Cracks in concrete or cement based materials present a great threat to any civil structures; they are very dangerous and have caused a lot of destruction and damage. Even small cracks that look insignificant can grow and may eventually lead to severe structural failure. Besides manual inspection that is ineffective and time-consuming, several nondestructive evaluation techniques have been used for crack detection such as ultrasonic technique, vibration technique, and strain-based technique; however, some of the sensors used are either too large in size or limited in resolution. A high resolution microwave imaging technique with ultrawideband signal for crack detection in concrete structures is proposed. A combination of the delay-and-sum beamformer with full-view mounted antennas constitutes the image reconstruction algorithm. Various anomaly scenarios in cement bricks were simulated using FDTD, constructed, and measured in the lab. The reconstructed images showed a high similarity between the simulation and the experiment with a resolution of which enables a detection of cracks as small as 5 mm in size.
{"title":"Detection of Cracks in Concrete Structure Using Microwave Imaging Technique","authors":"E. A. Jiya, N. S. N. Anwar, M. Abdullah","doi":"10.1155/2016/3195716","DOIUrl":"https://doi.org/10.1155/2016/3195716","url":null,"abstract":"Cracks in concrete or cement based materials present a great threat to any civil structures; they are very dangerous and have caused a lot of destruction and damage. Even small cracks that look insignificant can grow and may eventually lead to severe structural failure. Besides manual inspection that is ineffective and time-consuming, several nondestructive evaluation techniques have been used for crack detection such as ultrasonic technique, vibration technique, and strain-based technique; however, some of the sensors used are either too large in size or limited in resolution. A high resolution microwave imaging technique with ultrawideband signal for crack detection in concrete structures is proposed. A combination of the delay-and-sum beamformer with full-view mounted antennas constitutes the image reconstruction algorithm. Various anomaly scenarios in cement bricks were simulated using FDTD, constructed, and measured in the lab. The reconstructed images showed a high similarity between the simulation and the experiment with a resolution of which enables a detection of cracks as small as 5 mm in size.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125695101","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A single-port uniplanar antenna with a built-in tunable filter is presented for operation in multiple LTE bands for cognitive femtocell applications. The antenna is based on a monopole microstrip patch fed by coplanar waveguide. The frequency reconfigurability is achieved by using two PIN diodes to couple or decouple a ring slot resonator filter from the antenna feed line. By switching the PIN diodes, the proposed design can operate in either wideband or narrowband modes. When the antenna operates in the narrowband state, two varactor diodes are used to continuously tune the narrowband frequency from 2.55 to 3.2 GHz, while the wideband state is obtained over the 1.35–6.2 GHz band. The diodes and their biasing networks have nearly no severe effect on the antenna characteristics. Prototypes of the proposed structure using ideal and real switches, with and without varactors, are fabricated and tested. Measured and simulated results are in good agreement, thus verifying the good performance of the proposed design. The obtained results show that the proposed antenna is very suitable for cognitive radio applications, in which the wideband mode is used for spectrum sensing and the narrowband mode for transmission at different frequency bands.
{"title":"Reconfigurable and Tunable Filtenna for Cognitive LTE Femtocell Base Stations","authors":"Hamza Nachouane, A. Najid, A. Tribak, F. Riouch","doi":"10.1155/2016/9460823","DOIUrl":"https://doi.org/10.1155/2016/9460823","url":null,"abstract":"A single-port uniplanar antenna with a built-in tunable filter is presented for operation in multiple LTE bands for cognitive femtocell applications. The antenna is based on a monopole microstrip patch fed by coplanar waveguide. The frequency reconfigurability is achieved by using two PIN diodes to couple or decouple a ring slot resonator filter from the antenna feed line. By switching the PIN diodes, the proposed design can operate in either wideband or narrowband modes. When the antenna operates in the narrowband state, two varactor diodes are used to continuously tune the narrowband frequency from 2.55 to 3.2 GHz, while the wideband state is obtained over the 1.35–6.2 GHz band. The diodes and their biasing networks have nearly no severe effect on the antenna characteristics. Prototypes of the proposed structure using ideal and real switches, with and without varactors, are fabricated and tested. Measured and simulated results are in good agreement, thus verifying the good performance of the proposed design. The obtained results show that the proposed antenna is very suitable for cognitive radio applications, in which the wideband mode is used for spectrum sensing and the narrowband mode for transmission at different frequency bands.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"68 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129997971","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A frequency agile antenna is proposed with its ground plane having a semicircular shaped slot which is capable of switching the frequency to different bands, one at a time, in the wide frequency range of 5.33 GHz to 9.90 GHz. To achieve frequency agility, switching of six RF PIN diodes which are placed along the slot length is done in various combinations. Frequency tuning ratio of about 1.85 : 1 can be achieved using this design. Results such as return losses, gain, bandwidth, and radiation patterns are presented in this paper.
{"title":"A Frequency Agile Semicircular Slot Antenna For Cognitive Radio System","authors":"Rajeev Kumar, R. Vijay","doi":"10.1155/2016/2648248","DOIUrl":"https://doi.org/10.1155/2016/2648248","url":null,"abstract":"A frequency agile antenna is proposed with its ground plane having a semicircular shaped slot which is capable of switching the frequency to different bands, one at a time, in the wide frequency range of 5.33 GHz to 9.90 GHz. To achieve frequency agility, switching of six RF PIN diodes which are placed along the slot length is done in various combinations. Frequency tuning ratio of about 1.85 : 1 can be achieved using this design. Results such as return losses, gain, bandwidth, and radiation patterns are presented in this paper.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115538230","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
H. J. Shin, R. Narayanan, Mark A. Asmuth, M. Rangaswamy
The paper introduces the principles, simulation results, and hardware implementation of ultrawideband (UWB) noise radar for obtaining tomographic images of various scenarios of rotating cylindrical objects using independent and identically distributed UWB noise waveforms. A UWB noise radar was designed to transmit multiple UWB random noise waveforms over the 3–5 GHz frequency range and to measure the backward scattering data for the validation of the theoretical analysis and numerical simulation results. The reconstructed tomographic images of the rotating cylindrical objects based on experimental results are seen to be in good agreement with the simulation results, which demonstrates the capability of UWB noise radar for complete two-dimensional tomographic image reconstruction of various shaped metallic and dielectric target objects.
{"title":"Ultrawideband Noise Radar Tomography: Principles, Simulation, and Experimental Validation","authors":"H. J. Shin, R. Narayanan, Mark A. Asmuth, M. Rangaswamy","doi":"10.1155/2016/5787895","DOIUrl":"https://doi.org/10.1155/2016/5787895","url":null,"abstract":"The paper introduces the principles, simulation results, and hardware implementation of ultrawideband (UWB) noise radar for obtaining tomographic images of various scenarios of rotating cylindrical objects using independent and identically distributed UWB noise waveforms. A UWB noise radar was designed to transmit multiple UWB random noise waveforms over the 3–5 GHz frequency range and to measure the backward scattering data for the validation of the theoretical analysis and numerical simulation results. The reconstructed tomographic images of the rotating cylindrical objects based on experimental results are seen to be in good agreement with the simulation results, which demonstrates the capability of UWB noise radar for complete two-dimensional tomographic image reconstruction of various shaped metallic and dielectric target objects.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-04-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128573190","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The potentials of GaN, SiC, and Si for application as microwave sources in mixed tunnelling avalanche transit time mode operation at submillimetre wave (sub-mm wave) frequency around 0.35 terahertz (THz) are investigated using some computer simulation methods. Design criteria to choose width, doping concentration, and area are highlighted. From the results of our simulation we observed that the Si diode produces the least power output of 41 mW followed by the GaN diode with 760 mW and the SiC diode with 2.89 W. In addition, the GaN diode has more noise than the SiC diode (by 5 dB) as well as the Si diode (by 10 dB). The drastically different performance between the GaN and the SiC diode is attributed to the incorporation of disparate carrier velocity in GaN which were not being used by other authors. In spite of the low power and high noise of the GaN compared to the SiC diode, the presence of several peaks in the mean square noise voltage curves and the existence of several minima in the noise measure curves would open a new direction in the design of GaN low-noise ATT diodes capable of multifrequency tuning like a DAR diode.
{"title":"Comparative Assessment of GaN as a Microwave Source with Si and SiC for Mixed Mode Operation at Submillimetre Wave Band of Frequency","authors":"P. Panda, S. Padhi, G. Dash","doi":"10.1155/2016/4370345","DOIUrl":"https://doi.org/10.1155/2016/4370345","url":null,"abstract":"The potentials of GaN, SiC, and Si for application as microwave sources in mixed tunnelling avalanche transit time mode operation at submillimetre wave (sub-mm wave) frequency around 0.35 terahertz (THz) are investigated using some computer simulation methods. Design criteria to choose width, doping concentration, and area are highlighted. From the results of our simulation we observed that the Si diode produces the least power output of 41 mW followed by the GaN diode with 760 mW and the SiC diode with 2.89 W. In addition, the GaN diode has more noise than the SiC diode (by 5 dB) as well as the Si diode (by 10 dB). The drastically different performance between the GaN and the SiC diode is attributed to the incorporation of disparate carrier velocity in GaN which were not being used by other authors. In spite of the low power and high noise of the GaN compared to the SiC diode, the presence of several peaks in the mean square noise voltage curves and the existence of several minima in the noise measure curves would open a new direction in the design of GaN low-noise ATT diodes capable of multifrequency tuning like a DAR diode.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"95 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-02-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121746930","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. Vytovtov, S. Zouhdi, R. Dubrovka, V. Hnatushenko
Electromagnetic properties of an anisotropic stratified slab with an arbitrary orientation of the anisotropy axis under an oblique incidence of a plane harmonic wave are studied. The dependence of the eigenwave wavenumbers and the reflection coefficient on an anisotropy axis orientation and frequency is investigated. For the first time, the expression for the translation matrix is obtained in the compact analytical form. The controlled two-way dual-frequency (duplex) isolator based on the above described slab is presented for the first time. It is based on the properties of the anisotropic structure described here but not on the Faraday effect.
{"title":"The Terahertz Controlled Duplex Isolator: Physical Grounds and Numerical Experiment","authors":"K. Vytovtov, S. Zouhdi, R. Dubrovka, V. Hnatushenko","doi":"10.1155/2016/1468508","DOIUrl":"https://doi.org/10.1155/2016/1468508","url":null,"abstract":"Electromagnetic properties of an anisotropic stratified slab with an arbitrary orientation of the anisotropy axis under an oblique incidence of a plane harmonic wave are studied. The dependence of the eigenwave wavenumbers and the reflection coefficient on an anisotropy axis orientation and frequency is investigated. For the first time, the expression for the translation matrix is obtained in the compact analytical form. The controlled two-way dual-frequency (duplex) isolator based on the above described slab is presented for the first time. It is based on the properties of the anisotropic structure described here but not on the Faraday effect.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"65 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-01-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130499014","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
An application of defected ground structure (DGS) to reduce out-of-band harmonics has been presented. A compact, proximity feed fractal slotted microstrip antenna for wireless local area network (WLAN) applications has been designed. The proposed 3rd iteration reduces antenna size by as compared to rectangular conventional antenna and by introducing H shape DGS, the size of an antenna is further reduced by . The DGS introduces stop band characteristics and suppresses higher harmonics, which are out of the band generated by 1st, 2nd, and 3rd iterations. H shape DGS is etched below the 50 Ω feed line and transmission coefficient parameters are obtained by CST Microwave Studio software. The values of equivalent and model have been extracted using a trial version of the diplexer filter design software. The stop band characteristic of the equivalent model also has been simulated by the Advance Digital System software, which gives almost the same response as compared to the simulation of CST Microwave Studio V. 12. The proposed antenna operates from 2.4 GHz to 2.49 GHz, which covers WLAN band and has a gain of 4.46 dB at 2.45 GHz resonance frequency.
本文介绍了如何应用缺陷接地结构（DGS）来减少带外谐波。设计了一种用于无线局域网（WLAN）应用的紧凑型近距离馈电分形开槽微带天线。与矩形传统天线相比，所提出的第 3 次迭代可将天线尺寸减小，而通过引入 H 形 DGS，天线尺寸可进一步减小。DGS 引入了停带特性，抑制了高次谐波，这些谐波超出了第 1、2 和 3 次迭代产生的频带。在 50 Ω 馈线下方蚀刻了 H 形 DGS，并通过 CST Microwave Studio 软件获得了传输系数参数。等效值和模型值是通过双工器滤波器设计软件的试用版提取的。等效模型的阻带特性也通过 Advance Digital System 软件进行了仿真，与 CST Microwave Studio V. 12 的仿真结果相比，其响应几乎相同。拟议的天线工作频率为 2.4 GHz 至 2.49 GHz，涵盖 WLAN 频段，在 2.45 GHz 谐振频率下的增益为 4.46 dB。
{"title":"Application of Defected Ground Structure to Suppress Out-of-Band Harmonics for WLAN Microstrip Antenna","authors":"P. Prajapati","doi":"10.1155/2015/210608","DOIUrl":"https://doi.org/10.1155/2015/210608","url":null,"abstract":"An application of defected ground structure (DGS) to reduce out-of-band harmonics has been presented. A compact, proximity feed fractal slotted microstrip antenna for wireless local area network (WLAN) applications has been designed. The proposed 3rd iteration reduces antenna size by as compared to rectangular conventional antenna and by introducing H shape DGS, the size of an antenna is further reduced by . The DGS introduces stop band characteristics and suppresses higher harmonics, which are out of the band generated by 1st, 2nd, and 3rd iterations. H shape DGS is etched below the 50 Ω feed line and transmission coefficient parameters are obtained by CST Microwave Studio software. The values of equivalent and model have been extracted using a trial version of the diplexer filter design software. The stop band characteristic of the equivalent model also has been simulated by the Advance Digital System software, which gives almost the same response as compared to the simulation of CST Microwave Studio V. 12. The proposed antenna operates from 2.4 GHz to 2.49 GHz, which covers WLAN band and has a gain of 4.46 dB at 2.45 GHz resonance frequency.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-12-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130980945","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper describes a detailed study on the application of an open ended coaxial probe technique to determine the permittivity of in the frequency range between 1 GHz and 10 GHz. The compositions of the spinel ferrite were 0.1, 0.3, 0.5, 0.7, and 0.9. The samples were prepared by 10-hour sintering at 900°C with 4°C/min increment from room temperature. Particles showed phase purity and crystallinity in powder X-ray diffraction (XRD) analysis. Surface morphology measurement of scanning electron microscopy (SEM) was conducted on the plane surfaces of the molded samples which gave information about grain morphology, boundaries, and porosity. The tabulated grain size for all samples was in the range of 62 nm–175 nm. The complex permittivity of Ni-Zn ferrite samples was determined using the Agilent Dielectric Probe Kit 85070B. The probe assumed the samples were nonmagnetic homogeneous materials. The permittivity values also provide insights into the effect of the fractional composition of on the bulk permittivity values . Vector Network Analyzer 8720B (VNA) was connected via coaxial cable to the Agilent Dielectric Probe Kit 85070B.
{"title":"Characterization of NixZn1−xFe2O4 and Permittivity of Solid Material of NiO, ZnO, Fe2O3, and NixZn1−xFe2O4 at Microwave Frequency Using Open Ended Coaxial Probe","authors":"F. Esa, Z. Abbas, F. M. Idris, M. Hashim","doi":"10.1155/2015/219195","DOIUrl":"https://doi.org/10.1155/2015/219195","url":null,"abstract":"This paper describes a detailed study on the application of an open ended coaxial probe technique to determine the permittivity of in the frequency range between 1 GHz and 10 GHz. The compositions of the spinel ferrite were 0.1, 0.3, 0.5, 0.7, and 0.9. The samples were prepared by 10-hour sintering at 900°C with 4°C/min increment from room temperature. Particles showed phase purity and crystallinity in powder X-ray diffraction (XRD) analysis. Surface morphology measurement of scanning electron microscopy (SEM) was conducted on the plane surfaces of the molded samples which gave information about grain morphology, boundaries, and porosity. The tabulated grain size for all samples was in the range of 62 nm–175 nm. The complex permittivity of Ni-Zn ferrite samples was determined using the Agilent Dielectric Probe Kit 85070B. The probe assumed the samples were nonmagnetic homogeneous materials. The permittivity values also provide insights into the effect of the fractional composition of on the bulk permittivity values . Vector Network Analyzer 8720B (VNA) was connected via coaxial cable to the Agilent Dielectric Probe Kit 85070B.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"352 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-11-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134502693","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The turn ratio, coupling space between sections, and substrate permittivity effects on spilt ring resonator (SRR) are investigated. The analysis of the presented SRR with respect to the effects of substrate and number of gaps per ring to further characterize its peculiarities is experimented with miniaturized capability as our intent. Six different SRRs were designed with different turn ratios, and the sixth is rectangular microstrip patch centre-inserted. Different numbers and gap sizes are cut on the SRRs while the gap spacing between the conductors of the SRR was varied to determine their effects taking cognizance of the effects of different substrates. The designs were investigated numerically using 3D finite integration technique commercial EM solver, and the resulting designs were prototyped and subsequently measured. Findings indicate that the reflection coefficient of the MSRR with centre-inserted patch antenna is better compared to MSRR without the patch antenna irrespective of the laminate substrate board, and so is its gain.
{"title":"Turn Ratio, Substrates’ Permittivity Characterization, and Analysis of Split Ring Resonator Based Antenna","authors":"S. S. Olokede, Nurul A. Mohd-Razif, N. Mahyuddin","doi":"10.1155/2015/453710","DOIUrl":"https://doi.org/10.1155/2015/453710","url":null,"abstract":"The turn ratio, coupling space between sections, and substrate permittivity effects on spilt ring resonator (SRR) are investigated. The analysis of the presented SRR with respect to the effects of substrate and number of gaps per ring to further characterize its peculiarities is experimented with miniaturized capability as our intent. Six different SRRs were designed with different turn ratios, and the sixth is rectangular microstrip patch centre-inserted. Different numbers and gap sizes are cut on the SRRs while the gap spacing between the conductors of the SRR was varied to determine their effects taking cognizance of the effects of different substrates. The designs were investigated numerically using 3D finite integration technique commercial EM solver, and the resulting designs were prototyped and subsequently measured. Findings indicate that the reflection coefficient of the MSRR with centre-inserted patch antenna is better compared to MSRR without the patch antenna irrespective of the laminate substrate board, and so is its gain.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"41 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-11-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134220747","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Three types of Ultrawideband (UWB) antennas with single, double, and triple notched bands are proposed and investigated for UWB communication applications. The proposed antennas consist of CPW fed monopole with spiral slot etched on the patch. In this paper single, double, and also triple band notches with central frequency of 3.57, 5.12, and 8.21 GHz have been generated by varying the length of a single spiral slot. The proposed antenna is low-profile and of compact size. A stable gain is obtained throughout the operation band except the three notched frequencies. The antennas have omnidirectional and stable radiation patterns across all the relevant bands. Moreover, relatively consistent group delays across the UWB frequencies are noticed for the triple notched band antenna. A prototype of the UWB antenna with triple notched bands is fabricated and the measured results of the antenna are compared with the simulated results.
{"title":"Design of UWB Planar Monopole Antennas with Etched Spiral Slot on the Patch for Multiple Band-Notched Characteristics","authors":"S. Das, D. Mitra, S. Chaudhuri","doi":"10.1155/2015/303215","DOIUrl":"https://doi.org/10.1155/2015/303215","url":null,"abstract":"Three types of Ultrawideband (UWB) antennas with single, double, and triple notched bands are proposed and investigated for UWB communication applications. The proposed antennas consist of CPW fed monopole with spiral slot etched on the patch. In this paper single, double, and also triple band notches with central frequency of 3.57, 5.12, and 8.21 GHz have been generated by varying the length of a single spiral slot. The proposed antenna is low-profile and of compact size. A stable gain is obtained throughout the operation band except the three notched frequencies. The antennas have omnidirectional and stable radiation patterns across all the relevant bands. Moreover, relatively consistent group delays across the UWB frequencies are noticed for the triple notched band antenna. A prototype of the UWB antenna with triple notched bands is fabricated and the measured results of the antenna are compared with the simulated results.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121644569","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：