Naser Badakhshan, K. Shahriar, Sajjad Afraei, E. Bakhtavar
Abstract Sustainable development is about creating a balance between development and environment, and it consists of three essential principles: environment, society, and economy. Today, one of the most important challenges in deep open pit mines is the transition from open pit to underground, which has positive and negative impacts on sustainable development indexes. In order to reduce these adverse impacts, the impact of various parts of the transition operation on these indexes should be evaluated and corrective and preventive measures should be implemented. In this study, using a hybrid semi-quantitative approach, the effects of the transition in the Songun copper mine were evaluated. The obtained results showed that the transition in Songun copper mine has the greatest impact on the economic index of sustainable development with a value of 67.72 percent. In addition, the amount of impact of transition in this mine on environmental and social index is 41.74 and 39.84% respectively. In the meantime, the most significant impact was determined on components such as production rate and productivity, mine life, operation and capital cost, mineral value and income per ton of ore, mine closure (and reclamation) cost, Initial investment rate of returns, post–mining land use type.
{"title":"Evaluating the impacts of the transition from open-pit to underground mining on sustainable development indexes","authors":"Naser Badakhshan, K. Shahriar, Sajjad Afraei, E. Bakhtavar","doi":"10.46873/2300-3960.1382","DOIUrl":"https://doi.org/10.46873/2300-3960.1382","url":null,"abstract":"Abstract Sustainable development is about creating a balance between development and environment, and it consists of three essential principles: environment, society, and economy. Today, one of the most important challenges in deep open pit mines is the transition from open pit to underground, which has positive and negative impacts on sustainable development indexes. In order to reduce these adverse impacts, the impact of various parts of the transition operation on these indexes should be evaluated and corrective and preventive measures should be implemented. In this study, using a hybrid semi-quantitative approach, the effects of the transition in the Songun copper mine were evaluated. The obtained results showed that the transition in Songun copper mine has the greatest impact on the economic index of sustainable development with a value of 67.72 percent. In addition, the amount of impact of transition in this mine on environmental and social index is 41.74 and 39.84% respectively. In the meantime, the most significant impact was determined on components such as production rate and productivity, mine life, operation and capital cost, mineral value and income per ton of ore, mine closure (and reclamation) cost, Initial investment rate of returns, post–mining land use type.","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"22 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2023-06-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78831325","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract In recent years, a variety of technologies have improved mining operations. One of them is the Unmanned Aerial Vehicles (UAVs), the emerging technology that has been changing the mining process, boosting mining safety and productivity. The main purpose of this paper is to review the applications of UAVs in the mining industry based on the results of 113 research papers over the past twelve years, from 2010 to May 2022. The potential applications of UAVs in the mining industry are broad. Based on the paper identified, eight categories are used to classify UAV applications in the mining sector. The reviewed literature revealed that UAVs are an excellent tool for multitasking at any stage of a mining project and in any type of mine. The findings of this study may serve as some guidelines for developing the necessary requirements for the use of UAV technology in mine sites.
{"title":"Applications of UAVs in mine industry: A scoping review","authors":"D. Minh, Nguyen Ba Dung","doi":"10.46873/2300-3960.1384","DOIUrl":"https://doi.org/10.46873/2300-3960.1384","url":null,"abstract":"Abstract In recent years, a variety of technologies have improved mining operations. One of them is the Unmanned Aerial Vehicles (UAVs), the emerging technology that has been changing the mining process, boosting mining safety and productivity. The main purpose of this paper is to review the applications of UAVs in the mining industry based on the results of 113 research papers over the past twelve years, from 2010 to May 2022. The potential applications of UAVs in the mining industry are broad. Based on the paper identified, eight categories are used to classify UAV applications in the mining sector. The reviewed literature revealed that UAVs are an excellent tool for multitasking at any stage of a mining project and in any type of mine. The findings of this study may serve as some guidelines for developing the necessary requirements for the use of UAV technology in mine sites.","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"5 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2023-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90447986","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper uses a case study of an abandoned magnesite mine in the Limpopo Province of South Africa to find ways of identifying post-mining land used from the current uses of the abandoned mine sites or features. The approach used involved carrying out a field characterization of the mine site and documentation of the current uses of the features of the abandoned mine site. The technique used to identify the internal and external factors of the land uses involved analyzing their Strength, Weakness, Opportunities, and Threats. The Analytic Hierarchy Process (AHP) technique was used for further ranking of the land uses to identify the most post-mining or rehabilitation land uses for the different parts of the mine. Lastly, the earthwork requirement in reshaping the terrain of the mine to support the selected land uses was estimated from the 3D-terrain models generated from height data collected using a Real-Time Kinematic Geographical Positioning System. The results of the study identified land use that needs further surface development as the most appropriate for the abandoned Nyala Mine. These land uses demonstrated the potential of addressing the hazards of the mine with the clear promise of improving the socio-economic status of the host communities.
{"title":"Evaluating the post-mining land uses of former mine sites for sustainable purposes in South Africa","authors":"S. E. Mhlongo","doi":"10.46873/2300-3960.1381","DOIUrl":"https://doi.org/10.46873/2300-3960.1381","url":null,"abstract":"This paper uses a case study of an abandoned magnesite mine in the Limpopo Province of South Africa to find ways of identifying post-mining land used from the current uses of the abandoned mine sites or features. The approach used involved carrying out a field characterization of the mine site and documentation of the current uses of the features of the abandoned mine site. The technique used to identify the internal and external factors of the land uses involved analyzing their Strength, Weakness, Opportunities, and Threats. The Analytic Hierarchy Process (AHP) technique was used for further ranking of the land uses to identify the most post-mining or rehabilitation land uses for the different parts of the mine. Lastly, the earthwork requirement in reshaping the terrain of the mine to support the selected land uses was estimated from the 3D-terrain models generated from height data collected using a Real-Time Kinematic Geographical Positioning System. The results of the study identified land use that needs further surface development as the most appropriate for the abandoned Nyala Mine. These land uses demonstrated the potential of addressing the hazards of the mine with the clear promise of improving the socio-economic status of the host communities.","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"11 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2023-06-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84956240","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The re-exploitation of coal seams located near the ground is one of the solutions to increase output, reduce mining investment costs, and avoid wasting coal resources. The re-exploitation of coal seams will also cause instability of the surrounding rock mass and may affect surface construction works. Through the process of re-exploiting the longwall in seam H10 at Mong Duong Coal Mine, the authors have studied and evaluated the stability of the rock mass and +30 level surface works (including fan station and gateroad). To achieve the results in this study, the numerical simulation model method and the analytical method were applied. The model analysis results have determined that the displacement and deformation areas of the rock mass around the mining area correspond to the length of the cut in the strike direction of the longwall H10. The analysis and calculation results from the model show that the longwall in seam H10 can be re-exploited when leaving a protective coal pillar about 50 m from the center of the +30 fan station at the east side; this distance ensures the stability of the rock mass that located near the ground and the surface works at +30.
{"title":"Research on stability of rock mass and +30 level surface construction works when re-exploiting the seam H10 at Mong Duong Coal Mine, Vietnam","authors":"Tien Trung Vu, Doan Viet Dao","doi":"10.46873/2300-3960.1380","DOIUrl":"https://doi.org/10.46873/2300-3960.1380","url":null,"abstract":"The re-exploitation of coal seams located near the ground is one of the solutions to increase output, reduce mining investment costs, and avoid wasting coal resources. The re-exploitation of coal seams will also cause instability of the surrounding rock mass and may affect surface construction works. Through the process of re-exploiting the longwall in seam H10 at Mong Duong Coal Mine, the authors have studied and evaluated the stability of the rock mass and +30 level surface works (including fan station and gateroad). To achieve the results in this study, the numerical simulation model method and the analytical method were applied. The model analysis results have determined that the displacement and deformation areas of the rock mass around the mining area correspond to the length of the cut in the strike direction of the longwall H10. The analysis and calculation results from the model show that the longwall in seam H10 can be re-exploited when leaving a protective coal pillar about 50 m from the center of the +30 fan station at the east side; this distance ensures the stability of the rock mass that located near the ground and the surface works at +30.","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"104 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2023-06-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85867899","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The extraction and economical use of methane from coal mines in the Upper Silesian Coal Basin, Poland (USCB) have shown a variable tendency in recent decades, with numerous fluctuations from year to year. In 2021, approximately 286 million m3 of methane was collected from coal mines, which accounted for approximately 40% of the total emissions of this gas to mine workings. Due to the fact that the economical use of coal mine methane brings environmental, economic and work safety benefits, increasing its extraction is an urgent need. Trends in changes in the amount of mined methane in the entire USCB and in the deposits where the most methane was extracted in the last 25 years were analysed. The most important potential factors influencing the variability of coal mine gas extraction were taken into account, i.e. elements of the geological structure, coal extraction, methane emissions, mining and technical conditions, etc. The directions for using the collected methane and the main consumers were discussed. The aim is to indicate the most important problems faced by coal mining in terms of the capture and management of methane over the last 25 years and to outline possible solutions.
{"title":"Time variability of methane extraction from hard coal deposits in the Upper Silesian Coal Basin (Poland) in relation to geological and mining conditions","authors":"S. Kędzior, M. Dreger","doi":"10.46873/2300-3960.1379","DOIUrl":"https://doi.org/10.46873/2300-3960.1379","url":null,"abstract":"Abstract The extraction and economical use of methane from coal mines in the Upper Silesian Coal Basin, Poland (USCB) have shown a variable tendency in recent decades, with numerous fluctuations from year to year. In 2021, approximately 286 million m3 of methane was collected from coal mines, which accounted for approximately 40% of the total emissions of this gas to mine workings. Due to the fact that the economical use of coal mine methane brings environmental, economic and work safety benefits, increasing its extraction is an urgent need. Trends in changes in the amount of mined methane in the entire USCB and in the deposits where the most methane was extracted in the last 25 years were analysed. The most important potential factors influencing the variability of coal mine gas extraction were taken into account, i.e. elements of the geological structure, coal extraction, methane emissions, mining and technical conditions, etc. The directions for using the collected methane and the main consumers were discussed. The aim is to indicate the most important problems faced by coal mining in terms of the capture and management of methane over the last 25 years and to outline possible solutions.","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"60 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2023-06-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90652599","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
I. Quaicoe, Martin Beyuo, Solomon Quaicoe, Nikao A. Lasidzi
Abstract Artisanal and small-scale gold mining (ASGM) sector employs about 80% of the mining workforce but only contributes about 20-30% of Ghana’s gold production. The low gold production is linked to low recoveries associated with the activities because ofinadequate understanding of the chemical, mineralogical and metallurgical characteristics of the ores. This study examined the metallurgical characteristics of typical small-scale gold mining tailings to understand their grinding characteristics, gold deportment and cyanidation behaviour. The gold deportment results showed that 96.1% of the gold in the samples is free milling (can be leached directly with cyanide and recovered through carbon adsorption), whilst the remaining 3.9% of the gold in the samples is associated/locked up with other mineral phases (carbonates, sulphides, carbonaceous matter and quartz). The gold-by-size distribution also indicated that 73.1% of the gold is contained in coarser size fractions (+150 µm), 14.96% isfrom–150 µm to +75 µm size range, and 11.83% is contained in the finer size distribution (–75 µm). This suggests that incorporating a gravity recovery system during processing will be highly advantageous. The leaching kinetics results showed that gold recoveries achieved within 8, 16 and 24 h were 68, 73.8 and 76.4%, respectively. The corresponding total cyanide consumption rates after 8, 16 and 24 h of leaching were 550, 580 and 600 ppm, respectively. Generally, the gold recoveries and the cyanide consumption rates agree with industrial practices/results. Overall, the outcomes of the study support the view that some small-scale gold mining tailings are economically viable, and hence can be re-processed through efficient processes such as carbon-in-leach/carbon-in-pulp.
{"title":"Diagnostic gold deportment studies and leaching behaviour of small-scale gold mining tailings from Eastern Region, Ghana","authors":"I. Quaicoe, Martin Beyuo, Solomon Quaicoe, Nikao A. Lasidzi","doi":"10.46873/2300-3960.1375","DOIUrl":"https://doi.org/10.46873/2300-3960.1375","url":null,"abstract":"Abstract Artisanal and small-scale gold mining (ASGM) sector employs about 80% of the mining workforce but only contributes about 20-30% of Ghana’s gold production. The low gold production is linked to low recoveries associated with the activities because ofinadequate understanding of the chemical, mineralogical and metallurgical characteristics of the ores. This study examined the metallurgical characteristics of typical small-scale gold mining tailings to understand their grinding characteristics, gold deportment and cyanidation behaviour. The gold deportment results showed that 96.1% of the gold in the samples is free milling (can be leached directly with cyanide and recovered through carbon adsorption), whilst the remaining 3.9% of the gold in the samples is associated/locked up with other mineral phases (carbonates, sulphides, carbonaceous matter and quartz). The gold-by-size distribution also indicated that 73.1% of the gold is contained in coarser size fractions (+150 µm), 14.96% isfrom–150 µm to +75 µm size range, and 11.83% is contained in the finer size distribution (–75 µm). This suggests that incorporating a gravity recovery system during processing will be highly advantageous. The leaching kinetics results showed that gold recoveries achieved within 8, 16 and 24 h were 68, 73.8 and 76.4%, respectively. The corresponding total cyanide consumption rates after 8, 16 and 24 h of leaching were 550, 580 and 600 ppm, respectively. Generally, the gold recoveries and the cyanide consumption rates agree with industrial practices/results. Overall, the outcomes of the study support the view that some small-scale gold mining tailings are economically viable, and hence can be re-processed through efficient processes such as carbon-in-leach/carbon-in-pulp.","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"14 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2023-03-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78879908","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Acknowledgments of Reviewers","authors":"","doi":"10.46873/2300-3960.1378","DOIUrl":"https://doi.org/10.46873/2300-3960.1378","url":null,"abstract":"","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135694922","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Dorjsuren Yandagsuren, Tatsuki Kurauchi, H. Toriya, H. Ikeda, Tsuyoshi Adachi, Y. Kawamura
{"title":"Research on vibration-based early diagnostic system for excavator motor bearing using 1-D CNN","authors":"Dorjsuren Yandagsuren, Tatsuki Kurauchi, H. Toriya, H. Ikeda, Tsuyoshi Adachi, Y. Kawamura","doi":"10.46873/2300-3960.1377","DOIUrl":"https://doi.org/10.46873/2300-3960.1377","url":null,"abstract":"","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"53 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2023-01-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73533535","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
J. Swanepoel, Jennifer Hines, V. Gopaldasani, B. Davies
{"title":"Hitting two birds with one emissions-based maintenance stone – a literature review on improving overall productivity of underground diesel fleets","authors":"J. Swanepoel, Jennifer Hines, V. Gopaldasani, B. Davies","doi":"10.46873/2300-3960.1376","DOIUrl":"https://doi.org/10.46873/2300-3960.1376","url":null,"abstract":"","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"23 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2023-01-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90701313","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Production management system in a modern coal and coke company based on the demand and quality of the exploited raw material in the aspect of building a service-oriented architecture","authors":"A. Dyczko","doi":"10.46873/2300-3960.1371","DOIUrl":"https://doi.org/10.46873/2300-3960.1371","url":null,"abstract":"","PeriodicalId":37284,"journal":{"name":"Journal of Sustainable Mining","volume":"39 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80823388","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：