Journal of Wrist Surgery最新文献

Background  Wrist arthroscopy has become increasingly popular for diagnosing and treating traumatic wrist injuries. How wrist arthroscopy has influenced the daily practice of wrist surgeons remains unclear. The objective of this study was to evaluate the role of wrist arthroscopy for the diagnosis and treatment of traumatic wrist injuries among members of the International Wrist Arthroscopy Society (IWAS). Methods  An online survey was conducted among IWAS members between August and November 2021 with questions regarding the diagnostic and therapeutic importance of wrist arthroscopy. Questions focused on traumatic injuries of the triangular fibrocartilage complex (TFCC) and scapholunate ligament (SLL). Multiple-choice questions were presented in the form of a Likert scale. The primary outcome was respondent agreement, defined as 80% answering similarly. Results  The survey was completed by 211 respondents (39% response rate). The majority (81%) were certified or fellowship-trained wrist surgeons. Most respondents (74%) had performed over 100 wrist arthroscopies. Agreement was reached on 4 of the 22 questions. It was agreed that the outcomes of wrist arthroscopy strongly depend on surgeons' experience, that there is sufficient evidence for the diagnostic purposes of wrist arthroscopy, and that wrist arthroscopy is better than magnetic resonance imaging (MRI) for diagnosing TFCC and SLL injuries. No agreement was reached on the preferred treatment of any type of TFCC or SLL injury. Conclusion  There is agreement that wrist arthroscopy is superior to MRI for diagnosing traumatic TFCC and SLL injuries, yet experts remain divided on the optimal management. Guidelines need to be developed for the standardization of indications and procedures. Level of Evidence  This is a Level III study.

Purpose  The purpose of this study was to evaluate the clinical and functional results of 67 patients with distal radius fracture (DRF), treated with a modified surgical technique that allows three-column fixation through the same palmar approach. Patients and Methods  Between 2014 and 2019, we treated 67 patients using a particular surgical technique. All patients suffered DRF, classified using the universal classification system. Two different intervals were developed palmary: the first ulnarly to the flexor carpi radialis tendon for direct visualization of the distal radius and the second one radially to the radial artery for direct visualization of the styloid process. An anatomic volar locking compression plate was applied to all patients. The radial styloid process was fixed and stabilized either with Kirschner-wires or an anatomic plate through the same incision. Functional results were evaluated based on the Disabilities of the Arm, Shoulder and Hand and Mayo wrist scores. Range of motion and grip strength of the injured wrist were statistically compared with the opposite side. Results  The mean follow-up was 47 months (13-84). All fractures were united, and all patients recovered to the preinjury level of activity. The mean flexion-extension range was 73.8° to 55.2° and the supination-pronation range 82.8° to 67°. No infection or nonunion occurred. No major complications were reported. Conclusion  Open reduction and internal fixation, under specific indications, is the best treatment option in DRF. The described technique provides excellent visualization to the distal radius surfaces and allows the internal fixation of the radial columns through the same skin incision. Therefore, it can constitute an efficient choice in the treatment armamentarium of DRF.

Background  Treatment algorithm for disruption of the triangular fibrocartilage complex (TFCC) from the ulnar fovea includes direct TFCC repair, tendon reconstruction of the radioulnar ligaments, or a salvage procedure in cases with painful distal radioulnar joint (DRUJ) degeneration. Case Description  We describe our surgical technique for reconstruction of the distal oblique bundle (DOB), to attain DRUJ stability in a young man, after failed attempts of direct TFCC reinsertion and radioulnar ligament reconstruction with the Adams procedure. Literature Review  Reconstruction of the central band of the interosseous membrane is well recognized for Essex-Lopresti injuries that demonstrate longitudinal forearm instability. The role for reconstruction/reinforcement of the DOB to restore DRUJ stability after TFCC injury has not gained the same recognition and needs further clarification. Clinical Relevance  DOB reconstruction technique described is extra-articular and technically straightforward. We believe that the procedure could be considered for patients with an irreparable TFCC injury as a part of the treatment algorithm for younger patients, who otherwise would face a more extensive salvage procedure.

Background  The inclusion of the third carpometacarpal (CMC) joint in the fusion mass in total wrist fusion (TWF) remains controversial. Our goal was to evaluate the clinical outcomes and effects of third CMC joint arthrodesis compared with bridging the CMC joint during TWF. A retrospective chart review was performed. Outcomes assessed included hardware loosening, hardware failure, symptomatic hardware necessitating removal, and need for revision arthrodesis. Case Description/Literature Review  We found that concomitant third CMC joint arthrodesis was associated with a significantly reduced rate of radiocarpal and midcarpal joint nonunion, hardware loosening, and symptomatic hardware removal when compared to bridging of the CMC joint. There was no significant difference in hardware failure rates or the need for revision arthrodesis. Clinical Relevance  When using a contoured dorsal spanning plate, concomitant CMC joint arthrodesis should be considered during TWF to mitigate against hardware loosening and symptomatic hardware. Level of Evidence  Level IV.

Background  Dorsal intercalated segment instability (DISI) in scaphoid nonunions is frequently attributed to fracture location relative to ligamentous attachments onto the scaphoid apex. We hypothesize scaphoid length loss to have a stronger correlation with DISI deformity than fracture location in patients with scaphoid nonunion. Questions/Purposes  To investigate the correlation between (1) scaphoid length loss, (2) fracture location relative to the scaphoid apex, and (3) type of nonunion (Herbert classification) and DISI deformity in skeletally mature patients with scaphoid nonunion. Patients and Methods  Twenty-seven cases of computed tomography (CT)-confirmed scaphoid nonunion (>6 months) were retrospectively included. Our primary outcome was the degree of DISI as measured by the radiolunate (RL) angle on CT. Scaphoid length loss was expressed as height-to-length (H/L) ratio. Fracture location was classified as proximal or distal to the scaphoid apex. Nonunions were classified as fibrous unions (type D1) or pseudoarthrosis (type D2). The correlation between RL angle, H/L ratio, fracture location, and nonunion type was evaluated. Results  H/L ratio was the only factor associated with the degree of DISI as measured by RL angle. As scaphoid length loss increased (increasing H/L ratio), the RL angle increased. There was no significant difference in RL angle between fractures located proximal (30 degrees) or distal (28 degrees) to the scaphoid apex, or type D1 (31 degrees) versus type D2 (28 degrees) nonunions. There was no correlation between patient age, sex, or wrist side affected and RL angle. Conclusions  Scaphoid length loss, rather than fracture location, is correlated to the degree of DISI deformity in patients with scaphoid nonunion. This highlights the importance of restoring scaphoid height when planning scaphoid nonunion reconstruction. Level of Evidence  Level III, diagnostic study.

Background  Triangular fibrocartilage complex (TFCC) injury often results in distal radioulnar joint (DRUJ) instability. However, not all patients with a ruptured TFCC have an unstable DRUJ as in these patients a distal oblique bundle (DOB) may be present. We assumed that augmentation of the DOB leads to a more stable situation following reinsertion of the TFCC. We present the clinical results of a new surgical technique using the TightRope system as a DOB augmentation. Description of Technique  All cases were treated under regional anesthesia with the TightRope implant for which a tunnel was drilled from the distal ulna through the radius along the path of the DOB. The TightRope was passed through the tunnel and secured with buttons on either side. X-rays were made during surgery to confirm correct positioning. Methods  A retrospective study was performed analyzing 21 cases treated with a TightRope augmentation of the DOB. The primary outcome was measured using the patient-rated wrist evaluation (PRWE) score at least 12 months after surgery. Results  Postoperatively, the DRUJ was stable in all patients. The median PRWE score was 16 for the injured side compared to zero for the uninjured side ( p -value: < 0.001). The median pronation and supination were not statistically significant when we compared the injured side to the uninjured side. The median grip strength was 31 kg for the injured side compared to 38 kg for the uninjured side ( p -value: 0.015). There were two minor postoperative complications (10%). Conclusion  This technique is capable of restoring DRUJ stability with a short immobilization period resulting in good patient-related outcomes and a low complication rate.

Purpose  This study describes the anatomy and analyzes the variations of the midsectional morphology of the sigmoid notch. Methods  The wrists of 50 patients with suspected scaphoid fracture were evaluated by magnetic resonance imaging (MRI). Sigmoid notch length, volar and dorsal rim heights, insertion length of the volar radioulnar ligament, and Tolat morphology classification were measured on T1-weighted axial plane MRI. Ulnar variance and distal radioulnar joint (DRUJ) inclination were assessed on anteroposterior radiographs. Results  The most common sigmoid notch shapes were types C (C-shaped, 60%) and B (ski-slope, 30%), followed by types D (S-shaped, 6%) and A (flat, 4%). Types A and B had a flat dorsal rim (mean 0.77 ± 1.09 mm, range 0.0-1.54 mm, and mean 0.22 ± 0.3 mm, range 0.0-0.76 mm, respectively). Types C and D had more prominent dorsal rims (means 1.47 ± 0.59 mm, range 0.66-2.57 mm, and mean 1.6 ± 0.97 mm, range 0.8-2.68 mm, respectively). The average volar lip length was 1.60 ± 1.11 mm (range, 0.0-4.10). The dorsovolar length of the radius was 18.4 ± 2.01 mm; the length of the sigmoid notch was 14.3 ± 1.73 mm. The type of sigmoid notch according to Tolat was significantly associated with volar lip length ( p  = 0.005). The type of sigmoid notch was not associated with ulnar variance or DRUJ inclination. The length of the sigmoid notch was significantly associated with the type of sigmoid notch ( p  = 0.005). The analysis demonstrated a negative association between the sigmoid notch length and the volar insertion of the radioulnar ligament ( p  = 0.019). Conclusions  The transversal morphology of the sigmoid notch was either flat with the least congruence (similar to type A of Tolat), with volar congruence only (similar to type B), or with volar and dorsal congruence (similar to types C and D). A shorter sigmoid notch may be compensated by a broader insertion of the volar radioulnar ligament. Clinical Relevance  The measurements and correlations demonstrated in this study can be a guide when considering reconstructive procedures or dealing with the instability of the DRUJ.

Introduction  The literature is scarce regarding the management of combined tears of scapholunate (SL) and lunotriquetral (LT) ligaments. This study aimed to evaluate our preliminary results with the arthroscopic dorsal ligamentocapsulodesis in managing such cases. Materials and Methods  Forty-two patients (13 females, 29 males; mean age = 31; age range = 18-51 years) who underwent arthroscopic dorsal ligamentocapsulodesis due to the combined tears of SL and LT ligaments were retrospectively reviewed. The mean follow-up was 38 (range = 24-55) months. The Modified Mayo Wrist Score, the visual analogue scale (VAS), and grip strength were assessed preoperatively and at the final follow-up examination. Results  The mean Modified Mayo Wrist Score significantly improved from 49 (range = 25-70) preoperatively to 82 (range = 60-100) at the final follow-up ( p  = 0.000). The mean VAS significantly decreased from 6.33 to 1.6 ( p  = 0.000). The mean hand grip strength significantly improved from 31 (range = 19-41) kg to 44 (range = 25-60) kg at the final follow-up examination ( p  < 0.001). No major complications were encountered. Conclusion  Arthroscopic dorsal ligamentocapsulodesis seems to be a safe and effective surgical technique in the management of this rare combined injury pattern. Level of Evidence  This is a Level IV, retrospective case series study.

Background  Fifth carpometacarpal joint (CMCJ) fracture dislocation is a relatively rare injury and most will require operative treatment because of its unstable nature. Improper reduction and fixation lead to joint surface destruction, pain, and reduced grasping power. Intra-articular fragment reduction is often obscured by dorsally displaced ulnar fragment. Therefore, fifth CMCJ arthroscopy can be advantageous in assisting intra-articular fragment reduction. However, there is no detailed description of the portal landmarks or portals' relationship with adjacent important structures in the literature. Purposes  To explore the feasibility and safety of fifth CMCJ arthroscopy, locations of the portals are examined in cadaveric hand specimens. Their proximity to important anatomical structures such as dorsal cutaneous branch of ulnar nerve (DCBUN), ring finger and little finger extensor digitorum communis (EDC), and extensor digiti minimi (EDM) is measured. Methods  Fifth CMCJ arthroscopy is performed on 11 cadaveric hand specimens by specialist-level surgeon. The portals are marked and portal positions are further confirmed under the fluoroscopy. Then the cadaveric specimens were undergone anatomical dissection by specialist-level surgeon. During dissection, the spatial relationship between the portal positions and DCBUN, EDC to ring finger and little finger, and EDM is identified. The distance between the portals and the above important structures was measured in millimeters. Results  DCBUN was consistently found between fourth metacarpohamate (4-MH) and fifth metacarpohamate (5-MH) portals, with it being closer to the latter (mean distance, 2.03 mm; range, 0-4.43 mm; standard deviation [SD], 1.09 mm). The closest tendon for 4-MH portal is ring finger EDC (mean distance, 2.65 mm; range, 0-5.89 mm; SD, 1.78 mm), while 5-MH portal and accessory portal were closest to EDC (mean distance, 1.88 mm; range, 0-3.69 mm; SD, 1.25 mm) and EDM (mean distance, 7.79 mm; range, 6.63-10.72 mm; SD, 1.49 mm), respectively. During the process of specimen dissection, we found no damage to the above structures after portal introduction. Conclusion  The above findings support the use of fifth CMCJ arthroscopy, which can be used for assisted reduction in fifth metacarpal base fracture dislocation and hamate body fracture. Gentle soft tissue spreading technique during portal creation prevents injury to the important structure surrounding the portals. Level of evidence  This is a Level V study.