首页 > 最新文献

ORAL and Implantology最新文献

英文 中文
Stress and strain distribution in three different mini dental implant designs using in implant retained overdenture: a finite element analysis study. 三种小型种植体在种植固位覆盖义齿中的应力应变分布:有限元分析研究。
Pub Date : 2016-10-01 DOI: 10.11138/orl/2016.9.4.202
W. Aunmeungtong, P. Khongkhunthian, Pimuden Rungsiyakull
Finite Element Analysis (FEA) has been used for prediction of stress and strain between dental implant components and bone in the implant design process. PURPOSE Purpose of this study was to characterize and analyze stress and strain distribution occurring in bone and implants and to compare stress and strain of three different implant designs. MATERIALS AND METHODS Three different mini dental implant designs were included in this study: 1. a mini dental implant with an internal implant-abutment connection (MDIi); 2. a mini dental implant with an external implant-abutment connection (MDIe); 3. a single piece mini dental implant (MDIs). All implant designs were scanned using micro-CT scans. The imaging details of the implants were used to simulate models for FEA. An artificial bone volume of 9×9 mm in size was constructed and each implant was placed separately at the center of each bone model. All bone-implant models were simulatively loaded under an axial compressive force of 100 N and a 45-degree force of 100 N loading at the top of the implants using computer software to evaluate stress and strain distribution. RESULTS There was no difference in stress or strain between the three implant designs. The stress and strain occurring in all three mini dental implant designs were mainly localized at the cortical bone around the bone-implant interface. Oblique 45° loading caused increased deformation, magnitude and distribution of stress and strain in all implant models. CONCLUSIONS Within the limits of this study, the average stress and strain in bone and implant models with MDIi were similar to those with MDIe and MDIs. The oblique 45° load played an important role in dramatically increased average stress and strain in all bone-implant models. CLINICAL IMPLICATIONS Mini dental implants with external or internal connections have similar stress distribution to single piece mini dental implants. In clinical situations, the three types of mini dental implant should exhibit the same behavior to chewing force.
在种植体设计过程中,有限元分析(FEA)已被用于预测牙种植体构件与骨之间的应力和应变。目的本研究的目的是描述和分析骨和种植体的应力和应变分布,并比较三种不同种植体设计的应力和应变。材料与方法本研究采用三种不同的微型种植体设计:1。内置种植体-基台连接(MDIi)的迷你种植体;2. 带有外部种植体-基台连接(MDIe)的迷你牙种植体;3.单片微型牙种植体(MDIs)所有种植体设计均采用微ct扫描。利用植入物的成像细节模拟模型进行有限元分析。构建人工骨体积9×9 mm,每个种植体分别放置在每个骨模型的中心。所有骨-种植体模型在100 N的轴向压缩力和100 N 45度的种植体顶部载荷下,通过计算机软件模拟加载,评估应力应变分布。结果三种种植体的应力应变无明显差异。三种微型种植体的应力和应变主要集中在骨-种植体界面周围的皮质骨上。倾斜45°加载导致所有种植体模型的变形、大小和应力应变分布增加。结论在本研究范围内,MDIi骨和种植体模型的平均应力和应变与MDIe和mdi模型相似。在所有骨种植体模型中,倾斜45°载荷在显著增加平均应力和应变中起重要作用。临床意义外连接或内连接的微型种植体与单片微型种植体的应力分布相似。在临床应用中,三种微型种植体对咀嚼力应表现出相同的行为。
{"title":"Stress and strain distribution in three different mini dental implant designs using in implant retained overdenture: a finite element analysis study.","authors":"W. Aunmeungtong, P. Khongkhunthian, Pimuden Rungsiyakull","doi":"10.11138/orl/2016.9.4.202","DOIUrl":"https://doi.org/10.11138/orl/2016.9.4.202","url":null,"abstract":"Finite Element Analysis (FEA) has been used for prediction of stress and strain between dental implant components and bone in the implant design process. PURPOSE Purpose of this study was to characterize and analyze stress and strain distribution occurring in bone and implants and to compare stress and strain of three different implant designs. MATERIALS AND METHODS Three different mini dental implant designs were included in this study: 1. a mini dental implant with an internal implant-abutment connection (MDIi); 2. a mini dental implant with an external implant-abutment connection (MDIe); 3. a single piece mini dental implant (MDIs). All implant designs were scanned using micro-CT scans. The imaging details of the implants were used to simulate models for FEA. An artificial bone volume of 9×9 mm in size was constructed and each implant was placed separately at the center of each bone model. All bone-implant models were simulatively loaded under an axial compressive force of 100 N and a 45-degree force of 100 N loading at the top of the implants using computer software to evaluate stress and strain distribution. RESULTS There was no difference in stress or strain between the three implant designs. The stress and strain occurring in all three mini dental implant designs were mainly localized at the cortical bone around the bone-implant interface. Oblique 45° loading caused increased deformation, magnitude and distribution of stress and strain in all implant models. CONCLUSIONS Within the limits of this study, the average stress and strain in bone and implant models with MDIi were similar to those with MDIe and MDIs. The oblique 45° load played an important role in dramatically increased average stress and strain in all bone-implant models. CLINICAL IMPLICATIONS Mini dental implants with external or internal connections have similar stress distribution to single piece mini dental implants. In clinical situations, the three types of mini dental implant should exhibit the same behavior to chewing force.","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"9 4 1","pages":"202-212"},"PeriodicalIF":0.0,"publicationDate":"2016-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.11138/orl/2016.9.4.202","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"63489202","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 21
Removal torque evaluation of three different abutment screws for single implant restorations after mechanical cyclic loading. 机械循环加载后单种植体修复中三种不同基牙螺钉的移除扭矩评估。
Pub Date : 2016-10-01 DOI: 10.11138/orl/2016.9.4.213
T. Paepoemsin, P. Reichart, P. Chaijareenont, F. Strietzel, P. Khongkhunthian
PURPOSEThe aim of this study was to evaluate the removal torque of three different abutment screws and pull out strength of implant-abutment connection for single implant restorations after mechanical cyclic loading.METHODSThe study was performed in accordance with ISO 14801:2007. Three implant groups (n=15) were used: group A, PW Plus® with flat head screw; group B, PW Plus® with tapered screw; and group C, Conelog® with flat head screw. All groups had the same implant-abutment connection feature: cone with mandatory index. All screws were tightened with manufacturer's recommended torque. Ten specimens in each group underwent cyclic loading (1×106 cycles, 10 Hz, and 250 N). Then, all specimens were un-tightened, measured for the removal torque, and underwent a tensile test. The force that dislodged abutment from implant fixture was recorded. The data were analysed using independent sample t-test, ANOVA and Tukey HSD test.RESULTSBefore cyclic loading, removal torque in groups A, B and C were significantly different (B> A> C, P<.05). After cyclic loading, removal torque in all groups decreased significantly (P<.05). Group C revealed significantly less removal torque than groups A and B (P<.005). Tensile force in all groups significantly increased after cyclic loading (P<.05), group A had significantly less tensile force than groups B and C (P<.005).CONCLUSIONSRemoval torque reduced significantly after cyclic loading. Before cyclic loading, tapered screws maintained more preload than did flat head screws. After cyclic loading, tapered and flat head screws maintained even amounts of preload. The tensile force that dislodged abutment from implant fixture increased immensely after cyclic loading.
目的评价单种植体修复在机械循环载荷作用下,三种不同的基牙螺钉的移除扭矩和种植体-基牙连接的拔出强度。方法按照ISO 14801:2007标准进行研究。使用三组种植体(n=15): A组,PW Plus®扁头螺钉;B组为PW Plus®锥形螺杆;C组为Conelog®扁头螺钉。所有组均具有相同的种植体-基台连接特征:具有强制性指标的锥体。所有螺丝都按照制造商推荐的扭矩拧紧。每组10个试件进行循环加载(1×106 cycles, 10 Hz, 250 N),然后将所有试件解紧,测量去除扭矩,并进行拉伸试验。记录基台从种植体固定装置上位移的力。数据分析采用独立样本t检验、方差分析和Tukey HSD检验。结果循环加载前,A、B、C组的去除扭矩差异有统计学意义(B> A> C, P< 0.05)。循环加载后,各组去除扭矩均显著降低(P< 0.05)。C组脱毛力矩明显小于A、B组(P< 0.05)。循环加载后各组拉伸力均显著升高(P< 0.05), A组拉伸力显著低于B、C组(P< 0.005)。结论经循环加载后,去除扭矩明显减小。在循环加载前,锥形螺钉比平头螺钉保持更多的预紧力。循环加载后,锥形和平头螺钉保持均匀的预载荷量。循环加载后,基台与种植固定体之间的拉伸力明显增大。
{"title":"Removal torque evaluation of three different abutment screws for single implant restorations after mechanical cyclic loading.","authors":"T. Paepoemsin, P. Reichart, P. Chaijareenont, F. Strietzel, P. Khongkhunthian","doi":"10.11138/orl/2016.9.4.213","DOIUrl":"https://doi.org/10.11138/orl/2016.9.4.213","url":null,"abstract":"PURPOSE\u0000The aim of this study was to evaluate the removal torque of three different abutment screws and pull out strength of implant-abutment connection for single implant restorations after mechanical cyclic loading.\u0000\u0000\u0000METHODS\u0000The study was performed in accordance with ISO 14801:2007. Three implant groups (n=15) were used: group A, PW Plus® with flat head screw; group B, PW Plus® with tapered screw; and group C, Conelog® with flat head screw. All groups had the same implant-abutment connection feature: cone with mandatory index. All screws were tightened with manufacturer's recommended torque. Ten specimens in each group underwent cyclic loading (1×106 cycles, 10 Hz, and 250 N). Then, all specimens were un-tightened, measured for the removal torque, and underwent a tensile test. The force that dislodged abutment from implant fixture was recorded. The data were analysed using independent sample t-test, ANOVA and Tukey HSD test.\u0000\u0000\u0000RESULTS\u0000Before cyclic loading, removal torque in groups A, B and C were significantly different (B> A> C, P<.05). After cyclic loading, removal torque in all groups decreased significantly (P<.05). Group C revealed significantly less removal torque than groups A and B (P<.005). Tensile force in all groups significantly increased after cyclic loading (P<.05), group A had significantly less tensile force than groups B and C (P<.005).\u0000\u0000\u0000CONCLUSIONS\u0000Removal torque reduced significantly after cyclic loading. Before cyclic loading, tapered screws maintained more preload than did flat head screws. After cyclic loading, tapered and flat head screws maintained even amounts of preload. The tensile force that dislodged abutment from implant fixture increased immensely after cyclic loading.","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"19 1","pages":"213-221"},"PeriodicalIF":0.0,"publicationDate":"2016-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"63489212","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 20
HPV and oral lesions: preventive possibilities, vaccines and early diagnosis of malignant lesions. 人乳头瘤病毒与口腔病变:预防的可能性、疫苗和恶性病变的早期诊断。
Pub Date : 2016-07-25 eCollection Date: 2015-04-01 DOI: 10.11138/orl/2015.8.2.045
D Testi, M Nardone, P Melone, P Cardelli, L Ottria, C Arcuri

The importance of HPV in world healthy is high, in fact high-risk HPV types contribute significantly to viral associated neoplasms. In this article we will analyze vary expression of HPV in oral cavity both benign and malignant, their prevalence and the importance in early diagnosis and prevention. The classical oral lesions associated with human papillomavirus are squamous cell papilloma, condyloma acuminatum, verruca vulgaris and focal epithelial hyperplasia. Overall, HPV types 2, 4, 6, 11, 13 and 32 have been associated with benign oral lesions while HPV types 16 and 18 have been associated with malignant lesions, especially in cancers of the tonsils and elsewhere in the oropharynx. Transmission of the virus can occur with direct contact, genital contact, anal and oral sex; latest studies suggest a salivary transmission and from mother to child during delivery. The number of lifetime sexual partners is an important risk factor for the development of HPV-positive head-neck cancer. Oral/oropharyngeal cancer etiologically associated with HPV having an increased survival and a better prognostic (85%-90% to five years). There is no cure for the virus. There are two commercially available prophylactic vaccines against HPV today: the bivalent (16 and 18) Cervarix® and the tetravalent (6, 11, 16 and 18) Gardasil® and new vaccine Gardasil 9 (6, 11, 16, 18, 31, 33, 45, 52, 58) was approved in the United States. To be effective, such vaccination should start before "sexual puberty". The vaccine could be an important preventive strategy, in fact the scientific community is in agreement on hypothesis that blocking the contagion it may also limit the distance complications as the oropharyngeal cancer.

人乳头瘤病毒对世界健康的重要性不言而喻,事实上,高危类型的人乳头瘤病毒对病毒性肿瘤的发生有很大的影响。在这篇文章中,我们将分析人乳头瘤病毒在口腔良性和恶性肿瘤中的不同表现、其发病率以及在早期诊断和预防中的重要性。与人类乳头瘤病毒有关的经典口腔病变包括鳞状细胞乳头状瘤、尖锐湿疣、寻常疣和局灶性上皮增生。总的来说,2、4、6、11、13 和 32 型 HPV 与良性口腔病变有关,而 16 和 18 型 HPV 则与恶性病变有关,尤其是扁桃体和口咽部其他部位的癌症。病毒可通过直接接触、生殖器接触、肛交和口交传播;最新研究表明,可通过唾液传播,也可在分娩时通过母婴传播。终生性伴侣的数量是人乳头瘤病毒阳性头颈癌发病的一个重要风险因素。与人乳头瘤病毒病因相关的口腔癌/咽喉癌的存活率更高,预后更好(85%-90%可存活五年)。目前还没有治愈这种病毒的方法。目前市面上有两种 HPV 预防疫苗:二价(16 和 18)Cervarix® 和四价(6、11、16 和 18)Gardasil®,美国还批准了新疫苗 Gardasil 9(6、11、16、18、31、33、45、52、58)。这种疫苗应在 "性青春期 "之前开始接种,这样才能有效。这种疫苗可能是一种重要的预防策略,事实上,科学界一致认为,阻断传染也可能限制口咽癌等远距离并发症的发生。
{"title":"HPV and oral lesions: preventive possibilities, vaccines and early diagnosis of malignant lesions.","authors":"D Testi, M Nardone, P Melone, P Cardelli, L Ottria, C Arcuri","doi":"10.11138/orl/2015.8.2.045","DOIUrl":"10.11138/orl/2015.8.2.045","url":null,"abstract":"<p><p>The importance of HPV in world healthy is high, in fact high-risk HPV types contribute significantly to viral associated neoplasms. In this article we will analyze vary expression of HPV in oral cavity both benign and malignant, their prevalence and the importance in early diagnosis and prevention. The classical oral lesions associated with human papillomavirus are squamous cell papilloma, condyloma acuminatum, verruca vulgaris and focal epithelial hyperplasia. Overall, HPV types 2, 4, 6, 11, 13 and 32 have been associated with benign oral lesions while HPV types 16 and 18 have been associated with malignant lesions, especially in cancers of the tonsils and elsewhere in the oropharynx. Transmission of the virus can occur with direct contact, genital contact, anal and oral sex; latest studies suggest a salivary transmission and from mother to child during delivery. The number of lifetime sexual partners is an important risk factor for the development of HPV-positive head-neck cancer. Oral/oropharyngeal cancer etiologically associated with HPV having an increased survival and a better prognostic (85%-90% to five years). There is no cure for the virus. There are two commercially available prophylactic vaccines against HPV today: the bivalent (16 and 18) Cervarix® and the tetravalent (6, 11, 16 and 18) Gardasil® and new vaccine Gardasil 9 (6, 11, 16, 18, 31, 33, 45, 52, 58) was approved in the United States. To be effective, such vaccination should start before \"sexual puberty\". The vaccine could be an important preventive strategy, in fact the scientific community is in agreement on hypothesis that blocking the contagion it may also limit the distance complications as the oropharyngeal cancer. </p>","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"8 2-3","pages":"45-51"},"PeriodicalIF":0.0,"publicationDate":"2016-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4969729/pdf/45-51.pdf","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34332369","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Combined orthodontic-surgical approach in the treatment of impacted maxillary canines: three clinical cases. 正畸-外科联合入路治疗上颌埋伏牙3例临床分析。
Pub Date : 2016-07-25 eCollection Date: 2015-04-01 DOI: 10.11138/orl/2015.8.2.063
M Spuntarelli, F Cecchetti, L Arcuri, D Testi, P Melone, E Bigelli, F Germano

Impaction of maxillary canine is a relatively frequent orthodontic anomaly which could represent fuctional and aesthetic problems for patients. Nowadays, the conventional technique to impacted canines consists of a combined orthodontic and surgical approach, aimed to guide cuspids at the center of the alveolar ridge in a stable position and surrounded by healthy hard and soft tissues. This article presents three cases studies with different combined surgical-orthodontic approaches for the treatment of infraosseous impacted canines. An impacted maxillary canine could be guided, after adequate space is created orthodontically, to the center of the ridge through an orthodontic traction directly applied to the crown of impacted cuspid. Several surgical techniques have been proposed to expose the crown of impacted tooth. Location (buccal or palatal side) of impactation and depth influence surgical approach in order to obtain best aesthetic and functional results.

上颌犬齿嵌塞是一种较为常见的畸型,对患者的功能和美观都有影响。目前,阻生犬的传统技术包括正畸和手术相结合的方法,旨在引导牙槽嵴中心的尖牙处于稳定的位置,并被健康的软硬组织包围。本文介绍了三个病例研究,采用不同的手术-正畸联合方法治疗骨下阻生犬。阻生上颌尖牙可以在正畸创造足够的空间后,通过直接应用于阻生尖牙冠的正畸牵引将阻生上颌尖牙引导到牙脊的中心。几种外科技术已被提出以暴露阻生牙的牙冠。为了获得最佳的美学和功能效果,嵌塞的位置(颊侧或腭侧)和深度影响手术入路。
{"title":"Combined orthodontic-surgical approach in the treatment of impacted maxillary canines: three clinical cases.","authors":"M Spuntarelli,&nbsp;F Cecchetti,&nbsp;L Arcuri,&nbsp;D Testi,&nbsp;P Melone,&nbsp;E Bigelli,&nbsp;F Germano","doi":"10.11138/orl/2015.8.2.063","DOIUrl":"https://doi.org/10.11138/orl/2015.8.2.063","url":null,"abstract":"<p><p>Impaction of maxillary canine is a relatively frequent orthodontic anomaly which could represent fuctional and aesthetic problems for patients. Nowadays, the conventional technique to impacted canines consists of a combined orthodontic and surgical approach, aimed to guide cuspids at the center of the alveolar ridge in a stable position and surrounded by healthy hard and soft tissues. This article presents three cases studies with different combined surgical-orthodontic approaches for the treatment of infraosseous impacted canines. An impacted maxillary canine could be guided, after adequate space is created orthodontically, to the center of the ridge through an orthodontic traction directly applied to the crown of impacted cuspid. Several surgical techniques have been proposed to expose the crown of impacted tooth. Location (buccal or palatal side) of impactation and depth influence surgical approach in order to obtain best aesthetic and functional results. </p>","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"8 2-3","pages":"63-7"},"PeriodicalIF":0.0,"publicationDate":"2016-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.11138/orl/2015.8.2.063","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34332371","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Oral and dental signs of child abuse and neglect. 儿童受虐待和忽视的口腔和牙齿症状。
Pub Date : 2016-07-25 eCollection Date: 2015-04-01 DOI: 10.11138/orl/2015.8.2.068
M Costacurta, D Benavoli, G Arcudi, R Docimo

Aim: The aim of this report is to identify the main oral and dental aspects of physical and sexual abuse and dental neglect in childhood, contributing to the precocious identification and diagnosis in a dental practice.

Methods: The oral and dental manifestations were divided and classified according to the type of child abuse: physical abuse, sexual abuse, neglect.

Physical abuse: Several studies in the literature have shown that oral or facial trauma occurs in about 50% of physically abused children; the oral cavity may be a central focus for physical abuse. Oro-facial manifestations of physical abuse include bruising, abrasions or lacerations of tongue, lips, oral mucosa, hard and soft palate, gingiva, alveolar mucosa, frenum; dental fractures, dental dislocations, dental avulsions; maxilla and mandible fractures.

Sexual abuse: Although the oral cavity is a frequent site of sexual abuse in children, visible oral injuries or infections are rare. Some oral signs may represent significant indications of sexual abuse, as erythema, ulcer, vescicle with purulent drainage or pseudomembranus and condylomatous lesions of lips, tongue, palate and nose-pharynx. Furthermore, if present erythema and petechiae, of unknown etiology, found on soft and hard palates junction or on the floor of the mouth, can be certainly evident proofs of forced oral sex.

Dental neglect: Oral signs of neglect are easily identifiable and are: poor oral hygiene, halitosis, Early Childhood Caries (ECC), odontogenous infections (recurrent and previous abscesses), periodontal disease, aptha lesions as a consequence of a nutritional deficiency status. Moreover, it is analyzed the assessment of bite marks because often associated with child abuse, the identification and collection of clinical evidence of this type of injury.

Conclusion: A precocious diagnosis of child abuse, in a dental practice, could considerably contribute in the identification of violence cases and in an early intervention.

目的:本报告的目的是确定儿童时期身体虐待、性虐待和牙科忽视的主要口腔和牙科方面,为牙科实践中的早熟识别和诊断做出贡献。方法:根据虐待儿童的类型对口腔和牙齿表现进行分类:身体虐待、性虐待、忽视。身体虐待:文献中的几项研究表明,大约50%的身体虐待儿童会遭受口腔或面部创伤;口腔可能是身体虐待的中心焦点。身体虐待的口腔-面部表现包括舌头、嘴唇、口腔粘膜、硬腭和软腭、牙龈、肺泡粘膜、系带的瘀伤、擦伤或撕裂;牙齿骨折、牙齿脱位、牙齿撕裂;上颌骨和下颌骨骨折。性虐待:尽管口腔是儿童性虐待的常见部位,但可见的口腔损伤或感染很少。一些口腔体征可能代表性虐待的显著指征,如红斑、溃疡、伴有脓性引流的血管或嘴唇、舌头、腭和鼻咽部的假膜和髁状瘤病变。此外,如果在软腭和硬腭交界处或口腔底部发现病因不明的红斑和瘀点,肯定是强迫口交的明显证据。牙科忽视:忽视的口腔症状很容易识别,包括:口腔卫生不良、口臭、儿童早期龋齿、牙源性感染(复发性和既往脓肿)、牙周病、营养缺乏引起的适足细胞病变。此外,它还分析了咬痕的评估,因为咬痕通常与虐待儿童有关,识别和收集这种类型伤害的临床证据。结论:在牙科实践中,对虐待儿童的早期诊断可以在很大程度上有助于识别暴力案件和早期干预。
{"title":"Oral and dental signs of child abuse and neglect.","authors":"M Costacurta,&nbsp;D Benavoli,&nbsp;G Arcudi,&nbsp;R Docimo","doi":"10.11138/orl/2015.8.2.068","DOIUrl":"10.11138/orl/2015.8.2.068","url":null,"abstract":"<p><strong>Aim: </strong>The aim of this report is to identify the main oral and dental aspects of physical and sexual abuse and dental neglect in childhood, contributing to the precocious identification and diagnosis in a dental practice.</p><p><strong>Methods: </strong>The oral and dental manifestations were divided and classified according to the type of child abuse: physical abuse, sexual abuse, neglect.</p><p><strong>Physical abuse: </strong>Several studies in the literature have shown that oral or facial trauma occurs in about 50% of physically abused children; the oral cavity may be a central focus for physical abuse. Oro-facial manifestations of physical abuse include bruising, abrasions or lacerations of tongue, lips, oral mucosa, hard and soft palate, gingiva, alveolar mucosa, frenum; dental fractures, dental dislocations, dental avulsions; maxilla and mandible fractures.</p><p><strong>Sexual abuse: </strong>Although the oral cavity is a frequent site of sexual abuse in children, visible oral injuries or infections are rare. Some oral signs may represent significant indications of sexual abuse, as erythema, ulcer, vescicle with purulent drainage or pseudomembranus and condylomatous lesions of lips, tongue, palate and nose-pharynx. Furthermore, if present erythema and petechiae, of unknown etiology, found on soft and hard palates junction or on the floor of the mouth, can be certainly evident proofs of forced oral sex.</p><p><strong>Dental neglect: </strong>Oral signs of neglect are easily identifiable and are: poor oral hygiene, halitosis, Early Childhood Caries (ECC), odontogenous infections (recurrent and previous abscesses), periodontal disease, aptha lesions as a consequence of a nutritional deficiency status. Moreover, it is analyzed the assessment of bite marks because often associated with child abuse, the identification and collection of clinical evidence of this type of injury.</p><p><strong>Conclusion: </strong>A precocious diagnosis of child abuse, in a dental practice, could considerably contribute in the identification of violence cases and in an early intervention.</p>","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"8 2-3","pages":"68-73"},"PeriodicalIF":0.0,"publicationDate":"2016-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.11138/orl/2015.8.2.068","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34332800","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 33
Sem analysis zirconia-ceramic adhesion interface. Sem 分析氧化锆-陶瓷粘附界面。
Pub Date : 2016-07-25 eCollection Date: 2015-04-01 DOI: 10.11138/orl/2015.8.2.052
P Cardelli, V Vertucci, M Montani, C Arcuri

Objectives: Modern dentistry increasingly tends to use materials aesthetically acceptable and biomimetic. Among these are zirconia and ceramics for several years, a combination that now has becoming synonym of aesthetic; however, what could be the real link between these two materials and especially its nature, remains a controversial topic debated in the literature. The aim of our study was to "underline" the type of bonding that could exist between these materials.

Materials and methods: To investigate the nature of this bond we used a SEM microscopy (Zeiss SUPRA 25). Different bilaminar specimens: "white" zirconia Zircodent® and ceramic "Noritake®", after being tested with loading test in bending (three-point-bending) and FEM analysis, were analyzed by SEM. Fragments' analysis in closeness of the fracture's point has allowed us to be able to "see" if at large magnifications between these two materials, and without the use of linear, could exist a lasting bond and the possible type of failure that could incur.

Results: From our analysis of the specimens' fragments analyzed after test Equipment, it is difficult to highlight a clear margin and no-adhesion zones between the two materials, although the analysis involving fragments adjacent to the fracture that has taken place at the time of Mechanical test Equipment.

Conclusions: According to our analysis and with all the clarification of the case, we can assume that you can obtain a long and lasting bond between the zirconia and ceramics. Agree to the data present in the literature, we can say that the type of bond varies according to the type of specimens and of course also the type of failure. In samples where the superstructure envelops the ceramic framework Zirconium we are in the presence of a cohesive failure, otherwise in a presence of adhesive failure.

目的:现代牙科越来越倾向于使用美学上可接受的仿生物材料。然而,这两种材料之间的真正联系是什么,尤其是其性质,在文献中仍是一个有争议的话题。我们的研究旨在 "强调 "这两种材料之间可能存在的粘合类型:为了研究这种结合的性质,我们使用了 SEM 显微镜(Zeiss SUPRA 25)。不同的双层试样:"白色 "氧化锆 Zircodent® 和陶瓷 "Noritake®"在经过弯曲加载测试(三点弯曲)和有限元分析后,用 SEM 进行了分析。通过对断裂点附近的碎片进行分析,我们可以 "看到 "这两种材料之间在不使用线性材料的情况下,在放大镜下是否存在持久的粘结力,以及可能出现的失效类型:从我们对试验设备后分析的试样碎片的分析来看,很难在两种材料之间突出明显的边缘和无粘着区,尽管分析涉及的碎片与机械试验设备时发生的断裂相邻:根据我们的分析和对所有情况的说明,我们可以认为氧化锆和陶瓷之间可以获得长期持久的粘结。与文献中的数据一致,我们可以说,粘接类型因试样类型而异,当然也因失效类型而异。在上层结构包覆锆陶瓷框架的试样中,我们看到的是内聚失效,否则就是粘合失效。
{"title":"Sem analysis zirconia-ceramic adhesion interface.","authors":"P Cardelli, V Vertucci, M Montani, C Arcuri","doi":"10.11138/orl/2015.8.2.052","DOIUrl":"10.11138/orl/2015.8.2.052","url":null,"abstract":"<p><strong>Objectives: </strong>Modern dentistry increasingly tends to use materials aesthetically acceptable and biomimetic. Among these are zirconia and ceramics for several years, a combination that now has becoming synonym of aesthetic; however, what could be the real link between these two materials and especially its nature, remains a controversial topic debated in the literature. The aim of our study was to \"underline\" the type of bonding that could exist between these materials.</p><p><strong>Materials and methods: </strong>To investigate the nature of this bond we used a SEM microscopy (Zeiss SUPRA 25). Different bilaminar specimens: \"white\" zirconia Zircodent® and ceramic \"Noritake®\", after being tested with loading test in bending (three-point-bending) and FEM analysis, were analyzed by SEM. Fragments' analysis in closeness of the fracture's point has allowed us to be able to \"see\" if at large magnifications between these two materials, and without the use of linear, could exist a lasting bond and the possible type of failure that could incur.</p><p><strong>Results: </strong>From our analysis of the specimens' fragments analyzed after test Equipment, it is difficult to highlight a clear margin and no-adhesion zones between the two materials, although the analysis involving fragments adjacent to the fracture that has taken place at the time of Mechanical test Equipment.</p><p><strong>Conclusions: </strong>According to our analysis and with all the clarification of the case, we can assume that you can obtain a long and lasting bond between the zirconia and ceramics. Agree to the data present in the literature, we can say that the type of bond varies according to the type of specimens and of course also the type of failure. In samples where the superstructure envelops the ceramic framework Zirconium we are in the presence of a cohesive failure, otherwise in a presence of adhesive failure.</p>","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"8 2-3","pages":"52-62"},"PeriodicalIF":0.0,"publicationDate":"2016-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4969731/pdf/52-62.pdf","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34332370","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Transcrestal guided sinus lift without grafting materials: a 36 months clinical prospective study. 经瓣引导下无移植材料的窦提升:一项36个月的临床前瞻性研究。
Pub Date : 2016-07-25 eCollection Date: 2015-04-01 DOI: 10.11138/orl/2015.8.2.074
D Spinelli, G DE Vico, R Condò, L Ottria, C Arcuri

Purpose: This study describes the ability to perform a technique for bone regeneration in maxillary posterior deficit (TGSL) without the use of bone grafting materials using a highly minimally invasive protocol.

Materials and methods: Sixty six implants have been inserted in the sinus floor of a total of 39 patients through the transcrestal guided sinus lift technique (TGSL). All patients have been followed for at least three years in function. The drilling protocol was adapted on the basis of bone density of each implant site to achieve a torque between 45 and 55 Ncm. Healing titanium abutments tightened to 35 Ncm have been used. A CAD/CAM metal ceramics final prosthetic restoration has been generated a six months after the tissues healing and the provisional functionalization of the occlusion. Survival rate of implants and prostheses, biological and biomechanical complications, changes in marginal bone levels, and total height of alveolar crest bone before and after surgery have been evaluate and measured by the results obtained in this prospective study. It was also measured the periodontal parameters as well as levels of perception of pain by the patient during the entire recovery period.

Results: The result of the data of follow-up was 41.96 (24 to 36) months. Cumulative implant survival was 98.53% at 3 years. There were no biological and mechanical complications and there were no prosthetic failures during the whole period of follow-up. The Marginal Bone Loss (MBL) average during the first year of operation was from 0.33 to 0.36 mm, while the 3-year follow-up, the MBL average was 0.51 to 0.29 mm. The average of residual bone height of alveolar ridge before treatment was 6.7 to 1.6 mm (range 5.1 to 9.2 mm), while the average bone height was gained 6,4 - 1.6 mm (range 3.2 to 8.1 mm). All patients reported lower pain levels and found to have normal periodontal parameters.

Conclusions: This study suggests that the use of guided surgery to perform transcrestal maxillary sinus lift to increase the sub-antral crestal height is a minimally invasive technique of success for the short and medium-term of follow-up, thus avoiding the extended treatment time and reducing the morbidity associated with the lifting of the floor of the maxillary sinus with traditional technique using bone grafting materials. Furthermore, this protocol without the use of graft materials does not vary the final outcome that have demonstrated the presence of newly formed bone around implants offering always predictable results, and giving a further reduction in the costs of the procedure rehabilitation.

目的:本研究描述了在不使用植骨材料的情况下,采用高度微创方案进行上颌后牙缺损(TGSL)骨再生技术的能力。材料与方法:采用经瓣引导窦底提升技术(TGSL)在39例患者的窦底植入66个种植体。所有患者的功能随访时间至少为三年。钻孔方案根据每个种植体部位的骨密度进行调整,以实现45至55 Ncm之间的扭矩。治疗用钛基牙紧固至35 Ncm。在组织愈合和暂时功能化六个月后,CAD/CAM金属陶瓷最终修复体被生成。通过这项前瞻性研究的结果,评估和测量了种植体和假体的存活率、生物和生物力学并发症、边缘骨水平的变化以及牙槽嵴骨的总高度。在整个康复期间,还测量了患者的牙周参数以及疼痛感知水平。结果:随访时间为41.96(24 ~ 36)个月。3年累积种植体存活率为98.53%。在整个随访期间,无生物和机械并发症,无假体失效。手术第一年的平均边际骨损失(MBL)为0.33 ~ 0.36 mm, 3年随访时平均MBL为0.51 ~ 0.29 mm。治疗前牙槽嵴残骨高度平均6.7 ~ 1.6 mm (5.1 ~ 9.2 mm),治疗前牙槽嵴残骨高度平均增加6.4 ~ 1.6 mm (3.2 ~ 8.1 mm)。所有患者均报告疼痛程度较低,牙周参数正常。结论:本研究提示,采用手术引导下行经颌窦提升术,提高上颌窦下嵴高度,是一种中短期随访成功的微创技术,避免了延长治疗时间,减少了传统技术采用植骨材料上颌窦底提升术的并发症。此外,这种不使用移植物材料的方案不会改变最终结果,证明在移植物周围存在新形成的骨,提供始终可预测的结果,并进一步降低手术康复的成本。
{"title":"Transcrestal guided sinus lift without grafting materials: a 36 months clinical prospective study.","authors":"D Spinelli, G DE Vico, R Condò, L Ottria, C Arcuri","doi":"10.11138/orl/2015.8.2.074","DOIUrl":"10.11138/orl/2015.8.2.074","url":null,"abstract":"<p><strong>Purpose: </strong>This study describes the ability to perform a technique for bone regeneration in maxillary posterior deficit (TGSL) without the use of bone grafting materials using a highly minimally invasive protocol.</p><p><strong>Materials and methods: </strong>Sixty six implants have been inserted in the sinus floor of a total of 39 patients through the transcrestal guided sinus lift technique (TGSL). All patients have been followed for at least three years in function. The drilling protocol was adapted on the basis of bone density of each implant site to achieve a torque between 45 and 55 Ncm. Healing titanium abutments tightened to 35 Ncm have been used. A CAD/CAM metal ceramics final prosthetic restoration has been generated a six months after the tissues healing and the provisional functionalization of the occlusion. Survival rate of implants and prostheses, biological and biomechanical complications, changes in marginal bone levels, and total height of alveolar crest bone before and after surgery have been evaluate and measured by the results obtained in this prospective study. It was also measured the periodontal parameters as well as levels of perception of pain by the patient during the entire recovery period.</p><p><strong>Results: </strong>The result of the data of follow-up was 41.96 (24 to 36) months. Cumulative implant survival was 98.53% at 3 years. There were no biological and mechanical complications and there were no prosthetic failures during the whole period of follow-up. The Marginal Bone Loss (MBL) average during the first year of operation was from 0.33 to 0.36 mm, while the 3-year follow-up, the MBL average was 0.51 to 0.29 mm. The average of residual bone height of alveolar ridge before treatment was 6.7 to 1.6 mm (range 5.1 to 9.2 mm), while the average bone height was gained 6,4 - 1.6 mm (range 3.2 to 8.1 mm). All patients reported lower pain levels and found to have normal periodontal parameters.</p><p><strong>Conclusions: </strong>This study suggests that the use of guided surgery to perform transcrestal maxillary sinus lift to increase the sub-antral crestal height is a minimally invasive technique of success for the short and medium-term of follow-up, thus avoiding the extended treatment time and reducing the morbidity associated with the lifting of the floor of the maxillary sinus with traditional technique using bone grafting materials. Furthermore, this protocol without the use of graft materials does not vary the final outcome that have demonstrated the presence of newly formed bone around implants offering always predictable results, and giving a further reduction in the costs of the procedure rehabilitation.</p>","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"8 2-3","pages":"74-86"},"PeriodicalIF":0.0,"publicationDate":"2016-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.11138/orl/2015.8.2.074","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34332802","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 11
Full digital workflow for implant-prosthetic rehabilitations: a case report. 植入式假肢康复的全数字化工作流程:一例报告。
Pub Date : 2016-07-23 DOI: 10.11138/orl/2015.8.4.114
L. Arcuri, C. Lorenzi, F. Cecchetti, Francesco Germano, M. Spuntarelli, A. Barlattani
OBJECTIVESThe aim of the present study was to describe a proof of concept digital workflow for the implant-prosthetic treatment in partially edentate patients and evaluate its clinical performance.METHODSA 55-year-old woman with a Kennedy class III bilateral edentulism in the mandible has been selected for a computer guided implantology according with the Smart Fusion® protocol (NobelBiocare, Kloten, Switzerland). After the template-guided implant placement, an immediate loading of the implants has been performed. QuickTemp conical temporary abutments were selected to deliver immediately prefabricated cement-retained provisionals. Two months after an impression was taken with an intraoral digital scanner (3Shape Trios3, Copenhagen, Denmark). The provisional restoration optical scanning was used to transfer the functionalized prosthetic contour to be duplicated into the definitive porcelain fused to zirconia restoration cemented on customized titanium abutments.RESULTSA satisfying esthetic and functional result has been achieved. No biological and mechanical complications were recorded.CONCLUSIONSThe investigated fully digital implant-prosthetic protocol provided a smooth, complication free and time effective treatment alternative to the conventional workflow. Besides the fully digital workflow allowed the surgical and prosthetic decision making and the communication within the dental team and with the patient. Further improvements heading to a direct match between the intraoral scan and the CBCT are strongly advised in order to create the so-called virtual patient.
目的本研究的目的是描述一种概念验证的数字工作流程,用于部分无牙患者的种植义肢治疗,并评估其临床表现。方法选择一名患有Kennedy III类双侧无牙症的55岁女性,根据Smart Fusion®方案(NobelBiocare, Kloten, Switzerland)进行计算机引导种植。模板引导种植体放置后,立即加载种植体。选择QuickTemp锥形临时基台来立即交付预制的水泥保留临时基台。用口腔内数字扫描仪(3Shape Trios3,哥本哈根,丹麦)拍摄印模两个月后。使用临时修复光学扫描将功能化假体轮廓复制到定制钛基台上的最终瓷融合氧化锆修复体中。结果取得了满意的美观和功能效果。无生物和机械并发症记录。结论所研究的全数字化种植-假体方案提供了一种顺利、无并发症和时间有效的治疗替代传统的工作流程。此外,完全数字化的工作流程允许手术和假肢决策以及牙科团队内部和患者之间的沟通。强烈建议进一步改进,使口内扫描和CBCT之间直接匹配,以创建所谓的虚拟患者。
{"title":"Full digital workflow for implant-prosthetic rehabilitations: a case report.","authors":"L. Arcuri, C. Lorenzi, F. Cecchetti, Francesco Germano, M. Spuntarelli, A. Barlattani","doi":"10.11138/orl/2015.8.4.114","DOIUrl":"https://doi.org/10.11138/orl/2015.8.4.114","url":null,"abstract":"OBJECTIVES\u0000The aim of the present study was to describe a proof of concept digital workflow for the implant-prosthetic treatment in partially edentate patients and evaluate its clinical performance.\u0000\u0000\u0000METHODS\u0000A 55-year-old woman with a Kennedy class III bilateral edentulism in the mandible has been selected for a computer guided implantology according with the Smart Fusion® protocol (NobelBiocare, Kloten, Switzerland). After the template-guided implant placement, an immediate loading of the implants has been performed. QuickTemp conical temporary abutments were selected to deliver immediately prefabricated cement-retained provisionals. Two months after an impression was taken with an intraoral digital scanner (3Shape Trios3, Copenhagen, Denmark). The provisional restoration optical scanning was used to transfer the functionalized prosthetic contour to be duplicated into the definitive porcelain fused to zirconia restoration cemented on customized titanium abutments.\u0000\u0000\u0000RESULTS\u0000A satisfying esthetic and functional result has been achieved. No biological and mechanical complications were recorded.\u0000\u0000\u0000CONCLUSIONS\u0000The investigated fully digital implant-prosthetic protocol provided a smooth, complication free and time effective treatment alternative to the conventional workflow. Besides the fully digital workflow allowed the surgical and prosthetic decision making and the communication within the dental team and with the patient. Further improvements heading to a direct match between the intraoral scan and the CBCT are strongly advised in order to create the so-called virtual patient.","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"8 4 1","pages":"114-121"},"PeriodicalIF":0.0,"publicationDate":"2016-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.11138/orl/2015.8.4.114","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"63488054","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 21
Autologous blood preparations rich in platelets, fibrin and growth factors. 富含血小板、纤维蛋白和生长因子的自体血液制剂。
Pub Date : 2016-07-23 DOI: 10.11138/orl/2015.8.4.096
C. Fioravanti, I. Frustaci, E. Armellin, R. Condò, C. Arcuri, L. Cerroni
OBJECTIVESBone regeneration is often needed prior to dental implant treatment due to the lack of adequate quantity and quality after infectious diseases. The greatest regenerative power was obtained with autologous tissue, primarily the bone alive, taken from the same site or adjacent sites, up to the use centrifugation of blood with the selection of the parts with the greatest potential regenerative. In fact, various techniques and technologies were chronologically successive to cope with an ever better preparation of these concentrates of blood. Our aim is to review these advances and discuss the ways in which platelet concentrates may provide such unexpected beneficial therapeutic effects.METHODSThe research has been carried out in the MEDLINE and Cochrane Central Register of Controlled Trials database by choosing keywords as "platelet rich plasma", "platelet rich fibrin", "platelet growth factors", and "bone regeneration" and "dentistry".RESULTSAutologous platelet rich plasma is a safe and low cost procedure to deliver growth factors for bone and soft tissue healing.CONCLUSIONThe great heterogeneity of clinical outcomes can be explained by the different PRP products with qualitative and quantitative difference among substance.
目的:由于感染性疾病后骨再生的数量和质量不足,需要在种植牙治疗前进行骨再生。再生能力最大的是自体组织,主要是取自同一部位或邻近部位的活骨,直到血液离心,选择再生潜力最大的部分。事实上,各种各样的技术和技术是按时间顺序相继出现的,以便更好地制备这些浓缩血液。我们的目的是回顾这些进展,并讨论血小板浓缩物可能提供这种意想不到的有益治疗效果的方式。方法在MEDLINE和Cochrane中央对照试验注册数据库中选择关键词为“富血小板血浆”、“富血小板纤维蛋白”、“血小板生长因子”、“骨再生”和“牙科”进行研究。结果自体富血小板血浆是一种安全、低成本的骨和软组织愈合生长因子输送方法。结论不同的PRP产品在质量和数量上存在差异,可以解释临床结果的巨大异质性。
{"title":"Autologous blood preparations rich in platelets, fibrin and growth factors.","authors":"C. Fioravanti, I. Frustaci, E. Armellin, R. Condò, C. Arcuri, L. Cerroni","doi":"10.11138/orl/2015.8.4.096","DOIUrl":"https://doi.org/10.11138/orl/2015.8.4.096","url":null,"abstract":"OBJECTIVES\u0000Bone regeneration is often needed prior to dental implant treatment due to the lack of adequate quantity and quality after infectious diseases. The greatest regenerative power was obtained with autologous tissue, primarily the bone alive, taken from the same site or adjacent sites, up to the use centrifugation of blood with the selection of the parts with the greatest potential regenerative. In fact, various techniques and technologies were chronologically successive to cope with an ever better preparation of these concentrates of blood. Our aim is to review these advances and discuss the ways in which platelet concentrates may provide such unexpected beneficial therapeutic effects.\u0000\u0000\u0000METHODS\u0000The research has been carried out in the MEDLINE and Cochrane Central Register of Controlled Trials database by choosing keywords as \"platelet rich plasma\", \"platelet rich fibrin\", \"platelet growth factors\", and \"bone regeneration\" and \"dentistry\".\u0000\u0000\u0000RESULTS\u0000Autologous platelet rich plasma is a safe and low cost procedure to deliver growth factors for bone and soft tissue healing.\u0000\u0000\u0000CONCLUSION\u0000The great heterogeneity of clinical outcomes can be explained by the different PRP products with qualitative and quantitative difference among substance.","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"8 4 1","pages":"96-113"},"PeriodicalIF":0.0,"publicationDate":"2016-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.11138/orl/2015.8.4.096","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"63488023","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 30
Full arch rehabilitation in severe maxillary atrophy with palatal approach implant placement: a case report. 腭入路种植修复重度上颌萎缩全弓1例。
Pub Date : 2016-07-01 DOI: 10.11138/orl/2016.9.3.115
M. A. Bassi, M. Lopez, C. Andrisani, Z. Ormanier, M. Gargari
PURPOSEThe edentulous severely atrophic maxilla, as consequence of alveolar bone resorption and pneumatisation of the maxillary sinus, represents a serious limitation to the implant rehabilitation. Implants insertion via palatal approach (PA), in combination with relatively minimally invasive techniques aimed at increasing bone volume without the use of autologous bone harvesting is a valid alternative among the options for the rehabilitation of the upper jaw.CLINICAL CASEIn a 70-year-old female, with a severe maxillary atrophy, 6 spiral taper implants were placed with the PA, combined with the bilateral transcrestal elevation of both the sinus floors and nasal cavities; a further GBR, with resorbable pericardium membrane covering a termoplastic allograft associated to a xenograft, was performed. The second stage was performed after 6 months. Implant prosthetic functionalization was carried out in 4 months by placing the removable prosthesis in direct contact with the healing cup screws. After that period the case was finalized with a hybrid prosthesis. Clinical and radiographic follow-ups were carried out at 6 months and at one year after prosthetic finalization, during which no pathological signs were recorded.CONCLUSIONSThe PA implant insertion described by the Authors, combined with bone augmentation procedures, performed in the same stage, may represent a valid and reliable solution to rehabilitate maxillary edentulous patients.
目的无牙上颌严重萎缩是上颌窦肺泡骨吸收和通气的结果,严重限制了种植体的康复。通过腭入路(PA)植入种植体,结合相对微创的技术,旨在增加骨体积,而不使用自体骨采集,是上颌康复的一种有效选择。临床病例1例70岁女性,上颌严重萎缩,采用PA植入6个螺旋锥形种植体,并结合双侧窦底和鼻腔经瓣抬高;进一步行GBR,将可吸收的心包膜覆盖在与异种移植物相关的异体移植物上。第二期于6个月后进行。通过将可移动假体与愈合杯螺钉直接接触,种植体假体功能化在4个月内进行。在此之后,该病例最终采用了混合假体。临床和影像学随访分别在假体定型后6个月和1年进行,期间无病理征象记录。结论作者所描述的PA种植体插入,结合骨增强手术,在同一阶段进行,可能是一种有效和可靠的修复上颌无牙患者的方法。
{"title":"Full arch rehabilitation in severe maxillary atrophy with palatal approach implant placement: a case report.","authors":"M. A. Bassi, M. Lopez, C. Andrisani, Z. Ormanier, M. Gargari","doi":"10.11138/orl/2016.9.3.115","DOIUrl":"https://doi.org/10.11138/orl/2016.9.3.115","url":null,"abstract":"PURPOSE\u0000The edentulous severely atrophic maxilla, as consequence of alveolar bone resorption and pneumatisation of the maxillary sinus, represents a serious limitation to the implant rehabilitation. Implants insertion via palatal approach (PA), in combination with relatively minimally invasive techniques aimed at increasing bone volume without the use of autologous bone harvesting is a valid alternative among the options for the rehabilitation of the upper jaw.\u0000\u0000\u0000CLINICAL CASE\u0000In a 70-year-old female, with a severe maxillary atrophy, 6 spiral taper implants were placed with the PA, combined with the bilateral transcrestal elevation of both the sinus floors and nasal cavities; a further GBR, with resorbable pericardium membrane covering a termoplastic allograft associated to a xenograft, was performed. The second stage was performed after 6 months. Implant prosthetic functionalization was carried out in 4 months by placing the removable prosthesis in direct contact with the healing cup screws. After that period the case was finalized with a hybrid prosthesis. Clinical and radiographic follow-ups were carried out at 6 months and at one year after prosthetic finalization, during which no pathological signs were recorded.\u0000\u0000\u0000CONCLUSIONS\u0000The PA implant insertion described by the Authors, combined with bone augmentation procedures, performed in the same stage, may represent a valid and reliable solution to rehabilitate maxillary edentulous patients.","PeriodicalId":38303,"journal":{"name":"ORAL and Implantology","volume":"9 3 1","pages":"115-122"},"PeriodicalIF":0.0,"publicationDate":"2016-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.11138/orl/2016.9.3.115","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"63488485","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 5
期刊
ORAL and Implantology
全部 Acc. Chem. Res. ACS Applied Bio Materials ACS Appl. Electron. Mater. ACS Appl. Energy Mater. ACS Appl. Mater. Interfaces ACS Appl. Nano Mater. ACS Appl. Polym. Mater. ACS BIOMATER-SCI ENG ACS Catal. ACS Cent. Sci. ACS Chem. Biol. ACS Chemical Health & Safety ACS Chem. Neurosci. ACS Comb. Sci. ACS Earth Space Chem. ACS Energy Lett. ACS Infect. Dis. ACS Macro Lett. ACS Mater. Lett. ACS Med. Chem. Lett. ACS Nano ACS Omega ACS Photonics ACS Sens. ACS Sustainable Chem. Eng. ACS Synth. Biol. Anal. Chem. BIOCHEMISTRY-US Bioconjugate Chem. BIOMACROMOLECULES Chem. Res. Toxicol. Chem. Rev. Chem. Mater. CRYST GROWTH DES ENERG FUEL Environ. Sci. Technol. Environ. Sci. Technol. Lett. Eur. J. Inorg. Chem. IND ENG CHEM RES Inorg. Chem. J. Agric. Food. Chem. J. Chem. Eng. Data J. Chem. Educ. J. Chem. Inf. Model. J. Chem. Theory Comput. J. Med. Chem. J. Nat. Prod. J PROTEOME RES J. Am. Chem. Soc. LANGMUIR MACROMOLECULES Mol. Pharmaceutics Nano Lett. Org. Lett. ORG PROCESS RES DEV ORGANOMETALLICS J. Org. Chem. J. Phys. Chem. J. Phys. Chem. A J. Phys. Chem. B J. Phys. Chem. C J. Phys. Chem. Lett. Analyst Anal. Methods Biomater. Sci. Catal. Sci. Technol. Chem. Commun. Chem. Soc. Rev. CHEM EDUC RES PRACT CRYSTENGCOMM Dalton Trans. Energy Environ. Sci. ENVIRON SCI-NANO ENVIRON SCI-PROC IMP ENVIRON SCI-WAT RES Faraday Discuss. Food Funct. Green Chem. Inorg. Chem. Front. Integr. Biol. J. Anal. At. Spectrom. J. Mater. Chem. A J. Mater. Chem. B J. Mater. Chem. C Lab Chip Mater. Chem. Front. Mater. Horiz. MEDCHEMCOMM Metallomics Mol. Biosyst. Mol. Syst. Des. Eng. Nanoscale Nanoscale Horiz. Nat. Prod. Rep. New J. Chem. Org. Biomol. Chem. Org. Chem. Front. PHOTOCH PHOTOBIO SCI PCCP Polym. Chem.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1