Pub Date : 2023-06-05DOI: 10.37385/jaets.v4i2.1063
M. Obhuo, S. O. Okuma, D. S. Aziaka
Associated gas is a viable source of fuel for industrial gas turbines. Flaring of this fuel resource has not only resulted in environmental pollution and deterioration but also huge energy and economic loss. TURBOMATCH, a Cranfield University performance simulation software was used in modeling a hypothetical but realistic 296MW reheat gas turbine engine.The study was carried out using one clean fleet and three degraded fleets – the optimistic, medium, and pessimistic. Optimization of the fleet compositions and thermal efficiencies were achieved using Genetic algorithm. Detailed operations and maintenance costs analysis for the various fleets were carried out. .Results from the optimization show the optimized fleet compositions, from the various fleets and their turbine entry temperatures for 20 years life span of the project. the result from the 11th to the 20th year of the project, only one unit of engine was left due to engine divestment. Results of the optimized efficiencies for all the fleets show a gradual reduction in optimized efficiencies over the years of the project. Similarly, for all the scenarios considered, from the 11th to the 20th year of the project, with only one unit of engine left, the optimized efficiency trend is observed to be Clean > Optimistic > Medium > Pessimistic.Results from the fleets operations and maintenance costs show that the clean, optimistic, medium, and pessimistic degraded fleets have total operations and maintenance costs to be 1.224, 1.242, 1.265, and 1.297 billion US dollars respectively. Engine degradation resulted to 1.4%, 3.3%, and 5.9% increase in the operations and maintenance costs of the optimistic, medium, and pessimistic degraded fleets respectively.The results, approach and methodology presented in this paper would be a very useful decision-making tool for investors and governments who would want to invest in the economic utilization of associated gas using gas turbines.
{"title":"The Impact of Compressor Degradation on The Optimized Fleet Compositions, Optimized Thermal Efficiencies, and The Operations & Maintenance Cost of Fleets of a Reheat Engine Running on Associated Gas Fuel","authors":"M. Obhuo, S. O. Okuma, D. S. Aziaka","doi":"10.37385/jaets.v4i2.1063","DOIUrl":"https://doi.org/10.37385/jaets.v4i2.1063","url":null,"abstract":"Associated gas is a viable source of fuel for industrial gas turbines. Flaring of this fuel resource has not only resulted in environmental pollution and deterioration but also huge energy and economic loss. TURBOMATCH, a Cranfield University performance simulation software was used in modeling a hypothetical but realistic 296MW reheat gas turbine engine.The study was carried out using one clean fleet and three degraded fleets – the optimistic, medium, and pessimistic. Optimization of the fleet compositions and thermal efficiencies were achieved using Genetic algorithm. Detailed operations and maintenance costs analysis for the various fleets were carried out. .Results from the optimization show the optimized fleet compositions, from the various fleets and their turbine entry temperatures for 20 years life span of the project. the result from the 11th to the 20th year of the project, only one unit of engine was left due to engine divestment. Results of the optimized efficiencies for all the fleets show a gradual reduction in optimized efficiencies over the years of the project. Similarly, for all the scenarios considered, from the 11th to the 20th year of the project, with only one unit of engine left, the optimized efficiency trend is observed to be Clean > Optimistic > Medium > Pessimistic.Results from the fleets operations and maintenance costs show that the clean, optimistic, medium, and pessimistic degraded fleets have total operations and maintenance costs to be 1.224, 1.242, 1.265, and 1.297 billion US dollars respectively. Engine degradation resulted to 1.4%, 3.3%, and 5.9% increase in the operations and maintenance costs of the optimistic, medium, and pessimistic degraded fleets respectively.The results, approach and methodology presented in this paper would be a very useful decision-making tool for investors and governments who would want to invest in the economic utilization of associated gas using gas turbines.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48328373","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Joseph Nyumutsu, A. Agyei-Agyemang, P. Y. Andoh, P. O. Tawiah, Benjamin Atribawuni Asaaga
In this study, biodegradable materials that could be utilized to reduce noise were examined. Sound absorption test was conducted with an impedance tube. Sawdust, coconut fiber, and expansive clay were used to create test samples. Noise reduction coefficient results for sawdust and expansive clay mixture ranged from 0.24 to 0.62. A mixture of coconut fiber and expansive clay recorded in noise reduction coefficient between 0.31 and 0.58. Coconut fiber mixed with expansive clay recorded noise reduction coefficient ranging from 0.31 to 0.58. The study findings suggests that these materials have good acoustic properties and can therefore be used as alternative noise reduction materials. These findings have important implications in reducing environmental pollution if adopted in the development of noise reducing materials.
{"title":"The Potential of Sawdust and Coconut Fiber as Sound Reduction Materials","authors":"Joseph Nyumutsu, A. Agyei-Agyemang, P. Y. Andoh, P. O. Tawiah, Benjamin Atribawuni Asaaga","doi":"10.37385/jaets.v4i2.624","DOIUrl":"https://doi.org/10.37385/jaets.v4i2.624","url":null,"abstract":"In this study, biodegradable materials that could be utilized to reduce noise were examined. Sound absorption test was conducted with an impedance tube. Sawdust, coconut fiber, and expansive clay were used to create test samples. Noise reduction coefficient results for sawdust and expansive clay mixture ranged from 0.24 to 0.62. A mixture of coconut fiber and expansive clay recorded in noise reduction coefficient between 0.31 and 0.58. Coconut fiber mixed with expansive clay recorded noise reduction coefficient ranging from 0.31 to 0.58. The study findings suggests that these materials have good acoustic properties and can therefore be used as alternative noise reduction materials. These findings have important implications in reducing environmental pollution if adopted in the development of noise reducing materials.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41970120","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-06-05DOI: 10.37385/jaets.v4i2.1539
M. Kristiawan, I. A. Oka, Een Yayah Haenilah, W. Wachidi, Ediansyah Ediansyah, Iwan Aprianto, Ahmad Zulinto, David D. Perrodin, Hendri Budi Utama
There are many teachers do not have skill on operating computer specially to make materials interesting for their students. This study was to improve the technological skills of students, particularly those who teach online. In this study, we attempted to determine how students may utilize YouTube as a medium to strengthen their technological skills. This study was carried out by us with the help of students who took the Education Management Course as the subject of study. The data collection technique used in this study was observation sheets, which were then used to answer the formulation of how the student responses related to the video-making project in the Education Management Course uploaded on YouTube; then, to answer the formulation of how the student’s activities on Education Management, we asked students to complete their video projects and upload them on YouTube; and to answer the formulation of whether the use of YouTube can develop technological skills of students, observation sheets was used. This study concludes that respondents are able to edit and upload video about Education Management on YouTube.
{"title":"Youtube For Developing Technological Skill","authors":"M. Kristiawan, I. A. Oka, Een Yayah Haenilah, W. Wachidi, Ediansyah Ediansyah, Iwan Aprianto, Ahmad Zulinto, David D. Perrodin, Hendri Budi Utama","doi":"10.37385/jaets.v4i2.1539","DOIUrl":"https://doi.org/10.37385/jaets.v4i2.1539","url":null,"abstract":"There are many teachers do not have skill on operating computer specially to make materials interesting for their students. This study was to improve the technological skills of students, particularly those who teach online. In this study, we attempted to determine how students may utilize YouTube as a medium to strengthen their technological skills. This study was carried out by us with the help of students who took the Education Management Course as the subject of study. The data collection technique used in this study was observation sheets, which were then used to answer the formulation of how the student responses related to the video-making project in the Education Management Course uploaded on YouTube; then, to answer the formulation of how the student’s activities on Education Management, we asked students to complete their video projects and upload them on YouTube; and to answer the formulation of whether the use of YouTube can develop technological skills of students, observation sheets was used. This study concludes that respondents are able to edit and upload video about Education Management on YouTube.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48867780","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-06-05DOI: 10.37385/jaets.v4i2.2040
K. Armas, Engr. Gina Lorenzo, Catherine B. Dela Cruz
This study aimed to explore the financial, socio-economic, and environmental benefits of sustainable onion production using vertical farming and hydroponic systems, and to identify key factors affecting the viability of these business models. Data were collected through a survey of onion farmers and producers in the Philippines, and analyzed using descriptive and inferential statistics. Results showed that sustainable onion production using vertical farming and hydroponic systems has the potential to generate higher income for farmers, increase employment opportunities, improve food security, enhance market competitiveness, and promote environmental sustainability. Key financial factors affecting viability included production costs, market prices, yield, labor costs, energy costs, capital costs, financing costs, taxes and regulatory costs, and maintenance and repair costs. Recommendations for optimizing financial viability include reducing production costs, diversifying income streams, and improving market competitiveness. Overall, this study suggests that sustainable onion production using vertical farming and hydroponic systems is a viable and promising approach to achieving socio-economic and environmental sustainability in the agricultural sector.
{"title":"Financial Viability of Business Models For Engineered Vertical Hydroponics Systems For Sustainable Onion Production in The Philippines","authors":"K. Armas, Engr. Gina Lorenzo, Catherine B. Dela Cruz","doi":"10.37385/jaets.v4i2.2040","DOIUrl":"https://doi.org/10.37385/jaets.v4i2.2040","url":null,"abstract":"This study aimed to explore the financial, socio-economic, and environmental benefits of sustainable onion production using vertical farming and hydroponic systems, and to identify key factors affecting the viability of these business models. Data were collected through a survey of onion farmers and producers in the Philippines, and analyzed using descriptive and inferential statistics. Results showed that sustainable onion production using vertical farming and hydroponic systems has the potential to generate higher income for farmers, increase employment opportunities, improve food security, enhance market competitiveness, and promote environmental sustainability. Key financial factors affecting viability included production costs, market prices, yield, labor costs, energy costs, capital costs, financing costs, taxes and regulatory costs, and maintenance and repair costs. Recommendations for optimizing financial viability include reducing production costs, diversifying income streams, and improving market competitiveness. Overall, this study suggests that sustainable onion production using vertical farming and hydroponic systems is a viable and promising approach to achieving socio-economic and environmental sustainability in the agricultural sector.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47955468","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-06-05DOI: 10.37385/jaets.v4i2.1682
Saikat Gochhait, D. Sharma
Forecasting load is an integral part of the planning, operation, and control of power systems. This paper is part of a research effort aimed at developing better energy demand forecasting models for load dispatch centers (LDCs) in Indian states as part of an ambitious project utilizing artificial intelligence-based load forecasting models. In this paper, we present a half hourly load forecasting method for the energy management system of the project that will be used at 33 /11 kV and 0.415 kV substations with good accuracy. The paper uses the half-hourly load consumption dataset collected from MSEDCL for Maharashtra from July 1, 2020 through August 31, 2022. This paper evaluates 24 regression model-based half hourly based load forecasting algorithms for ALE PHATA load based on the load consumption dataset and the collected meteorological dataset. The 24 models in MATLAB Regression belong to five types of regression models: Linear Regression, Regression Trees, Support Vector Machines (SVM), Gaussian Process Regression (GPR), Ensemble of Trees, and Neural Networks. As a consequence of their nonparametric kernel-based probabilistic nature, the GPR family of models demonstrates the best load forecasting performance. Least squares estimation was used to determine the regression coefficients. There is a direct correlation between load in an electrical power system and temperature, due point, and seasons, as well as a correlation between load and previous load consumption. Therefore, the input variables are Wet Bulb Temperature at 2 Meters (C), Dew/Frost Point at 2 Meters (C), Temperature at 2 Meters (C), Relative Humidity at 2 Meters (%), Specific Humidity at 2 Meters (g/kg) and Wind Speed at 10 Meters (m/s). The mean absolute percentage error and the R squared are used to validate or verify the accuracy of the model, which is shown in the results section. Based on this study, two GPR models are recommended for load forecasting, the Rational Quadratic GPR and the Exponential GPR and Exponential GPR as final model.
{"title":"Regression Model-Based Short-Term Load Forecasting for Load Despatch Centre","authors":"Saikat Gochhait, D. Sharma","doi":"10.37385/jaets.v4i2.1682","DOIUrl":"https://doi.org/10.37385/jaets.v4i2.1682","url":null,"abstract":"Forecasting load is an integral part of the planning, operation, and control of power systems. This paper is part of a research effort aimed at developing better energy demand forecasting models for load dispatch centers (LDCs) in Indian states as part of an ambitious project utilizing artificial intelligence-based load forecasting models. In this paper, we present a half hourly load forecasting method for the energy management system of the project that will be used at 33 /11 kV and 0.415 kV substations with good accuracy. The paper uses the half-hourly load consumption dataset collected from MSEDCL for Maharashtra from July 1, 2020 through August 31, 2022. This paper evaluates 24 regression model-based half hourly based load forecasting algorithms for ALE PHATA load based on the load consumption dataset and the collected meteorological dataset. The 24 models in MATLAB Regression belong to five types of regression models: Linear Regression, Regression Trees, Support Vector Machines (SVM), Gaussian Process Regression (GPR), Ensemble of Trees, and Neural Networks. As a consequence of their nonparametric kernel-based probabilistic nature, the GPR family of models demonstrates the best load forecasting performance. Least squares estimation was used to determine the regression coefficients. There is a direct correlation between load in an electrical power system and temperature, due point, and seasons, as well as a correlation between load and previous load consumption. Therefore, the input variables are Wet Bulb Temperature at 2 Meters (C), Dew/Frost Point at 2 Meters (C), Temperature at 2 Meters (C), Relative Humidity at 2 Meters (%), Specific Humidity at 2 Meters (g/kg) and Wind Speed at 10 Meters (m/s). The mean absolute percentage error and the R squared are used to validate or verify the accuracy of the model, which is shown in the results section. Based on this study, two GPR models are recommended for load forecasting, the Rational Quadratic GPR and the Exponential GPR and Exponential GPR as final model.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43475616","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-06-05DOI: 10.37385/jaets.v4i2.1449
Mahsusi Mahsusi, S. Hudaa, N. Nuryani, A. Bahtiar, Makyun Subuki
This study aimed to look at madrasah's efforts in developing a learning system through "digital learning." This was done by examining the digital learning system implemented at MAN in terms of its advantages and disadvantages. The method used in this research was descriptive qualitative, with the data collection techniques employed were direct observation and interviews. Meanwhile, the research location is four MAN in Jakarta and Tangerang area, including. The four madrasahs that became the research locations were MAN Insan Cendekia Serpong (South Tangerang), MAN 1 Tangerang, MAN 4 Jakarta, and MAN 13 Jakarta. The researcher conducted interviews with school parties, namely teachers and principals. The results showed that three madrasahs have well-managed e-learning systems. In this case, they are MAN IC Serpong, MAN 1 Tangerang, and MAN 4 Jakarta. The e-learning system used by each madrasah is E-Learning Madrasah which can be accessed using the web and applications from Play Store. Meanwhile, MAN 13 Jakarta still needs to have its e-learning system and use standard features such as zoom, G-meet, etc. Basically. Madrasahs such as MAN IC Serpong, MAN 4 Jakarta, and MAN 1 Tangerang have registered to utilize the digital learning platform with all the features provided. Meanwhile, MAN 13 Jakarta has yet to register, so it cannot utilize the features contained in the digital learning platform. This research implies that madrasahs have innovated well in digital learning implementation so that learning during the pandemic can run well and smoothly. This research further contributes theoretically and practically to the world of education, especially for madrasas regarded as "second-class" schools. In general, this research contributes to the development of the world of digital learning by providing a valuable platform through the various features provided
这项研究旨在考察伊斯兰学校通过“数字学习”开发学习系统的努力。这是通过检查在MAN实施的数字学习系统的优点和缺点来完成的。本研究采用描述性定性方法，数据收集采用直接观察和访谈方法。同时，研究地点是雅加达和丹格朗地区的四个MAN，包括。成为研究地点的四所伊斯兰学校是MAN Insan Cendekia Serpong(南丹格朗)、MAN 1 Tangerang、MAN 4 Jakarta和MAN 13 Jakarta。研究者对学校当事人，即教师和校长进行了访谈。结果显示，三所伊斯兰学校拥有管理良好的电子学习系统。在这种情况下，他们是MAN i Serpong, MAN 1 Tangerang和MAN 4 Jakarta。每个伊斯兰学校使用的电子学习系统是电子学习伊斯兰学校，可以使用网络和Play商店的应用程序访问。同时，MAN 13 Jakarta仍然需要拥有自己的电子学习系统，并使用zoom、G-meet等标准功能。基本上。manic Serpong, man4 Jakarta和man1 Tangerang等伊斯兰学校已经注册使用具有所有功能的数字学习平台。与此同时，MAN 13雅加达尚未注册，因此无法利用数字学习平台所包含的功能。这项研究表明，伊斯兰学校在数字化学习实施方面进行了很好的创新，因此大流行期间的学习可以顺利进行。这项研究在理论和实践上进一步为教育界，特别是被视为“二等”学校的伊斯兰学校做出了贡献。总的来说，本研究通过提供的各种功能提供了一个有价值的平台，有助于数字学习世界的发展
{"title":"Integrated Application-Based Digital Learning Technology in Successful Learning Activities During the Pandemic","authors":"Mahsusi Mahsusi, S. Hudaa, N. Nuryani, A. Bahtiar, Makyun Subuki","doi":"10.37385/jaets.v4i2.1449","DOIUrl":"https://doi.org/10.37385/jaets.v4i2.1449","url":null,"abstract":"This study aimed to look at madrasah's efforts in developing a learning system through \"digital learning.\" This was done by examining the digital learning system implemented at MAN in terms of its advantages and disadvantages. The method used in this research was descriptive qualitative, with the data collection techniques employed were direct observation and interviews. Meanwhile, the research location is four MAN in Jakarta and Tangerang area, including. The four madrasahs that became the research locations were MAN Insan Cendekia Serpong (South Tangerang), MAN 1 Tangerang, MAN 4 Jakarta, and MAN 13 Jakarta. The researcher conducted interviews with school parties, namely teachers and principals. The results showed that three madrasahs have well-managed e-learning systems. In this case, they are MAN IC Serpong, MAN 1 Tangerang, and MAN 4 Jakarta. The e-learning system used by each madrasah is E-Learning Madrasah which can be accessed using the web and applications from Play Store. Meanwhile, MAN 13 Jakarta still needs to have its e-learning system and use standard features such as zoom, G-meet, etc. Basically. Madrasahs such as MAN IC Serpong, MAN 4 Jakarta, and MAN 1 Tangerang have registered to utilize the digital learning platform with all the features provided. Meanwhile, MAN 13 Jakarta has yet to register, so it cannot utilize the features contained in the digital learning platform. This research implies that madrasahs have innovated well in digital learning implementation so that learning during the pandemic can run well and smoothly. This research further contributes theoretically and practically to the world of education, especially for madrasas regarded as \"second-class\" schools. In general, this research contributes to the development of the world of digital learning by providing a valuable platform through the various features provided","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43824158","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-06-05DOI: 10.37385/jaets.v4i2.1701
Nindyo Cahyo Kresnanto, Wika Harisa Putri
The main problem of transportation is the very high growth of vehicles causing congestion, resulting in various derivative impacts such as pollution, fuel waste, time value, and other environmental problems. This problem can be solved by Transportation Demand Management (TDM). TDM is a combination of various strategies, which strategy should be chosen whose priority depends on the conditions of each region. This research was conducted in a medium-scale city by determining the priority of TDM using the Analytical Hierarchy Process (AHP) tool. The final result of the judgment is the priority weight of the TDM strategy that will be applied with a CR value of < 10%, namely the pull strategy. This strategy is represented by improving public transport services and infrastructure (especially the integration of public transport services). This study shows that the strategy group with a high AHP Consensus Index (ACI) score means a high consensus among experts.
{"title":"Transport Demand Management Strategy Priority Assessment Based on Expert Judgment","authors":"Nindyo Cahyo Kresnanto, Wika Harisa Putri","doi":"10.37385/jaets.v4i2.1701","DOIUrl":"https://doi.org/10.37385/jaets.v4i2.1701","url":null,"abstract":"The main problem of transportation is the very high growth of vehicles causing congestion, resulting in various derivative impacts such as pollution, fuel waste, time value, and other environmental problems. This problem can be solved by Transportation Demand Management (TDM). TDM is a combination of various strategies, which strategy should be chosen whose priority depends on the conditions of each region. This research was conducted in a medium-scale city by determining the priority of TDM using the Analytical Hierarchy Process (AHP) tool. The final result of the judgment is the priority weight of the TDM strategy that will be applied with a CR value of < 10%, namely the pull strategy. This strategy is represented by improving public transport services and infrastructure (especially the integration of public transport services). This study shows that the strategy group with a high AHP Consensus Index (ACI) score means a high consensus among experts.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135703256","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-30DOI: 10.37385/jaets.v4i1.1426
M. L. Hamzah, Lovi Anisa Hultari, A. A. Purwati, N. Nazaruddin
technology, namely the use of e-Library as an online catalog facility to directly access collections of books, theses or other collections contained in the library. This research is based on the fact that users feel dissatisfied with the services provided by the e-Library, such as collections and collection information that do not meet user needs. The purpose of this study was to measure the level of satisfaction of e-Library users using the End User Computing Satisfaction method with five perspectives namely Content, Accuracy, Format, Ease of Use, and Timeliness. The Impotance Performance Analysis (IPA) method is used to determine which attributes are important to be improved and which need to be reduced to be interpreted in the form of a matrix. This study also calculates the value of Customer Satisfaction Index (CSI) to determine the overall level of user satisfaction. The results of this study show that all attributes in terms of Importance are in a very important category, while the Performance attributes are in the satisfied category, namely the Content and Format variables. Variables with quite satisfied categories on Accuracy, Ease of Use and Timeliness variables. The results of the IPA matrix obtained 6 attributes with the most improvement in the Accuracy variable, the attribute with the most good performance in the Content variable. Overall, the CSI value is 60.34%, which means that users are quite satisfied with the performance provided by the e-Library
{"title":"Analysis of E-Library Based on Level of User Satisfaction Using EUCS and IPA Methods","authors":"M. L. Hamzah, Lovi Anisa Hultari, A. A. Purwati, N. Nazaruddin","doi":"10.37385/jaets.v4i1.1426","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1426","url":null,"abstract":"technology, namely the use of e-Library as an online catalog facility to directly access collections of books, theses or other collections contained in the library. This research is based on the fact that users feel dissatisfied with the services provided by the e-Library, such as collections and collection information that do not meet user needs. The purpose of this study was to measure the level of satisfaction of e-Library users using the End User Computing Satisfaction method with five perspectives namely Content, Accuracy, Format, Ease of Use, and Timeliness. The Impotance Performance Analysis (IPA) method is used to determine which attributes are important to be improved and which need to be reduced to be interpreted in the form of a matrix. This study also calculates the value of Customer Satisfaction Index (CSI) to determine the overall level of user satisfaction. The results of this study show that all attributes in terms of Importance are in a very important category, while the Performance attributes are in the satisfied category, namely the Content and Format variables. Variables with quite satisfied categories on Accuracy, Ease of Use and Timeliness variables. The results of the IPA matrix obtained 6 attributes with the most improvement in the Accuracy variable, the attribute with the most good performance in the Content variable. Overall, the CSI value is 60.34%, which means that users are quite satisfied with the performance provided by the e-Library","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46128228","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-30DOI: 10.37385/jaets.v4i1.1434
A. A. Purwati, M. L. Hamzah
Digital technology is currently highly developed in all fields. The development of this technology certainly has a big impact on the world of business and industry. This study tries to prove the effect of instrument readiness in developing technopreneurship abilities in students. The readiness instrument variables used are Capital Thourgh, Information and Social Network. The study was conducted on 150 students who have technology-based businesses (technopreneurs) as samples. The data analysis technique used is the structural equation model with the help of Smart PLS. The results showed that Capital Through did not have a significant effect on technopreneurship, but Information and Social Networks had a positive influence on technopreneurship. In addition, the Social Network is able to encourage a technopreneur to make it easier to obtain information related to business development.
{"title":"Instrument Readiness Analysis of Technology-Based Businesses","authors":"A. A. Purwati, M. L. Hamzah","doi":"10.37385/jaets.v4i1.1434","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1434","url":null,"abstract":"Digital technology is currently highly developed in all fields. The development of this technology certainly has a big impact on the world of business and industry. This study tries to prove the effect of instrument readiness in developing technopreneurship abilities in students. The readiness instrument variables used are Capital Thourgh, Information and Social Network. The study was conducted on 150 students who have technology-based businesses (technopreneurs) as samples. The data analysis technique used is the structural equation model with the help of Smart PLS. The results showed that Capital Through did not have a significant effect on technopreneurship, but Information and Social Networks had a positive influence on technopreneurship. In addition, the Social Network is able to encourage a technopreneur to make it easier to obtain information related to business development.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47434653","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In the current era of globalization, technology is advancing rapidly, and computers are one of the technologies which are one of the tools used to make it easier to find problems, of course, it is also supported by hardware, software and brainware. Mobile stores require an information system that supports and provides satisfactory service to buyers. For this reason, the author makes this final project regarding the program for selling cellphones at the cellphone store which currently does not use a computerized system. The system at the cellphone store usually still uses a manual system. Starting from recording sales notes to bookkeeping sales reports that are still recorded in the books. This can allow for errors in recording, ineffectiveness and inefficient calculations in large numbers. And can cause inaccurate reports made. The use of the program is one solution to solving sales problems in the cellphone store. Therefore, with the use of a sales program, it is possible to further assist sales activities in the cellphone store.
{"title":"Sales Mobile Application Design in Handphone Store","authors":"Nanang Nuryadi, Bibit Sudarsono, Ayuni Asistyasari, Nuryanti Nuryanti","doi":"10.37385/jaets.v4i1.1371","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1371","url":null,"abstract":"In the current era of globalization, technology is advancing rapidly, and computers are one of the technologies which are one of the tools used to make it easier to find problems, of course, it is also supported by hardware, software and brainware. Mobile stores require an information system that supports and provides satisfactory service to buyers. For this reason, the author makes this final project regarding the program for selling cellphones at the cellphone store which currently does not use a computerized system. The system at the cellphone store usually still uses a manual system. Starting from recording sales notes to bookkeeping sales reports that are still recorded in the books. This can allow for errors in recording, ineffectiveness and inefficient calculations in large numbers. And can cause inaccurate reports made. The use of the program is one solution to solving sales problems in the cellphone store. Therefore, with the use of a sales program, it is possible to further assist sales activities in the cellphone store.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44860135","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：