Pub Date : 2021-06-25DOI: 10.20998/2074-272x.2021.3.08
G. Bezprozvannych, I. Kostiukov
Introduction. The wave parameters of power cables with polymer insulation differ significantly from the parameters of overhead lines and power transformers. As a result, there are more and more objects in electrical networks for which the occurrence of complex multi frequency transients, accompanied by dangerous overvoltages, should be expected. Purpose. To develop a computational model of the complex impedance of high-voltage single-core power cables of coaxial design required to determine the frequency dependencies of the active resistance and inductance of the conductive core and metal shield, taking into account the surface effect and proximity effect. Methodology. The method is based on solving a system of linear algebraic Kirchhoff equations (SLAE) for magnetically coupled contours. SLAE can be used to calculate conductors taking into account the skin effect and proximity effect. Practical value. The developed model is the basis for determining the characteristic impedance of high-voltage single-core power cables in a wide range of frequencies required to establish adequate criteria for evaluating the parameters of high-frequency effects critical for cross linked polyethylene insulation.
{"title":"A calculation model for determination of impedance of power high voltage single-core cables with polymer insulation","authors":"G. Bezprozvannych, I. Kostiukov","doi":"10.20998/2074-272x.2021.3.08","DOIUrl":"https://doi.org/10.20998/2074-272x.2021.3.08","url":null,"abstract":"Introduction. The wave parameters of power cables with polymer insulation differ significantly from the parameters of overhead lines and power transformers. As a result, there are more and more objects in electrical networks for which the occurrence of complex multi frequency transients, accompanied by dangerous overvoltages, should be expected. Purpose. To develop a computational model of the complex impedance of high-voltage single-core power cables of coaxial design required to determine the frequency dependencies of the active resistance and inductance of the conductive core and metal shield, taking into account the surface effect and proximity effect. Methodology. The method is based on solving a system of linear algebraic Kirchhoff equations (SLAE) for magnetically coupled contours. SLAE can be used to calculate conductors taking into account the skin effect and proximity effect. Practical value. The developed model is the basis for determining the characteristic impedance of high-voltage single-core power cables in a wide range of frequencies required to establish adequate criteria for evaluating the parameters of high-frequency effects critical for cross linked polyethylene insulation.","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115935894","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-06-25DOI: 10.20998/2074-272x.2021.3.06
K. Chunikhin, V. Grinchenko
This paper deals with the mitigation of 110 kV double-circuit overhead line magnetic field inside five-story Khrushchev buildings. We show that the magnetic field can exceed the reference level 0.5 μT in 90 % part of living space. To mitigate the magnetic field, we propose the inverted L-shaped grid shield with conductors on the wall and in the attic of the building. Using the analytical model of the grid shield and the numerical simulation, we determine the parameters of the L-shaped grid shield which provides the magnetic field normalization in 97 % part of living space. Further improvement of the grid shield profile, in particular, the placement of some conductors in the basement, allows to reduce the quantity of metal of the shield by 15 % while maintaining the shielding efficiency. Also we consider the magnetic field normalization for the overhead line with a rated current of 500 A. In this case, the quantity of metal of the grid shield increases 2.74 times.
{"title":"Normalization of Double-Circuit Overhead Line Magnetic Field inside Khrushchev Building","authors":"K. Chunikhin, V. Grinchenko","doi":"10.20998/2074-272x.2021.3.06","DOIUrl":"https://doi.org/10.20998/2074-272x.2021.3.06","url":null,"abstract":"This paper deals with the mitigation of 110 kV double-circuit overhead line magnetic field inside five-story Khrushchev buildings. We show that the magnetic field can exceed the reference level 0.5 μT in 90 % part of living space. To mitigate the magnetic field, we propose the inverted L-shaped grid shield with conductors on the wall and in the attic of the building. Using the analytical model of the grid shield and the numerical simulation, we determine the parameters of the L-shaped grid shield which provides the magnetic field normalization in 97 % part of living space. Further improvement of the grid shield profile, in particular, the placement of some conductors in the basement, allows to reduce the quantity of metal of the shield by 15 % while maintaining the shielding efficiency. Also we consider the magnetic field normalization for the overhead line with a rated current of 500 A. In this case, the quantity of metal of the grid shield increases 2.74 times.","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123113487","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-04-05DOI: 10.20998/2074-272X.2021.2.08
N. Benchouia, Mohammed Saaidia
As gas pipeline systems become larger and more complex, the importance of optimally operating and planning these facilities has increased. The capital costs and operating expenses of pipeline systems are so large that even small improvements in the use of the system can involve large sums of money. Purpose. This article proposes a method to improve the reliability and optimization of power supply systems for compressor stations. The novelty of the proposed work is the development of a new mathematical model that allows the choice of the most appropriate maintenance policies in the best way to significantly reduce costs as well as to optimize useful key performance indicators – failure rate, average time between breakdowns, the average repair time for equipment in compressor station electrical supply systems. Applying graph theory to represent this mathematical model from the schematic diagram of the different energy sources with respect to the five compressor stations is adequate. Methods. The problem that arises for the future operator or operator is, among others, how to balance two main aspects: a technical aspect and an economic aspect. The proposed methodology introduces a research algorithm to calculate the optimal values of the operating parameters of the power supply systems of compressor stations by combining technical and economic aspects in order to reduce costs and increase performance indicators. The proposed algorithm can be implemented in FORTRAN code. Results. The algorithm developed is an efficient tool for calculating maintenance costs and allows by means of programming to define the most appropriate maintenance policy. On the other hand, this technique could be used as an essential economic evaluation indicator for other equipment in order to choose among all the technically possible solutions the one which allow obtaining the best economic result. Practical value. The proposed algorithm has been examined in this third variant of the supply system with two turbogenerators. The result of the optimization shows a clear preference for selecting station C for the pipeline as this presents the minimum cost which is the definition of the algorithm optimizer. Then, it is important to adopt the most recommended maintenance policies and practices in order to ensure the availability of the power supply systems and to avoid unplanned outages with the resulting loss of production.
{"title":"Optimization and Reliability of the Power Supply Systems of a Compressor Station","authors":"N. Benchouia, Mohammed Saaidia","doi":"10.20998/2074-272X.2021.2.08","DOIUrl":"https://doi.org/10.20998/2074-272X.2021.2.08","url":null,"abstract":"As gas pipeline systems become larger and more complex, the importance of optimally operating and planning these facilities has increased. The capital costs and operating expenses of pipeline systems are so large that even small improvements in the use of the system can involve large sums of money. Purpose. This article proposes a method to improve the reliability and optimization of power supply systems for compressor stations. The novelty of the proposed work is the development of a new mathematical model that allows the choice of the most appropriate maintenance policies in the best way to significantly reduce costs as well as to optimize useful key performance indicators – failure rate, average time between breakdowns, the average repair time for equipment in compressor station electrical supply systems. Applying graph theory to represent this mathematical model from the schematic diagram of the different energy sources with respect to the five compressor stations is adequate. Methods. The problem that arises for the future operator or operator is, among others, how to balance two main aspects: a technical aspect and an economic aspect. The proposed methodology introduces a research algorithm to calculate the optimal values of the operating parameters of the power supply systems of compressor stations by combining technical and economic aspects in order to reduce costs and increase performance indicators. The proposed algorithm can be implemented in FORTRAN code. Results. The algorithm developed is an efficient tool for calculating maintenance costs and allows by means of programming to define the most appropriate maintenance policy. On the other hand, this technique could be used as an essential economic evaluation indicator for other equipment in order to choose among all the technically possible solutions the one which allow obtaining the best economic result. Practical value. The proposed algorithm has been examined in this third variant of the supply system with two turbogenerators. The result of the optimization shows a clear preference for selecting station C for the pipeline as this presents the minimum cost which is the definition of the algorithm optimizer. Then, it is important to adopt the most recommended maintenance policies and practices in order to ensure the availability of the power supply systems and to avoid unplanned outages with the resulting loss of production.","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-04-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130050917","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-02-23DOI: 10.20998/2074-272X.2021.1.02
V. Vasilevskij, M. Poliakov
Introduction. One of the parameters that determine the state of the insulation of power transformers is the degree of moisture content of cellulose insulation and transformer oil. Modern systems of continuous monitoring of transformer equipment have the ability to accumulate data that can be used to reproduce the dynamics of moisture content in insulation. The purpose of the work is to reproduce the curve of the of humidity of transformer oil based on the results of measuring the temperature of the upper and lower layers of oil without the need for direct measurement of moisture content by special devices. Methodology. The construction of a fuzzy neural network is carried out using networks based on adaptive neuro-fuzzy system ANFIS. The network generated using the Grid Partition algorithm without clustering and Subtractive Clustering. Results. The paper presents a comparative analysis of fuzzy neural networks of various architectures in terms of increasing the accuracy of reproducing the moisture content of transformer oil. For training and testing fuzzy neural networks, the results of continuous monitoring of the temperature of the upper and lower layers of transformer oil during two months of operation used. Considered twenty four variants of the architecture of ANFIS models, which differ in the membership functions, the number of terms of each input quantity, and the number of training cycles. The results of using the constructed fuzzy neural networks for reproducing the dynamics of moisture content of transformer oil during a month of operation of the transformer are presented. The reproducing accuracy was assessed using the root mean square error and the coefficient of determination. The test results indicate the sufficient adequacy of the proposed models. Consequently, the RMSE value for the network constructed using Grid Partition method was 0.49, and for the network built using the Subtractive Clustering method – 0.40509.
{"title":"Reproducing of the Humidity Curve of Power Transformers Oil Using Adaptive Neuro-Fuzzy Systems","authors":"V. Vasilevskij, M. Poliakov","doi":"10.20998/2074-272X.2021.1.02","DOIUrl":"https://doi.org/10.20998/2074-272X.2021.1.02","url":null,"abstract":"Introduction. One of the parameters that determine the state of the insulation of power transformers is the degree of moisture content of cellulose insulation and transformer oil. Modern systems of continuous monitoring of transformer equipment have the ability to accumulate data that can be used to reproduce the dynamics of moisture content in insulation. The purpose of the work is to reproduce the curve of the of humidity of transformer oil based on the results of measuring the temperature of the upper and lower layers of oil without the need for direct measurement of moisture content by special devices. Methodology. The construction of a fuzzy neural network is carried out using networks based on adaptive neuro-fuzzy system ANFIS. The network generated using the Grid Partition algorithm without clustering and Subtractive Clustering. Results. The paper presents a comparative analysis of fuzzy neural networks of various architectures in terms of increasing the accuracy of reproducing the moisture content of transformer oil. For training and testing fuzzy neural networks, the results of continuous monitoring of the temperature of the upper and lower layers of transformer oil during two months of operation used. Considered twenty four variants of the architecture of ANFIS models, which differ in the membership functions, the number of terms of each input quantity, and the number of training cycles. The results of using the constructed fuzzy neural networks for reproducing the dynamics of moisture content of transformer oil during a month of operation of the transformer are presented. The reproducing accuracy was assessed using the root mean square error and the coefficient of determination. The test results indicate the sufficient adequacy of the proposed models. Consequently, the RMSE value for the network constructed using Grid Partition method was 0.49, and for the network built using the Subtractive Clustering method – 0.40509.","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-02-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127793222","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-02-23DOI: 10.20998/2074-272X.2021.1.01
V. Bolyukh, Y. V. Kashansky, I. S. Schukin
Purpose. The purpose of the article is to establish the basic laws of operation of induction-type linear electromechanical converter (LEMС) during operation in high-speed and shock-power modes and excitation from an AC source of increased frequency. Methodology. With the help of a mathematical model, the regularities of the course of processes in a LEMС, excited from an AC source, were established when working with shock-power and high-speed modes. The solutions of the equations of the mathematical model, which describe interrelated electrical, magnetic, mechanical and thermal processes, are presented in a recurrent form. Results. It was found that when the LEMC operates in the shock-power mode, the maximum value of the current in the inductor winding occurs in the first half-period, and in the inhibited armature winding in the second half-period. The electrodynamic force changes at twice the frequency, taking on both positive and negative values. Since the positive values exceed the negative ones, the magnitude of the impulse of the electrodynamic force increases with each period of the force. Depending on the initial voltage phase, the relative change in the magnitude of the force impulse is 1.5 %. It was found that when the LEMC operates in high-speed mode, the current in the inductor winding in the first half-period has the greatest value, but after several periods it takes on a steady state. The temperature rise of the inductor winding increases with the time of connection to the AC source, and the temperature rise of the armature winding has the nature of saturation. The electrodynamic force has an oscillatory character with strong damping and a significant predominance of the positive component. Depending on the initial phase of the voltage, the relative change in the maximum speed of the armature winding is 2.5 %. Originality. For the first time, a mathematical model of the LEMC, excited from an AC source, was developed, the solutions of the equations of which describe the interrelated electrical, magnetic, mechanical and thermal processes. For the first time, the regularities of the course of processes in LEMC were established when working with shock-power and high-speed modes. Practical value. The characteristics of LEMC are obtained, which determine the efficiency of work in shock-power and high-speed modes. It is shown that the initial voltage phase has no significant effect on the power, high-speed thermal performance of the converter excited from an alternating current source.
{"title":"Features of Excitation of a Linear Electromechanical Converter of Induction Type from An AC Source","authors":"V. Bolyukh, Y. V. Kashansky, I. S. Schukin","doi":"10.20998/2074-272X.2021.1.01","DOIUrl":"https://doi.org/10.20998/2074-272X.2021.1.01","url":null,"abstract":"Purpose. The purpose of the article is to establish the basic laws of operation of induction-type linear electromechanical converter (LEMС) during operation in high-speed and shock-power modes and excitation from an AC source of increased frequency. Methodology. With the help of a mathematical model, the regularities of the course of processes in a LEMС, excited from an AC source, were established when working with shock-power and high-speed modes. The solutions of the equations of the mathematical model, which describe interrelated electrical, magnetic, mechanical and thermal processes, are presented in a recurrent form. Results. It was found that when the LEMC operates in the shock-power mode, the maximum value of the current in the inductor winding occurs in the first half-period, and in the inhibited armature winding in the second half-period. The electrodynamic force changes at twice the frequency, taking on both positive and negative values. Since the positive values exceed the negative ones, the magnitude of the impulse of the electrodynamic force increases with each period of the force. Depending on the initial voltage phase, the relative change in the magnitude of the force impulse is 1.5 %. It was found that when the LEMC operates in high-speed mode, the current in the inductor winding in the first half-period has the greatest value, but after several periods it takes on a steady state. The temperature rise of the inductor winding increases with the time of connection to the AC source, and the temperature rise of the armature winding has the nature of saturation. The electrodynamic force has an oscillatory character with strong damping and a significant predominance of the positive component. Depending on the initial phase of the voltage, the relative change in the maximum speed of the armature winding is 2.5 %. Originality. For the first time, a mathematical model of the LEMC, excited from an AC source, was developed, the solutions of the equations of which describe the interrelated electrical, magnetic, mechanical and thermal processes. For the first time, the regularities of the course of processes in LEMC were established when working with shock-power and high-speed modes. Practical value. The characteristics of LEMC are obtained, which determine the efficiency of work in shock-power and high-speed modes. It is shown that the initial voltage phase has no significant effect on the power, high-speed thermal performance of the converter excited from an alternating current source.<br><br>","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-02-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120933348","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-12-13DOI: 10.31014/aior.1992.03.04.305
A. Haidari
Electricity is the key input for urban and rural development which directly effects households’ welfare in micro-level. Least developed countries policy focus on electrifying rural area through off-grid electricity because of high cost in connecting remote areas to national grid. This research estimates the welfare effects of Shorabak small hydropower in Fayzabad city of Badakhshan province, considering the wellbeing of residences in Taliqan city of Takhar provice that obtained from imported electricity from Tajikistan. The dependent variables of education, saving, health, employment, information and environment used as determinant of welfare in linear regression models. Residences of Fayzabad and Taliqan cities constituted the target population, who interviewed through 400 questionnaire using purposive samplings. For the purpose of analysis, regression models run in SPSS version 25. It was found that full access to electricity in Taliqan city positively changed study hours, saving via cheap per kW fee, decreased illness caused by utilizing wood, fuel for cooking and heating purposes. Furthermore, the level of information increased because of access to media particularly TV. A positive notion seen in keeping environment green by removing wood in households as result of using electricity instead. Generally the findings show, by Shorabak hydropower plant inauguration which is 90% completed the same welfare increase will be felt in Fayzabad city as well.
{"title":"Rural Electrification and Its Impact on Households’ Welfare","authors":"A. Haidari","doi":"10.31014/aior.1992.03.04.305","DOIUrl":"https://doi.org/10.31014/aior.1992.03.04.305","url":null,"abstract":"Electricity is the key input for urban and rural development which directly effects households’ welfare in micro-level. Least developed countries policy focus on electrifying rural area through off-grid electricity because of high cost in connecting remote areas to national grid. This research estimates the welfare effects of Shorabak small hydropower in Fayzabad city of Badakhshan province, considering the wellbeing of residences in Taliqan city of Takhar provice that obtained from imported electricity from Tajikistan. The dependent variables of education, saving, health, employment, information and environment used as determinant of welfare in linear regression models. Residences of Fayzabad and Taliqan cities constituted the target population, who interviewed through 400 questionnaire using purposive samplings. For the purpose of analysis, regression models run in SPSS version 25. It was found that full access to electricity in Taliqan city positively changed study hours, saving via cheap per kW fee, decreased illness caused by utilizing wood, fuel for cooking and heating purposes. Furthermore, the level of information increased because of access to media particularly TV. A positive notion seen in keeping environment green by removing wood in households as result of using electricity instead. Generally the findings show, by Shorabak hydropower plant inauguration which is 90% completed the same welfare increase will be felt in Fayzabad city as well.","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2020-12-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127652380","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-12-13DOI: 10.20998/2074-272x.2020.6.02
A. Stavinskiy, A. M. Tsyganov
Goal. The purpose of the work is to analyze the features and substantiate the advantages of the spatial radial electromagnetic system of a single-phase transformer with rectangular sections of the rods of a charged magnetic circuit. Methodology. Improvement of single-phase transformers is possible by structural-geometric transformations of active elements. The justification of the advantages of such transformations is achieved by the method of invariant objective functions with dimensionless optimization components and universal relative controlled variables. Results. Replacing the rectangular contours of the variants of a planar magnetic circuit with a hexagonal circuit leads to a decrease in the volume of steel and the loss of three angular zones of changes in the direction of the magnetic flux relative to the texture compared to planar counterparts. The separation of the windings into sections with an arrangement on three rods leads to a decrease in the average length of the coil. Originality. A three-core magnetic core can consist of rod and jugular-angular parallelogram plates of anisotropic and isotropic electrical steel. It is advisable to combine a combination of steels by integral welding of billets with subsequent separation into chevron jugular-rod elements. The method called on has developed mathematical models of the mass, cost, and active power losses of variants of a single-phase electromagnetic system of a transformer with rod and armor planar and spatial radial three-core magnetic cores. Practical significance. It was found that the decrease in the extrema of the mass and cost indicators, as well as the calculated decrease, under the condition that the coefficients of additional losses are identical, the extrema of the losses of the single-phase radial three-rod system of the transformer relative to the planar analogue with a bar stocked magnetic wire from anisotropic steel, respectively 13,0-12,3 %, 15,3-10,1 % and 15,1-18,1 % with copper windings and 10,8-10,2 %, 12,8-13,7 % and 12,6-12,3 % with aluminum windings. The main indicators of traditional single-phase systems with rod and armored magnetic circuits differ insignificantly, which is consistent with early known optimization and calculation data of transformers.
{"title":"Design and Technological Proposals for Improving a Single-Phase Transformer With Laminated Magnetic Core","authors":"A. Stavinskiy, A. M. Tsyganov","doi":"10.20998/2074-272x.2020.6.02","DOIUrl":"https://doi.org/10.20998/2074-272x.2020.6.02","url":null,"abstract":"Goal. The purpose of the work is to analyze the features and substantiate the advantages of the spatial radial electromagnetic system of a single-phase transformer with rectangular sections of the rods of a charged magnetic circuit. Methodology. Improvement of single-phase transformers is possible by structural-geometric transformations of active elements. The justification of the advantages of such transformations is achieved by the method of invariant objective functions with dimensionless optimization components and universal relative controlled variables. Results. Replacing the rectangular contours of the variants of a planar magnetic circuit with a hexagonal circuit leads to a decrease in the volume of steel and the loss of three angular zones of changes in the direction of the magnetic flux relative to the texture compared to planar counterparts. The separation of the windings into sections with an arrangement on three rods leads to a decrease in the average length of the coil. Originality. A three-core magnetic core can consist of rod and jugular-angular parallelogram plates of anisotropic and isotropic electrical steel. It is advisable to combine a combination of steels by integral welding of billets with subsequent separation into chevron jugular-rod elements. The method called on has developed mathematical models of the mass, cost, and active power losses of variants of a single-phase electromagnetic system of a transformer with rod and armor planar and spatial radial three-core magnetic cores. Practical significance. It was found that the decrease in the extrema of the mass and cost indicators, as well as the calculated decrease, under the condition that the coefficients of additional losses are identical, the extrema of the losses of the single-phase radial three-rod system of the transformer relative to the planar analogue with a bar stocked magnetic wire from anisotropic steel, respectively 13,0-12,3 %, 15,3-10,1 % and 15,1-18,1 % with copper windings and 10,8-10,2 %, 12,8-13,7 % and 12,6-12,3 % with aluminum windings. The main indicators of traditional single-phase systems with rod and armored magnetic circuits differ insignificantly, which is consistent with early known optimization and calculation data of transformers.","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2020-12-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128994893","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-12-13DOI: 10.20998/2074-272x.2020.6.07
R. Kouadri, L. Slimani, T. Bouktir
Purpose. This paper proposes the application procedure of a new metaheuristic technique in a practical electrical power system to solve optimal power flow problems, this technique namely the slime mould algorithm (SMA) which is inspired by the swarming behavior and morphology of slime mould in nature. This study aims to test and verify the effectiveness of the proposed algorithm to get good solutions for optimal power flow problems by incorporating stochastic wind power generation and static VAR compensators devices. In this context, different cases are considered in order to minimize the total generation cost, reduction of active power losses as well as improving voltage profile. Methodology. The objective function of our problem is considered to be the minimum the total costs of conventional power generation and stochastic wind power generation with satisfying the power system constraints. The stochastic wind power function considers the penalty cost due to the underestimation and the reserve cost due to the overestimation of available wind power. In this work, the function of Weibull probability density is used to model and characterize the distributions of wind speed. Practical value. The proposed algorithm was examined on the IEEE-30 bus system and a large Algerian electrical test system with 114 buses. In the cases with the objective is to minimize the conventional power generation, the achieved results in both of the testing power systems showed that the slime mould algorithm performs better than other existing optimization techniques. Additionally, the achieved results with incorporating the wind power and static VAR compensator devices illustrate the effectiveness and performances of the proposed algorithm compared to the ant lion optimizer algorithm in terms of convergence to the global optimal solution.
{"title":"Slime Mould Algorithm for Practical Optimal Power Flow Solutions Incorporating Stochastic Wind Power and Static VAR Compensator Device","authors":"R. Kouadri, L. Slimani, T. Bouktir","doi":"10.20998/2074-272x.2020.6.07","DOIUrl":"https://doi.org/10.20998/2074-272x.2020.6.07","url":null,"abstract":"Purpose. This paper proposes the application procedure of a new metaheuristic technique in a practical electrical power system to solve optimal power flow problems, this technique namely the slime mould algorithm (SMA) which is inspired by the swarming behavior and morphology of slime mould in nature. This study aims to test and verify the effectiveness of the proposed algorithm to get good solutions for optimal power flow problems by incorporating stochastic wind power generation and static VAR compensators devices. In this context, different cases are considered in order to minimize the total generation cost, reduction of active power losses as well as improving voltage profile. Methodology. The objective function of our problem is considered to be the minimum the total costs of conventional power generation and stochastic wind power generation with satisfying the power system constraints. The stochastic wind power function considers the penalty cost due to the underestimation and the reserve cost due to the overestimation of available wind power. In this work, the function of Weibull probability density is used to model and characterize the distributions of wind speed. Practical value. The proposed algorithm was examined on the IEEE-30 bus system and a large Algerian electrical test system with 114 buses. In the cases with the objective is to minimize the conventional power generation, the achieved results in both of the testing power systems showed that the slime mould algorithm performs better than other existing optimization techniques. Additionally, the achieved results with incorporating the wind power and static VAR compensator devices illustrate the effectiveness and performances of the proposed algorithm compared to the ant lion optimizer algorithm in terms of convergence to the global optimal solution.<br>","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2020-12-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120827037","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Electricity has become the most sought after amenity for all of us. Gone are the days when electricity would be only limited to cities. It is now reaching to every distant parts of the world. So we have now a complex network of power system. This power is being carried by the transmission lines. These lines travel very long distances so while carrying power, fault occurring is natural. This fault damages many vital electrical equipment like transformer, generator, and transmission lines. For the uninterrupted power supply we need to prevent these faults. So we need to detect faults within the shortest possible time. Microprocessors and microcontroller based systems used for these fault detection have been advancing rapidly.
In our project we have designed a system which consists of two inverters. These inverters can be provided with power supply either directly through 3 phase supply or through a step down transformer. Usually the inverter provides uninterrupted supply to the system there are also cases where the inverter shuts down due to unidentified faults. During this time the secondary inverter connected will automatically get connected and helps to run the system as it did before.
{"title":"Fault Analysis in Multi Inverter","authors":"A. Devi, S. Monisha, S. Vasavi","doi":"10.2139/ssrn.3733403","DOIUrl":"https://doi.org/10.2139/ssrn.3733403","url":null,"abstract":"Electricity has become the most sought after amenity for all of us. Gone are the days when electricity would be only limited to cities. It is now reaching to every distant parts of the world. So we have now a complex network of power system. This power is being carried by the transmission lines. These lines travel very long distances so while carrying power, fault occurring is natural. This fault damages many vital electrical equipment like transformer, generator, and transmission lines. For the uninterrupted power supply we need to prevent these faults. So we need to detect faults within the shortest possible time. Microprocessors and microcontroller based systems used for these fault detection have been advancing rapidly. <br><br>In our project we have designed a system which consists of two inverters. These inverters can be provided with power supply either directly through 3 phase supply or through a step down transformer. Usually the inverter provides uninterrupted supply to the system there are also cases where the inverter shuts down due to unidentified faults. During this time the secondary inverter connected will automatically get connected and helps to run the system as it did before.","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2020-11-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130048919","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
E. Baida, B. Klymenko, S. V. Vyrovets, M. Pantelyat, M. Clemens
Introduction: Currently, for switching medium voltage circuits, vacuum circuit breakers are widely used, which have good arcing properties and high breaking capacity. One of the problems of creating the drive mechanism of such apparatus is the need to ensure the absence of contact welding when a through current of a short circuit of a given duration flows through them, which is achieved due to a certain amount of contact pressure. One of the problems arising in the design of circuit breakers is the need to fix the mechanism with a mechanical lock, which should hold the mechanism securely. This leads to significant specific mechanical loads, which in turn reduces the reliability of the circuit breaker. One way to solve these problems is to create a drive based on monostable or bistable electromagnetic actuators with highly coercive permanent magnets, which provide reliable fixation of the position of the contacts.
Purpose: Investigation of the improved design of a bistable electromagnetic actuator based on permanent magnets of a medium voltage vacuum circuit breaker. Methods. Theoretical and experimental research and comparative analysis of existing and developed electromagnetic actuators.
Conclusions: A new design of an electromagnetic bistable actuator with reduced overall dimensions is developed and tested. The electromechanical characteristics of the actuator correspond to the technical specifications, which is confirmed by both theoretical and experimental studies. The proposed actuator can be used as a drive mechanism for medium voltage vacuum circuit breakers.
{"title":"Investigations of the Dynamics of a Bistable Electromagnet with Improved Characteristics for Medium Voltage Vacuum Circuit Breakers","authors":"E. Baida, B. Klymenko, S. V. Vyrovets, M. Pantelyat, M. Clemens","doi":"10.2139/ssrn.3819290","DOIUrl":"https://doi.org/10.2139/ssrn.3819290","url":null,"abstract":"Introduction: Currently, for switching medium voltage circuits, vacuum circuit breakers are widely used, which have good arcing properties and high breaking capacity. One of the problems of creating the drive mechanism of such apparatus is the need to ensure the absence of contact welding when a through current of a short circuit of a given duration flows through them, which is achieved due to a certain amount of contact pressure. One of the problems arising in the design of circuit breakers is the need to fix the mechanism with a mechanical lock, which should hold the mechanism securely. This leads to significant specific mechanical loads, which in turn reduces the reliability of the circuit breaker. One way to solve these problems is to create a drive based on monostable or bistable electromagnetic actuators with highly coercive permanent magnets, which provide reliable fixation of the position of the contacts. <br><br>Purpose: Investigation of the improved design of a bistable electromagnetic actuator based on permanent magnets of a medium voltage vacuum circuit breaker. Methods. Theoretical and experimental research and comparative analysis of existing and developed electromagnetic actuators. <br><br>Conclusions: A new design of an electromagnetic bistable actuator with reduced overall dimensions is developed and tested. The electromechanical characteristics of the actuator correspond to the technical specifications, which is confirmed by both theoretical and experimental studies. The proposed actuator can be used as a drive mechanism for medium voltage vacuum circuit breakers.<br>","PeriodicalId":332912,"journal":{"name":"EngRN: Power Engineering (Topic)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2020-06-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130613907","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：