A quasi-Yagi antenna is developed to operate at 2.4 GHz (ISM band) presenting a low profile and off-axis radiation when packaged over a metal ground plane. The off-axis radiation is realized by incorporating a Jerusalem cross frequency selective surface (JC-FSS) as the ground plane for the antenna. A JC-FSS is preferred because of its frequency stability in the operating band for a large angular spectrum (≈70°) of TE- and TM-polarized incident waves. In this research, the substrate of the antenna flush-mounted on top of the FSS is added to the JC-FSS model and allows for a smaller cell grid. The prepared quasi-Yagi antenna over the JC-FSS offered 260 MHz of functional bandwidth and 54° of beam tilt towards the end-fire direction. To the best of the authors’ knowledge this is the first instance that these two structures are combined for off-axis radiation. Additionally, to support the preferred use of the JC-FSS, the quasi-Yagi is backed by a square patch (SP) FSS for comparison purposes.
{"title":"A Quasi-Yagi Antenna Backed by a Jerusalem Cross Frequency Selective Surface","authors":"S. Melais, D. Cure, T. Weller","doi":"10.1155/2013/354789","DOIUrl":"https://doi.org/10.1155/2013/354789","url":null,"abstract":"A quasi-Yagi antenna is developed to operate at 2.4 GHz (ISM band) presenting a low profile and off-axis radiation when packaged over a metal ground plane. The off-axis radiation is realized by incorporating a Jerusalem cross frequency selective surface (JC-FSS) as the ground plane for the antenna. A JC-FSS is preferred because of its frequency stability in the operating band for a large angular spectrum (≈70°) of TE- and TM-polarized incident waves. In this research, the substrate of the antenna flush-mounted on top of the FSS is added to the JC-FSS model and allows for a smaller cell grid. The prepared quasi-Yagi antenna over the JC-FSS offered 260 MHz of functional bandwidth and 54° of beam tilt towards the end-fire direction. To the best of the authors’ knowledge this is the first instance that these two structures are combined for off-axis radiation. Additionally, to support the preferred use of the JC-FSS, the quasi-Yagi is backed by a square patch (SP) FSS for comparison purposes.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"230 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-02-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123258184","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The fourth mobile generation requires of multistandard operating handsets of small physical size as well as has an increasing demand for higher data rates. Compact multiband printed inverted-F antennas (IFAs) for available wireless communications are proposed in this paper. A new design of a printed IFA based on a uniplanar compact EBG concept is proposed. An L-loaded printed IFA shaped over an artificial ground plane is designed as the main antenna to cover the GSM, LTE, UMTS, bluetooth, and WLAN. The multi-band is created by means of an electromagnetic band-gap (EBG) structure that is used as a ground plane. Different shapes of uniplanar EBG as ring, split ring resonator, and a spiral rather than mushroom-like structure are investigated. The proposed antenna is built on the uniplanar EBG ground plane with a size of mm2, which is suitable for most of the mobile devices.
{"title":"Compact Multiband Printed IFA on Electromagnetic Band-Gap Structures Ground Plane for Wireless Applications","authors":"D. Elsheakh, E. Abdallah","doi":"10.1155/2013/248501","DOIUrl":"https://doi.org/10.1155/2013/248501","url":null,"abstract":"The fourth mobile generation requires of multistandard operating handsets of small physical size as well as has an increasing demand for higher data rates. Compact multiband printed inverted-F antennas (IFAs) for available wireless communications are proposed in this paper. A new design of a printed IFA based on a uniplanar compact EBG concept is proposed. An L-loaded printed IFA shaped over an artificial ground plane is designed as the main antenna to cover the GSM, LTE, UMTS, bluetooth, and WLAN. The multi-band is created by means of an electromagnetic band-gap (EBG) structure that is used as a ground plane. Different shapes of uniplanar EBG as ring, split ring resonator, and a spiral rather than mushroom-like structure are investigated. The proposed antenna is built on the uniplanar EBG ground plane with a size of mm2, which is suitable for most of the mobile devices.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-02-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124594277","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Microwave-osmotic dehydration of cranberries was evaluated under continuous flow medium spray (MWODS) conditions after some pretreatments. A central composite rotatable design was used with three input variables at five levels (temperature, 33°C–67°C; sucrose concentration, 33°B–67°B; and contact time, 5–55 min). Responses were moisture loss (ML), solids gain (SG), and weight reduction (WR) as well as color and texture parameters. The responses were related to process variables using response surface methodology and statistical analysis: each model was tested for lack of fit to assure nonsignificance and each process variable was tested for significance . Temperature was found to have the most prominent effect as it was significant with all drying (ML, SG, and WR) and quality (hardness and chewiness) parameters, while contact time was found to be significant with ML and WR. Concentration wasn’t found to be significant for any response. Increasing skin pretreatment severity generally promoted SG but had little effect on ML. The exception was chemical peeling, which favored ML but had no effect on SG. Overall, MWODS enables food dehydration in a much faster period of time than conventional osmotic dehydration (COD), while specifically promoting moisture loss over solids gain.
{"title":"Microwave-Osmotic Dehydration of Cranberries under Continuous Flow Medium Spray Conditions","authors":"Derek Wray, H. Ramaswamy","doi":"10.1155/2013/207308","DOIUrl":"https://doi.org/10.1155/2013/207308","url":null,"abstract":"Microwave-osmotic dehydration of cranberries was evaluated under continuous flow medium spray (MWODS) conditions after some pretreatments. A central composite rotatable design was used with three input variables at five levels (temperature, 33°C–67°C; sucrose concentration, 33°B–67°B; and contact time, 5–55 min). Responses were moisture loss (ML), solids gain (SG), and weight reduction (WR) as well as color and texture parameters. The responses were related to process variables using response surface methodology and statistical analysis: each model was tested for lack of fit to assure nonsignificance <path id=\"x1D443\" d=\"M619 482q0 -69 -40.5 -119t-96 -72.5t-118.5 -26.5h-44l-70 20l-31 -151q-14 -67 0.5 -83t89.5 -22l-5 -28h-287l8 28q65 7 81.5 22t29.5 83l79 398q12 56 0.5 70.5t-78.5 20.5l7 28h255q108 0 164 -43t56 -125zM524 478q0 141 -146 141q-25 0 -47 -8q-16 -6 -20.5 -13.5\u0000t-10.5 -39.5l-43 -241q37 -13 83 -13q67 0 125.5 45t58.5 129z\" /> <path id=\"x30\" d=\"M241 635q53 0 94 -28.5t63.5 -76t33.5 -102.5t11 -116q0 -58 -11 -112.5t-34 -103.5t-63.5 -78.5t-94.5 -29.5t-95 28t-64.5 75t-34.5 102.5t-11 118.5q0 58 11.5 112.5t34.5 103t64.5 78t95.5 29.5zM238 602q-32 0 -55.5 -25t-35.5 -68t-17.5 -91t-5.5 -105\u0000q0 -76 10 -138.5t37 -107.5t69 -45q32 0 55.5 25t35.5 68.5t17.5 91.5t5.5 105t-5.5 105.5t-18 92t-36 68t-56.5 24.5z\" /> <path id=\"x35\" d=\"M153 550l-26 -186q79 31 111 31q90 0 141.5 -51t51.5 -119q0 -93 -89 -166q-85 -69 -173 -71q-32 0 -61.5 11.5t-41.5 23.5q-18 17 -17 34q2 16 22 33q14 9 26 -1q61 -50 124 -50q60 0 93 43.5t33 104.5q0 69 -41.5 110t-121.5 41q-53 0 -102 -20l38 305h286l6 -8\u0000l-26 -65h-233z\" /> and each process variable was tested for significance . Temperature was found to have the most prominent effect as it was significant with all drying (ML, SG, and WR) and quality (hardness and chewiness) parameters, while contact time was found to be significant with ML and WR. Concentration wasn’t found to be significant for any response. Increasing skin pretreatment severity generally promoted SG but had little effect on ML. The exception was chemical peeling, which favored ML but had no effect on SG. Overall, MWODS enables food dehydration in a much faster period of time than conventional osmotic dehydration (COD), while specifically promoting moisture loss over solids gain.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-01-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130160385","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Studying the behavior of soil contaminated by diesel requires the measurement and calculation of electrical parameters such as permittivity and backscattering coefficient. It is also necessary to study the physical parameters such as surface roughness. The intent of this paper is to present a broad and updated overview of the diesel oil contaminated soil, emphasizing permittivity and scattering coefficient that are involved in determining and detecting the rate at which and extent to which hydrocarbons contaminate the soil and environment. The measurement of permittivity and the calculations of backscattering coefficient values were made with different amounts of diesel oil contamination and different incident angles in 5° intervals ranging from 10° to 80° for both horizontal and vertical polarization at C band. The values of scattering coefficient for different look angles (25°, 30°, 35°, 40°, 45°, 50°, and 55°) were calculated and are suitable for comparison with data generated from other remote sensing platforms. Accurate electrical parameter measurements of soil contamination and recognition of their dependence on physical and chemical composition are interesting and can support using microwave remote sensing instruments to observe the earth.
{"title":"Permittivity and Backscattering Coefficient of Diesel Oil-Contaminated Soil at C Band (5.3 GHz)","authors":"Nima Ahmadian, S. Hasan, O. Calla","doi":"10.1155/2013/950862","DOIUrl":"https://doi.org/10.1155/2013/950862","url":null,"abstract":"Studying the behavior of soil contaminated by diesel requires the measurement and calculation of electrical parameters such as permittivity and backscattering coefficient. It is also necessary to study the physical parameters such as surface roughness. The intent of this paper is to present a broad and updated overview of the diesel oil contaminated soil, emphasizing permittivity and scattering coefficient that are involved in determining and detecting the rate at which and extent to which hydrocarbons contaminate the soil and environment. The measurement of permittivity and the calculations of backscattering coefficient values were made with different amounts of diesel oil contamination and different incident angles in 5° intervals ranging from 10° to 80° for both horizontal and vertical polarization at C band. The values of scattering coefficient for different look angles (25°, 30°, 35°, 40°, 45°, 50°, and 55°) were calculated and are suitable for comparison with data generated from other remote sensing platforms. Accurate electrical parameter measurements of soil contamination and recognition of their dependence on physical and chemical composition are interesting and can support using microwave remote sensing instruments to observe the earth.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-01-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116549432","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Rain attenuation at Ka-band is a severe phenomenon that drastically impairs satellite communications at these frequencies. Several adaptive compensation techniques have been elaborated to counteract its effects and most often applied one at a time. The present paper proposes the contemporary exploitation of different techniques in a combined approach. Such an integrated approach is thoroughly analyzed in a simplified scenario and will be shown to achieve a very effective solution, making the Ka-band spectrum fully available for broadband satellite applications and network-centric systems.
{"title":"A Systemic Approach to the Compensation of Rain Attenuation in Ka-Band Communication Satellites","authors":"P. Angeletti, M. Lisi","doi":"10.1155/2012/791635","DOIUrl":"https://doi.org/10.1155/2012/791635","url":null,"abstract":"Rain attenuation at Ka-band is a severe phenomenon that drastically impairs satellite communications at these frequencies. Several adaptive compensation techniques have been elaborated to counteract its effects and most often applied one at a time. The present paper proposes the contemporary exploitation of different techniques in a combined approach. Such an integrated approach is thoroughly analyzed in a simplified scenario and will be shown to achieve a very effective solution, making the Ka-band spectrum fully available for broadband satellite applications and network-centric systems.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127835125","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
1Applied Electromagnetics Group, Department of Naval, Electrical, Electronic, and Telecommunication Engineering, University of Genoa, 16145 Genoa, Italy 2Applied Microwave Nondestructive Testing Laboratory (amntl), Department of Electrical and Computer Engineering, Missouri University of Science and Technology, Rolla, MO 65409, USA 3Department of Quality, Anritsu Company, Morgan Hill, CA 95037, USA
{"title":"Microwave and Millimeter-Wave Sensors, Systems, and Techniques for Electromagnetic Imaging and Materials Characterization","authors":"A. Randazzo, K. Donnell, Y. Lee","doi":"10.1155/2012/132136","DOIUrl":"https://doi.org/10.1155/2012/132136","url":null,"abstract":"1Applied Electromagnetics Group, Department of Naval, Electrical, Electronic, and Telecommunication Engineering, University of Genoa, 16145 Genoa, Italy 2Applied Microwave Nondestructive Testing Laboratory (amntl), Department of Electrical and Computer Engineering, Missouri University of Science and Technology, Rolla, MO 65409, USA 3Department of Quality, Anritsu Company, Morgan Hill, CA 95037, USA","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122437039","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Swarm intelligence denotes a class of new stochastic algorithms inspired by the collective social behavior of natural entities (e.g., birds, ants, etc.). Such approaches have been proven to be quite effective in several applicative fields, ranging from intelligent routing to image processing. In the last years, they have also been successfully applied in electromagnetics, especially for antenna synthesis, component design, and microwave imaging. In this paper, the application of swarm optimization methods to microwave imaging is discussed, and some recent imaging approaches based on such methods are critically reviewed.
{"title":"Swarm Optimization Methods in Microwave Imaging","authors":"A. Randazzo","doi":"10.1155/2012/491713","DOIUrl":"https://doi.org/10.1155/2012/491713","url":null,"abstract":"Swarm intelligence denotes a class of new stochastic algorithms inspired by the collective social behavior of natural entities (e.g., birds, ants, etc.). Such approaches have been proven to be quite effective in several applicative fields, ranging from intelligent routing to image processing. In the last years, they have also been successfully applied in electromagnetics, especially for antenna synthesis, component design, and microwave imaging. In this paper, the application of swarm optimization methods to microwave imaging is discussed, and some recent imaging approaches based on such methods are critically reviewed.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-10-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133189130","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A dual-band SiGe HBT frequency-tunable and phase-shifting differential amplifier has been developed for the future active phased array antennas with a multiband, multibeam, and multitarget tracking operation. The amplifier uses varactor-loaded, stacked LC resonators in the design of the output circuit in order to provide frequency-tunable and phase-shifting capabilities for dual frequencies. By utilizing the varactor-loaded LC resonator, which has a variable resonant frequency and a large insertion phase variation, frequency-tunable and phase-shifting performances become available. Moreover, by using the stacked configuration, the frequency and insertion phase can be varied independently for dual frequencies. A dual-band SiGe HBT differential amplifier has achieved a lower-frequency tuning range of 0.56 to 0.7 GHz for a higher fixed frequency of 0.97 GHz as well as a higher-frequency tuning range of 0.92 to 1.01 GHz for a lower fixed frequency of 0.63 GHz. A lower-frequency phase variation of 99° and a higher-frequency phase variation of 90.3° have been accomplished at 0.63 and 0.97 GHz, respectively. This is the first report on the dual-band differential amplifier with frequency-tunable and phase-shifting capabilities.
{"title":"A Dual-Band SiGe HBT Frequency-Tunable and Phase-Shifting Differential Amplifier Employing Varactor-Loaded, Stacked LC Resonators","authors":"K. Sakamoto, Y. Itoh","doi":"10.1155/2012/157971","DOIUrl":"https://doi.org/10.1155/2012/157971","url":null,"abstract":"A dual-band SiGe HBT frequency-tunable and phase-shifting differential amplifier has been developed for the future active phased array antennas with a multiband, multibeam, and multitarget tracking operation. The amplifier uses varactor-loaded, stacked LC resonators in the design of the output circuit in order to provide frequency-tunable and phase-shifting capabilities for dual frequencies. By utilizing the varactor-loaded LC resonator, which has a variable resonant frequency and a large insertion phase variation, frequency-tunable and phase-shifting performances become available. Moreover, by using the stacked configuration, the frequency and insertion phase can be varied independently for dual frequencies. A dual-band SiGe HBT differential amplifier has achieved a lower-frequency tuning range of 0.56 to 0.7 GHz for a higher fixed frequency of 0.97 GHz as well as a higher-frequency tuning range of 0.92 to 1.01 GHz for a lower fixed frequency of 0.63 GHz. A lower-frequency phase variation of 99° and a higher-frequency phase variation of 90.3° have been accomplished at 0.63 and 0.97 GHz, respectively. This is the first report on the dual-band differential amplifier with frequency-tunable and phase-shifting capabilities.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"85 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-10-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132366256","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Physical principles for designing a multipurpose set of high 𝑄-factor quasioptical and corrugated resonators with automatic frequency tuning (𝑄>6×104, VSWR<1.6) that can operate in the frequency band from 37.5 to 400 GHz are presented. The electrodynamical calculation methods of resonators, the constructive particularities of resonators, the methods and results of the experimental researches are considered. This set of resonators can be used as a universal measuring resonator for measuring radio-signal fluctuations and parameters of different media, in particular, nanotube composites and high-temperature superconductors.
{"title":"High -Factor Wideband Resonators for Millimeter and Submillimeter Applications","authors":"T. Gaevskaya, V. Karpovich, V. Rodionova","doi":"10.1155/2012/842489","DOIUrl":"https://doi.org/10.1155/2012/842489","url":null,"abstract":"Physical principles for designing a multipurpose set of high 𝑄-factor quasioptical and corrugated resonators with automatic frequency tuning (𝑄>6×104, VSWR<1.6) that can operate in the frequency band from 37.5 to 400 GHz are presented. The electrodynamical calculation methods of resonators, the constructive particularities of resonators, the methods and results of the experimental researches are considered. This set of resonators can be used as a universal measuring resonator for measuring radio-signal fluctuations and parameters of different media, in particular, nanotube composites and high-temperature superconductors.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"1126 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-10-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116059534","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In this paper, and for the first time, the performance of various ultra wideband pulse modulation schemes are discussed and compared in terms of narrowband interference robustness, symbol error rate, system complexity, data rate, and maximum transmit power with respect to transceiver distance and channel capacity. The channel model is the UWB IEEE 802.15.3a multipath indoor channel model under additive white Gaussian noise. The transmit power was evaluated by integrating the fifth derivative of the power spectrum density of the Gaussian pulse over the whole bandwidth.
{"title":"Performance Comparison of UWB Pulse Modulation Schemes under White Gaussian Noise Channels","authors":"O. Abedi, M. Yagoub","doi":"10.1155/2012/590153","DOIUrl":"https://doi.org/10.1155/2012/590153","url":null,"abstract":"In this paper, and for the first time, the performance of various ultra wideband pulse modulation schemes are discussed and compared in terms of narrowband interference robustness, symbol error rate, system complexity, data rate, and maximum transmit power with respect to transceiver distance and channel capacity. The channel model is the UWB IEEE 802.15.3a multipath indoor channel model under additive white Gaussian noise. The transmit power was evaluated by integrating the fifth derivative of the power spectrum density of the Gaussian pulse over the whole bandwidth.","PeriodicalId":232251,"journal":{"name":"International Journal of Microwave Science and Technology","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-10-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128344512","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：