Pub Date : 2022-09-01DOI: 10.23919/apnoms56106.2022.9919983
R. Pirrone, R. Azevedo, Gautam Biswas
Cholesteatoma of external auditory canal is a rare disease with an estimated incidence of 1 : 1000 of all patients seen in otologic practice. The purpose of this article is to present a case of this condition, with its main features and differential diagnosis, making it more easily recognizable in daily practice. Case Report: E.M.S 72 year-old male with chronic otorrhea in the left ear for about 8 months, with no improvement despite the use of different types of ear drops. Otoscopy revealed purulent secretion and bone erosion of the external auditory canal (EAC).The tympanic membrane had no perforation and its transparency was preserved. Computed tomography of the mastoid showed the erosion area in EAC (Grade III), without middle ear involvement. The histopathology was compatible with cholesteatoma. The treatment was surgical. Comments: The external auditory canal cholesteatoma is a difficult disease to diagnose because its clinical similarity to other external ear disorders .Obliterans keratosis and malignant otitis externa are the main conditions that should be considered as a diagnostic differential. CT scan is an important diagnostic tool to elucidate which of these primary lesions is present. A6282. Esthesioneuroblastoma: A Case Report Vanessa de Araújo Souza, Alexandra Torres Cordeiro Lopes de Souza, Mariana Azevedo Silva, Dario Hart Signorini, Eliana Freitas Cardoso, Ana Laura Carneiro Santos, Monik Souza Lins
外耳道胆脂瘤是一种罕见的疾病，估计发病率为耳科实践中所有患者的1:1000。本文的目的是提出一个病例，与它的主要特点和鉴别诊断，使其在日常实践中更容易识别。病例报告:emms 72岁男性，左耳慢性耳漏约8个月，尽管使用不同类型的滴耳液，仍无改善。耳镜检查显示外耳道脓性分泌物及骨质侵蚀。鼓膜无穿孔，保持透明。乳突ct显示EAC糜烂区(III级)，未累及中耳。组织病理学与胆脂瘤相符。手术治疗。评论:外耳道胆脂瘤与其他外耳疾病有相似之处，是一种较难诊断的疾病，闭塞性角化病和外耳恶性中耳炎是应考虑的主要诊断鉴别条件。CT扫描是一个重要的诊断工具，以阐明哪些原发病变存在。A6282。Vanessa de Araújo Souza, Alexandra Torres Cordeiro Lopes de Souza, Mariana Azevedo Silva, Dario Hart Signorini, Eliana Freitas Cardoso, Ana Laura Carneiro Santos, Monik Souza Lins
{"title":"Organizing committee","authors":"R. Pirrone, R. Azevedo, Gautam Biswas","doi":"10.23919/apnoms56106.2022.9919983","DOIUrl":"https://doi.org/10.23919/apnoms56106.2022.9919983","url":null,"abstract":"Cholesteatoma of external auditory canal is a rare disease with an estimated incidence of 1 : 1000 of all patients seen in otologic practice. The purpose of this article is to present a case of this condition, with its main features and differential diagnosis, making it more easily recognizable in daily practice. Case Report: E.M.S 72 year-old male with chronic otorrhea in the left ear for about 8 months, with no improvement despite the use of different types of ear drops. Otoscopy revealed purulent secretion and bone erosion of the external auditory canal (EAC).The tympanic membrane had no perforation and its transparency was preserved. Computed tomography of the mastoid showed the erosion area in EAC (Grade III), without middle ear involvement. The histopathology was compatible with cholesteatoma. The treatment was surgical. Comments: The external auditory canal cholesteatoma is a difficult disease to diagnose because its clinical similarity to other external ear disorders .Obliterans keratosis and malignant otitis externa are the main conditions that should be considered as a diagnostic differential. CT scan is an important diagnostic tool to elucidate which of these primary lesions is present. A6282. Esthesioneuroblastoma: A Case Report Vanessa de Araújo Souza, Alexandra Torres Cordeiro Lopes de Souza, Mariana Azevedo Silva, Dario Hart Signorini, Eliana Freitas Cardoso, Ana Laura Carneiro Santos, Monik Souza Lins","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"51 26","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120808844","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-08-01DOI: 10.1109/pic.2016.7949604
{"title":"Copyright page","authors":"","doi":"10.1109/pic.2016.7949604","DOIUrl":"https://doi.org/10.1109/pic.2016.7949604","url":null,"abstract":"","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114318557","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-05-20DOI: 10.1109/EIT.2010.5612095
Chung-wei Lee
The trend of adopting more and more wireless mobile computers and smartphones has changed our way of living. Those devices heavily rely on the underlying wireless network systems to provide adequate communication support. As streaming audio and video becomes norm, the requests for stringent maximum end-to-end latency and minimum bandwidth make the networking process more difficult. Quality of Service (QoS) routing is designed to fulfill such requirements. In this paper, we study the performance of QoS routing in multi-hop wireless networks from the perspective of energy efficiency. Since there are sophisticated relationships between wireless radio propagation and energy consumption, various QoS routing strategies produce significantly different results in terms of energy efficiency. Through extensive simulation experiments, the shortest path routing, minimum energy routing, minimum hop routing, and maximum throughput routing are compared.
{"title":"Energy efficiency of QoS routing in multi-hop wireless networks","authors":"Chung-wei Lee","doi":"10.1109/EIT.2010.5612095","DOIUrl":"https://doi.org/10.1109/EIT.2010.5612095","url":null,"abstract":"The trend of adopting more and more wireless mobile computers and smartphones has changed our way of living. Those devices heavily rely on the underlying wireless network systems to provide adequate communication support. As streaming audio and video becomes norm, the requests for stringent maximum end-to-end latency and minimum bandwidth make the networking process more difficult. Quality of Service (QoS) routing is designed to fulfill such requirements. In this paper, we study the performance of QoS routing in multi-hop wireless networks from the perspective of energy efficiency. Since there are sophisticated relationships between wireless radio propagation and energy consumption, various QoS routing strategies produce significantly different results in terms of energy efficiency. Through extensive simulation experiments, the shortest path routing, minimum energy routing, minimum hop routing, and maximum throughput routing are compared.","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"146 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115177941","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-05-20DOI: 10.1109/EIT.2010.5612129
G. Tewolde
Great advancements in the electronics technology are making possible applications that were considered science fiction only few decades ago. Increases in packaging density of electronic devices, shrinking of physical weight and volume, and accelerated drop in prices, have all helped for the realization of ubiquitous computing using mobile and embedded electronic devices for everyday use. However, the ability to provide long-term sustainable power to many of such applications has been a significant challenge. This paper provides a short survey of the current trends in low-power embedded computing. It reviews the sources of power consumption in electronic devices, presents dynamic energy management techniques; and finally, it reviews energy harvesting techniques to allow autonomous operation.
{"title":"Current trends in low-power embedded computing","authors":"G. Tewolde","doi":"10.1109/EIT.2010.5612129","DOIUrl":"https://doi.org/10.1109/EIT.2010.5612129","url":null,"abstract":"Great advancements in the electronics technology are making possible applications that were considered science fiction only few decades ago. Increases in packaging density of electronic devices, shrinking of physical weight and volume, and accelerated drop in prices, have all helped for the realization of ubiquitous computing using mobile and embedded electronic devices for everyday use. However, the ability to provide long-term sustainable power to many of such applications has been a significant challenge. This paper provides a short survey of the current trends in low-power embedded computing. It reviews the sources of power consumption in electronic devices, presents dynamic energy management techniques; and finally, it reviews energy harvesting techniques to allow autonomous operation.","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115516483","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-05-20DOI: 10.1109/EIT.2010.5612093
Kevin Kuo
This paper utilizes signal boundary detection and linear predictive coding coefficients (LPCC) in order to analyze and extract features from infant cry instances such that the causes of the cry can be recognized. Consistent reference signals for three separate cry pathologies (hunger, wet diaper, and a need for attention) were decomposed to generate training vectors for cry recognition. Qualitative matching was defined on the basis of similarity between unknown cry LPCC to the weighted coefficients of each of the three training vectors. The experiments show that the analysis of LPCC was a feasible method of recognizing infant cries in order to improve infant care devices.
{"title":"Feature extraction and recognition of infant cries","authors":"Kevin Kuo","doi":"10.1109/EIT.2010.5612093","DOIUrl":"https://doi.org/10.1109/EIT.2010.5612093","url":null,"abstract":"This paper utilizes signal boundary detection and linear predictive coding coefficients (LPCC) in order to analyze and extract features from infant cry instances such that the causes of the cry can be recognized. Consistent reference signals for three separate cry pathologies (hunger, wet diaper, and a need for attention) were decomposed to generate training vectors for cry recognition. Qualitative matching was defined on the basis of similarity between unknown cry LPCC to the weighted coefficients of each of the three training vectors. The experiments show that the analysis of LPCC was a feasible method of recognizing infant cries in order to improve infant care devices.","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128525333","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-05-20DOI: 10.1109/EIT.2010.5612122
Shihan Sajeed, A. Haider
Path of a photon was considered to be used as qubit for implementing quantum NOT gate. An experimental setup was designed using a Mach-Zehnder interferometer constructed from simple optical devices such as He-Ne lasers, beam splitters, mirrors, attenuators etc. and quantum interference was utilized for multi photon case. A number of experiments were performed and the outcome of the experiment was observed by taking a number of photographs of the output beam for a number of input intensities. The observations proved that the setup indeed performed the required NOT transformation with good reliability at multi photon case and thus can be usefully used as a quantum not gate.
{"title":"An experimental demonstration of quantum not gate: Transition from classical to quantum regime","authors":"Shihan Sajeed, A. Haider","doi":"10.1109/EIT.2010.5612122","DOIUrl":"https://doi.org/10.1109/EIT.2010.5612122","url":null,"abstract":"Path of a photon was considered to be used as qubit for implementing quantum NOT gate. An experimental setup was designed using a Mach-Zehnder interferometer constructed from simple optical devices such as He-Ne lasers, beam splitters, mirrors, attenuators etc. and quantum interference was utilized for multi photon case. A number of experiments were performed and the outcome of the experiment was observed by taking a number of photographs of the output beam for a number of input intensities. The observations proved that the setup indeed performed the required NOT transformation with good reliability at multi photon case and thus can be usefully used as a quantum not gate.","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"52 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124620606","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-05-20DOI: 10.1109/EIT.2010.5612112
A. Prajapati, S. Ganesan
This paper proposes a smart channel assignment scheme (S-CAS) for wireless sensor networks. S-CAS performs statistical analysis of load pattern of the individual cluster and adjusts channel assignment dynamically as per requirement generated by the current traffic load. It follows a static schedule during infrastructure establishment based on initial traffic conditions and previous history and later, it utilizes dynamic schedule for channel adjustments. Over a period of time, learning efficiency of the load prediction increases due to availability of more traffic patterns, in turn, reduces transmission delay and improves the system throughput and network life significantly. It provides seamless data transmission even in peak hours and is highly immune to random traffic change. This algorithm optimizes the channel utilization by best-of-four strategies and meets real time sensor network applications requirement. This algorithm is distributed at clusters level and central at node level i.e. it collectively possesses the advantages of all four: static, dynamic, central, and distributed channel assignment approaches. The simulation for 100 nodes network is done and results are discussed. This paper ends with planned future work on traffic prediction accuracy.
{"title":"S-CAS: Smart channel assignment scheme for wireless sensor networks","authors":"A. Prajapati, S. Ganesan","doi":"10.1109/EIT.2010.5612112","DOIUrl":"https://doi.org/10.1109/EIT.2010.5612112","url":null,"abstract":"This paper proposes a smart channel assignment scheme (S-CAS) for wireless sensor networks. S-CAS performs statistical analysis of load pattern of the individual cluster and adjusts channel assignment dynamically as per requirement generated by the current traffic load. It follows a static schedule during infrastructure establishment based on initial traffic conditions and previous history and later, it utilizes dynamic schedule for channel adjustments. Over a period of time, learning efficiency of the load prediction increases due to availability of more traffic patterns, in turn, reduces transmission delay and improves the system throughput and network life significantly. It provides seamless data transmission even in peak hours and is highly immune to random traffic change. This algorithm optimizes the channel utilization by best-of-four strategies and meets real time sensor network applications requirement. This algorithm is distributed at clusters level and central at node level i.e. it collectively possesses the advantages of all four: static, dynamic, central, and distributed channel assignment approaches. The simulation for 100 nodes network is done and results are discussed. This paper ends with planned future work on traffic prediction accuracy.","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126806299","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-05-20DOI: 10.1109/EIT.2010.5612120
Shihan Sajeed, Anis Ahmed, Saeed Mahmud Ullah, Z. Mozumder
Transverse modes of optical fields are proposed to be used as qubits for the implementation of quantum Hadamard gate. Mach-Zehnder Interferometer (MZI), phase shifter, y-junction beam splitters and other optical devices are utilized to realize a quantum Hadamard gate. The possibility of this encoding scheme was designed, simulated and verified through rigorous numerical analyses using the Beam propagation method. The proposed gate has the potential of being more compact and easily realizable than some other optical implementation proposals since it is based on planar light wave circuit technology and can be constructed very easily by using a Mach-Zehnder Interferometer. The Results proved that the design is able to perform the required Hadamard transformation and the conclusion was reached that the model was a successful implementation of a quantum Hadamard gate.
{"title":"An approach to realize a quantum Hadamard gate through optical implementation","authors":"Shihan Sajeed, Anis Ahmed, Saeed Mahmud Ullah, Z. Mozumder","doi":"10.1109/EIT.2010.5612120","DOIUrl":"https://doi.org/10.1109/EIT.2010.5612120","url":null,"abstract":"Transverse modes of optical fields are proposed to be used as qubits for the implementation of quantum Hadamard gate. Mach-Zehnder Interferometer (MZI), phase shifter, y-junction beam splitters and other optical devices are utilized to realize a quantum Hadamard gate. The possibility of this encoding scheme was designed, simulated and verified through rigorous numerical analyses using the Beam propagation method. The proposed gate has the potential of being more compact and easily realizable than some other optical implementation proposals since it is based on planar light wave circuit technology and can be constructed very easily by using a Mach-Zehnder Interferometer. The Results proved that the design is able to perform the required Hadamard transformation and the conclusion was reached that the model was a successful implementation of a quantum Hadamard gate.","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114874070","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-05-20DOI: 10.1109/EIT.2010.5612145
F. Ge, K. Choi
This paper presents novel transceiver baseband for EPC Global Calss-1 Generation-2 compliant RFID reader. The main challenge in RFID reader design is the detection of the backscattered signal from tag. Noise, whose power depends on the environment, can degrade the detection performance. To overcome the environmental noise, the look-up-table based RCT (Raised Cosine Transform) pulse shaping method is proposed for the transmitter architecture. Furthermore the detection of the signal from tag at receiver is impeded by phase noise. To fight these various disturbances, Rising-Falling Edge-detection based Synchronizer (RFES) is proposed as the secondary synchronizer for RFID receiver baseband. This is the first architecture for signal detection in RFID, applying frequency synchronization technique in baseband to reduce the BER, and thus leading to improved performance compared with Industrial readers. The proposed schemes is implemented in Simulink and Verilog; and validated through FPGA. Details of the implementation of the transceiver baseband on an FPGA are explained. Measurement data show that proposed Lookup table based pulse shaping method achieved 4 dB improvement in adjacent band power suppression. Furthermore, introduce of a secondary synchronizer in baseband improves the sensitivity by 3 dB compared with traditional state-of-art readers in industry.
{"title":"Novel design and implementation for highly sensitive baseband protocol of Class-1 Generation-2 UHF RFID system","authors":"F. Ge, K. Choi","doi":"10.1109/EIT.2010.5612145","DOIUrl":"https://doi.org/10.1109/EIT.2010.5612145","url":null,"abstract":"This paper presents novel transceiver baseband for EPC Global Calss-1 Generation-2 compliant RFID reader. The main challenge in RFID reader design is the detection of the backscattered signal from tag. Noise, whose power depends on the environment, can degrade the detection performance. To overcome the environmental noise, the look-up-table based RCT (Raised Cosine Transform) pulse shaping method is proposed for the transmitter architecture. Furthermore the detection of the signal from tag at receiver is impeded by phase noise. To fight these various disturbances, Rising-Falling Edge-detection based Synchronizer (RFES) is proposed as the secondary synchronizer for RFID receiver baseband. This is the first architecture for signal detection in RFID, applying frequency synchronization technique in baseband to reduce the BER, and thus leading to improved performance compared with Industrial readers. The proposed schemes is implemented in Simulink and Verilog; and validated through FPGA. Details of the implementation of the transceiver baseband on an FPGA are explained. Measurement data show that proposed Lookup table based pulse shaping method achieved 4 dB improvement in adjacent band power suppression. Furthermore, introduce of a secondary synchronizer in baseband improves the sensitivity by 3 dB compared with traditional state-of-art readers in industry.","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"12 2","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132241216","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-05-20DOI: 10.1109/EIT.2010.5612090
Kenneth P. Hunt, D. R. Andersen
We present an improved method for reconstructing images from projection data gathered using 2.4GHz, IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS) radio signals. Projection data was gathered using received signal strength indicator (RSSI) data provided by a wireless ZigBee network. Previously the image was reconstructed using the inverse radon transform. We reconstruct the image using a simple algorithm developed for objects with a real index of refraction. This method provides improved image quality.
{"title":"Intensity only microwave diffraction tomography using 802.15.4 wireless networks","authors":"Kenneth P. Hunt, D. R. Andersen","doi":"10.1109/EIT.2010.5612090","DOIUrl":"https://doi.org/10.1109/EIT.2010.5612090","url":null,"abstract":"We present an improved method for reconstructing images from projection data gathered using 2.4GHz, IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS) radio signals. Projection data was gathered using received signal strength indicator (RSSI) data provided by a wireless ZigBee network. Previously the image was reconstructed using the inverse radon transform. We reconstruct the image using a simple algorithm developed for objects with a real index of refraction. This method provides improved image quality.","PeriodicalId":305049,"journal":{"name":"2010 IEEE International Conference on Electro/Information Technology","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131518358","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：