An essential task in the open-pit mine optimizing process is determining the extraction time of material located in the ultimate pit, considering some operational and economic constraints. The proper design of pushbacks has a significant impact on the optimum production planning. On the other hand, some uncertainty sources such as in-situ grade cause both deviations from production and financial goals. This paper presents an extension of a multi-stage formulation for risk-based pushback designing that utilizes the ant colony optimization (ACO) algorithm to solve it. For more detailed studies, two different strategies were developed according to statistical and probabilistic issues. The data of Songun copper mine located in NW Iran was used to evaluate the ability of the proposed approach in controlling the risk of deviation from production targets and increasing the project value. The results indicated the effectiveness of the proposed approach in pushback designing based on geological uncertainty. Examining different strategies showed that the technique based on multiple probability produces better solutions.
{"title":"A NEW TECHNIQUE BASED ON ANT COLONY OPTIMIZATION FOR DESIGNING MINING PUSHBACKS IN THE PRESENCE OF GEOLOGICAL UNCERTAINTY","authors":"Seyyed-Omid Gilani, S. Moosazadeh, R. Poormirzaee","doi":"10.17794/rgn.2023.1.10","DOIUrl":"https://doi.org/10.17794/rgn.2023.1.10","url":null,"abstract":"An essential task in the open-pit mine optimizing process is determining the extraction time of material located in the ultimate pit, considering some operational and economic constraints. The proper design of pushbacks has a significant impact on the optimum production planning. On the other hand, some uncertainty sources such as in-situ grade cause both deviations from production and financial goals. This paper presents an extension of a multi-stage formulation for risk-based pushback designing that utilizes the ant colony optimization (ACO) algorithm to solve it. For more detailed studies, two different strategies were developed according to statistical and probabilistic issues. The data of Songun copper mine located in NW Iran was used to evaluate the ability of the proposed approach in controlling the risk of deviation from production targets and increasing the project value. The results indicated the effectiveness of the proposed approach in pushback designing based on geological uncertainty. Examining different strategies showed that the technique based on multiple probability produces better solutions.","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"1 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68154917","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
V. Kostenko, O. Bohomaz, T. Kostenko, A. Berezovskyi
Today there is not enough scientific data on the energy level and the velocity of an explosion in actual mine workings, which have a cross-sectional area larger than experimental mine workings. The objective of the paper is to justify the energy parameters of an explosion in actual mine workings based on the disclosure of the fire front development mechanism when coal dust explodes in an experimental mine working with a limited cross-sectional area. These studies can be the basis for choosing the speed of action and the strength of the means of the localization of dust explosions. The main research method is an experimental and analytical method, based on the analysis of the results of experimental explosions of coal dust in experimental mine workings and theoretical substantiation of the regularities of the development of the velocity and additional energy of the fire front with further extrapolation to the conditions of actual mine workings. It is proposed to supplement the mechanism of explosion development with an idea about the sections of development of explosion dynamics, i.e. initiation, dust explosion, crater, which determine the characteristic parameters of the explosive front velocity: maximum initiating velocity, average velocity, and maximum velocity in a crater. It was established that during methane initiation in the experimental mine working at the boundary between the initiation and dusting zones, there is a situation of a hybrid explosion of a mixture of methane and dust with air, which has its own velocity and energy indicators. A linear dependence of the energy generated during the coal aerosol explosion on the cross-sectional plane of the mine working was established. This makes it possible to use the results of testing the coal from certain deposits in small-scale experimental set-ups to justify the parameters of protective means for the actual mine workings.
{"title":"MECHANISM OF COAL AEROSOL EXPLOSION DEVELOPMENT IN AN EXPERIMENTAL MINE WORKING","authors":"V. Kostenko, O. Bohomaz, T. Kostenko, A. Berezovskyi","doi":"10.17794/rgn.2023.2.10","DOIUrl":"https://doi.org/10.17794/rgn.2023.2.10","url":null,"abstract":"Today there is not enough scientific data on the energy level and the velocity of an explosion in actual mine workings, which have a cross-sectional area larger than experimental mine workings. The objective of the paper is to justify the energy parameters of an explosion in actual mine workings based on the disclosure of the fire front development mechanism when coal dust explodes in an experimental mine working with a limited cross-sectional area. These studies can be the basis for choosing the speed of action and the strength of the means of the localization of dust explosions. The main research method is an experimental and analytical method, based on the analysis of the results of experimental explosions of coal dust in experimental mine workings and theoretical substantiation of the regularities of the development of the velocity and additional energy of the fire front with further extrapolation to the conditions of actual mine workings. It is proposed to supplement the mechanism of explosion development with an idea about the sections of development of explosion dynamics, i.e. initiation, dust explosion, crater, which determine the characteristic parameters of the explosive front velocity: maximum initiating velocity, average velocity, and maximum velocity in a crater. It was established that during methane initiation in the experimental mine working at the boundary between the initiation and dusting zones, there is a situation of a hybrid explosion of a mixture of methane and dust with air, which has its own velocity and energy indicators. A linear dependence of the energy generated during the coal aerosol explosion on the cross-sectional plane of the mine working was established. This makes it possible to use the results of testing the coal from certain deposits in small-scale experimental set-ups to justify the parameters of protective means for the actual mine workings.","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"1 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68156553","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Kononenko, O. Khomenko, I. Kovalenko, A. Kosenko, R. Zahorodnii, R. Dychkovskyi
Experimental methods for determining a performance index of explosives are analysed: the methods of a ballistic pendulum, ballistic mortar, a lead block, and according to the volume of soil explosion funnel. It is defined that the determination of a performance index of emulsion explosives (EE) involves a set of significant features connected with a large critical diameter requiring the experiments with large-mass charges and resulting in refusal from the traditional methods of determining a performance index. Analytical methods for calculating an index of relative performance of explosives are analysed. Determination of the performance indices of explosives with the help of analytical methods helps identify considerable differences in the calculation results; in case of emulsion explosives the results are erroneously low at all. It is since analytical methods do not consider the brisant action of emulsion explosives. This paper represents the developed methodology of determining a performance index of explosives according to the degree of detonation velocity. The proposed methodology considers the key energy and detonation characteristics of explosives: heat and volume of the explosion products, density (thickness), and detonation velocity. The use of analytical methodology for calculating a performance index for all explosive types makes it possible to get correct results that are necessary for designing the parameters of drilling and blasting operations.
{"title":"DETERMINING THE PERFORMANCE OF EXPLOSIVES FOR BLASTING MANAGEMENT","authors":"M. Kononenko, O. Khomenko, I. Kovalenko, A. Kosenko, R. Zahorodnii, R. Dychkovskyi","doi":"10.17794/rgn.2023.3.2","DOIUrl":"https://doi.org/10.17794/rgn.2023.3.2","url":null,"abstract":"Experimental methods for determining a performance index of explosives are analysed: the methods of a ballistic pendulum, ballistic mortar, a lead block, and according to the volume of soil explosion funnel. It is defined that the determination of a performance index of emulsion explosives (EE) involves a set of significant features connected with a large critical diameter requiring the experiments with large-mass charges and resulting in refusal from the traditional methods of determining a performance index. Analytical methods for calculating an index of relative performance of explosives are analysed. Determination of the performance indices of explosives with the help of analytical methods helps identify considerable differences in the calculation results; in case of emulsion explosives the results are erroneously low at all. It is since analytical methods do not consider the brisant action of emulsion explosives. This paper represents the developed methodology of determining a performance index of explosives according to the degree of detonation velocity. The proposed methodology considers the key energy and detonation characteristics of explosives: heat and volume of the explosion products, density (thickness), and detonation velocity. The use of analytical methodology for calculating a performance index for all explosive types makes it possible to get correct results that are necessary for designing the parameters of drilling and blasting operations.","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"1 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68157867","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ž. Veinović, Helena Vučenović, Ivana Rožman, Galla Uroić
Given the forthcoming need for the construction of a repository for low and intermediate radioactive level waste in the Republic of Croatia, this paper proposes a repository design which is, from a geotechnical point of view, simple, practical and safe, and significantly improved considering current conceptual designs. Existing low and intermediate radioactive level waste repositories are mostly vault-type, near-surface constructions with some kind of covering (top) system of protective layers. However, most of these repositories do not have a bottom protective system, apart from concrete flooring (base). The reasons for such designs include the presumed longevity of the waste packages (containers), which are mostly reinforced concrete and/or steel containers. Considering that the concrete is a material which will, under certain conditions, deteriorate (e.g. dissolution of the cement matrix), and so potentially release radionuclides to the environment, it is essential to design the repository in such a manner that all forms of early release of radionuclides are prevented. The improved conceptual design of low and intermediate radioactive level waste repository presented in this paper is intended to provide an improved containment of radionuclides from waste and ensure the long term safety of the repository. This paper is the first in a series which will cover the basic design of the repository, systems of protective layers and preliminary slope stability analyses.
{"title":"IMPROVED CONCEPTUAL DESIGN OF LILW REPOSITORY","authors":"Ž. Veinović, Helena Vučenović, Ivana Rožman, Galla Uroić","doi":"10.17794/rgn.2023.1.11","DOIUrl":"https://doi.org/10.17794/rgn.2023.1.11","url":null,"abstract":"Given the forthcoming need for the construction of a repository for low and intermediate radioactive level waste in the Republic of Croatia, this paper proposes a repository design which is, from a geotechnical point of view, simple, practical and safe, and significantly improved considering current conceptual designs. Existing low and intermediate radioactive level waste repositories are mostly vault-type, near-surface constructions with some kind of covering (top) system of protective layers. However, most of these repositories do not have a bottom protective system, apart from concrete flooring (base). The reasons for such designs include the presumed longevity of the waste packages (containers), which are mostly reinforced concrete and/or steel containers. Considering that the concrete is a material which will, under certain conditions, deteriorate (e.g. dissolution of the cement matrix), and so potentially release radionuclides to the environment, it is essential to design the repository in such a manner that all forms of early release of radionuclides are prevented. The improved conceptual design of low and intermediate radioactive level waste repository presented in this paper is intended to provide an improved containment of radionuclides from waste and ensure the long term safety of the repository. This paper is the first in a series which will cover the basic design of the repository, systems of protective layers and preliminary slope stability analyses.","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"1 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68155021","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A.M. Shohda, W. Draz, Faisal A Ali, M. A. Yassien, Mahrous A. M. Ali
The nature of ornamental stones is anisotropic. The heterogeneous characteristics of the anisotropic rocks vary with direction. The highest to lowest strength ratio is known as the anisotropy strength index (ASI). A thorough investigation of the ASI is necessary to determine the best-directed loads for these rocks. On core specimens that have been bored parallel and perpendicular to the weakness planes, this is estimated using both uniaxial compression and point load testing. For this examination, four different rock types had cores that were drilled conventionally and in line with weakness planes. The research shows that drilling cores to weakness planes at a normal or nearly normal angle (90° to 60°) yields the best, most dependable ASI. According to the current study’s findings, the ASI fluctuates depending on how uniformly the mineral content and texture of rocks are. A suggested way to calculate the ASI and the load point strength is also included. This study reveals that the employment of ornamental stone as is (for example, precipitation position is more robust and reliable than that perpendicular form) is critical in determining the resilience of this type of rock and its spatial implementation (e.g. flooring).
{"title":"INVESTIGATING THE ANISOTROPY STRENGTH INDEX (ASI) FOR SOME EGYPTIAN ORNAMENTAL STONES","authors":"A.M. Shohda, W. Draz, Faisal A Ali, M. A. Yassien, Mahrous A. M. Ali","doi":"10.17794/rgn.2023.1.4","DOIUrl":"https://doi.org/10.17794/rgn.2023.1.4","url":null,"abstract":"The nature of ornamental stones is anisotropic. The heterogeneous characteristics of the anisotropic rocks vary with direction. The highest to lowest strength ratio is known as the anisotropy strength index (ASI). A thorough investigation of the ASI is necessary to determine the best-directed loads for these rocks. On core specimens that have been bored parallel and perpendicular to the weakness planes, this is estimated using both uniaxial compression and point load testing. For this examination, four different rock types had cores that were drilled conventionally and in line with weakness planes. The research shows that drilling cores to weakness planes at a normal or nearly normal angle (90° to 60°) yields the best, most dependable ASI. According to the current study’s findings, the ASI fluctuates depending on how uniformly the mineral content and texture of rocks are. A suggested way to calculate the ASI and the load point strength is also included. This study reveals that the employment of ornamental stone as is (for example, precipitation position is more robust and reliable than that perpendicular form) is critical in determining the resilience of this type of rock and its spatial implementation (e.g. flooring).","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"1 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68156016","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
H. Maleki, M. Noparast, Sajjad Chehreghani, M. Mirmohammadi, A. Rezaei
One of the main challenges in the copper oxide processing industry is the application of flotation to reduce operating costs. Sulfidation-flotation is a commonly employed approach for floating oxide minerals using sulfidizers in order to sulfide the mineral’s surface. In this research work, an oxidized sample from the Qaleh Zari copper mine was used which was a high grade with 5.4% of copper (malachite and azurite). The prepared sample was subjected to mineralogical studies, and the obtained results indicated that the sample was oxidized. Malachite and azurite were the predominant minerals of copper oxide, and the predominant waste minerals were quartz and iron oxides (hematite and magnetite). The addition of sodium sulfide and flotation in four consecutive steps was a successful approach to meet the proper recovery and grade. Sodium sulfide, amyl potassium xanthate, sodium sulfide preparation time, and pH were selected as operating parameters using a central composite design (CCD). Also, by measuring the zeta potential, the electric charge of malachite was determined in different conditions after adding chemicals. Finally, under optimal conditions, the consumptions of sodium sulfide and amyl potassium xanthate, sodium sulfide preparation time, and pH value were 6790 g/t, 736 g/t, 10 minutes, and 9, respectively. By applying the mentioned conditions, a concentrate with a grade of 22.13%Cu and 90.51% recovery was achieved.
{"title":"OPTIMIZATION OF FLOTATION OF THE QALEH ZARI MINE OXIDIZED COPPER ORE SAMPLE BY THE SEQUENTIAL SULFIDATION APPROACH USING THE RESPONSE SURFACE METHOD TECHNIQUE","authors":"H. Maleki, M. Noparast, Sajjad Chehreghani, M. Mirmohammadi, A. Rezaei","doi":"10.17794/rgn.2023.1.6","DOIUrl":"https://doi.org/10.17794/rgn.2023.1.6","url":null,"abstract":"One of the main challenges in the copper oxide processing industry is the application of flotation to reduce operating costs. Sulfidation-flotation is a commonly employed approach for floating oxide minerals using sulfidizers in order to sulfide the mineral’s surface. In this research work, an oxidized sample from the Qaleh Zari copper mine was used which was a high grade with 5.4% of copper (malachite and azurite). The prepared sample was subjected to mineralogical studies, and the obtained results indicated that the sample was oxidized. Malachite and azurite were the predominant minerals of copper oxide, and the predominant waste minerals were quartz and iron oxides (hematite and magnetite). The addition of sodium sulfide and flotation in four consecutive steps was a successful approach to meet the proper recovery and grade. Sodium sulfide, amyl potassium xanthate, sodium sulfide preparation time, and pH were selected as operating parameters using a central composite design (CCD). Also, by measuring the zeta potential, the electric charge of malachite was determined in different conditions after adding chemicals. Finally, under optimal conditions, the consumptions of sodium sulfide and amyl potassium xanthate, sodium sulfide preparation time, and pH value were 6790 g/t, 736 g/t, 10 minutes, and 9, respectively. By applying the mentioned conditions, a concentrate with a grade of 22.13%Cu and 90.51% recovery was achieved.","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"1 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68156096","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Gusfrimanuel Nahan, S. Bijaksana, Putu Billy Suryanata, K. Ibrahim
Massive tailings have resulted from the extensive use of placer deposits in Central Kalimantan, Indonesia, by artisanal and small-scale gold mining (ASGM) activities. Recently, the placer deposits and their tailings have been exploited for heavy minerals. In this study, geochemical and magnetic analyses were carried out on these deposits to identify the prospect of REE (rare earth element) exploration in the materials already collected by ASGM activities. Samples were collected from ten different locations. For each location, two different fractions were prepared for analyses, i.e. the heavy mineral (HM) fraction and the panned (M60) fraction. All HM and M60 samples were subjected to magnetic susceptibility measurements, but only representative samples were subjected to x-ray fluorescence (XRF) measurements (for Si, Ti, Fe, Zr, and Al) and to inductively coupled plasma-emission spectroscopy (ICP-OES) measurements (for Eu, Tb, Dy, and Sc). The results showed that the concentrations of major elements (Ti, Fe, Zr, and Al) vary significantly from deposits along one river to another, while the concentration of Si is rather similar. Compared to M60 samples, the HM samples have higher concentrations of Ti, Fe, Zr, Al, and Sc, implying that the sluice-box separation enhances the concentration of valuable minerals. Magnetic susceptibility is found to be correlated with Fe and Sc concentrations, confirming the potential use of magnetic measurements as a complementary tool for Fe and Sc exploitation in placer deposits. It is believed that both the source rocks and the sedimentary settings of these deposits determine whether certain elements (Sc, Fe, and Zr) are present or absent in Central Kalimantan placer deposits. The prospect of exploring and exploiting Sc in these placer deposits might augment the ASGM activities in Central Kalimantan.
{"title":"GEOCHEMICAL AND MAGNETIC CHARACTERISTICS OF PLACER GOLD DEPOSITS FROM CENTRAL KALIMANTAN, INDONESIA","authors":"Gusfrimanuel Nahan, S. Bijaksana, Putu Billy Suryanata, K. Ibrahim","doi":"10.17794/rgn.2023.2.7","DOIUrl":"https://doi.org/10.17794/rgn.2023.2.7","url":null,"abstract":"Massive tailings have resulted from the extensive use of placer deposits in Central Kalimantan, Indonesia, by artisanal and small-scale gold mining (ASGM) activities. Recently, the placer deposits and their tailings have been exploited for heavy minerals. In this study, geochemical and magnetic analyses were carried out on these deposits to identify the prospect of REE (rare earth element) exploration in the materials already collected by ASGM activities. Samples were collected from ten different locations. For each location, two different fractions were prepared for analyses, i.e. the heavy mineral (HM) fraction and the panned (M60) fraction. All HM and M60 samples were subjected to magnetic susceptibility measurements, but only representative samples were subjected to x-ray fluorescence (XRF) measurements (for Si, Ti, Fe, Zr, and Al) and to inductively coupled plasma-emission spectroscopy (ICP-OES) measurements (for Eu, Tb, Dy, and Sc). The results showed that the concentrations of major elements (Ti, Fe, Zr, and Al) vary significantly from deposits along one river to another, while the concentration of Si is rather similar. Compared to M60 samples, the HM samples have higher concentrations of Ti, Fe, Zr, Al, and Sc, implying that the sluice-box separation enhances the concentration of valuable minerals. Magnetic susceptibility is found to be correlated with Fe and Sc concentrations, confirming the potential use of magnetic measurements as a complementary tool for Fe and Sc exploitation in placer deposits. It is believed that both the source rocks and the sedimentary settings of these deposits determine whether certain elements (Sc, Fe, and Zr) are present or absent in Central Kalimantan placer deposits. The prospect of exploring and exploiting Sc in these placer deposits might augment the ASGM activities in Central Kalimantan.","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"1 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68156948","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The growing energy demand in the world, as well as the current geopolitical situation, require countries to additional investments in the exploration and production of hydrocarbons from their own sources. This means that companies must develop new fields which have remained undeveloped until now mostly because extremely harsh environment where they are located (deep sea, high temperature, high pressure, heavy oils, etc.). The development of these new fields requires the development and adoption of new technology, among other things, and the development of a temperature-stable drilling fluid system able to fulfil all tasks according to the new technical challenges. Except for the technological challenges, there are also growing concerns related to the influence of the drilling operation on the environment. All of the above encourage the industry to develop new, inexpensive, and environmentally friendly additives which will be able to satisfy all technical and technological requirements and challenges of modern drilling. In the last few years, there has been a growing trend of laboratory research that includes different types of biodegradable waste as a potential additive that can achieve useful properties in mud. In this paper, the influence of mandarin peel powder on the filtration properties of mud after the aging process at elevated temperatures is examined. This eco-friendly additive was added to water-based muds in concentrations of 1% and 2% by volume of water. Laboratory research have shown stable filtration properties of the water-based mud containing mandarin peel powder even after exposing the mud to temperatures higher than 130 °C.
{"title":"THE INFLUENCE OF MANDARIN PEEL POWDER ON FILTRATION PROPERTIES AND TEMPERATURE STABILITY OF WATER-BASED DRILLING MUD","authors":"I. Medved, Borivoje Pašić, P. Mijić","doi":"10.17794/rgn.2023.2.3","DOIUrl":"https://doi.org/10.17794/rgn.2023.2.3","url":null,"abstract":"The growing energy demand in the world, as well as the current geopolitical situation, require countries to additional investments in the exploration and production of hydrocarbons from their own sources. This means that companies must develop new fields which have remained undeveloped until now mostly because extremely harsh environment where they are located (deep sea, high temperature, high pressure, heavy oils, etc.). The development of these new fields requires the development and adoption of new technology, among other things, and the development of a temperature-stable drilling fluid system able to fulfil all tasks according to the new technical challenges. Except for the technological challenges, there are also growing concerns related to the influence of the drilling operation on the environment. All of the above encourage the industry to develop new, inexpensive, and environmentally friendly additives which will be able to satisfy all technical and technological requirements and challenges of modern drilling. In the last few years, there has been a growing trend of laboratory research that includes different types of biodegradable waste as a potential additive that can achieve useful properties in mud. In this paper, the influence of mandarin peel powder on the filtration properties of mud after the aging process at elevated temperatures is examined. This eco-friendly additive was added to water-based muds in concentrations of 1% and 2% by volume of water. Laboratory research have shown stable filtration properties of the water-based mud containing mandarin peel powder even after exposing the mud to temperatures higher than 130 °C.","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"1 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68156995","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
B. Pranata, M. Ramdhan, M. Hanif, Muhammad Iqbal Sulaiman, Mufti Putra Maulana, W. Wandono, S. Widiyantoro, S. K. Suhardja, E. Hidayat, P. Supendi, Ridwan Kusnandar, W. Setyonegoro
Sumatra Island and its surroundings, Indonesia, are one of the most active tectonics in the world. The Aceh-Andaman earthquake, one of the most destructive earthquakes in the world, occurred there. It has attracted many earth scientists to apply various methods, including seismic tomography, to understand the island’s subsurface structure and tectonic system. This study is the first to delineate subsurface imaging beneath the island and its surroundings using a local-regional earthquake catalogue from the Indonesian Agency for Meteorology, Climatology, and Geophysics (BMKG) seismicnetwork. The tomographic imaging of P-wave (Vp) conducted in this study has successfully delineated subduction slabs (high Vp), partial melting zones (low Vp), volcanic arcs (low Vp), and Sumatran Fault zones (low Vp). The relationship between the subduction zone and the volcanic arc on the island can be seen on several vertical sections where a partial melting zone occurs at a depth of about 100 km, which functions as magma feeding for some volcanoes on the island. The oceanic slab model also exhibits a more pronounced and steeper slope towards the southern regions of Sumatra Island, possibly attributed to the slab’s aging process in that direction. The results highlight the importance of the BMKG seismic network in imaging local-regional subsurface structures beneath Indonesia’s archipelago, especially for the main islands such as Sumatra.
{"title":"SEISMIC IMAGING BENEATH SUMATRA ISLAND AND ITS SURROUNDINGS, INDONESIA, FROM LOCAL-REGIONAL P-WAVE EARTHQUAKE TOMOGRAPHY","authors":"B. Pranata, M. Ramdhan, M. Hanif, Muhammad Iqbal Sulaiman, Mufti Putra Maulana, W. Wandono, S. Widiyantoro, S. K. Suhardja, E. Hidayat, P. Supendi, Ridwan Kusnandar, W. Setyonegoro","doi":"10.17794/rgn.2023.3.10","DOIUrl":"https://doi.org/10.17794/rgn.2023.3.10","url":null,"abstract":"Sumatra Island and its surroundings, Indonesia, are one of the most active tectonics in the world. The Aceh-Andaman earthquake, one of the most destructive earthquakes in the world, occurred there. It has attracted many earth scientists to apply various methods, including seismic tomography, to understand the island’s subsurface structure and tectonic system. This study is the first to delineate subsurface imaging beneath the island and its surroundings using a local-regional earthquake catalogue from the Indonesian Agency for Meteorology, Climatology, and Geophysics (BMKG) seismicnetwork. The tomographic imaging of P-wave (Vp) conducted in this study has successfully delineated subduction slabs (high Vp), partial melting zones (low Vp), volcanic arcs (low Vp), and Sumatran Fault zones (low Vp). The relationship between the subduction zone and the volcanic arc on the island can be seen on several vertical sections where a partial melting zone occurs at a depth of about 100 km, which functions as magma feeding for some volcanoes on the island. The oceanic slab model also exhibits a more pronounced and steeper slope towards the southern regions of Sumatra Island, possibly attributed to the slab’s aging process in that direction. The results highlight the importance of the BMKG seismic network in imaging local-regional subsurface structures beneath Indonesia’s archipelago, especially for the main islands such as Sumatra.","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"1 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68157896","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The heterogeneity in the spatial distribution of initial water saturation influences the performance of hot water flooding. The prospect of a reduction in oil recovery arises from the development of viscous instability. In the present study, a numerical simulation model has been developed by coupling heat transport, and multiphase flow in porous media integrated with the non-isothermal flow, and the numerical model has been verified with the existing analytical solution by Buckley and Leverett. The formation of a wavy temperature profile at the condensation front was found with a decreased depth of temperature penetration. The average rise of temperature is drastically affected by the spatial distribution of initial water saturation. The formation of viscous fingering was highly dominating in the reservoir, with initial water saturation randomly distributed and causing the front to move in an irregular pattern from the initial stage of the flooding. The heterogeneous reservoir with initial water distribution showed the earlier formation of viscous fingering than the homogeneous reservoir. The heterogeneity in the spatial distribution of initial water saturation had caused viscous instability, lower viscosity reduction, lower displacement sweeps efficiency, and higher residual oil saturation. The present study is limited to spatial distribution in initial water saturation to a certain degree of heterogeneity. The heterogeneity in the spatial distribution of initial water saturation highly impacted the production performance of hot water flooding. The present study provides an idea for the implementation and future development of hot water flooding in a randomly initial water saturation distributed environment.
{"title":"NUMERICAL INVESTIGATION ON THE IMPACT OF INITIAL WATER SATURATION DISTRIBUTION ON HOT WATER FLOODING PERFORMANCE UNDER NON-ISOTHERMAL CONDITIONS","authors":"Md. Irshad Ansari, S. Govindarajan","doi":"10.17794/rgn.2023.2.11","DOIUrl":"https://doi.org/10.17794/rgn.2023.2.11","url":null,"abstract":"The heterogeneity in the spatial distribution of initial water saturation influences the performance of hot water flooding. The prospect of a reduction in oil recovery arises from the development of viscous instability. In the present study, a numerical simulation model has been developed by coupling heat transport, and multiphase flow in porous media integrated with the non-isothermal flow, and the numerical model has been verified with the existing analytical solution by Buckley and Leverett. The formation of a wavy temperature profile at the condensation front was found with a decreased depth of temperature penetration. The average rise of temperature is drastically affected by the spatial distribution of initial water saturation. The formation of viscous fingering was highly dominating in the reservoir, with initial water saturation randomly distributed and causing the front to move in an irregular pattern from the initial stage of the flooding. The heterogeneous reservoir with initial water distribution showed the earlier formation of viscous fingering than the homogeneous reservoir. The heterogeneity in the spatial distribution of initial water saturation had caused viscous instability, lower viscosity reduction, lower displacement sweeps efficiency, and higher residual oil saturation. The present study is limited to spatial distribution in initial water saturation to a certain degree of heterogeneity. The heterogeneity in the spatial distribution of initial water saturation highly impacted the production performance of hot water flooding. The present study provides an idea for the implementation and future development of hot water flooding in a randomly initial water saturation distributed environment.","PeriodicalId":44536,"journal":{"name":"Rudarsko-Geolosko-Naftni Zbornik","volume":"37 1","pages":""},"PeriodicalIF":1.3,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"68156045","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：