Pub Date : 2021-07-23DOI: 10.1109/ICMSP53480.2021.9513364
Lv Meilin
In the Beijing-Tianjin-Hebei region, there is a huge gap in the capacity of natural gas peak regulation. Due to the influence of fault development and complex structure in Jizhong Depression, the evaluation of fault sealing ability is the top priority in the feasibility study of reservoir construction, but it lacks theoretical support and evaluation criteria. In this study, by calculating the shale gouge ratio, fault plane normal pressure, fault activity rate and fault growth index of the main fault in the gas-bearing structure of Jizzhong depression, to explore the quantitative characterization of fault sealing property value and the correlation of oil reservior, gas reservoir and aquifer. Then the parameter boundary of fault sealing ability is established, and the quantitative evaluation standard of fault sealing ability of gas storage is obtained. It provides theoretical support and practical guidance for the selection and evaluation of new gas storage sites in Jizhong depression.
{"title":"Study on Quantitative Evaluation Standard of Fault Sealing Ability of Underground Gas Storage in Jizhong Depression","authors":"Lv Meilin","doi":"10.1109/ICMSP53480.2021.9513364","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513364","url":null,"abstract":"In the Beijing-Tianjin-Hebei region, there is a huge gap in the capacity of natural gas peak regulation. Due to the influence of fault development and complex structure in Jizhong Depression, the evaluation of fault sealing ability is the top priority in the feasibility study of reservoir construction, but it lacks theoretical support and evaluation criteria. In this study, by calculating the shale gouge ratio, fault plane normal pressure, fault activity rate and fault growth index of the main fault in the gas-bearing structure of Jizzhong depression, to explore the quantitative characterization of fault sealing property value and the correlation of oil reservior, gas reservoir and aquifer. Then the parameter boundary of fault sealing ability is established, and the quantitative evaluation standard of fault sealing ability of gas storage is obtained. It provides theoretical support and practical guidance for the selection and evaluation of new gas storage sites in Jizhong depression.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127298687","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-07-23DOI: 10.1109/ICMSP53480.2021.9513381
Yuxuan Xie
For the application of sensor networks in three-dimensional space, the main method of data transmission is to transmit data by finding spatial coordinate positions, Node localization is one of the key factors of wireless sensor networks. Based on the traditional RSSI algorithm, this paper presents an improved centroid location algorithm with higher accuracy. In the three-dimensional space, the problem of finding the coordinates of unknown nodes is based on the quadrilateral measurement method. The distance between the four known anchor nodes and the unknown node is first measured, and then a rough solution is obtained by centroid positioning, and finally the more accurate node can be obtained by the Newton iteration method. The improved algorithm is more suitable for the use of three-dimensional space, and has better positioning accuracy than the traditional RSSI algorithm.
{"title":"An optimized three-dimensional positioning algorithm for rssi-based wireless sensor network","authors":"Yuxuan Xie","doi":"10.1109/ICMSP53480.2021.9513381","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513381","url":null,"abstract":"For the application of sensor networks in three-dimensional space, the main method of data transmission is to transmit data by finding spatial coordinate positions, Node localization is one of the key factors of wireless sensor networks. Based on the traditional RSSI algorithm, this paper presents an improved centroid location algorithm with higher accuracy. In the three-dimensional space, the problem of finding the coordinates of unknown nodes is based on the quadrilateral measurement method. The distance between the four known anchor nodes and the unknown node is first measured, and then a rough solution is obtained by centroid positioning, and finally the more accurate node can be obtained by the Newton iteration method. The improved algorithm is more suitable for the use of three-dimensional space, and has better positioning accuracy than the traditional RSSI algorithm.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"31 6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126090709","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-07-23DOI: 10.1109/ICMSP53480.2021.9513226
Tang Jingman, Zhang Yali, Li Anran
In recent years, unmanned mobile platforms have been applied more and more widely in various fields of society, and the market has a strong actual demand for consumer navigation and positioning system. In this paper, a localization algorithm based on GNSS/IMU integrated navigation system combined with Lidar odometer is proposed. Graph optimization is used for multisensor data fusion. Experiments show the excellent performance of the algorithm.
{"title":"Research on Location Method Based on GNSS/IMU/LIDAR Multi-source Information Fusion","authors":"Tang Jingman, Zhang Yali, Li Anran","doi":"10.1109/ICMSP53480.2021.9513226","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513226","url":null,"abstract":"In recent years, unmanned mobile platforms have been applied more and more widely in various fields of society, and the market has a strong actual demand for consumer navigation and positioning system. In this paper, a localization algorithm based on GNSS/IMU integrated navigation system combined with Lidar odometer is proposed. Graph optimization is used for multisensor data fusion. Experiments show the excellent performance of the algorithm.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"49 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123753238","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
To overcome the disadvantages of complex control, poor robustness and unstable output voltage of traditional doubly-fed induction generator grid-side converter, a double closed-loop control system of DC bus voltage outer loop based on active disturbance rejection control (ADRC) and current inner loop based on PID is designed. By controlling the output current of the converter, the purpose of maintaining the constant DC bus voltage of the PWM converter on the grid-side and keeping the output unit power factor of the stator side is achieved. Not only can good control effect be achieved, but also the hardware complexity of the system can be reduced and the utilization efficiency of the doubly-fed induction generator can be improved. The simulation results show that the double closed-loop control strategy can effectively maintain the DC bus voltage stability of the grid-side converter, ensure that the DC voltage fluctuation is small, reduce the voltage distortion rate, and have a strong anti-interference ability.
{"title":"Double closed-loop control of converter based on active disturbance rejection","authors":"Hongyi Peng, Ruoyan Pan, Zhimin Zhang, Zhen Li, X. Zhu, Zhenxiong Zhou","doi":"10.1109/ICMSP53480.2021.9513362","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513362","url":null,"abstract":"To overcome the disadvantages of complex control, poor robustness and unstable output voltage of traditional doubly-fed induction generator grid-side converter, a double closed-loop control system of DC bus voltage outer loop based on active disturbance rejection control (ADRC) and current inner loop based on PID is designed. By controlling the output current of the converter, the purpose of maintaining the constant DC bus voltage of the PWM converter on the grid-side and keeping the output unit power factor of the stator side is achieved. Not only can good control effect be achieved, but also the hardware complexity of the system can be reduced and the utilization efficiency of the doubly-fed induction generator can be improved. The simulation results show that the double closed-loop control strategy can effectively maintain the DC bus voltage stability of the grid-side converter, ensure that the DC voltage fluctuation is small, reduce the voltage distortion rate, and have a strong anti-interference ability.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122133537","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-07-23DOI: 10.1109/ICMSP53480.2021.9513421
Y. Zhuang, Jiliang Zhang
In this paper, the secrecy performance from the perspective of secrecy outage probability(SOP) for a free space optical-radio frequency (FSO-RF) network with an amplify-and-forward (AF) relaying under the wiretapping of an eavesdropper is investigated. Specifically, a superimposed signal of two users is first transmitted from a source (S) to a relay (R) over an FSO link, and then converted by R into an electrical one and broadcasted to their corresponding users over the RF links, while an eavesdropper is overhearing this transmission. In addition, the information transmission in both hops is incorporated with a non-orthogonal multiple access technique. Assuming the FSO and the RF links undergo Gamma-Gamma fading and Nakagami-$m$ fading respectively, the analytical expression for SOP is first obtained and then verified with simulation results.
{"title":"Secrecy Probability of a NOMA based FSO-RF Network with Amplify-and-Forward Relaying","authors":"Y. Zhuang, Jiliang Zhang","doi":"10.1109/ICMSP53480.2021.9513421","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513421","url":null,"abstract":"In this paper, the secrecy performance from the perspective of secrecy outage probability(SOP) for a free space optical-radio frequency (FSO-RF) network with an amplify-and-forward (AF) relaying under the wiretapping of an eavesdropper is investigated. Specifically, a superimposed signal of two users is first transmitted from a source (S) to a relay (R) over an FSO link, and then converted by R into an electrical one and broadcasted to their corresponding users over the RF links, while an eavesdropper is overhearing this transmission. In addition, the information transmission in both hops is incorporated with a non-orthogonal multiple access technique. Assuming the FSO and the RF links undergo Gamma-Gamma fading and Nakagami-$m$ fading respectively, the analytical expression for SOP is first obtained and then verified with simulation results.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124194492","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-07-23DOI: 10.1109/ICMSP53480.2021.9513355
Yang Huaizhou, Xu Danyang
The structure of rock flakes is complex and difficult to be classified accurately. The proposed method to solve the problem is to use an image enhancement algorithm to enhance the rock slice image. In the study, the neural network ResNet50, which has a significant effect on fine-grained classification, was used to construct the rock cast thin section image classifier, and three image enhancement algorithms, CutOut, MixUp, and CutMix, were used to enhance the rock thin section image. The rock slice images used in the data set are from Ordos, and are divided into five categories according to the size of the rock. The experimental result obtained was that the CutOut algorithm performs well on the data set, and the accuracy of the classifier was as high as 93.39%, which is 1.3% higher than the result of only using ResNet50 for classification. The experimental results show the effectiveness of the image enhancement algorithm in the classification of rock slice images.
{"title":"Research and Analysis of Image Enhancement Algorithm in the Classification of Rock Thin Section Images","authors":"Yang Huaizhou, Xu Danyang","doi":"10.1109/ICMSP53480.2021.9513355","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513355","url":null,"abstract":"The structure of rock flakes is complex and difficult to be classified accurately. The proposed method to solve the problem is to use an image enhancement algorithm to enhance the rock slice image. In the study, the neural network ResNet50, which has a significant effect on fine-grained classification, was used to construct the rock cast thin section image classifier, and three image enhancement algorithms, CutOut, MixUp, and CutMix, were used to enhance the rock thin section image. The rock slice images used in the data set are from Ordos, and are divided into five categories according to the size of the rock. The experimental result obtained was that the CutOut algorithm performs well on the data set, and the accuracy of the classifier was as high as 93.39%, which is 1.3% higher than the result of only using ResNet50 for classification. The experimental results show the effectiveness of the image enhancement algorithm in the classification of rock slice images.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127662507","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Eddy current testing technology is widely used in traffic safety, and different excitation sources will affect the amount of information and test results of a single test result. According to the characteristics of square waves containing multiple harmonics, using pulse eddy current detection, based on the analysis of the working principle of pulsed eddy current detection, the 60 kg/m I-shaped rail is used as the object, and the model is established using ANSYS. The simulation compares the advantages and disadvantages of traditional eddy current testing and pulsed eddy current testing at the same damage depth, analyzes the effect of pulse excitation duty cycle on detection sensitivity, and uses curve fitting to optimize the design of the excitation source duty cycle. The results show that: 1) Compared with traditional eddy current testing, pulsed eddy current testing has a larger magnetic induction line coverage area and deeper sinking depth near the rail damage, so the information amount of a single detection is more abundant; 2) The impact of the excitation duty cycle on the sensitivity of defect detection is related to the depth of damage; 3) The detection sensitivity is optimal when the duty cycle is 20%, and the peak voltage of the receiving coil is 1.72V at this time.
{"title":"Optimized design of flaw detection method based on pulsed eddy current testing","authors":"Xianwei Wu, Yifan Chen, Jialing Huang, Xue Li, Chenke Yin, Yang Hong, Xin-tao Dai, Zhenghua Xu","doi":"10.1109/ICMSP53480.2021.9513405","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513405","url":null,"abstract":"Eddy current testing technology is widely used in traffic safety, and different excitation sources will affect the amount of information and test results of a single test result. According to the characteristics of square waves containing multiple harmonics, using pulse eddy current detection, based on the analysis of the working principle of pulsed eddy current detection, the 60 kg/m I-shaped rail is used as the object, and the model is established using ANSYS. The simulation compares the advantages and disadvantages of traditional eddy current testing and pulsed eddy current testing at the same damage depth, analyzes the effect of pulse excitation duty cycle on detection sensitivity, and uses curve fitting to optimize the design of the excitation source duty cycle. The results show that: 1) Compared with traditional eddy current testing, pulsed eddy current testing has a larger magnetic induction line coverage area and deeper sinking depth near the rail damage, so the information amount of a single detection is more abundant; 2) The impact of the excitation duty cycle on the sensitivity of defect detection is related to the depth of damage; 3) The detection sensitivity is optimal when the duty cycle is 20%, and the peak voltage of the receiving coil is 1.72V at this time.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127698328","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-07-23DOI: 10.1109/ICMSP53480.2021.9513332
Haoyang Li
With the frequent occurrence of natural disasters in recent years, emergency logistics and transportation have great significance. The optimization of the vehicle delivery route after disasters is a problem limited by capacity, time window, and cost. We construct a multi-objective model that considers the time window penalty cost to minimize the total costs and maximize the average satisfaction of the disaster sites during the delivery process. Then, we transfer the proposed multi-objective model to a single objective model. Last, an adaptive large neighborhood search (ALNS) algorithm is presented to solve this problem and the experimental results show that the algorithm achieves a high-quality solution on large-scale instances.
{"title":"Study of Receptive Spot Delivery Routing Problem based on Adaptive Large-scale Neighbor Search Algorithm","authors":"Haoyang Li","doi":"10.1109/ICMSP53480.2021.9513332","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513332","url":null,"abstract":"With the frequent occurrence of natural disasters in recent years, emergency logistics and transportation have great significance. The optimization of the vehicle delivery route after disasters is a problem limited by capacity, time window, and cost. We construct a multi-objective model that considers the time window penalty cost to minimize the total costs and maximize the average satisfaction of the disaster sites during the delivery process. Then, we transfer the proposed multi-objective model to a single objective model. Last, an adaptive large neighborhood search (ALNS) algorithm is presented to solve this problem and the experimental results show that the algorithm achieves a high-quality solution on large-scale instances.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125721319","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-07-23DOI: 10.1109/ICMSP53480.2021.9513374
Jiahui Yang, Ke Cao, Hong Li
In this paper, a gate $RC-mathrm{D}$ voltage equalizer circuit is studied. The purpose of this circuit is to solve the problem that the emitter voltage distribution of each component set is uneven when IGBT runs in series. The working principle of gate $RC-mathrm{D}$ voltage equalizer is described, and the functions of all components in the voltage equalizer are analyzed under different switching states of IGBT. Finally, a series voltage equalizer circuit model of IGBT is built on PSPICE platform for simulation. By comparing the simulation results of voltage equalizing circuit with or without voltage equalizing circuit, a good voltage equalizing effect is obtained after simulating voltage imbalance under 4000V DC voltage. It provides a guarantee condition for the stable operation of IGBT in series, thus verifying the feasibility of the scheme.
{"title":"Study on series voltage equalizing method of IGBT in high voltage circuits","authors":"Jiahui Yang, Ke Cao, Hong Li","doi":"10.1109/ICMSP53480.2021.9513374","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513374","url":null,"abstract":"In this paper, a gate $RC-mathrm{D}$ voltage equalizer circuit is studied. The purpose of this circuit is to solve the problem that the emitter voltage distribution of each component set is uneven when IGBT runs in series. The working principle of gate $RC-mathrm{D}$ voltage equalizer is described, and the functions of all components in the voltage equalizer are analyzed under different switching states of IGBT. Finally, a series voltage equalizer circuit model of IGBT is built on PSPICE platform for simulation. By comparing the simulation results of voltage equalizing circuit with or without voltage equalizing circuit, a good voltage equalizing effect is obtained after simulating voltage imbalance under 4000V DC voltage. It provides a guarantee condition for the stable operation of IGBT in series, thus verifying the feasibility of the scheme.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130978612","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-07-23DOI: 10.1109/ICMSP53480.2021.9513341
Wu Shaocheng, Ma Yue, Wang Bo, Chen Xiaowei, You Zilin, Huang Shukai, Huang Zhiyuan
With the emergence of digital grid concept, the current metering system using PTP (Precise Time Protocol) clock synchronization technology cannot provide a unified device clock system across entire network, which affects two-way real-time control of new energy. And it is difficult to meet the clock for new business transactions synchronization accuracy requirements. Under the original metering clock system, a multi-source clock weighted fusion technology was proposed that used 5G communication modules as reference clocks, and used Kalman filtering to complete step-by-step clock correction at all levels of network nodes to achieve coordinated correction of different external reference clocks. The highest clock synchronization accuracy ensure the consistency of real-time data collection clock. Based on field test data collected by the Shenzhen Power Supply Bureau, the results showed that the electricity bill settlement after clock synchronization optimization processing is closer to field settlement.
随着数字电网概念的出现，目前采用PTP (Precise Time Protocol，精确时间协议)时钟同步技术的计量系统无法提供全网统一的设备时钟系统，影响了新能源的双向实时控制。并且很难满足时钟对于新业务事务同步精度的要求。在原有计量时钟系统的基础上，提出了以5G通信模块作为参考时钟的多源时钟加权融合技术，利用卡尔曼滤波完成各级网络节点的分步时钟校正，实现不同外部参考时钟的协同校正。时钟同步精度高，保证实时数据采集时钟的一致性。基于深圳市供电局采集的现场测试数据，结果表明，时钟同步优化处理后的电费结算更接近现场结算。
{"title":"Metering Clock Enhancement Technology and New Service Applications Based on 5G Timing","authors":"Wu Shaocheng, Ma Yue, Wang Bo, Chen Xiaowei, You Zilin, Huang Shukai, Huang Zhiyuan","doi":"10.1109/ICMSP53480.2021.9513341","DOIUrl":"https://doi.org/10.1109/ICMSP53480.2021.9513341","url":null,"abstract":"With the emergence of digital grid concept, the current metering system using PTP (Precise Time Protocol) clock synchronization technology cannot provide a unified device clock system across entire network, which affects two-way real-time control of new energy. And it is difficult to meet the clock for new business transactions synchronization accuracy requirements. Under the original metering clock system, a multi-source clock weighted fusion technology was proposed that used 5G communication modules as reference clocks, and used Kalman filtering to complete step-by-step clock correction at all levels of network nodes to achieve coordinated correction of different external reference clocks. The highest clock synchronization accuracy ensure the consistency of real-time data collection clock. Based on field test data collected by the Shenzhen Power Supply Bureau, the results showed that the electricity bill settlement after clock synchronization optimization processing is closer to field settlement.","PeriodicalId":153663,"journal":{"name":"2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132505407","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：