Pub Date : 2022-12-15DOI: 10.37385/jaets.v4i1.1320
Mhd Azwar Taruna, M. Mulyono, Rika Susanti, S. Sutoyo
Long Term Evolution (LTE) has high-speed data access of 300 Mbps on the downlink and 75 Mbps on the uplink. The area of ??the Mandau site is located in the town of Duri-Bengkalis, Riau. In this study, a network optimization was carried out on one of the providers. From the results of the drive test conducted, a problem was found, namely throughput quality which was in very bad condition. Therefore, a network optimization simulation was carried out using the Electrical Tilt method in order to overcome the problem of unstable throughput conditions. Simulation of the application of this method is carried out using Software Atoll. The results obtained after optimization with the value on Jalan Obor 2 increased to 19,000 kbps (normal), on Jalan Obor 1 increased to 50,000 kbps (very good), on Jalan Bandes increased to 50,000 kbps (very good), on Jalan Swadaya increased to 50,000 kbps (very good) and on Jalan Hangtuah increased to 50,000 kbps (very good).
长期演进（LTE）在下行链路上具有300Mbps和在上行链路上具有75Mbps的高速数据接入。面积？？Mandau遗址位于廖内省的Duri Bengkalis镇。在本研究中，对其中一家供应商进行了网络优化。根据所进行的驾驶测试的结果，发现了一个问题，即吞吐量质量处于非常糟糕的状态。因此，为了克服吞吐量条件不稳定的问题，使用电倾斜方法进行了网络优化仿真。使用软件Atoll对该方法的应用进行了仿真。优化后获得的结果，在Jalan Obor 2上的值增加到19000 kbps（正常），在Jaland Obor 1上增加到50000 kbps（非常好），在贾兰Bandes上增加到50000kbps（非常好。
{"title":"LTE Optimization Using The Electrical Tilt Method At The Mandau Site","authors":"Mhd Azwar Taruna, M. Mulyono, Rika Susanti, S. Sutoyo","doi":"10.37385/jaets.v4i1.1320","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1320","url":null,"abstract":"Long Term Evolution (LTE) has high-speed data access of 300 Mbps on the downlink and 75 Mbps on the uplink. The area of ??the Mandau site is located in the town of Duri-Bengkalis, Riau. In this study, a network optimization was carried out on one of the providers. From the results of the drive test conducted, a problem was found, namely throughput quality which was in very bad condition. Therefore, a network optimization simulation was carried out using the Electrical Tilt method in order to overcome the problem of unstable throughput conditions. Simulation of the application of this method is carried out using Software Atoll. The results obtained after optimization with the value on Jalan Obor 2 increased to 19,000 kbps (normal), on Jalan Obor 1 increased to 50,000 kbps (very good), on Jalan Bandes increased to 50,000 kbps (very good), on Jalan Swadaya increased to 50,000 kbps (very good) and on Jalan Hangtuah increased to 50,000 kbps (very good).","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47717999","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-15DOI: 10.37385/jaets.v4i1.1287
S. Anisah, R. Fitri, Zuraidah Taro, Rian Farta Wijaya
Light bulb waste is categorized as non-organic waste which cannot be decomposed in nature and has the potential to damage the environment. Currently the production of light bulb waste reaches 4.50% of the total waste production per day. These conditions require a solution to reduce the amount of waste produced by light bulbs. This paper aims to discuss the recycling technology used for light bulb waste, so that the waste can be reused as recycled and environmentally friendly lighting lamps. The method used in this study refers to an environmentally friendly concept, namely, designing lighting lamps using waste light bulbs that are no longer used. The design product is designed exactly the same as the previous product from the manufacturer, then proceed with testing in the laboratory to determine the electrical parameters and the amount of lumens produced. From the results of the research conducted, it can be seen that the results of the design of recycled lighting lamps have a decrease in lumens value for CFL types by 7%, LED by 8%, the durability and lifespan of light bulbs are reduced by CFL types by 32%, LED types by 30%, the results of the design recycled
{"title":"Comparison of Lighting Efficiency (Led-CFL) based on Environmentally Friendly Technology","authors":"S. Anisah, R. Fitri, Zuraidah Taro, Rian Farta Wijaya","doi":"10.37385/jaets.v4i1.1287","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1287","url":null,"abstract":"Light bulb waste is categorized as non-organic waste which cannot be decomposed in nature and has the potential to damage the environment. Currently the production of light bulb waste reaches 4.50% of the total waste production per day. These conditions require a solution to reduce the amount of waste produced by light bulbs. This paper aims to discuss the recycling technology used for light bulb waste, so that the waste can be reused as recycled and environmentally friendly lighting lamps. The method used in this study refers to an environmentally friendly concept, namely, designing lighting lamps using waste light bulbs that are no longer used. The design product is designed exactly the same as the previous product from the manufacturer, then proceed with testing in the laboratory to determine the electrical parameters and the amount of lumens produced. From the results of the research conducted, it can be seen that the results of the design of recycled lighting lamps have a decrease in lumens value for CFL types by 7%, LED by 8%, the durability and lifespan of light bulbs are reduced by CFL types by 32%, LED types by 30%, the results of the design recycled","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43898777","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-14DOI: 10.37385/jaets.v4i1.1343
Rika Perdana Sari, Silvana Rasio Henim
A tourist destination is a geographical area within one or more administrative areas in which there are tourist attractions, public facilities, tourism facilities, accessibility, and communities that are interrelated and complement the realization of tourism. A website is a form of communication media that can provide certain information, which can be accessed by many people anytime and anywhere. The Regional Government (pemda) of Pekanbaru City has provided tourism information services in the form of tourist destinations and tourism activities on the website. Based on the results of preliminary observations made on the tourism website of the Pekanbaru City government, it was found that the tourism information provided was not up to date, and there were still many tourist objects in Pekanbaru that had not been published, so the information delivery process was not optimal and ineffective. The effectiveness of using the website must pay attention to usability of its use. Usability is a quality level of a system that is easy to learn, easy to use, and encourages users to use the system as a tool in completing tasks. Usability can be measured based on the quality of the user experience when interacting with the system operated by the user himself. Usability measurement on this tourism website is carried out using the System Usability Scale (SUS) measurement tool. Based on the measurement results using SUS, a score of 65.87 was obtained, where 10 of the statement items were declared valid and reliable. The score obtained shows that in terms of user satisfaction, it is stated to be included in the Marginal High category, predicate D with the adjective range Ok. This shows that the user's subjective assessment illustrates that the Pekanbaru City government's tourism website is less effective, efficient, and satisfying for users.
{"title":"Measurement and Analysis of Tourism Website User Experience Using Usability Techniques","authors":"Rika Perdana Sari, Silvana Rasio Henim","doi":"10.37385/jaets.v4i1.1343","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1343","url":null,"abstract":"A tourist destination is a geographical area within one or more administrative areas in which there are tourist attractions, public facilities, tourism facilities, accessibility, and communities that are interrelated and complement the realization of tourism. A website is a form of communication media that can provide certain information, which can be accessed by many people anytime and anywhere. The Regional Government (pemda) of Pekanbaru City has provided tourism information services in the form of tourist destinations and tourism activities on the website. Based on the results of preliminary observations made on the tourism website of the Pekanbaru City government, it was found that the tourism information provided was not up to date, and there were still many tourist objects in Pekanbaru that had not been published, so the information delivery process was not optimal and ineffective. The effectiveness of using the website must pay attention to usability of its use. Usability is a quality level of a system that is easy to learn, easy to use, and encourages users to use the system as a tool in completing tasks. Usability can be measured based on the quality of the user experience when interacting with the system operated by the user himself. Usability measurement on this tourism website is carried out using the System Usability Scale (SUS) measurement tool. Based on the measurement results using SUS, a score of 65.87 was obtained, where 10 of the statement items were declared valid and reliable. The score obtained shows that in terms of user satisfaction, it is stated to be included in the Marginal High category, predicate D with the adjective range Ok. This shows that the user's subjective assessment illustrates that the Pekanbaru City government's tourism website is less effective, efficient, and satisfying for users.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43960809","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-14DOI: 10.37385/jaets.v4i1.1340
Yuliska Yuliska, Nina Fadillah Najwa, K. U. Syaliman
The Covid-19 pandemic has hit Indonesia for more than 2 years. To overcome Covid-19, Indonesian government implemented a vaccination program with a target of 70% of the population being vaccinated. However, the recorded population that has been vaccinated to reduce the risk of being exposed to Covid-19 is still low. Several studies have stated that information and invitations to vaccines through mass media are considered insufficient to convince the population to vaccinate. Residents who are still unsure and do not even want to vaccinate need really comprehensive information from experts. To answer this problem, a chatbot that can replace experts in explaining everything related to vaccines can be one solution. This is evidenced by a study which states that the interaction between people who have not been vaccinated with a chatbot that explains about vaccination can reduce the level of doubt of the population about the vaccine by up to 20%. The purpose of this research is to build a chatbot using deep learning technique. Meanwhile, the deep learning technique used to build a conversational chatbot is the Multilayer Perceptron Network (MLP). Based on the result of our study, our chatbot can answer 83% questions correctly out of 30 questions.
{"title":"The Implementation of Deep Learning Techniques in Developing Conversational Chatbot as The Source of Vaccination Information","authors":"Yuliska Yuliska, Nina Fadillah Najwa, K. U. Syaliman","doi":"10.37385/jaets.v4i1.1340","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1340","url":null,"abstract":"The Covid-19 pandemic has hit Indonesia for more than 2 years. To overcome Covid-19, Indonesian government implemented a vaccination program with a target of 70% of the population being vaccinated. However, the recorded population that has been vaccinated to reduce the risk of being exposed to Covid-19 is still low. Several studies have stated that information and invitations to vaccines through mass media are considered insufficient to convince the population to vaccinate. Residents who are still unsure and do not even want to vaccinate need really comprehensive information from experts. To answer this problem, a chatbot that can replace experts in explaining everything related to vaccines can be one solution. This is evidenced by a study which states that the interaction between people who have not been vaccinated with a chatbot that explains about vaccination can reduce the level of doubt of the population about the vaccine by up to 20%. The purpose of this research is to build a chatbot using deep learning technique. Meanwhile, the deep learning technique used to build a conversational chatbot is the Multilayer Perceptron Network (MLP). Based on the result of our study, our chatbot can answer 83% questions correctly out of 30 questions.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47779869","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-14DOI: 10.37385/jaets.v4i1.1333
Ryan Oktapratama, Dylmoon Hidayat
One of the adaptations that are being carried out in schools in Indonesia in the post-pandemic era is the implementation of online learning models and mixed learning. However, the challenge that arises is that for teachers today more effort is needed to create activities that can be used in this new situation. One application that can accommodate the need to store various types of teaching materials from all teachers in various schools is a web-based application such as Glide. The purpose of this study is to analyze whether the Glide web-based application can be applied as a learning medium and a means of sharing knowledge for teachers in the post-pandemic period. The research method used is qualitative with the development of problem solving methods of linking. The results showed that Glide can be used as a learning medium and a means of sharing knowledge for teachers in the post-pandemic period with some notes. First, the school or teacher must design it so that the contents of the application focus on the collection of teaching materials. Second, the manipulative ability of learning media cannot be obtained through the Glide application. Third, schools need to develop plans so that the implementation of this application can run effectively.
{"title":"Model of Web-Based Application “Glide” As Learning Media and Knowledge Sharing Tool of Teachers in Post-Pandemic Era","authors":"Ryan Oktapratama, Dylmoon Hidayat","doi":"10.37385/jaets.v4i1.1333","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1333","url":null,"abstract":"One of the adaptations that are being carried out in schools in Indonesia in the post-pandemic era is the implementation of online learning models and mixed learning. However, the challenge that arises is that for teachers today more effort is needed to create activities that can be used in this new situation. One application that can accommodate the need to store various types of teaching materials from all teachers in various schools is a web-based application such as Glide. The purpose of this study is to analyze whether the Glide web-based application can be applied as a learning medium and a means of sharing knowledge for teachers in the post-pandemic period. The research method used is qualitative with the development of problem solving methods of linking. The results showed that Glide can be used as a learning medium and a means of sharing knowledge for teachers in the post-pandemic period with some notes. First, the school or teacher must design it so that the contents of the application focus on the collection of teaching materials. Second, the manipulative ability of learning media cannot be obtained through the Glide application. Third, schools need to develop plans so that the implementation of this application can run effectively.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45149898","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-14DOI: 10.37385/jaets.v4i1.1367
Irohito Nozomi, Febri Aldi, Rio Bayu Sentosa
Deep learning models are more often used in the medical field as a result of the rapid development of machine learning, graphics processing technologies, and accessibility of medical imaging data. The convolutional neural network (CNN)-based design, adopted by the medical imaging community to assist doctors in identifying the disease, has exacerbated this situation. This research uses a qualitative methodology. The information used in this study, which explores the ideas of deep learning and convolutional neural networks (CNN), taken from publications or papers on artificial intelligent (AI) Convolutional neural networks has been used in recent years for the analysis of medical image data. CNN's development of its machine learning roots is traced in this study. We also provide a brief mathematical description of CNN as well as the pre-processing process required for medical images before inserting them into CNN. Using CNN in many medical domains, including classification, segmentation, detection, and localization, we evaluate relevant research in the field of medical imaging analysis. It can be concluded that CNN's deep learning view of medical imaging is very helpful for medical parties in their work
{"title":"Views on Deep Learning for Medical Image Diagnosis","authors":"Irohito Nozomi, Febri Aldi, Rio Bayu Sentosa","doi":"10.37385/jaets.v4i1.1367","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1367","url":null,"abstract":"Deep learning models are more often used in the medical field as a result of the rapid development of machine learning, graphics processing technologies, and accessibility of medical imaging data. The convolutional neural network (CNN)-based design, adopted by the medical imaging community to assist doctors in identifying the disease, has exacerbated this situation. This research uses a qualitative methodology. The information used in this study, which explores the ideas of deep learning and convolutional neural networks (CNN), taken from publications or papers on artificial intelligent (AI) Convolutional neural networks has been used in recent years for the analysis of medical image data. CNN's development of its machine learning roots is traced in this study. We also provide a brief mathematical description of CNN as well as the pre-processing process required for medical images before inserting them into CNN. Using CNN in many medical domains, including classification, segmentation, detection, and localization, we evaluate relevant research in the field of medical imaging analysis. It can be concluded that CNN's deep learning view of medical imaging is very helpful for medical parties in their work","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45993696","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-14DOI: 10.37385/jaets.v4i1.1337
Enty Nur Hayati, M. R. Radyanto, Firman Ardiansyah Ekoanindiyo, Endro Prihastono
The SN Multi-Business Cooperative (KSU) was founded in 2011 in Semarang Regency. This cooperative operates in the storage of pure cow's milk with a total of around 300 milk farmers located around the cooperative. The problem that often arises is the dependency on receiving milk by the milk factory. Milk that has been sent to the dairy factory can be rejected by the milk factory for various reasons. In the field of marketing, KSU SN established a business entity with the name CV MSN which is located on Jalan Tirto Agung, Semarang. Product delivery logistics activities have so far been carried out with four-wheeled vehicles and using two-wheeled vehicles. To transport milk, each driver uses a bag or styrofoam which is used to transport milk products. Apart from being impractical, the transport process is messy, and the milk temperature cannot be maintained. To overcome this problem, milk transport boxes are designed to be able to transport milk more effectively, maintain product temperature, be ergonomic and increase the capacity of milk that can be distributed because previously they used boxes made of cork or styrofoam. This motorbike will be equipped with a milk storage device in the form of a detachable cooler box or a portable cool box. In this design the anthropometry or body dimensions used are the forward span with the 50th percentile so that all workers can use this tool. with the portable tolbox design, increasing the duration of milk storage time from 8 hours to 24 hours so that marketing and sales departments can take longer to distribute milk products and distribute more capacity
{"title":"Portable Coolbox Design For Milk Storage","authors":"Enty Nur Hayati, M. R. Radyanto, Firman Ardiansyah Ekoanindiyo, Endro Prihastono","doi":"10.37385/jaets.v4i1.1337","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1337","url":null,"abstract":"The SN Multi-Business Cooperative (KSU) was founded in 2011 in Semarang Regency. This cooperative operates in the storage of pure cow's milk with a total of around 300 milk farmers located around the cooperative. The problem that often arises is the dependency on receiving milk by the milk factory. Milk that has been sent to the dairy factory can be rejected by the milk factory for various reasons. In the field of marketing, KSU SN established a business entity with the name CV MSN which is located on Jalan Tirto Agung, Semarang. Product delivery logistics activities have so far been carried out with four-wheeled vehicles and using two-wheeled vehicles. To transport milk, each driver uses a bag or styrofoam which is used to transport milk products. Apart from being impractical, the transport process is messy, and the milk temperature cannot be maintained. To overcome this problem, milk transport boxes are designed to be able to transport milk more effectively, maintain product temperature, be ergonomic and increase the capacity of milk that can be distributed because previously they used boxes made of cork or styrofoam. This motorbike will be equipped with a milk storage device in the form of a detachable cooler box or a portable cool box. In this design the anthropometry or body dimensions used are the forward span with the 50th percentile so that all workers can use this tool. with the portable tolbox design, increasing the duration of milk storage time from 8 hours to 24 hours so that marketing and sales departments can take longer to distribute milk products and distribute more capacity","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43310150","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-14DOI: 10.37385/jaets.v4i1.1366
M. Riauan, N. Cahyono, Aini Maznina A.Manaf
A communication pattern is a procedure that may describe a stage of communication that takes place inside a particular communication context. This stage of communication can take place everywhere communication takes place. The process of communication may be understood by looking at communication patterns. The pattern of communication that was utilized in the process of putting e-planning into action in the Rokan Hilir district was the subject of this study. The research technique employed in this investigation was a qualitative research method, which involved summarizing the findings of research conducted in the field. There were a total of eight persons included as participants in this study. Five informants from Regional Apparatus Organizations act as Heads of Program Subdivision in Rokan Hilir Regency, in addition to 1 key informant who is the head of BAPPEDA of Rokan Hilir Regency Head of Program Subdivision. According to the findings of this research, Communication Pattern is utilized throughout the e-planning process with a mentorship program at each phase of the procedure. SIPD is utilized throughout the communication procedure to guarantee that each proposal gets entered into the system. The Regional Head, the Regency DPRD, Regional Apparatus Organizations, Community Apparatus Organizations, and the Community all participate in the coordination process. The community functions as a hub for communication and the generation of ideas, which in turn serve as the foundation for development projects that will be carried out in the Rokan Hilir Regency.
{"title":"Communication Patterns on Implementation of E-Planning in Rokan Hilir Regency","authors":"M. Riauan, N. Cahyono, Aini Maznina A.Manaf","doi":"10.37385/jaets.v4i1.1366","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1366","url":null,"abstract":"A communication pattern is a procedure that may describe a stage of communication that takes place inside a particular communication context. This stage of communication can take place everywhere communication takes place. The process of communication may be understood by looking at communication patterns. The pattern of communication that was utilized in the process of putting e-planning into action in the Rokan Hilir district was the subject of this study. The research technique employed in this investigation was a qualitative research method, which involved summarizing the findings of research conducted in the field. There were a total of eight persons included as participants in this study. Five informants from Regional Apparatus Organizations act as Heads of Program Subdivision in Rokan Hilir Regency, in addition to 1 key informant who is the head of BAPPEDA of Rokan Hilir Regency Head of Program Subdivision. According to the findings of this research, Communication Pattern is utilized throughout the e-planning process with a mentorship program at each phase of the procedure. SIPD is utilized throughout the communication procedure to guarantee that each proposal gets entered into the system. The Regional Head, the Regency DPRD, Regional Apparatus Organizations, Community Apparatus Organizations, and the Community all participate in the coordination process. The community functions as a hub for communication and the generation of ideas, which in turn serve as the foundation for development projects that will be carried out in the Rokan Hilir Regency.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41802820","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-12DOI: 10.37385/jaets.v4i1.1326
J. Rahmadoni, Ricky Akbar, Rafiqatul Ulya
SIMNag (Nagari Management Information System) Kamang Mudiak is an information system in the nagari Kamang Mudiak. The SIMNag includes the Andalas University Service Team's web-based nagari management information system. The SIMNag menu includes a Nagari Profile, which includes information about the nagari symbol, vision and mission, organizational structure, government history, nagari history, maps of the nagari, nagari achievements, legal products, and nagari potential wealth. Furthermore, information about public information is provided, specifically nagari news related to the 11 pillars of Nagari Tageh, which include tags for health, education, food, economy, faith, bundo kanduang tags, mudo paga nagari tags, and information-based tags Digital bills, disaster bills, security and social disease bills, and law bills are all examples of bills. The developer of this application's distinctive feature, in addition to the nagari tageh feature, is the convenience feature for nagari residents to input or update their own personal and family data online. As a result, data on nagari Kamang Mudiak residents will always be updated without the need to wait for the nagari apparatus to do so. Furthermore, residents at this SIMNag can file complaints with the nagari government about anything that occurs in the vicinity of the population. It is necessary to assess the SIMNag. It is necessary to evaluate the SIMNag that has been built in order to determine the feasibility of the SIMNag application in facilitating community services. This research employs two approaches: PIECES (Performance, Information/Data, Economy, Control, Efficiency, and Security) and UAT (User Acceptance Testing). The research results in an evaluation of the system that was built, namely the nagari information system (SIMNag) in the Nagari Kamang Mudiak.
{"title":"Analysis of Nagari Management Information System Evaluation (SIMNAG) Using PIECES and UAT Methods","authors":"J. Rahmadoni, Ricky Akbar, Rafiqatul Ulya","doi":"10.37385/jaets.v4i1.1326","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1326","url":null,"abstract":"SIMNag (Nagari Management Information System) Kamang Mudiak is an information system in the nagari Kamang Mudiak. The SIMNag includes the Andalas University Service Team's web-based nagari management information system. The SIMNag menu includes a Nagari Profile, which includes information about the nagari symbol, vision and mission, organizational structure, government history, nagari history, maps of the nagari, nagari achievements, legal products, and nagari potential wealth. Furthermore, information about public information is provided, specifically nagari news related to the 11 pillars of Nagari Tageh, which include tags for health, education, food, economy, faith, bundo kanduang tags, mudo paga nagari tags, and information-based tags Digital bills, disaster bills, security and social disease bills, and law bills are all examples of bills. The developer of this application's distinctive feature, in addition to the nagari tageh feature, is the convenience feature for nagari residents to input or update their own personal and family data online. As a result, data on nagari Kamang Mudiak residents will always be updated without the need to wait for the nagari apparatus to do so. Furthermore, residents at this SIMNag can file complaints with the nagari government about anything that occurs in the vicinity of the population. It is necessary to assess the SIMNag. It is necessary to evaluate the SIMNag that has been built in order to determine the feasibility of the SIMNag application in facilitating community services. This research employs two approaches: PIECES (Performance, Information/Data, Economy, Control, Efficiency, and Security) and UAT (User Acceptance Testing). The research results in an evaluation of the system that was built, namely the nagari information system (SIMNag) in the Nagari Kamang Mudiak.","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48990200","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-12DOI: 10.37385/jaets.v4i1.1269
M. R. Ramadhan, Yusuf Ramadhan Nasution, Aninda Muliani Harahap
Technological developments are currently very influential in business collaboration, to be precise in Doyan's drink, Doyan is a local beverage brand that has difficulty determining franchise partnerships to determine the type of package in the strategy of location, area, and facilities of prospective franchisees, by implementing a Management Information System on Doyan can determine the type of franchise based on the required criteria, this study uses the Waterfal method in designing management information systems and uses the K-Means algorithm in determining the type of franchise that suits the needs of the candidate. K-Means functions to cluster the franchise type criteria data that will produce the closest value so that the output can choose and determine the more appropriate type of franchise package, and the store can manage product sales, stock, and attendance at all franchise branches
{"title":"Management Information System Implementation Doyan Drinks Using K-Means","authors":"M. R. Ramadhan, Yusuf Ramadhan Nasution, Aninda Muliani Harahap","doi":"10.37385/jaets.v4i1.1269","DOIUrl":"https://doi.org/10.37385/jaets.v4i1.1269","url":null,"abstract":"Technological developments are currently very influential in business collaboration, to be precise in Doyan's drink, Doyan is a local beverage brand that has difficulty determining franchise partnerships to determine the type of package in the strategy of location, area, and facilities of prospective franchisees, by implementing a Management Information System on Doyan can determine the type of franchise based on the required criteria, this study uses the Waterfal method in designing management information systems and uses the K-Means algorithm in determining the type of franchise that suits the needs of the candidate. K-Means functions to cluster the franchise type criteria data that will produce the closest value so that the output can choose and determine the more appropriate type of franchise package, and the store can manage product sales, stock, and attendance at all franchise branches","PeriodicalId":34350,"journal":{"name":"Journal of Applied Engineering and Technological Science","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41869824","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：