Thermotherapy is a therapeutic approach aimed at alleviating pain, reducing inflammation, and facilitating the wound-healing process through the controlled administration of heat via diverse methodologies. In addition to conventional hot packs and warm water compresses, a myriad of alternative heat modalities is available for therapeutic purposes. Carbon yarn is a nanofiber material that has low density high strength-to-weight ratio. The microscopic crystals of carbon bonded together in an alignment of parallel to the axis. The carbon has unique characteristics of heat resistance and electric conductivity that makes another added use of carbon yarn for thermal therapy for relieve of pain and certain inflammations by allowing the free flow of blood at the applied area. Thus, carbon also has different grades of yarn with differences in their properties and behavior on which our studies have performed for best grade selection. Carbon yarn of 12k and 24k of different lengths have undergone test for their performance. Given the equivalence in functional characteristics between electrical and thermal conductivity, our material selection approach places paramount importance on factors such as electrical efficiency and resistance to high temperatures. This meticulous consideration ensures the creation of an unparalleled and exemplary thermal therapy product. The test outcomes for these carbon yarn samples under various power supply settings have yielded divergent results, yet a notable trend emerges an accelerated heating rate with an increase in current (Amp) while maintaining a constant voltage. The temperature at constant voltage remains the same with the fluctuations of ± 2॰C/min. The objective is to identify a material characterized by minimal electricity consumption and concurrent high-temperature release. Another remarkable attribute of this material is its exceptional ability to rapidly cool to room temperature upon the removal of the power supply. The heat transfer mechanisms, both convective and radiative, exhibited a diminishing trend as the length and number of tows of the simulated carbon fibre electric heating wire increased. Particularly noteworthy was the substantial dominance of convective heat transfer over radiative heat transfer, unequivocally highlighting convective heat transfer as the primary mode for dissipating heat in the carbon fibre electric heating wire.
{"title":"Carbon Comforts: The Next Frontier in Thermotherapy Yarns","authors":"Sai KG Routhu, Venkata Srp Akula, Venkata G Kalla","doi":"10.60142/ijhti.v2i03.05","DOIUrl":"https://doi.org/10.60142/ijhti.v2i03.05","url":null,"abstract":"Thermotherapy is a therapeutic approach aimed at alleviating pain, reducing inflammation, and facilitating the wound-healing process through the controlled administration of heat via diverse methodologies. In addition to conventional hot packs and warm water compresses, a myriad of alternative heat modalities is available for therapeutic purposes. Carbon yarn is a nanofiber material that has low density high strength-to-weight ratio. The microscopic crystals of carbon bonded together in an alignment of parallel to the axis. The carbon has unique characteristics of heat resistance and electric conductivity that makes another added use of carbon yarn for thermal therapy for relieve of pain and certain inflammations by allowing the free flow of blood at the applied area. Thus, carbon also has different grades of yarn with differences in their properties and behavior on which our studies have performed for best grade selection. Carbon yarn of 12k and 24k of different lengths have undergone test for their performance. Given the equivalence in functional characteristics between electrical and thermal conductivity, our material selection approach places paramount importance on factors such as electrical efficiency and resistance to high temperatures. This meticulous consideration ensures the creation of an unparalleled and exemplary thermal therapy product. The test outcomes for these carbon yarn samples under various power supply settings have yielded divergent results, yet a notable trend emerges an accelerated heating rate with an increase in current (Amp) while maintaining a constant voltage. The temperature at constant voltage remains the same with the fluctuations of ± 2॰C/min. The objective is to identify a material characterized by minimal electricity consumption and concurrent high-temperature release. Another remarkable attribute of this material is its exceptional ability to rapidly cool to room temperature upon the removal of the power supply. The heat transfer mechanisms, both convective and radiative, exhibited a diminishing trend as the length and number of tows of the simulated carbon fibre electric heating wire increased. Particularly noteworthy was the substantial dominance of convective heat transfer over radiative heat transfer, unequivocally highlighting convective heat transfer as the primary mode for dissipating heat in the carbon fibre electric heating wire.","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"22 9","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-12-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139185558","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This article explores the critical intersection of sustainability and healthcare textiles, focusing on the emerging trend of sustainable personal protective equipment (PPE). It also delves into the innovative Certification Scheme for Processing of Healthcare Textiles introduced by Andhra Pradesh MedTech Zone (AMTZ), shedding light on its significance in promoting eco-friendly practices within the healthcare industry.
{"title":"Navigating the Future: Sustainable Healthcare Textiles","authors":"Sanjeev Relan","doi":"10.60142/ijhti.v2i03.04","DOIUrl":"https://doi.org/10.60142/ijhti.v2i03.04","url":null,"abstract":"This article explores the critical intersection of sustainability and healthcare textiles, focusing on the emerging trend of sustainable personal protective equipment (PPE). It also delves into the innovative Certification Scheme for Processing of Healthcare Textiles introduced by Andhra Pradesh MedTech Zone (AMTZ), shedding light on its significance in promoting eco-friendly practices within the healthcare industry.","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"16 7","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-12-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139185484","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Anup Kumar, Animesh Agrawal, Leo Mavely, V. Devadasu
India is undergoing significant development in medical device manufacturing, driven by strong government support throughout the conceptualization, inception, and development stages. This growth has been fuelled by initiatives like “Make in India” and the vision of an “AtmaNirbhar Bharat” (self-reliant India), which have provided impetus to the industry. With the integration of AI and machine learning technologies, India has made remarkable progress in the development of domestically manufactured robotic surgery systems. These advanced systems have revolutionized surgical procedures by enhancing precision, efficiency, and accessibility. By leveraging 3D printing technology, India has also made significant strides in producing customized medical devices, prosthetics, and anatomical models. These innovations have facilitated surgical planning and training and contributed to the overall advancement of healthcare in the country. The growth of the medical device industry in India is particularly evident in the class I devices segment. Numerous Indian companies have experienced rapid expansion and have even ventured into foreign markets. This trend is exemplified by the success of hemostatic dressings and wound care devices, where Indian manufacturers have developed high-quality products that have gained recognition globally. While India was traditionally known as the “global pharmacy” for its production of generic pharmaceuticals, it is now making its mark in the medical devices industry by offering innovative and reliable devices on the global stage. The government’s unwavering support and the emphasis on self-reliance have fostered a favorable environment for the growth of India’s medical device manufacturing sector.
在政府的大力支持下，印度的医疗器械制造业在整个构思、立项和开发阶段都取得了长足的发展。印度制造 "等倡议和 "自力更生的印度"（AtmaNirbhar Bharat）愿景为这一行业的发展注入了动力。随着人工智能和机器学习技术的融合，印度在开发国产机器人手术系统方面取得了显著进展。这些先进的系统通过提高精确度、效率和可及性，彻底改变了外科手术程序。通过利用 3D 打印技术，印度在生产定制医疗设备、假肢和解剖模型方面也取得了长足进步。这些创新促进了手术规划和培训，推动了印度医疗保健事业的整体发展。印度医疗器械行业的增长在一类器械领域尤为明显。许多印度公司经历了快速扩张，甚至已涉足国外市场。止血敷料和伤口护理器械的成功就是这一趋势的例证，印度制造商开发的高品质产品已获得全球认可。传统上，印度因生产非专利药品而被称为 "全球药房"，而现在，印度正通过在全球舞台上提供创新、可靠的设备，在医疗器械行业崭露头角。政府的坚定支持和对自力更生的强调，为印度医疗器械制造业的发展营造了良好的环境。
{"title":"Innovations in Advanced Wound Care from India","authors":"Anup Kumar, Animesh Agrawal, Leo Mavely, V. Devadasu","doi":"10.60142/ijhti.v2i03.02","DOIUrl":"https://doi.org/10.60142/ijhti.v2i03.02","url":null,"abstract":"India is undergoing significant development in medical device manufacturing, driven by strong government support throughout the conceptualization, inception, and development stages. This growth has been fuelled by initiatives like “Make in India” and the vision of an “AtmaNirbhar Bharat” (self-reliant India), which have provided impetus to the industry. With the integration of AI and machine learning technologies, India has made remarkable progress in the development of domestically manufactured robotic surgery systems. These advanced systems have revolutionized surgical procedures by enhancing precision, efficiency, and accessibility. By leveraging 3D printing technology, India has also made significant strides in producing customized medical devices, prosthetics, and anatomical models. These innovations have facilitated surgical planning and training and contributed to the overall advancement of healthcare in the country. The growth of the medical device industry in India is particularly evident in the class I devices segment. Numerous Indian companies have experienced rapid expansion and have even ventured into foreign markets. This trend is exemplified by the success of hemostatic dressings and wound care devices, where Indian manufacturers have developed high-quality products that have gained recognition globally. While India was traditionally known as the “global pharmacy” for its production of generic pharmaceuticals, it is now making its mark in the medical devices industry by offering innovative and reliable devices on the global stage. The government’s unwavering support and the emphasis on self-reliance have fostered a favorable environment for the growth of India’s medical device manufacturing sector.","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"75 7-8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-12-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139185432","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Early detection and prevention of cardiovascular illnesses rely heavily on phonocardiogram (PCG) and electrocardiogram (ECG). A novel multi-modal machine learning strategy based on ECG and PCG data is presented in this work for predicting cardiovascular diseases (CVD). ECG and PCG features are combined for optimal feature subset selection using a genetic algorithm (GA). Then, machine learning classifiers are implemented to do the classification of abnormal and normal signals
{"title":"Multi-Modal Feature Integration in Machine Learning Predictions for Cardiovascular Diseases","authors":"Nandhini G, S. Balivada","doi":"10.60142/ijhti.v2i03.03","DOIUrl":"https://doi.org/10.60142/ijhti.v2i03.03","url":null,"abstract":"Early detection and prevention of cardiovascular illnesses rely heavily on phonocardiogram (PCG) and electrocardiogram (ECG). A novel multi-modal machine learning strategy based on ECG and PCG data is presented in this work for predicting cardiovascular diseases (CVD). ECG and PCG features are combined for optimal feature subset selection using a genetic algorithm (GA). Then, machine learning classifiers are implemented to do the classification of abnormal and normal signals","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"45 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-12-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139185606","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Chadalavada Indra, Kanagaraj Subramani, Saurabh Kumar, Arun D, Mayur Das
In today’s healthcare landscape, weighing beds plays a pivotal role in patient care and management. These specialized beds provide critical data on a patient’s weight, which is integral for monitoring health, tailoring treatment plans, and ensuring accurate medication dosages in bed rest patients, etc. They are particularly crucial in critical care settings, where precise weight measurements are essential for fluid balance and medication adjustments. Weighing beds also has a significant impact on preventive healthcare, enabling timely interventions and lifestyle recommendations based on weight-related health risks. In post-operative care, they assist in assessing factors like fluid retention, and guiding post-surgical interventions. Furthermore, in pediatric healthcare, weighing beds are indispensable for monitoring growth and development. Integration with electronic health records streamlines data management, enhancing efficiency for healthcare providers. Overall, weighing beds are indispensable tool in modern healthcare, contributing to comprehensive patient care and well-being. As the medication requirement of the bedridden patient depends on weight, overdose or underdose of the drug is expected to complicate the problems further. Till now, in the market, there were available detecting devices, but the main problem with them is those devices lift the patient totally or lift the bed totally; For this workforce is more required and also time-consuming and cost-effective. For bedridden patients, it is difficult to measure body weight due to lifting and equipment, as well as the need for a workforce. Some beds have inbuilt measuring sensors, but they are cost-effective for bed purchase. For this, there is a possible way to measure the patient’s weight by using a strain gauge sensor
{"title":"Weighing the Weight of Bedridden Patient by using Strain Gauge (Weighing Scale) - Prototype","authors":"Chadalavada Indra, Kanagaraj Subramani, Saurabh Kumar, Arun D, Mayur Das","doi":"10.60142/ijhti.v2i03.01","DOIUrl":"https://doi.org/10.60142/ijhti.v2i03.01","url":null,"abstract":"In today’s healthcare landscape, weighing beds plays a pivotal role in patient care and management. These specialized beds provide critical data on a patient’s weight, which is integral for monitoring health, tailoring treatment plans, and ensuring accurate medication dosages in bed rest patients, etc. They are particularly crucial in critical care settings, where precise weight measurements are essential for fluid balance and medication adjustments. Weighing beds also has a significant impact on preventive healthcare, enabling timely interventions and lifestyle recommendations based on weight-related health risks. In post-operative care, they assist in assessing factors like fluid retention, and guiding post-surgical interventions. Furthermore, in pediatric healthcare, weighing beds are indispensable for monitoring growth and development. Integration with electronic health records streamlines data management, enhancing efficiency for healthcare providers. Overall, weighing beds are indispensable tool in modern healthcare, contributing to comprehensive patient care and well-being. As the medication requirement of the bedridden patient depends on weight, overdose or underdose of the drug is expected to complicate the problems further. Till now, in the market, there were available detecting devices, but the main problem with them is those devices lift the patient totally or lift the bed totally; For this workforce is more required and also time-consuming and cost-effective. For bedridden patients, it is difficult to measure body weight due to lifting and equipment, as well as the need for a workforce. Some beds have inbuilt measuring sensors, but they are cost-effective for bed purchase. For this, there is a possible way to measure the patient’s weight by using a strain gauge sensor","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"21 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-12-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139185718","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Globalising the research by the transformation of the research practices using the latest research tools (Roots of the Educational Research –Redefined) is the motto of the present day and in this regard a review showing six sigma as an add-on for the combined studies of the service – quality with the living –Standards with the descriptive statistics in mind had been considered through this research practice and the approach. The main objective of this research is to provide know-how for budding researchers from the field of the medical to expand their skills towards online tools and techniques.
{"title":"A Novice Approach for the Beginners of the Professional Medical Researchers: An Introduction","authors":"Rajamahanti S. Kiran","doi":"10.60142/ijhti.v2i03.06","DOIUrl":"https://doi.org/10.60142/ijhti.v2i03.06","url":null,"abstract":"Globalising the research by the transformation of the research practices using the latest research tools (Roots of the Educational Research –Redefined) is the motto of the present day and in this regard a review showing six sigma as an add-on for the combined studies of the service – quality with the living –Standards with the descriptive statistics in mind had been considered through this research practice and the approach. The main objective of this research is to provide know-how for budding researchers from the field of the medical to expand their skills towards online tools and techniques.","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"53 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-12-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139185792","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Syed S. Javid, S. S. Christila, Akshaya M, Haritha R, Sanjay P
Hospital acquired pressure ulcers (HAPUs) are a significant issue affecting approximately 5% of patients admitted to thehospital with sudden illnesses. These ulcers are commonly found in patients who have limited mobility and cannot repositionthemselves in bed. The traditional method to prevent HAPUs involves turning the patient every two hours and using specializedmattresses to redistribute pressure. However, low compliance with turning protocols has made this method difficult to maintainin many healthcare facilities. A novel strategy utilising a wearable gadget that continuously tracks the patient’s position hasbeen presented to deal with this problem. A tablet and the device wirelessly interact, and the tablet notifies the carer when thepatient has to be turned in accordance with hospital policy. The device’s embedded technology records the turning procedure andcontinuously tracks the patient’s location. This information is updated on the hospital’s cloud system for centralised monitoring.During testing, the system demonstrated its ability to reliably identify typical patient poses and track the patient’s location
{"title":"Technology-Assisted Pressure Ulcer Prevention: The Automatic Mattress","authors":"Syed S. Javid, S. S. Christila, Akshaya M, Haritha R, Sanjay P","doi":"10.60142/ijhti.v2i02.03","DOIUrl":"https://doi.org/10.60142/ijhti.v2i02.03","url":null,"abstract":"Hospital acquired pressure ulcers (HAPUs) are a significant issue affecting approximately 5% of patients admitted to thehospital with sudden illnesses. These ulcers are commonly found in patients who have limited mobility and cannot repositionthemselves in bed. The traditional method to prevent HAPUs involves turning the patient every two hours and using specializedmattresses to redistribute pressure. However, low compliance with turning protocols has made this method difficult to maintainin many healthcare facilities. A novel strategy utilising a wearable gadget that continuously tracks the patient’s position hasbeen presented to deal with this problem. A tablet and the device wirelessly interact, and the tablet notifies the carer when thepatient has to be turned in accordance with hospital policy. The device’s embedded technology records the turning procedure andcontinuously tracks the patient’s location. This information is updated on the hospital’s cloud system for centralised monitoring.During testing, the system demonstrated its ability to reliably identify typical patient poses and track the patient’s location","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"10 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-08-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139350246","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Teleradiology is an indispensable service in the healthcare sector, offering numerous benefits to healthcare providers, patients, and radiologists. An ideal teleradiology service provider is one with a sturdy infrastructure and technology provisions with a plethora of highly qualified board-certified radiologists who would cater to the needs of accurate, secure, quality, and timely radiologic interpretations with 24/7/365 coverage for small hospitals, clinics, diagnostic imaging centers and emergency rooms. The aim of the article is to give perspective on teleradiology service as an indispensable service in the Indian healthcare sector. The article also emphasizes the key elements an ideal teleradiology service provider should have.
{"title":"Teleradiology Service is Indispensable in the Indian Healthcare Sector","authors":"Arjun Kalyanpur, H. Nair, Neetika Mathur","doi":"10.60142/ijhti.v2i02.04","DOIUrl":"https://doi.org/10.60142/ijhti.v2i02.04","url":null,"abstract":"Teleradiology is an indispensable service in the healthcare sector, offering numerous benefits to healthcare providers, patients, and radiologists. An ideal teleradiology service provider is one with a sturdy infrastructure and technology provisions with a plethora of highly qualified board-certified radiologists who would cater to the needs of accurate, secure, quality, and timely radiologic interpretations with 24/7/365 coverage for small hospitals, clinics, diagnostic imaging centers and emergency rooms. The aim of the article is to give perspective on teleradiology service as an indispensable service in the Indian healthcare sector. The article also emphasizes the key elements an ideal teleradiology service provider should have.","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"10 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-08-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139350211","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Background: To take blood pressure (BP) measurements repeatedly is beneficial for managing the control of hypotension and hypertension. Now present readings depend on cuff-based technology. This study compared blood pressure readings taken with new device without cuff photo plethysmography – PPG with a typical mercury-based sphygmomanometer apparatus.Purpose:A comparative accuracy study of the touch-based non-invasive blood pressure (NIBP) feature of device H360 compared with a mercury-based sphygmomanometer.Material and method: The study was conducted among 95 participants (Above 18 years) at Apex Heart Institute, Ahmedabad from 08th December 2022 to 07th January 2023. We concluded the study on three major factors like age, gender, and health status of participants with hypertensive (n=12), hypotensive (n=18) and normotensive (n=65). Hypotensive and normotensive).Results: According to our observations, the results of the study revealed substantial variations between the three groups in terms of the standard deviation (STD), mean value of systolic blood pressure (SBP) and diastolic blood pressure (DBP), as measured by both the H360 and the mercury sphygmomanometer work on the principle that measures blood pressure by constricting the brachial artery with an inflatable cuff. The cuff is inflated until blood flow stops, then slowly deflated until a tapping sound is heard, indicating blood flow resumption. The pressure at which the sound is heard is the systolic blood pressure, while the pressure at which it disappears is the diastolic blood pressure. The mean values of SBP and DBP were highest in the hypertensive group, followed by the normotensive group, and lowest in the hypotensive group.Conclusion: The study concluded that the device H360 device and mercury sphygmomanometer were effective in measuring blood pressure in hypertensive, hypotensive, and normotensive individuals. However, the H360 showed better accuracy and consistency in measuring blood pressure with a mercury sphygmomanometer.
{"title":"A Comparative Accuracy Study of Touch-based Non-invasive Blood Pressure Feature of Device- H360","authors":"Rahul Rastogi, Neha Rastogi, Ashish Saini, Ojasavi Nirav, Charul Gaur, Itra Singh","doi":"10.60142/ijhti.v2i02.01","DOIUrl":"https://doi.org/10.60142/ijhti.v2i02.01","url":null,"abstract":"Background: To take blood pressure (BP) measurements repeatedly is beneficial for managing the control of hypotension and hypertension. Now present readings depend on cuff-based technology. This study compared blood pressure readings taken with new device without cuff photo plethysmography – PPG with a typical mercury-based sphygmomanometer apparatus.Purpose:A comparative accuracy study of the touch-based non-invasive blood pressure (NIBP) feature of device H360 compared with a mercury-based sphygmomanometer.Material and method: The study was conducted among 95 participants (Above 18 years) at Apex Heart Institute, Ahmedabad from 08th December 2022 to 07th January 2023. We concluded the study on three major factors like age, gender, and health status of participants with hypertensive (n=12), hypotensive (n=18) and normotensive (n=65). Hypotensive and normotensive).Results: According to our observations, the results of the study revealed substantial variations between the three groups in terms of the standard deviation (STD), mean value of systolic blood pressure (SBP) and diastolic blood pressure (DBP), as measured by both the H360 and the mercury sphygmomanometer work on the principle that measures blood pressure by constricting the brachial artery with an inflatable cuff. The cuff is inflated until blood flow stops, then slowly deflated until a tapping sound is heard, indicating blood flow resumption. The pressure at which the sound is heard is the systolic blood pressure, while the pressure at which it disappears is the diastolic blood pressure. The mean values of SBP and DBP were highest in the hypertensive group, followed by the normotensive group, and lowest in the hypotensive group.Conclusion: The study concluded that the device H360 device and mercury sphygmomanometer were effective in measuring blood pressure in hypertensive, hypotensive, and normotensive individuals. However, the H360 showed better accuracy and consistency in measuring blood pressure with a mercury sphygmomanometer.","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"25 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-08-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139350229","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This effort is intended to investigate a research methodology that links meta-analysis with an online strategy for keyword generation and to expand the field of study for future researchers. A thorough investigation was conducted before collecting the data, employing meta-analysis, research synthesis, and integration into the available literature. The results from the research integration were then compared to the real results to see if they were comparable, and based on that comparison, the final results were recorded.
{"title":"A Research Methodology Connecting Meta-analysis and the Online Tools for the Budding Medicos: A Review","authors":"Rajamahanti S. Kiran","doi":"10.60142/ijhti.v2i02.02","DOIUrl":"https://doi.org/10.60142/ijhti.v2i02.02","url":null,"abstract":"This effort is intended to investigate a research methodology that links meta-analysis with an online strategy for keyword generation and to expand the field of study for future researchers. A thorough investigation was conducted before collecting the data, employing meta-analysis, research synthesis, and integration into the available literature. The results from the research integration were then compared to the real results to see if they were comparable, and based on that comparison, the final results were recorded.","PeriodicalId":324941,"journal":{"name":"International Journal of Health Technology and Innovation","volume":"19 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-08-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139350241","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：