Stubble burning in India continues despite the severe consequences on the environment and the massive health crisis in the country. Farmers resort to such practices as a cheap and hasty solution post-harvest, which helps them prepare for their next crops. This study employs a mathematical model, the ADM1 (Anaerobic Digestion Model No. 1), to design a virtual biogas plant in the SIMBA simulation platform. The plant was designed keeping the small-scale farmers in mind, hence, cost-effectiveness, simplicity in design and operation remained a priority. Simulations were performed with different crop leftovers that are widely subjected to on-farm burning in the country such as from rice, wheat, sugarcane, cotton and maize. Simulation trials were performed for each crop residue for nearly two years, to observe the digester performance and possible disruptions over prolonged periods. The optimal feeding ratio and operating conditions for process stability were determined. Simulations revealed generation of nearly 9–10 m3 methane per day, equivalent to 90–100 kWh electricity. Co-fermentation with animal manures was strongly recommended by the model for process stability and to avoid pH disruptions due to organic acid accumulations. Policy makers and farmers are, thus, encouraged to explore a sustainable alternative to generate energy from stubble.
{"title":"Biomethanation of Crop Residues to Combat Stubble Burning in India: Design and Simulation Using ADM1 Mathematical Model","authors":"P. Satpathy, C. Pradhan","doi":"10.3390/methane1020011","DOIUrl":"https://doi.org/10.3390/methane1020011","url":null,"abstract":"Stubble burning in India continues despite the severe consequences on the environment and the massive health crisis in the country. Farmers resort to such practices as a cheap and hasty solution post-harvest, which helps them prepare for their next crops. This study employs a mathematical model, the ADM1 (Anaerobic Digestion Model No. 1), to design a virtual biogas plant in the SIMBA simulation platform. The plant was designed keeping the small-scale farmers in mind, hence, cost-effectiveness, simplicity in design and operation remained a priority. Simulations were performed with different crop leftovers that are widely subjected to on-farm burning in the country such as from rice, wheat, sugarcane, cotton and maize. Simulation trials were performed for each crop residue for nearly two years, to observe the digester performance and possible disruptions over prolonged periods. The optimal feeding ratio and operating conditions for process stability were determined. Simulations revealed generation of nearly 9–10 m3 methane per day, equivalent to 90–100 kWh electricity. Co-fermentation with animal manures was strongly recommended by the model for process stability and to avoid pH disruptions due to organic acid accumulations. Policy makers and farmers are, thus, encouraged to explore a sustainable alternative to generate energy from stubble.","PeriodicalId":74177,"journal":{"name":"Methane","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-06-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47828705","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Caiyun Xu, Qian Song, Naǧme Merdanoǧlu, Hang Liu, E. Klemm
Exploring advanced catalysts and reaction systems operated at mild reaction conditions is crucial for conducting the direct methane oxidation reaction toward oxygenate products. Many efforts have been put into research on pentasil−type (MFI) zeolites based on mononuclear and/or binuclear iron sites, using H2O2 as the oxidant. In this work, we present a modified liquid ion−exchange method to better control Fe loading in a mordenite−type (MOR) zeolite with a Si/Al molar ratio of 9. The optimized Fe/MOR catalyst showed excellent performance in the direct methane oxidation reaction with turnover frequencies (TOFs) of 555 h−1 to C1 oxygenates, significantly better than the reported activity. Multiple comparative experiments were conducted to reveal the mechanism behind the performance. Strikingly, the active sites in the Fe/MOR catalyst were found to be mononuclear iron sites, confirmed by transmission electron microscopy (TEM), ultraviolet−visible diffuse reflectance spectroscopy (UV−vis DRS), and X-ray absorption spectroscopy (XAS). Increasing the iron loading led to the aggregation of the iron sites, which tend to trigger undesirable side reactions (i.e., H2O2 decomposition and over−oxidation), resulting in a significant decrease in TOFs to C1 oxygenates.
探索先进的催化剂和在温和反应条件下运行的反应体系是进行甲烷直接氧化反应的关键。以H2O2为氧化剂，研究了基于单核和/或双核铁位的五氟硅(MFI)分子筛。在这项工作中，我们提出了一种改进的液体离子交换方法，以更好地控制Si/Al摩尔比为9的丝光沸石型(MOR)沸石中的铁负载。优化后的Fe/MOR催化剂在甲烷直接氧化反应中表现出优异的性能，转换频率(TOFs)为555 h−1，明显优于已有报道的活性。多次对比实验揭示了性能背后的机制。值得注意的是，通过透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV - vis DRS)和x射线吸收光谱(XAS)证实，Fe/MOR催化剂中的活性位点是单核铁位点。铁负载的增加导致铁位点的聚集，这往往会引发不良的副反应(即H2O2分解和过氧化)，导致TOFs到C1氧合物的显著减少。
{"title":"Identifying Monomeric Fe Species for Efficient Direct Methane Oxidation to C1 Oxygenates with H2O2 over Fe/MOR Catalysts","authors":"Caiyun Xu, Qian Song, Naǧme Merdanoǧlu, Hang Liu, E. Klemm","doi":"10.3390/methane1020010","DOIUrl":"https://doi.org/10.3390/methane1020010","url":null,"abstract":"Exploring advanced catalysts and reaction systems operated at mild reaction conditions is crucial for conducting the direct methane oxidation reaction toward oxygenate products. Many efforts have been put into research on pentasil−type (MFI) zeolites based on mononuclear and/or binuclear iron sites, using H2O2 as the oxidant. In this work, we present a modified liquid ion−exchange method to better control Fe loading in a mordenite−type (MOR) zeolite with a Si/Al molar ratio of 9. The optimized Fe/MOR catalyst showed excellent performance in the direct methane oxidation reaction with turnover frequencies (TOFs) of 555 h−1 to C1 oxygenates, significantly better than the reported activity. Multiple comparative experiments were conducted to reveal the mechanism behind the performance. Strikingly, the active sites in the Fe/MOR catalyst were found to be mononuclear iron sites, confirmed by transmission electron microscopy (TEM), ultraviolet−visible diffuse reflectance spectroscopy (UV−vis DRS), and X-ray absorption spectroscopy (XAS). Increasing the iron loading led to the aggregation of the iron sites, which tend to trigger undesirable side reactions (i.e., H2O2 decomposition and over−oxidation), resulting in a significant decrease in TOFs to C1 oxygenates.","PeriodicalId":74177,"journal":{"name":"Methane","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48957688","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
W. Bekele, A. Guinguina, A. Zegeye, A. Simachew, M. Ramin
This review aims to elucidate the contemporary methods of measuring and estimating methane (CH4) emissions from ruminants. Six categories of methods for measuring and estimating CH4 emissions from ruminants are discussed. The widely used methods in most CH4 abatement experiments comprise the gold standard respiration chamber, in vitro incubation, and the sulfur hexafluoride (SF6) techniques. In the spot sampling methods, the paper discusses the sniffer method, the GreenFeed system, the face mask method, and the portable accumulation chamber. The spot sampling relies on the measurement of short-term breath data adequately on spot. The mathematical modeling methods focus on predicting CH4 emissions from ruminants without undertaking extensive and costly experiments. For instance, the Intergovernmental Panel on Climate Change (IPCC) provides default values for regional emission factors and other parameters using three levels of estimation (Tier 1, 2 and 3 levels), with Tier 1 and Tier 3 being the simplest and most complex methods, respectively. The laser technologies include the open-path laser technique and the laser CH4 detector. They use the laser CH4 detector and wireless sensor networks to measure CH4 flux. The micrometeorological methods rely on measurements of meteorological data in line with CH4 concentration. The last category of methods for measuring and estimating CH4 emissions in this paper is the emerging technologies. They include the blood CH4 concentration tracer, infrared thermography, intraruminal telemetry, the eddy covariance (EC) technique, carbon dioxide as a tracer gas, and polytunnel. The emerging technologies are essential for the future development of effective quantification of CH4 emissions from ruminants. In general, adequate knowledge of CH4 emission measurement methods is important for planning, implementing, interpreting, and comparing experimental results.
{"title":"Contemporary Methods of Measuring and Estimating Methane Emission from Ruminants","authors":"W. Bekele, A. Guinguina, A. Zegeye, A. Simachew, M. Ramin","doi":"10.3390/methane1020008","DOIUrl":"https://doi.org/10.3390/methane1020008","url":null,"abstract":"This review aims to elucidate the contemporary methods of measuring and estimating methane (CH4) emissions from ruminants. Six categories of methods for measuring and estimating CH4 emissions from ruminants are discussed. The widely used methods in most CH4 abatement experiments comprise the gold standard respiration chamber, in vitro incubation, and the sulfur hexafluoride (SF6) techniques. In the spot sampling methods, the paper discusses the sniffer method, the GreenFeed system, the face mask method, and the portable accumulation chamber. The spot sampling relies on the measurement of short-term breath data adequately on spot. The mathematical modeling methods focus on predicting CH4 emissions from ruminants without undertaking extensive and costly experiments. For instance, the Intergovernmental Panel on Climate Change (IPCC) provides default values for regional emission factors and other parameters using three levels of estimation (Tier 1, 2 and 3 levels), with Tier 1 and Tier 3 being the simplest and most complex methods, respectively. The laser technologies include the open-path laser technique and the laser CH4 detector. They use the laser CH4 detector and wireless sensor networks to measure CH4 flux. The micrometeorological methods rely on measurements of meteorological data in line with CH4 concentration. The last category of methods for measuring and estimating CH4 emissions in this paper is the emerging technologies. They include the blood CH4 concentration tracer, infrared thermography, intraruminal telemetry, the eddy covariance (EC) technique, carbon dioxide as a tracer gas, and polytunnel. The emerging technologies are essential for the future development of effective quantification of CH4 emissions from ruminants. In general, adequate knowledge of CH4 emission measurement methods is important for planning, implementing, interpreting, and comparing experimental results.","PeriodicalId":74177,"journal":{"name":"Methane","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-04-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47913354","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Methane is a chemical compound that can be found naturally on Earth [...]
甲烷是一种可以在地球上自然发现的化合物[…]
{"title":"Methane: A New Open Access Journal","authors":"P. Da Costa","doi":"10.3390/methane1010006","DOIUrl":"https://doi.org/10.3390/methane1010006","url":null,"abstract":"Methane is a chemical compound that can be found naturally on Earth [...]","PeriodicalId":74177,"journal":{"name":"Methane","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43230086","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Andrin Molla, Sonya Rivera, Phillip Pera, Michael Landaverde, R. Barat
The catalytic activation of CH4 by limited amounts of O2 produces a mixture of synthesis gas (CO, H2) and light hydrocarbons (C2Hx), the relative amounts of each depending on catalyst type and process conditions. Using an elementary reaction mechanism for the oxidative coupling of methane (OCM) on a La2O3/CeO2 catalyst derived from the literature, this study replaces the activating O2 with moist H2O2 vapor to reduce synthesis gas production while improving C2Hx yields and selectivities. As the H2O2 content of the activating oxidant rises, more of the CH4 conversion occurs in the gas phase instead of with the catalytic surface. In a packed bed reactor (PBR), the use of H2O2 allows the PBR “light-off” to occur using a lower feed temperature. In exchange for a small decline in CH4 conversion, C2Hx selectivity increases while synthesis gas production drops. In a continuous stirred tank reactor (CSTR), H2O2 improves C2Hx over synthesis gas across a wider range of feed temperatures than is possible with the PBR. This suggests the CSTR will likely reduce OCM preheating requirements.
{"title":"Expanded Reactor Engineering Calculations for the Oxidative Coupling of Methane","authors":"Andrin Molla, Sonya Rivera, Phillip Pera, Michael Landaverde, R. Barat","doi":"10.3390/methane1010005","DOIUrl":"https://doi.org/10.3390/methane1010005","url":null,"abstract":"The catalytic activation of CH4 by limited amounts of O2 produces a mixture of synthesis gas (CO, H2) and light hydrocarbons (C2Hx), the relative amounts of each depending on catalyst type and process conditions. Using an elementary reaction mechanism for the oxidative coupling of methane (OCM) on a La2O3/CeO2 catalyst derived from the literature, this study replaces the activating O2 with moist H2O2 vapor to reduce synthesis gas production while improving C2Hx yields and selectivities. As the H2O2 content of the activating oxidant rises, more of the CH4 conversion occurs in the gas phase instead of with the catalytic surface. In a packed bed reactor (PBR), the use of H2O2 allows the PBR “light-off” to occur using a lower feed temperature. In exchange for a small decline in CH4 conversion, C2Hx selectivity increases while synthesis gas production drops. In a continuous stirred tank reactor (CSTR), H2O2 improves C2Hx over synthesis gas across a wider range of feed temperatures than is possible with the PBR. This suggests the CSTR will likely reduce OCM preheating requirements.","PeriodicalId":74177,"journal":{"name":"Methane","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-02-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43433477","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The handheld, portable laser methane detector (LMD) was developed to detect gas leaks in industry from a safe distance. Since 2009, it has also been used to measure the methane (CH4) concentration in the breath of cattle, sheep, and goats to quantify their CH4 emissions. As there is no consensus on a uniform measurement and data-analysis protocol with the LMD, this article discusses important aspects of the measurement, the data analysis, and the applications of the LMD based on the literature. These aspects, such as the distance to the animal or the activity of the animals, should be fixed for all measurements of an experiment, and if this is not possible, they should at least be documented and considered as fixed effects in the statistical analysis. Important steps in data processing are thorough quality control and reduction in records to a single point measurement or “phenotype” for later analysis. The LMD can be used to rank animals according to their CH4 breath concentration and to compare average CH4 production at the group level. This makes it suitable for genetic and nutritional studies and for characterising different breeds and husbandry systems. The limitations are the lower accuracy compared to other methods, as only CH4 concentration and not flux can be measured, and the high amount of work required for the measurement. However, due to its flexibility and non-invasiveness, the LMD can be an alternative in environments where other methods are not suitable or a complement to other methods. It would improve the applicability of the LMD method if there were a common protocol for measurement and data analysis developed jointly by a group of researchers.
{"title":"Measuring Livestock CH4 Emissions with the Laser Methane Detector: A Review","authors":"D. Sorg","doi":"10.3390/methane1010004","DOIUrl":"https://doi.org/10.3390/methane1010004","url":null,"abstract":"The handheld, portable laser methane detector (LMD) was developed to detect gas leaks in industry from a safe distance. Since 2009, it has also been used to measure the methane (CH4) concentration in the breath of cattle, sheep, and goats to quantify their CH4 emissions. As there is no consensus on a uniform measurement and data-analysis protocol with the LMD, this article discusses important aspects of the measurement, the data analysis, and the applications of the LMD based on the literature. These aspects, such as the distance to the animal or the activity of the animals, should be fixed for all measurements of an experiment, and if this is not possible, they should at least be documented and considered as fixed effects in the statistical analysis. Important steps in data processing are thorough quality control and reduction in records to a single point measurement or “phenotype” for later analysis. The LMD can be used to rank animals according to their CH4 breath concentration and to compare average CH4 production at the group level. This makes it suitable for genetic and nutritional studies and for characterising different breeds and husbandry systems. The limitations are the lower accuracy compared to other methods, as only CH4 concentration and not flux can be measured, and the high amount of work required for the measurement. However, due to its flexibility and non-invasiveness, the LMD can be an alternative in environments where other methods are not suitable or a complement to other methods. It would improve the applicability of the LMD method if there were a common protocol for measurement and data analysis developed jointly by a group of researchers.","PeriodicalId":74177,"journal":{"name":"Methane","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43959784","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Muhammad Alfiza Farhan, Y. Sugai, N. Widodo, S. Syafrizal
The leakage of methane from the subsurface on the coalfield or natural gas field invariably becomes an important issue nowadays. In notable addition, materials such as activated carbon, zeolites, and Porapak have been successfully identified as adsorbents. Those adsorbents could adsorb methane at atmospheric pressure and room temperature. Therefore, in this scholarly study, a new method using adsorbents to detect points of methane leakage that can cover a wide-scale area was developed. In the beginning, the most capable adsorbent should be determined by quantifying adsorbed methane amount. Furthermore, checking the possibility of adsorption in the column diffusion and desorption method of adsorbents is equally necessary. The most capable adsorbent was activated carbon (AC), which can adsorb 1.187 × 10−3 mg-CH4/g-AC. Hereinafter, activated carbon successfully can adsorb methane through column diffusion, which simulates the situation of on-site measurement. The specific amount of adsorbed methane when the initial concentrations of CH4 in a bag were 200 ppm, 100 ppm, and 50 ppm was found to be 0.818 × 10−3 mg-CH4/g-AC, 0.397 × 10−3 mg-CH4/g-AC, 0.161 × 10−3 mg-CH4/g-AC, respectively. Desorption of activated carbon analysis shows that methane concentration increases during an hour in the temperature bath under 80 °C. In conclusion, soil methane leakage points can be detected using activated carbon by identifying the observed methane concentration increase.
{"title":"The Development of a Low-Cost Method for Monitoring Methane Leakage from the Subsurface of Natural Gas Fields","authors":"Muhammad Alfiza Farhan, Y. Sugai, N. Widodo, S. Syafrizal","doi":"10.3390/methane1010003","DOIUrl":"https://doi.org/10.3390/methane1010003","url":null,"abstract":"The leakage of methane from the subsurface on the coalfield or natural gas field invariably becomes an important issue nowadays. In notable addition, materials such as activated carbon, zeolites, and Porapak have been successfully identified as adsorbents. Those adsorbents could adsorb methane at atmospheric pressure and room temperature. Therefore, in this scholarly study, a new method using adsorbents to detect points of methane leakage that can cover a wide-scale area was developed. In the beginning, the most capable adsorbent should be determined by quantifying adsorbed methane amount. Furthermore, checking the possibility of adsorption in the column diffusion and desorption method of adsorbents is equally necessary. The most capable adsorbent was activated carbon (AC), which can adsorb 1.187 × 10−3 mg-CH4/g-AC. Hereinafter, activated carbon successfully can adsorb methane through column diffusion, which simulates the situation of on-site measurement. The specific amount of adsorbed methane when the initial concentrations of CH4 in a bag were 200 ppm, 100 ppm, and 50 ppm was found to be 0.818 × 10−3 mg-CH4/g-AC, 0.397 × 10−3 mg-CH4/g-AC, 0.161 × 10−3 mg-CH4/g-AC, respectively. Desorption of activated carbon analysis shows that methane concentration increases during an hour in the temperature bath under 80 °C. In conclusion, soil methane leakage points can be detected using activated carbon by identifying the observed methane concentration increase.","PeriodicalId":74177,"journal":{"name":"Methane","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49098750","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
C. Martinez, Juan F. Sandoval, Nathalia Ortiz, Sebastian Ovalle, Juan G. Beltran
Mechanisms of growth and dissociation, growth rates, and morphology of gas hydrates of methane, carbon dioxide, and two CH4:CO2 mixtures (80:20 and 30:70 nominal concentration) were studied using using high resolution images and very precise temperature control. Subcooling and a recently proposed mass transfer-based driving force were used to analyze the results. When crystal growth rates did not exceed 0.01 mm/s, all systems showed faceted, euhedral crystal habits at low driving forces. At higher driving forces and growth rates, morphologies were different for all systems. These results solve apparent contradictions in literature about the morphology of hydrates of methane, carbon dioxide, and their mixtures. Differences in the growth mechanism of methane-rich and carbon dioxide-rich hydrates were elucidated. It was also shown that hydrate growth of methane, carbon dioxide, and their mixtures proceed via partial dissociation of the growing crystal. Temperature gradients were used to dissociate hydrates at specific locations, which revealed a most interesting phenomenon: On dissociation, carbon dioxide-rich hydrates propagated onto the bare substrate while drawing water from the opposite side of the sample. Furthermore, it was shown that an abrupt change in morphology common to all systems could be correlated to a change in the slope of growth rate data. This change in morphology was explained by a shift in the crystal growth mechanism.
{"title":"Mechanisms, Growth Rates, and Morphologies of Gas Hydrates of Carbon Dioxide, Methane, and Their Mixtures","authors":"C. Martinez, Juan F. Sandoval, Nathalia Ortiz, Sebastian Ovalle, Juan G. Beltran","doi":"10.3390/methane1010002","DOIUrl":"https://doi.org/10.3390/methane1010002","url":null,"abstract":"Mechanisms of growth and dissociation, growth rates, and morphology of gas hydrates of methane, carbon dioxide, and two CH4:CO2 mixtures (80:20 and 30:70 nominal concentration) were studied using using high resolution images and very precise temperature control. Subcooling and a recently proposed mass transfer-based driving force were used to analyze the results. When crystal growth rates did not exceed 0.01 mm/s, all systems showed faceted, euhedral crystal habits at low driving forces. At higher driving forces and growth rates, morphologies were different for all systems. These results solve apparent contradictions in literature about the morphology of hydrates of methane, carbon dioxide, and their mixtures. Differences in the growth mechanism of methane-rich and carbon dioxide-rich hydrates were elucidated. It was also shown that hydrate growth of methane, carbon dioxide, and their mixtures proceed via partial dissociation of the growing crystal. Temperature gradients were used to dissociate hydrates at specific locations, which revealed a most interesting phenomenon: On dissociation, carbon dioxide-rich hydrates propagated onto the bare substrate while drawing water from the opposite side of the sample. Furthermore, it was shown that an abrupt change in morphology common to all systems could be correlated to a change in the slope of growth rate data. This change in morphology was explained by a shift in the crystal growth mechanism.","PeriodicalId":74177,"journal":{"name":"Methane","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41884062","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
During his doctoral studies (July 1989–January 1993) at the ETH Zurich, under the supervision of Prof [...]
在苏黎世联邦理工学院攻读博士期间（1989年7月至1993年1月），在教授〔…〕的指导下
{"title":"Publisher’s Note: Methane—An Open Access Journal","authors":"S. Lin, A. Witkowska, Peter Ribar","doi":"10.3390/methane1010001","DOIUrl":"https://doi.org/10.3390/methane1010001","url":null,"abstract":"During his doctoral studies (July 1989–January 1993) at the ETH Zurich, under the supervision of Prof [...]","PeriodicalId":74177,"journal":{"name":"Methane","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-07-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3390/methane1010001","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47877348","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：