Biotechnology for Biofuels and Bioproducts最新文献

Background: In a previous study, shaking speed was found to be an important factor affecting the population dynamics and lignocellulose-degrading activities of a synthetic lignocellulolytic microbial consortium composed of the bacteria Sphingobacterium paramultivorum w15, Citrobacter freundii so4, and the fungus Coniochaeta sp. 2T2.1. Here, the gene expression profiles of each strain in this consortium were examined after growth at two shaking speeds (180 and 60 rpm) at three time points (1, 5 and 13 days).

Results: The results indicated that, at 60 rpm, C. freundii so4 switched, to a large extent, from aerobic to flexible (aerobic/microaerophilic/anaerobic) metabolism, resulting in continued slow growth till late stage. In addition, Coniochaeta sp. 2T2.1 tended to occur to a larger extent in the hyphal form, with genes encoding adhesion proteins being highly expressed. Much like at 180 rpm, at 60 rpm, S. paramultivorum w15 and Coniochaeta sp. 2T2.1 were key players in hemicellulose degradation processes, as evidenced from the respective CAZy-specific transcripts. Coniochaeta sp. 2T2.1 exhibited expression of genes encoding arabinoxylan-degrading enzymes (i.e., of CAZy groups GH10, GH11, CE1, CE5 and GH43), whereas, at 180 rpm, some of these genes were suppressed at early stages of growth. Moreover, C. freundii so4 stably expressed genes that were predicted to encode proteins with (1) β-xylosidase/β-glucosidase and (2) peptidoglycan/chitinase activities, (3) stress response- and detoxification-related proteins. Finally, S. paramultivorum w15 showed involvement in vitamin B2 generation in the early stages across the two shaking speeds, while this role was taken over by C. freundii so4 at late stage at 60 rpm.

Conclusions: We provide evidence that S. paramultivorum w15 is involved in the degradation of mainly hemicellulose and in vitamin B2 production, and C. freundii so4 in the degradation of oligosaccharides or sugar dimers, next to detoxification processes. Coniochaeta sp. 2T2.1 was held to be strongly involved in cellulose and xylan (at early stages), next to lignin modification processes (at later stages). The synergism and alternative functional roles presented in this study enhance the eco-enzymological understanding of the degradation of lignocellulose in this tripartite microbial consortium.

Background: Organosolv pretreatment is one of the most efficient methods for delignification and boosting biomass saccharification. As compared to typical ethanol organosolv pretreatments, 1,4-butanediol (BDO) organosolv pretreatment is a high-boiling-point solvent pretreatment, which can generate low pressure in the reactor during high temperature cooking that improves the operation safety. Although several studies showed that organosolv pretreatment can lead to effective delignification and enhancement in glucan hydrolysis, there has been no studies on acid- and alkali-catalyzed BDO pretreatment, as well as their comparison on promoting biomass saccharification and lignin utilization.

Results: It was shown that BDO organosolv pretreatment was more effective in removing lignin from poplar as compared with typical ethanol organosolv pretreatment under the same pretreatment conditions. HCl-BDO pretreatment with 40 mM acid loading led to 82.04% of original lignin removed from biomass, as compared to the lignin removal of 59.66% in HCl-Ethanol pretreatment. Besides, acid-catalyzed BDO pretreatment was more effective in improving the enzymatic digestibility of poplar than alkali-catalyzed BDO pretreatment. As a result, HCl-BDO with acid loading of 40 mM provided a good enzymatic digestibility of cellulose (91.16%) and the maximum sugar yield of 79.41% from original woody biomass. The linear correlations between physicochemical structure (e.g., fiber swelling, cellulose crystallinity, crystallite size, surface lignin coverage and cellulose accessibility) changes of BDO pretreated poplar and enzymatic hydrolysis were plotted to figure out the main factors that influenced biomass saccharification. Moreover, acid-catalyzed BDO pretreatment mainly brought about the phenolic hydroxyl (PhOH) groups formation in lignin structure, while alkali-catalyzed BDO pretreatment mostly led to the lower molecular weight of lignin.

Conclusions: Results indicated that the acid-catalyzed BDO organosolv pretreatment could significantly improve enzymatic digestibility of the highly recalcitrant woody biomass. The great enzymatic hydrolysis of glucan resulted from increased cellulose accessibility, which mostly associated with the higher degree of delignification and hemicellulose solubilization, as well as the more increase in fiber swelling. Besides, lignin was recovered from the organic solvent, which could be used as natural antioxidants. The formation of phenolic hydroxyl groups in lignin structure and the lower molecular weight of lignin contributed to its greater radical scavenging capacity.

Background: Filamentous fungi possess an array of secreted enzymes to depolymerize the structural polysaccharide components of plant biomass. Sugar transporters play an essential role in nutrient uptake and sensing of extracellular signal molecules to inhibit or trigger the induction of lignocellulolytic enzymes. However, the identities and functions of transceptors associated with the induction of hemicellulase genes remain elusive.

Results: In this study, we reveal that the L-arabinose transporter MtLat-1 is associated with repression of hemicellulase gene expression in the filamentous fungus Myceliophthora thermophila. The absence of Mtlat-1 caused a decrease in L-arabinose uptake and consumption rates. However, mycelium growth, protein production, and hemicellulolytic activities were markedly increased in a ΔMtlat-1 mutant compared with the wild-type (WT) when grown on arabinan. Comparative transcriptomic analysis showed a different expression profile in the ΔMtlat-1 strain from that in the WT in response to arabinan, and demonstrated that MtLat-1 was involved in the repression of the main hemicellulase-encoding genes. A point mutation that abolished the L-arabinose transport activity of MtLat-1 did not impact the repression of hemicellulase gene expression when the mutant protein was expressed in the ΔMtlat-1 strain. Thus, the involvement of MtLat-1 in the expression of hemicellulase genes is independent of its transport activity. The data suggested that MtLat-1 is a transceptor that senses and transduces the molecular signal, resulting in downstream repression of hemicellulolytic gene expression. MtAra-1 protein directly regulated the expression of Mtlat-1 by binding to its promoter region. Transcriptomic profiling indicated that the transcription factor MtAra-1 also plays an important role in expression of arabinanolytic enzyme genes and L-arabinose catabolism.

Conclusions: M. thermophila MtLat-1 functions as a transceptor that is involved in L-arabinose transport and signal transduction associated with suppression of the expression of hemicellulolytic enzyme-encoding genes. The data presented in this study add to the models of the regulation of hemicellulases in filamentous fungi.

Background: 1,3-Propanediol (1,3-PDO) is a platform compound, which has been widely used in food, pharmaceutical and cosmetic industries. Compared with chemical methods, the biological synthesis of 1,3-PDO has shown promising applications owing to its mild conditions and environmental friendliness. However, the biological synthesis of 1,3-PDO still has the problem of low titer and yield due to the shortage of reducing powers.

Results: In this study, Klebsiella sp. strain YT7 was successfully isolated, which can synthesize 11.30 g/L of 1,3-PDO from glycerol in flasks. The intracellular redox regulation strategy based on the addition of electron mediators can increase the 1,3-PDO titer to 28.01 g/L. Furthermore, a co-culturing system consisting of strain YT7 and Shewanella oneidensis MR-1 was established, which can eliminate the supplementation of exogenous electron mediators and reduce the by-products accumulation. The 1,3-PDO yield reached 0.44 g/g and the final titer reached 62.90 g/L. The increased titer and yield were attributed to the increased redox levels and the consumption of by-products.

Conclusions: A two-bacterium co-culture system with Klebsiella sp. strain YT7 and S. oneidensis strain MR-1 was established, which realized the substitution of exogenous electron mediators and the reduction of by-product accumulation. Results provided theoretical basis for the high titer of 1,3-PDO production with low by-product concentration.

Background: The efficiency of downstream processes plays a crucial role in the transition from conventional petrochemical processes to sustainable biotechnological production routes. One promising candidate for product separation from fermentations with low energy demand and high selectivity is the adsorption of the target product on hydrophobic adsorbents. However, only limited knowledge exists about the interaction of these adsorbents and the bioprocess. The bioprocess could possibly be harmed by the release of inhibitory components from the adsorbent surface. Another possibility is co-adsorption of essential nutrients, especially in an in situ application, making these nutrients unavailable to the applied microorganism.

Results: A test protocol investigating adsorbent-bioprocess compatibility was designed and applied on a variety of adsorbents. Inhibitor release and nutrient adsorption was studied in an isolated manner. Respiratory data recorded by a RAMOS device was used to assess the influence of the adsorbents on the cultivation in three different microbial systems for up to six different adsorbents per system. While no inhibitor release was detected in our investigations, adsorption of different essential nutrients was observed.

Conclusion: The application of adsorption for product recovery from the bioprocess was proven to be generally possible, but nutrient adsorption has to be assessed for each application individually. To account for nutrient adsorption, adsorptive product separation should only be applied after sufficient microbial growth. Moreover, concentrations of co-adsorbed nutrients need to be increased to compensate nutrient loss. The presented protocol enables an investigation of adsorbent-bioprocess compatibility with high-throughput and limited effort.

Background: The exact mechanism by which fungal strains sense insoluble cellulose is unknown, but research points to the importance of transglycosylation products generated by fungi during cellulose breakdown. Here, we used multi-omics approach to identify the transglycosylation metabolites and determine their function in cellulase induction in a model strain, Talaromyces cellulolyticus MTCC25456.

Results: Talaromyces sp. is a novel hypercellulolytic fungal strain. Based on genome scrutiny and biochemical analysis, we predicted the presence of cellulases on the surface of its spores. We performed metabolome analysis to show that these membrane-bound cellulases act on polysaccharides to form a mixture of disaccharides and their transglycosylated derivatives. Inevitably, a high correlation existed between metabolite data and the KEGG enrichment analysis of differentially expressed genes in the carbohydrate metabolic pathway. Analysis of the contribution of the transglycosylation product mixtures to cellulase induction revealed a 57% increase in total cellulase. Further research into the metabolites, using in vitro induction tests and response surface methodology, revealed that Talaromyces sp. produces cell wall-breaking enzymes in response to cellobiose and gentiobiose as a stimulant. Precisely, a 2.5:1 stoichiometric ratio of cellobiose to gentiobiose led to a 2.4-fold increase in cellulase synthesis. The application of the optimized inducers in cre knockout strain significantly increased the enzyme output.

Conclusion: This is the first study on the objective evaluation and enhancement of cellulase production using optimized inducers. Inducer identification and genetic engineering boosted the cellulase production in the cellulolytic fungus Talaromyces sp.

Background: Chlorella sorokiniana FZU60 is a promising lutein producing microalga. A mixotrophy/photoautotrophy two-stage strategy can achieve high biomass concentration at stage 1 and high lutein content at stage 2, leading to excellent lutein production efficiency in C. sorokiniana FZU60. However, the underlying molecular mechanisms are still unclear, restraining the further improvement of lutein production.

Results: In this study, physiological and biochemical analysis revealed that photochemical parameters (Fv/Fm and NPQ) and photosynthetic pigments contents increased during the shift from mixotrophy to photoautotrophy, indicating that photosynthesis and photoprotection enhanced. Furthermore, transcriptomic analysis revealed that the glyoxylate cycle and TCA cycle were suppressed after the shift to photoautotrophy, leading to a decreased cell growth rate. However, the gene expression levels of photosynthesis, CO₂ fixation, autophagy, and lutein biosynthesis were upregulated at the photoautotrophy stage, demonstrating that microalgal cells could obtain more precursor to synthesize lutein for enhancing photosynthesis and reducing reactive oxygen species.

Conclusions: The findings help to elucidate the molecular mechanisms for high lutein production efficiency of C. sorokiniana FZU60 under the mixotrophy/photoautotrophy strategy, identify key functional genes responsible for lutein biosynthesis, and shed light on further improvement of lutein production by genetic or metabolic engineering in future studies.

Background: Plant carotenoids are essential for human health, having wide uses in dietary supplements, food colorants, animal feed additives, and cosmetics. With the increasing demand for natural carotenoids, plant carotenoids have gained great interest in both academic and industry research worldwide. Orange-fleshed sweetpotato (Ipomoea batatas) enriched with carotenoids is an ideal feedstock for producing natural carotenoids. However, limited information is available regarding the molecular mechanism responsible for carotenoid metabolism in sweetpotato tuberous roots.

Results: In this study, metabolic profiling of carotenoids and gene expression analysis were conducted at six tuberous root developmental stages of three sweetpotato varieties with different flesh colors. The correlations between the expression of carotenoid metabolic genes and carotenoid levels suggested that the carotenoid cleavage dioxygenase 4 (IbCCD4) and 9-cis-epoxycarotenoid cleavage dioxygenases 3 (IbNCED3) play important roles in the regulation of carotenoid contents in sweetpotato. Transgenic experiments confirmed that the total carotenoid content decreased in the tuberous roots of IbCCD4-overexpressing sweetpotato. In addition, IbCCD4 may be regulated by two stress-related transcription factors, IbWRKY20 and IbCBF2, implying that the carotenoid accumulation in sweeetpotato is possibly fine-tuned in responses to stress signals.

Conclusions: A set of key genes were revealed to be responsible for carotenoid accumulation in sweetpotato, with IbCCD4 acts as a crucial player. Our findings provided new insights into carotenoid metabolism in sweetpotato tuberous roots and insinuated IbCCD4 to be a target gene in the development of new sweetpotato varieties with high carotenoid production.

Background: Sensitivity to inhibitors derived from the pretreatment of plant biomass is a barrier to the consolidated bioprocessing of these complex substrates to fuels and chemicals by microbes. Spermidine is a low molecular weight aliphatic nitrogen compound ubiquitous in microorganisms, plants, and animals and is often associated with tolerance to stress. We recently showed that overexpression of the endogenous spermidine synthase enhanced tolerance of the Gram-positive bacterium, Clostridium thermocellum to the furan derivatives furfural and HMF.

Results: Here we show that co-expression with an NADPH-dependent heat-stable butanol dehydrogenase from Thermoanaerobacter pseudethanolicus further enhanced tolerance to furans and acetic acid and most strikingly resulted in an increase in thermotolerance at 65 °C.

Conclusions: Tolerance to fermentation inhibitors will facilitate the use of plant biomass substrates by thermophiles in general and this organism in particular. The ability to grow C. thermocellum at 65 °C has profound implications for metabolic engineering.

Bioethanol is recognized as a valuable substitute for renewable energy sources to meet the fuel and energy demand of the nation, considered an environmentally friendly resource obtained from agricultural residues such as sugarcane bagasse, rice straw, husk, wheat straw and corn stover. The energy demand is sustained using lignocellulosic biomass to produce bioethanol. Lignocellulosic biomass (LCBs) is the point of attention in replacing the dependence on fossil fuels. The recalcitrant structure of the lignocellulosic biomass is disrupted using effective pretreatment techniques that separate complex interlinked structures among cellulose, hemicellulose, and lignin. Pretreatment of biomass involves various physical, chemical, biological, and physiochemical protocols which are of importance, dependent upon their individual or combined dissolution effect. Physical pretreatment involves a reduction in the size of the biomass using mechanical, extrusion, irradiation, and sonification methods while chemical pretreatment involves the breaking of various bonds present in the LCB structure. This can be obtained by using an acidic, alkaline, ionic liquid, and organosolvent methods. Biological pretreatment is considered an environment-friendly and safe process involving various bacterial and fungal microorganisms. Distinct pretreatment methods, when combined and utilized in synchronization lead to more effective disruption of LCB, making biomass more accessible for further processing. These could be utilized in terms of their effectiveness for a particular type of cellulosic fiber and are namely steam explosion, liquid hot water, ammonia fibre explosion, CO₂ explosion, and wet air oxidation methods. The present review encircles various distinct and integrated pretreatment processes developed till now and their advancement according to the current trend and future aspects to make lignocellulosic biomass available for further hydrolysis and fermentation.