Pub Date : 2022-06-02DOI: 10.47709/brilliance.v2i2.1534
Jhonatan Andreas Sinaga
In this research, a point to point access is designed on an optical communication network to see the performance parameters of bit error rate and q-factor. The research was conducted using OptiSystem software version 17, with design specifications such as a wavelength of 1555 nm, a range of 100 km, a number of 40 channels, and a frequency of 100 GHz. In this study, the best BER (Bit Error Rate) value was 10-6. Meanwhile, the Q-factor value is 4.8, which means that the Q-factor value has met the standard if it is seen from the BER value obtained. There are several factors that have a major influence on the design of fiber optic networks, such as power, amplifier specifications and bandwidth values. To minimize the enlargement of the BER (Bit Error Rate) and Q-factor values ??that come out.
{"title":"Design of Point to Point Access Using Dense Wavelength Divison Multiplexing","authors":"Jhonatan Andreas Sinaga","doi":"10.47709/brilliance.v2i2.1534","DOIUrl":"https://doi.org/10.47709/brilliance.v2i2.1534","url":null,"abstract":"In this research, a point to point access is designed on an optical communication network to see the performance parameters of bit error rate and q-factor. The research was conducted using OptiSystem software version 17, with design specifications such as a wavelength of 1555 nm, a range of 100 km, a number of 40 channels, and a frequency of 100 GHz. In this study, the best BER (Bit Error Rate) value was 10-6. Meanwhile, the Q-factor value is 4.8, which means that the Q-factor value has met the standard if it is seen from the BER value obtained. There are several factors that have a major influence on the design of fiber optic networks, such as power, amplifier specifications and bandwidth values. To minimize the enlargement of the BER (Bit Error Rate) and Q-factor values ??that come out.","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"116 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116974402","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-01DOI: 10.47709/brilliance.v2i1.1540
Faisal Arrasyid
This study analyzes the performance of PNP phototransistors made of Gallium Arsenide (GaAs) and Silicon (Si). Based on the analysis for gallium arsenide and silicon PNP phototransistors, the emitter current at the output is greater than the photon current at the incident. With?= 1017?3;?= 1016?3and?= 1019?3;?= 1016?3The input current for GaAs material is 1.6865×10?7 ., respectively?and 8.0331×10?6A. With the addition of internal gain on the GaAs material, namely; common-base internal gain (?)= 0.9991; 0.8974 and the common-emitter internal gain(?)=1125; 8.7488, then each output current is 1.8973×10?4?and 7.028×10?5?. With the addition of the internal gain on the phototransistor, we get SNR = 26256 and 8022.As for the silicone material with?= 1017m3;?= 1016?3and?= 1019?3;?= 1016?3the input current and output current are respectively 1.0766×10?7?and 1,266×10?6?. With the internal gain on the silicon material, namely; for common-base internal gain(?)=0.9994; 0.9220 and the common-emitter internal gain(?)= 1563; 11,818, then the output currents are 1.6831×10?4A and 1.4827×10?5A, respectively. With the addition of the internal gain, the SNR for silicon is 8.3766×10?5 and 3.3609×10?6, respectively.
{"title":"Analysis of the Effect of Adding PNP Phototransistors on Fiber Optic Systems","authors":"Faisal Arrasyid","doi":"10.47709/brilliance.v2i1.1540","DOIUrl":"https://doi.org/10.47709/brilliance.v2i1.1540","url":null,"abstract":"This study analyzes the performance of PNP phototransistors made of Gallium Arsenide (GaAs) and Silicon (Si). Based on the analysis for gallium arsenide and silicon PNP phototransistors, the emitter current at the output is greater than the photon current at the incident. With?= 1017?3;?= 1016?3and?= 1019?3;?= 1016?3The input current for GaAs material is 1.6865×10?7 ., respectively?and 8.0331×10?6A. With the addition of internal gain on the GaAs material, namely; common-base internal gain (?)= 0.9991; 0.8974 and the common-emitter internal gain(?)=1125; 8.7488, then each output current is 1.8973×10?4?and 7.028×10?5?. With the addition of the internal gain on the phototransistor, we get SNR = 26256 and 8022.As for the silicone material with?= 1017m3;?= 1016?3and?= 1019?3;?= 1016?3the input current and output current are respectively 1.0766×10?7?and 1,266×10?6?. With the internal gain on the silicon material, namely; for common-base internal gain(?)=0.9994; 0.9220 and the common-emitter internal gain(?)= 1563; 11,818, then the output currents are 1.6831×10?4A and 1.4827×10?5A, respectively. With the addition of the internal gain, the SNR for silicon is 8.3766×10?5 and 3.3609×10?6, respectively.","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"56 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115654819","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-01DOI: 10.47709/brilliance.v2i2.1541
H. Ibrahim, N. A. M. Alawkally, M. A. Ali, A. M. Al-awkally, N. M. Al-awkally, Aejeeliyah Yousuf
Viral hepatitis constitutes a global health problem; previous studies have affirmed a considerable morbidity and mortality from both acute infections and chronic complications. On the other hand, Human Immunodeficiency Virus (HIV) infection is also of known burden. Determining prevalence measures of these viruses is crucial for establishing appropriate country specific strategies regarding prevention, diagnosis, and containment. The data for this research were records from 2-year period from 20-2018, a total of 1.968 cases were collected from two years. In 2017, a total of 696, (429) Libyan and (267) expatriate, only one infected Libyan and expatriate equally with HCV in June. A total of 1272 cases in 2018, 543 were no Libyan cases with viral infection and 729 Expatriates recorded infection with 8 cases (3 HBSAg and 5 HCV) in November, 7 (one cases with HIV, two cases with HBSAg and 4 cases with HCV). According to the seasons, HIV was recorded with one case (10) in the autumn while the highest HBSAg infected was observed in autumn 5 (50%) followed by summer 4 (40%) and the highest HCV infected was recorded in autumn 9 (90%) followed by summer 3 (30%) and winter 1 (10%).
{"title":"Hepatitis B virus, hepatitis C virus and human immunodeficiency virus infection in Expatriate workers and Libyan people in Darna","authors":"H. Ibrahim, N. A. M. Alawkally, M. A. Ali, A. M. Al-awkally, N. M. Al-awkally, Aejeeliyah Yousuf","doi":"10.47709/brilliance.v2i2.1541","DOIUrl":"https://doi.org/10.47709/brilliance.v2i2.1541","url":null,"abstract":"Viral hepatitis constitutes a global health problem; previous studies have affirmed a considerable morbidity and mortality from both acute infections and chronic complications. On the other hand, Human Immunodeficiency Virus (HIV) infection is also of known burden. Determining prevalence measures of these viruses is crucial for establishing appropriate country specific strategies regarding prevention, diagnosis, and containment. The data for this research were records from 2-year period from 20-2018, a total of 1.968 cases were collected from two years. In 2017, a total of 696, (429) Libyan and (267) expatriate, only one infected Libyan and expatriate equally with HCV in June. A total of 1272 cases in 2018, 543 were no Libyan cases with viral infection and 729 Expatriates recorded infection with 8 cases (3 HBSAg and 5 HCV) in November, 7 (one cases with HIV, two cases with HBSAg and 4 cases with HCV). According to the seasons, HIV was recorded with one case (10) in the autumn while the highest HBSAg infected was observed in autumn 5 (50%) followed by summer 4 (40%) and the highest HCV infected was recorded in autumn 9 (90%) followed by summer 3 (30%) and winter 1 (10%). ","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123713440","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-01DOI: 10.47709/brilliance.v2i1.1535
Ruth Shyintia Rouli Marpaung
Room insecurity such as cases of theft or fire can occur, especially in rooms that are not equipped with special security and guard systems. Based on this, it is necessary to develop a security system that can be accessed and monitored remotely and provides early warning of early indications of danger using smartphones. System development is carried out through the stages of making software and hardware. The hardware consists of Arduino Mega 2560 to manage the system, MySQL Database Server, CC3000 Wifi Shield as a communication device between Arduino and the server, Limit Switch to detect a forced push on the door, MQ-2 measuring gas leaks in the room, DHT-11 sensor to measure the room temperature, VC0706 camera to capture images in the door area. Android application as a system interface to change lock status and monitor room conditions. A warning notification of the danger indication of a gas leak is sent to the user's smartphone by displaying the value of the gas content. The warning message of a forced push on the door is equipped with a feature to display camera captures. The final result of this research is that a room security system has been successfully created where access to door locks and room monitoring can be done through an android application installed on a smartphone. The system can provide a hazard warning message well. The warning message of a forced push on the door is equipped with a feature to display camera captures. The final result of this research is that a room security system has been successfully created where access to door locks and room monitoring can be done through an android application installed on a smartphone. The system can provide a hazard warning message well. The warning message of a forced push on the door is equipped with a feature to display camera captures. The final result of this research is that a room security system has been successfully created where access to door locks and room monitoring can be done through an android application installed on a smartphone. The system can provide a hazard warning message well.
房间不安全，如盗窃或火灾的情况可能发生，特别是在没有配备特殊的安全和警卫系统的房间。在此基础上，有必要开发可以远程访问和监控的安全系统，并利用智能手机对早期危险迹象进行预警。系统的开发是通过软件和硬件的制作阶段来完成的。硬件部分由Arduino Mega 2560管理系统，MySQL数据库服务器，CC3000 Wifi Shield作为Arduino与服务器之间的通信设备，限位开关检测强行推门，MQ-2测量房间气体泄漏，DHT-11传感器测量房间温度，VC0706摄像机捕捉门区图像。Android应用程序作为系统接口来改变锁状态和监控房间状况。气体泄漏危险指示的警告通知通过显示气体含量的值发送到用户的智能手机。强行推门的警告信息配备了显示摄像头捕获的功能。这项研究的最终结果是成功创建了一个房间安全系统，通过安装在智能手机上的android应用程序可以访问门锁和房间监控。该系统能很好地提供危险预警信息。强行推门的警告信息配备了显示摄像头捕获的功能。这项研究的最终结果是成功创建了一个房间安全系统，通过安装在智能手机上的android应用程序可以访问门锁和房间监控。该系统能很好地提供危险预警信息。强行推门的警告信息配备了显示摄像头捕获的功能。这项研究的最终结果是成功创建了一个房间安全系统，通过安装在智能手机上的android应用程序可以访问门锁和房间监控。该系统能很好地提供危险预警信息。
{"title":"Android Based Door Security Design","authors":"Ruth Shyintia Rouli Marpaung","doi":"10.47709/brilliance.v2i1.1535","DOIUrl":"https://doi.org/10.47709/brilliance.v2i1.1535","url":null,"abstract":"Room insecurity such as cases of theft or fire can occur, especially in rooms that are not equipped with special security and guard systems. Based on this, it is necessary to develop a security system that can be accessed and monitored remotely and provides early warning of early indications of danger using smartphones. System development is carried out through the stages of making software and hardware. The hardware consists of Arduino Mega 2560 to manage the system, MySQL Database Server, CC3000 Wifi Shield as a communication device between Arduino and the server, Limit Switch to detect a forced push on the door, MQ-2 measuring gas leaks in the room, DHT-11 sensor to measure the room temperature, VC0706 camera to capture images in the door area. Android application as a system interface to change lock status and monitor room conditions. A warning notification of the danger indication of a gas leak is sent to the user's smartphone by displaying the value of the gas content. The warning message of a forced push on the door is equipped with a feature to display camera captures. The final result of this research is that a room security system has been successfully created where access to door locks and room monitoring can be done through an android application installed on a smartphone. The system can provide a hazard warning message well. The warning message of a forced push on the door is equipped with a feature to display camera captures. The final result of this research is that a room security system has been successfully created where access to door locks and room monitoring can be done through an android application installed on a smartphone. The system can provide a hazard warning message well. The warning message of a forced push on the door is equipped with a feature to display camera captures. The final result of this research is that a room security system has been successfully created where access to door locks and room monitoring can be done through an android application installed on a smartphone. The system can provide a hazard warning message well.","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124788181","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-31DOI: 10.47709/brilliance.v2i1.1536
Alexander Tommy
The role of gas at this time is very important for human life. The use of gas is expanding from household, industrial to transportation needs.Remember the depletion of petroleum supplies. This makes gas as an alternative fuel to replace the main role of petroleum. The risk of using gas as fuel is the occurrence of gas leaks which can have an impact on large-scale fires. A detection system is designed to detect gas leaks with the MQ-6 sensor and solenoid valve to close the gas line. The research was conducted by testing the voltage from the sensor using a predetermined program. The maximum reading distance from the gas sensor is 18 cm with a time of 45.26 seconds based on tests carried out by narrowing the gas exit path to provide a faster rate effect so that the sensor can detect gas.
{"title":"Implementation of a Gas Leakage Detection System Using the MQ-6 Sensor","authors":"Alexander Tommy","doi":"10.47709/brilliance.v2i1.1536","DOIUrl":"https://doi.org/10.47709/brilliance.v2i1.1536","url":null,"abstract":"The role of gas at this time is very important for human life. The use of gas is expanding from household, industrial to transportation needs.Remember the depletion of petroleum supplies. This makes gas as an alternative fuel to replace the main role of petroleum. The risk of using gas as fuel is the occurrence of gas leaks which can have an impact on large-scale fires. A detection system is designed to detect gas leaks with the MQ-6 sensor and solenoid valve to close the gas line. The research was conducted by testing the voltage from the sensor using a predetermined program. The maximum reading distance from the gas sensor is 18 cm with a time of 45.26 seconds based on tests carried out by narrowing the gas exit path to provide a faster rate effect so that the sensor can detect gas.","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125019437","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-31DOI: 10.47709/brilliance.v2i1.1507
Aldi Satria Budi
In this study, an automatic garden watering device was designed using a solar cell composed of semiconductors that function to convert sunlight into electric power directly. The additional equipment used is a timer, BCU, rain sensor, relay, and inverter. The purpose of the design and design of this tool is to determine the performance of the automatic garden watering design by utilizing solar cells as a voltage source, as well as to find out how the control system works by incorporating rain sensors when watering plants optimally so that it can be utilized by the community. . As for the test results when the solla cel without using a load, the resulting voltage is 15 volts, the resulting current is 1.5 amperes. When a load is used, the resulting voltage decreases to 11.5 volts, the current increases to 5.73 amperes. The output voltage and current with the inverter are 214 volts and 1.05 amperes, respectively. When measurements were made, the voltage and current produced by the battery were 11.8 volts and current 7.8 amperes, respectively, while the voltage increased and current decreased in the inverter were 221 volts and 0.81 amperes, respectively.
{"title":"Design of Automatic Garden Watering Based on Solar Cell","authors":"Aldi Satria Budi","doi":"10.47709/brilliance.v2i1.1507","DOIUrl":"https://doi.org/10.47709/brilliance.v2i1.1507","url":null,"abstract":"In this study, an automatic garden watering device was designed using a solar cell composed of semiconductors that function to convert sunlight into electric power directly. The additional equipment used is a timer, BCU, rain sensor, relay, and inverter. The purpose of the design and design of this tool is to determine the performance of the automatic garden watering design by utilizing solar cells as a voltage source, as well as to find out how the control system works by incorporating rain sensors when watering plants optimally so that it can be utilized by the community. . As for the test results when the solla cel without using a load, the resulting voltage is 15 volts, the resulting current is 1.5 amperes. When a load is used, the resulting voltage decreases to 11.5 volts, the current increases to 5.73 amperes. The output voltage and current with the inverter are 214 volts and 1.05 amperes, respectively. When measurements were made, the voltage and current produced by the battery were 11.8 volts and current 7.8 amperes, respectively, while the voltage increased and current decreased in the inverter were 221 volts and 0.81 amperes, respectively.","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"90 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125997821","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-20DOI: 10.47709/brilliance.v2i1.1456
Mursidah Mursidah, H. Setiawan, M. K. Harahap, A. Yunan, D. N. Ilham
The rapid advancement of technology has led to significant changes in human life. There are numerous tools available, many of which are intended to make human work easier. Science and technology develop, resulting in improved innovations. Automatic control systems have recently advanced at a dizzying pace in the areas of science and technology. This is shown by the variety of applications, which range from residential to sophisticated equipment. GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Ambient light for Arduino is a concept that arose in response to the demands of home automation systems. It is Arduino-based and has light intensity controls. The house's tenants will profit from the renovation. Simply said, the curtains are open while the light intensity is 271 - 1000 lux, closed when the light intensity is 1001 lux and closed when the light intensity is 270 lux so that the light entering the room is not too bright and does not create The room felt hot from too much exposure to the sun. In the age of modernization, this tool is supposed to boost the mobility of the house's occupants.
科技的飞速发展给人类生活带来了巨大的变化。有许多可用的工具，其中许多旨在使人类的工作更容易。科技发展，创新能力增强。自动控制系统最近在科学技术领域取得了令人眼花缭乱的进展。从住宅到复杂设备的各种应用都表明了这一点。GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Ambient light for Arduino是响应家庭自动化系统需求而产生的概念。它是基于arduino的，并具有光强度控制。这房子的房客将从整修中获利。简单地说，窗帘在271 - 1000勒克斯光强时打开，在1001勒克斯光强时关闭，在270勒克斯光强时关闭，这样进入房间的光线就不会太亮，也不会因为过多地暴露在阳光下而使房间感到热。在现代化时代，这种工具被认为可以提高房屋居住者的流动性。
{"title":"Arduino Based Light Intensity Auto Curtain","authors":"Mursidah Mursidah, H. Setiawan, M. K. Harahap, A. Yunan, D. N. Ilham","doi":"10.47709/brilliance.v2i1.1456","DOIUrl":"https://doi.org/10.47709/brilliance.v2i1.1456","url":null,"abstract":"The rapid advancement of technology has led to significant changes in human life. There are numerous tools available, many of which are intended to make human work easier. Science and technology develop, resulting in improved innovations. Automatic control systems have recently advanced at a dizzying pace in the areas of science and technology. This is shown by the variety of applications, which range from residential to sophisticated equipment. GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Ambient light for Arduino is a concept that arose in response to the demands of home automation systems. It is Arduino-based and has light intensity controls. The house's tenants will profit from the renovation. Simply said, the curtains are open while the light intensity is 271 - 1000 lux, closed when the light intensity is 1001 lux and closed when the light intensity is 270 lux so that the light entering the room is not too bright and does not create The room felt hot from too much exposure to the sun. In the age of modernization, this tool is supposed to boost the mobility of the house's occupants.","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121043580","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-12-27DOI: 10.47709/brilliance.v1i2.1300
H. Pratama, A. Yunan, Rudi Arif Candra
A suitable planting medium is a medium of good quality soil that can support plant growth quickly. Fertile soil is the primary need for plants. The quality of the planting medium dramatically affects plant growth. The types of soil needed for plant growth vary, namely sandy soil, red soil, alluvial soil, and humus soil. Using an NPK sensor that functions to detect nutrients in the soil and can work if the tip of the sensor is plugged into the soil they want to detect, the results detected by the sensor will be sent in the form of analog signal data to nodemcu, which will be processed and displayed on the screen. Thingspeak. This tool is controlled by nodemcu with an NPK sensor to detect nutrients in the soil with output to thingspeak. The function of the NPK sensor tool will measure the nutrients in the soil for citrus seedlings, and the results read by the Npk sensor will be sent to the Thingspeak web, making it easier for farmers to seed citrus seeds. The data read by the sensor will be sent to thingspeak, making it easier to monitor nutrients in the soil. From the results of the tests carried out, it is found that the nutrient content in wet soil is higher than in dry soil; from the tests carried out, the NPK sensor accuracy rate is 90%.
{"title":"Design and Build a Soil Nutrient Measurement Tool for Citrus Plants Using NPK Soil Sensors Based on the Internet of Things","authors":"H. Pratama, A. Yunan, Rudi Arif Candra","doi":"10.47709/brilliance.v1i2.1300","DOIUrl":"https://doi.org/10.47709/brilliance.v1i2.1300","url":null,"abstract":"A suitable planting medium is a medium of good quality soil that can support plant growth quickly. Fertile soil is the primary need for plants. The quality of the planting medium dramatically affects plant growth. The types of soil needed for plant growth vary, namely sandy soil, red soil, alluvial soil, and humus soil. Using an NPK sensor that functions to detect nutrients in the soil and can work if the tip of the sensor is plugged into the soil they want to detect, the results detected by the sensor will be sent in the form of analog signal data to nodemcu, which will be processed and displayed on the screen. Thingspeak. This tool is controlled by nodemcu with an NPK sensor to detect nutrients in the soil with output to thingspeak. The function of the NPK sensor tool will measure the nutrients in the soil for citrus seedlings, and the results read by the Npk sensor will be sent to the Thingspeak web, making it easier for farmers to seed citrus seeds. The data read by the sensor will be sent to thingspeak, making it easier to monitor nutrients in the soil. From the results of the tests carried out, it is found that the nutrient content in wet soil is higher than in dry soil; from the tests carried out, the NPK sensor accuracy rate is 90%.","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131979345","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-12-15DOI: 10.47709/brilliance.v1i2.1228
M. H. Santoso
Data mining can generally be defined as a technique for finding patterns (extraction) or interesting information in large amounts of data that have meaning for decision support. One of the well-known and commonly used association rule discovery data mining methods is the Apriori algorithm. The Association Rule and the Apriori Algorithm are two very prominent algorithms for finding a number of frequently occurring sets of items from transaction data stored in databases. The calculation is done to determine the minimum value of support and minimum confidence that will produce the association rule. The association rule is used to produce the percentage of purchasing activity for an itemset within a certain period of time using the RapidMiner software. The results of the test using the priori algorithm method show that the association rule, that customers often buy toothpaste and detergents that have met the minimum confidence value. By searching for patterns using this a priori algorithm, it is hoped that the resulting information can improve further sales strategies.
{"title":"Application of Association Rule Method Using Apriori Algorithm to Find Sales Patterns Case Study of Indomaret Tanjung Anom","authors":"M. H. Santoso","doi":"10.47709/brilliance.v1i2.1228","DOIUrl":"https://doi.org/10.47709/brilliance.v1i2.1228","url":null,"abstract":"Data mining can generally be defined as a technique for finding patterns (extraction) or interesting information in large amounts of data that have meaning for decision support. One of the well-known and commonly used association rule discovery data mining methods is the Apriori algorithm. The Association Rule and the Apriori Algorithm are two very prominent algorithms for finding a number of frequently occurring sets of items from transaction data stored in databases. The calculation is done to determine the minimum value of support and minimum confidence that will produce the association rule. The association rule is used to produce the percentage of purchasing activity for an itemset within a certain period of time using the RapidMiner software. The results of the test using the priori algorithm method show that the association rule, that customers often buy toothpaste and detergents that have met the minimum confidence value. By searching for patterns using this a priori algorithm, it is hoped that the resulting information can improve further sales strategies.","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125406009","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-12-03DOI: 10.47709/brilliance.v1i2.1217
Alfy Ariswan, D. N. Ilham, R. Candra, A. Budiansyah, Fauzun Atabiq
A high school is a place that is used as a place for the learning and teaching process, so a comfortable place is needed from disturbances in the study room. The Design System for Noise Monitoring Devices as an Effort to Minimize Noise Based on the Internet of Things (IoT) is designed to create comfort in the learning and teaching process at SMAN Tapaktuan so that teachers can concentrate without disturbing the noise generated by students. This tool is controlled by nodemcu and a sound sensor as a noise detector with an appropriate output by sending notifications to the Blynk Application. How the tool works when the sound sensor detects a noise level between 30 dB to 49 dB then dfplayer will issue a warning in the form of a warning "this room is noisy" and send a notification to the blynk application with the text form "room A is noisy" if the sensor detects above 50 dB then a warning loud sound will be issued by Dfplayer in the form of sound and at the same time send notifications to the blynk application. The purpose of the tool Any noise detected by the sound sensor then dfplayer will issue a small or loud warning and send a notification to the blynk application.
高中是一个用于学习和教学过程的地方，因此需要一个舒适的地方，不受自习室的干扰。基于物联网(IoT)的噪音监测设备设计系统旨在为SMAN Tapaktuan的学习和教学过程创造舒适，以便教师可以集中精力，而不会干扰学生产生的噪音。该工具由nodemcu和一个声音传感器控制，作为一个噪声检测器，通过向Blynk应用程序发送通知来提供适当的输出。工具如何工作时声音传感器检测之间的噪声级30 dB 49 dB dfplayer将发出警告的形式警告“这房间吵”,发送一个通知给blynk应用程序以文本形式“房间吵”,如果传感器检测到高于50 dB然后发出了响亮的声音将预警dfplayer以声音的形式同时发送通知给blynk应用程序。任何噪音检测到的声音传感器，然后dfplayer将发出一个小或大的警告，并发送一个通知到blynk应用程序。
{"title":"Identification Noise monitoring for students in SMAN 1 Tapaktuan","authors":"Alfy Ariswan, D. N. Ilham, R. Candra, A. Budiansyah, Fauzun Atabiq","doi":"10.47709/brilliance.v1i2.1217","DOIUrl":"https://doi.org/10.47709/brilliance.v1i2.1217","url":null,"abstract":"A high school is a place that is used as a place for the learning and teaching process, so a comfortable place is needed from disturbances in the study room. The Design System for Noise Monitoring Devices as an Effort to Minimize Noise Based on the Internet of Things (IoT) is designed to create comfort in the learning and teaching process at SMAN Tapaktuan so that teachers can concentrate without disturbing the noise generated by students. This tool is controlled by nodemcu and a sound sensor as a noise detector with an appropriate output by sending notifications to the Blynk Application. How the tool works when the sound sensor detects a noise level between 30 dB to 49 dB then dfplayer will issue a warning in the form of a warning \"this room is noisy\" and send a notification to the blynk application with the text form \"room A is noisy\" if the sensor detects above 50 dB then a warning loud sound will be issued by Dfplayer in the form of sound and at the same time send notifications to the blynk application. The purpose of the tool Any noise detected by the sound sensor then dfplayer will issue a small or loud warning and send a notification to the blynk application.","PeriodicalId":440433,"journal":{"name":"Brilliance: Research of Artificial Intelligence","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128280301","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：