Xue‐li Ma, Ke‐yong Wang, Ruoshi Jin, Jianguo Li, Hong-ying Zhou, He Yang
The Qianjiadian deposit is a typical sandstone‐hosted uranium deposit that is hosted mainly in sandstone and siltstone of the Lower Cretaceous Yaojia Formation, located within the transition between the Kailu Depression and Jiamatu Uplift in the Songliao Basin, northeastern China. We studied the geological characteristics of this deposit, and analysed the mineralized sandstone by scanning electron microscopy (SEM) and electron probe microanalysis (EPMA) to identify the host minerals of fluid inclusions associated with uranium mineralization and describe their petrographic characteristics. In addition, this research investigated the origin of ore‐forming fluids and the relationship between petroleum fluids and uranium mineralization, based on the following findings. (1) EPMA and SEM data show that uranium minerals are hosted mainly in hydrothermal quartz (HQ) within sandstone cement, which indicates that uranium minerals co‐precipitated with HQ. (2) The fluid inclusions in the HQ show low homogenization temperatures (102.5–169.5°C) and low salinities (1.7–6.1 wt%). In contrast, aqueous inclusions in quartz overgrowths show lower temperatures (60.5–117°C) and higher salinities (4.2–8.7 wt%). (3) Petroleum fluids trapped in HQ homogenize fluid and those along healed microfractures in quartz overgrowth or plagioclase overgrowths at ~70–80°C, those trapped in present‐day organic inclusions at ~85–95°C, and at the boundary of detrital mineral grains show higher homogenization temperatures (~135–145°C). These results indicate that the hydrothermal quartz cement is associated with uranium mineralization, and the ore‐forming fluid of Qianjiadian sandstone‐hosted uranium deposit are characterized by low‐temperature, low‐salinity hydrothermal fluids, and the changes of temperature and salinity of hydrothermal fluids may not be intimately associated with uranium mineralization.
{"title":"Characteristics of fluid inclusions in the sandstone‐hosted Qianjiadian uranium deposit, southwest Songliao Basin, northeastern China: Implications for the nature and evolution of ore‐forming fluids","authors":"Xue‐li Ma, Ke‐yong Wang, Ruoshi Jin, Jianguo Li, Hong-ying Zhou, He Yang","doi":"10.1111/rge.12281","DOIUrl":"https://doi.org/10.1111/rge.12281","url":null,"abstract":"The Qianjiadian deposit is a typical sandstone‐hosted uranium deposit that is hosted mainly in sandstone and siltstone of the Lower Cretaceous Yaojia Formation, located within the transition between the Kailu Depression and Jiamatu Uplift in the Songliao Basin, northeastern China. We studied the geological characteristics of this deposit, and analysed the mineralized sandstone by scanning electron microscopy (SEM) and electron probe microanalysis (EPMA) to identify the host minerals of fluid inclusions associated with uranium mineralization and describe their petrographic characteristics. In addition, this research investigated the origin of ore‐forming fluids and the relationship between petroleum fluids and uranium mineralization, based on the following findings. (1) EPMA and SEM data show that uranium minerals are hosted mainly in hydrothermal quartz (HQ) within sandstone cement, which indicates that uranium minerals co‐precipitated with HQ. (2) The fluid inclusions in the HQ show low homogenization temperatures (102.5–169.5°C) and low salinities (1.7–6.1 wt%). In contrast, aqueous inclusions in quartz overgrowths show lower temperatures (60.5–117°C) and higher salinities (4.2–8.7 wt%). (3) Petroleum fluids trapped in HQ homogenize fluid and those along healed microfractures in quartz overgrowth or plagioclase overgrowths at ~70–80°C, those trapped in present‐day organic inclusions at ~85–95°C, and at the boundary of detrital mineral grains show higher homogenization temperatures (~135–145°C). These results indicate that the hydrothermal quartz cement is associated with uranium mineralization, and the ore‐forming fluid of Qianjiadian sandstone‐hosted uranium deposit are characterized by low‐temperature, low‐salinity hydrothermal fluids, and the changes of temperature and salinity of hydrothermal fluids may not be intimately associated with uranium mineralization.","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"87 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81092860","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Longxiang Ye, Dayu Zhang, Shiwei Wang, T. Zhou, F. Yuan, N. White, W. Xiao
The Baishan molybdenum deposit is located in the central part of the Eastern Tianshan‐Beishan tectonic belt, NW China. The deposit is hosted in early Carboniferous Gandun Formation biotite‐rich hornfels and is genetically related to unexposed granodiorite porphyry beneath the orebodies. The molybdenite occurs in three different types from early to late stage: Molybdenite ‐ Fe‐Cu‐sulfides ‐ K‐feldspar ‐ quartz veins (Group 1); Molybdenite ‐ Fe‐Cu‐sulfides ‐ quartz veins (Group 2); and disseminated molybdenite in the wall rock (Group 3). Rhenium concentrations in the molybdenite grains range from 108 to 277 ppm in Group 1, 69–121 ppm in Group 2 and 46–135 ppm in Group 3. The Re concentrations of molybdenite in the Baishan Mo deposit decrease from early to late and from the center to periphery, and molybdenite types vary from the 2H1 poly‐type in Groups 1 and 2 to the 2H1 + 3R2H1 poly‐type in Group 3, based on X‐ray diffraction results. The Re‐enriched molybdenite probably formed from an oxidized magmatic fluid that separated from a highly oxidized and H2O‐ and volatile‐enriched adakitic intrusion generated in the lower crust.
{"title":"Genesis of Re‐rich Molybdenite in the Baishan Mo deposit, Eastern Tianshan, Xinjiang, Northwest China","authors":"Longxiang Ye, Dayu Zhang, Shiwei Wang, T. Zhou, F. Yuan, N. White, W. Xiao","doi":"10.1111/rge.12269","DOIUrl":"https://doi.org/10.1111/rge.12269","url":null,"abstract":"The Baishan molybdenum deposit is located in the central part of the Eastern Tianshan‐Beishan tectonic belt, NW China. The deposit is hosted in early Carboniferous Gandun Formation biotite‐rich hornfels and is genetically related to unexposed granodiorite porphyry beneath the orebodies. The molybdenite occurs in three different types from early to late stage: Molybdenite ‐ Fe‐Cu‐sulfides ‐ K‐feldspar ‐ quartz veins (Group 1); Molybdenite ‐ Fe‐Cu‐sulfides ‐ quartz veins (Group 2); and disseminated molybdenite in the wall rock (Group 3). Rhenium concentrations in the molybdenite grains range from 108 to 277 ppm in Group 1, 69–121 ppm in Group 2 and 46–135 ppm in Group 3. The Re concentrations of molybdenite in the Baishan Mo deposit decrease from early to late and from the center to periphery, and molybdenite types vary from the 2H1 poly‐type in Groups 1 and 2 to the 2H1 + 3R2H1 poly‐type in Group 3, based on X‐ray diffraction results. The Re‐enriched molybdenite probably formed from an oxidized magmatic fluid that separated from a highly oxidized and H2O‐ and volatile‐enriched adakitic intrusion generated in the lower crust.","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"20 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2021-10-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90686991","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The metal source of gold deposits in the Jiaoxibei area, eastern China, has been investigated by many researchers, but no consensus has been reached so far. In this study, three typical gold deposits, the Xinli, Jiaojia, and Dayingezhuang deposits, were selected for trace element analysis of gold and pyrite to constrain the metal source. Pyrite from these three deposits has similar morphological and compositional characteristics, and can be divided into three types: Py1 with euhedral to subhedral textures, Py2 with subhedral to anhedral textures with micro‐fractures, and Py3 with subhedral to anhedral textures and intergrowing polymetallic sulfides. Among them, Py2 and Py3 were formed in the main ore‐forming stage and they are the dominant host minerals of visible gold. In these deposits, visible gold occurs mainly in micro‐fractures or as inclusions in Py2 and Py3. Most of the pyrite has extremely low concentration of invisible gold, indicating that visible gold in the Jiaoxibei district is not a product of the remobilization of invisible gold from earlier pyrite. Both Py2 and Py3 are characterized by low Co concentration of <100 ppm and Co/Ni ratio of <1, which are similar to those of pyrite in sedimentary rocks. Therefore, ore‐forming metals of these gold deposits in the Jiaoxibei district may originate mainly from a sediment‐related metal source.
{"title":"Metal source of gold deposits in the Jiaoxibei area, Eastern China: Insights from trace element analysis of gold and pyrite","authors":"Jilong Lu, Yuchao Fan, Yechang Yin, Yuxin Xiong, Jinke Guo, Wu Tian, Xinyun Zhao","doi":"10.1111/rge.12278","DOIUrl":"https://doi.org/10.1111/rge.12278","url":null,"abstract":"The metal source of gold deposits in the Jiaoxibei area, eastern China, has been investigated by many researchers, but no consensus has been reached so far. In this study, three typical gold deposits, the Xinli, Jiaojia, and Dayingezhuang deposits, were selected for trace element analysis of gold and pyrite to constrain the metal source. Pyrite from these three deposits has similar morphological and compositional characteristics, and can be divided into three types: Py1 with euhedral to subhedral textures, Py2 with subhedral to anhedral textures with micro‐fractures, and Py3 with subhedral to anhedral textures and intergrowing polymetallic sulfides. Among them, Py2 and Py3 were formed in the main ore‐forming stage and they are the dominant host minerals of visible gold. In these deposits, visible gold occurs mainly in micro‐fractures or as inclusions in Py2 and Py3. Most of the pyrite has extremely low concentration of invisible gold, indicating that visible gold in the Jiaoxibei district is not a product of the remobilization of invisible gold from earlier pyrite. Both Py2 and Py3 are characterized by low Co concentration of <100 ppm and Co/Ni ratio of <1, which are similar to those of pyrite in sedimentary rocks. Therefore, ore‐forming metals of these gold deposits in the Jiaoxibei district may originate mainly from a sediment‐related metal source.","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"17 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2021-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73662092","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Interpretation of various exploration data, in particular geochemical prospecting, offers a powerful and rapid assessment of grass‐root projects in a green‐field terrain. Here, we present an example of the Collins epithermal prospect in Aceh Province, Indonesia. In this area, the Au+ base‐metal‐bearing sheeted quartz veins (individually mostly 2–4 cm wide), which are controlled by a 250 m wide by 800 m long NNE‐trending structural corridor within Paleogene sandstone and volcanic rocks, are the product of two main stages of deposition. Stage I formed veins with a sliver of cryptocrystalline quartz wall zone followed by an inner zone of comb quartz with interstitial rhombic adularia that terminates in open space. Stage I or main‐stage sulfide mineralization consisting of early galena + sphalerite and later chalcopyrite occurs with the quartz + adularia. Small amounts of galena also occur in the wall zone. Stage II mineralization brecciated Stage I veins and overprinted them with silicification characterized by vuggy texture. Mineralization associated with this episode consists of earlier chalcopyrite + sphalerite + tennantite–tetrahedrite and later, vug‐filling Au–Ag alloy (Ag0.37–0.41Au0.62–0.59). The above mineralized veins are successively flanked by silicic selvages, an illite + chlorite + pyrite ± kaolinite zone and a chlorite + epidote + carbonate + pyrite zone. Local supergene alteration induced replacement of galena by plumbogummite and anglesite and chalcopyrite by covellite. Data from fluid inclusion microthermometry in quartz indicated that the inner zone of Stage I veins formed from fluids with a 2.3 wt% salinity (0.5–3.3 wt% NaCl equivalent), at 174°C (155–211°C). Combining these physico‐chemical parameters with the mineral assemblage, the mineralization occurred under a reduced environment. Rock and soil assays indicate that elevated Au concentrations (up to 16.5 ppm over 1 m) occur along northeast‐trending zones and show a strong correlation with Pb, while Cu (up to 2.58% over 1 m), Zn, As, Sb, and Mo anomalies lie mostly at the periphery. The high‐grade mineralized veins correlate with moderate to high resistivity and chargeability zones, and the pseudosections of such geophysical signals are interpreted as reflecting coalesced or enlarged veins at depth, or inclined veins in other localities. The intermediate sulfidation affinity for Collins points to potential mineralization at depth as well as preservation of Au‐rich and sulfide‐poor zones in the less eroded areas.
{"title":"Initial exploration results of the Collins epithermal Au‐base metal prospect, Aceh, Indonesia","authors":"Thomas Mulja, S. Ebert, L. Groat","doi":"10.1111/rge.12277","DOIUrl":"https://doi.org/10.1111/rge.12277","url":null,"abstract":"Interpretation of various exploration data, in particular geochemical prospecting, offers a powerful and rapid assessment of grass‐root projects in a green‐field terrain. Here, we present an example of the Collins epithermal prospect in Aceh Province, Indonesia. In this area, the Au+ base‐metal‐bearing sheeted quartz veins (individually mostly 2–4 cm wide), which are controlled by a 250 m wide by 800 m long NNE‐trending structural corridor within Paleogene sandstone and volcanic rocks, are the product of two main stages of deposition. Stage I formed veins with a sliver of cryptocrystalline quartz wall zone followed by an inner zone of comb quartz with interstitial rhombic adularia that terminates in open space. Stage I or main‐stage sulfide mineralization consisting of early galena + sphalerite and later chalcopyrite occurs with the quartz + adularia. Small amounts of galena also occur in the wall zone. Stage II mineralization brecciated Stage I veins and overprinted them with silicification characterized by vuggy texture. Mineralization associated with this episode consists of earlier chalcopyrite + sphalerite + tennantite–tetrahedrite and later, vug‐filling Au–Ag alloy (Ag0.37–0.41Au0.62–0.59). The above mineralized veins are successively flanked by silicic selvages, an illite + chlorite + pyrite ± kaolinite zone and a chlorite + epidote + carbonate + pyrite zone. Local supergene alteration induced replacement of galena by plumbogummite and anglesite and chalcopyrite by covellite. Data from fluid inclusion microthermometry in quartz indicated that the inner zone of Stage I veins formed from fluids with a 2.3 wt% salinity (0.5–3.3 wt% NaCl equivalent), at 174°C (155–211°C). Combining these physico‐chemical parameters with the mineral assemblage, the mineralization occurred under a reduced environment. Rock and soil assays indicate that elevated Au concentrations (up to 16.5 ppm over 1 m) occur along northeast‐trending zones and show a strong correlation with Pb, while Cu (up to 2.58% over 1 m), Zn, As, Sb, and Mo anomalies lie mostly at the periphery. The high‐grade mineralized veins correlate with moderate to high resistivity and chargeability zones, and the pseudosections of such geophysical signals are interpreted as reflecting coalesced or enlarged veins at depth, or inclined veins in other localities. The intermediate sulfidation affinity for Collins points to potential mineralization at depth as well as preservation of Au‐rich and sulfide‐poor zones in the less eroded areas.","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"19 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2021-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91199990","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Zhe-heng Zhou, K. Yonezu, A. Imai, T. Tindell, Huan Li, J. Gabo‐Ratio
The Woxi Au‐Sb‐W deposit is one of the largest polymetallic ore deposits in the Xuefengshan Range, southern China, hosted in low‐grade metamorphosed Neoproterozoic volcaniclastic rocks. The orebodies of the deposit are predominantly composed of banded quartz veins, which are strictly controlled by bedding and faults. Petrographic observations and geochemical results are reported on the occurrence of Au and properties of the ore‐forming processes for different stages in the deposit. The veins extend vertically up to 2 km without obvious vertical metal zoning. The ore‐forming process can be subdivided into four mineralization stages: Pre‐ore stage; Early stage (scheelite‐quartz stage); Middle stage (pyrite‐stibnite‐quartz stage); and Late stage (stibnite‐quartz sage). Four types of pyrite (Py0, Py1, Py2, and Py3) were identified in the ores and host‐rock: Py0 occurs as euhedral grains with voids in the core, ranging in size from 50 to 100 μm and formed mainly in the Pre‐ore stage and Early stage; Py1 occurs as subhedral grains. Small grains (around 10 μm) of Py1 form irregularly shaped clusters of variable size ranging from tens to hundreds of μm and mainly formed in the Middle stage; Euhedral‐subhedral fine‐grained Py2 formed in the Late stage; Minor subhedral fine‐grained Py3 was deposited in the Late‐stage. Stibnite is widely distributed in the Middle and Late stage ore veins. No systemic difference was recognized in mineralogical features among stibnite formed in different stages. In addition to native gold, the lattice bound Au+1 widely exists in Py1 and Py2 in the deposit, and widespread Py1 is considered as the main Au‐bearing mineral with the highest Au contents. Most elements (such as Co, Ni, Cu, As, Sb, Ba, and Pb) are considered to occur as solid solution within the crystal lattice and/or invisible nanoparticles in sulfides minerals. The Co/Ni ratio of most pyrite is lower than 1, suggesting that the metals in the ore‐forming fluid are sourced from sedimentary rocks. The coupled behavior between Au and As; Au and Sb suggests that the substitution of As and Sb in pyrite can enhance the incorporation of Au. Variation of trace elements in pyrites of different stages suggests some information on the mineralization processes: Large ion lithophile elements (such as Ba and Pb) are enriched in Py0 indicating that water‐rock reaction occurred in the Early stage; Fine‐grained Py1 with a heterogeneous distribution of elements suggests fast crystallization of pyrite in the Middle stage.
{"title":"Trace elements mineral chemistry of sulfides from the Woxi Au‐Sb‐W deposit, southern China","authors":"Zhe-heng Zhou, K. Yonezu, A. Imai, T. Tindell, Huan Li, J. Gabo‐Ratio","doi":"10.1111/rge.12279","DOIUrl":"https://doi.org/10.1111/rge.12279","url":null,"abstract":"The Woxi Au‐Sb‐W deposit is one of the largest polymetallic ore deposits in the Xuefengshan Range, southern China, hosted in low‐grade metamorphosed Neoproterozoic volcaniclastic rocks. The orebodies of the deposit are predominantly composed of banded quartz veins, which are strictly controlled by bedding and faults. Petrographic observations and geochemical results are reported on the occurrence of Au and properties of the ore‐forming processes for different stages in the deposit. The veins extend vertically up to 2 km without obvious vertical metal zoning. The ore‐forming process can be subdivided into four mineralization stages: Pre‐ore stage; Early stage (scheelite‐quartz stage); Middle stage (pyrite‐stibnite‐quartz stage); and Late stage (stibnite‐quartz sage). Four types of pyrite (Py0, Py1, Py2, and Py3) were identified in the ores and host‐rock: Py0 occurs as euhedral grains with voids in the core, ranging in size from 50 to 100 μm and formed mainly in the Pre‐ore stage and Early stage; Py1 occurs as subhedral grains. Small grains (around 10 μm) of Py1 form irregularly shaped clusters of variable size ranging from tens to hundreds of μm and mainly formed in the Middle stage; Euhedral‐subhedral fine‐grained Py2 formed in the Late stage; Minor subhedral fine‐grained Py3 was deposited in the Late‐stage. Stibnite is widely distributed in the Middle and Late stage ore veins. No systemic difference was recognized in mineralogical features among stibnite formed in different stages. In addition to native gold, the lattice bound Au+1 widely exists in Py1 and Py2 in the deposit, and widespread Py1 is considered as the main Au‐bearing mineral with the highest Au contents. Most elements (such as Co, Ni, Cu, As, Sb, Ba, and Pb) are considered to occur as solid solution within the crystal lattice and/or invisible nanoparticles in sulfides minerals. The Co/Ni ratio of most pyrite is lower than 1, suggesting that the metals in the ore‐forming fluid are sourced from sedimentary rocks. The coupled behavior between Au and As; Au and Sb suggests that the substitution of As and Sb in pyrite can enhance the incorporation of Au. Variation of trace elements in pyrites of different stages suggests some information on the mineralization processes: Large ion lithophile elements (such as Ba and Pb) are enriched in Py0 indicating that water‐rock reaction occurred in the Early stage; Fine‐grained Py1 with a heterogeneous distribution of elements suggests fast crystallization of pyrite in the Middle stage.","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"6 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2021-09-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85200649","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In this review, we introduce the geology and mineralization of the northern part of the Korean Peninsula based on recently published data in North Korea. Geological characteristics and events are described in order of geological period and the representative mineral deposits are presented according to the geologic period to show the relationship between the geology and mineralization. In particular, we rearrange the stratigraphy of the Precambrian basement and reset the timing of intrusion and mineralization based mainly on the reported zircon U–Pb age data. The Precambrian geotectonic provinces of North Korea contain continental cores and massifs, active continental margins, and rift zones. The Precambrian strata between the eastern North China Craton (NCC) and North Korea are newly correlated considering rearranged stratigraphy in this review. The Precambrian strata of North Korea are characterized by the depletion of the Paleoproterozoic to Mesoproterozoic strata compared to the NCC from 1.8 to 1.5 Ga. It may indicate that the northern part of the Korean Peninsula was the passive continental margin environment during this period. The common occurrences of bimodal igneous suites (mafic‐felsic and alkaline‐subalkaline) are also characteristic of North Korea. The bimodal magmatism is well explained by the progressive tectonic evolution from oceanic crust‐continent subduction (2.0–2.2 Ga) and island arc–continent collision (~1.9 Ga) to post collisional extension (1.82–1.87 Ga) in the NCC including North Korea. The Precambrian geological similarities between Northeastern China and North Korea would have resulted in the same or similar mineralization. For example, Algoma type banded iron formations of the Fe deposits of the Anshan–Benxi area in China and Musan Fe deposit in North Korea were formed during the Neoarchean and Paleoproterozoic. Sedimentary exhalative type Pb–Zn and metasedimentary type magnesite deposits were formed within the Jiao‐Liao‐Ji belt extending from the Liaoning Rift Zone of China (Pb–Zn deposits in the Qingchenzi orefield and magnesite deposits in Dashiqiao magnesite belt) to the Macheollyeong Rift Zone of North Korea (Geomdeok Pb–Zn deposit and Daeheung–Ryongyang magnesite deposits) during Paleoproterozoic. The geotectonic, geological and metallogenic similarities between Northeastern China and North Korea indicate that the Precambrian continental massifs of North Korea might be evolved in accordance with the NCC evolution. This review is expected to be helpful for understanding the geotectonics, geology, and related mineralization of the northern part of Korean Peninsula and correlating with those of the NCC.
{"title":"Review on geology and mineralization of North Korea (I: Precambrian)","authors":"B. Lee, S. Koh, N. Kim, Byoung‐Woon You","doi":"10.1111/rge.12275","DOIUrl":"https://doi.org/10.1111/rge.12275","url":null,"abstract":"In this review, we introduce the geology and mineralization of the northern part of the Korean Peninsula based on recently published data in North Korea. Geological characteristics and events are described in order of geological period and the representative mineral deposits are presented according to the geologic period to show the relationship between the geology and mineralization. In particular, we rearrange the stratigraphy of the Precambrian basement and reset the timing of intrusion and mineralization based mainly on the reported zircon U–Pb age data. The Precambrian geotectonic provinces of North Korea contain continental cores and massifs, active continental margins, and rift zones. The Precambrian strata between the eastern North China Craton (NCC) and North Korea are newly correlated considering rearranged stratigraphy in this review. The Precambrian strata of North Korea are characterized by the depletion of the Paleoproterozoic to Mesoproterozoic strata compared to the NCC from 1.8 to 1.5 Ga. It may indicate that the northern part of the Korean Peninsula was the passive continental margin environment during this period. The common occurrences of bimodal igneous suites (mafic‐felsic and alkaline‐subalkaline) are also characteristic of North Korea. The bimodal magmatism is well explained by the progressive tectonic evolution from oceanic crust‐continent subduction (2.0–2.2 Ga) and island arc–continent collision (~1.9 Ga) to post collisional extension (1.82–1.87 Ga) in the NCC including North Korea. The Precambrian geological similarities between Northeastern China and North Korea would have resulted in the same or similar mineralization. For example, Algoma type banded iron formations of the Fe deposits of the Anshan–Benxi area in China and Musan Fe deposit in North Korea were formed during the Neoarchean and Paleoproterozoic. Sedimentary exhalative type Pb–Zn and metasedimentary type magnesite deposits were formed within the Jiao‐Liao‐Ji belt extending from the Liaoning Rift Zone of China (Pb–Zn deposits in the Qingchenzi orefield and magnesite deposits in Dashiqiao magnesite belt) to the Macheollyeong Rift Zone of North Korea (Geomdeok Pb–Zn deposit and Daeheung–Ryongyang magnesite deposits) during Paleoproterozoic. The geotectonic, geological and metallogenic similarities between Northeastern China and North Korea indicate that the Precambrian continental massifs of North Korea might be evolved in accordance with the NCC evolution. This review is expected to be helpful for understanding the geotectonics, geology, and related mineralization of the northern part of Korean Peninsula and correlating with those of the NCC.","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"31 1","pages":"492 - 513"},"PeriodicalIF":1.4,"publicationDate":"2021-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87678313","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Veeravinantanakul, R. Takahashi, A. Agangi, T. Ohba, Yasushi Watanabe, M. Elburg, H. Ueckermann, P. Kanjanapayont, P. Charusiri
The effects of the Sibumasu–Indochina Terranes collision created several kinds of mineral deposits in Thailand, which include porphyry–skarn copper–gold, epithermal gold and antimony, orogenic gold–antimony–tungsten and tin‐tungsten mineralization among others. The deposits show a distinct spatial zonal distribution and occur in specific tectonic terranes. Combining regional geological data and ore deposit distribution data with Hf‐isotopic data of zircons in igneous rocks can be used to investigate the relationship between crustal construction processes and metallogeny. In this study, we investigated the Sukhothai Fold Belt, which is composed of quartz monzodiorite, granodiorite, syenogranite, and monzogranite of I‐ and S‐type affinities. All granitoids were analyzed for zircon U–Pb geochronology and Lu–Hf isotopic analysis. The granitoids of the Sukhothai Fold Belt yielded U–Pb zircon ages ranging from ~243 to 202 Ma, which mark the timing of subduction to the syn‐collisional stage between the Sibumasu–Indochina terranes at ~243–237 Ma and the timing of post‐collision between the Sibumasu–Indochina terranes during 230–202 Ma. In addition, an age of ~43 Ma in the south of the Sukhothai Fold Belt may indicate intrusion during the sinistral movement of the Klaeng and Mae Ping fault zones resulted from the Indian–Eurasian plate collision. The Doi Tung quartz monzodiorite provided an age of ~350 Ma as a timing of formation of the Sukhothai Fold Belt. The negative and positive initial εHf values (−8.0 to +9.2) with two‐stage depleted mantle model ages (TDMC of 2.2–0.6 Ga) of zircons from the Sukhothai Fold Belt granitoids indicate that the sources of their magma derived from partial melting of old continental crust and young oceanic crust, which probably mixed with a mantle‐derived magma. A zircon Hf‐isotope compilation including the data obtained in this study and previously reported values was used to prepare a map that allows a comparison between magmatic source and mineral deposit distribution in Thailand. The spatial distribution of Hf isotopic data reveals a distinct zonation, with initial εHf values decreasing from the east to the west, that is, from the western margin of the Indochina Terrane or the Loei Fold Belt to the Sukhothai Fold Belt, the Inthanon Zone and the Sibumasu Terrane. The magmatic source for the granitoids in the Loei Fold Belt is dominated by mantle‐derived components, as shown by positive average initial εHf values (+1.0 to +12.7), and contributed to porphyry‐related skarn copper–gold and iron and epithermal gold mineralization. In contrast, magmas in the Sibumasu Terrane and the Inthanon Zone originated from melting of old crustal materials, as indicated by mostly negative average initial εHf values (−15.1 to +0.8), and are responsible for S‐type granite‐related tin‐tungsten mineralization. The average initial εHf values (−5.0 to +11.0) from the intrusions in the Sukhothai Fold Belt suggest mixed sources, including evolved
{"title":"Zircon Hf‐isotope constraints on the formation of metallic mineral deposits in Thailand","authors":"A. Veeravinantanakul, R. Takahashi, A. Agangi, T. Ohba, Yasushi Watanabe, M. Elburg, H. Ueckermann, P. Kanjanapayont, P. Charusiri","doi":"10.1111/rge.12276","DOIUrl":"https://doi.org/10.1111/rge.12276","url":null,"abstract":"The effects of the Sibumasu–Indochina Terranes collision created several kinds of mineral deposits in Thailand, which include porphyry–skarn copper–gold, epithermal gold and antimony, orogenic gold–antimony–tungsten and tin‐tungsten mineralization among others. The deposits show a distinct spatial zonal distribution and occur in specific tectonic terranes. Combining regional geological data and ore deposit distribution data with Hf‐isotopic data of zircons in igneous rocks can be used to investigate the relationship between crustal construction processes and metallogeny. In this study, we investigated the Sukhothai Fold Belt, which is composed of quartz monzodiorite, granodiorite, syenogranite, and monzogranite of I‐ and S‐type affinities. All granitoids were analyzed for zircon U–Pb geochronology and Lu–Hf isotopic analysis. The granitoids of the Sukhothai Fold Belt yielded U–Pb zircon ages ranging from ~243 to 202 Ma, which mark the timing of subduction to the syn‐collisional stage between the Sibumasu–Indochina terranes at ~243–237 Ma and the timing of post‐collision between the Sibumasu–Indochina terranes during 230–202 Ma. In addition, an age of ~43 Ma in the south of the Sukhothai Fold Belt may indicate intrusion during the sinistral movement of the Klaeng and Mae Ping fault zones resulted from the Indian–Eurasian plate collision. The Doi Tung quartz monzodiorite provided an age of ~350 Ma as a timing of formation of the Sukhothai Fold Belt. The negative and positive initial εHf values (−8.0 to +9.2) with two‐stage depleted mantle model ages (TDMC of 2.2–0.6 Ga) of zircons from the Sukhothai Fold Belt granitoids indicate that the sources of their magma derived from partial melting of old continental crust and young oceanic crust, which probably mixed with a mantle‐derived magma. A zircon Hf‐isotope compilation including the data obtained in this study and previously reported values was used to prepare a map that allows a comparison between magmatic source and mineral deposit distribution in Thailand. The spatial distribution of Hf isotopic data reveals a distinct zonation, with initial εHf values decreasing from the east to the west, that is, from the western margin of the Indochina Terrane or the Loei Fold Belt to the Sukhothai Fold Belt, the Inthanon Zone and the Sibumasu Terrane. The magmatic source for the granitoids in the Loei Fold Belt is dominated by mantle‐derived components, as shown by positive average initial εHf values (+1.0 to +12.7), and contributed to porphyry‐related skarn copper–gold and iron and epithermal gold mineralization. In contrast, magmas in the Sibumasu Terrane and the Inthanon Zone originated from melting of old crustal materials, as indicated by mostly negative average initial εHf values (−15.1 to +0.8), and are responsible for S‐type granite‐related tin‐tungsten mineralization. The average initial εHf values (−5.0 to +11.0) from the intrusions in the Sukhothai Fold Belt suggest mixed sources, including evolved","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"36 1","pages":"436 - 469"},"PeriodicalIF":1.4,"publicationDate":"2021-07-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90850145","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Creszyl Joy J. Arellano, L. Armada, C. Dimalanta, K. Queaño, E. Andal, G. Yumul
Ground magnetic surveys conducted in Suyoc, Mankayan, Benguet led to the delineation of features related to epithermal and porphyry copper targets in the area. High reduced to equator (RTE) anomalies are observed in areas with epithermal mineralization. The high RTE anomalies are attributed to hydrothermally altered rock with quartz veins. The previously recognized porphyry copper prospect in Palasaan (Mohong Hill) is characterized by low RTE anomaly surrounded by a high RTE anomaly. One explanation for this signature is the possible presence of a magnetic core and the destruction or absence of magnetite in the alteration haloes at the periphery of a porphyry prospect. Areas such as Mangga and Liten exhibit the same magnetic signatures. This distinct magnetic pattern coupled with observed alteration and mineralization signatures led to the interpretation of prospective blind porphyry deposits in these localities. Results of the study reveal the applicability of ground magnetic data in characterizing and extracting a potential area of mineralized zones at a regional scale.
{"title":"Interpretation of ground magnetic data in Suyoc, Mankayan Mineral District, Philippines","authors":"Creszyl Joy J. Arellano, L. Armada, C. Dimalanta, K. Queaño, E. Andal, G. Yumul","doi":"10.1111/rge.12270","DOIUrl":"https://doi.org/10.1111/rge.12270","url":null,"abstract":"Ground magnetic surveys conducted in Suyoc, Mankayan, Benguet led to the delineation of features related to epithermal and porphyry copper targets in the area. High reduced to equator (RTE) anomalies are observed in areas with epithermal mineralization. The high RTE anomalies are attributed to hydrothermally altered rock with quartz veins. The previously recognized porphyry copper prospect in Palasaan (Mohong Hill) is characterized by low RTE anomaly surrounded by a high RTE anomaly. One explanation for this signature is the possible presence of a magnetic core and the destruction or absence of magnetite in the alteration haloes at the periphery of a porphyry prospect. Areas such as Mangga and Liten exhibit the same magnetic signatures. This distinct magnetic pattern coupled with observed alteration and mineralization signatures led to the interpretation of prospective blind porphyry deposits in these localities. Results of the study reveal the applicability of ground magnetic data in characterizing and extracting a potential area of mineralized zones at a regional scale.","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"153 1","pages":"363 - 376"},"PeriodicalIF":1.4,"publicationDate":"2021-07-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85395808","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Target H is a new Cu prospect discovered in the Mumbwa district of central Zambia. Copper mineralization in the Mumbwa district is linked to the hydrothermal system associated with the granite‐quartz syenite intrusions of the Hook batholith. The extent of the hydrothermal system has not been documented, but various Cu prospects, including Target H, have been discovered at the margins of the granite‐quartz syenite bodies. The objective of this study is to investigate the geological characteristics of the Target H prospect using petrographic, geochemical, and sulfur isotope data in order to understand the features of mineralization at the margin of the hydrothermal system. The Cu‐ and Co‐rich orebodies are hosted in siltstone and breccia correlated to the Kundelungu Group of the Neoproterozoic Katanga Supergroup rocks. The siltstone consists of alternating beds of sandstone and mudstone that are composed of diagenetic quartz, albite, dolomite, calcite, and muscovite. Breccia occurs parallel to the bedding planes and in the folded and fractured siltstone units. Lithostratigraphy is characterized by three domains: breccia, transition, and host rock, which are defined depending on the proportion of siltstone and breccia. The diagenetic minerals have been modified by hydrothermal alteration, resulting in alteration products controlled by the primary mineralogy of the host rocks: K‐feldspar and muscovite replace albite and muscovite in siltstone, while siderite and hematite replace dolomite and calcite in breccia. Hydrothermal calcite is observed in the veinlets with or without siderite and hematite. Copper mineralization is associated with hydrothermal alteration and occurs as chalcopyrite, bornite, and chalcocite in breccia and stockwork veins. Diagrams correlating geochemistry to lithology show that the bulk of Cu mineralization is hosted in the breccia. An anomalous concentration of Co occurs with Cu in breccia, but the two metals do not show similar enrichment and depletion behaviors. The Cu‐rich orebody forms in hematite‐dominated breccia domain, whereas Co‐rich orebody forms in siderite‐dominated breccia units in the transition domain. In addition to Cu and Co, geochemical data show significant enrichment of Fe, P, Ba, Mo, Pb, W, U, V, and light rare earth elements in the breccia. Sulfur isotopic values of sulfide minerals show lighter δ34S values between 5 and 9‰ in the breccia and heavy δ34S signatures of approximately 17–28‰ in the siltstone. The δ34S values measured from sulfides in the breccia were comparable to the values obtained from the Kitumba deposit, which is located at the center of the hydrothermal system. We propose a magmatic‐hydrothermal origin for the Cu‐ and Co‐rich orebodies in the breccia at Target H. Breccia was the conduit for iron‐oxide‐rich metal‐bearing fluids that originated from the Kitumba deposit. Cooling and reaction of the fluids with dolomite‐rich siltstone triggered a redox reaction that deposited Cu sulfide mine
{"title":"Hydrothermal alteration and Cu–Co mineralization at the peripheral zone (Target H) of the Kitumba iron–oxide copper–gold system, Mumbwa District, Zambia","authors":"M. Simusokwe, Yasushi Watanabe, T. Echigo","doi":"10.1111/rge.12274","DOIUrl":"https://doi.org/10.1111/rge.12274","url":null,"abstract":"Target H is a new Cu prospect discovered in the Mumbwa district of central Zambia. Copper mineralization in the Mumbwa district is linked to the hydrothermal system associated with the granite‐quartz syenite intrusions of the Hook batholith. The extent of the hydrothermal system has not been documented, but various Cu prospects, including Target H, have been discovered at the margins of the granite‐quartz syenite bodies. The objective of this study is to investigate the geological characteristics of the Target H prospect using petrographic, geochemical, and sulfur isotope data in order to understand the features of mineralization at the margin of the hydrothermal system. The Cu‐ and Co‐rich orebodies are hosted in siltstone and breccia correlated to the Kundelungu Group of the Neoproterozoic Katanga Supergroup rocks. The siltstone consists of alternating beds of sandstone and mudstone that are composed of diagenetic quartz, albite, dolomite, calcite, and muscovite. Breccia occurs parallel to the bedding planes and in the folded and fractured siltstone units. Lithostratigraphy is characterized by three domains: breccia, transition, and host rock, which are defined depending on the proportion of siltstone and breccia. The diagenetic minerals have been modified by hydrothermal alteration, resulting in alteration products controlled by the primary mineralogy of the host rocks: K‐feldspar and muscovite replace albite and muscovite in siltstone, while siderite and hematite replace dolomite and calcite in breccia. Hydrothermal calcite is observed in the veinlets with or without siderite and hematite. Copper mineralization is associated with hydrothermal alteration and occurs as chalcopyrite, bornite, and chalcocite in breccia and stockwork veins. Diagrams correlating geochemistry to lithology show that the bulk of Cu mineralization is hosted in the breccia. An anomalous concentration of Co occurs with Cu in breccia, but the two metals do not show similar enrichment and depletion behaviors. The Cu‐rich orebody forms in hematite‐dominated breccia domain, whereas Co‐rich orebody forms in siderite‐dominated breccia units in the transition domain. In addition to Cu and Co, geochemical data show significant enrichment of Fe, P, Ba, Mo, Pb, W, U, V, and light rare earth elements in the breccia. Sulfur isotopic values of sulfide minerals show lighter δ34S values between 5 and 9‰ in the breccia and heavy δ34S signatures of approximately 17–28‰ in the siltstone. The δ34S values measured from sulfides in the breccia were comparable to the values obtained from the Kitumba deposit, which is located at the center of the hydrothermal system. We propose a magmatic‐hydrothermal origin for the Cu‐ and Co‐rich orebodies in the breccia at Target H. Breccia was the conduit for iron‐oxide‐rich metal‐bearing fluids that originated from the Kitumba deposit. Cooling and reaction of the fluids with dolomite‐rich siltstone triggered a redox reaction that deposited Cu sulfide mine","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"69 1","pages":"409 - 435"},"PeriodicalIF":1.4,"publicationDate":"2021-07-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85709343","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The Dizon Au‐rich porphyry Cu deposit, 0.67 Mt Cu and 174 t Au, is hosted by diorite and andesite porphyry intrusions, dated at ~2.5 Ma. Amphibole and Fe‐Ti oxides in relatively unaltered rocks were used to evaluate the magma conditions of intrusions. Parental magma for diorite porphyry was ~950°C at a depth of ~15 km, whereas the parental magmas for the andesite porphyry had lower temperatures, 760–820°C at a depth of ~5 km. The deposit formed at the locus of multiple intrusions, with evidence for injections of hot mafic magmas, including destabilization texture of plagioclase phenocrysts. Parental magmas at Dizon were oxidized, above FMQ + 2.0, and water‐rich, >5 wt%, comparable to conditions of many large porphyry deposits elsewhere in the world. The occurrence of thick opacitic bands of amphibole in the diorite porphyry at Dizon reflects the release of aqueous fluids from the magma; such magmatic fluids were likely responsible for magmatic hydrothermal mineralization of the Dizon porphyry deposit. Subduction of the Scarborough Seamount caused a compressive regime in the overlying plate, which likely contributed to favourable tectonic conditions for mineralization.
{"title":"Igneous rocks related to porphyry Cu‐Au mineralization at the Dizon mine, Philippines","authors":"William P. Midea, K. Hattori, G. Valera","doi":"10.1111/rge.12273","DOIUrl":"https://doi.org/10.1111/rge.12273","url":null,"abstract":"The Dizon Au‐rich porphyry Cu deposit, 0.67 Mt Cu and 174 t Au, is hosted by diorite and andesite porphyry intrusions, dated at ~2.5 Ma. Amphibole and Fe‐Ti oxides in relatively unaltered rocks were used to evaluate the magma conditions of intrusions. Parental magma for diorite porphyry was ~950°C at a depth of ~15 km, whereas the parental magmas for the andesite porphyry had lower temperatures, 760–820°C at a depth of ~5 km. The deposit formed at the locus of multiple intrusions, with evidence for injections of hot mafic magmas, including destabilization texture of plagioclase phenocrysts. Parental magmas at Dizon were oxidized, above FMQ + 2.0, and water‐rich, >5 wt%, comparable to conditions of many large porphyry deposits elsewhere in the world. The occurrence of thick opacitic bands of amphibole in the diorite porphyry at Dizon reflects the release of aqueous fluids from the magma; such magmatic fluids were likely responsible for magmatic hydrothermal mineralization of the Dizon porphyry deposit. Subduction of the Scarborough Seamount caused a compressive regime in the overlying plate, which likely contributed to favourable tectonic conditions for mineralization.","PeriodicalId":21089,"journal":{"name":"Resource Geology","volume":"15 1","pages":"392 - 408"},"PeriodicalIF":1.4,"publicationDate":"2021-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79250177","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：