant. Despite many positive effects of conservation tillage, increasing of fungicide treatment could be necessary, in conditions, when the tan spot is most devastating and widespread wheat disease.
{"title":"Impact of Crop Rotation and Soil Tillage on the Severity of Winter Wheat Leaf Blotches","authors":"B. Bankina, G. Bimšteine, I. Arhipova, J. Kaneps, M. Darguza","doi":"10.2478/plua-2021-0004","DOIUrl":"https://doi.org/10.2478/plua-2021-0004","url":null,"abstract":"Abstract Reduced tillage is considered as one of the main tools to save biological diversity; however, it increases pressure of diseases, including wheat leaf blotches. The aim of present study was to clarify the impact of reduced soil tillage on the development of winter wheat leaf blotches in different schemes of crop rotation. The impact of different growing technologies on the severity of winter wheat disease was evaluated in a two-factorial experiment: A – soil tillage system, and B – different combinations of wheat pre-pre-crop and pre-crop (wheat, oilseed rape, barley and faba beans). Diseases were assessed every 10 days approximately and total impact of diseases was evaluated by calculating AUDPC (Area under Diseases Progress Curve). Tan spot, caused by Pyrenophora tritici-repentis was dominated disease over the long period, regardless of meteorological conditions. Development of Septoria leaf blotch was not influenced by neither crop rotation nor soil tillage. The level of tan spot was essentially higher after wheat, regardless of the pre-pre-crop. Reduced soil tillage promoted severity of tan spot. Ploughing mitigated effect of previous crops and differences in tan spot level were insignificant. Despite many positive effects of conservation tillage, increasing of fungicide treatment could be necessary, in conditions, when the tan spot is most devastating and widespread wheat disease.","PeriodicalId":30922,"journal":{"name":"Rural Sustainability Research","volume":"45 1","pages":"21 - 27"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43877053","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}