Pub Date : 2024-03-26DOI: 10.3390/acoustics6020016
Yumei Zhang, Jie Zhang, Ye Li, Dan Yao, Yue Zhao, Yi Ai, Weijun Pan, Jiang-Qiang Li
Acoustic metamaterials (AMs) composed of periodic artificial structures have extraordinary sound wave manipulation capabilities compared with traditional acoustic materials, and they have attracted widespread research attention. The sound insulation performance of thin-walled structures commonly used in engineering applications with restricted space, for example, vehicles’ body structures, and the latest studies on the sound insulation of thin-walled metamaterial structures, are comprehensively discussed in this paper. First, the definition and math law of sound insulation are introduced, alongside the primary methods of sound insulation testing of specimens. Secondly, the main sound insulation acoustic metamaterial structures are summarized and classified, including membrane-type, plate-type, and smart-material-type sound insulation metamaterials, boundaries, and temperature effects, as well as the sound insulation research on composite structures combined with metamaterial structures. Finally, the research status, challenges, and trends of sound insulation metamaterial structures are summarized. It was found that combining the advantages of metamaterial and various composite panel structures with optimization methods considering lightweight and proper wide frequency band single evaluator has the potential to improve the sound insulation performance of composite metamaterials in the full frequency range. Relative review results provide a comprehensive reference for the sound insulation metamaterial design and application.
{"title":"Research Progress on Thin-Walled Sound Insulation Metamaterial Structures","authors":"Yumei Zhang, Jie Zhang, Ye Li, Dan Yao, Yue Zhao, Yi Ai, Weijun Pan, Jiang-Qiang Li","doi":"10.3390/acoustics6020016","DOIUrl":"https://doi.org/10.3390/acoustics6020016","url":null,"abstract":"Acoustic metamaterials (AMs) composed of periodic artificial structures have extraordinary sound wave manipulation capabilities compared with traditional acoustic materials, and they have attracted widespread research attention. The sound insulation performance of thin-walled structures commonly used in engineering applications with restricted space, for example, vehicles’ body structures, and the latest studies on the sound insulation of thin-walled metamaterial structures, are comprehensively discussed in this paper. First, the definition and math law of sound insulation are introduced, alongside the primary methods of sound insulation testing of specimens. Secondly, the main sound insulation acoustic metamaterial structures are summarized and classified, including membrane-type, plate-type, and smart-material-type sound insulation metamaterials, boundaries, and temperature effects, as well as the sound insulation research on composite structures combined with metamaterial structures. Finally, the research status, challenges, and trends of sound insulation metamaterial structures are summarized. It was found that combining the advantages of metamaterial and various composite panel structures with optimization methods considering lightweight and proper wide frequency band single evaluator has the potential to improve the sound insulation performance of composite metamaterials in the full frequency range. Relative review results provide a comprehensive reference for the sound insulation metamaterial design and application.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":"58 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140378437","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-03-11DOI: 10.3390/acoustics6010015
Long Bin Tan, L. Ang
This study aims to tackle the challenge of high noise levels on balconies while preserving natural ventilation. Eight innovative balcony designs, incorporating elements like diffuser edges, undulating ceilings, Helmholtz resonators, grooves, or sound traps, were evaluated via finite element (FE) modeling. The insertion loss results showed that for many balcony designs, noise reduction in the balcony could deteriorate beyond an elevation of 8 m. However, the front jagged and full wavy ceiling designs were shown to be more robust in noise attenuation across balconies on different floors. The jagged ledge and grooved parapet designs yielded an overall 1.5 dBA lower SPL at the exterior regions, compared to other designs, which implies that the designs are less acoustically detrimental to nearby residential blocks as they tend to diffract and absorb incident noise. The jagged ledge design is more effective for lower floors while the jagged ceiling design is more effective for higher floors. A combination of the protruded jagged ledge for the lower floor and jagged balcony ceiling for the higher floor would result in the lowest noise ingress over three stories of residential units: this would be capable of achieving more than 3 dB noise reduction and would offer viable options for improving balcony noise mitigation, by providing valuable insights to architects and designers seeking practical solutions for outdoor noise reduction. Our study highlights that whereas the spectrum characteristics of acoustic absorption materials may be less tunable, and where reduced head space is traded for thicker material for greater ab-sorption and added affixation and maintenance cost, the jagged ledge and ceiling curvatures can actually be shape-tuned, say for every 3 to 4 floors up the high-rise to more effective reduce noise ingress and possibly improve the architecture façade outlook.
{"title":"Performance Evaluation of Balcony Designs for Mitigating Ground Level Noise","authors":"Long Bin Tan, L. Ang","doi":"10.3390/acoustics6010015","DOIUrl":"https://doi.org/10.3390/acoustics6010015","url":null,"abstract":"This study aims to tackle the challenge of high noise levels on balconies while preserving natural ventilation. Eight innovative balcony designs, incorporating elements like diffuser edges, undulating ceilings, Helmholtz resonators, grooves, or sound traps, were evaluated via finite element (FE) modeling. The insertion loss results showed that for many balcony designs, noise reduction in the balcony could deteriorate beyond an elevation of 8 m. However, the front jagged and full wavy ceiling designs were shown to be more robust in noise attenuation across balconies on different floors. The jagged ledge and grooved parapet designs yielded an overall 1.5 dBA lower SPL at the exterior regions, compared to other designs, which implies that the designs are less acoustically detrimental to nearby residential blocks as they tend to diffract and absorb incident noise. The jagged ledge design is more effective for lower floors while the jagged ceiling design is more effective for higher floors. A combination of the protruded jagged ledge for the lower floor and jagged balcony ceiling for the higher floor would result in the lowest noise ingress over three stories of residential units: this would be capable of achieving more than 3 dB noise reduction and would offer viable options for improving balcony noise mitigation, by providing valuable insights to architects and designers seeking practical solutions for outdoor noise reduction. Our study highlights that whereas the spectrum characteristics of acoustic absorption materials may be less tunable, and where reduced head space is traded for thicker material for greater ab-sorption and added affixation and maintenance cost, the jagged ledge and ceiling curvatures can actually be shape-tuned, say for every 3 to 4 floors up the high-rise to more effective reduce noise ingress and possibly improve the architecture façade outlook.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":"99 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140251898","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-03-10DOI: 10.3390/acoustics6010014
Georgios P. Georgiou, A. Giannakou
Investigating heritage language (HL)-contact effects on the dominant language has received limited attention despite its importance in understanding the dynamic interplay between linguistic systems in situations of bilingualism. This study compares the acoustic characteristics of Greek vowels produced by heritage speakers (HSs) of Albanian and monolingual Greek speakers, aiming to identify potential differences and explain them. The participants were adult second-generation HSs of Albanian with Greek as their dominant language, born and raised in Greece. A control group of age-matched monolingual Greek speakers was included for comparison purposes. All participants engaged in a controlled speech production task, with the data segmented to extract acoustic values pertaining to the first three formants and the duration of Greek vowels. Bayesian regression models were employed for the subsequent statistical analysis. The results demonstrated differences in the first three formants of certain vowels and the duration of all vowels. These differences can be attributed to the crosslinguistic effect of HL on the dominant language, as well as the interplay between the dynamic and internalized language system of the speakers and the complex effect of the sociophonetic context. These outcomes contribute to the hypothesis positing the emergence of deflected phonetic categories among a distinctive group of bilinguals, namely HSs. Furthermore, this study underscores the significance of a comprehensive exploration of the sociophonetic context of HSs for a nuanced understanding of their phonetic patterns.
{"title":"Acoustic Characteristics of Greek Vowels Produced by Adult Heritage Speakers of Albanian","authors":"Georgios P. Georgiou, A. Giannakou","doi":"10.3390/acoustics6010014","DOIUrl":"https://doi.org/10.3390/acoustics6010014","url":null,"abstract":"Investigating heritage language (HL)-contact effects on the dominant language has received limited attention despite its importance in understanding the dynamic interplay between linguistic systems in situations of bilingualism. This study compares the acoustic characteristics of Greek vowels produced by heritage speakers (HSs) of Albanian and monolingual Greek speakers, aiming to identify potential differences and explain them. The participants were adult second-generation HSs of Albanian with Greek as their dominant language, born and raised in Greece. A control group of age-matched monolingual Greek speakers was included for comparison purposes. All participants engaged in a controlled speech production task, with the data segmented to extract acoustic values pertaining to the first three formants and the duration of Greek vowels. Bayesian regression models were employed for the subsequent statistical analysis. The results demonstrated differences in the first three formants of certain vowels and the duration of all vowels. These differences can be attributed to the crosslinguistic effect of HL on the dominant language, as well as the interplay between the dynamic and internalized language system of the speakers and the complex effect of the sociophonetic context. These outcomes contribute to the hypothesis positing the emergence of deflected phonetic categories among a distinctive group of bilinguals, namely HSs. Furthermore, this study underscores the significance of a comprehensive exploration of the sociophonetic context of HSs for a nuanced understanding of their phonetic patterns.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":"60 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140255888","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-03-06DOI: 10.3390/acoustics6010013
Luigi Lombardi, G. Matarrese, C. Marzocca
The quartz tuning fork used as an acoustic sensor in quartz-enhanced photo-acoustic spectroscopy gas detection systems is usually read out by means of a transimpedance preamplifier based on a low-noise operational amplifier closed in a feedback loop. The gain–bandwidth product of the operational amplifier used in the circuit is a key parameter which must be properly chosen to guarantee that the circuit works as expected. Here, we demonstrate that if the value of this parameter is not sufficiently large, the response of the preamplifier exhibits a peak at a frequency which does not coincide with the series resonant frequency of the quartz tuning fork. If this peak frequency is selected for modulating the laser bias current and is also used as the reference frequency of the lock-in amplifier, a penalty results in terms of signal-to-noise ratio at the output of the QEPAS sensor. This worsens the performance of the gas sensing system in terms of ultimate detection limits. We show that this happens when the front-end preamplifier of the quartz tuning fork is based on some amplifier models that are typically used for such application, both when the integration time of the lock-in amplifier filter is long, to boost noise rejection, and when it is short, in order to comply with a relevant measurement rate.
{"title":"Influence of the Gain–Bandwidth of the Front-End Amplifier on the Performance of a QEPAS Sensor","authors":"Luigi Lombardi, G. Matarrese, C. Marzocca","doi":"10.3390/acoustics6010013","DOIUrl":"https://doi.org/10.3390/acoustics6010013","url":null,"abstract":"The quartz tuning fork used as an acoustic sensor in quartz-enhanced photo-acoustic spectroscopy gas detection systems is usually read out by means of a transimpedance preamplifier based on a low-noise operational amplifier closed in a feedback loop. The gain–bandwidth product of the operational amplifier used in the circuit is a key parameter which must be properly chosen to guarantee that the circuit works as expected. Here, we demonstrate that if the value of this parameter is not sufficiently large, the response of the preamplifier exhibits a peak at a frequency which does not coincide with the series resonant frequency of the quartz tuning fork. If this peak frequency is selected for modulating the laser bias current and is also used as the reference frequency of the lock-in amplifier, a penalty results in terms of signal-to-noise ratio at the output of the QEPAS sensor. This worsens the performance of the gas sensing system in terms of ultimate detection limits. We show that this happens when the front-end preamplifier of the quartz tuning fork is based on some amplifier models that are typically used for such application, both when the integration time of the lock-in amplifier filter is long, to boost noise rejection, and when it is short, in order to comply with a relevant measurement rate.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":"42 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140262750","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-03-06DOI: 10.3390/acoustics6010012
Domingo Pardo-Quiles, I. Rodríguez-Rodríguez, J. Rodríguez
The main goal of this research was to design and study the best structure, location, and shape of acoustic diffusers to be fitted on the ceilings of multipurpose auditoriums. Their absorbing properties can enhance the acoustics when installed on high ceilings, and behind suspended reflecting panels, by mitigating or nullifying specular reflections that could overcome the panels and, thus, avoiding time delay gaps exceeding 30–40 ms compared with the direct sound. For this purpose, a typical medium-sized room, with inclined floors, a stage, and 20 rows of seats, was considered. The allocation and height of the considered diffusers were based on the Schroeder quadratic residue sequence, and they were modeled as rectangles, wedges, cylinders, and Y-shaped elements. A standardized speech source spectrum was analyzed for up to five different receiver locations. In this way, the attenuation parameter as a function of frequency was evaluated and compared between the candidate diffusers in order to identify the best absorber. The simulations were undertaken with a software tool previously validated by the authors called PARDOS, which incorporates an innovative formulation based on the uniform theory of diffraction (UTD) to analyze multiple diffractions and reflections of acoustic waves. The results show that the new Y-shaped diffusers proposed, tuned for the hearing frequency band from 250 Hz up to 10,000 Hz, attained the best acoustic performance in terms of absorption.
这项研究的主要目的是设计和研究安装在多功能礼堂天花板上的声扩散器的最佳结构、位置和形状。当安装在高天花板上和悬挂反射板后面时，它们的吸音特性可以通过减轻或消除可能穿过反射板的镜面反射来增强声学效果，从而避免与直达声相比超过 30-40 毫秒的时间延迟间隙。为此，我们考虑了一个典型的中型房间，它有倾斜的地板、一个舞台和 20 排座位。所考虑的扩散器的分配和高度基于 Schroeder 二次残差序列，它们被模拟为矩形、楔形、圆柱形和 Y 形元素。对多达五个不同接收器位置的标准化语音源频谱进行了分析。通过这种方法，评估了衰减参数与频率的函数关系，并对候选扩散器进行了比较，以确定最佳吸收器。模拟是通过作者之前验证过的一款名为 PARDOS 的软件工具进行的，该软件工具采用了基于均匀衍射理论（UTD）的创新公式来分析声波的多重衍射和反射。结果表明，针对 250 Hz 至 10,000 Hz 的听力频段进行调整的新型 Y 形扩散器在吸声方面达到了最佳性能。
{"title":"Design of Optimal Sound Absorbers Using Acoustic Diffusers for Multipurpose Auditoriums","authors":"Domingo Pardo-Quiles, I. Rodríguez-Rodríguez, J. Rodríguez","doi":"10.3390/acoustics6010012","DOIUrl":"https://doi.org/10.3390/acoustics6010012","url":null,"abstract":"The main goal of this research was to design and study the best structure, location, and shape of acoustic diffusers to be fitted on the ceilings of multipurpose auditoriums. Their absorbing properties can enhance the acoustics when installed on high ceilings, and behind suspended reflecting panels, by mitigating or nullifying specular reflections that could overcome the panels and, thus, avoiding time delay gaps exceeding 30–40 ms compared with the direct sound. For this purpose, a typical medium-sized room, with inclined floors, a stage, and 20 rows of seats, was considered. The allocation and height of the considered diffusers were based on the Schroeder quadratic residue sequence, and they were modeled as rectangles, wedges, cylinders, and Y-shaped elements. A standardized speech source spectrum was analyzed for up to five different receiver locations. In this way, the attenuation parameter as a function of frequency was evaluated and compared between the candidate diffusers in order to identify the best absorber. The simulations were undertaken with a software tool previously validated by the authors called PARDOS, which incorporates an innovative formulation based on the uniform theory of diffraction (UTD) to analyze multiple diffractions and reflections of acoustic waves. The results show that the new Y-shaped diffusers proposed, tuned for the hearing frequency band from 250 Hz up to 10,000 Hz, attained the best acoustic performance in terms of absorption.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":"138 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140078550","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-20DOI: 10.3390/acoustics6010011
Alexander Lange, Ronghua Xu, Max Kaeding, Steffen Marx, Joern Ostermann
Regular inspections of important civil infrastructures are mandatory to ensure structural safety and reliability. Until today, these inspections are primarily conducted manually, which has several deficiencies. In context of prestressed concrete structures, steel tendons can be susceptible to stress corrosion cracking, which may result in breakage of individual wires that is visually not observable. Recent research therefore suggests Acoustic Emission Monitoring for wire break detection in prestressed concrete structures. However, in noisy environments, such as wind turbines, conventional acoustic emission detection based on user-defined amplitude thresholds may not be suitable. Thus, we propose the use of matched filters for acoustic emission detection in noisy environments and apply the proposed method to the task of wire break detection in post-tensioned wind turbine towers. Based on manually conducted wire breaks and rebound hammer tests on a large-scale test frame, we employ a brute-force search for the most suitable query signal of a wire break event and a rebound hammer impact, respectively. Then, we evaluate the signal detection performance on more than 500 other wire break signals and approximately one week of continuous acoustic emission recordings in an operating wind turbine. For a signal-to-noise ratio of 0 dB, the matched filter approach shows an improvement in AUC by up to 0.78 for both, the wire break and the rebound hammer query signal, compared to state-of-the-art amplitude-based detection. Even for the unscaled wire break measurements originally recorded at the 12 m large laboratory test frame, the improvement in AUC still lies between 0.01 and 0.25 depending on the wind turbine noise recordings considered for evaluation. Matched filters may therefore be a promising alternative to amplitude-based detection algorithms and deserve particular consideration with regard to Acoustic Emission Monitoring, especially in noisy environments or when sparse senor networks are required.
{"title":"Matched Filter for Acoustic Emission Monitoring in Noisy Environments: Application to Wire Break Detection","authors":"Alexander Lange, Ronghua Xu, Max Kaeding, Steffen Marx, Joern Ostermann","doi":"10.3390/acoustics6010011","DOIUrl":"https://doi.org/10.3390/acoustics6010011","url":null,"abstract":"Regular inspections of important civil infrastructures are mandatory to ensure structural safety and reliability. Until today, these inspections are primarily conducted manually, which has several deficiencies. In context of prestressed concrete structures, steel tendons can be susceptible to stress corrosion cracking, which may result in breakage of individual wires that is visually not observable. Recent research therefore suggests Acoustic Emission Monitoring for wire break detection in prestressed concrete structures. However, in noisy environments, such as wind turbines, conventional acoustic emission detection based on user-defined amplitude thresholds may not be suitable. Thus, we propose the use of matched filters for acoustic emission detection in noisy environments and apply the proposed method to the task of wire break detection in post-tensioned wind turbine towers. Based on manually conducted wire breaks and rebound hammer tests on a large-scale test frame, we employ a brute-force search for the most suitable query signal of a wire break event and a rebound hammer impact, respectively. Then, we evaluate the signal detection performance on more than 500 other wire break signals and approximately one week of continuous acoustic emission recordings in an operating wind turbine. For a signal-to-noise ratio of 0 dB, the matched filter approach shows an improvement in AUC by up to 0.78 for both, the wire break and the rebound hammer query signal, compared to state-of-the-art amplitude-based detection. Even for the unscaled wire break measurements originally recorded at the 12 m large laboratory test frame, the improvement in AUC still lies between 0.01 and 0.25 depending on the wind turbine noise recordings considered for evaluation. Matched filters may therefore be a promising alternative to amplitude-based detection algorithms and deserve particular consideration with regard to Acoustic Emission Monitoring, especially in noisy environments or when sparse senor networks are required.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":"89 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140449395","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-08DOI: 10.3390/acoustics6010010
Fabian Heisterkamp
Determining reliable noise emission values for machinery is key to successfully implement the Sell and Buy Quiet concept. ISO 11202 is a basic noise emission standard to determine the emission sound pressure level of machines outside of special acoustic test rooms (in situ measurements) and enables machinery manufacturers to determine the noise emission data of their products within their own premises. However, a recent amendment to this standard was made on the basis of an unsatisfactory amount of experimental data. Therefore, this paper systematically examines the validity and accuracy of the amended part of the method. It answers the question, whether the amendment represents an improvement of the existing method. Measurements on a model machine with two configurations allow for an extensive investigation of the effects of the amendment. To that end, the emission sound pressure levels at eight positions near the machine are determined in three different acoustic environments. One finds that the amendment leads to an overestimation of the local environmental correction for the LpA, which, in turn, could lead to an underestimation of the determined emission sound pressure level.
{"title":"Machine Noise—Experimental Study of the Local Environmental Correction for the Emission Sound Pressure Level","authors":"Fabian Heisterkamp","doi":"10.3390/acoustics6010010","DOIUrl":"https://doi.org/10.3390/acoustics6010010","url":null,"abstract":"Determining reliable noise emission values for machinery is key to successfully implement the Sell and Buy Quiet concept. ISO 11202 is a basic noise emission standard to determine the emission sound pressure level of machines outside of special acoustic test rooms (in situ measurements) and enables machinery manufacturers to determine the noise emission data of their products within their own premises. However, a recent amendment to this standard was made on the basis of an unsatisfactory amount of experimental data. Therefore, this paper systematically examines the validity and accuracy of the amended part of the method. It answers the question, whether the amendment represents an improvement of the existing method. Measurements on a model machine with two configurations allow for an extensive investigation of the effects of the amendment. To that end, the emission sound pressure levels at eight positions near the machine are determined in three different acoustic environments. One finds that the amendment leads to an overestimation of the local environmental correction for the LpA, which, in turn, could lead to an underestimation of the determined emission sound pressure level.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":" 16","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139792040","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-08DOI: 10.3390/acoustics6010010
Fabian Heisterkamp
Determining reliable noise emission values for machinery is key to successfully implement the Sell and Buy Quiet concept. ISO 11202 is a basic noise emission standard to determine the emission sound pressure level of machines outside of special acoustic test rooms (in situ measurements) and enables machinery manufacturers to determine the noise emission data of their products within their own premises. However, a recent amendment to this standard was made on the basis of an unsatisfactory amount of experimental data. Therefore, this paper systematically examines the validity and accuracy of the amended part of the method. It answers the question, whether the amendment represents an improvement of the existing method. Measurements on a model machine with two configurations allow for an extensive investigation of the effects of the amendment. To that end, the emission sound pressure levels at eight positions near the machine are determined in three different acoustic environments. One finds that the amendment leads to an overestimation of the local environmental correction for the LpA, which, in turn, could lead to an underestimation of the determined emission sound pressure level.
{"title":"Machine Noise—Experimental Study of the Local Environmental Correction for the Emission Sound Pressure Level","authors":"Fabian Heisterkamp","doi":"10.3390/acoustics6010010","DOIUrl":"https://doi.org/10.3390/acoustics6010010","url":null,"abstract":"Determining reliable noise emission values for machinery is key to successfully implement the Sell and Buy Quiet concept. ISO 11202 is a basic noise emission standard to determine the emission sound pressure level of machines outside of special acoustic test rooms (in situ measurements) and enables machinery manufacturers to determine the noise emission data of their products within their own premises. However, a recent amendment to this standard was made on the basis of an unsatisfactory amount of experimental data. Therefore, this paper systematically examines the validity and accuracy of the amended part of the method. It answers the question, whether the amendment represents an improvement of the existing method. Measurements on a model machine with two configurations allow for an extensive investigation of the effects of the amendment. To that end, the emission sound pressure levels at eight positions near the machine are determined in three different acoustic environments. One finds that the amendment leads to an overestimation of the local environmental correction for the LpA, which, in turn, could lead to an underestimation of the determined emission sound pressure level.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":"43 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139851745","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-01DOI: 10.3390/acoustics6010009
O. Scussel, M. Brennan, J. Muggleton, F. C. L. de Almeida, Phillip F. Joseph, Yan Gao
In buried plastic water pipes, the predominantly fluid-borne wave is of particular interest, as it plays a key role in the propagation of leak noise. Consequently, it has been studied by several researchers to determine the speed of wave propagation and its attenuation with distance. These features are encapsulated in the wavenumber. By examining the factors that govern the behaviour of this wavenumber, this paper presents an in-depth examination of the physical mechanisms of leak noise propagation. To achieve this, an alternative physics-based model for the wavenumber is developed, using the concept of the wave dynamic stiffnesses of the individual components within the pipe system, i.e., the water in the pipe, the pipe wall, and the surrounding medium. This facilitates a clear interpretation of the wave behaviour in terms of the physical properties of the system, especially the interface between the pipe and the surrounding medium, which can have a profound influence on the leakage of acoustic energy from the pipe wall into the external medium. Three systems with different types of surrounding medium are studied, and the factors that govern leak noise propagation in each case are identified. Experimental results on two distinct test sites from different parts of the world are provided to validate the approach using leak noise as an excitation mechanism.
{"title":"An Investigation into the Physical Mechanisms of Leak Noise Propagation in Buried Plastic Water Pipes: A Wave Dynamic Stiffness Approach","authors":"O. Scussel, M. Brennan, J. Muggleton, F. C. L. de Almeida, Phillip F. Joseph, Yan Gao","doi":"10.3390/acoustics6010009","DOIUrl":"https://doi.org/10.3390/acoustics6010009","url":null,"abstract":"In buried plastic water pipes, the predominantly fluid-borne wave is of particular interest, as it plays a key role in the propagation of leak noise. Consequently, it has been studied by several researchers to determine the speed of wave propagation and its attenuation with distance. These features are encapsulated in the wavenumber. By examining the factors that govern the behaviour of this wavenumber, this paper presents an in-depth examination of the physical mechanisms of leak noise propagation. To achieve this, an alternative physics-based model for the wavenumber is developed, using the concept of the wave dynamic stiffnesses of the individual components within the pipe system, i.e., the water in the pipe, the pipe wall, and the surrounding medium. This facilitates a clear interpretation of the wave behaviour in terms of the physical properties of the system, especially the interface between the pipe and the surrounding medium, which can have a profound influence on the leakage of acoustic energy from the pipe wall into the external medium. Three systems with different types of surrounding medium are studied, and the factors that govern leak noise propagation in each case are identified. Experimental results on two distinct test sites from different parts of the world are provided to validate the approach using leak noise as an excitation mechanism.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":"19 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139872203","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-01DOI: 10.3390/acoustics6010009
O. Scussel, M. Brennan, J. Muggleton, F. C. L. de Almeida, Phillip F. Joseph, Yan Gao
In buried plastic water pipes, the predominantly fluid-borne wave is of particular interest, as it plays a key role in the propagation of leak noise. Consequently, it has been studied by several researchers to determine the speed of wave propagation and its attenuation with distance. These features are encapsulated in the wavenumber. By examining the factors that govern the behaviour of this wavenumber, this paper presents an in-depth examination of the physical mechanisms of leak noise propagation. To achieve this, an alternative physics-based model for the wavenumber is developed, using the concept of the wave dynamic stiffnesses of the individual components within the pipe system, i.e., the water in the pipe, the pipe wall, and the surrounding medium. This facilitates a clear interpretation of the wave behaviour in terms of the physical properties of the system, especially the interface between the pipe and the surrounding medium, which can have a profound influence on the leakage of acoustic energy from the pipe wall into the external medium. Three systems with different types of surrounding medium are studied, and the factors that govern leak noise propagation in each case are identified. Experimental results on two distinct test sites from different parts of the world are provided to validate the approach using leak noise as an excitation mechanism.
{"title":"An Investigation into the Physical Mechanisms of Leak Noise Propagation in Buried Plastic Water Pipes: A Wave Dynamic Stiffness Approach","authors":"O. Scussel, M. Brennan, J. Muggleton, F. C. L. de Almeida, Phillip F. Joseph, Yan Gao","doi":"10.3390/acoustics6010009","DOIUrl":"https://doi.org/10.3390/acoustics6010009","url":null,"abstract":"In buried plastic water pipes, the predominantly fluid-borne wave is of particular interest, as it plays a key role in the propagation of leak noise. Consequently, it has been studied by several researchers to determine the speed of wave propagation and its attenuation with distance. These features are encapsulated in the wavenumber. By examining the factors that govern the behaviour of this wavenumber, this paper presents an in-depth examination of the physical mechanisms of leak noise propagation. To achieve this, an alternative physics-based model for the wavenumber is developed, using the concept of the wave dynamic stiffnesses of the individual components within the pipe system, i.e., the water in the pipe, the pipe wall, and the surrounding medium. This facilitates a clear interpretation of the wave behaviour in terms of the physical properties of the system, especially the interface between the pipe and the surrounding medium, which can have a profound influence on the leakage of acoustic energy from the pipe wall into the external medium. Three systems with different types of surrounding medium are studied, and the factors that govern leak noise propagation in each case are identified. Experimental results on two distinct test sites from different parts of the world are provided to validate the approach using leak noise as an excitation mechanism.","PeriodicalId":502373,"journal":{"name":"Acoustics","volume":"36 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139812171","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：