Cristina Chacón Bonet, Hector Cifuentes Bulte, Yolanda Luna-Galiano, Jose David Rios, Pilar Ariza, Carlos Leiva Carlos
In this study is explored the use of construction and demolition waste as fine aggregate in mortars. The addition of nano-graphene oxide (0.1%wt) has also been evaluated. Tests were conducted to determine their density, humidity content, water absorption capacity and open void porosity (using water absorption) and the micro and nano-porosity using Hg intrusion and N2 absorption techniques, as well as their flexural and compressive strength and resistance to acid attacks. The mechanical properties of mortars manufactured with standard sand were better (30%) than made with waste aggregate. Mortars with both aggregates can be classified as M20. Nano-Graphene oxide acts as a filler, reducing the volume of macro and micro pores, thereby increasing the mechanical performance, especially when recycled aggregates are used (30% the flexural strength for recycled aggregates and 4% for standard sand). The addition of nano-graphene oxide reduces the transmission channels of acid within mortar.
{"title":"Exploring the impact of graphene oxide on mechanical and durability properties of mortars incorporating demolition waste: micro and nano-pore structure effects","authors":"Cristina Chacón Bonet, Hector Cifuentes Bulte, Yolanda Luna-Galiano, Jose David Rios, Pilar Ariza, Carlos Leiva Carlos","doi":"10.3989/mc.2023.351623","DOIUrl":"https://doi.org/10.3989/mc.2023.351623","url":null,"abstract":"In this study is explored the use of construction and demolition waste as fine aggregate in mortars. The addition of nano-graphene oxide (0.1%wt) has also been evaluated. Tests were conducted to determine their density, humidity content, water absorption capacity and open void porosity (using water absorption) and the micro and nano-porosity using Hg intrusion and N2 absorption techniques, as well as their flexural and compressive strength and resistance to acid attacks. The mechanical properties of mortars manufactured with standard sand were better (30%) than made with waste aggregate. Mortars with both aggregates can be classified as M20. Nano-Graphene oxide acts as a filler, reducing the volume of macro and micro pores, thereby increasing the mechanical performance, especially when recycled aggregates are used (30% the flexural strength for recycled aggregates and 4% for standard sand). The addition of nano-graphene oxide reduces the transmission channels of acid within mortar.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":"9 27","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135390122","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Limestone Calcined Clay Cement (LC3) Technology is a low carbon cement that combines limestone, calcined clay, and clinker, aiming to reduce CO2 emissions by 40%-50% during production. In this study, large-scale investigations were conducted to explore LC3 as a potential substitute for conventional cement (CC). Mechanical and durability tests were performed on LC3, comparing results with CC and Pozzolana Cement (PC) concretes. The findings revealed that LC3 concrete exhibited promising early-stage strength similar to CC concrete. However, at 90 days, LC3 showcased a 10% higher strength compared to CC concrete. Additionally, LC3 displayed a remarkable 45% increase in resistance to moisture ingress, indicating improved durability over CC concrete. These results highlight the efficacy of low carbon cement in developing ternary blended cements that offer early strength and enhanced durability, making it a viable eco-friendly alternative in the construction industry.
{"title":"A low carbon cement (LC3) as a sustainable material in high strength concrete: green concrete","authors":"Bhavani Sirangi, M.L.V. Prasad","doi":"10.3989/mc.2023.355123","DOIUrl":"https://doi.org/10.3989/mc.2023.355123","url":null,"abstract":"Limestone Calcined Clay Cement (LC3) Technology is a low carbon cement that combines limestone, calcined clay, and clinker, aiming to reduce CO2 emissions by 40%-50% during production. In this study, large-scale investigations were conducted to explore LC3 as a potential substitute for conventional cement (CC). Mechanical and durability tests were performed on LC3, comparing results with CC and Pozzolana Cement (PC) concretes. The findings revealed that LC3 concrete exhibited promising early-stage strength similar to CC concrete. However, at 90 days, LC3 showcased a 10% higher strength compared to CC concrete. Additionally, LC3 displayed a remarkable 45% increase in resistance to moisture ingress, indicating improved durability over CC concrete. These results highlight the efficacy of low carbon cement in developing ternary blended cements that offer early strength and enhanced durability, making it a viable eco-friendly alternative in the construction industry.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":"44 15","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-11-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135819580","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Joaquin Humberto Aquino Rocha, Matheus Pimentel Tinoco, Romildo Dias Toledo Filho
This study aims to evaluate the effect of RCP from a precast concrete plant on rheological and mechanical properties of cementitious pastes. In the study, Portland cement was replaced by RCP in 10, 20, and 30% (in mass). The hydration kinects of cement with RCP was studied through isothermal calorimetry. The fresh properties were assessed using mini-slump test and rotational rheometry. The mechanical properties were evaluated through compression tests and the microstruture was studied using Scanning Electron Microscopy. RCP reduces fluidity of the pastes, by increasing both yield stress and plastic viscosity. The addition of RCP accelerates the hydration of cement, while reducing the released heat. RCP also reduces the compressive strength and elastic modulus of the pastes. The use of RCP as partial substitute for cement is viable, due to its size distribution and specific surface area.
{"title":"The effect of recycled concrete powder (RCP) from precast concrete plant on fresh and mechanical properties of cementitious pastes","authors":"Joaquin Humberto Aquino Rocha, Matheus Pimentel Tinoco, Romildo Dias Toledo Filho","doi":"10.3989/mc.2023.351923","DOIUrl":"https://doi.org/10.3989/mc.2023.351923","url":null,"abstract":"This study aims to evaluate the effect of RCP from a precast concrete plant on rheological and mechanical properties of cementitious pastes. In the study, Portland cement was replaced by RCP in 10, 20, and 30% (in mass). The hydration kinects of cement with RCP was studied through isothermal calorimetry. The fresh properties were assessed using mini-slump test and rotational rheometry. The mechanical properties were evaluated through compression tests and the microstruture was studied using Scanning Electron Microscopy. RCP reduces fluidity of the pastes, by increasing both yield stress and plastic viscosity. The addition of RCP accelerates the hydration of cement, while reducing the released heat. RCP also reduces the compressive strength and elastic modulus of the pastes. The use of RCP as partial substitute for cement is viable, due to its size distribution and specific surface area.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-11-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135868233","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Wei He, Shoujun Wu, Bo Zhang, Yanyu Liu, Yiming Luo, Guo Fu
This study presents the preparation of steel-fiber reinforced concretes (SFRCs) using straight navicular fibers with annular-sector-shaped sections and corrugated fiber with rectangular-shaped sections, respectively. The flexural and splitting tensile strengths of both the respective SFRCs increase with increasing fiber volume fraction, whereas their compressive strengths initially increase, then decrease, and then increase again. For the same fiber volume fraction, the mechanical properties of the navicular fiber-reinforced concrete are superior to those of the corrugated fiber-reinforced concretes. The introduction of steel fiber changes the failure mode of the plain concrete during bending from a typical brittle mode to a bimodal ductile failure mode. As compared to the corrugated fiber, the navicular fiber has stronger interface bonding to concrete and a higher friction resistance to fiber sliding and subsequent pullout. Furthermore, navicular fiber has a higher load-bearing capacity, which makes it more favorable for improving the mechanical properties of plain concrete.
{"title":"Effect of fiber section shape and volume fraction on the mechanical properties of steel-fiber reinforced concretes","authors":"Wei He, Shoujun Wu, Bo Zhang, Yanyu Liu, Yiming Luo, Guo Fu","doi":"10.3989/mc.2023.350223","DOIUrl":"https://doi.org/10.3989/mc.2023.350223","url":null,"abstract":"This study presents the preparation of steel-fiber reinforced concretes (SFRCs) using straight navicular fibers with annular-sector-shaped sections and corrugated fiber with rectangular-shaped sections, respectively. The flexural and splitting tensile strengths of both the respective SFRCs increase with increasing fiber volume fraction, whereas their compressive strengths initially increase, then decrease, and then increase again. For the same fiber volume fraction, the mechanical properties of the navicular fiber-reinforced concrete are superior to those of the corrugated fiber-reinforced concretes. The introduction of steel fiber changes the failure mode of the plain concrete during bending from a typical brittle mode to a bimodal ductile failure mode. As compared to the corrugated fiber, the navicular fiber has stronger interface bonding to concrete and a higher friction resistance to fiber sliding and subsequent pullout. Furthermore, navicular fiber has a higher load-bearing capacity, which makes it more favorable for improving the mechanical properties of plain concrete.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":"65 10","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-11-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135868672","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Xiaoguang Chen, Elke Gruyaert, Özlem Cizer, Jiabin Li
High water absorption is a typical characteristic of recycled coarse aggregate and is often used to explain the loss of performance of concrete when replacing natural coarse aggregate with recycled coarse aggregate. Extensive attention has been paid to the mean value of the water absorption of recycled coarse aggregate, but not to the standard deviation. This paper aims to assess whether recycled coarse aggregates with the same mean water absorption but different standard deviations will perform equally in high-performance concrete (HPC). The resulting HPC mixtures exhibited very similar compressive strength. Even so, it was hypothesised that as the standard deviation of the water absorption of recycled coarse aggregate increases over a wide range, the compressive strength of HPC will first increase due to local variations in the water/cement ratio, then decrease due to the presence of weak particles, and finally remain constant due to the role of the surrounding new mortar.
{"title":"The effect of water absorption distribution of recycled coarse aggregate on the compressive strength distribution of high-performance concrete","authors":"Xiaoguang Chen, Elke Gruyaert, Özlem Cizer, Jiabin Li","doi":"10.3989/mc.2023.350123","DOIUrl":"https://doi.org/10.3989/mc.2023.350123","url":null,"abstract":"High water absorption is a typical characteristic of recycled coarse aggregate and is often used to explain the loss of performance of concrete when replacing natural coarse aggregate with recycled coarse aggregate. Extensive attention has been paid to the mean value of the water absorption of recycled coarse aggregate, but not to the standard deviation. This paper aims to assess whether recycled coarse aggregates with the same mean water absorption but different standard deviations will perform equally in high-performance concrete (HPC). The resulting HPC mixtures exhibited very similar compressive strength. Even so, it was hypothesised that as the standard deviation of the water absorption of recycled coarse aggregate increases over a wide range, the compressive strength of HPC will first increase due to local variations in the water/cement ratio, then decrease due to the presence of weak particles, and finally remain constant due to the role of the surrounding new mortar.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":"4 4","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-11-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135972840","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Samuel Huaquisto Cáceres, Diana Karen Pari Quispe, Rafael Arnold Cruz Maron
The energy deficiency in rural housing in the Andes of Peru is recurrent. In this context, local and low environmental impact materials present an opportunity. This research evaluated the properties of five panels composed of totora and gypsum for ceiling applications. Firstly, the physical and durability properties were obtained. Then, impact and fire resistance were evaluated. Finally, thermoacoustic properties were assessed. The results showed a moisture level of 10.25%, water absorption of 354.85% which is considered high, and a dry density of 292.84 kg/m3. Adequate durability to fungus with resin on both sides. The panels’ fire resistance is superior to 60 minutes, with a safe impact criterion for 10 N and a functionality criterion for 5 N. The average values for the panels were 0.061 W/m·K for thermal insulation and 0.54 for NRC. Therefore, it is possible to produce an insulating material for thermoacoustic improvement.
{"title":"Eco-efficient thermoacoustic panels made of totora and gypsum for sustainable rural housing ceilings","authors":"Samuel Huaquisto Cáceres, Diana Karen Pari Quispe, Rafael Arnold Cruz Maron","doi":"10.3989/mc.2023.346323","DOIUrl":"https://doi.org/10.3989/mc.2023.346323","url":null,"abstract":"The energy deficiency in rural housing in the Andes of Peru is recurrent. In this context, local and low environmental impact materials present an opportunity. This research evaluated the properties of five panels composed of totora and gypsum for ceiling applications. Firstly, the physical and durability properties were obtained. Then, impact and fire resistance were evaluated. Finally, thermoacoustic properties were assessed. The results showed a moisture level of 10.25%, water absorption of 354.85% which is considered high, and a dry density of 292.84 kg/m3. Adequate durability to fungus with resin on both sides. The panels’ fire resistance is superior to 60 minutes, with a safe impact criterion for 10 N and a functionality criterion for 5 N. The average values for the panels were 0.061 W/m·K for thermal insulation and 0.54 for NRC. Therefore, it is possible to produce an insulating material for thermoacoustic improvement.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":"1 8","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-11-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135973683","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
J. Martínez, X. Rigueira, M. Araújo, E. Giráldez, A. Recamán
The traceability of granite blocks consists in identifying each block with a finite number of colour bands that represent a numerical code. This code has to be read several times throughout the manufacturing process, but its accuracy is subject to human errors, leading to cause faults in the traceability system. A computer vision system is presented to address this problem through colour detection and the decryption of the associated code. The system developed makes use of colour space transformations and various thresholds for the isolation of the colours. Computer vision methods are implemented, along with contour detection procedures for colour identification. Lastly, the analysis of geometrical features is used to decrypt the colour code captured. The proposed algorithm is trained on a set of 109 pictures taken in different environmental conditions and validated on a set of 21 images. The outcome shows promising results with an accuracy rate of 75.00% in the validation process. Therefore, the application presented can help employees reduce the number of mistakes in product tracking.
{"title":"Computer vision application for improved product traceability in the granite manufacturing industry","authors":"J. Martínez, X. Rigueira, M. Araújo, E. Giráldez, A. Recamán","doi":"10.3989/mc.2023.308922","DOIUrl":"https://doi.org/10.3989/mc.2023.308922","url":null,"abstract":"The traceability of granite blocks consists in identifying each block with a finite number of colour bands that represent a numerical code. This code has to be read several times throughout the manufacturing process, but its accuracy is subject to human errors, leading to cause faults in the traceability system. A computer vision system is presented to address this problem through colour detection and the decryption of the associated code. The system developed makes use of colour space transformations and various thresholds for the isolation of the colours. Computer vision methods are implemented, along with contour detection procedures for colour identification. Lastly, the analysis of geometrical features is used to decrypt the colour code captured. The proposed algorithm is trained on a set of 109 pictures taken in different environmental conditions and validated on a set of 21 images. The outcome shows promising results with an accuracy rate of 75.00% in the validation process. Therefore, the application presented can help employees reduce the number of mistakes in product tracking.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":"205 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135494029","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
To improve the workability in gypsum plasters, additives are sometimes used, including citric acid, which provides acceptable setting times for low w/g ratios, maximizing the mechanical properties of the material. The influence of citric acid on the fire response of gypsum coatings is not well known, and so our aim was to analyze the effects that citric acid produces on the behavior of gypsum plasters exposed to fire. Temperature measurements were made with sensors and thermal imaging cameras while other instrumental techniques, including SEM, XRD and TG, were used to characterize the microstructure and composition of gypsum materials subjected to the action of fire. The fire had a greater effect on gypsum plasters containing citric acid as revealed by the cracking patterns and heat propagation profiles observed. Likewise, micro-cracks were observed in gypsum specimens, containing and non-containing citric acid, exposed to fire. In all cases, the alterations were consistent with the temperature profiles and chemical composition of the faces whether exposed to fire or not.
{"title":"Influence of citric acid on the fire behavior of gypsum coatings of construction and structural elements","authors":"F.J. Castellón, M. Ayala, J. A. Flores, M. Lanzón","doi":"10.3989/MC.2021.13120","DOIUrl":"https://doi.org/10.3989/MC.2021.13120","url":null,"abstract":"To improve the workability in gypsum plasters, additives are sometimes used, including citric acid, which provides acceptable setting times for low w/g ratios, maximizing the mechanical properties of the material. The influence of citric acid on the fire response of gypsum coatings is not well known, and so our aim was to analyze the effects that citric acid produces on the behavior of gypsum plasters exposed to fire. Temperature measurements were made with sensors and thermal imaging cameras while other instrumental techniques, including SEM, XRD and TG, were used to characterize the microstructure and composition of gypsum materials subjected to the action of fire. The fire had a greater effect on gypsum plasters containing citric acid as revealed by the cracking patterns and heat propagation profiles observed. Likewise, micro-cracks were observed in gypsum specimens, containing and non-containing citric acid, exposed to fire. In all cases, the alterations were consistent with the temperature profiles and chemical composition of the faces whether exposed to fire or not.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":" ","pages":""},"PeriodicalIF":2.1,"publicationDate":"2021-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43841073","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Juradin, I. Netinger-Grubeša, S. Mrakovčić, D. Jozić
This paper deals with the possibility of the improvement of pervious concrete properties by incorporation of different types of fibres and studies the effect of short duration vibration of pervious concrete properties in comparison with compaction with wooden lath and hammer. Ten mixtures of pervious concrete were prepared, five of which were compacted with wooden lath and hammer and five by short duration vibration. Density, porosity, permeability and mechanical properties were tested for in hardened pervious concrete specimens. It was concluded that mixtures compacted by short duration vibration had better mechanical properties due to the formation of a viscous layer at the contact surface between the aggregate grain and the cement matrix during the compaction, as well as pore-related properties. The addition of fibres negatively affected porosity and permeability but generally improved mechanical properties of concrete. The positive effect of fibre addition was more emphasised in cases of vibrated mixtures.
{"title":"Impact of fibre incorporation and compaction method on properties of pervious concrete","authors":"S. Juradin, I. Netinger-Grubeša, S. Mrakovčić, D. Jozić","doi":"10.3989/MC.2021.08020","DOIUrl":"https://doi.org/10.3989/MC.2021.08020","url":null,"abstract":"This paper deals with the possibility of the improvement of pervious concrete properties by incorporation of different types of fibres and studies the effect of short duration vibration of pervious concrete properties in comparison with compaction with wooden lath and hammer. Ten mixtures of pervious concrete were prepared, five of which were compacted with wooden lath and hammer and five by short duration vibration. Density, porosity, permeability and mechanical properties were tested for in hardened pervious concrete specimens. It was concluded that mixtures compacted by short duration vibration had better mechanical properties due to the formation of a viscous layer at the contact surface between the aggregate grain and the cement matrix during the compaction, as well as pore-related properties. The addition of fibres negatively affected porosity and permeability but generally improved mechanical properties of concrete. The positive effect of fibre addition was more emphasised in cases of vibrated mixtures.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":" ","pages":""},"PeriodicalIF":2.1,"publicationDate":"2021-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45279221","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
L. Guo, S. Li, L. Zhong, L. Guo, L. Wang, F. Zhang, Y. Zhang, M. Wang
Owing to complex aspects of cemented sand and gravel (CSG), such as included unscreened aggregates, CSG properties differ from those of ordinary concrete. Fractal theory is introduced to study the effects of aggregate characteristics on CSG properties, quantifying aggregate gradation and shape. Numerical simulation and analyses show that: (1) improved aggregate gradation decreases the gradation fractal dimension and increases the CSG peak stress and elastic modulus; (2) more irregularly shaped aggregates increase the shape fractal dimension and decrease the CSG peak stress and elastic modulus; (3) the relationship quantified between aggregate characteristics and CSG mechanical properties provides a theoretical basis for aggregate allocation in engineering design and construction. Mixing artificial aggregates can improve aggregate gradation but reduces CSG performance. Appropriately blending artificial and on-site aggregates achieves optimal CSG performance; in this study, this is attained using 20% artificial aggregates added under standard gradation.
{"title":"A study on the effects of the fractal characteristics of aggregates on the mechanical behavior of cemented sand and gravel","authors":"L. Guo, S. Li, L. Zhong, L. Guo, L. Wang, F. Zhang, Y. Zhang, M. Wang","doi":"10.3989/MC.2021.13020","DOIUrl":"https://doi.org/10.3989/MC.2021.13020","url":null,"abstract":"Owing to complex aspects of cemented sand and gravel (CSG), such as included unscreened aggregates, CSG properties differ from those of ordinary concrete. Fractal theory is introduced to study the effects of aggregate characteristics on CSG properties, quantifying aggregate gradation and shape. Numerical simulation and analyses show that: (1) improved aggregate gradation decreases the gradation fractal dimension and increases the CSG peak stress and elastic modulus; (2) more irregularly shaped aggregates increase the shape fractal dimension and decrease the CSG peak stress and elastic modulus; (3) the relationship quantified between aggregate characteristics and CSG mechanical properties provides a theoretical basis for aggregate allocation in engineering design and construction. Mixing artificial aggregates can improve aggregate gradation but reduces CSG performance. Appropriately blending artificial and on-site aggregates achieves optimal CSG performance; in this study, this is attained using 20% artificial aggregates added under standard gradation.","PeriodicalId":51113,"journal":{"name":"Materiales de Construccion","volume":" ","pages":""},"PeriodicalIF":2.1,"publicationDate":"2021-05-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42876626","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：