Siqi Wang, Colin P. McCoy, Peifeng Li, Yining Li, Yinghan Zhao, Gavin P. Andrews, M. Wylie, Yi Ge
Antimicrobial resistance (AMR) presents an escalating global challenge as conventional antibiotic treatments become less effective. In response, photodynamic therapy (PDT) and photothermal therapy (PTT) have emerged as promising alternatives. While rooted in ancient practices, these methods have evolved with modern innovations, particularly through the integration of lasers, refining their efficacy. PDT harnesses photosensitizers to generate reactive oxygen species (ROS), which are detrimental to microbial cells, whereas PTT relies on heat to induce cellular damage. The key to their effectiveness lies in the utilization of photosensitizers, especially when integrated into nano- or micron-scale supports, which amplify ROS production and enhance antimicrobial activity. Over the last decade, carbon dots (CDs) have emerged as a highly promising nanomaterial, attracting increasing attention owing to their distinctive properties and versatile applications, including PDT and PTT. They can not only function as photosensitizers, but also synergistically combine with other photosensitizers to enhance overall efficacy. This review explores the recent advancements in CDs, underscoring their significance and potential in reshaping advanced antimicrobial therapeutics.
随着传统抗生素治疗的效果越来越差，抗菌素耐药性（AMR）已成为一项日益严峻的全球性挑战。为此，光动力疗法（PDT）和光热疗法（PTT）已成为前景广阔的替代疗法。虽然这些方法植根于古老的实践，但随着现代创新技术的发展，特别是通过激光的整合，它们的疗效得到了进一步完善。光化学疗法利用光敏剂产生对微生物细胞有害的活性氧（ROS），而 PTT 则依靠热量诱导细胞损伤。其有效性的关键在于对光敏剂的利用，尤其是将光敏剂整合到纳米或微米级的支撑物中时，光敏剂可放大 ROS 的产生并增强抗菌活性。在过去的十年中，碳点（CD）作为一种极具前景的纳米材料崭露头角，因其独特的性质和包括光致发射效应和光致诱导效应在内的多种应用而受到越来越多的关注。它们不仅能发挥光敏剂的作用，还能与其他光敏剂协同增效，提高整体疗效。本综述探讨了 CD 的最新进展，强调了它们在重塑先进抗微生物疗法方面的意义和潜力。
{"title":"Carbon Dots in Photodynamic/Photothermal Antimicrobial Therapy","authors":"Siqi Wang, Colin P. McCoy, Peifeng Li, Yining Li, Yinghan Zhao, Gavin P. Andrews, M. Wylie, Yi Ge","doi":"10.3390/nano14151250","DOIUrl":"https://doi.org/10.3390/nano14151250","url":null,"abstract":"Antimicrobial resistance (AMR) presents an escalating global challenge as conventional antibiotic treatments become less effective. In response, photodynamic therapy (PDT) and photothermal therapy (PTT) have emerged as promising alternatives. While rooted in ancient practices, these methods have evolved with modern innovations, particularly through the integration of lasers, refining their efficacy. PDT harnesses photosensitizers to generate reactive oxygen species (ROS), which are detrimental to microbial cells, whereas PTT relies on heat to induce cellular damage. The key to their effectiveness lies in the utilization of photosensitizers, especially when integrated into nano- or micron-scale supports, which amplify ROS production and enhance antimicrobial activity. Over the last decade, carbon dots (CDs) have emerged as a highly promising nanomaterial, attracting increasing attention owing to their distinctive properties and versatile applications, including PDT and PTT. They can not only function as photosensitizers, but also synergistically combine with other photosensitizers to enhance overall efficacy. This review explores the recent advancements in CDs, underscoring their significance and potential in reshaping advanced antimicrobial therapeutics.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"33 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141802421","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Yumei Gao, Hu Xiao, Mou-Hua Jiang, Feng Chi, Zilong Yi, Liming Liu
We study theoretically the Josephson diode effect (JDE) when realized in a system composed of parallel-coupled double-quantum dots (DQDs) sandwiched between two semiconductor nanowires deposited on an s-wave superconductor surface. Due to the combined effects of proximity-induced superconductivity, strong Rashba spin–orbit interaction, and the Zeeman splitting inside the nanowires, a pair of Majorana bound states (MBSs) may possibly emerge at opposite ends of each nanowire. Different phase factors arising from the superconductor substrate can be generated in the coupling amplitudes between the DQDs and MBSs prepared at the left and right nanowires, and this will result in the Josephson current. We find that the critical Josephson currents in positive and negative directions are different from each other in amplitude within an oscillation period with respect to the magnetic flux penetrating through the system, a phenomenon known as the JDE. It arises from the quantum interference effect in this double-path device, and it can hardly occur in the system of one QD coupled to MBSs. Our results also show that the diode efficiency can reach up to 50%, but this depends on the overlap amplitude between the MBSs, as well as the energy levels of the DQDs adjustable by gate voltages. The present model is realizable within current nanofabrication technologies and may find practical use in the interdisciplinary field of Majorana and Josephson physics.
{"title":"Josephson Diode Effect in Parallel-Coupled Double-Quantum Dots Connected to Unalike Majorana Nanowires","authors":"Yumei Gao, Hu Xiao, Mou-Hua Jiang, Feng Chi, Zilong Yi, Liming Liu","doi":"10.3390/nano14151251","DOIUrl":"https://doi.org/10.3390/nano14151251","url":null,"abstract":"We study theoretically the Josephson diode effect (JDE) when realized in a system composed of parallel-coupled double-quantum dots (DQDs) sandwiched between two semiconductor nanowires deposited on an s-wave superconductor surface. Due to the combined effects of proximity-induced superconductivity, strong Rashba spin–orbit interaction, and the Zeeman splitting inside the nanowires, a pair of Majorana bound states (MBSs) may possibly emerge at opposite ends of each nanowire. Different phase factors arising from the superconductor substrate can be generated in the coupling amplitudes between the DQDs and MBSs prepared at the left and right nanowires, and this will result in the Josephson current. We find that the critical Josephson currents in positive and negative directions are different from each other in amplitude within an oscillation period with respect to the magnetic flux penetrating through the system, a phenomenon known as the JDE. It arises from the quantum interference effect in this double-path device, and it can hardly occur in the system of one QD coupled to MBSs. Our results also show that the diode efficiency can reach up to 50%, but this depends on the overlap amplitude between the MBSs, as well as the energy levels of the DQDs adjustable by gate voltages. The present model is realizable within current nanofabrication technologies and may find practical use in the interdisciplinary field of Majorana and Josephson physics.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"53 39","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141804796","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Oxidized carbon nanohorn (CNHox) a carbon nanomaterial that has attracted attention due to its unique material properties. It is expected to be applied in various areas like cancer treatment, gene-expression technology, fluids with high thermal conductivity, lubricants, and so on. While the rheological measurements of suspensions provide information on the effective size and interactions of suspended particles, the rheological behaviors of aqueous suspensions of CNHox have never been systematically investigated. To clarify the rheological behaviors of aqueous suspensions of CNHox, their viscosity and dynamic viscoelasticity were measured with changing particle concentration and salt concentration. The viscosity of a CNHox suspension showed yield stress at low shear rates and showed shear-thinning behavior with increasing shear rates. The viscosity of 5 weight % CNHox suspensions was comparable to that of 60 weight % silica suspensions. This high viscosity at a low CNHox concentration is probably due to the porous structure and large effective volume of the CNHox particle. The estimated effective volume of CNHox calculated by the Krieger−Dougherty equation was 18.9 times larger than the actual volume calculated by the mass concentration and density. The dependence of rheological behavior of the CNHox suspension on salt concentration was weak compared to that of the colloidal silica suspension. This weak dependence on salt concentration may be due to the roughness of the particle surface, which would weaken the effect of electric double-layer interactions and/or van der Waals interactions between particles. These rheological behaviors of the aqueous suspension of CNHox shown in this research will be useful in efforts to improve the efficiency of its utilization for the various applications.
{"title":"Rheological Behavior of an Aqueous Suspension of Oxidized Carbon Nanohorn (CNHox)","authors":"Ayumi Moteki, Motoyoshi Kobayashi","doi":"10.3390/nano14151247","DOIUrl":"https://doi.org/10.3390/nano14151247","url":null,"abstract":"Oxidized carbon nanohorn (CNHox) a carbon nanomaterial that has attracted attention due to its unique material properties. It is expected to be applied in various areas like cancer treatment, gene-expression technology, fluids with high thermal conductivity, lubricants, and so on. While the rheological measurements of suspensions provide information on the effective size and interactions of suspended particles, the rheological behaviors of aqueous suspensions of CNHox have never been systematically investigated. To clarify the rheological behaviors of aqueous suspensions of CNHox, their viscosity and dynamic viscoelasticity were measured with changing particle concentration and salt concentration. The viscosity of a CNHox suspension showed yield stress at low shear rates and showed shear-thinning behavior with increasing shear rates. The viscosity of 5 weight % CNHox suspensions was comparable to that of 60 weight % silica suspensions. This high viscosity at a low CNHox concentration is probably due to the porous structure and large effective volume of the CNHox particle. The estimated effective volume of CNHox calculated by the Krieger−Dougherty equation was 18.9 times larger than the actual volume calculated by the mass concentration and density. The dependence of rheological behavior of the CNHox suspension on salt concentration was weak compared to that of the colloidal silica suspension. This weak dependence on salt concentration may be due to the roughness of the particle surface, which would weaken the effect of electric double-layer interactions and/or van der Waals interactions between particles. These rheological behaviors of the aqueous suspension of CNHox shown in this research will be useful in efforts to improve the efficiency of its utilization for the various applications.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"20 9","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141804095","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Xin Ding, Huan Lin, Jie Zhou, Zhihao Lin, Yanyan Huang, Ge Chen, Yanguo Zhang, Jun Lv, Jing Chen, Guangyang Liu, Xiaomin Xu, Donghui Xu
Reducing fruit and vegetable waste and maintaining quality has become challenging for everyone. Nanotechnology is a new and intriguing technology that is currently being implemented in fruit and vegetable preservation. Silver nanomaterials provide superior antibacterial qualities, biodegradability, and biocompatibility, which expands their potential applications in fruit and vegetable preservation. Silver nanomaterials include silver nanocomposites and Ag-MOF, of which silver nanocomposites are mainly composed of silver nanoparticles. Notably, not all kinds of silver nanoparticles utilized in the preservation of fruits and vegetables are thoroughly described. Therefore, the synthesis, mechanism of action, and advancements in research on silver nanocomposites for fruit and vegetable preservation were discussed in this study.
{"title":"Silver Nanocomposites with Enhanced Shelf-Life for Fruit and Vegetable Preservation: Mechanisms, Advances, and Prospects","authors":"Xin Ding, Huan Lin, Jie Zhou, Zhihao Lin, Yanyan Huang, Ge Chen, Yanguo Zhang, Jun Lv, Jing Chen, Guangyang Liu, Xiaomin Xu, Donghui Xu","doi":"10.3390/nano14151244","DOIUrl":"https://doi.org/10.3390/nano14151244","url":null,"abstract":"Reducing fruit and vegetable waste and maintaining quality has become challenging for everyone. Nanotechnology is a new and intriguing technology that is currently being implemented in fruit and vegetable preservation. Silver nanomaterials provide superior antibacterial qualities, biodegradability, and biocompatibility, which expands their potential applications in fruit and vegetable preservation. Silver nanomaterials include silver nanocomposites and Ag-MOF, of which silver nanocomposites are mainly composed of silver nanoparticles. Notably, not all kinds of silver nanoparticles utilized in the preservation of fruits and vegetables are thoroughly described. Therefore, the synthesis, mechanism of action, and advancements in research on silver nanocomposites for fruit and vegetable preservation were discussed in this study.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"61 11","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141808215","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Onkar Kulkarni, Alejandro Enríquez‐Cabrera, Xinyu Yang, Julie Foncy, L. Nicu, Gábor Molnár, L. Salmon
We used stereolithography to print polymer nanocomposite samples of stimuli-responsive spin crossover materials in the commercial photo-curable printing resins DS3000 and PEGDA-250. The thermomechanical analysis of the SLA-printed objects revealed not only the expected reinforcement of the polymer resins by the introduction of the stiffer SCO particles, but also a significant mechanical damping, as well as a sizeable linear strain around the spin transition temperatures. For the highest accessible loads (ca. 13–15 vol.%) we measured transformation strains in the range of 1.2–1.5%, giving rise to peaks in the coefficient of thermal expansion as high as 10−3 °C−1, which was exploited in 3D printed bilayer actuators to produce bending movement. The results pave the way for integrating these advanced stimuli-responsive composites into mechanical actuators and 4D printing applications.
{"title":"Stereolithography 3D Printing of Stimuli-Responsive Spin Crossover@Polymer Nanocomposites with Optimized Actuating Properties","authors":"Onkar Kulkarni, Alejandro Enríquez‐Cabrera, Xinyu Yang, Julie Foncy, L. Nicu, Gábor Molnár, L. Salmon","doi":"10.3390/nano14151243","DOIUrl":"https://doi.org/10.3390/nano14151243","url":null,"abstract":"We used stereolithography to print polymer nanocomposite samples of stimuli-responsive spin crossover materials in the commercial photo-curable printing resins DS3000 and PEGDA-250. The thermomechanical analysis of the SLA-printed objects revealed not only the expected reinforcement of the polymer resins by the introduction of the stiffer SCO particles, but also a significant mechanical damping, as well as a sizeable linear strain around the spin transition temperatures. For the highest accessible loads (ca. 13–15 vol.%) we measured transformation strains in the range of 1.2–1.5%, giving rise to peaks in the coefficient of thermal expansion as high as 10−3 °C−1, which was exploited in 3D printed bilayer actuators to produce bending movement. The results pave the way for integrating these advanced stimuli-responsive composites into mechanical actuators and 4D printing applications.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"33 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141808286","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Juvissan Aguedo, M. Vojs, Martin Vrška, Marek Nemcovic, Z. Pakanová, K. Dragounová, Oleksandr Romanyuk, Alexander Kromka, Marian Varga, Michal Hatala, M. Marton, J. Tkáč
We investigated the use of boron-doped diamond (BDD) with different surface morphologies for the enhanced detection of nine different peptides by matrix-assisted laser desorption/ionisation mass spectrometry (MALDI-MS). For the first time, we compared three different nanostructured BDD film morphologies (Continuous, Nanograss, and Nanotips) with differently terminated surfaces (-H, -O, and -F) to commercially available Ground Steel plates. All these surfaces were evaluated for their effectiveness in detecting the nine different peptides by MALDI-MS. Our results demonstrated that certain nanostructured BDD surfaces exhibited superior performance for the detection of especially hydrophobic peptides (e.g., bradykinin 1–7, substance P, and the renin substrate), with a limit of detection of down to 2.3 pM. Further investigation showed that hydrophobic peptides (e.g., bradykinin 1–7, substance P, and the renin substrate) were effectively detected on hydrogen-terminated BDD surfaces. On the other hand, the highly acidic negatively charged peptide adrenocorticotropic hormone fragment 18–39 was effectively identified on oxygen-/fluorine-terminated BDD surfaces. Furthermore, BDD surfaces reduced sodium adduct contamination significantly.
{"title":"What Are the Key Factors for the Detection of Peptides Using Mass Spectrometry on Boron-Doped Diamond Surfaces?","authors":"Juvissan Aguedo, M. Vojs, Martin Vrška, Marek Nemcovic, Z. Pakanová, K. Dragounová, Oleksandr Romanyuk, Alexander Kromka, Marian Varga, Michal Hatala, M. Marton, J. Tkáč","doi":"10.3390/nano14151241","DOIUrl":"https://doi.org/10.3390/nano14151241","url":null,"abstract":"We investigated the use of boron-doped diamond (BDD) with different surface morphologies for the enhanced detection of nine different peptides by matrix-assisted laser desorption/ionisation mass spectrometry (MALDI-MS). For the first time, we compared three different nanostructured BDD film morphologies (Continuous, Nanograss, and Nanotips) with differently terminated surfaces (-H, -O, and -F) to commercially available Ground Steel plates. All these surfaces were evaluated for their effectiveness in detecting the nine different peptides by MALDI-MS. Our results demonstrated that certain nanostructured BDD surfaces exhibited superior performance for the detection of especially hydrophobic peptides (e.g., bradykinin 1–7, substance P, and the renin substrate), with a limit of detection of down to 2.3 pM. Further investigation showed that hydrophobic peptides (e.g., bradykinin 1–7, substance P, and the renin substrate) were effectively detected on hydrogen-terminated BDD surfaces. On the other hand, the highly acidic negatively charged peptide adrenocorticotropic hormone fragment 18–39 was effectively identified on oxygen-/fluorine-terminated BDD surfaces. Furthermore, BDD surfaces reduced sodium adduct contamination significantly.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"19 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141808001","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The orderings of atoms in bimetallic 1.6–2.1 nm-large CuCo nanoparticles, important as catalytic and magnetic materials, were studied using a combination of DFT calculations with a topological approach. The structure and magnetism of Cu50Co151, Cu101Co100, Cu151Co50, and Cu303Co102 nanoparticles; their resistance to disintegrating into separate Cu and Co species; as well as the exposed surface sites, were quantified and analyzed, showing a clear preference for Cu atoms to occupy surface positions while the Co atoms tended to form a compact cluster in the interior of the nanoparticles. The surface segregation of Co atoms that are encapsulated by less-active Cu atoms, induced by the adsorption of CO molecules, was already enabled at a low coverage of adsorbed CO, providing the energy required to displace the entire compact Co species inside the Cu matrices due to a notable adsorption preference of CO for the Co sites over the Cu ones. The calculated adsorption energies and vibrational frequencies of adsorbed CO should be helpful indicators for experimentally monitoring the nature of the surface sites of CuCo nanoparticles, especially in the case of active Co surface sites emerging in the presence of CO.
采用 DFT 计算与拓扑方法相结合的方法，研究了作为重要催化和磁性材料的 1.6-2.1 nm 大的双金属铜钴纳米粒子中原子的有序性。对 Cu50Co151、Cu101Co100、Cu151Co50 和 Cu303Co102 纳米粒子的结构和磁性、它们分解成单独的 Cu 和 Co 物种的阻力以及暴露的表面位点进行了量化和分析，结果表明 Cu 原子明显倾向于占据表面位置，而 Co 原子则倾向于在纳米粒子内部形成一个紧密的簇。当吸附的 CO 覆盖率较低时，吸附在活性较低的 Cu 原子上的 Co 原子就会发生表面分离，由于 CO 对 Co 位点的吸附明显优于对 Cu 位点的吸附，因此提供了将整个紧密的 Co 物体置换到 Cu 基质内部所需的能量。计算得出的吸附 CO 的吸附能和振动频率应该是实验监测铜钴纳米粒子表面位点性质的有用指标，尤其是在 CO 存在时出现的活性 Co 表面位点的情况下。
{"title":"Chemical Orderings in CuCo Nanoparticles: Topological Modeling Using DFT Calculations","authors":"Konstantin M. Neyman, Pere Alemany","doi":"10.3390/nano14151242","DOIUrl":"https://doi.org/10.3390/nano14151242","url":null,"abstract":"The orderings of atoms in bimetallic 1.6–2.1 nm-large CuCo nanoparticles, important as catalytic and magnetic materials, were studied using a combination of DFT calculations with a topological approach. The structure and magnetism of Cu50Co151, Cu101Co100, Cu151Co50, and Cu303Co102 nanoparticles; their resistance to disintegrating into separate Cu and Co species; as well as the exposed surface sites, were quantified and analyzed, showing a clear preference for Cu atoms to occupy surface positions while the Co atoms tended to form a compact cluster in the interior of the nanoparticles. The surface segregation of Co atoms that are encapsulated by less-active Cu atoms, induced by the adsorption of CO molecules, was already enabled at a low coverage of adsorbed CO, providing the energy required to displace the entire compact Co species inside the Cu matrices due to a notable adsorption preference of CO for the Co sites over the Cu ones. The calculated adsorption energies and vibrational frequencies of adsorbed CO should be helpful indicators for experimentally monitoring the nature of the surface sites of CuCo nanoparticles, especially in the case of active Co surface sites emerging in the presence of CO.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"62 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141808431","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In view of their potential applicability in technology fields where magnets are required to operate at higher temperatures, the class of nanocomposite magnets with little or no rare earth (RE) content has been widely researched in the last two decades. Among these nanocomposite magnets, the subclass of magnetic binary systems exhibiting the formation of L10 tetragonal phases is the most illustrious. Some of the most interesting systems are represented by the Mn-based alloys, with addition of Al, Bi, Ga, Ge. Such alloys are interesting as they are less costly than RE magnets and they show promising magnetic properties. The paper tackles the case of MnGa binary alloys with various compositions around the Mn3Ga stoichiometry. Four MnGa magnetic alloys, with Mn content ranging from 70 at% to 75 at% were produced using rapid solidification to form the melt. By combining structural information arising from X-ray diffractometry and transmission electron microscopy with magnetic properties determined by vibrating sample magnetometry, we are able to document the nature and properties of the structural phases formed in the alloys in their as-cast state and upon annealing, the evolution of the phase structure after annealing and its influence on the magnetic behavior of the MnGa alloys. After annealing at 400 °C and 500 °C, MnGa alloys are showing a multiple-phase microstructure, consisting of co-existing crystallites of L10 and D022 tetragonal phase. As a consequence of these structurally and magnetically different phases, co-existing within the microstructure, promising magnetic features are obtained, with both coercive fields and saturation magnetization exceeding values previously reported for both alloys and layers of MnGa.
{"title":"High Magnetic Performance in MnGa Nanocomposite Magnets","authors":"Ovidiu Crisan, A. Crisan","doi":"10.3390/nano14151245","DOIUrl":"https://doi.org/10.3390/nano14151245","url":null,"abstract":"In view of their potential applicability in technology fields where magnets are required to operate at higher temperatures, the class of nanocomposite magnets with little or no rare earth (RE) content has been widely researched in the last two decades. Among these nanocomposite magnets, the subclass of magnetic binary systems exhibiting the formation of L10 tetragonal phases is the most illustrious. Some of the most interesting systems are represented by the Mn-based alloys, with addition of Al, Bi, Ga, Ge. Such alloys are interesting as they are less costly than RE magnets and they show promising magnetic properties. The paper tackles the case of MnGa binary alloys with various compositions around the Mn3Ga stoichiometry. Four MnGa magnetic alloys, with Mn content ranging from 70 at% to 75 at% were produced using rapid solidification to form the melt. By combining structural information arising from X-ray diffractometry and transmission electron microscopy with magnetic properties determined by vibrating sample magnetometry, we are able to document the nature and properties of the structural phases formed in the alloys in their as-cast state and upon annealing, the evolution of the phase structure after annealing and its influence on the magnetic behavior of the MnGa alloys. After annealing at 400 °C and 500 °C, MnGa alloys are showing a multiple-phase microstructure, consisting of co-existing crystallites of L10 and D022 tetragonal phase. As a consequence of these structurally and magnetically different phases, co-existing within the microstructure, promising magnetic features are obtained, with both coercive fields and saturation magnetization exceeding values previously reported for both alloys and layers of MnGa.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"65 20","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141806411","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Water pollution seriously affects the development of society and human life. There are various kinds of pollutants, including soluble pollutants and insoluble floaters on the water surface. Herein, the photocatalyst semiconductor BiOCl and superhydrophobic functional particles Mg(OH)2 were deposited on the surfaces of canvas and polyester felt to construct superhydrophobic canvas and polyester felt. The contact angles of the synthetic superhydrophobic canvas and polyester felt were measured as 152° and 155.3°, respectively. The selective adsorption of hexadecane was achieved using the wetting difference between the surface of water and pollutants floating on the surface. For dissolved pollutants, the surface wettability needed to be changed with the help of ethanol. The degradation efficiencies were all greater than 90%, demonstrating the versatility of the synthetic superhydrophobic canvas and polyester felt.
{"title":"Fabrication of Non-Wetting Mg(OH)2 Composites with Photoresponsive Capabilities and Their Environmental Restoration Performance","authors":"Dongmei Zhang, Jiaqi Zhao, Yangyang Peng, Yuchao Li, Wenbin Guo, Chengzhu Liao","doi":"10.3390/nano14151240","DOIUrl":"https://doi.org/10.3390/nano14151240","url":null,"abstract":"Water pollution seriously affects the development of society and human life. There are various kinds of pollutants, including soluble pollutants and insoluble floaters on the water surface. Herein, the photocatalyst semiconductor BiOCl and superhydrophobic functional particles Mg(OH)2 were deposited on the surfaces of canvas and polyester felt to construct superhydrophobic canvas and polyester felt. The contact angles of the synthetic superhydrophobic canvas and polyester felt were measured as 152° and 155.3°, respectively. The selective adsorption of hexadecane was achieved using the wetting difference between the surface of water and pollutants floating on the surface. For dissolved pollutants, the surface wettability needed to be changed with the help of ethanol. The degradation efficiencies were all greater than 90%, demonstrating the versatility of the synthetic superhydrophobic canvas and polyester felt.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"26 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141807778","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In this paper, we present the structural, mechanical and electrical properties of composite cement materials that can be widely used as substituent for cement. We start with the characterization of a composite cement sample using an analysis of X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) spectra. The measurements of the Vickers hardness, cyclic and sweep linear voltammetry and electrochemical impedance spectroscopy (EIS) of composite cement materials were also recorded. This study compared the effect of the different nanocomposites added to cement on the mitigation of the alkali–silica reaction, which is responsible for the swelling, cracking and deleterious behavior of the material. The enhancement in Vickers hardness was more pronounced for composite cement materials. In contrast, the values of Vickers hardness decreased for the composite cement containing mortar and the control sample, suggesting that the long-term performance of cement was compromised. In order to obtain information about the bulk resistance of the composite cement material, electrochemical impedance spectroscopy (EIS) data were employed. The results suggest that for composite cement materials, there is an improvement in bulk electrical resistance, which can be attributed to the lower amounts of cracks and swelling due to lower expansion. In the control sample, a reduction in the bulk resistance suggests the formation of microcracks, which cause the aging and degradation of the material. The intersection of arcs in the EIS spectrum of the mixed composite cement sample gradually increased by an alkaline exposure of up to 21 days and finally shifted towards a low value of high frequency with an increase in alkaline exposure of up to 28 days.
本文介绍了可广泛用作水泥替代品的复合水泥材料的结构、机械和电气性能。我们首先利用 X 射线衍射 (XRD) 和核磁共振 (NMR) 光谱分析了复合水泥样品的特性。此外，还记录了复合水泥材料的维氏硬度、循环和扫频线性伏安法以及电化学阻抗谱（EIS）的测量结果。这项研究比较了添加到水泥中的不同纳米复合材料对缓解碱-二氧化硅反应的影响，碱-二氧化硅反应是造成材料膨胀、开裂和有害行为的原因。复合水泥材料的维氏硬度提高更为明显。相反，含有灰浆的复合水泥和对照样本的维氏硬度值则有所下降，这表明水泥的长期性能受到了影响。为了获得复合水泥材料的体积电阻信息，采用了电化学阻抗谱（EIS）数据。结果表明，复合水泥材料的体积电阻有所改善，这可归因于较低的膨胀导致裂缝和膨胀量减少。在对照样品中，体积电阻的降低表明微裂纹的形成，而微裂纹会导致材料的老化和降解。混合复合水泥样品的 EIS 频谱中的电弧交点在碱性暴露达 21 天后逐渐增加，最后随着碱性暴露达 28 天的增加而转向高频率的低值。
{"title":"Circular Economy of Construction and Demolition Waste for Nanocomposite Cement: XRD, NMR, Vickers, Voltammetric and EIS Characterization","authors":"Roxana Rada, D. Manea, Simona Rada, R. Fechete","doi":"10.3390/nano14151239","DOIUrl":"https://doi.org/10.3390/nano14151239","url":null,"abstract":"In this paper, we present the structural, mechanical and electrical properties of composite cement materials that can be widely used as substituent for cement. We start with the characterization of a composite cement sample using an analysis of X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) spectra. The measurements of the Vickers hardness, cyclic and sweep linear voltammetry and electrochemical impedance spectroscopy (EIS) of composite cement materials were also recorded. This study compared the effect of the different nanocomposites added to cement on the mitigation of the alkali–silica reaction, which is responsible for the swelling, cracking and deleterious behavior of the material. The enhancement in Vickers hardness was more pronounced for composite cement materials. In contrast, the values of Vickers hardness decreased for the composite cement containing mortar and the control sample, suggesting that the long-term performance of cement was compromised. In order to obtain information about the bulk resistance of the composite cement material, electrochemical impedance spectroscopy (EIS) data were employed. The results suggest that for composite cement materials, there is an improvement in bulk electrical resistance, which can be attributed to the lower amounts of cracks and swelling due to lower expansion. In the control sample, a reduction in the bulk resistance suggests the formation of microcracks, which cause the aging and degradation of the material. The intersection of arcs in the EIS spectrum of the mixed composite cement sample gradually increased by an alkaline exposure of up to 21 days and finally shifted towards a low value of high frequency with an increase in alkaline exposure of up to 28 days.","PeriodicalId":508599,"journal":{"name":"Nanomaterials","volume":"37 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141813127","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：