The paper analyzes approaches to modeling the processes of interaction of concentrated solar radiation with materials. The experimental results obtained on the synthesis of materials from a melt in a solar furnace are presented. It is shown that when melting in a solar furnace under the influence of concentrated solar radiation of high density due to the acceleration of the recovery process, it is possible to obtain a fine-grained microstructure that gives the material enhanced mechanical and dielectric properties. It is shown that the relationship between the structure and properties of the materials obtained with the technological parameters of melting and cooling in a solar furnace can be used as an approach to modeling the interaction of concentrated solar radiation with materials
{"title":"Approaches to Simulation of Interaction of Concentrated Solar Radiation with Materials","authors":"Muhammad S. Paizullakhanov, R. Akbarov","doi":"10.17516/1999-494x-0316","DOIUrl":"https://doi.org/10.17516/1999-494x-0316","url":null,"abstract":"The paper analyzes approaches to modeling the processes of interaction of concentrated solar radiation with materials. The experimental results obtained on the synthesis of materials from a melt in a solar furnace are presented. It is shown that when melting in a solar furnace under the influence of concentrated solar radiation of high density due to the acceleration of the recovery process, it is possible to obtain a fine-grained microstructure that gives the material enhanced mechanical and dielectric properties. It is shown that the relationship between the structure and properties of the materials obtained with the technological parameters of melting and cooling in a solar furnace can be used as an approach to modeling the interaction of concentrated solar radiation with materials","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75228801","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The development new methods for measuring the electrophysical and geometric parameters multilayer dielectric medium in order to identify their layers, as well as to detect inhomogeneities in them, is an urgent scientific task. Methods for assessing the state the snow-ice cover are proposed, based on the identification layers of the snow-ice cover by the dielectric permittivity obtained indirectly as a result inclined sounding of the underlying surface by an electromagnetic wave with vertical and horizontal polarization. Under normal sensing the underlying surface, in the form snow-ice cover, by radio waves with vertical and horizontal polarization, the obtained values the reflection coefficient from the boundary layers the received signals are identical. Oblique sensing by a vertically polarized wave in the range from 25 to 90 degrees leads to a sharp dip in the values the reflection coefficient from the boundary layers at certain angles, so for dry snow – 47…55°, dry firn – 55 … 58° and dry ice – 58…61°. These angles characterize the dielectric properties the layers (permittivity), which are explained by the complete polarization the reflected wave in a plane perpendicular to the plane incidence, since at this moment the vibrations the layer's electrons along the direction their movement do not lead to the emission electromagnetic waves in the direction the reflected wave (absent). The given estimated values the complex relative permittivity snow-ice cover as two component medium air and ice at a temperature from minus one to minus forty degrees, or three component medium air, ice and water at zero temperature are a sample for establishing the identity the characteristic properties layers. The purpose this article is to develop methods for assessing the state snow-ice cover used in determining the possibility performing a safe landing a helicopter – type aircraft on an unprepared site with snow-ice cover based on the identification the obtained characteristics snow-ice cover layers based on the results radar sensing with calculated data
{"title":"Methods for Assessing the State of Snow-Ice Cover","authors":"V. Mashkov, V. Malyshev, P. Fedyunin","doi":"10.17516/1999-494x-0312","DOIUrl":"https://doi.org/10.17516/1999-494x-0312","url":null,"abstract":"The development new methods for measuring the electrophysical and geometric parameters multilayer dielectric medium in order to identify their layers, as well as to detect inhomogeneities in them, is an urgent scientific task. Methods for assessing the state the snow-ice cover are proposed, based on the identification layers of the snow-ice cover by the dielectric permittivity obtained indirectly as a result inclined sounding of the underlying surface by an electromagnetic wave with vertical and horizontal polarization. Under normal sensing the underlying surface, in the form snow-ice cover, by radio waves with vertical and horizontal polarization, the obtained values the reflection coefficient from the boundary layers the received signals are identical. Oblique sensing by a vertically polarized wave in the range from 25 to 90 degrees leads to a sharp dip in the values the reflection coefficient from the boundary layers at certain angles, so for dry snow – 47…55°, dry firn – 55 … 58° and dry ice – 58…61°. These angles characterize the dielectric properties the layers (permittivity), which are explained by the complete polarization the reflected wave in a plane perpendicular to the plane incidence, since at this moment the vibrations the layer's electrons along the direction their movement do not lead to the emission electromagnetic waves in the direction the reflected wave (absent). The given estimated values the complex relative permittivity snow-ice cover as two component medium air and ice at a temperature from minus one to minus forty degrees, or three component medium air, ice and water at zero temperature are a sample for establishing the identity the characteristic properties layers. The purpose this article is to develop methods for assessing the state snow-ice cover used in determining the possibility performing a safe landing a helicopter – type aircraft on an unprepared site with snow-ice cover based on the identification the obtained characteristics snow-ice cover layers based on the results radar sensing with calculated data","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"45 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80000580","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
V. Malyshev, V. Mashkov, Владимир Алексеевич Малышев, В.Г. Машков
The results calculations the electromagnetic wave propagation velocity in the snow-ice cover depending on the density, the proportion liquid water content, and the propagation speeds the electromagnetic wave in dry snow, dry firn, and dry ice vary very markedly depending on the proportion liquid water content, the preferred orientation, and the shape ice and air structure are presented. The inclusions in the snow. The performed estimates the complex relative permittivity the medium that determines the speed propagation electromagnetic waves show a noticeable influence the density, the proportion liquid water content and the structure the underlying surface (snow, firn, ice), which allows identifying the layers the underlying surface in order to remotely determine the possibility landing a helicopter-type aircraft on an unprepared site with snow-ice cover. Shown, when the portion the water content in the medium is equal to zero, which is typical for negative temperatures, the speed propagation electromagnetic waves in the medium will depend on the density the medium and structure the dry ice in a small range of 1 m/μs temperature. In dry snow, vertically and horizontally elongated or spherical inclusions make a significant contribution to the change in the speed propagation the electromagnetic wave. At zero temperature, in the frequency range of 2 ... 8 GHz, the share water content in the medium, the density and structure the medium will play a determining role in the speed propagation an electromagnetic wave in the medium. The purpose this article is to determine the change ranges speed propagation electromagnetic waves in snow-ice the underlying surface depending on the density, structure, water content to restore the structure the snow and ice according to radar sensing, a more accurate determination the depth snow and thickness ice cover used in the assessment the possibility the safe landing an aircraft the helicopter type on an unprepared ground with snow-ice cover
{"title":"The Speed Electromagnetic Wave Propagation in the Snow-Ice Underlying Surface","authors":"V. Malyshev, V. Mashkov, Владимир Алексеевич Малышев, В.Г. Машков","doi":"10.17516/1999-494x-0313","DOIUrl":"https://doi.org/10.17516/1999-494x-0313","url":null,"abstract":"The results calculations the electromagnetic wave propagation velocity in the snow-ice cover depending on the density, the proportion liquid water content, and the propagation speeds the electromagnetic wave in dry snow, dry firn, and dry ice vary very markedly depending on the proportion liquid water content, the preferred orientation, and the shape ice and air structure are presented. The inclusions in the snow. The performed estimates the complex relative permittivity the medium that determines the speed propagation electromagnetic waves show a noticeable influence the density, the proportion liquid water content and the structure the underlying surface (snow, firn, ice), which allows identifying the layers the underlying surface in order to remotely determine the possibility landing a helicopter-type aircraft on an unprepared site with snow-ice cover. Shown, when the portion the water content in the medium is equal to zero, which is typical for negative temperatures, the speed propagation electromagnetic waves in the medium will depend on the density the medium and structure the dry ice in a small range of 1 m/μs temperature. In dry snow, vertically and horizontally elongated or spherical inclusions make a significant contribution to the change in the speed propagation the electromagnetic wave. At zero temperature, in the frequency range of 2 ... 8 GHz, the share water content in the medium, the density and structure the medium will play a determining role in the speed propagation an electromagnetic wave in the medium. The purpose this article is to determine the change ranges speed propagation electromagnetic waves in snow-ice the underlying surface depending on the density, structure, water content to restore the structure the snow and ice according to radar sensing, a more accurate determination the depth snow and thickness ice cover used in the assessment the possibility the safe landing an aircraft the helicopter type on an unprepared ground with snow-ice cover","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"66 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"72845054","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The aim of the work is to develop techniques for detecting weediness in agricultural crops based on the use of the VARI vegetation index, calculated from the PlanetScope satellite data. The territories of the Krasnoyarsk Agricultural Research Institute of the Federal Research Center of the Krasnoyarsk Science Center of SB RAS near the village Minino (Central Siberia, Krasnoyarsk Region) were used as the object of the research. To calculate the vegetation index VARI of grain crops, the algorithm for receiving and processing PlanetScope satellite data was developed. On its basis, a map of the spatial distribution of the VARI index for wheat crops with various degrees of weediness was made. According to the satellite data of PlanetScope (VARI), possibility to interpret the areas of wheat sowing with a high and low degree of weediness during the growing season is shown. It was revealed that the VARI value of wheat crops with a low degree of infestation is greater than the VARI value of wheat crops with a high degree of infestation
{"title":"The Technology for Detecting Weeds in Agricultural Crops Based on Vegetation Index VARI (PlanetScope)","authors":"M. Erunova, T. Pisman, Anatoliy P. Shevyrnogov","doi":"10.17516/1999-494x-0314","DOIUrl":"https://doi.org/10.17516/1999-494x-0314","url":null,"abstract":"The aim of the work is to develop techniques for detecting weediness in agricultural crops based on the use of the VARI vegetation index, calculated from the PlanetScope satellite data. The territories of the Krasnoyarsk Agricultural Research Institute of the Federal Research Center of the Krasnoyarsk Science Center of SB RAS near the village Minino (Central Siberia, Krasnoyarsk Region) were used as the object of the research. To calculate the vegetation index VARI of grain crops, the algorithm for receiving and processing PlanetScope satellite data was developed. On its basis, a map of the spatial distribution of the VARI index for wheat crops with various degrees of weediness was made. According to the satellite data of PlanetScope (VARI), possibility to interpret the areas of wheat sowing with a high and low degree of weediness during the growing season is shown. It was revealed that the VARI value of wheat crops with a low degree of infestation is greater than the VARI value of wheat crops with a high degree of infestation","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"89 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84244441","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Valeriy V. Zamaraev, A. Kutuzov, Igor V. Lyutikov, Dmitry V. Malcev
The article noted the contradictions in the theory and practice of the subject area of the study confirming the urgency of the task of constructing the trajectory of a hidden exit the aircraft at a given point of the detection area surveillance radar based on the spectrum analysis of the Doppler frequency of the received signal, the proposed initial data (initial conditions), describes the scientific and methodological apparatus of the embodiment of the method for generating control signals to implement the synthesized method, which allows to increase the effectiveness of air and space attack
{"title":"Method of Constructing a Line Secretive Exit the Aircraft at a Given Point of the Detection Area Surveillance Radar Based on the Spectrum Analysis of the Doppler Frequency of the Received Signal","authors":"Valeriy V. Zamaraev, A. Kutuzov, Igor V. Lyutikov, Dmitry V. Malcev","doi":"10.17516/1999-494x-0309","DOIUrl":"https://doi.org/10.17516/1999-494x-0309","url":null,"abstract":"The article noted the contradictions in the theory and practice of the subject area of the study confirming the urgency of the task of constructing the trajectory of a hidden exit the aircraft at a given point of the detection area surveillance radar based on the spectrum analysis of the Doppler frequency of the received signal, the proposed initial data (initial conditions), describes the scientific and methodological apparatus of the embodiment of the method for generating control signals to implement the synthesized method, which allows to increase the effectiveness of air and space attack","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"9 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88424586","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
P. A. Starodubtsev, G. Dorofeev, Andrey O. Lipovetskiy
The study of the vibration parameters of ship structures is important for developing measures to ensure their reliable operation on ships. The commonly used analysis of vibrograms using the Continuous Fourier Transform (CFT) to accurately represent non-stationary functions in general and noise source signals in particular is unsuitable due to a number of drawbacks. The problems of spectral analysis and time-limited signal synthesis can be partially solved by switching to the Window Fourier Transform (WFT). The disadvantage of the WFT is that its calculation uses a fixed window, which cannot be adapted to the local properties of the signal. In order to get rid of this shortcoming for the analysis of vibrogram you can use wavelet transform. It also solves a number of other problems related to the processing of a noise signal. The word “wavelet” means small waves following each other (some sources have introduced the concept of “splash”). In a narrow sense, wavelets are a family of functions obtained by scaling and shifting a single, parent function. In a broad sense, wavelets are functions with frequency localization, whose average value is zero. The article shows the signs of a wavelet. Examples of the most common wavelet functions are given. The use of wavelet functions is proposed not only on the basis of time, but also frequency transformations. The implementation of the algorithm for analyzing vibration measurement data is proposed. An example of vibration measurement data and the results of their processing based on frequency wavelet analysis are given
{"title":"Vibration Parameters Study of Ship Structures Using Wavelet Analysis of Vibrogram","authors":"P. A. Starodubtsev, G. Dorofeev, Andrey O. Lipovetskiy","doi":"10.17516/1999-494x-0311","DOIUrl":"https://doi.org/10.17516/1999-494x-0311","url":null,"abstract":"The study of the vibration parameters of ship structures is important for developing measures to ensure their reliable operation on ships. The commonly used analysis of vibrograms using the Continuous Fourier Transform (CFT) to accurately represent non-stationary functions in general and noise source signals in particular is unsuitable due to a number of drawbacks. The problems of spectral analysis and time-limited signal synthesis can be partially solved by switching to the Window Fourier Transform (WFT). The disadvantage of the WFT is that its calculation uses a fixed window, which cannot be adapted to the local properties of the signal. In order to get rid of this shortcoming for the analysis of vibrogram you can use wavelet transform. It also solves a number of other problems related to the processing of a noise signal. The word “wavelet” means small waves following each other (some sources have introduced the concept of “splash”). In a narrow sense, wavelets are a family of functions obtained by scaling and shifting a single, parent function. In a broad sense, wavelets are functions with frequency localization, whose average value is zero. The article shows the signs of a wavelet. Examples of the most common wavelet functions are given. The use of wavelet functions is proposed not only on the basis of time, but also frequency transformations. The implementation of the algorithm for analyzing vibration measurement data is proposed. An example of vibration measurement data and the results of their processing based on frequency wavelet analysis are given","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"381 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75154567","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
V. P. Berdyshev, A. Zhuravlev, Nikita V. Kopylov, V. Kopylov, Vitaly V. Loy
The article presents the structure of the method for the synthesis of microwave bandpass filters (BPF) on non-uniform lines, which makes it possible to select the structure and parameters of the BPF that provide the maximum length of the stop band to meet the requirements of electromagnetic compatibility (EMC) with given restrictions on the attenuation characteristics in the passband and barrier bands. and the established design and technological limitations on the drop in wave resistance and manufacturing tolerances. The results of experimental studies of the characteristics of ultrahigh-frequency bandpass filters with an increased protective band in order to ensure EMC are presented
{"title":"Experimental Study of the Characteristics of Band-Passed Ultra-High Frequency Filters with Increased Protective Band in the Interest of Ensuring Electromagnetic Compatibility","authors":"V. P. Berdyshev, A. Zhuravlev, Nikita V. Kopylov, V. Kopylov, Vitaly V. Loy","doi":"10.17516/1999-494x-0308","DOIUrl":"https://doi.org/10.17516/1999-494x-0308","url":null,"abstract":"The article presents the structure of the method for the synthesis of microwave bandpass filters (BPF) on non-uniform lines, which makes it possible to select the structure and parameters of the BPF that provide the maximum length of the stop band to meet the requirements of electromagnetic compatibility (EMC) with given restrictions on the attenuation characteristics in the passband and barrier bands. and the established design and technological limitations on the drop in wave resistance and manufacturing tolerances. The results of experimental studies of the characteristics of ultrahigh-frequency bandpass filters with an increased protective band in order to ensure EMC are presented","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"6 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78431164","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In this article investigates the effect of the content of plasticizers on the properties of rubbers based on rubber BNKS-18 AMN. The traditional, widely used dioctyl phthalate (DOP), as well as the more modern, environmentally friendly dioctyl terephthalate (DOTP), were used as plasticizers. It has been established that the introduction of plasticizers contributes to the production of rubbers with an improved complex of operational properties, such as elasticity, frost resistance, resistance to the corrosive media SZhR-3. At the same time, according to the research results, it was revealed that the introduction of plasticizers in an amount of 20 phr leads to the most noticeable improvement in these properties. In terms of physicomechanical and low temperature properties, the samples containing DOTP significantly exceed those of the samples containing DOP. Thus, our data showed that the use of DOTP is promising as an alternative to the widely used DOP.
{"title":"Influence of the Content and Nature of the Plasticizer on the Properties of Butadiene-Nitrile Rubber","authors":"V. V. Pavlova, M. Sokolova, A. Fedorova","doi":"10.17516/1999-494X-0303","DOIUrl":"https://doi.org/10.17516/1999-494X-0303","url":null,"abstract":"In this article investigates the effect of the content of plasticizers on the properties of rubbers based on rubber BNKS-18 AMN. The traditional, widely used dioctyl phthalate (DOP), as well as the more modern, environmentally friendly dioctyl terephthalate (DOTP), were used as plasticizers. It has been established that the introduction of plasticizers contributes to the production of rubbers with an improved complex of operational properties, such as elasticity, frost resistance, resistance to the corrosive media SZhR-3. At the same time, according to the research results, it was revealed that the introduction of plasticizers in an amount of 20 phr leads to the most noticeable improvement in these properties. In terms of physicomechanical and low temperature properties, the samples containing DOTP significantly exceed those of the samples containing DOP. Thus, our data showed that the use of DOTP is promising as an alternative to the widely used DOP.","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"38 1","pages":"222-232"},"PeriodicalIF":0.0,"publicationDate":"2021-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74068284","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
G. Dobra, Sorin Iliev, L. Cotet, Alina Boiangiu, I. Hulka, Lidia Kim, G. Catrina, L. Filipescu
This paper is reporting the data of a preliminary study on heavy metals distribution in the fluid and solid phases involved in dry and classified aluminium hydroxide production through Bayer process. For heavy metals released in the fluid phases, the main source of contamination is the bauxite through its mineralogical phases soluble or insoluble in alkaline solution. It was shown that predominant way to transfer contaminating elements in aluminium hydroxide particles is the occlusion of very fine particles coming from mineralogical phases of bauxite residue. New born mineralogical phases from bauxite residue, like poor crystallized sodalite and cancrinite, are the most active occlusion contaminants.
{"title":"Heavy Metals as Impurities in the Bayer Production Cycle of the Aluminum Hydroxide from Sierra Leone Bauxite. Preliminary Study","authors":"G. Dobra, Sorin Iliev, L. Cotet, Alina Boiangiu, I. Hulka, Lidia Kim, G. Catrina, L. Filipescu","doi":"10.17516/1999-494X-0296","DOIUrl":"https://doi.org/10.17516/1999-494X-0296","url":null,"abstract":"This paper is reporting the data of a preliminary study on heavy metals distribution in the fluid and solid phases involved in dry and classified aluminium hydroxide production through Bayer process. For heavy metals released in the fluid phases, the main source of contamination is the bauxite through its mineralogical phases soluble or insoluble in alkaline solution. It was shown that predominant way to transfer contaminating elements in aluminium hydroxide particles is the occlusion of very fine particles coming from mineralogical phases of bauxite residue. New born mineralogical phases from bauxite residue, like poor crystallized sodalite and cancrinite, are the most active occlusion contaminants.","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"15 1","pages":"151-165"},"PeriodicalIF":0.0,"publicationDate":"2021-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88056164","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ekaterina S. Skornyakova, D. V. Lichargin, Pavel V. Polunian
The paper introduces a new concept – trans-forest. A forest is a complex of additional connected trees. The skeleton of the graph is the basic multi-hierarchy. Subjects and “forces” are sources of moves on the playing field of the trans-forest based on the rules of the generative grammars of Montague. Each move of all generative grammars is synchronized with the meta-generative grammar – the “daemon of time”. Each turn over a trans-forest can be done by moving the present marker on the time tree to the “Next” position. Particular attention is paid to the format tree and transconnections between trees and its levels, since it is the format tree that determines human behavior in certain situations. An algorithm of evolutionarily justified expansions is proposed, the purpose of which is to ensure well-being for the subject himself and other subjects. The proposed trans-forest model is intended for modeling educational, language IT marketing, geological and other situations from the point of view of graph theory and game theory.
{"title":"Game Graph and Formats Approach for Mixlingual Data Ontology for Geological and Marketing Tasks","authors":"Ekaterina S. Skornyakova, D. V. Lichargin, Pavel V. Polunian","doi":"10.17516/1999-494X-0306","DOIUrl":"https://doi.org/10.17516/1999-494X-0306","url":null,"abstract":"The paper introduces a new concept – trans-forest. A forest is a complex of additional connected trees. The skeleton of the graph is the basic multi-hierarchy. Subjects and “forces” are sources of moves on the playing field of the trans-forest based on the rules of the generative grammars of Montague. Each move of all generative grammars is synchronized with the meta-generative grammar – the “daemon of time”. Each turn over a trans-forest can be done by moving the present marker on the time tree to the “Next” position. Particular attention is paid to the format tree and transconnections between trees and its levels, since it is the format tree that determines human behavior in certain situations. An algorithm of evolutionarily justified expansions is proposed, the purpose of which is to ensure well-being for the subject himself and other subjects. The proposed trans-forest model is intended for modeling educational, language IT marketing, geological and other situations from the point of view of graph theory and game theory.","PeriodicalId":17206,"journal":{"name":"Journal of Siberian Federal University: Engineering & Technologies","volume":"49 1","pages":"252-259"},"PeriodicalIF":0.0,"publicationDate":"2021-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84851898","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：