Ali Al Jumah, Abdulkareem Hindawi, Fakhriya Shuaibi, Jasbindra Singh, Mohamed Siyabi, Marya Al Salmi, Safia Hatmi, Anas Mazroui, Khalfan Harthy, N. Azri, Yousuf Sinani, I. Mahrouqi, S. Kindi, F. Saadi, J. Al-Joumaa
The South Oman clusters A and B have reclassified their Deep-Water Disposal wells (DWD) into water injection (WI) wells. This is a novel concept where the excess treated water will be used in the plantation of additional reed beds (Cluster A) and the farming of palm trees (Cluster B), as well as act as pressure support for nearby fields. This will help solve multiple issues at different levels namely helping the business achieve its objective of sustained oil production, helping local communities with employment and helping the organization care for the environment by reducing carbon footprints. This reclassification covers a huge water volume in Field-A and Field-B where 60,000 m3/day and 40,000 m3/day will be injected respectively in the aquifer. The remaining total excess volume of approx. 200,000m3/d will be used for reed beds and Million Date Palm trees Project. The approach followed for the reclassification and routing of water will: Safeguard the field value (oil reserves) by optimum water injectionMaintain the cap-rock integrity by reduced water injection into the aquifer.Reduce GHG intensity by ±50% as a result of (i) reduced power consumption to run the DWD pumps and (ii) the plantation of trees (reed beds and palm trees).Generate ICV (in-country value) opportunities in the area of operations for the local community to use the excess water at surface for various projects.Figure 1DWD Reclassification benefits Multiple teams (subsurface. Surface, operations), interfaces and systems have been associated to reflect the re-classification project. This was done through collaboration of different teams and sections (i.e. EC, EDM, SAP, Nibras, OFM, etc). Water injection targets and several KPIs have been incorporated in various dashboards for monitoring and compliance purposes. Figure 2Teams Integration and interfaces It offers not only a significant boost to the sustainability of the business, but also pursues PDO's Water Management Strategy to reduce Disposal to Zero by no later than the year 2030 This paper will discuss how the project was managed, explain the evaluation done to understand the extent of the pressure support in nearby fields from DWD and the required disposal rate to maintain the desired pressures. Hence, reclassifying that part of deep-water disposal volume to water injection (WI) which requires a totally different water flood management system to be built around it.
{"title":"Optimizing Field Development in South Sultanate of Oman Through Deep Water Disposal Dwd Reclassification","authors":"Ali Al Jumah, Abdulkareem Hindawi, Fakhriya Shuaibi, Jasbindra Singh, Mohamed Siyabi, Marya Al Salmi, Safia Hatmi, Anas Mazroui, Khalfan Harthy, N. Azri, Yousuf Sinani, I. Mahrouqi, S. Kindi, F. Saadi, J. Al-Joumaa","doi":"10.2118/207715-ms","DOIUrl":"https://doi.org/10.2118/207715-ms","url":null,"abstract":"\u0000 The South Oman clusters A and B have reclassified their Deep-Water Disposal wells (DWD) into water injection (WI) wells. This is a novel concept where the excess treated water will be used in the plantation of additional reed beds (Cluster A) and the farming of palm trees (Cluster B), as well as act as pressure support for nearby fields. This will help solve multiple issues at different levels namely helping the business achieve its objective of sustained oil production, helping local communities with employment and helping the organization care for the environment by reducing carbon footprints.\u0000 This reclassification covers a huge water volume in Field-A and Field-B where 60,000 m3/day and 40,000 m3/day will be injected respectively in the aquifer. The remaining total excess volume of approx. 200,000m3/d will be used for reed beds and Million Date Palm trees Project.\u0000 The approach followed for the reclassification and routing of water will: Safeguard the field value (oil reserves) by optimum water injectionMaintain the cap-rock integrity by reduced water injection into the aquifer.Reduce GHG intensity by ±50% as a result of (i) reduced power consumption to run the DWD pumps and (ii) the plantation of trees (reed beds and palm trees).Generate ICV (in-country value) opportunities in the area of operations for the local community to use the excess water at surface for various projects.Figure 1DWD Reclassification benefits\u0000 Multiple teams (subsurface. Surface, operations), interfaces and systems have been associated to reflect the re-classification project. This was done through collaboration of different teams and sections (i.e. EC, EDM, SAP, Nibras, OFM, etc). Water injection targets and several KPIs have been incorporated in various dashboards for monitoring and compliance purposes. Figure 2Teams Integration and interfaces\u0000 It offers not only a significant boost to the sustainability of the business, but also pursues PDO's Water Management Strategy to reduce Disposal to Zero by no later than the year 2030\u0000 This paper will discuss how the project was managed, explain the evaluation done to understand the extent of the pressure support in nearby fields from DWD and the required disposal rate to maintain the desired pressures. Hence, reclassifying that part of deep-water disposal volume to water injection (WI) which requires a totally different water flood management system to be built around it.","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"10 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78758936","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Todd Townsend, W. Moss, D. Heinisch, Kenneth P. Evans, C. Schandorf
Vibration measurement has become ubiquitous in drilling. Focus of drilling enhancement has expanded from traditional lateral and stick slip assessment to include torsional oscillations on motors, and high-frequency torsional oscillations (HFTO). Recent publications have highlighted the importance of these higher frequency measurements to analyze drilling dynamics and diagnose dysfunctions which can cause tool failures. A new vibration recorder will be presented which is capable of sampling at 2 kHz and higher to analyze non-linear transient dysfunctions. Most in-bit vibration measurement options utilize a single unsynchronized triaxial accelerometer and low speed gyro. This design practice inherits specific challenges to the measurement and prevents the ability to decouple lateral from angular acceleration. Use of two sets of symmetrically placed (180 degree opposing) accelerometers has been in practice, but design constraints limit this approach to larger bits. Utilization of a new, outer diameter (OD) mounted vibration recorder for slim hole bits/BHAs with multiple spatially separated triaxial accelerometers, and a high-speed precision gyro will be described and evaluated with a comparison to other commercially available options. Downhole vibration recorders have existed for over 20 years providing conventional drilling dynamics evaluation. These devices suffered from hardware limitations which constrained the customer to spaced out snapshots of time rather than continuous observation and required separate research modules to cover high frequency needs. This paper presents case studies utilizing a new vibration recorder which can cover these two customer needs in one device. Drilling Engineers desire a rapid turnaround macro view of synchronized downhole and surface data for offset well parameter optimization while research engineers desire a micro view with kilohertz range sample rate for a comprehensive understanding of all possible dysfunctions including HFTO, and high frequency shock, along with the capacity to research geology prediction techniques including fracture identification. Use of an advanced cloud-based software suite will be illustrated for a rapid high-level view of the full run with benchmarking capability of offset wells. Case study observations include stick slip identification covering 0 to above 600 rpm using a single gyroscope, and HFTO identification with accurate decoupling of tangential acceleration vs radial and lateral. Having the ability to satisfy both objectives with one device is new to the industry and presents a step change in capability. A new, advanced vibration recorder is detailed which includes synchronized, spatially separated triaxial accelerometers, a triaxial shock sensor, a highspeed triaxial gyroscope, and temperature sensors. With 5 gigabytes of high temperature flash memory, more than 2 kHz sample rate for burst data and 1s period for downhole processed data, logged downhole recordings can cov
{"title":"Advanced High Frequency In-Bit Vibration Measurement Including Independent, Spatially Separated Sensors for Proper Resolution of Vibration Components Including Lateral, Radial, and Tangential Acceleration","authors":"Todd Townsend, W. Moss, D. Heinisch, Kenneth P. Evans, C. Schandorf","doi":"10.2118/208110-ms","DOIUrl":"https://doi.org/10.2118/208110-ms","url":null,"abstract":"\u0000 Vibration measurement has become ubiquitous in drilling. Focus of drilling enhancement has expanded from traditional lateral and stick slip assessment to include torsional oscillations on motors, and high-frequency torsional oscillations (HFTO). Recent publications have highlighted the importance of these higher frequency measurements to analyze drilling dynamics and diagnose dysfunctions which can cause tool failures. A new vibration recorder will be presented which is capable of sampling at 2 kHz and higher to analyze non-linear transient dysfunctions.\u0000 Most in-bit vibration measurement options utilize a single unsynchronized triaxial accelerometer and low speed gyro. This design practice inherits specific challenges to the measurement and prevents the ability to decouple lateral from angular acceleration. Use of two sets of symmetrically placed (180 degree opposing) accelerometers has been in practice, but design constraints limit this approach to larger bits. Utilization of a new, outer diameter (OD) mounted vibration recorder for slim hole bits/BHAs with multiple spatially separated triaxial accelerometers, and a high-speed precision gyro will be described and evaluated with a comparison to other commercially available options.\u0000 Downhole vibration recorders have existed for over 20 years providing conventional drilling dynamics evaluation. These devices suffered from hardware limitations which constrained the customer to spaced out snapshots of time rather than continuous observation and required separate research modules to cover high frequency needs. This paper presents case studies utilizing a new vibration recorder which can cover these two customer needs in one device. Drilling Engineers desire a rapid turnaround macro view of synchronized downhole and surface data for offset well parameter optimization while research engineers desire a micro view with kilohertz range sample rate for a comprehensive understanding of all possible dysfunctions including HFTO, and high frequency shock, along with the capacity to research geology prediction techniques including fracture identification. Use of an advanced cloud-based software suite will be illustrated for a rapid high-level view of the full run with benchmarking capability of offset wells. Case study observations include stick slip identification covering 0 to above 600 rpm using a single gyroscope, and HFTO identification with accurate decoupling of tangential acceleration vs radial and lateral. Having the ability to satisfy both objectives with one device is new to the industry and presents a step change in capability.\u0000 A new, advanced vibration recorder is detailed which includes synchronized, spatially separated triaxial accelerometers, a triaxial shock sensor, a highspeed triaxial gyroscope, and temperature sensors. With 5 gigabytes of high temperature flash memory, more than 2 kHz sample rate for burst data and 1s period for downhole processed data, logged downhole recordings can cov","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"25 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81249088","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Critical micelle concentration (CMC) is a known indicator for surfactants such as corrosion inhibitors ability to partition from two phase systems such as oil and water. Most corrosion inhibitors are surface active and at critical micelle concentration, the chemical is partitioned to water, physadsorb on metallic surfaces and form a physical barrier between steel and water. This protective barrier thus prevents corrosion from taking place on the metal surface When the applied chemical concentration is equal or higher than the CMC, the chemical is available in aqueous phase, thus preventing corrosion. Therefore, it was suggested that CMC can be used as an indicator of optimal chemical dose for corrosion control1. The lower the CMC of a corrosion inhibitor product, the better is this chemical for corrosion control as the availability of the chemical in the aqueous phase increase and therefore, can achieve corrosion control with less amount of chemical. In this work, this physical property (CMC) was used as an indicator to differentiate corrosion inhibitor performance. The corrosion inhibitor formulations were built out by using combinatorial chemical methods and the arrays of chemical formulations were screened by utilizing high throughput robotics 2-4, using CMC as the selection guide. To validate the concept, several known corrosion inhibitor formulas were selected to optimize their efficacy. Each formula contained several active ingredients and a solvent package. These raw materials were blended in random but in a control, manner using combinatorial methodologies. Instead of rapidly blending a large number of formulations using robotics, the design of control (DOE) methods were utilized to constrain the number of blends. Once the formulations were generated by DOE method, using Design Expert software that can effectively explore a desired space. The development of an equally robust prescreening analysis was also developed. This was done by using the measurements of CMC with a high-throughput screening methodology. After formulation of a vast array of formulation by using Design Expert software, the products were screened for by CMC using automated surface tension workstation. Several formulations with lower CMC than the reference products were selected. The selected corrosion inhibitor formulations were identified and blended in larger scales. The efficacy of these products was tested by classical laboratory testing methods such as rotating cylinder electrode (RCE) and rotating cage autoclave (RCA) to determine their performance as anti-corrosion agents. These tests were performed against the original reference corrosion inhibitor. The testing indicated that several corrosion inhibitor formulations outperform the original blend thus validating the proof of concept.
{"title":"Development of New Corrosion Inhibitors Using Robotics with High Throughput Experimentation Methods","authors":"N. Obeyesekere, J. Wylde","doi":"10.2118/207336-ms","DOIUrl":"https://doi.org/10.2118/207336-ms","url":null,"abstract":"\u0000 Critical micelle concentration (CMC) is a known indicator for surfactants such as corrosion inhibitors ability to partition from two phase systems such as oil and water. Most corrosion inhibitors are surface active and at critical micelle concentration, the chemical is partitioned to water, physadsorb on metallic surfaces and form a physical barrier between steel and water. This protective barrier thus prevents corrosion from taking place on the metal surface When the applied chemical concentration is equal or higher than the CMC, the chemical is available in aqueous phase, thus preventing corrosion. Therefore, it was suggested that CMC can be used as an indicator of optimal chemical dose for corrosion control1. The lower the CMC of a corrosion inhibitor product, the better is this chemical for corrosion control as the availability of the chemical in the aqueous phase increase and therefore, can achieve corrosion control with less amount of chemical. In this work, this physical property (CMC) was used as an indicator to differentiate corrosion inhibitor performance.\u0000 The corrosion inhibitor formulations were built out by using combinatorial chemical methods and the arrays of chemical formulations were screened by utilizing high throughput robotics 2-4, using CMC as the selection guide. To validate the concept, several known corrosion inhibitor formulas were selected to optimize their efficacy. Each formula contained several active ingredients and a solvent package. These raw materials were blended in random but in a control, manner using combinatorial methodologies. Instead of rapidly blending a large number of formulations using robotics, the design of control (DOE) methods were utilized to constrain the number of blends.\u0000 Once the formulations were generated by DOE method, using Design Expert software that can effectively explore a desired space. The development of an equally robust prescreening analysis was also developed. This was done by using the measurements of CMC with a high-throughput screening methodology. After formulation of a vast array of formulation by using Design Expert software, the products were screened for by CMC using automated surface tension workstation. Several formulations with lower CMC than the reference products were selected.\u0000 The selected corrosion inhibitor formulations were identified and blended in larger scales. The efficacy of these products was tested by classical laboratory testing methods such as rotating cylinder electrode (RCE) and rotating cage autoclave (RCA) to determine their performance as anti-corrosion agents. These tests were performed against the original reference corrosion inhibitor.\u0000 The testing indicated that several corrosion inhibitor formulations outperform the original blend thus validating the proof of concept.","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"10 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80994826","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Globally, steam injection for heavy and high-viscous oil recovery is increasing, including carbonate reservoirs. Lack of full understanding such reservoir heating and limited information about production and injection rates of individual wells require to forecast steam injection not only deterministic and simple liquid displacement characteristic modeling types, but also the data-driven one, which covers the adaptive modeling. The implementation and validation of the adaptive system is presented in this paper by one of the world's largest carbonate reservoirs with heavy and high-viscous oil of the Usinsk field. Steam injection forecasting in such reservoirs is complicated by the unstable well interactions and relatively low additional oil production. In the adaptive geological model, vertical dimensions of cells are similar to gross thicknesses of stratigraphic layers. Geological parameters of cells with drilled wells do not necessarily match actual parameters of those wells since the cells include information of neighboring wells. During the adaptive hydrodynamic modeling, a reservoir pressure is reproduced by cumulative production and injection allocation among the 3D grid cells. Steam injection forecasting is firstly based on the liquid displacement characteristics, which are later modified considering well interactions. To estimate actual oil production of steamflooding using the reservoir adaptive geological and hydrodynamic models, dimensionless interaction coefficients of injection and production wells were first calculated. Then, fuzzy logic functions were created to evaluate the base oil production of reacting wells. For most of those wells, actual oil production was 25 – 30 % higher than the base case. Oil production of steamflooding for the next three-year period was carried out by modeling two options of the reservoir further development - with and without steam injection. Generally, forecasted oil production of the option with steam injection was about 5 % higher. The forecasting effectiveness of cyclic steam stimulations of production wells was done using the cross-section method, when the test sample was divided into two groups - the best and the worst, for which the average forecasted oil rates after the stimulations were respectively higher or lower than the average actual oil rate after the stimulations for the entire sample. The difference between the average actual oil rates after the stimulations of the best and the worst groups was 32 %, i.e. this is in how much the actual oil production could have increased if only the best group of the sample had been treated.
{"title":"Field Realization of Adaptive Reservoir Simulation for Steam Injection Forecasting","authors":"S. Ursegov, E. Taraskin, A. Zakharian","doi":"10.2118/207295-ms","DOIUrl":"https://doi.org/10.2118/207295-ms","url":null,"abstract":"\u0000 Globally, steam injection for heavy and high-viscous oil recovery is increasing, including carbonate reservoirs. Lack of full understanding such reservoir heating and limited information about production and injection rates of individual wells require to forecast steam injection not only deterministic and simple liquid displacement characteristic modeling types, but also the data-driven one, which covers the adaptive modeling. The implementation and validation of the adaptive system is presented in this paper by one of the world's largest carbonate reservoirs with heavy and high-viscous oil of the Usinsk field.\u0000 Steam injection forecasting in such reservoirs is complicated by the unstable well interactions and relatively low additional oil production. In the adaptive geological model, vertical dimensions of cells are similar to gross thicknesses of stratigraphic layers. Geological parameters of cells with drilled wells do not necessarily match actual parameters of those wells since the cells include information of neighboring wells. During the adaptive hydrodynamic modeling, a reservoir pressure is reproduced by cumulative production and injection allocation among the 3D grid cells. Steam injection forecasting is firstly based on the liquid displacement characteristics, which are later modified considering well interactions.\u0000 To estimate actual oil production of steamflooding using the reservoir adaptive geological and hydrodynamic models, dimensionless interaction coefficients of injection and production wells were first calculated. Then, fuzzy logic functions were created to evaluate the base oil production of reacting wells. For most of those wells, actual oil production was 25 – 30 % higher than the base case. Oil production of steamflooding for the next three-year period was carried out by modeling two options of the reservoir further development - with and without steam injection. Generally, forecasted oil production of the option with steam injection was about 5 % higher. The forecasting effectiveness of cyclic steam stimulations of production wells was done using the cross-section method, when the test sample was divided into two groups - the best and the worst, for which the average forecasted oil rates after the stimulations were respectively higher or lower than the average actual oil rate after the stimulations for the entire sample. The difference between the average actual oil rates after the stimulations of the best and the worst groups was 32 %, i.e. this is in how much the actual oil production could have increased if only the best group of the sample had been treated.","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"11 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81525554","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ayman Ismail Al Zawaideh, Khalifa Hassan Al Hosani, I. Boiko, Abdulla AlQassab, I. Khan
Compressors are widely used to transport gas offshore and onshore. Oil rigs and gas processing plants have several compressors operating either alone, in parallel or in trains. Hence, compressors must be controlled optimally to insure a high rate of production, and efficient power consumption. The aim of this paper is to provide a control algorithm to optimize the compressors operation in parallel in process industries, to minimize energy consumption in variable operating conditions. A dynamic control-oriented model of the compression system has been developed. The optimization algorithm is tested on an experimental prototype having two compressors connected in parallel. The developed optimization algorithm resulted in a better performance and a reduction of the total energy consumption compared to an equal load sharing scheme.
{"title":"Control-Oriented Modelling and Optimal Adaptive Control of Parallel Compressors","authors":"Ayman Ismail Al Zawaideh, Khalifa Hassan Al Hosani, I. Boiko, Abdulla AlQassab, I. Khan","doi":"10.2118/207459-ms","DOIUrl":"https://doi.org/10.2118/207459-ms","url":null,"abstract":"\u0000 Compressors are widely used to transport gas offshore and onshore. Oil rigs and gas processing plants have several compressors operating either alone, in parallel or in trains. Hence, compressors must be controlled optimally to insure a high rate of production, and efficient power consumption. The aim of this paper is to provide a control algorithm to optimize the compressors operation in parallel in process industries, to minimize energy consumption in variable operating conditions. A dynamic control-oriented model of the compression system has been developed. The optimization algorithm is tested on an experimental prototype having two compressors connected in parallel. The developed optimization algorithm resulted in a better performance and a reduction of the total energy consumption compared to an equal load sharing scheme.","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"301 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91553725","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Corbò, Tommaso Wolfler, Nicola Banchi, Ippolito Furgiuele, M. Farooq
The purpose of this paper is to present the various technological solutions optimized for the use of hydrogen, in transport, distribution, storage and utilization, analyzing their criticalities and advantages. Hydrogen compression is a fundamental step in the transportation and storage segments and continuous improvement are required. The greatest technological challenges are certainly the high pressures required for the various fields of use, the need to maintain a clean gas and to use materials that are not subject to embrittlement. The choice between the different compression technologies is based on the need for pressures and flow rates; in the case of high flow rates and low compression ratios a centrifugal compressor is preferable, while for low flow rates and high compression ratios the choice goes to piston compressors. To prevent gas contamination, dry reciprocating compressor are preferred because they allow to avoid an oil separator filter on the discharge. Current technology of reciprocating compressors allows to compress hydrogen up to 300 bar with lubricated machines, while with dry technology it is possible to reach up to 250 bar. A second criticality on reciprocating compressors is maintenance: the parts subject to wear need to be serviced every 8000 hour of operation. The use of innovative materials will increase the maintenance intervals reaching higher pressures without lubrication. To increase the pressure ratio with centrifugal compressor, it's needed to increase the rotating speed, therefore the peripheral speed, with materials suitable for H2, stages get high compression to reduce the number of compressor bodies. If the process conditions require high delivery pressures combined with large flow rates, a solution of centrifugal compressors alone would be able to manage the flow rate but not the required delivery pressure. On the other hand, the use of reciprocating compressors would require a considerable number of units. In this case, therefore, the optimal solution is to combine the two technologies, centrifugal and pistons, using the best features. A case study in which the superior performances of the hybrid solution in terms of total cost of ownership will be described and compared with traditional single technology compression train
{"title":"The Role of Turbomachinery in Enabling the Hydrogen Economy","authors":"S. Corbò, Tommaso Wolfler, Nicola Banchi, Ippolito Furgiuele, M. Farooq","doi":"10.2118/207312-ms","DOIUrl":"https://doi.org/10.2118/207312-ms","url":null,"abstract":"\u0000 The purpose of this paper is to present the various technological solutions optimized for the use of hydrogen, in transport, distribution, storage and utilization, analyzing their criticalities and advantages. Hydrogen compression is a fundamental step in the transportation and storage segments and continuous improvement are required. The greatest technological challenges are certainly the high pressures required for the various fields of use, the need to maintain a clean gas and to use materials that are not subject to embrittlement. The choice between the different compression technologies is based on the need for pressures and flow rates; in the case of high flow rates and low compression ratios a centrifugal compressor is preferable, while for low flow rates and high compression ratios the choice goes to piston compressors.\u0000 To prevent gas contamination, dry reciprocating compressor are preferred because they allow to avoid an oil separator filter on the discharge. Current technology of reciprocating compressors allows to compress hydrogen up to 300 bar with lubricated machines, while with dry technology it is possible to reach up to 250 bar. A second criticality on reciprocating compressors is maintenance: the parts subject to wear need to be serviced every 8000 hour of operation. The use of innovative materials will increase the maintenance intervals reaching higher pressures without lubrication.\u0000 To increase the pressure ratio with centrifugal compressor, it's needed to increase the rotating speed, therefore the peripheral speed, with materials suitable for H2, stages get high compression to reduce the number of compressor bodies.\u0000 If the process conditions require high delivery pressures combined with large flow rates, a solution of centrifugal compressors alone would be able to manage the flow rate but not the required delivery pressure. On the other hand, the use of reciprocating compressors would require a considerable number of units. In this case, therefore, the optimal solution is to combine the two technologies, centrifugal and pistons, using the best features.\u0000 A case study in which the superior performances of the hybrid solution in terms of total cost of ownership will be described and compared with traditional single technology compression train","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88560666","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Waqas, A. Alkobaisi, A. Yahia, W. Borland, Muhammad Atif Nawaz
An exploration well offshore UAE, which was the first of it's kind, was planned to be drilled from an island and within salt dome. Well planning was based on a structural model that was estimated using coarse 2D surface seismic (with no line crossing planned well location) and gravity measurements. This model, therefore, had a large uncertainty as to the salt location and geometry. Concerns of potential drilling hazards associated with salt required utilizing the ability of borehole seismic to look-ahead of bit to image salt and direct the well such that it would be sufficiently far away from salt face. Pre-job survey planning was first made assuming salt face to the northwest (based on gravity data) of wellhead and that the well would remain outside the salt. To ensure the well remains close, but not too close, Vertical Seismic Profile (VSP) was planned to include Salt Proximity Survey. Just prior to spudding, a surface core indicated salt was, in fact, southeast of wellhead, thus changing the objectives of VSP from locating how far away the well was from salt, to how soon will it exit salt. After survey modeling for four possible scenarios, Look-ahead Zero-Offset and Offset VSPs were acquired using vibroseis at the island, at each of four casing points and rapidly processed to guide drilling next sections. In the 26" section, the well started drilling in salt and there was concern that there would be problems with casing design if the well did not exit salt before 4000 ft. A Zero-Offset and Offset VSP were shot for reflection imaging off the salt face. The survey indicated the salt face was approaching the well but at low rate (due to dip) to ensure an exit before 4000 ft. The well was deviated southeast and it exited the salt at 3620 ft. In the 17.5" section, a second run of Zero-Offset and Offset VSP were acquired indicating the salt face was still moving away from the well toward the northwest. In the 12.25" section, a third set of Zero-Offset and Offset VSP was shot. This survey confirmed the salt face was moving continually northwest and it was suggested the well deviate northwest to remain closer to salt. A large reverse fault was also clearly imaged and confirmed by drilling. In the 8.5" section, the well was drilled northwest at high angle as could be tolerated until it was TDed below target formation "A". The final set of Zero-Offset and Offset VSP results showed the salt was, at the level of formation "A", farther northwest than could be imaged by these VSP. There has been little to no experience of drilling salt dome islands in Abu Dhabi. This paper demonstrated how look-ahead VSP guided exploration well drilling in the salt dome island. Out-of-the-box survey design and rapid turnaround processing successfully aided in imaging location of the salt face and allowed casing points to be made without having to plug back and sidetrack. Once out of the salt, VSP allowed the well to be drilled closer to salt without re-entering it.
{"title":"First Look-Ahead VSP Guided Salt Dome Island Exploration Well Drilling in the UAE","authors":"M. Waqas, A. Alkobaisi, A. Yahia, W. Borland, Muhammad Atif Nawaz","doi":"10.2118/207358-ms","DOIUrl":"https://doi.org/10.2118/207358-ms","url":null,"abstract":"\u0000 An exploration well offshore UAE, which was the first of it's kind, was planned to be drilled from an island and within salt dome. Well planning was based on a structural model that was estimated using coarse 2D surface seismic (with no line crossing planned well location) and gravity measurements. This model, therefore, had a large uncertainty as to the salt location and geometry. Concerns of potential drilling hazards associated with salt required utilizing the ability of borehole seismic to look-ahead of bit to image salt and direct the well such that it would be sufficiently far away from salt face.\u0000 Pre-job survey planning was first made assuming salt face to the northwest (based on gravity data) of wellhead and that the well would remain outside the salt. To ensure the well remains close, but not too close, Vertical Seismic Profile (VSP) was planned to include Salt Proximity Survey. Just prior to spudding, a surface core indicated salt was, in fact, southeast of wellhead, thus changing the objectives of VSP from locating how far away the well was from salt, to how soon will it exit salt. After survey modeling for four possible scenarios, Look-ahead Zero-Offset and Offset VSPs were acquired using vibroseis at the island, at each of four casing points and rapidly processed to guide drilling next sections.\u0000 In the 26\" section, the well started drilling in salt and there was concern that there would be problems with casing design if the well did not exit salt before 4000 ft. A Zero-Offset and Offset VSP were shot for reflection imaging off the salt face. The survey indicated the salt face was approaching the well but at low rate (due to dip) to ensure an exit before 4000 ft. The well was deviated southeast and it exited the salt at 3620 ft. In the 17.5\" section, a second run of Zero-Offset and Offset VSP were acquired indicating the salt face was still moving away from the well toward the northwest. In the 12.25\" section, a third set of Zero-Offset and Offset VSP was shot. This survey confirmed the salt face was moving continually northwest and it was suggested the well deviate northwest to remain closer to salt. A large reverse fault was also clearly imaged and confirmed by drilling. In the 8.5\" section, the well was drilled northwest at high angle as could be tolerated until it was TDed below target formation \"A\". The final set of Zero-Offset and Offset VSP results showed the salt was, at the level of formation \"A\", farther northwest than could be imaged by these VSP.\u0000 There has been little to no experience of drilling salt dome islands in Abu Dhabi. This paper demonstrated how look-ahead VSP guided exploration well drilling in the salt dome island. Out-of-the-box survey design and rapid turnaround processing successfully aided in imaging location of the salt face and allowed casing points to be made without having to plug back and sidetrack. Once out of the salt, VSP allowed the well to be drilled closer to salt without re-entering it.","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"21 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73577812","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ahmed ElSayed Ghonim, Amr Zeinhom Elfarran, O. Okasha, E. Haridy, M. Koriesh, Aly ElBasyouni Mousa, Ahmed Gaber AbdelSabor
This paper represents a challenging rig-less intervention in highly deviated wells with heavy oil that has always been a challenge to conventional electric line (e-line) that is not a valid intervention technique due to its inherent limitations in these harsh environments. Electric Coiled Tubing (E-CT) was utilized not only to achieve safer deployment of the guns, but also to allow real-time operations on three wells which were inaccessible due to heavy oil content and restricted e-line accessibility. A case study is presented for a campaign performed using E-CT to convey the perforating string while pumping nitrogen (N2) to lift the well and achieve flowing under-balance to maximize perforation clean-up and minimize skin. Real-time readings from gamma ray, pressure and temperature sensors were used to accurately position the guns, generate the desired dynamic underbalance, and finally validate successful detonation based on pressure and temperature responses. This was achieved while N2 lifting and firing the guns to optimize the required under-balance value providing immediate feedback related to the production gain to determine the zonal contributions and maximize the economical production gains. Dynamic wellbore behavior software modeling was also used to predict the dynamic under-balance effect for maximizing perforation efficiency. Deployment of E-CT was very challenging in terms of operational execution but was extremely beneficial for the safety of the pipe during such operations. A total of 13 runs comprising of milling, tubing cleaning and drifting were performed to remove the accumulated scales inside the production tubing and to ensure full accessibility to target intervals. Coiled Tubing (CT) dynamic modeling software was utilized to simulate the N2 rate needed to achieve the target underbalance while maintaining safe perforating parameters for the CT while firing the guns. As a result of software simulations, one of the three wells was then recommended for an acid wash treatment which achieved very effective results. 15 perforation runs were performed on the three wells re-perforating a total of 188 ft of interval, resulting in a production increase of more than 300%. This was a significant improvement compared to the previous campaign carried out in 2017 where perforating in static conditions showed no increase in production without work-over rig intervention. E-CT intervention also eliminated the need for waiting on rig schedule and avoiding deferred production.
{"title":"Maximizing Production by Perforating with Accurate Dynamic Underbalance Using Electric Coiled Tubing Offshore Egypt","authors":"Ahmed ElSayed Ghonim, Amr Zeinhom Elfarran, O. Okasha, E. Haridy, M. Koriesh, Aly ElBasyouni Mousa, Ahmed Gaber AbdelSabor","doi":"10.2118/207927-ms","DOIUrl":"https://doi.org/10.2118/207927-ms","url":null,"abstract":"\u0000 This paper represents a challenging rig-less intervention in highly deviated wells with heavy oil that has always been a challenge to conventional electric line (e-line) that is not a valid intervention technique due to its inherent limitations in these harsh environments. Electric Coiled Tubing (E-CT) was utilized not only to achieve safer deployment of the guns, but also to allow real-time operations on three wells which were inaccessible due to heavy oil content and restricted e-line accessibility.\u0000 A case study is presented for a campaign performed using E-CT to convey the perforating string while pumping nitrogen (N2) to lift the well and achieve flowing under-balance to maximize perforation clean-up and minimize skin. Real-time readings from gamma ray, pressure and temperature sensors were used to accurately position the guns, generate the desired dynamic underbalance, and finally validate successful detonation based on pressure and temperature responses. This was achieved while N2 lifting and firing the guns to optimize the required under-balance value providing immediate feedback related to the production gain to determine the zonal contributions and maximize the economical production gains. Dynamic wellbore behavior software modeling was also used to predict the dynamic under-balance effect for maximizing perforation efficiency.\u0000 Deployment of E-CT was very challenging in terms of operational execution but was extremely beneficial for the safety of the pipe during such operations. A total of 13 runs comprising of milling, tubing cleaning and drifting were performed to remove the accumulated scales inside the production tubing and to ensure full accessibility to target intervals. Coiled Tubing (CT) dynamic modeling software was utilized to simulate the N2 rate needed to achieve the target underbalance while maintaining safe perforating parameters for the CT while firing the guns. As a result of software simulations, one of the three wells was then recommended for an acid wash treatment which achieved very effective results.\u0000 15 perforation runs were performed on the three wells re-perforating a total of 188 ft of interval, resulting in a production increase of more than 300%. This was a significant improvement compared to the previous campaign carried out in 2017 where perforating in static conditions showed no increase in production without work-over rig intervention. E-CT intervention also eliminated the need for waiting on rig schedule and avoiding deferred production.","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"27 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83404677","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Classifying rock facies and estimating permeability is particularly challenging in Microporous dominated carbonate rocks. Reservoir rock types with a very small porosity range could have up to two orders of magnitude permeability difference resulting in high uncertainty in facies and permeability assignment in static and dynamic models. While seismic and conventional porosity logs can guide the mapping of large scale features to define resource density, estimating permeability requires the integration of advanced logs, core measurements, production data and a general understanding of the geologic depositional setting. Core based primary drainage capillary pressure measurements, including porous plate and mercury injection, offer a valuable insight into the relation between rock quality (i.e., permeability, pore throat size) and water saturation at various capillary pressure levels. Capillary pressure data was incorporated into a petrophysical workflow that compares current (Archie) water saturation at a particular height above free water level (i.e., capillary pressure) to the expected water saturation from core based capillary pressure measurements of various rock facies. This was then used to assign rock facies, and ultimately, estimate permeability along the entire wellbore, differentiating low quality microporous rocks from high quality grainstones with similar porosity values. The workflow first requires normalizing log based water saturations relative to structural position and proximity to the free water level to ensure that the only variable impacting current day water saturation is reservoir quality. This paper presents a case study where this workflow was used to detect the presence of grainstone facies in a giant Middle Eastern Carbonate Field. Log based algorithms were used to compare Archie water saturation with primary drainage core based saturation height functions of different rock facies to detect the presence of grainstones and estimate their permeability. Grainstones were then mapped spatially over the field and overlaid with field wide oil production and water injection data to confirm a positive correlation between predicted reservoir quality and productivity/injectivity of the reservoir facies. Core based permeability measurements were also used to confirm predicted permeability trends along wellbores where core was acquired. This workflow presents a novel approach in integrating core, log and dynamic production data to map high quality reservoir facies guiding future field development strategy, workover decisions, and selection of future well locations.
{"title":"Utilizing Capillary Pressure Measurements and Water Saturation Logs to Determine Reservoir Quality in a Giant Middle Eastern Carbonate Field","authors":"B. Alramahi, Qaed Jaafar, Hisham M. Al-Qassab","doi":"10.2118/207625-ms","DOIUrl":"https://doi.org/10.2118/207625-ms","url":null,"abstract":"\u0000 Classifying rock facies and estimating permeability is particularly challenging in Microporous dominated carbonate rocks. Reservoir rock types with a very small porosity range could have up to two orders of magnitude permeability difference resulting in high uncertainty in facies and permeability assignment in static and dynamic models. While seismic and conventional porosity logs can guide the mapping of large scale features to define resource density, estimating permeability requires the integration of advanced logs, core measurements, production data and a general understanding of the geologic depositional setting. Core based primary drainage capillary pressure measurements, including porous plate and mercury injection, offer a valuable insight into the relation between rock quality (i.e., permeability, pore throat size) and water saturation at various capillary pressure levels.\u0000 Capillary pressure data was incorporated into a petrophysical workflow that compares current (Archie) water saturation at a particular height above free water level (i.e., capillary pressure) to the expected water saturation from core based capillary pressure measurements of various rock facies. This was then used to assign rock facies, and ultimately, estimate permeability along the entire wellbore, differentiating low quality microporous rocks from high quality grainstones with similar porosity values. The workflow first requires normalizing log based water saturations relative to structural position and proximity to the free water level to ensure that the only variable impacting current day water saturation is reservoir quality.\u0000 This paper presents a case study where this workflow was used to detect the presence of grainstone facies in a giant Middle Eastern Carbonate Field. Log based algorithms were used to compare Archie water saturation with primary drainage core based saturation height functions of different rock facies to detect the presence of grainstones and estimate their permeability. Grainstones were then mapped spatially over the field and overlaid with field wide oil production and water injection data to confirm a positive correlation between predicted reservoir quality and productivity/injectivity of the reservoir facies. Core based permeability measurements were also used to confirm predicted permeability trends along wellbores where core was acquired.\u0000 This workflow presents a novel approach in integrating core, log and dynamic production data to map high quality reservoir facies guiding future field development strategy, workover decisions, and selection of future well locations.","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"67 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83256847","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Tendil, L. Galluccio, C. Breislin, Jawaher Alsabeai, A. Lavenu, Hidenori Obara
The Lower Cretaceous Lekhwair Formation is one of the most prolific oil reservoirs in onshore and offshore UAE, yet the available literature on this interval remains limited. Based on a recent study carried out in collaboration with ADNOC Offshore, the present paper provides new insights into the comprehension of the interplay between primary depositional and secondary diagenetic controls on the reservoir performance, which is of crucial importance for the refinement of the static and dynamic models. In offshore Abu Dhabi, the Lower Lekhwair Formation is characterised by an alternation of relatively thick argillaceous (dense zones) and clean limestones (reservoir zones). Reservoir zones consist of basal, low to moderate energy inner ramp deposits, grading upward into thick inner and mid-ramp sediments. Lithocodium/Bacinella is the volumetrically dominant skeletal allochem and can form m-thick, stacked floatstone units. Such Lithocodium/Bacinella-rich floatstones are interpreted to originate from a mid-ramp depositional setting as a result of an increase in the accommodation space. By contrast, the contribution of Lithocodium/Bacinella floatstones is significantly reduced in inner ramp settings where these tend to form cm- to dm-scale, laterally discontinuous interbeds. The combination of sedimentological findings with diagenetic data provided an enhanced understanding of the origin and variations of the reservoir quality across the Lower Lekhwair Formation. In more detail, the best reservoir quality occurs within poorly cemented, Lithocodium/Bacinella-rich floatstones with grain-supported matrices, which favoured the preservation of a macropore-dominated pore system allowing an effective fluid flow. By contrast, the mud-supported textures with only rare and localised occurrence of mm- to cm-scale Lithocodium/Bacinella clumps, present the poorest reservoir quality due to the isolated nature of the macropores and the relatively tight micrite matrix surrounding them. At the large scale, the Lower Lekhwair shows an upward increase in reservoir quality, consistently with the upward increase in abundance and thickness of the Lithocodium/Bacinella-rich floatstones. The integration of depositional features with diagenetic overprint in the Lower Lekhwair Formation shows the fundamental role played by Lithocodium/Bacinella-rich floatstones with grain-supported matrices on the reservoir quality distribution. The impact of the Lithocodium/Bacinella floatstone matrices on the reservoir performance was never investigated before and hence represents an element of innovation and a powerful tool to predict the distribution of the areas hosting the best reservoir properties.
{"title":"New Insights on the Lower Lekhwair Formation offshore Abu Dhabi: Understanding the Key Role of Lithocodium/bacinella Floatstones on Large Scale Reservoir Quality Variations","authors":"A. Tendil, L. Galluccio, C. Breislin, Jawaher Alsabeai, A. Lavenu, Hidenori Obara","doi":"10.2118/207692-ms","DOIUrl":"https://doi.org/10.2118/207692-ms","url":null,"abstract":"\u0000 The Lower Cretaceous Lekhwair Formation is one of the most prolific oil reservoirs in onshore and offshore UAE, yet the available literature on this interval remains limited. Based on a recent study carried out in collaboration with ADNOC Offshore, the present paper provides new insights into the comprehension of the interplay between primary depositional and secondary diagenetic controls on the reservoir performance, which is of crucial importance for the refinement of the static and dynamic models.\u0000 In offshore Abu Dhabi, the Lower Lekhwair Formation is characterised by an alternation of relatively thick argillaceous (dense zones) and clean limestones (reservoir zones). Reservoir zones consist of basal, low to moderate energy inner ramp deposits, grading upward into thick inner and mid-ramp sediments. Lithocodium/Bacinella is the volumetrically dominant skeletal allochem and can form m-thick, stacked floatstone units. Such Lithocodium/Bacinella-rich floatstones are interpreted to originate from a mid-ramp depositional setting as a result of an increase in the accommodation space. By contrast, the contribution of Lithocodium/Bacinella floatstones is significantly reduced in inner ramp settings where these tend to form cm- to dm-scale, laterally discontinuous interbeds.\u0000 The combination of sedimentological findings with diagenetic data provided an enhanced understanding of the origin and variations of the reservoir quality across the Lower Lekhwair Formation. In more detail, the best reservoir quality occurs within poorly cemented, Lithocodium/Bacinella-rich floatstones with grain-supported matrices, which favoured the preservation of a macropore-dominated pore system allowing an effective fluid flow. By contrast, the mud-supported textures with only rare and localised occurrence of mm- to cm-scale Lithocodium/Bacinella clumps, present the poorest reservoir quality due to the isolated nature of the macropores and the relatively tight micrite matrix surrounding them. At the large scale, the Lower Lekhwair shows an upward increase in reservoir quality, consistently with the upward increase in abundance and thickness of the Lithocodium/Bacinella-rich floatstones.\u0000 The integration of depositional features with diagenetic overprint in the Lower Lekhwair Formation shows the fundamental role played by Lithocodium/Bacinella-rich floatstones with grain-supported matrices on the reservoir quality distribution. The impact of the Lithocodium/Bacinella floatstone matrices on the reservoir performance was never investigated before and hence represents an element of innovation and a powerful tool to predict the distribution of the areas hosting the best reservoir properties.","PeriodicalId":10967,"journal":{"name":"Day 1 Mon, November 15, 2021","volume":"3 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90759060","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：