Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002101
Akshay Laxman Pujari, D. More
In this paper, a converter architecture which will provide a three-phase ac output and a boosted dc output simultaneously from a dc source in not more than one conversion stage is studied. This circuit known as $mathbf{3}-phi$ HBC ($mathbf{3}-phi$ hybrid boost converter), is obtained from the traditional dc-dc converter operating in boost mode, where a three phase bridge circuit takes place of control switch. HBC shows immanent shoot-through protection proficiency. Such converter with better multi-output competency and authenticity is befitting the systems with both ac & dc loads in simultaneous mode e.g. PV charging stations, residential and industrial applications, etc. Independent regulation of Both the three-phase ac output and step-up dc output is attainable in case of HBC. For our intent to regulate dc as well as ac output, appropriate PWM control scheme is given in brief. To validate the converter operation, simulation results are demonstrated with resistive and inductive loads and the steady state performance analysis is done.
{"title":"Analysis and Control of Hybrid Boost Converter with Simultaneous AC and DC Outputs","authors":"Akshay Laxman Pujari, D. More","doi":"10.1109/ICCES45898.2019.9002101","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002101","url":null,"abstract":"In this paper, a converter architecture which will provide a three-phase ac output and a boosted dc output simultaneously from a dc source in not more than one conversion stage is studied. This circuit known as $mathbf{3}-phi$ HBC ($mathbf{3}-phi$ hybrid boost converter), is obtained from the traditional dc-dc converter operating in boost mode, where a three phase bridge circuit takes place of control switch. HBC shows immanent shoot-through protection proficiency. Such converter with better multi-output competency and authenticity is befitting the systems with both ac & dc loads in simultaneous mode e.g. PV charging stations, residential and industrial applications, etc. Independent regulation of Both the three-phase ac output and step-up dc output is attainable in case of HBC. For our intent to regulate dc as well as ac output, appropriate PWM control scheme is given in brief. To validate the converter operation, simulation results are demonstrated with resistive and inductive loads and the steady state performance analysis is done.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"124 ","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133652251","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002225
K. Manivannane, M. Chidambaram
The volume of data entering into the cloud is rapidly increasing; therefore, on-demand cloud services should be provided to clients at any time, whereas providers must be able to preserve system availability as well as process a large volume of data. It is obligatory for cloud service providers to lessen large volumes of data; thereby they can reduce costs for maintaining large storage systems. Infrastructure level performance is an important problem which directly affects the overall working of cloud computing environment. The objective of our framework is enhancing the performance of cloud infrastructure. Our approach demonstrates high effective in cloud performance enhancement, as it displays enhancement in both the service providers as well as for cloud users.
{"title":"A Cloud Resource Scheduling Framework for big data stream and analytics in Cloud Environment","authors":"K. Manivannane, M. Chidambaram","doi":"10.1109/ICCES45898.2019.9002225","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002225","url":null,"abstract":"The volume of data entering into the cloud is rapidly increasing; therefore, on-demand cloud services should be provided to clients at any time, whereas providers must be able to preserve system availability as well as process a large volume of data. It is obligatory for cloud service providers to lessen large volumes of data; thereby they can reduce costs for maintaining large storage systems. Infrastructure level performance is an important problem which directly affects the overall working of cloud computing environment. The objective of our framework is enhancing the performance of cloud infrastructure. Our approach demonstrates high effective in cloud performance enhancement, as it displays enhancement in both the service providers as well as for cloud users.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131331991","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002564
Kritika Sharma, S. Agrawal, R. Somani, Pankaj Kumar
Following research paper presents hybrid photovoltaic array (PVA), Solid oxide fuel cell (SOFC) and generation network having some related to MPPT, Availability of Sun irradiance, PV String failure & Shadow effect on PV Panel. Solid Oxide Fuel Cell [SOFC] generates electricity directly by electro chemical process. Here SOFC model will generate electricity whenever Solar power fails to generate electricity according to grid code due to switching harmonics. This proposed system increases the Reliability of local distribution system. This proposed hybrid Solar plus SOFC model will sure help in Smart grid implementation. In this paper we have implemented complete three -phase PV with IC MPPT Controller SOFC hybrid generating power system in MATLAB Software.
{"title":"Performance analysis of three phase integrated generation of SOFC (solid oxide fuel cell), PV (photovoltaic), with IC MPPT (maximum power point tracking) Controller","authors":"Kritika Sharma, S. Agrawal, R. Somani, Pankaj Kumar","doi":"10.1109/ICCES45898.2019.9002564","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002564","url":null,"abstract":"Following research paper presents hybrid photovoltaic array (PVA), Solid oxide fuel cell (SOFC) and generation network having some related to MPPT, Availability of Sun irradiance, PV String failure & Shadow effect on PV Panel. Solid Oxide Fuel Cell [SOFC] generates electricity directly by electro chemical process. Here SOFC model will generate electricity whenever Solar power fails to generate electricity according to grid code due to switching harmonics. This proposed system increases the Reliability of local distribution system. This proposed hybrid Solar plus SOFC model will sure help in Smart grid implementation. In this paper we have implemented complete three -phase PV with IC MPPT Controller SOFC hybrid generating power system in MATLAB Software.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115915496","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002289
J. V. V. Sriram Sasank, G. Sahith, K. Abhinav, Meena Belwal
With an ascent in the development of web-based business, the utilization of credit cards for internet shopping has expanded significantly. This, in turn, has brought about a great deal of credit card fakes. However, once in a while. Consequently, the execution of effective fraud detection frameworks has turned out to be fundamental for all banks to limit their misfortunes as far as credit card transactions are concerned. Numerous advanced systems have been created to monitor different credit card exchanges in literature. In this way, individuals have been attempting their best to identify the extortion in credit card exchanges as much as they can. Various machine learning techniques have been applied to predict whether a particular transaction is fraudulent or not. The biggest challenge with the techniques is the unavailability of the balanced dataset. Which is due to the nature of the transaction: the fraud transactions are too less when compared to genuine transactions. This work handles the challenge by balancing the dataset. Five machine learning techniques: Random forest, Naive Bayes, Support Vector Machine, K-Nearest Neighbor and Logistic regression were applied on the balanced dataset with different sampling techniques such as Oversampling, Undersampling, Both sampling, ROSE and SMOTE. The performance metric AUC – ROC suggests that logistic regression performs with an accuracy of 97.04 % and precision of 99.99%.
{"title":"Credit Card Fraud Detection Using Various Classification and Sampling Techniques: A Comparative Study","authors":"J. V. V. Sriram Sasank, G. Sahith, K. Abhinav, Meena Belwal","doi":"10.1109/ICCES45898.2019.9002289","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002289","url":null,"abstract":"With an ascent in the development of web-based business, the utilization of credit cards for internet shopping has expanded significantly. This, in turn, has brought about a great deal of credit card fakes. However, once in a while. Consequently, the execution of effective fraud detection frameworks has turned out to be fundamental for all banks to limit their misfortunes as far as credit card transactions are concerned. Numerous advanced systems have been created to monitor different credit card exchanges in literature. In this way, individuals have been attempting their best to identify the extortion in credit card exchanges as much as they can. Various machine learning techniques have been applied to predict whether a particular transaction is fraudulent or not. The biggest challenge with the techniques is the unavailability of the balanced dataset. Which is due to the nature of the transaction: the fraud transactions are too less when compared to genuine transactions. This work handles the challenge by balancing the dataset. Five machine learning techniques: Random forest, Naive Bayes, Support Vector Machine, K-Nearest Neighbor and Logistic regression were applied on the balanced dataset with different sampling techniques such as Oversampling, Undersampling, Both sampling, ROSE and SMOTE. The performance metric AUC – ROC suggests that logistic regression performs with an accuracy of 97.04 % and precision of 99.99%.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"63 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114412254","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002215
S. Sharan, R. Viji, R. Pradeep, V. Sajith
Fatigue driving is suspected to be a primary cause of vehicle related crashes. Driver fatigue resulting from lack of rest is a significant factor in the expanding number of the mishaps on roads. A warning system can possibly reduce the accidents related to drivers drowsiness. By putting the camera inside the vehicle, the system can read the expressions of the driver and search for the eye-developments which demonstrate that the driver is never again in condition to drive. In such a case, a warning sign ought to be issued. Our face contains a great deal of supportive data; we can utilize the condition of eyes to discover the tiredness. In this paper, a methodology has been proposed for the eye state recognition dependent on convolutional neural network (CNN), which eventually calculates the percentage of eyelid closure (PERCLOS), and blink frequency to figure out the level of the drowsiness. A real-time monitoring unit is additionally created to alert the closest control unit about the status of drowsiness of the driver. Google Cloud Platform is used for training CNN and the trained model is implemented on Raspberry Pi. The trial results demonstrate that the presented technique has reduced training time of CNN network model, high acknowledgment exactness of condition of eyes and can distinguish the drowsiness viably.
{"title":"Driver Fatigue Detection Based On Eye State Recognition Using Convolutional Neural Network","authors":"S. Sharan, R. Viji, R. Pradeep, V. Sajith","doi":"10.1109/ICCES45898.2019.9002215","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002215","url":null,"abstract":"Fatigue driving is suspected to be a primary cause of vehicle related crashes. Driver fatigue resulting from lack of rest is a significant factor in the expanding number of the mishaps on roads. A warning system can possibly reduce the accidents related to drivers drowsiness. By putting the camera inside the vehicle, the system can read the expressions of the driver and search for the eye-developments which demonstrate that the driver is never again in condition to drive. In such a case, a warning sign ought to be issued. Our face contains a great deal of supportive data; we can utilize the condition of eyes to discover the tiredness. In this paper, a methodology has been proposed for the eye state recognition dependent on convolutional neural network (CNN), which eventually calculates the percentage of eyelid closure (PERCLOS), and blink frequency to figure out the level of the drowsiness. A real-time monitoring unit is additionally created to alert the closest control unit about the status of drowsiness of the driver. Google Cloud Platform is used for training CNN and the trained model is implemented on Raspberry Pi. The trial results demonstrate that the presented technique has reduced training time of CNN network model, high acknowledgment exactness of condition of eyes and can distinguish the drowsiness viably.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117143980","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002155
Abhay Kshirsagar, Narendra Walawalkar, H. Yadav, Shrutisneha Prasad, Prajakta Paranjape
This paper design a power monitoring system for household's plug-in loads which consumers use on a daily basis. This project once deployed in the field will sense the electrical quantities and upload it on the web server so that it will be accessible through the website as and when required. The output will show the graphical analysis of the analog electrical quantities which are easily analyzed by the non-technical person in the household. This system will help the user to have an analysis of power usage. On that basis, a detailed survey on power quality usage can be done by further developments and help us to have energy cut downs wherever necessary to save energy on industrial sites and distribution areas.
{"title":"Raspberry-Pi based Smart Power Monitoring system","authors":"Abhay Kshirsagar, Narendra Walawalkar, H. Yadav, Shrutisneha Prasad, Prajakta Paranjape","doi":"10.1109/ICCES45898.2019.9002155","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002155","url":null,"abstract":"This paper design a power monitoring system for household's plug-in loads which consumers use on a daily basis. This project once deployed in the field will sense the electrical quantities and upload it on the web server so that it will be accessible through the website as and when required. The output will show the graphical analysis of the analog electrical quantities which are easily analyzed by the non-technical person in the household. This system will help the user to have an analysis of power usage. On that basis, a detailed survey on power quality usage can be done by further developments and help us to have energy cut downs wherever necessary to save energy on industrial sites and distribution areas.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121987966","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002384
Saurav Sahoo, Saroj Kumar M ishra, J. Sahu
PV System is one of the most clean and preferable sources of energy. In this article, the PV System is used in special type of inverter known as Hysteresis Current Control (HCC) Inverter. The proposed system incorporates boost converter which uses tracking algorithm known as maximum power point tracking (MPPT). Various tracking mechanisms are available for extraction of maximum power, Two MPPT techniques used here are Perturb and Observe (P&O) method and Incremental Conductance (IC) method. The MPPT methods help the system to function more effectively. The output of the converter is given to a two level inverter. The inverter works on current control technique in which line current is forced to follow a reference current within a specific band. At last, the current output harmonics of the proposed system is compared with MPPT and without MPPT technique by using MATLAB simulation environment. Considering the THD values, it is found that MPPT optimized PV system gives better result.
{"title":"Standalone PV System Integrated with Hysteresis Current Controlled Inverter using MPPT Techniques","authors":"Saurav Sahoo, Saroj Kumar M ishra, J. Sahu","doi":"10.1109/ICCES45898.2019.9002384","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002384","url":null,"abstract":"PV System is one of the most clean and preferable sources of energy. In this article, the PV System is used in special type of inverter known as Hysteresis Current Control (HCC) Inverter. The proposed system incorporates boost converter which uses tracking algorithm known as maximum power point tracking (MPPT). Various tracking mechanisms are available for extraction of maximum power, Two MPPT techniques used here are Perturb and Observe (P&O) method and Incremental Conductance (IC) method. The MPPT methods help the system to function more effectively. The output of the converter is given to a two level inverter. The inverter works on current control technique in which line current is forced to follow a reference current within a specific band. At last, the current output harmonics of the proposed system is compared with MPPT and without MPPT technique by using MATLAB simulation environment. Considering the THD values, it is found that MPPT optimized PV system gives better result.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"466 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125830668","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002169
Misha, Dalveer Kaur
VoIP is Voice over Internet Protocol which is a real time application which allows transmitting voice through internet protocol. It provides various services from which one of the important services is phone service over dedicated IP network. The important quality which is perceived by the users of VoIP telephony is speech quality. The quality of speech is degraded by various factors such as packet loss, delay, jitter, etc. This paper concentrate in making better speech quality and to improve the MOS score by using standard PESQ over WIMAX system. Tool used for this purpose is MATLAB R2013b.
{"title":"Improving Mean Opinion Score (MOS) of VoIP in WiMAX System by Using an Efficient Technique","authors":"Misha, Dalveer Kaur","doi":"10.1109/ICCES45898.2019.9002169","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002169","url":null,"abstract":"VoIP is Voice over Internet Protocol which is a real time application which allows transmitting voice through internet protocol. It provides various services from which one of the important services is phone service over dedicated IP network. The important quality which is perceived by the users of VoIP telephony is speech quality. The quality of speech is degraded by various factors such as packet loss, delay, jitter, etc. This paper concentrate in making better speech quality and to improve the MOS score by using standard PESQ over WIMAX system. Tool used for this purpose is MATLAB R2013b.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"97 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124744162","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002182
P. Nehra, A. Sharma, Dolly Murodia, Deepanshu Gautam
This paper introduces AC to AC converter for Single phase Pulse Width Modulation (PWM), which can solve the commutation issue by employing AC to AC converters without detecting the input voltage polarity. With a salient structure of SC and connected inductors. The PWM ac to ac converters replaced by the SC design and a coupled inductor by the standard leg hence the boost inductor buck and boost type suggested converter is developed. In this commended work the suggested converter has requirement of two coupled inductor and this coupled inductor is combined with the boost inductor. The input inductor of suggested converter could be much compact than that of standard Pulse Width Modulation (PWM) AC to AC converter. The MATLAB-2016 b setting presents the simulation-based buck-boost ac to ac converter.
本文介绍了一种用于单相脉宽调制(PWM)的交流-交流变换器，该变换器无需检测输入电压极性就能解决换相问题。具有突出结构的SC和连接的电感。用SC设计代替PWM交流变换器，用标准支腿代替耦合电感，从而开发了升压电感降压和升压型建议变换器。在本文介绍的工作中，所建议的变换器需要两个耦合电感，并且该耦合电感与升压电感相结合。该变换器的输入电感比标准脉宽调制(PWM)交流变换器的输入电感要紧凑得多。MATLAB-2016 b设置给出了基于仿真的buck-boost ac - ac变换器。
{"title":"Analysis of Coupled Inductor Based Buck-Boost Single Phase PWM AC to AC Converter","authors":"P. Nehra, A. Sharma, Dolly Murodia, Deepanshu Gautam","doi":"10.1109/ICCES45898.2019.9002182","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002182","url":null,"abstract":"This paper introduces AC to AC converter for Single phase Pulse Width Modulation (PWM), which can solve the commutation issue by employing AC to AC converters without detecting the input voltage polarity. With a salient structure of SC and connected inductors. The PWM ac to ac converters replaced by the SC design and a coupled inductor by the standard leg hence the boost inductor buck and boost type suggested converter is developed. In this commended work the suggested converter has requirement of two coupled inductor and this coupled inductor is combined with the boost inductor. The input inductor of suggested converter could be much compact than that of standard Pulse Width Modulation (PWM) AC to AC converter. The MATLAB-2016 b setting presents the simulation-based buck-boost ac to ac converter.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125040703","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-01DOI: 10.1109/ICCES45898.2019.9002546
Rajalakshmi Menon, S. Gomathy, K. J. Lakshmipriya
This paper presents the analysis of two types of boost converter for PV and Wind in a hybrid Micro-grid. The main aim is to improve the voltage gain capacity of conventional boost converter used in PV and Wind sources for a Hybrid micro-grid. Boost converters are dc to dc converter used to increase the input voltage. Conventional boost converters have low voltage gain capacity with high duty ratio. To eliminate this problem a new three level boost converter which improves the voltage gain capacity with low duty ratio is proposed for PV and a new coupled inductor based boost converter is used for Wind, this also has a high voltage gain capacity. Through this modified converter the voltage gain capacity is increased. The circuit is designed in MATLAB/SIMULINK and results are verified.
{"title":"Analysis of Boost Converters for PV and Wind in a Hybrid Microgrid","authors":"Rajalakshmi Menon, S. Gomathy, K. J. Lakshmipriya","doi":"10.1109/ICCES45898.2019.9002546","DOIUrl":"https://doi.org/10.1109/ICCES45898.2019.9002546","url":null,"abstract":"This paper presents the analysis of two types of boost converter for PV and Wind in a hybrid Micro-grid. The main aim is to improve the voltage gain capacity of conventional boost converter used in PV and Wind sources for a Hybrid micro-grid. Boost converters are dc to dc converter used to increase the input voltage. Conventional boost converters have low voltage gain capacity with high duty ratio. To eliminate this problem a new three level boost converter which improves the voltage gain capacity with low duty ratio is proposed for PV and a new coupled inductor based boost converter is used for Wind, this also has a high voltage gain capacity. Through this modified converter the voltage gain capacity is increased. The circuit is designed in MATLAB/SIMULINK and results are verified.","PeriodicalId":348347,"journal":{"name":"2019 International Conference on Communication and Electronics Systems (ICCES)","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128313994","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：