F. Ait Hellal, C. Andreazza-Vignolle, P. Andreazza, J. Puibasset
A combination of experimental and numerical investigations on metallic silver and platinum nanoparticles deposited on silica substrates is presented, with a focus on metal–substrate interactions. Experimentally, the nanoparticles, obtained by ultra-high vacuum atom deposition, are characterized by grazing-incidence small-angle x-ray scattering and high resolution transmission electronic microscopy to determine their structure and morphology and, in particular, their aspect ratio (height/diameter), which quantifies the metal–substrate interaction, from the as-grown to equilibrium state. Numerically, the interactions between the metal and the silica species are modeled with the Lennard-Jones (12, 6) potential, with two parameters for each metal and silica species. The geometric parameters were found in the literature, while the energetic parameters were determined from our experimental measurements of the aspect ratio. The parameters are as follows: σAg–O = 0.278 nm, σAg–Si = 0.329 nm, ɛAg–O = 75 meV, and ɛAg–Si = 13 meV for Ag–silica and σPt–O = 0.273 nm, σPt–Si = 0.324 nm, ɛPt–O = 110 meV, and ɛPt–Si = 18 meV for Pt–silica. The proposed Ag–silica potential reproduces quantitatively the unexpected experimental observation of the variation of the aspect ratio for Ag nanoparticles larger than 5 nm, which has been interpreted as a consequence of the silica roughness. The nanoparticle orientation, structure, and disorder are also considered. This metal–silica potential for Ag and Pt should be helpful for further studies on pure metals as well as their alloys.
{"title":"Equilibrium structure and shape of Ag and Pt nanoparticles grown on silica surfaces: From experimental investigations to the determination of a metal–silica potential","authors":"F. Ait Hellal, C. Andreazza-Vignolle, P. Andreazza, J. Puibasset","doi":"10.1063/5.0200185","DOIUrl":"https://doi.org/10.1063/5.0200185","url":null,"abstract":"A combination of experimental and numerical investigations on metallic silver and platinum nanoparticles deposited on silica substrates is presented, with a focus on metal–substrate interactions. Experimentally, the nanoparticles, obtained by ultra-high vacuum atom deposition, are characterized by grazing-incidence small-angle x-ray scattering and high resolution transmission electronic microscopy to determine their structure and morphology and, in particular, their aspect ratio (height/diameter), which quantifies the metal–substrate interaction, from the as-grown to equilibrium state. Numerically, the interactions between the metal and the silica species are modeled with the Lennard-Jones (12, 6) potential, with two parameters for each metal and silica species. The geometric parameters were found in the literature, while the energetic parameters were determined from our experimental measurements of the aspect ratio. The parameters are as follows: σAg–O = 0.278 nm, σAg–Si = 0.329 nm, ɛAg–O = 75 meV, and ɛAg–Si = 13 meV for Ag–silica and σPt–O = 0.273 nm, σPt–Si = 0.324 nm, ɛPt–O = 110 meV, and ɛPt–Si = 18 meV for Pt–silica. The proposed Ag–silica potential reproduces quantitatively the unexpected experimental observation of the variation of the aspect ratio for Ag nanoparticles larger than 5 nm, which has been interpreted as a consequence of the silica roughness. The nanoparticle orientation, structure, and disorder are also considered. This metal–silica potential for Ag and Pt should be helpful for further studies on pure metals as well as their alloys.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"8 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140801282","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Produced by both nature and human activities, sulfur dioxide (SO2) is an important species in the earth's atmosphere. SO2 has also been found in the atmospheres of other planets and satellites in the solar system. The photoabsorption cross sections and photodissociation of SO2 have been studied for several decades. In this paper, we reported the experimental results for photodissociation dynamics of SO2 via the G̃1B1 state. By analyzing the images from the time-sliced velocity map ion imaging method, the vibrational state population distributions and anisotropy parameters were obtained for the O(1D2) + SO(X3Σ-, a1Δ, b1Σ+) and O(1S0) + SO(X3Σ-) channels, and the branching ratios for the channels O(1D2) + SO(X3Σ-), O(1D2) + SO(a1Δ), and O(1D2) + SO(b1Σ+) were determined to be ∼0.3, ∼0.6, and ∼0.1, respectively. The SO products were dominant in electronically and rovibrationally excited states, which may have yet unrecognized roles in the upper planetary atmosphere.
{"title":"Photodissociation dynamics of SO2 via the G̃1B1 state: The O(1D2) and O(1S0) product channels.","authors":"Yucheng Wu, Jitao Sun, Zhenxing Li, Zhaoxue Zhang, Zijie Luo, Yao Chang, Guorong Wu, Weiqing Zhang, Shengrui Yu, Kaijun Yuan, Xueming Yang","doi":"10.1063/5.0208090","DOIUrl":"https://doi.org/10.1063/5.0208090","url":null,"abstract":"Produced by both nature and human activities, sulfur dioxide (SO2) is an important species in the earth's atmosphere. SO2 has also been found in the atmospheres of other planets and satellites in the solar system. The photoabsorption cross sections and photodissociation of SO2 have been studied for several decades. In this paper, we reported the experimental results for photodissociation dynamics of SO2 via the G̃1B1 state. By analyzing the images from the time-sliced velocity map ion imaging method, the vibrational state population distributions and anisotropy parameters were obtained for the O(1D2) + SO(X3Σ-, a1Δ, b1Σ+) and O(1S0) + SO(X3Σ-) channels, and the branching ratios for the channels O(1D2) + SO(X3Σ-), O(1D2) + SO(a1Δ), and O(1D2) + SO(b1Σ+) were determined to be ∼0.3, ∼0.6, and ∼0.1, respectively. The SO products were dominant in electronically and rovibrationally excited states, which may have yet unrecognized roles in the upper planetary atmosphere.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"91 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140654958","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Wenyue Fan, Meng Hu, Lukun Feng, Xiao Luo, Yao Lu, Jing-Dong Bao
The motion of a particle along a channel of finite width is known to be affected by either the presence of energy barriers or changes in the bias forces along the channel direction. By using the lateral equilibrium hypothesis, we have successfully derived the effective diffusion coefficient for soft-walled channels, and the diffusion is found to be influenced by the curvature profile of the potential. A typical phenomenon of diffusion enhancement is observed under the appropriate parameter conditions. We first discovered an anomalous phenomenon of quasi-periodic enhancement of oscillations, which cannot be captured by the one-dimensional effective potential, under the combination of sub-Ohmic damping with two-dimensional restricted channels. We innovatively develop the effective potential and the formation mechanism of velocity variance under super-Ohmic and ballistic damping, and meanwhile, ergodicity is of concern. The theoretical framework of a ballistic system can be reinterpreted through the folding acceleration theory. This comprehensive analysis significantly enhances our understanding of diffusion processes in constrained geometries.
{"title":"In biased and soft-walled channels: Insights into transport phenomena and damped modulation.","authors":"Wenyue Fan, Meng Hu, Lukun Feng, Xiao Luo, Yao Lu, Jing-Dong Bao","doi":"10.1063/5.0195202","DOIUrl":"https://doi.org/10.1063/5.0195202","url":null,"abstract":"The motion of a particle along a channel of finite width is known to be affected by either the presence of energy barriers or changes in the bias forces along the channel direction. By using the lateral equilibrium hypothesis, we have successfully derived the effective diffusion coefficient for soft-walled channels, and the diffusion is found to be influenced by the curvature profile of the potential. A typical phenomenon of diffusion enhancement is observed under the appropriate parameter conditions. We first discovered an anomalous phenomenon of quasi-periodic enhancement of oscillations, which cannot be captured by the one-dimensional effective potential, under the combination of sub-Ohmic damping with two-dimensional restricted channels. We innovatively develop the effective potential and the formation mechanism of velocity variance under super-Ohmic and ballistic damping, and meanwhile, ergodicity is of concern. The theoretical framework of a ballistic system can be reinterpreted through the folding acceleration theory. This comprehensive analysis significantly enhances our understanding of diffusion processes in constrained geometries.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"26 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140655966","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A modified shoving model is applied to estimate the location of the glass transition in a one-component plasma. The estimated value of the coupling parameter Γ ≃ 570 at the glass transition is compared with other predictions available in the literature.
{"title":"Shoving model and the glass transition in one-component plasma.","authors":"S. Khrapak","doi":"10.1063/5.0207393","DOIUrl":"https://doi.org/10.1063/5.0207393","url":null,"abstract":"A modified shoving model is applied to estimate the location of the glass transition in a one-component plasma. The estimated value of the coupling parameter Γ ≃ 570 at the glass transition is compared with other predictions available in the literature.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"33 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140657553","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Nanoconfined water plays an important role in broad fields of science and engineering. Classical molecular dynamics (MD) simulations have been widely used to investigate water phases under nanoconfinement. The key ingredient of MD is the force field. In this study, we systematically investigated the performance of a recently introduced family of globally optimal water models, OPC and OPC3, and TIP4P/2005 in describing nanoconfined two-dimensional (2D) water ice. Our studies show that the melting points of the monolayer square ice (MSI) of all three water models are higher than the melting points of the corresponding bulk ice Ih. Under the same conditions, the melting points of MSI of OPC and TIP4P/2005 are the same and are ∼90 K lower than that of the OPC3 water model. In addition, we show that OPC and TIP4P/2005 water models are able to form a bilayer AA-stacked structure and a trilayer AAA-stacked structure, which are not the cases for the OPC3 model. Considering the available experimental data and first-principles simulations, we consider the OPC water model as a potential water model for 2D water ice MD studies.
{"title":"The performance of OPC and OPC3 water models in predictions of 2D structures under nanoconfinement.","authors":"Laiyang Wei, Xiaojiao Li, Qi Bai, Jing Kang, Jueying Song, Shuang Zhu, Lin Shen, Huan Wang, Chongqin Zhu, Wei-Hai Fang","doi":"10.1063/5.0202518","DOIUrl":"https://doi.org/10.1063/5.0202518","url":null,"abstract":"Nanoconfined water plays an important role in broad fields of science and engineering. Classical molecular dynamics (MD) simulations have been widely used to investigate water phases under nanoconfinement. The key ingredient of MD is the force field. In this study, we systematically investigated the performance of a recently introduced family of globally optimal water models, OPC and OPC3, and TIP4P/2005 in describing nanoconfined two-dimensional (2D) water ice. Our studies show that the melting points of the monolayer square ice (MSI) of all three water models are higher than the melting points of the corresponding bulk ice Ih. Under the same conditions, the melting points of MSI of OPC and TIP4P/2005 are the same and are ∼90 K lower than that of the OPC3 water model. In addition, we show that OPC and TIP4P/2005 water models are able to form a bilayer AA-stacked structure and a trilayer AAA-stacked structure, which are not the cases for the OPC3 model. Considering the available experimental data and first-principles simulations, we consider the OPC water model as a potential water model for 2D water ice MD studies.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"48 46","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140656859","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Identifying the stable surface phases under a given electrochemical conditions serves as the basis for studying the atomistic mechanism of reactions at solid/water interfaces. In this work, we systematically compare the performance of the two main approaches that are used to capture the impact of an aqueous environment, implicit and explicit solvent, on surface energies and phase diagrams. As a model system, we consider the magnesium/water interface with (i) Ca substitution and (ii) proton and hydroxyl adsorption. We show that while the implicit solvent model is computationally very efficient, it suffers from two shortcomings. First, the choice of the implicit solvent parameters significantly influences the energy landscape in the vicinity of the surface. The default parameters benchmarked on solvation in water underestimate the energy of the dissolved Mg ion and lead to spontaneous dissolution of the surface atom, resulting in large differences in the surface energetics. Second, in systems containing a charged surface and a solvated ion, the implicit solvent model may not converge to the energetically stable ionic charge state but remain in a high-energy metastable configuration, representing the neutral charge state of the ion. When these two issues are addressed, surface phase diagrams that closely match the explicit water results can be obtained. This makes the implicit solvent model highly attractive as a computationally-efficient surrogate model to compute surface energies and phase diagrams.
{"title":"Comparative analysis of surface phase diagrams in aqueous environment: Implicit vs explicit solvation models.","authors":"Jing Yang, M. Todorova, Jörg Neugebauer","doi":"10.1063/5.0190304","DOIUrl":"https://doi.org/10.1063/5.0190304","url":null,"abstract":"Identifying the stable surface phases under a given electrochemical conditions serves as the basis for studying the atomistic mechanism of reactions at solid/water interfaces. In this work, we systematically compare the performance of the two main approaches that are used to capture the impact of an aqueous environment, implicit and explicit solvent, on surface energies and phase diagrams. As a model system, we consider the magnesium/water interface with (i) Ca substitution and (ii) proton and hydroxyl adsorption. We show that while the implicit solvent model is computationally very efficient, it suffers from two shortcomings. First, the choice of the implicit solvent parameters significantly influences the energy landscape in the vicinity of the surface. The default parameters benchmarked on solvation in water underestimate the energy of the dissolved Mg ion and lead to spontaneous dissolution of the surface atom, resulting in large differences in the surface energetics. Second, in systems containing a charged surface and a solvated ion, the implicit solvent model may not converge to the energetically stable ionic charge state but remain in a high-energy metastable configuration, representing the neutral charge state of the ion. When these two issues are addressed, surface phase diagrams that closely match the explicit water results can be obtained. This makes the implicit solvent model highly attractive as a computationally-efficient surrogate model to compute surface energies and phase diagrams.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"1 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140653801","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jonathan R Owens, Bojun Feng, Jie Liu, David Moore
Metal organic frameworks (MOFs) are crystalline, three-dimensional structures with high surface areas and tunable porosities. Made from metal nodes connected by organic linkers, the exact properties of a given MOF are determined by node and linker choice. MOFs hold promise for numerous applications, including gas capture and storage. M2(4,4'-dioxidobiphenyl-3,3'-dicarboxylate)-henceforth simply M2(dobpdc), with M = Mg, Mn, Fe, Co, Ni, Cu, or Zn-is regarded as one of the most promising structures for CO2 capture applications. Further modification of the MOF with diamines or tetramines can significantly boost gas species selectivity, a necessity for the ultra-dilute CO2 concentrations in the direct-air capture of CO2. There are countless potential diamines and tetramines, paving the way for a vast number of potential sorbents to be probed for CO2 adsorption properties. The number of amines and their configuration in the MOF pore are key drivers of CO2 adsorption capacity and kinetics, and so a validation of computational prediction of these quantities is required to suitably use computational methods in the discovery and screening of amine-functionalized sorbents. In this work, we study the predictive accuracy of density functional theory and related calculations on amine loading and configuration for one diamine and two tetramines. In particular, we explore the Perdew-Burke-Ernzerhof (PBE) functional and its formulation for solids (PBEsol) with and without the Grimme-D2 and Grimme-D3 pairwise corrections (PBE+D2/3 and PBEsol+D2/3), two revised PBE functionals with the Grimme-D2 and Grimme-D3 pairwise corrections (RPBE+D2/3 and revPBE+D2/3), and the nonlocal van der Waals correlation (vdW-DF2) functional. We also investigate a universal graph deep learning interatomic potential's (M3GNet) predictive accuracy for loading and configuration. These results allow us to identify a useful screening procedure for configuration prediction that has a coarse component for quick evaluation and a higher accuracy component for detailed analysis. Our general observation is that the neural network-based potential can be used as a high-level and rapid screening tool, whereas PBEsol+D3 gives a completely qualitatively predictive picture across all systems studied, and can thus be used for high accuracy motif predictions. We close by briefly exploring the predictions of relative thermal stability for the different functionals and dispersion corrections.
{"title":"Understanding the effect of density functional choice and van der Waals treatment on predicting the binding configuration, loading, and stability of amine-grafted metal organic frameworks.","authors":"Jonathan R Owens, Bojun Feng, Jie Liu, David Moore","doi":"10.1063/5.0202963","DOIUrl":"https://doi.org/10.1063/5.0202963","url":null,"abstract":"Metal organic frameworks (MOFs) are crystalline, three-dimensional structures with high surface areas and tunable porosities. Made from metal nodes connected by organic linkers, the exact properties of a given MOF are determined by node and linker choice. MOFs hold promise for numerous applications, including gas capture and storage. M2(4,4'-dioxidobiphenyl-3,3'-dicarboxylate)-henceforth simply M2(dobpdc), with M = Mg, Mn, Fe, Co, Ni, Cu, or Zn-is regarded as one of the most promising structures for CO2 capture applications. Further modification of the MOF with diamines or tetramines can significantly boost gas species selectivity, a necessity for the ultra-dilute CO2 concentrations in the direct-air capture of CO2. There are countless potential diamines and tetramines, paving the way for a vast number of potential sorbents to be probed for CO2 adsorption properties. The number of amines and their configuration in the MOF pore are key drivers of CO2 adsorption capacity and kinetics, and so a validation of computational prediction of these quantities is required to suitably use computational methods in the discovery and screening of amine-functionalized sorbents. In this work, we study the predictive accuracy of density functional theory and related calculations on amine loading and configuration for one diamine and two tetramines. In particular, we explore the Perdew-Burke-Ernzerhof (PBE) functional and its formulation for solids (PBEsol) with and without the Grimme-D2 and Grimme-D3 pairwise corrections (PBE+D2/3 and PBEsol+D2/3), two revised PBE functionals with the Grimme-D2 and Grimme-D3 pairwise corrections (RPBE+D2/3 and revPBE+D2/3), and the nonlocal van der Waals correlation (vdW-DF2) functional. We also investigate a universal graph deep learning interatomic potential's (M3GNet) predictive accuracy for loading and configuration. These results allow us to identify a useful screening procedure for configuration prediction that has a coarse component for quick evaluation and a higher accuracy component for detailed analysis. Our general observation is that the neural network-based potential can be used as a high-level and rapid screening tool, whereas PBEsol+D3 gives a completely qualitatively predictive picture across all systems studied, and can thus be used for high accuracy motif predictions. We close by briefly exploring the predictions of relative thermal stability for the different functionals and dispersion corrections.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"19 11","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140661476","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Diana M Arvelo, Clara Garcia-Sacristan, E. Chacón, P. Tarazona, Ricardo García
Collagen is the most abundant structural protein in mammals. Type I collagen in its fibril form has a characteristic pattern structure that alternates two regions called gap and overlap. The structure and properties of collagens are highly dependent on the water and mineral content of the environment. Here, we apply 3D AFM to characterize at angstrom-scale resolution the interfacial water structure of collagen nanoribbons. For a neutral tip, the interfacial water structure is characterized by the oscillation of the water particle density distribution with a value of 0.3 nm (hydration layers). The interfacial structure does not depend on the collagen region. For a negatively charged tip, the interfacial structure might depend on the collagen region. Hydration layers are observed in overlap regions, while in gap regions, the interfacial solvent structure is dominated by electrostatic interactions. These interactions generate interlayer distances of 0.2 nm.
胶原蛋白是哺乳动物体内最丰富的结构蛋白。纤维状的 I 型胶原蛋白具有一种特征性的模式结构，交替出现称为间隙和重叠的两个区域。胶原蛋白的结构和特性高度依赖于环境中的水分和矿物质含量。在此，我们应用三维原子力显微镜以埃级分辨率表征胶原蛋白纳米带的界面水结构。对于中性针尖，界面水结构的特征是水颗粒密度分布的振荡值为 0.3 nm（水合层）。界面结构与胶原区域无关。对于带负电荷的针尖，界面结构可能取决于胶原区域。在重叠区域可以观察到水合层，而在间隙区域，界面溶剂结构主要由静电相互作用产生。这些相互作用产生了 0.2 nm 的层间距离。
{"title":"Interfacial water on collagen nanoribbons by 3D AFM.","authors":"Diana M Arvelo, Clara Garcia-Sacristan, E. Chacón, P. Tarazona, Ricardo García","doi":"10.1063/5.0205611","DOIUrl":"https://doi.org/10.1063/5.0205611","url":null,"abstract":"Collagen is the most abundant structural protein in mammals. Type I collagen in its fibril form has a characteristic pattern structure that alternates two regions called gap and overlap. The structure and properties of collagens are highly dependent on the water and mineral content of the environment. Here, we apply 3D AFM to characterize at angstrom-scale resolution the interfacial water structure of collagen nanoribbons. For a neutral tip, the interfacial water structure is characterized by the oscillation of the water particle density distribution with a value of 0.3 nm (hydration layers). The interfacial structure does not depend on the collagen region. For a negatively charged tip, the interfacial structure might depend on the collagen region. Hydration layers are observed in overlap regions, while in gap regions, the interfacial solvent structure is dominated by electrostatic interactions. These interactions generate interlayer distances of 0.2 nm.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"63 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140664046","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Common G0W0 implementations rely on numerical or analytical frequency integration to determine the G0W0 self-energy, which results in a variety of practical complications. Recently, we have demonstrated an exact connection between the G0W0 approximation and equation-of-motion quantum chemistry approaches [J. Tölle and G. Kin-Lic Chan, J. Chem. Phys. 158, 124123 (2023)]. Based on this connection, we propose a new method to determine G0W0 quasiparticle energies, which completely avoids frequency integration and its associated problems. To achieve this, we make use of an auxiliary boson (AB) expansion. We name the new approach AB-G0W0 and demonstrate its practical applicability in a range of molecular problems.
常见的 G0W0 实现依赖于数值或分析频率积分来确定 G0W0 自能，这导致了各种实际的复杂问题。最近，我们证明了 G0W0 近似与运动方程量子化学方法之间的精确联系[J. Tölle and G. Kin-Lic Chan, J. Chem. Phys. 158, 124123 (2023)]。基于这种联系，我们提出了一种确定 G0W0 准粒子能量的新方法，它完全避免了频率积分及其相关问题。为此，我们利用了辅助玻色子（AB）展开。我们将新方法命名为 AB-G0W0，并展示了它在一系列分子问题中的实际应用性。
{"title":"AB-G0W0: A practical G0W0 method without frequency integration based on an auxiliary boson expansion","authors":"Johannes Tölle, Garnet Kin-Lic Chan","doi":"10.1063/5.0195934","DOIUrl":"https://doi.org/10.1063/5.0195934","url":null,"abstract":"Common G0W0 implementations rely on numerical or analytical frequency integration to determine the G0W0 self-energy, which results in a variety of practical complications. Recently, we have demonstrated an exact connection between the G0W0 approximation and equation-of-motion quantum chemistry approaches [J. Tölle and G. Kin-Lic Chan, J. Chem. Phys. 158, 124123 (2023)]. Based on this connection, we propose a new method to determine G0W0 quasiparticle energies, which completely avoids frequency integration and its associated problems. To achieve this, we make use of an auxiliary boson (AB) expansion. We name the new approach AB-G0W0 and demonstrate its practical applicability in a range of molecular problems.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140801289","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Luchao Du, Jie An, Tetsuro Katayama, Menghan Duan, XiaoPing Shi, Yunpeng Wang, Akihiro Furube
In recent years, all-inorganic perovskite materials have become an ideal choice for new thin film solar cells due to their excellent photophysical properties and have become a research hotspot. Studying the ultrafast dynamics of photo-generated carriers is of great significance for further improving the performance of such devices. In this work, we focus on the transient dynamic process of CsPbBr3/TiO2 composite systems with different Mn2+ doping contents using femtosecond transient absorption spectroscopy technology. We used singular value decomposition and global fitting to analyze the transient absorption spectra and obtained three components, which are classified as hot carrier cooling, charge transfer, and charge recombination processes, respectively. We found that the doping concentration of Mn2+ has an impact on all three processes. We think that the following two factors are responsible: one is the density of defect states and the other is the bandgap width of perovskite. As the concentration of doped Mn2+ increases, the charge transfer time constant shows a trend of initially increasing, followed by a subsequent decrease, reaching a turning point. This indicates that an appropriate amount of Mn2+ doping can effectively improve the photoelectric performance of solar cell systems. We proposed a possible charge transfer mechanism model and further elucidated the microscopic mechanism of the effect of Mn2+ doping on the interface charge transfer process of the CsPbBr3/TiO2 solar cell system.
{"title":"Photogenerated carrier dynamics of Mn2+ doped CsPbBr3 assembled with TiO2 systems: Effect of Mn doping content.","authors":"Luchao Du, Jie An, Tetsuro Katayama, Menghan Duan, XiaoPing Shi, Yunpeng Wang, Akihiro Furube","doi":"10.1063/5.0197068","DOIUrl":"https://doi.org/10.1063/5.0197068","url":null,"abstract":"In recent years, all-inorganic perovskite materials have become an ideal choice for new thin film solar cells due to their excellent photophysical properties and have become a research hotspot. Studying the ultrafast dynamics of photo-generated carriers is of great significance for further improving the performance of such devices. In this work, we focus on the transient dynamic process of CsPbBr3/TiO2 composite systems with different Mn2+ doping contents using femtosecond transient absorption spectroscopy technology. We used singular value decomposition and global fitting to analyze the transient absorption spectra and obtained three components, which are classified as hot carrier cooling, charge transfer, and charge recombination processes, respectively. We found that the doping concentration of Mn2+ has an impact on all three processes. We think that the following two factors are responsible: one is the density of defect states and the other is the bandgap width of perovskite. As the concentration of doped Mn2+ increases, the charge transfer time constant shows a trend of initially increasing, followed by a subsequent decrease, reaching a turning point. This indicates that an appropriate amount of Mn2+ doping can effectively improve the photoelectric performance of solar cell systems. We proposed a possible charge transfer mechanism model and further elucidated the microscopic mechanism of the effect of Mn2+ doping on the interface charge transfer process of the CsPbBr3/TiO2 solar cell system.","PeriodicalId":501648,"journal":{"name":"The Journal of Chemical Physics","volume":"4 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140661905","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：