Abstract Bauxite residue is a major waste stream available in large volumes globally that can cause risks to the surrounding environment (e.g. ecotoxicity) when disposed and stored by conventional methods. There is yet no large-scale application and the utilization as supplementary cementitious material might be the best way to re-use bauxite residue. The main obstacle for the utilization of bauxite residue in the construction industry is the high alkalinity. This paper presents first results of a study on alkali reduction of bauxite residue by acetic acid treatment and the potential application of this alkali reduced bauxite residue as pozzolan in cementitious binders. A process of alkali reduction is presented that can help solving waste management problems of alumina refineries by transforming bauxite residue to a less hazardous waste, while producing a reactive pozzolan and Na-acetate that can find application in the construction and infrastructure market. 90% alkalinity reduction of bauxite residue could be achieved by simply washing with diluted acetic acid. Alkali-reduced bauxite residue showed good pozzolanic reactivity regarding portlandite consumption, bound water and 28-day compressive strength of mortars with 20% replacement of OPC.
{"title":"Alkali-reduced Bauxite Residue as Novel SCM","authors":"Tobias Danner, M. Sletnes, H. Justnes","doi":"10.2478/ncr-2020-0015","DOIUrl":"https://doi.org/10.2478/ncr-2020-0015","url":null,"abstract":"Abstract Bauxite residue is a major waste stream available in large volumes globally that can cause risks to the surrounding environment (e.g. ecotoxicity) when disposed and stored by conventional methods. There is yet no large-scale application and the utilization as supplementary cementitious material might be the best way to re-use bauxite residue. The main obstacle for the utilization of bauxite residue in the construction industry is the high alkalinity. This paper presents first results of a study on alkali reduction of bauxite residue by acetic acid treatment and the potential application of this alkali reduced bauxite residue as pozzolan in cementitious binders. A process of alkali reduction is presented that can help solving waste management problems of alumina refineries by transforming bauxite residue to a less hazardous waste, while producing a reactive pozzolan and Na-acetate that can find application in the construction and infrastructure market. 90% alkalinity reduction of bauxite residue could be achieved by simply washing with diluted acetic acid. Alkali-reduced bauxite residue showed good pozzolanic reactivity regarding portlandite consumption, bound water and 28-day compressive strength of mortars with 20% replacement of OPC.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"1 1","pages":"1 - 20"},"PeriodicalIF":1.0,"publicationDate":"2020-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84282999","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Babaahmadi, Gilles Plusquellec, E. L’Hôpital, U. Mueller
Abstract Worldwide increased concern of the CO2 emissions has led to the replacement of coal by biomass in combustion-based power plants. However, this would cause the scarcity of fly ash, one of the most well-known rest products from coal combustion, which is used as supplementary cementitious materials (SCM) in construction sector to reduce the large environmental footprint of cement production. Seeking to find alternative SCMs, this article aims to demonstrate the viability of using bio ashes in Sweden as SCM, which, due to lack of studies validating their value, are landfilled today. According to the obtained results, bio ashes produced at pulp and paper industries have a considerably consistent chemical composition and exhibit a satisfactory pozzolanic behaviour. Nevertheless, according to the conclusions of this study, the pozzolanicity of these alternative binders is not reflected equally with respect to the most known reactivity tests for common SCMs. The results imply that although “R3” tests method infers the pozzolanic characteristics of the bio ashes in focus of this study, the “activity index test” as well as “calcium consumption test” indicate otherwise.
{"title":"Utilization of Bio Ashes in Cement-based Materials: A Case Study in Cooperation with Pulp and Paper and Energy Production Industries in Sweden","authors":"A. Babaahmadi, Gilles Plusquellec, E. L’Hôpital, U. Mueller","doi":"10.2478/ncr-2020-0017","DOIUrl":"https://doi.org/10.2478/ncr-2020-0017","url":null,"abstract":"Abstract Worldwide increased concern of the CO2 emissions has led to the replacement of coal by biomass in combustion-based power plants. However, this would cause the scarcity of fly ash, one of the most well-known rest products from coal combustion, which is used as supplementary cementitious materials (SCM) in construction sector to reduce the large environmental footprint of cement production. Seeking to find alternative SCMs, this article aims to demonstrate the viability of using bio ashes in Sweden as SCM, which, due to lack of studies validating their value, are landfilled today. According to the obtained results, bio ashes produced at pulp and paper industries have a considerably consistent chemical composition and exhibit a satisfactory pozzolanic behaviour. Nevertheless, according to the conclusions of this study, the pozzolanicity of these alternative binders is not reflected equally with respect to the most known reactivity tests for common SCMs. The results imply that although “R3” tests method infers the pozzolanic characteristics of the bio ashes in focus of this study, the “activity index test” as well as “calcium consumption test” indicate otherwise.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"37 1","pages":"63 - 78"},"PeriodicalIF":1.0,"publicationDate":"2020-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78049984","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Concrete production, especially the cement production, stands for 5-8 percent of the global CO2 emissions. Since concrete is the most frequently used man-made construction materials, this fact is not surprising. Concrete is also the only realistic alternative in order to improve the living circumstances in many countries around the world. Due to its size, the concrete sector has a great responsibility for limiting the consequences of the on-going climate change. The Swedish cement producer Cementa has an ambitious zero vision stating zero CO2 emissions in year 2030. The measures include energy efficiency, bio mass instead of fossil fuels, blended cements, CO2 uptake through carbonation and Carbon Capture Storage (CCS). This paper discusses these measures but also others such as optimization of the concrete mix, optimization of the structural geometry and prolongation of the service life. The paper is ended by a section on adaptation since concrete will also have an important role concerning protection of the built environment for climate change. Protection structures against flood, reconstruction of dams, new waste-water systems and bright permeable concrete pavements reflecting sunlight and improving drainage after heavy rain constitute some examples.
{"title":"Concrete and Sustainability – Some Thoughts from a Swedish Horizon","authors":"J. Silfwerbrand","doi":"10.2478/ncr-2020-0019","DOIUrl":"https://doi.org/10.2478/ncr-2020-0019","url":null,"abstract":"Abstract Concrete production, especially the cement production, stands for 5-8 percent of the global CO2 emissions. Since concrete is the most frequently used man-made construction materials, this fact is not surprising. Concrete is also the only realistic alternative in order to improve the living circumstances in many countries around the world. Due to its size, the concrete sector has a great responsibility for limiting the consequences of the on-going climate change. The Swedish cement producer Cementa has an ambitious zero vision stating zero CO2 emissions in year 2030. The measures include energy efficiency, bio mass instead of fossil fuels, blended cements, CO2 uptake through carbonation and Carbon Capture Storage (CCS). This paper discusses these measures but also others such as optimization of the concrete mix, optimization of the structural geometry and prolongation of the service life. The paper is ended by a section on adaptation since concrete will also have an important role concerning protection of the built environment for climate change. Protection structures against flood, reconstruction of dams, new waste-water systems and bright permeable concrete pavements reflecting sunlight and improving drainage after heavy rain constitute some examples.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"40 1","pages":"79 - 87"},"PeriodicalIF":1.0,"publicationDate":"2020-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74020864","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract This study investigates the feasibility of using bauxite residue (BR) as supplementary cementitious material (SCM) for the cement and concrete industry. It is shown from pastes of BR and calcium hydroxide, that BR is highly pozzolanic in nature. The early hydration of cement pastes with BR is accelerated while long-term strength is reduced probably due to the alkaline nature of BR. To be used as cement replacement material in concrete, attempts have been made to reduce the alkali content of BR, in particular to reduce the chance of alkali-aggregate reactions. Co-calcination of BR with kaolin or washing and cooking of BR with calcium hydroxide or calcium hydroxide and gypsum resulted in considerable reduction of alkali content; up to 75%. At the same time the reactivity of the BR was reduced but still being higher compared to fly ash already used in the cement industry.
{"title":"Bauxite Residue as Supplementary Cementitious Material – Efforts to Reduce the Amount of Soluble Sodium","authors":"Tobias Danner, H. Justnes","doi":"10.2478/ncr-2020-0001","DOIUrl":"https://doi.org/10.2478/ncr-2020-0001","url":null,"abstract":"Abstract This study investigates the feasibility of using bauxite residue (BR) as supplementary cementitious material (SCM) for the cement and concrete industry. It is shown from pastes of BR and calcium hydroxide, that BR is highly pozzolanic in nature. The early hydration of cement pastes with BR is accelerated while long-term strength is reduced probably due to the alkaline nature of BR. To be used as cement replacement material in concrete, attempts have been made to reduce the alkali content of BR, in particular to reduce the chance of alkali-aggregate reactions. Co-calcination of BR with kaolin or washing and cooking of BR with calcium hydroxide or calcium hydroxide and gypsum resulted in considerable reduction of alkali content; up to 75%. At the same time the reactivity of the BR was reduced but still being higher compared to fly ash already used in the cement industry.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"31 1","pages":"1 - 20"},"PeriodicalIF":1.0,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75012938","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Crack formation in concrete structures due to various load and non-load factors leading to degradation of service life is very common. Repair and maintenance operations are, therefore, necessary to prevent cracks propagating and reducing the service life of the structures. Accessibility to affected areas can, however, be difficult as the reconstruction and maintenance of concrete buildings are expensive in labour and capital. Autonomous healing by encapsulated bacteria-based self-healing agents is a possible solution. During this process, the bacteria are released from a broken capsule or triggered by water and oxygen access. However, its performance and reliability depend on continuous water supply, protection against the harsh environment, and densification of the cementitious matrix for the bacteria to act. There are vast methods of encapsulating bacteria and the most common carriers used are: encapsulation in polymeric materials, lightweight aggregates, cementitious materials, special minerals, nanomaterials, and waste-derived biomass. Self-healing efficiency of these encapsulated technologies can be assessed through many experimental methodologies according to the literature. These experimental evaluations are performed in terms of quantification of crackhealing, recovery of durability and mechanical properties (macro-level test) and characterization of precipitated crystals by healing agent (micro-level test). Until now, quantification of crack-healing by light microscopy revealed maximum crack width of 1.80mm healed. All research methods available for assesing self-healing efficiency of bacteria-based healing agents are worth reviewing in order to include a coherent, if not standardized framework testing system and a comparative evaluation for a novel incorporated bacteria-based healing agent.
{"title":"Encapsulation Techniques and Test Methods of Evaluating the Bacteria-Based Self-Healing Efficiency of Concrete: A Literature Review","authors":"R. Roy, E. Rossi, J. Silfwerbrand, H. Jonkers","doi":"10.2478/ncr-2020-0006","DOIUrl":"https://doi.org/10.2478/ncr-2020-0006","url":null,"abstract":"Abstract Crack formation in concrete structures due to various load and non-load factors leading to degradation of service life is very common. Repair and maintenance operations are, therefore, necessary to prevent cracks propagating and reducing the service life of the structures. Accessibility to affected areas can, however, be difficult as the reconstruction and maintenance of concrete buildings are expensive in labour and capital. Autonomous healing by encapsulated bacteria-based self-healing agents is a possible solution. During this process, the bacteria are released from a broken capsule or triggered by water and oxygen access. However, its performance and reliability depend on continuous water supply, protection against the harsh environment, and densification of the cementitious matrix for the bacteria to act. There are vast methods of encapsulating bacteria and the most common carriers used are: encapsulation in polymeric materials, lightweight aggregates, cementitious materials, special minerals, nanomaterials, and waste-derived biomass. Self-healing efficiency of these encapsulated technologies can be assessed through many experimental methodologies according to the literature. These experimental evaluations are performed in terms of quantification of crackhealing, recovery of durability and mechanical properties (macro-level test) and characterization of precipitated crystals by healing agent (micro-level test). Until now, quantification of crack-healing by light microscopy revealed maximum crack width of 1.80mm healed. All research methods available for assesing self-healing efficiency of bacteria-based healing agents are worth reviewing in order to include a coherent, if not standardized framework testing system and a comparative evaluation for a novel incorporated bacteria-based healing agent.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"72 1","pages":"63 - 85"},"PeriodicalIF":1.0,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79584557","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
L. Strömberg, J. Silfwerbrand, A. Ansell, S. Hintze
Abstract Despite the new Swedish client requirement to reduce the climate impact from the construction of roads, there has been relatively little research so far on how the optimization measures regarding the environmental impact of road pavements can be integrated in the traditional design. An increase in axle weights, changes of the traditional ways of travel, e.g. the use of automated and guided vehicles, and stricter customer requirements on reducing the climate impact require new approaches to steer the road and pavement industry towards more climate neutral solutions. This paper analyzes the latest standards for sustainability assessment of engineering works in an attempt to adjust these standards for assessing various road design options in a comparable and fair way, also when various materials are included.
{"title":"Making Concrete Pavements Competitive by Using the Standardized Framework for Comparisons of Infrastructure Projects in Terms of Cost-Efficiency and Climate Impact","authors":"L. Strömberg, J. Silfwerbrand, A. Ansell, S. Hintze","doi":"10.2478/ncr-2020-0004","DOIUrl":"https://doi.org/10.2478/ncr-2020-0004","url":null,"abstract":"Abstract Despite the new Swedish client requirement to reduce the climate impact from the construction of roads, there has been relatively little research so far on how the optimization measures regarding the environmental impact of road pavements can be integrated in the traditional design. An increase in axle weights, changes of the traditional ways of travel, e.g. the use of automated and guided vehicles, and stricter customer requirements on reducing the climate impact require new approaches to steer the road and pavement industry towards more climate neutral solutions. This paper analyzes the latest standards for sustainability assessment of engineering works in an attempt to adjust these standards for assessing various road design options in a comparable and fair way, also when various materials are included.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"26 1","pages":"21 - 39"},"PeriodicalIF":1.0,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84030549","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Several inspection methods can be used to assess the corrosion state of steel reinforcement in concrete. Especially for periodical field surveys and monitoring, non-destructive testing (NDT) methods are to be preferred as they do not cause any or very limited damage to the existing concrete. In this paper, the corrosion state of three reinforced concrete beams exposed to marine environment for 25 years was evaluated by measuring three parameters; electrochemical potential, concrete resistivity and corrosion rate. The measurements were performed with commercial devices. It was found that all devices are applicable for field inspections. Among the methods selected for the study, the electrochemical potential measured in a fine grid and analysed statistically offered the best possibility of evaluating the corrosion state; preferably in combination with selected excavations for determination of the level of corrosion.
{"title":"Non-destructive Test Methods for Corrosion Detection in Reinforced Concrete Structures","authors":"Hornbostel Karla, Tobias Danner, M. Geiker","doi":"10.2478/ncr-2019-0005","DOIUrl":"https://doi.org/10.2478/ncr-2019-0005","url":null,"abstract":"Abstract Several inspection methods can be used to assess the corrosion state of steel reinforcement in concrete. Especially for periodical field surveys and monitoring, non-destructive testing (NDT) methods are to be preferred as they do not cause any or very limited damage to the existing concrete. In this paper, the corrosion state of three reinforced concrete beams exposed to marine environment for 25 years was evaluated by measuring three parameters; electrochemical potential, concrete resistivity and corrosion rate. The measurements were performed with commercial devices. It was found that all devices are applicable for field inspections. Among the methods selected for the study, the electrochemical potential measured in a fine grid and analysed statistically offered the best possibility of evaluating the corrosion state; preferably in combination with selected excavations for determination of the level of corrosion.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"60 1","pages":"41 - 61"},"PeriodicalIF":1.0,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84874758","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The article addresses the modelling of the maturity of concrete. The apparent activation energy is the backbone of the Arrhenius model, which is typically used to model the maturity of concrete. The maturity (or the equivalent age) is influenced by the curing temperature and it is applied when modelling the hydration process and the hardening of concrete for instance in order to forecast the early-age strength to determine the time for removal of formwork or the time for prestressing. Part 1 of the article describes the background for the maturity model and the tests carried out as part of a large test programme at the DTI concrete lab. The tests were applying iso-thermal curing temperatures from 5°C to 60°C for various durations before measuring the compressive strength. Part 2 of the article presents a model for the activation energy based on these test results. An alternative formulation of the maturity model is suggested and compared with other similar concrete tests found in the literature for early-age strengths. The alternative model is shown to give better accuracy when modelling the early-age strengths of concrete. The tests include five different concretes, using three different cement types and the addition of fly ash.
{"title":"Activation Energy for the Concrete Maturity Model – Part 2: New Model for Temperature Dependent Ea","authors":"C. V. Nielsen","doi":"10.2478/ncr-2020-0010","DOIUrl":"https://doi.org/10.2478/ncr-2020-0010","url":null,"abstract":"Abstract The article addresses the modelling of the maturity of concrete. The apparent activation energy is the backbone of the Arrhenius model, which is typically used to model the maturity of concrete. The maturity (or the equivalent age) is influenced by the curing temperature and it is applied when modelling the hydration process and the hardening of concrete for instance in order to forecast the early-age strength to determine the time for removal of formwork or the time for prestressing. Part 1 of the article describes the background for the maturity model and the tests carried out as part of a large test programme at the DTI concrete lab. The tests were applying iso-thermal curing temperatures from 5°C to 60°C for various durations before measuring the compressive strength. Part 2 of the article presents a model for the activation energy based on these test results. An alternative formulation of the maturity model is suggested and compared with other similar concrete tests found in the literature for early-age strengths. The alternative model is shown to give better accuracy when modelling the early-age strengths of concrete. The tests include five different concretes, using three different cement types and the addition of fly ash.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"41 1","pages":"107 - 124"},"PeriodicalIF":1.0,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84180712","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The article addresses the modelling of the maturity of concrete. The apparent activation energy is the backbone of the Arrhenius model, which is typically used to model the maturity of concrete. The maturity (or the equivalent age) is influenced by the curing temperature and it is applied when modelling the hydration process and the hardening of concrete for instance in order to forecast the early-age strength to determine the time for removal of formwork or the time for prestressing. Part 1 of the article describes the background for the maturity model and the test series carried out at the DTI concrete lab. Laboratory tests at different curing temperatures (from 5°C to 60°C) are presented and the compressive strength results are modelled according to the original Freiesleben Hansen and Pedersen maturity model that has been applied in the field for many years. The tests include five different concretes, using three different cement types and the addition of fly ash. There are significant differences especially when considering the later-age strength modelling at either low temperatures or at high temperature curing.
{"title":"Activation Energy for the Concrete Maturity Model – Part 1: Compressive Strength Tests at Different Curing Temperatures","authors":"C. V. Nielsen, M. Kaasgaard","doi":"10.2478/ncr-2020-0002","DOIUrl":"https://doi.org/10.2478/ncr-2020-0002","url":null,"abstract":"Abstract The article addresses the modelling of the maturity of concrete. The apparent activation energy is the backbone of the Arrhenius model, which is typically used to model the maturity of concrete. The maturity (or the equivalent age) is influenced by the curing temperature and it is applied when modelling the hydration process and the hardening of concrete for instance in order to forecast the early-age strength to determine the time for removal of formwork or the time for prestressing. Part 1 of the article describes the background for the maturity model and the test series carried out at the DTI concrete lab. Laboratory tests at different curing temperatures (from 5°C to 60°C) are presented and the compressive strength results are modelled according to the original Freiesleben Hansen and Pedersen maturity model that has been applied in the field for many years. The tests include five different concretes, using three different cement types and the addition of fly ash. There are significant differences especially when considering the later-age strength modelling at either low temperatures or at high temperature curing.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"10 1","pages":"106 - 87"},"PeriodicalIF":1.0,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76685139","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Bonded concrete overlays (BCO) on bridge decks are beneficial solutions due to their superior properties as compared to the typical asphalt pavement. A significant number of overlays suffer however, from occurrence of cracks and delamination due to poor bond, and restrained shrinkage and thermal dilation. Over the past years different appraisals for estimation of the restrained deformations have been developed, from micro-scale models, based on poromechanics, to empirical equations as given in B3 or B4 models suggested by Bažant. This paper provides a short overview of calculation models along with a brief theoretical explanation of shrinkage mechanism.
{"title":"Bonded Concrete Overlays: A Brief Discussion on Restrained Shrinkage Deformations and Their Prediction Models","authors":"Wojciech Cyron, M. Nilsson, M. Emborg, U. Ohlsson","doi":"10.2478/ncr-2019-0019","DOIUrl":"https://doi.org/10.2478/ncr-2019-0019","url":null,"abstract":"Abstract Bonded concrete overlays (BCO) on bridge decks are beneficial solutions due to their superior properties as compared to the typical asphalt pavement. A significant number of overlays suffer however, from occurrence of cracks and delamination due to poor bond, and restrained shrinkage and thermal dilation. Over the past years different appraisals for estimation of the restrained deformations have been developed, from micro-scale models, based on poromechanics, to empirical equations as given in B3 or B4 models suggested by Bažant. This paper provides a short overview of calculation models along with a brief theoretical explanation of shrinkage mechanism.","PeriodicalId":42762,"journal":{"name":"Nordic Concrete Research","volume":"6 1","pages":"107 - 129"},"PeriodicalIF":1.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75421732","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：