Watermelon is a widely cultivated cucurbitaceous crop with economic and dietary significance. The plant's ability to reproduce effectively relies on the harmonious growth and maturation of both its male and female flowers. At the farm level, determining the exact amount of ethylene required to regulate the development and sexual expression of individual floral buds remains uncertain, despite the known influence of exogenously applied ethylene on these processes. The goal of the research was to explore how the ethephon doses influence vegetative characteristics, sex expression, and watermelon yield. The experiment, employing a one-factorial Randomized Complete Block Design (RCBD) comprising five treatments and four replications, was conducted in a farmer's field in Buttabari, Jhapa. Using R-stat software, the data were analyzed at a 5% level of significance. Treatment consisted of Ethephon with four doses namely; 100ppm, 200ppm, 300ppm, 400ppm, and a control. Ethephon application was done twice, once at the two true-leaf stages and another at four true-leaf stages. The study revealed that plant height decreased with ethephon compared to the control, reaching a minimum of 280.1 cm at 400 ppm and a maximum of 307.1 cm in the control. Additionally, the highest branch numbers were observed with ethephon at 200 ppm. The plot treated with 200ppm ethephon was found to be more effective than alternative doses at increasing the total number of female flowers, bearing 15.25 female flowers per plant. Control (166.50 per plant) and 400 ppm (150.00 per plant) had the highest and lowest male flower counts per plant, respectively. A maximum yield of 25.12 t/ha and a minimum yield of 19.1 t/ha were determined at 200 ppm and control, respectively. Hence, farmers are found to benefit from ethephon doses of 200 ppm.
{"title":"Efficacy of Ethephon Doses on Vegetative and Reproductive Attributes of Watermelon [(Citrullus lanatus (Thunb.) Matsum. & Nakai]","authors":"Ashish Pangeni, Sandip Kathayat, Pankaj Karki Dholi, Sujan Khanal, Garima Parajuli, Bharat Bimarsa","doi":"10.24925/turjaf.v12i6.1039-1045.6794","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.1039-1045.6794","url":null,"abstract":"Watermelon is a widely cultivated cucurbitaceous crop with economic and dietary significance. The plant's ability to reproduce effectively relies on the harmonious growth and maturation of both its male and female flowers. At the farm level, determining the exact amount of ethylene required to regulate the development and sexual expression of individual floral buds remains uncertain, despite the known influence of exogenously applied ethylene on these processes. The goal of the research was to explore how the ethephon doses influence vegetative characteristics, sex expression, and watermelon yield. The experiment, employing a one-factorial Randomized Complete Block Design (RCBD) comprising five treatments and four replications, was conducted in a farmer's field in Buttabari, Jhapa. Using R-stat software, the data were analyzed at a 5% level of significance. Treatment consisted of Ethephon with four doses namely; 100ppm, 200ppm, 300ppm, 400ppm, and a control. Ethephon application was done twice, once at the two true-leaf stages and another at four true-leaf stages. The study revealed that plant height decreased with ethephon compared to the control, reaching a minimum of 280.1 cm at 400 ppm and a maximum of 307.1 cm in the control. Additionally, the highest branch numbers were observed with ethephon at 200 ppm. The plot treated with 200ppm ethephon was found to be more effective than alternative doses at increasing the total number of female flowers, bearing 15.25 female flowers per plant. Control (166.50 per plant) and 400 ppm (150.00 per plant) had the highest and lowest male flower counts per plant, respectively. A maximum yield of 25.12 t/ha and a minimum yield of 19.1 t/ha were determined at 200 ppm and control, respectively. Hence, farmers are found to benefit from ethephon doses of 200 ppm.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":"114 47","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141361943","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-06-10DOI: 10.24925/turjaf.v12i6.1104-1109.6710
Elif Rabia Şanlı
Since the ban on the use of antibiotics to promote growth in animal production in 2006, there has been a growing interest in alternative feed additives for animal production. Postbiotics, which have been utilized for this purpose in recent years, are highly promising feed additives that substitute banned substances like antibiotics. In recent years, there have been numerous studies on the utilization of postbiotics in ruminant animal nutrition. This article includes the definition of postbiotics, their properties, methods of obtaining them, and their potential applications in ruminant animal nutrition and health.
{"title":"Usability of Postbiotics in Ruminant Nutrition and Health","authors":"Elif Rabia Şanlı","doi":"10.24925/turjaf.v12i6.1104-1109.6710","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.1104-1109.6710","url":null,"abstract":"Since the ban on the use of antibiotics to promote growth in animal production in 2006, there has been a growing interest in alternative feed additives for animal production. Postbiotics, which have been utilized for this purpose in recent years, are highly promising feed additives that substitute banned substances like antibiotics. In recent years, there have been numerous studies on the utilization of postbiotics in ruminant animal nutrition. This article includes the definition of postbiotics, their properties, methods of obtaining them, and their potential applications in ruminant animal nutrition and health.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":" 86","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141365882","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-06-10DOI: 10.24925/turjaf.v12i6.1072-1079.6747
M. Duman, A. Şekeroğlu, Yüksel Aksoy
The aim of this study was to determine some reproductive and growth characteristics and was to analyses some environmental factors the growth and survival performance of lambs between 2017 and 2020 reared within the framework of the National Small Ruminant Project in Altunhisar district of Nigde. The data of the study were collected from 24000 heads ewes and 24869 male and female lambs raised in 25 different farms. The average of infertility, fertility, fecundity, litter size, single and twining rates of Akkaraman ewes were found to be 7.90, 92.10, 1.04, 1.13, 87.49 and 12.51%, respectively. The effects of year of birth, type of birth, age of dam and gender on birth, 60th day and 120th day live weights of Akkaraman lambs were found to be statistically significant (P<0.001). It was also determined that the effect of type of lambing, gender, year of birth and dams age on the survival of lambs at 60th and 120th days was significant (P<0.01). The average survival rate of lambs at 60th and 120th day was 96.2 and 95.3.%, respectively. As a result, it was concluded that while the reproductive characteristics of Akkaraman ewes were in accordance with the literature reports, the effects of the environmental factors on the live weights and survival of lambs were significant and these factors were partially affected by slower growth.
{"title":"Investigation of Some Fertility and Growth Traits of Akkaraman Sheep under Breeder Condition in Altunhisar District of Niğde Province","authors":"M. Duman, A. Şekeroğlu, Yüksel Aksoy","doi":"10.24925/turjaf.v12i6.1072-1079.6747","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.1072-1079.6747","url":null,"abstract":"The aim of this study was to determine some reproductive and growth characteristics and was to analyses some environmental factors the growth and survival performance of lambs between 2017 and 2020 reared within the framework of the National Small Ruminant Project in Altunhisar district of Nigde. The data of the study were collected from 24000 heads ewes and 24869 male and female lambs raised in 25 different farms. The average of infertility, fertility, fecundity, litter size, single and twining rates of Akkaraman ewes were found to be 7.90, 92.10, 1.04, 1.13, 87.49 and 12.51%, respectively. The effects of year of birth, type of birth, age of dam and gender on birth, 60th day and 120th day live weights of Akkaraman lambs were found to be statistically significant (P<0.001). It was also determined that the effect of type of lambing, gender, year of birth and dams age on the survival of lambs at 60th and 120th days was significant (P<0.01). The average survival rate of lambs at 60th and 120th day was 96.2 and 95.3.%, respectively. As a result, it was concluded that while the reproductive characteristics of Akkaraman ewes were in accordance with the literature reports, the effects of the environmental factors on the live weights and survival of lambs were significant and these factors were partially affected by slower growth.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":"124 22","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141361518","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-06-10DOI: 10.24925/turjaf.v12i6.966-977.6632
I. Tekiner
This study investigated the effects of different processing techniques and sol-gel coating on the physical properties of biocomposite material. Two dispersion series from corn starch, clay, and sorbitol were prepared by conventional and microwave-assisted processing, and casting technique. One film from each series was sol-gel coated by immersion. All the samples were subjected to moisture content (MC), water solubility (WS), water absorption (WA), FT-IR, DSC, and SEM/digital microscopy tests. The results showed that the coated films contained higher MC (11.5±0.5%) than the non-coated films (5.3±0.6%) and absorbed less water (44.7±12.4%), compared to the non-coated ones (166.3±2.5%). Non-coated films exhibited less solubility in water (26.1±0.2%) than the coated ones (51.0±0.7%). FT-IR test detected cross-linking (1723 cm-1 ester) in the microwave-assisted coated film. The sol-gel coating increased the latent heat of melting and specific heat values by 14.9% and 19.4% for conventionally fabricated samples, and 22.3% and 25.3% for microwaved films, respectively, whereas it reduced the temperature of melting by 23.1% for conventionally fabricated ones, and 6.6% for microwaved ones. Microscopic tests revealed that microwaved compact morphology indicated better gelatinization of starch. Overall, microwaving and sol-gel coating need further investigation to improve the physical properties of biocomposite materials for food packaging.
{"title":"Effects of Different Processing Techniques and Sol-Gel Coating on Physical Properties of Starch and Clay-Based Biocomposite Material","authors":"I. Tekiner","doi":"10.24925/turjaf.v12i6.966-977.6632","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.966-977.6632","url":null,"abstract":"This study investigated the effects of different processing techniques and sol-gel coating on the physical properties of biocomposite material. Two dispersion series from corn starch, clay, and sorbitol were prepared by conventional and microwave-assisted processing, and casting technique. One film from each series was sol-gel coated by immersion. All the samples were subjected to moisture content (MC), water solubility (WS), water absorption (WA), FT-IR, DSC, and SEM/digital microscopy tests. The results showed that the coated films contained higher MC (11.5±0.5%) than the non-coated films (5.3±0.6%) and absorbed less water (44.7±12.4%), compared to the non-coated ones (166.3±2.5%). Non-coated films exhibited less solubility in water (26.1±0.2%) than the coated ones (51.0±0.7%). FT-IR test detected cross-linking (1723 cm-1 ester) in the microwave-assisted coated film. The sol-gel coating increased the latent heat of melting and specific heat values by 14.9% and 19.4% for conventionally fabricated samples, and 22.3% and 25.3% for microwaved films, respectively, whereas it reduced the temperature of melting by 23.1% for conventionally fabricated ones, and 6.6% for microwaved ones. Microscopic tests revealed that microwaved compact morphology indicated better gelatinization of starch. Overall, microwaving and sol-gel coating need further investigation to improve the physical properties of biocomposite materials for food packaging.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":"106 41","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141362312","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-06-10DOI: 10.24925/turjaf.v12i6.924-931.6651
Abdul Mumeen Iddrisu, Kağan Kökten, Erdal Çaçan
This study was carried out to determine the effect of different irrigation frequency and levels on silage sorghum plant for yield and quality at the Bingöl University Agricultural Research and Application Field in 2022 using the Master BMR variety as plant material. Randomized complete blocks applying the split-plots experimental design with three replications was used; four irrigation levels (25%, 50%, 75% and 100%) and four irrigation frequencies (5, 10, 15 and 20 days) were considered as treatments. Percentage of moisture replacement was determined using total moisture loss from evapotranspiration (ET). Amount of water discharged by emitters were predetermined, hence, time was used to determine the exact amount. Properties related to green forage yield, dry matter yield, crude protein ratio, crude protein yield, acid detergent insoluble fibre, neutral detergent insoluble fibre, digestible dry matter, dry matter consumption and relative feed value were investigated. Statistically significant differences between all the examined features were observed. The highest green forage yield, dry matter yield and crude protein yield were obtained from 5-day frequency and 100% level. Highest crude protein ratio from 5-day frequency and 25% level, lowest acid detergent insoluble fibre rate and highest digestible dry matter rate from 20-day frequency and 25% level, highest dry matter intake and relative feed value with the lowest neutral detergent insoluble fibre rate were observed from 25% level with 10 and 20-day frequencies. In conclusion; it can be stated that, to obtain high yield from silage sorghum, it is necessary to irrigate at 5 days frequencies and 100% level. However, high-quality product can be obtained with a 10-day frequency and a 25% level with low yield.
{"title":"The Effect of Different Irrigation Frequency and Level on Yield and Quality Characteristics of Silage Sorghum","authors":"Abdul Mumeen Iddrisu, Kağan Kökten, Erdal Çaçan","doi":"10.24925/turjaf.v12i6.924-931.6651","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.924-931.6651","url":null,"abstract":"This study was carried out to determine the effect of different irrigation frequency and levels on silage sorghum plant for yield and quality at the Bingöl University Agricultural Research and Application Field in 2022 using the Master BMR variety as plant material. Randomized complete blocks applying the split-plots experimental design with three replications was used; four irrigation levels (25%, 50%, 75% and 100%) and four irrigation frequencies (5, 10, 15 and 20 days) were considered as treatments. Percentage of moisture replacement was determined using total moisture loss from evapotranspiration (ET). Amount of water discharged by emitters were predetermined, hence, time was used to determine the exact amount. Properties related to green forage yield, dry matter yield, crude protein ratio, crude protein yield, acid detergent insoluble fibre, neutral detergent insoluble fibre, digestible dry matter, dry matter consumption and relative feed value were investigated. Statistically significant differences between all the examined features were observed. The highest green forage yield, dry matter yield and crude protein yield were obtained from 5-day frequency and 100% level. Highest crude protein ratio from 5-day frequency and 25% level, lowest acid detergent insoluble fibre rate and highest digestible dry matter rate from 20-day frequency and 25% level, highest dry matter intake and relative feed value with the lowest neutral detergent insoluble fibre rate were observed from 25% level with 10 and 20-day frequencies. In conclusion; it can be stated that, to obtain high yield from silage sorghum, it is necessary to irrigate at 5 days frequencies and 100% level. However, high-quality product can be obtained with a 10-day frequency and a 25% level with low yield.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":" 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141365761","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-06-10DOI: 10.24925/turjaf.v12i6.991-998.6783
M. M. Erdaw, A. Guteta
The aim of this study was to investigate the effects of partially replacing the commercial soybean meal (SBM) with a home-treated, locally produced raw-full fat soybean (RFFSB) in the diets of broilers. A 3×2×2+1 factorial arrangement was used to conduct this feeding trial. A test ingredient (RFFSB) was differently soaked (0, 6 or 12 hrs), drained, boiled (25 or 35 min) and sundried. Following this, it was hammered to pass through a 0.2-mm sieve, then 12 experimental diets were formulated, replacing the SBM by such a home-treated-RFFSB at 50 or 75%. The control diet didn’t contain any RFFSBN. Totally 13 experimental diets were prepared and every treatment was replicated 3 times and 10 chicks per replicate. The results revealed that replacing the commercial SBM by a treated RFFSB had no significant interaction effects on any measured parameter. However, soaking and then boiling it (RFFSB) had significant (P<0.05) interaction effect on the BWTG (1-13d and 14-28d). When increasing the soaking time, the FI (feed intake), BWTG (body weight gain) and feed efficiency were significantly (P<0.05) decreased. When increasing the boiling duration, both FI and feed efficiency (14-28d) were improved. But, when increasing the replacement rate of RFFSB, the feed efficiency was deteriorated. Broilers fed on both control and diets, containing a non-soaked RFFSB had higher (P<0.05) BWTG (1-13d). Birds fed on diets containing RFFSB that was soaked for the longest period (12 hrs) had significantly lower BWTG. Birds fed on diets, containing prolonged boiling duration had significantly (P<0.05) higher BWTG and feed efficiency. There was no interaction (P> 0.05) effect on both carcass yield and cut-products. Neither increasing a boiling time nor a replacement rate had (P<0.05) any influence on the WT (weight) of the carcass. Birds on both control and on non-soaked RFFSB diets had better WT of carcass products. There was no interaction (P>0.05) effect on organ developments. However, increasing the soaking-duration significantly (P<0.05) reduced the organ developments. Therefore, it is concluded that commercial SBM can be replaced by a non-soaked, but boiled raw soybean in diets of broilers.
{"title":"Effects of Partially Replacing the Commercial Soybean Meal, With A Soaked and Boiled Raw Full-Fat Soybean in Broiler Diets","authors":"M. M. Erdaw, A. Guteta","doi":"10.24925/turjaf.v12i6.991-998.6783","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.991-998.6783","url":null,"abstract":"The aim of this study was to investigate the effects of partially replacing the commercial soybean meal (SBM) with a home-treated, locally produced raw-full fat soybean (RFFSB) in the diets of broilers. A 3×2×2+1 factorial arrangement was used to conduct this feeding trial. A test ingredient (RFFSB) was differently soaked (0, 6 or 12 hrs), drained, boiled (25 or 35 min) and sundried. Following this, it was hammered to pass through a 0.2-mm sieve, then 12 experimental diets were formulated, replacing the SBM by such a home-treated-RFFSB at 50 or 75%. The control diet didn’t contain any RFFSBN. Totally 13 experimental diets were prepared and every treatment was replicated 3 times and 10 chicks per replicate. The results revealed that replacing the commercial SBM by a treated RFFSB had no significant interaction effects on any measured parameter. However, soaking and then boiling it (RFFSB) had significant (P<0.05) interaction effect on the BWTG (1-13d and 14-28d). When increasing the soaking time, the FI (feed intake), BWTG (body weight gain) and feed efficiency were significantly (P<0.05) decreased. When increasing the boiling duration, both FI and feed efficiency (14-28d) were improved. But, when increasing the replacement rate of RFFSB, the feed efficiency was deteriorated. Broilers fed on both control and diets, containing a non-soaked RFFSB had higher (P<0.05) BWTG (1-13d). Birds fed on diets containing RFFSB that was soaked for the longest period (12 hrs) had significantly lower BWTG. Birds fed on diets, containing prolonged boiling duration had significantly (P<0.05) higher BWTG and feed efficiency. There was no interaction (P> 0.05) effect on both carcass yield and cut-products. Neither increasing a boiling time nor a replacement rate had (P<0.05) any influence on the WT (weight) of the carcass. Birds on both control and on non-soaked RFFSB diets had better WT of carcass products. There was no interaction (P>0.05) effect on organ developments. However, increasing the soaking-duration significantly (P<0.05) reduced the organ developments. Therefore, it is concluded that commercial SBM can be replaced by a non-soaked, but boiled raw soybean in diets of broilers.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":" 368","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141364314","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-06-10DOI: 10.24925/turjaf.v12i6.918-923.6734
B. Şin, Mustafa Yılmaz, Melike Köse, Ömer Ümit Okçu
Many allelopathic crops are cultivated in agricultural fields, and these plants can influence the growth of other plants in the cultivation environment with their phytotoxic compounds. One of these plants is the faba bean. In this study conducted under the ecological conditions of Sakarya/Arifiye, the allelopathic effects of Eresen-87, Salkim, Bilecik, and Sakarya faba bean genotypes on weeds such as Johnson grass (Sorghum halepense L.), curly dock (Rumex crispus L.), purslane (Portulaca oleracea L.), and wild mustard (Sinapis arvensis L.) were investigated. Weed seeds used in the experiment were collected from agricultural fields in the Sakarya province. Extracts from dried plant parts of faba bean genotypes were prepared and applied to petri dishes containing weed seeds at concentrations of 5% and 10%, with four replications. At the end of the research, it was observed that all faba bean genotypes at all application doses caused a decrease in germination rate (%), root length (cm), and shoot length (cm) parameters in the four weed species tested. The best results were determined as Eresen-87 and Bilecik at 10% concentration. When the activities of fresh and dry extracts of faba bean genotypes was compared, it was determined that dry application had a higher allelopathic effect.
{"title":"Investigation of the Allelopathic Effects of Different Faba Bean (Vicia faba L.) Genotypes Against Various Weeds","authors":"B. Şin, Mustafa Yılmaz, Melike Köse, Ömer Ümit Okçu","doi":"10.24925/turjaf.v12i6.918-923.6734","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.918-923.6734","url":null,"abstract":"Many allelopathic crops are cultivated in agricultural fields, and these plants can influence the growth of other plants in the cultivation environment with their phytotoxic compounds. One of these plants is the faba bean. In this study conducted under the ecological conditions of Sakarya/Arifiye, the allelopathic effects of Eresen-87, Salkim, Bilecik, and Sakarya faba bean genotypes on weeds such as Johnson grass (Sorghum halepense L.), curly dock (Rumex crispus L.), purslane (Portulaca oleracea L.), and wild mustard (Sinapis arvensis L.) were investigated. Weed seeds used in the experiment were collected from agricultural fields in the Sakarya province. Extracts from dried plant parts of faba bean genotypes were prepared and applied to petri dishes containing weed seeds at concentrations of 5% and 10%, with four replications. At the end of the research, it was observed that all faba bean genotypes at all application doses caused a decrease in germination rate (%), root length (cm), and shoot length (cm) parameters in the four weed species tested. The best results were determined as Eresen-87 and Bilecik at 10% concentration. When the activities of fresh and dry extracts of faba bean genotypes was compared, it was determined that dry application had a higher allelopathic effect.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":"103 18","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141361402","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-06-10DOI: 10.24925/turjaf.v12i6.1061-1067.6890
Beyza Kapcı, Zeki Bayramoğlu
The aim of this study is to examine the marketing strategies of ornamental plants in Konya province, to determine the target markets that the sector can best serve, and to evaluate all the components that can contribute to the development of the sector on a provincial basis. In this context, the sales and marketing strategies of the companies producing and selling in Konya province were identified, suggestions for improvement were presented and the potential of ornamental plants in the region was determined. It is believed that the study will make an important contribution to the literature in this area. The main body of the research consists of ornamental plant companies selling in Konya province. In order to answer the questions of the study, a face-to-face survey was conducted with 32 operators representing the main mass. Porter’s Diamond model was used to evaluate the competitiveness. As a result of the analysis of the data, it was observed that the competitiveness of the companies is low and they are not looking for alternative markets. The lack of legislation defining the sector, the problem of organisation, the fact that they consider their income to be sufficient and the lack of information at the point of sale are the main obstacles to competitiveness. In fact, the main priority for a company is to gain a competitive position in order to increase profit margins. For this reason, companies need to evaluate the opportunities that may present themselves, develop strategies to add value to customers in the long term, and determine strategies to be close to the market in order to create new markets.
{"title":"Investigation of Marketing Strategies of Ornamental Plants in Konya Province","authors":"Beyza Kapcı, Zeki Bayramoğlu","doi":"10.24925/turjaf.v12i6.1061-1067.6890","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.1061-1067.6890","url":null,"abstract":"The aim of this study is to examine the marketing strategies of ornamental plants in Konya province, to determine the target markets that the sector can best serve, and to evaluate all the components that can contribute to the development of the sector on a provincial basis. In this context, the sales and marketing strategies of the companies producing and selling in Konya province were identified, suggestions for improvement were presented and the potential of ornamental plants in the region was determined. It is believed that the study will make an important contribution to the literature in this area. The main body of the research consists of ornamental plant companies selling in Konya province. In order to answer the questions of the study, a face-to-face survey was conducted with 32 operators representing the main mass. Porter’s Diamond model was used to evaluate the competitiveness. As a result of the analysis of the data, it was observed that the competitiveness of the companies is low and they are not looking for alternative markets. The lack of legislation defining the sector, the problem of organisation, the fact that they consider their income to be sufficient and the lack of information at the point of sale are the main obstacles to competitiveness. In fact, the main priority for a company is to gain a competitive position in order to increase profit margins. For this reason, companies need to evaluate the opportunities that may present themselves, develop strategies to add value to customers in the long term, and determine strategies to be close to the market in order to create new markets.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":"108 51","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141362344","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-06-10DOI: 10.24925/turjaf.v12i6.1068-1071.6803
E. H. Aksu, Ece Yaren Kurtuluş, Berat Aktürk
One of the most crucial elements influencing the efficacy of artificial insemination applications is semen quality. It is known that post-thaw semen quality was affected by thawing method. Errors made during the thawing process can compromise the motility, viability, morphology and DNA integrity of spermatozoa after thawing. This study was conducted to investigate the effects of four distinct thawing procedures on post-thaw semen quality in bulls. The first group was designated as 24°C (n=8); the straws in this group were thawed in a water bath at 24°C for 60 seconds. Second group was designated as 32°C (n=8); the straws in this group were thawed in a water bath at 32°C for 60 seconds. Third group was designated as 38°C (n=8); the straws in this group were thawed in a water bath at 38°C for 30 seconds. And the fourth group was designated as 70°C (n=8); the straws in this group were thawed in a water bath at 70°C for 7 seconds. Following the thawing process, motility, sperm morphology, viability, and DNA damage rate in spermatozoa were evaluated. Results showed that in 32°C group and 24°C group sperm motility significantly decreased when compared to 70°C and 38°C groups. Additionally, the 24°C group exhibited a significantly elevated DNA damage rate compared to the 70°C group, while no differences were observed in the other groups. In conclusion, the most ideal thawing procedures are at 70°C for 7 seconds and at 38°C for 30 seconds are recommended to get optimum sperm quality from frozen bull semen after thawing.
{"title":"The Effects of Different Thawing Procedures on Spermatological Parameters of Frozen Bull Sperm","authors":"E. H. Aksu, Ece Yaren Kurtuluş, Berat Aktürk","doi":"10.24925/turjaf.v12i6.1068-1071.6803","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.1068-1071.6803","url":null,"abstract":"One of the most crucial elements influencing the efficacy of artificial insemination applications is semen quality. It is known that post-thaw semen quality was affected by thawing method. Errors made during the thawing process can compromise the motility, viability, morphology and DNA integrity of spermatozoa after thawing. This study was conducted to investigate the effects of four distinct thawing procedures on post-thaw semen quality in bulls. The first group was designated as 24°C (n=8); the straws in this group were thawed in a water bath at 24°C for 60 seconds. Second group was designated as 32°C (n=8); the straws in this group were thawed in a water bath at 32°C for 60 seconds. Third group was designated as 38°C (n=8); the straws in this group were thawed in a water bath at 38°C for 30 seconds. And the fourth group was designated as 70°C (n=8); the straws in this group were thawed in a water bath at 70°C for 7 seconds. Following the thawing process, motility, sperm morphology, viability, and DNA damage rate in spermatozoa were evaluated. Results showed that in 32°C group and 24°C group sperm motility significantly decreased when compared to 70°C and 38°C groups. Additionally, the 24°C group exhibited a significantly elevated DNA damage rate compared to the 70°C group, while no differences were observed in the other groups. In conclusion, the most ideal thawing procedures are at 70°C for 7 seconds and at 38°C for 30 seconds are recommended to get optimum sperm quality from frozen bull semen after thawing.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":" 38","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141365430","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-06-10DOI: 10.24925/turjaf.v12i6.1019-1025.6556
Uğur Tan, O. Arabacı
In this study, it was aimed to determine the effects of different sowing times and different varieties of German chamomilla (Matricaria recutita L.) on agronomic and technological characteristics. The study was conducted in experimental fields of the Department of Field Crops, Faculty of Agriculture in Adnan Menderes University. Two different tetraploid Matricaria recutita L. (Bodegold and Zloty Lan) cultivars were used for this study. Zloty Lan was provided by Germany and Bodegold was provided from Atatürk Central Horticultural Research Institute. The trial was conducted according to a split plot experimental design with 4 block. Factors consist of 5 sowing times as main plots (1 October, 15 October, 1 November, 15 November, 1 December) and 2 genotypes as subplots (Bodegold and Zloty Lan). The effect of sowing times and genotypes was found statistically significant on fresh flower yield. The highest flower yield was found 61.61 kg da-1 . The average values for plant height ranged from 45.43 to 55.20 cm, flower diameter ranged from 25.24 to 27.53 mm, biomass ranged from 130 to 332.3 kg da-1, fresh flower yield ranged from 19.74 to 61.61 kg da-1 , drug herb ranged from 35.5 to 73.5 kg da-1 , drug flower ranged from 7.4 to 13.3 kg da-1 , essential oil content ranged from 0.025% to 0.083% and essential oil yield ranged from 0.020 to 0.090 l da-1. The primary constituents of essential oil have been discovered as bisabolol oxide a and bisabolene oxide.
本研究旨在确定不同播种时间和不同品种的德国洋甘菊（Matricaria recutita L.）对农艺和技术特性的影响。研究在阿德南-门德斯大学农学院大田作物系的试验田中进行。这项研究使用了两种不同的四倍体母菊（Bodegold 和 Zloty Lan）栽培品种。Zloty Lan由德国提供，Bodegold由阿塔图尔克中央园艺研究所提供。试验采用 4 个小区的分小区试验设计。因素包括作为主小区的 5 个播种时间（10 月 1 日、10 月 15 日、11 月 1 日、11 月 15 日、12 月 1 日）和作为子小区的 2 个基因型（Bodegold 和 Zloty Lan）。播种时间和基因型对鲜花产量的影响具有显著的统计学意义。鲜花产量最高，为 61.61 公斤 da-1。植株高度的平均值为 45.43 至 55.20 厘米，花直径为 25.24 至 27.53 毫米，生物量为 130 至 332.3 千克 da-1，鲜花产量为 19.74 至 61.61 kg da-1，药草从 35.5 kg da-1 到 73.5 kg da-1，药花从 7.4 kg da-1 到 13.3 kg da-1，精油含量从 0.025% 到 0.083%，精油产量从 0.020 l da-1 到 0.090 l da-1。已发现精油的主要成分为氧化比沙波罗 a 和氧化比沙波罗烯。
{"title":"A Comprehensive Study on the Agronomic and Technological Responses of Different Chamomile (Matricaria recutita L.) Varieties at Diverse Sowing Times","authors":"Uğur Tan, O. Arabacı","doi":"10.24925/turjaf.v12i6.1019-1025.6556","DOIUrl":"https://doi.org/10.24925/turjaf.v12i6.1019-1025.6556","url":null,"abstract":"In this study, it was aimed to determine the effects of different sowing times and different varieties of German chamomilla (Matricaria recutita L.) on agronomic and technological characteristics. The study was conducted in experimental fields of the Department of Field Crops, Faculty of Agriculture in Adnan Menderes University. Two different tetraploid Matricaria recutita L. (Bodegold and Zloty Lan) cultivars were used for this study. Zloty Lan was provided by Germany and Bodegold was provided from Atatürk Central Horticultural Research Institute. The trial was conducted according to a split plot experimental design with 4 block. Factors consist of 5 sowing times as main plots (1 October, 15 October, 1 November, 15 November, 1 December) and 2 genotypes as subplots (Bodegold and Zloty Lan). The effect of sowing times and genotypes was found statistically significant on fresh flower yield. The highest flower yield was found 61.61 kg da-1 . The average values for plant height ranged from 45.43 to 55.20 cm, flower diameter ranged from 25.24 to 27.53 mm, biomass ranged from 130 to 332.3 kg da-1, fresh flower yield ranged from 19.74 to 61.61 kg da-1 , drug herb ranged from 35.5 to 73.5 kg da-1 , drug flower ranged from 7.4 to 13.3 kg da-1 , essential oil content ranged from 0.025% to 0.083% and essential oil yield ranged from 0.020 to 0.090 l da-1. The primary constituents of essential oil have been discovered as bisabolol oxide a and bisabolene oxide.","PeriodicalId":23382,"journal":{"name":"Turkish Journal of Agriculture - Food Science and Technology","volume":"110 11","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141362166","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：