The Sin Quyen deposit is characterized by a h igh accumulation of rare earth elements (REE). This deposit belongs to the IOCG type copper deposits (Iron Oxide Copper-Gold Deposits). In the deposit, the REE carrier minerals have been identified as follow: allanite, titanite, uraninite, monazite, apatite, chevkinite, aeschynite, bastnäsite, and epidote. In the skarn zone, contents of allanite range from single percentages to 10% in hand-size specimens. Locally, minerals of epidote subgroup which occur in large amounts in the host rocks are important. The studied allanites have concentrations of: REE (14
{"title":"Rare earth elements in the Sin Quyen IOCG deposit, North Vietnam","authors":"N. D. Chau, J. Pieczonka, A. Piestrzynski, Le Khanh Phon, D. Hao","doi":"10.24425/gsm.2022.140611","DOIUrl":"https://doi.org/10.24425/gsm.2022.140611","url":null,"abstract":"The Sin Quyen deposit is characterized by a h igh accumulation of rare earth elements (REE). This deposit belongs to the IOCG type copper deposits (Iron Oxide Copper-Gold Deposits). In the deposit, the REE carrier minerals have been identified as follow: allanite, titanite, uraninite, monazite, apatite, chevkinite, aeschynite, bastnäsite, and epidote. In the skarn zone, contents of allanite range from single percentages to 10% in hand-size specimens. Locally, minerals of epidote subgroup which occur in large amounts in the host rocks are important. The studied allanites have concentrations of: REE (14","PeriodicalId":50416,"journal":{"name":"Gospodarka Surowcami Mineralnymi-Mineral Resources Management","volume":"15 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2023-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91254729","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Article is devoted to sieve holes blocking and describes the impact of the content of blocking grains in the feed on this phenomenon. The process of screen blocking involves grains of varying size being blocked in sieve holes. this is a phenomenon that significantly decreases the screening process capacity. the screen blocking coefficient f is applied for a description of screen blocking. Blocking grains are the ones which is equal to or slightly larger than the sieve holes. Those grains do not pass through the sieve holes, remain over the sieve and may clog (block) the sieve holes, thus reducing the screen clearance coefficient. the tests were done using a laboratory vibrator and control sieves, by subsequently screening mixtures of particulate materials with a different content of blocking grains and different percentage share of the upperand lower-size fractions. Particulate materials of three model grain shapes were used for the tests: spherical, sharp-edged and irregular. The paper also includes a statistical analysis of the results obtained through experiments and an innovative method for describing sieve holes blocking. the new blocking coefficient specifies the percentage number of blocked sieve holes in relation to the total number of sieve holes. grain size is a parameter that determines the value of the screen blocking coefficient in time. an increase in the content of blocking grains in the mixtures results in an increase in the percentage number of blocked sieve holes. the content of individual fractions in the mixture also has a significant impact on the course of sieve holes blocking. screening is a very common industrial practice, and various designs of screens and types of sieves are available. that is why the subject of this paper is so important.
{"title":"The phenomenon of screen blocking for mixtures of varying blocking grain content","authors":"K. Ławińska, W. Serweta, R. Modrzewski","doi":"10.24425/118638","DOIUrl":"https://doi.org/10.24425/118638","url":null,"abstract":"Article is devoted to sieve holes blocking and describes the impact of the content of blocking grains in the feed on this phenomenon. The process of screen blocking involves grains of varying size being blocked in sieve holes. this is a phenomenon that significantly decreases the screening process capacity. the screen blocking coefficient f is applied for a description of screen blocking. Blocking grains are the ones which is equal to or slightly larger than the sieve holes. Those grains do not pass through the sieve holes, remain over the sieve and may clog (block) the sieve holes, thus reducing the screen clearance coefficient. the tests were done using a laboratory vibrator and control sieves, by subsequently screening mixtures of particulate materials with a different content of blocking grains and different percentage share of the upperand lower-size fractions. Particulate materials of three model grain shapes were used for the tests: spherical, sharp-edged and irregular. The paper also includes a statistical analysis of the results obtained through experiments and an innovative method for describing sieve holes blocking. the new blocking coefficient specifies the percentage number of blocked sieve holes in relation to the total number of sieve holes. grain size is a parameter that determines the value of the screen blocking coefficient in time. an increase in the content of blocking grains in the mixtures results in an increase in the percentage number of blocked sieve holes. the content of individual fractions in the mixture also has a significant impact on the course of sieve holes blocking. screening is a very common industrial practice, and various designs of screens and types of sieves are available. that is why the subject of this paper is so important.","PeriodicalId":50416,"journal":{"name":"Gospodarka Surowcami Mineralnymi-Mineral Resources Management","volume":"27 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2023-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86449247","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-07-20DOI: 10.24425/gsm.2019.128536
{"title":"Mineral and chemical characteristics of metallic precipitates in selected types of steel slags, blast furnace slags and waste arising from the production of cast iron","authors":"","doi":"10.24425/gsm.2019.128536","DOIUrl":"https://doi.org/10.24425/gsm.2019.128536","url":null,"abstract":"","PeriodicalId":50416,"journal":{"name":"Gospodarka Surowcami Mineralnymi-Mineral Resources Management","volume":"59 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2023-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86883017","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-07-20DOI: 10.24425/gsm.2022.140608
{"title":"On the criticality of minerals otherwise. New approach taking into account cultural, social and historical factors","authors":"","doi":"10.24425/gsm.2022.140608","DOIUrl":"https://doi.org/10.24425/gsm.2022.140608","url":null,"abstract":"","PeriodicalId":50416,"journal":{"name":"Gospodarka Surowcami Mineralnymi-Mineral Resources Management","volume":"58 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2023-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89930731","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In the event of occupational accidents in mining, investors can calculate approximately how much loss will be incurred at the time of the accident. However, in halting mining as a result of occupational accidents or legislation, investors, will perhaps not care about how much of a loss to profits will arise due to the resulting downtime of mining operations. The reason for this is that there is no such halting in mining operation as yet and mining activity is continued. Avoiding halting mines due to occupational accidents and legislation would enable the prevention of unexpected costs resulting from these time losses. The aim of this study was to find out how much the loss of profits resulting from the downtime of mining enterprises due to the aforementioned reasons are in total, and how much the ratio of loss of profits to annual operating costs is on average on an annual basis. To determine the loss of profits and to minimize the accidents in enterprises, permanent supervisors, who are assigned in the enterprises where they are working, were given a survey through the SurveyMonkey program. Of the 235 permanent supervisors who filled out the survey on behalf of the mining enterprises, 58 answered all of the multiple-choice questions examined in the study. These questions were analyzed together according to different mineral groups and differences in mining operation methods. As a result of the analysis, it was determined that the annual loss of profits of mining enterprises resulting from the aforementioned periods of downtime, and the ratio of these values to the annual operating costs constitute a rather significant share. The aim of the article was to raise awareness to have mining companies appropriate more funds for occupational health and safety. StrAty zySków POwStAłe w wynIku zAtrzyMAnIA PrACy GórnICzej wynIkAjąCe z wyPADków Przy PrACy Lub z PrzyCzyn wynIkAjąCyCH z PrzePISów PrAwnyCH S ł o w a k l u c z o w e bezpieczeństwo i higiena pracy, koszty operacyjne, wypadek przy pracy, zysk z działalności operacyjnej, bezpieczeństwo S t r e s z c z e n i e W przypadku wypadku przy pracy w górnictwie inwestorzy górniczy mogą obliczyć, jaką w przybliżeniu poniosą stratę. Jednak w przypadku wstrzymania wydobycia wynikającego z wypadków przy pracy lub ustawodawstwa, inwestorzy być może nie będą dbać o to, jak bardzo wzrośnie strata zysku z powodu strat nieprzepracowanego czasu w górnictwie. Powodem jest to, że nie ma jeszcze 176 Yıldız 2021 / Gospodarka Surowcami Mineralnymi – Mineral Resources Management 37(4), 153–176 obowiązkowego wstrzymania w działalności wydobywczej i w takim przypadku kontynuuje się działalność górniczą. Unikanie zatrzymywania kopalń z powodu wypadków przy pracy i przepisów pozwoli zapobiec nieoczekiwanym kosztom wynikającym z tych strat czasu. W publikacji postawiono sobie za cel ustalenie, na ile łącznie składają się straty zysku wynikające z nieprzepracowanych okresów działalności operacyjnej przedsiębiorstw górniczych ws
在矿业发生职业事故时,投资者可以大致计算出事故发生时将造成多少损失。然而,在由于职业事故或立法而停止采矿时,投资者也许不会关心由于采矿业务的停止而造成的利润损失有多大。其原因是,采矿作业尚未停止,采矿活动仍在继续。避免因职业事故和立法而停止采矿将能够防止由于这些时间损失而造成的意外费用。本研究的目的是了解由于上述原因造成的矿山企业停工造成的利润损失总计有多少,利润损失占年运营成本的平均比例是多少。为了确定利润的损失,并尽量减少企业中的事故,通过SurveyMonkey程序对被分配到他们工作的企业的永久性主管进行了调查。在代表矿业企业填写调查问卷的235名长期主管中,58人回答了研究中所有的多项选择题。根据不同的矿物类群和采矿作业方法的差异,对这些问题进行了综合分析。经过分析,确定采矿企业每年因上述停运期而损失的利润,这些价值与年度业务费用的比例相当大。这篇文章的目的是提高认识,使矿业公司为职业健康和安全拨出更多的资金。StrAty zySkow POwStAłe w wynIku zAtrzyMAnIA一家GornICzej wynIkAjąCe z wyPADkow Przy一家滑z PrzyCzyn wynIkAją进入z PrzePISow PrAwnyCH年代ło w z k l u c o w e bezpieczeństwo我higiena一家,koszty operacyjne, wypadek Przy一家,zysk z dział阿诺ści operacyjnej bezpieczeństwo S t r e S z z e n c e w przypadku wypadku Przy一家w gornictwie inwestorzy gorniczy mogąobliczyć,木菠萝ąw przybliż来自poniosąstratę。Jednak w przypadku wstrzymania wydobycia wynikającego z wypadków przy pracy club ustawodawstwa, inwestorzy byki może nie będą dbaki o to, jak bardzo wzrośnie strata zysku z powodu strat nieprzepracowanego czasu w górnictwie。矿业学,że nie ma jescze 176 Yıldız 2021 / Gospodarka Surowcami Mineralnymi - Mineral Resources Management, 37(4), 153-176 obowiązkowego wstrzymania w działalności wydobywczej i wtakim przypadku kontynuuje siji działalność górniczą。Unikanie zatrzymywania kopalkiz powodu wypadków przy pracy i przepisów pozwoli zapobiec nieoczekiwanym kosztom wynikającym z tych strasu。W publikacji poststawiono sobie za cel ustalenie, na ile łącznie składają siozy strategy zysku wynikające z nieprzepracowanych okresów działalności operacyjnej przedsiębiorstw górniczych wstrzymanych z tych przyzyn i ile wynosi średnioroczny stosunek strat zysku do rocznych kosztów eksploatacji。Aby określić the strategy w zysku i zminimalizowaki wypadki w przedsiębiorstwach, przeprowadzono ankietzuw ramach programu“SurveyMonkey”wśród osób stałego nadzoru pracującego tych w przedsiębiorstwach。Spośród 235 stałych nadzorców, którzy wypełniali ankietkie w imieniu przedsiębiorstw górniczych, 58 odpowiedziało na wszystkie zadane w badaniu pytania wielokrotnego wyboru。Pytania the analizowano łącznie według różnych group surowców mineralnych i różnic w metodach eksploatacji górnictwa。wwyniku przeprowadzonej analysis ustalono, że roczne strategy zysku przedsiębiorstw górniczych wynikające z postojów oraz stosunek tych wartości do rocznych kosztów eksploatacji stanowize średnio znaczący udziazov。Tym samym w artykule podjęto próbę uświadomienia, że firm górnicze przeznaczajowięcej środków na bezpieczeństwo i higienopracy。
{"title":"Loss of profits occurring due to the halting of mining operations arising from occupational accidents or reasons related to legislation","authors":"Taşkın Yıldız","doi":"10.24425/gsm.2021.139739","DOIUrl":"https://doi.org/10.24425/gsm.2021.139739","url":null,"abstract":"In the event of occupational accidents in mining, investors can calculate approximately how much loss will be incurred at the time of the accident. However, in halting mining as a result of occupational accidents or legislation, investors, will perhaps not care about how much of a loss to profits will arise due to the resulting downtime of mining operations. The reason for this is that there is no such halting in mining operation as yet and mining activity is continued. Avoiding halting mines due to occupational accidents and legislation would enable the prevention of unexpected costs resulting from these time losses. The aim of this study was to find out how much the loss of profits resulting from the downtime of mining enterprises due to the aforementioned reasons are in total, and how much the ratio of loss of profits to annual operating costs is on average on an annual basis. To determine the loss of profits and to minimize the accidents in enterprises, permanent supervisors, who are assigned in the enterprises where they are working, were given a survey through the SurveyMonkey program. Of the 235 permanent supervisors who filled out the survey on behalf of the mining enterprises, 58 answered all of the multiple-choice questions examined in the study. These questions were analyzed together according to different mineral groups and differences in mining operation methods. As a result of the analysis, it was determined that the annual loss of profits of mining enterprises resulting from the aforementioned periods of downtime, and the ratio of these values to the annual operating costs constitute a rather significant share. The aim of the article was to raise awareness to have mining companies appropriate more funds for occupational health and safety. StrAty zySków POwStAłe w wynIku zAtrzyMAnIA PrACy GórnICzej wynIkAjąCe z wyPADków Przy PrACy Lub z PrzyCzyn wynIkAjąCyCH z PrzePISów PrAwnyCH S ł o w a k l u c z o w e bezpieczeństwo i higiena pracy, koszty operacyjne, wypadek przy pracy, zysk z działalności operacyjnej, bezpieczeństwo S t r e s z c z e n i e W przypadku wypadku przy pracy w górnictwie inwestorzy górniczy mogą obliczyć, jaką w przybliżeniu poniosą stratę. Jednak w przypadku wstrzymania wydobycia wynikającego z wypadków przy pracy lub ustawodawstwa, inwestorzy być może nie będą dbać o to, jak bardzo wzrośnie strata zysku z powodu strat nieprzepracowanego czasu w górnictwie. Powodem jest to, że nie ma jeszcze 176 Yıldız 2021 / Gospodarka Surowcami Mineralnymi – Mineral Resources Management 37(4), 153–176 obowiązkowego wstrzymania w działalności wydobywczej i w takim przypadku kontynuuje się działalność górniczą. Unikanie zatrzymywania kopalń z powodu wypadków przy pracy i przepisów pozwoli zapobiec nieoczekiwanym kosztom wynikającym z tych strat czasu. W publikacji postawiono sobie za cel ustalenie, na ile łącznie składają się straty zysku wynikające z nieprzepracowanych okresów działalności operacyjnej przedsiębiorstw górniczych ws","PeriodicalId":50416,"journal":{"name":"Gospodarka Surowcami Mineralnymi-Mineral Resources Management","volume":"1 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2023-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86785096","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Native sulphur deposits mined using the underground melting method are characterized by a complex structure, which is the result of the many geologic processes which led to their formation. The resource utilization rate and the consumption of hot water per ton of sulphur are the main criteria of mining effectiveness. They depend on the porosity and permeability of the rocks forming the deposit, the content and mode of occurrence of sulphur (ore texture), and the distribution of rocks with these varying features. Good recognition of geological and hydrogeological deposit features, exploitation results, is important for formulating the rules of controlling the course of exploitation in 77 Sermet et al. 2021 / Gospodarka Surowcami Mineralnymi – Mineral Resources Management 37(4), 55–78 order to achieve the best recovery of sulphur with the lowest possible water consumption and to reduce operating costs. Sulphur deposits are characterized by great local and directional variations in their structure and hydrogeological parameters. This makes the melting process irregular. The flow of hot water and melted sulphur is facilitated in certain directions. As a result, the shape, and distribution and form of exploited parts of the deposit are highly variable. Full information about the deposit is necessary for the proper understanding and prediction of processes that occur in the deposit during sulphur melting, for forecasting its effects, and for controlling the exploitation process. This information is obtained through the lithological description of core samples from exploratory and exploitation boreholes, geophysical borehole logging, and surface seismic surveys. GeoloGiczne uwarunkowania ekSploatacji Siarki metoDą poDziemneGo wytapiania s ł o w a k l u c z o w e eksploatacja otworowa, złoże siarki, warunki geologiczno-górnicze eksploatacji S t r e s z c z e n i e Polskie złoża siarki rodzimej obecnie eksploatowane są metodą podziemnego wytapiania. Charakteryzują się dość skomplikowaną budową wewnętrzną, będącą wynikiem formujących je procesów geologicznych. Przy stosowaniu metody podziemnego wytapiania szczególnie ważne jest jak najbardziej szczegółowe rozpoznanie cech geologicznych i hydrogeologicznych złoża, mających istotny wpływ na wyniki prowadzonej eksploatacji. znajomość tych cech jest ważna dla sformułowania zasad kontroli przebiegu eksploatacji, w celu uzyskania jak najlepszego odzysku siarki przy jak najmniejszym zużyciu wody oraz dla obniżenia kosztów prowadzonej eksploatacji. wskaźnik wykorzystania zasobów i zużycie gorącej wody na tonę siarki to główne kryteria efektywności wydobycia. zależą one od następujących cech wykształcenia serii złożowej: porowatości i przepuszczalności skał tworzących złoże, zawartości, rodzaju i sposobu występowania siarki oraz od rozmieszczenia w przestrzeni złoża skał o zróżnicowanych tych cechach. złoża siarki rodzimej charakteryzują się dużą lokalną i kierunkową zmiennością budowy wewnętrznej oraz parametrów h
利用地下熔炼法开采的天然硫磺矿床具有复杂的结构,这是导致其形成的许多地质作用的结果。资源利用率和吨硫热水耗量是衡量开采效果的主要指标。它们取决于形成矿床的岩石的孔隙度和渗透性,硫的含量和赋存方式(矿石结构),以及具有这些不同特征的岩石的分布。在77 Sermet et al. 2021 / Gospodarka Surowcami Mineralnymi - Mineral Resources Management 37(4), 55-78中,对地质和水文地质矿床特征、开采结果的良好认识对于制定控制开采过程的规则至关重要,以便以尽可能低的用水量实现硫的最佳回收率,并降低运营成本。硫矿床的构造和水文地质参数具有很大的局部和方向性变化。这使得熔化过程不规则。热水和熔化的硫磺在某些方向上易于流动。因此,矿床被开采部分的形状、分布和形态变化很大。对于正确理解和预测硫熔化过程中发生的过程、预测其影响和控制开采过程,有关矿床的充分资料是必要的。这些信息是通过勘探和开发钻孔岩心样品的岩性描述、地球物理钻孔测井和地面地震调查获得的。GeoloGiczne uwarunkowania ekSploatacji Siarki metododogo wytapiania是一种非常复杂的地质结构,它是一种非常复杂的地质结构,是一种非常复杂的地质结构,是一种非常复杂的地质结构。charakteryzujosiodość skomplikowanobudowowewnętrzną, będącą wynikiem formujących je procesów geoicznych。Przy stosowaniu method podziemnego wytapiania szczególnie ważne jest jak najbardziej szczegółowe rozpoznanie ech geologicznych hydroologicznych złoża, mających istotny wpływ na wyniki proadzonej eksploatacji。Znajomość tych ech jest ważna dla sformułowania zasad controlli przebiegu eksploatacji, w celu uzyskania jak najlepszego odzysku siarki przy jak najmniejszym zużyciu wody oraz dla obniżenia kosztów proadzonej eksploatacji。Wskaźnik wykorzystania zasobów I zużycie gorącej wody na tonosiarki到główne kryteria efektywności wydobycia。来自海洋的żą一od następują进入切赫wykształcenia serii złożowej: porowatości我przepuszczalności平方公里列阵łtworzą进入złoże, zawartości, rodzaju我sposobu występowania siarki oraz od rozmieszczenia w przestrzeni złoż平方公里列阵ło zrożnicowanych tych cechach。Złoża siarki rodzimej charakteryzujosiodużą lokalnoi kierunkowe zmiennością budowy wewnętrznej oraz parametrów水文地质。Sprawia to, że处理topienia jest niererny,到znaczy ułatwiony jest przepływ gorącej wody I stopionej siarki w określonych, upzywilejowanch kierunkach。W efekcie, kształt I rozmieszczenie oraz forma eksploatowanych części złoża szobardzo zmienne。Pełna informacja o złożu jest niezbędna do prawidłowego zrozumienia i przewidywania procesów zachodzących w złożu w czasie prowadzenia podziemnego wytapiania siarki, prognozowania jego skutków oraz sterowania przebiegiem eksploatacji。Uzyskuje siojena podstawie opisu litologicznego próbek rdzeniowych z odwiertów, geoofizycznej rejestracji w otworach wiertniczych oraz powererzchniovych badajssmicznych。
{"title":"Geological conditions of borehole sulphur mining using the underground smelting method","authors":"E. Sermet, E. Sermet, M. Nieć, PrzeMysław Bokwa","doi":"10.24425/gsm.2021.139740","DOIUrl":"https://doi.org/10.24425/gsm.2021.139740","url":null,"abstract":"Native sulphur deposits mined using the underground melting method are characterized by a complex structure, which is the result of the many geologic processes which led to their formation. The resource utilization rate and the consumption of hot water per ton of sulphur are the main criteria of mining effectiveness. They depend on the porosity and permeability of the rocks forming the deposit, the content and mode of occurrence of sulphur (ore texture), and the distribution of rocks with these varying features. Good recognition of geological and hydrogeological deposit features, exploitation results, is important for formulating the rules of controlling the course of exploitation in 77 Sermet et al. 2021 / Gospodarka Surowcami Mineralnymi – Mineral Resources Management 37(4), 55–78 order to achieve the best recovery of sulphur with the lowest possible water consumption and to reduce operating costs. Sulphur deposits are characterized by great local and directional variations in their structure and hydrogeological parameters. This makes the melting process irregular. The flow of hot water and melted sulphur is facilitated in certain directions. As a result, the shape, and distribution and form of exploited parts of the deposit are highly variable. Full information about the deposit is necessary for the proper understanding and prediction of processes that occur in the deposit during sulphur melting, for forecasting its effects, and for controlling the exploitation process. This information is obtained through the lithological description of core samples from exploratory and exploitation boreholes, geophysical borehole logging, and surface seismic surveys. GeoloGiczne uwarunkowania ekSploatacji Siarki metoDą poDziemneGo wytapiania s ł o w a k l u c z o w e eksploatacja otworowa, złoże siarki, warunki geologiczno-górnicze eksploatacji S t r e s z c z e n i e Polskie złoża siarki rodzimej obecnie eksploatowane są metodą podziemnego wytapiania. Charakteryzują się dość skomplikowaną budową wewnętrzną, będącą wynikiem formujących je procesów geologicznych. Przy stosowaniu metody podziemnego wytapiania szczególnie ważne jest jak najbardziej szczegółowe rozpoznanie cech geologicznych i hydrogeologicznych złoża, mających istotny wpływ na wyniki prowadzonej eksploatacji. znajomość tych cech jest ważna dla sformułowania zasad kontroli przebiegu eksploatacji, w celu uzyskania jak najlepszego odzysku siarki przy jak najmniejszym zużyciu wody oraz dla obniżenia kosztów prowadzonej eksploatacji. wskaźnik wykorzystania zasobów i zużycie gorącej wody na tonę siarki to główne kryteria efektywności wydobycia. zależą one od następujących cech wykształcenia serii złożowej: porowatości i przepuszczalności skał tworzących złoże, zawartości, rodzaju i sposobu występowania siarki oraz od rozmieszczenia w przestrzeni złoża skał o zróżnicowanych tych cechach. złoża siarki rodzimej charakteryzują się dużą lokalną i kierunkową zmiennością budowy wewnętrznej oraz parametrów h","PeriodicalId":50416,"journal":{"name":"Gospodarka Surowcami Mineralnymi-Mineral Resources Management","volume":"16 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2023-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88774714","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-07-20DOI: 10.24425/gsm.2021.139745
{"title":"Polymorphic transformations of dicalcium silicates in steel slags used in the production of road aggregates","authors":"","doi":"10.24425/gsm.2021.139745","DOIUrl":"https://doi.org/10.24425/gsm.2021.139745","url":null,"abstract":"","PeriodicalId":50416,"journal":{"name":"Gospodarka Surowcami Mineralnymi-Mineral Resources Management","volume":"29 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2023-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85191333","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
various depths of the deposit as they considerably differ in their contents of smectite and other minerals. The samples were either modified with soda or activated with sulphuric (VI) acid and used to prepare their water suspensions with various contents of solids. The suspensions were subject to determinations of viscosity and flow curves.
{"title":"An impact of modifications an Dylągówka clay on the rheological properties of its water suspensions","authors":"Wojciech Panna, J. Mastalska, SebASTIAn PReWenDOWSKI","doi":"10.24425/gsm.2022.140610","DOIUrl":"https://doi.org/10.24425/gsm.2022.140610","url":null,"abstract":"various depths of the deposit as they considerably differ in their contents of smectite and other minerals. The samples were either modified with soda or activated with sulphuric (VI) acid and used to prepare their water suspensions with various contents of solids. The suspensions were subject to determinations of viscosity and flow curves.","PeriodicalId":50416,"journal":{"name":"Gospodarka Surowcami Mineralnymi-Mineral Resources Management","volume":"7 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2023-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85687163","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}