Abstract The research in this paper aims to set up a new consumer profile definition method based on fuzzy technology and fuzzy AHP. The result of the study could be applied to garment recommendation systems for a special consumer. Consumer profiles are chosen as research objects. The fuzzy technology and fuzzy AHP are applied in this research, which aims to provide a new method of using fuzzy technology and fuzzy AHP to define consumer profiles. We define tall–short and fat–thin by fuzzy technology and set up the weights of consumer profile by fuzzy AHP methods. The fuzzy technology and fuzzy AHP are applied for building consumer profiles that can be used for a consumer-oriented intelligent garment recommendation system.
{"title":"A New Consumer Profile Definition Method Based on Fuzzy Technology and Fuzzy AHP","authors":"Junjie Zhang, Xianyi Zeng, M. Dong, Hua Yuan","doi":"10.2478/aut-2021-0027","DOIUrl":"https://doi.org/10.2478/aut-2021-0027","url":null,"abstract":"Abstract The research in this paper aims to set up a new consumer profile definition method based on fuzzy technology and fuzzy AHP. The result of the study could be applied to garment recommendation systems for a special consumer. Consumer profiles are chosen as research objects. The fuzzy technology and fuzzy AHP are applied in this research, which aims to provide a new method of using fuzzy technology and fuzzy AHP to define consumer profiles. We define tall–short and fat–thin by fuzzy technology and set up the weights of consumer profile by fuzzy AHP methods. The fuzzy technology and fuzzy AHP are applied for building consumer profiles that can be used for a consumer-oriented intelligent garment recommendation system.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47387922","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. Mansoor, L. Hes, A. Khalil, J. Militký, M. Tunák, V. Bajzík, Y. Kyosev
Abstract In this study, an algebraic model and its experimental verification was carried out to investigate the effect of moisture content on the heat loss that takes place due to conduction of sock fabrics. The results show that increasing moisture content in the studied socks caused a significant increase in their conductive heat loss. Plain knitted socks with different fiber composition were wetted to a saturated level, and then their moisture content was reduced stepwise. When achieving the required moisture content, the socks samples were characterized by the Alambeta testing instrument for heat transfer. Three different existing modified mathematical models for the thermal conductivity of wet fabrics were used for predicting thermal resistance of socks under wet conditions. The results from both ways are in very good agreement for all the socks at a 95% confidence level. In the above-mentioned models, the prediction of thermal resistance presents newly a combined effect of the real filling coefficient and thermal conductivity of the so-called “wet” polymers instead of dry polymers. With these modifications, the used models predicted the thermal resistance at different moisture levels. Predicted thermal resistance is converted into heat transfer (due to conduction) with a significantly high coefficient of correlation.
{"title":"Conductive Heat Transfer Prediction of Plain Socks in Wet State","authors":"T. Mansoor, L. Hes, A. Khalil, J. Militký, M. Tunák, V. Bajzík, Y. Kyosev","doi":"10.2478/aut-2021-0032","DOIUrl":"https://doi.org/10.2478/aut-2021-0032","url":null,"abstract":"Abstract In this study, an algebraic model and its experimental verification was carried out to investigate the effect of moisture content on the heat loss that takes place due to conduction of sock fabrics. The results show that increasing moisture content in the studied socks caused a significant increase in their conductive heat loss. Plain knitted socks with different fiber composition were wetted to a saturated level, and then their moisture content was reduced stepwise. When achieving the required moisture content, the socks samples were characterized by the Alambeta testing instrument for heat transfer. Three different existing modified mathematical models for the thermal conductivity of wet fabrics were used for predicting thermal resistance of socks under wet conditions. The results from both ways are in very good agreement for all the socks at a 95% confidence level. In the above-mentioned models, the prediction of thermal resistance presents newly a combined effect of the real filling coefficient and thermal conductivity of the so-called “wet” polymers instead of dry polymers. With these modifications, the used models predicted the thermal resistance at different moisture levels. Predicted thermal resistance is converted into heat transfer (due to conduction) with a significantly high coefficient of correlation.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-07-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42692674","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The purpose of this study was to determine the adoption groups of the fast-fashion consumers, evaluate the consumers’ perceptions of the fast-fashion in different groups, and model the role of “social or status image”, “uniqueness”, and “conformity” on the level of fast-fashion consumer adoption. The consumer adoption groups were determined as “innovators”, “early adopters”, “early majority”, “late majority”, and “laggards” by using a domain-specific innovativeness (DSI) scale. Consumers’ perceptions of fast-fashion were evaluated from cognitive and emotional aspects and the differences across the consumer groups were investigated by using Kruskal-–Wallis test and Mann-–Whitney U test. The roles of “social or status image”, “uniqueness”, and “conformity” on consumer groups were modeled by using ordinal logistic regression analysis. As a result of the research, consumers’ perceptions of fast-fashion were found to vary across different consumer adoption groups in terms of “being in-style products”, “expressing self-image”, “imitating the luxury fashion products”, and “frequent renewal of the collections”. Further, the findings revealed that the probabilistic relationship between different levels of consumer adoption based on innovativeness could be modeled based on the motivations of “social or status image” and “uniqueness”.
{"title":"Consumer Adoption of Fast-Fashion, Differences of Perceptions, and the Role of Motivations Across the Adoption Groups","authors":"N. Okur","doi":"10.2478/aut-2021-0024","DOIUrl":"https://doi.org/10.2478/aut-2021-0024","url":null,"abstract":"Abstract The purpose of this study was to determine the adoption groups of the fast-fashion consumers, evaluate the consumers’ perceptions of the fast-fashion in different groups, and model the role of “social or status image”, “uniqueness”, and “conformity” on the level of fast-fashion consumer adoption. The consumer adoption groups were determined as “innovators”, “early adopters”, “early majority”, “late majority”, and “laggards” by using a domain-specific innovativeness (DSI) scale. Consumers’ perceptions of fast-fashion were evaluated from cognitive and emotional aspects and the differences across the consumer groups were investigated by using Kruskal-–Wallis test and Mann-–Whitney U test. The roles of “social or status image”, “uniqueness”, and “conformity” on consumer groups were modeled by using ordinal logistic regression analysis. As a result of the research, consumers’ perceptions of fast-fashion were found to vary across different consumer adoption groups in terms of “being in-style products”, “expressing self-image”, “imitating the luxury fashion products”, and “frequent renewal of the collections”. Further, the findings revealed that the probabilistic relationship between different levels of consumer adoption based on innovativeness could be modeled based on the motivations of “social or status image” and “uniqueness”.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47595659","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Eva Lindell, Hanna Tingsvik, Li Guo, Joel Peterson
Abstract Every year, approximately 3,000 people in Sweden undergo amputation of a body part. The use of a prosthesis can greatly improve the quality of life for these people. To improve the fit and comfort of a prosthesis, a sock is used as an interface between the prosthesis socket and the stump. A three-dimensional (3D) body scanner can be used to take measurements that are used to produce individualized socks that improve fit and comfort. The standardized method for taking measurements with a 3D body scanner often requires a standing position and hence a new scanning method is needed to improve the accessibility for 3D body scanning. This study aimed to create a scanning scenario and an algorithm for scanning amputation stumps for individualizing prosthesis socks for upper-body amputations. Vitronic VITUSSMART LC 3D Body Scanner was used in this study. The results show a seated position with arms slightly away from the body, scanned at 45° as the best. To measure the right upper arm and the left armpit, the best was to scan at a 315° angle. Paired t-tests showed no significant differences compared with the 3D body scanner of traditional manual measurements. The proposed method exhibited good relative reliability and potential to facilitate the customization of prosthetic socks for amputees.
{"title":"3D Body Scan as Anthropometric Tool for Individualized Prosthetic Socks","authors":"Eva Lindell, Hanna Tingsvik, Li Guo, Joel Peterson","doi":"10.2478/aut-2021-0007","DOIUrl":"https://doi.org/10.2478/aut-2021-0007","url":null,"abstract":"Abstract Every year, approximately 3,000 people in Sweden undergo amputation of a body part. The use of a prosthesis can greatly improve the quality of life for these people. To improve the fit and comfort of a prosthesis, a sock is used as an interface between the prosthesis socket and the stump. A three-dimensional (3D) body scanner can be used to take measurements that are used to produce individualized socks that improve fit and comfort. The standardized method for taking measurements with a 3D body scanner often requires a standing position and hence a new scanning method is needed to improve the accessibility for 3D body scanning. This study aimed to create a scanning scenario and an algorithm for scanning amputation stumps for individualizing prosthesis socks for upper-body amputations. Vitronic VITUSSMART LC 3D Body Scanner was used in this study. The results show a seated position with arms slightly away from the body, scanned at 45° as the best. To measure the right upper arm and the left armpit, the best was to scan at a 315° angle. Paired t-tests showed no significant differences compared with the 3D body scanner of traditional manual measurements. The proposed method exhibited good relative reliability and potential to facilitate the customization of prosthetic socks for amputees.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46780627","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Karolina Wilgocka, E. Skrzetuska, I. Krucinska, W. Sujka
Abstract Premature birth is considered to be a substantial problem in perinatal medicine, which in the vast majority of cases (>60%), concerns African and South Asian countries. Nevertheless, prematurity is a global problem and is faced by both less-developed (where 12% of babies are prematurely born) and well-developed countries (with 9% prematurity rate) [1, 2]. The percentage of children born prematurely, i.e., before the 37th week of pregnancy, was 8.7% in Europe, while, in Poland, it was 7.34% [3]. Care of prematurely born babies is a huge challenge for parents and medical staff in the neonatal intensive care unit. Preterm infants, because of their low weight and gestational age, are prone to health problems and even death. For this reason, continuous monitoring of health parameters plays an important role. It is achieved by the use of various sensors that are inserted in infants’ garments. Sensor systems monitor an infant’s health condition, and then the data are transmitted to doctors or parents. This article is for illustrative purposes, aimed at presenting solutions such as the use of sensors for monitoring infants’ physiological parameters.
{"title":"Textronic Solutions Used for Premature Babies: A Review","authors":"Karolina Wilgocka, E. Skrzetuska, I. Krucinska, W. Sujka","doi":"10.2478/aut-2021-0034","DOIUrl":"https://doi.org/10.2478/aut-2021-0034","url":null,"abstract":"Abstract Premature birth is considered to be a substantial problem in perinatal medicine, which in the vast majority of cases (>60%), concerns African and South Asian countries. Nevertheless, prematurity is a global problem and is faced by both less-developed (where 12% of babies are prematurely born) and well-developed countries (with 9% prematurity rate) [1, 2]. The percentage of children born prematurely, i.e., before the 37th week of pregnancy, was 8.7% in Europe, while, in Poland, it was 7.34% [3]. Care of prematurely born babies is a huge challenge for parents and medical staff in the neonatal intensive care unit. Preterm infants, because of their low weight and gestational age, are prone to health problems and even death. For this reason, continuous monitoring of health parameters plays an important role. It is achieved by the use of various sensors that are inserted in infants’ garments. Sensor systems monitor an infant’s health condition, and then the data are transmitted to doctors or parents. This article is for illustrative purposes, aimed at presenting solutions such as the use of sensors for monitoring infants’ physiological parameters.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46212913","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The main purpose of the article is to present the new possibilities of producing composite reinforcement with the use of a computer embroidery machine. This kind of production is in line with the principles of sustainable development. The study below presents the results of strength tests of composites containing sevenfold embroidery systems. Each variant included different directions of arrangement of individual layers as a reinforcement. Flax roving was used to strengthen the composite. Flax fibers are characterized by the highest strength among all-natural fibers, at the level of 50–80 cN/tex. The composite was made using the vacuum bag method, using epoxy resin. The embroidery was made on a ZSK embroidery machine, type JCZA 0109-550. The test material was subjected to strength tests—tensile strength, tensile elongation, and bending strength, on the INSTRON machine. Based on the research, it can be concluded that the arrangement of the roving in the direction of the tensile force allowed to obtain the best mechanical properties.
{"title":"Mechanical Properties of Composites Reinforced with Technical Embroidery Made of Flax Fibers","authors":"Agata Poniecka, M. Barburski, M. Urbaniak","doi":"10.2478/aut-2021-0025","DOIUrl":"https://doi.org/10.2478/aut-2021-0025","url":null,"abstract":"Abstract The main purpose of the article is to present the new possibilities of producing composite reinforcement with the use of a computer embroidery machine. This kind of production is in line with the principles of sustainable development. The study below presents the results of strength tests of composites containing sevenfold embroidery systems. Each variant included different directions of arrangement of individual layers as a reinforcement. Flax roving was used to strengthen the composite. Flax fibers are characterized by the highest strength among all-natural fibers, at the level of 50–80 cN/tex. The composite was made using the vacuum bag method, using epoxy resin. The embroidery was made on a ZSK embroidery machine, type JCZA 0109-550. The test material was subjected to strength tests—tensile strength, tensile elongation, and bending strength, on the INSTRON machine. Based on the research, it can be concluded that the arrangement of the roving in the direction of the tensile force allowed to obtain the best mechanical properties.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-06-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44531685","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jolita Krisciunaite, Brigita Kalendraite, L. Ragelienė, Evelina Merkelyte, D. Mikučionienė
Abstract Antimicrobial finishing is increasingly used in textile products to increase their functionality. Antimicrobial properties became extremely important during the COVID-19 situation. The main problems faced by antimicrobial finishing are nontoxicity and durability (wash-resistance) of antibacterial activity. Also, it is important to determine whether the antimicrobial finishing changes comfort properties, such as air permeability. This paper deals with the durability of antimicrobial treatment, that is, resistance to washing, and effect on the structural changes that may have influence on the comfort properties, such as permeability to air. Knits of various raw compositions were antimicrobial-treated with the new commercial antimicrobial product, Si Bactericidal (Smart Inovation, Portugal). After the antimicrobial treatment, knitted specimens were washed 50 times and changes in their structural parameters, air permeability, and antimicrobial activity were measured. It was found that the mentioned antimicrobial treatment gives very good antimicrobial activity to the treated fabric and is wash-resistant and long-lasting. Also, it does not change dimensions and permeability to air of the treated fabrics with some exceptions of cotton-based knitted structures.
{"title":"Durable Wash-Resistant Antimicrobial Treatment of Knitted Fabrics","authors":"Jolita Krisciunaite, Brigita Kalendraite, L. Ragelienė, Evelina Merkelyte, D. Mikučionienė","doi":"10.2478/aut-2021-0009","DOIUrl":"https://doi.org/10.2478/aut-2021-0009","url":null,"abstract":"Abstract Antimicrobial finishing is increasingly used in textile products to increase their functionality. Antimicrobial properties became extremely important during the COVID-19 situation. The main problems faced by antimicrobial finishing are nontoxicity and durability (wash-resistance) of antibacterial activity. Also, it is important to determine whether the antimicrobial finishing changes comfort properties, such as air permeability. This paper deals with the durability of antimicrobial treatment, that is, resistance to washing, and effect on the structural changes that may have influence on the comfort properties, such as permeability to air. Knits of various raw compositions were antimicrobial-treated with the new commercial antimicrobial product, Si Bactericidal (Smart Inovation, Portugal). After the antimicrobial treatment, knitted specimens were washed 50 times and changes in their structural parameters, air permeability, and antimicrobial activity were measured. It was found that the mentioned antimicrobial treatment gives very good antimicrobial activity to the treated fabric and is wash-resistant and long-lasting. Also, it does not change dimensions and permeability to air of the treated fabrics with some exceptions of cotton-based knitted structures.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49006792","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract On the medical device market there are several types of stationary and portable incubators that can be used in the care of infants. The prototype of a textile incubator made as part of this work consists of five material layers. The textile incubator is equipped with a functional heating and cooling mat, which is made on the basis of 3D channeled weft-knitted fabric. Its function is to generate heat and maintain it inside the textile incubator or to cool the baby's body while using therapeutic hypothermia. The mat is equipped with hoses transporting the heating or cooling medium. The mat, depending on variable input parameters, can emit heat in the range from 1.15 W to 86.88 W. In case of the cooling function, it can receive heat in the range from −4.32 to −27.96 W. This indicates a large adjustment range of the amount of heat supplied and received, which is a positive feature, and enables programming the heat balance to ensure comfort for the baby. The analysis of temperature measurements on the mat surface confirmed that maximum temperature differences do not exceed 1.6°C.
{"title":"Thermal Analysis of Heating–Cooling Mat of Textile Incubator for Infants","authors":"Z. Mikołajczyk, Agnieszka Szałek","doi":"10.2478/aut-2021-0029","DOIUrl":"https://doi.org/10.2478/aut-2021-0029","url":null,"abstract":"Abstract On the medical device market there are several types of stationary and portable incubators that can be used in the care of infants. The prototype of a textile incubator made as part of this work consists of five material layers. The textile incubator is equipped with a functional heating and cooling mat, which is made on the basis of 3D channeled weft-knitted fabric. Its function is to generate heat and maintain it inside the textile incubator or to cool the baby's body while using therapeutic hypothermia. The mat is equipped with hoses transporting the heating or cooling medium. The mat, depending on variable input parameters, can emit heat in the range from 1.15 W to 86.88 W. In case of the cooling function, it can receive heat in the range from −4.32 to −27.96 W. This indicates a large adjustment range of the amount of heat supplied and received, which is a positive feature, and enables programming the heat balance to ensure comfort for the baby. The analysis of temperature measurements on the mat surface confirmed that maximum temperature differences do not exceed 1.6°C.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44911599","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Sadowski, Bogusława Dobrowolska, B. Skowron-Grabowska, A. Bujak
Abstract The article presents changes that took place in the textile and apparel (T&A) industry in Poland in the years 2004–2020. To describe the changes, we adopted the supply chain management perspective, which allowed for a global view of the changes taking place. We discuss the basic characteristics, such as the size and structure of the industry, innovation, production value, and the use of information and communications technology (ICT). In the research, we used the databases of the Central Statistical Office (GUS) on the sold production of the T&A industry, as well as imports and exports. Our research shows that, at the level of basic characteristics, the industry is close to the European model. However, it is characterized by a smaller share of small companies in the structure of enterprises. The research showed an upward trend in the production of sold textiles and, to a lesser extent, apparel. At the same time, the operation of the Polish T&A industry is influenced by the import of finished products and raw materials from China, Germany, Bangladesh, and Turkey. The export is directed to the German, Czech, Romanian, and Ukrainian markets. The article provides an overview of the development trends in the Polish T&A industry in the broad context of international conditions.
{"title":"Polish Textile and Apparel Industry: Global Supply Chain Management Perspective","authors":"A. Sadowski, Bogusława Dobrowolska, B. Skowron-Grabowska, A. Bujak","doi":"10.2478/aut-2021-0021","DOIUrl":"https://doi.org/10.2478/aut-2021-0021","url":null,"abstract":"Abstract The article presents changes that took place in the textile and apparel (T&A) industry in Poland in the years 2004–2020. To describe the changes, we adopted the supply chain management perspective, which allowed for a global view of the changes taking place. We discuss the basic characteristics, such as the size and structure of the industry, innovation, production value, and the use of information and communications technology (ICT). In the research, we used the databases of the Central Statistical Office (GUS) on the sold production of the T&A industry, as well as imports and exports. Our research shows that, at the level of basic characteristics, the industry is close to the European model. However, it is characterized by a smaller share of small companies in the structure of enterprises. The research showed an upward trend in the production of sold textiles and, to a lesser extent, apparel. At the same time, the operation of the Polish T&A industry is influenced by the import of finished products and raw materials from China, Germany, Bangladesh, and Turkey. The export is directed to the German, Czech, Romanian, and Ukrainian markets. The article provides an overview of the development trends in the Polish T&A industry in the broad context of international conditions.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45628716","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Muhammad Hashim, Muhammad Nazam, Muhammad Zia-ur-Rehman, M. Abrar, S. Baig, M. Nazim, Zahid I. Hussain
Abstract Sustainability-related risk and vulnerability management have attained significant attention from academia and industry. Manufacturing industries in developing countries such as Pakistan are under severe economic pressure and striving to boost sustainable supply chain practices for achieving business excellence. In this context, the objectives of the present research are to examine the critical supply chain risks associated with sustainable development goals, namely social, economic, and environmental factors. The failure mode and effect analysis (FMEA) technique is employed for categorizing the risk factors and Pareto analysis for highlighting the more crucial and risky factors. For this purpose, a large-scale survey was carried out in the textile industries of Pakistan to develop a risk mitigation model for sustainability-related risks and vulnerability in a textile supply chain (TSC). It captures the input expressions of experts for risk factors, namely severity (s), occurrence (o), and detection (d) for calculating the risk priority numbers (RPNs) of identified alternatives. The results depict that endogenous environmental risks categorize as the most significant for the textile manufacturing industries, and the interfaces between the various risks associated with sustainability-related are also found very high. This study would be a toolkit for the industrial managers and policy-makers for creating sustainable manufacturing culture on organizational premises.
{"title":"Modeling Supply Chain Sustainability-Related Risks and Vulnerability: Insights from the Textile Sector of Pakistan","authors":"Muhammad Hashim, Muhammad Nazam, Muhammad Zia-ur-Rehman, M. Abrar, S. Baig, M. Nazim, Zahid I. Hussain","doi":"10.2478/aut-2021-0008","DOIUrl":"https://doi.org/10.2478/aut-2021-0008","url":null,"abstract":"Abstract Sustainability-related risk and vulnerability management have attained significant attention from academia and industry. Manufacturing industries in developing countries such as Pakistan are under severe economic pressure and striving to boost sustainable supply chain practices for achieving business excellence. In this context, the objectives of the present research are to examine the critical supply chain risks associated with sustainable development goals, namely social, economic, and environmental factors. The failure mode and effect analysis (FMEA) technique is employed for categorizing the risk factors and Pareto analysis for highlighting the more crucial and risky factors. For this purpose, a large-scale survey was carried out in the textile industries of Pakistan to develop a risk mitigation model for sustainability-related risks and vulnerability in a textile supply chain (TSC). It captures the input expressions of experts for risk factors, namely severity (s), occurrence (o), and detection (d) for calculating the risk priority numbers (RPNs) of identified alternatives. The results depict that endogenous environmental risks categorize as the most significant for the textile manufacturing industries, and the interfaces between the various risks associated with sustainability-related are also found very high. This study would be a toolkit for the industrial managers and policy-makers for creating sustainable manufacturing culture on organizational premises.","PeriodicalId":49104,"journal":{"name":"Autex Research Journal","volume":null,"pages":null},"PeriodicalIF":1.1,"publicationDate":"2021-05-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46265304","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：