The main purpose of this study is to define the relationship between the car impact velocity and serious injury risk or fatality risk of cyclists. The authors investigated the risks of serious injuries and fatalities of cyclists using vehicle-cyclist accident data from the database of the Institute for Traffic Accident Research and Data Analysis (ITARDA) in Japan. The vehicle types considered are sedans, mini vans, box vans, light passenger cars and light cargo vans. The results revealed that a 10-km/h decrease in the impact velocity could reduce the severe injury risk and fatality risk for impact velocities of 40 km/h or higher. Specifically, when the impact velocity was less than or equal to 30 km/h, the serious injury risks were less than 21% and the fatality risks were less than or equal to 1% for the above listed vehicle types. Therefore, if the Collision Damage Mitigation Braking System (CDMBS) equipped vehicles can perform its functions effectively so as to reduce the impact velocities, then cyclist injuries will likely be significantly reduced. Another purpose of this study is to assess the effect of wearing a helmet for protection of the cyclist's head. Impact experiment results showed that the measured head injury criterion (HIC) with helmets are lower than that of head-form impactor without a helmet, reducing the HIC by 57%.
{"title":"Risks of Serious Injuries and Fatalities of Cyclists Associated with Impact Velocities of Cars in Car-Cyclist Accidents in Japan.","authors":"Y. Matsui, S. Oikawa","doi":"10.4271/2015-22-0015","DOIUrl":"https://doi.org/10.4271/2015-22-0015","url":null,"abstract":"The main purpose of this study is to define the relationship between the car impact velocity and serious injury risk or fatality risk of cyclists. The authors investigated the risks of serious injuries and fatalities of cyclists using vehicle-cyclist accident data from the database of the Institute for Traffic Accident Research and Data Analysis (ITARDA) in Japan. The vehicle types considered are sedans, mini vans, box vans, light passenger cars and light cargo vans. The results revealed that a 10-km/h decrease in the impact velocity could reduce the severe injury risk and fatality risk for impact velocities of 40 km/h or higher. Specifically, when the impact velocity was less than or equal to 30 km/h, the serious injury risks were less than 21% and the fatality risks were less than or equal to 1% for the above listed vehicle types. Therefore, if the Collision Damage Mitigation Braking System (CDMBS) equipped vehicles can perform its functions effectively so as to reduce the impact velocities, then cyclist injuries will likely be significantly reduced. Another purpose of this study is to assess the effect of wearing a helmet for protection of the cyclist's head. Impact experiment results showed that the measured head injury criterion (HIC) with helmets are lower than that of head-form impactor without a helmet, reducing the HIC by 57%.","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"59 1","pages":"385-400"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70806776","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. R. Laituri, Scott Henry, Raed E. El-Jawahri, Nirmal Muralidharan, Guosong Li, Marvin Nutt
A provisional, age-dependent thoracic risk equation (or, "risk curve") was derived to estimate moderate-to-fatal injury potential (AIS2+), pertaining to men with responses gaged by the advanced mid-sized male test dummy (THOR50). The derivation involved two distinct data sources: cases from real-world crashes (e.g., the National Automotive Sampling System, NASS) and cases involving post-mortem human subjects (PMHS). The derivation was therefore more comprehensive, as NASS datasets generally skew towards younger occupants, and PMHS datasets generally skew towards older occupants. However, known deficiencies had to be addressed (e.g., the NASS cases had unknown stimuli, and the PMHS tests required transformation of known stimuli into THOR50 stimuli). For the NASS portion of the analysis, chest-injury outcomes for adult male drivers about the size of the THOR50 were collected from real-world, 11-1 o'clock, full-engagement frontal crashes (NASS, 1995-2012 calendar years, 1985-2012 model-year light passenger vehicles). The screening for THOR50-sized men involved application of a set of newly-derived "correction" equations for self-reported height and weight data in NASS. Finally, THOR50 stimuli were estimated via field simulations involving attendant representative restraint systems, and those stimuli were then assigned to corresponding NASS cases (n=508). For the PMHS portion of the analysis, simulation-based closure equations were developed to convert PMHS stimuli into THOR50 stimuli. Specifically, closure equations were derived for the four measurement locations on the THOR50 chest by cross-correlating the results of matched-loading simulations between the test dummy and the age-dependent, Ford Human Body Model. The resulting closure equations demonstrated acceptable fidelity (n=75 matched simulations, R2≥0.99). These equations were applied to the THOR50-sized men in the PMHS dataset (n=20). The NASS and PMHS datasets were combined and subjected to survival analysis with event-frequency weighting and arbitrary censoring. The resulting risk curve--a function of peak THOR50 chest compression and age--demonstrated acceptable fidelity for recovering the AIS2+ chest injury rate of the combined dataset (i.e., IR_dataset=1.97% vs. curve-based IR_dataset=1.98%). Additional sensitivity analyses showed that (a) binary logistic regression yielded a risk curve with nearly-identical fidelity, (b) there was only a slight advantage of combining the small-sample PMHS dataset with the large-sample NASS dataset,
{"title":"Derivation of a Provisional, Age-dependent, AIS2+ Thoracic Risk Curve for the THOR50 Test Dummy via Integration of NASS Cases, PMHS Tests, and Simulation Data.","authors":"T. R. Laituri, Scott Henry, Raed E. El-Jawahri, Nirmal Muralidharan, Guosong Li, Marvin Nutt","doi":"10.4271/2015-22-0006","DOIUrl":"https://doi.org/10.4271/2015-22-0006","url":null,"abstract":"A provisional, age-dependent thoracic risk equation (or, \"risk curve\") was derived to estimate moderate-to-fatal injury potential (AIS2+), pertaining to men with responses gaged by the advanced mid-sized male test dummy (THOR50). The derivation involved two distinct data sources: cases from real-world crashes (e.g., the National Automotive Sampling System, NASS) and cases involving post-mortem human subjects (PMHS). The derivation was therefore more comprehensive, as NASS datasets generally skew towards younger occupants, and PMHS datasets generally skew towards older occupants. However, known deficiencies had to be addressed (e.g., the NASS cases had unknown stimuli, and the PMHS tests required transformation of known stimuli into THOR50 stimuli). For the NASS portion of the analysis, chest-injury outcomes for adult male drivers about the size of the THOR50 were collected from real-world, 11-1 o'clock, full-engagement frontal crashes (NASS, 1995-2012 calendar years, 1985-2012 model-year light passenger vehicles). The screening for THOR50-sized men involved application of a set of newly-derived \"correction\" equations for self-reported height and weight data in NASS. Finally, THOR50 stimuli were estimated via field simulations involving attendant representative restraint systems, and those stimuli were then assigned to corresponding NASS cases (n=508). For the PMHS portion of the analysis, simulation-based closure equations were developed to convert PMHS stimuli into THOR50 stimuli. Specifically, closure equations were derived for the four measurement locations on the THOR50 chest by cross-correlating the results of matched-loading simulations between the test dummy and the age-dependent, Ford Human Body Model. The resulting closure equations demonstrated acceptable fidelity (n=75 matched simulations, R2≥0.99). These equations were applied to the THOR50-sized men in the PMHS dataset (n=20). The NASS and PMHS datasets were combined and subjected to survival analysis with event-frequency weighting and arbitrary censoring. The resulting risk curve--a function of peak THOR50 chest compression and age--demonstrated acceptable fidelity for recovering the AIS2+ chest injury rate of the combined dataset (i.e., IR_dataset=1.97% vs. curve-based IR_dataset=1.98%). Additional sensitivity analyses showed that (a) binary logistic regression yielded a risk curve with nearly-identical fidelity, (b) there was only a slight advantage of combining the small-sample PMHS dataset with the large-sample NASS dataset,","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"59 1","pages":"131-76"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70806059","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Despite the increasing knowledge of the thorax mechanics, the effects of inter-individual differences on the mechanical response are difficult to take into account. Several methods are available in the literature to refine the biofidelity corridors or to extrapolate them to other populations (eg: children, small females, large males). Because of the lack of concrete cases, the relevance of the assumptions is rarely investigated. In 2014, Baudrit et al. published data on thorax dynamic responses of small female and midsize male Post Mortem Human Subjects in side and forward oblique impact tests. The impactor mass was 23.4 kg for all the tests and the nominal impact speed was 4.3 m/s. The diameter of the rigid disk was 130 and 152 mm respectively for the small female specimens and for the midsize male specimens. The authors found that the maximum impact force was a function of the total body mass for each loading. They also reported that the ratio of dissipated energy on total deformation energy was almost constant and equal to 0.88. From these observations, a method was developed to aggregate data of the whole PMHS sample and to construct force time history and deflection time history corridors, for the 50th male and the 5th female, in pure lateral and in forward oblique tests. These corridors are provided in the paper and compared to the literature. Scaling factors derived from the corridors are also provided and used to evaluate the assumptions associated with the corridors provided in the literature.
{"title":"Proposed Method for Development of Small Female and Midsize Male Thorax Dynamic Response Corridors in Side and Forward Oblique Impact Tests.","authors":"P. Baudrit, X. Trosseille","doi":"10.4271/2015-22-0007","DOIUrl":"https://doi.org/10.4271/2015-22-0007","url":null,"abstract":"Despite the increasing knowledge of the thorax mechanics, the effects of inter-individual differences on the mechanical response are difficult to take into account. Several methods are available in the literature to refine the biofidelity corridors or to extrapolate them to other populations (eg: children, small females, large males). Because of the lack of concrete cases, the relevance of the assumptions is rarely investigated. In 2014, Baudrit et al. published data on thorax dynamic responses of small female and midsize male Post Mortem Human Subjects in side and forward oblique impact tests. The impactor mass was 23.4 kg for all the tests and the nominal impact speed was 4.3 m/s. The diameter of the rigid disk was 130 and 152 mm respectively for the small female specimens and for the midsize male specimens. The authors found that the maximum impact force was a function of the total body mass for each loading. They also reported that the ratio of dissipated energy on total deformation energy was almost constant and equal to 0.88. From these observations, a method was developed to aggregate data of the whole PMHS sample and to construct force time history and deflection time history corridors, for the 50th male and the 5th female, in pure lateral and in forward oblique tests. These corridors are provided in the paper and compared to the literature. Scaling factors derived from the corridors are also provided and used to evaluate the assumptions associated with the corridors provided in the literature.","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"59 1","pages":"177-202"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70806134","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
P. Petit, X. Trosseille, Mathieu Lebarbé, P. Baudrit, P. Potier, S. Compigne, M. Masuda, Akira Yamaoka, T. Yasuki, R. Douard
UNLABELLED The WorldSID dummy can be equipped with both a pubic and a sacroiliac joint (S-I joint) loadcell. Although a pubic force criterion and the associated injury risk curve are currently available and used in regulation (ECE95, FMVSS214), as of today injury mechanisms, injury criteria, and injury assessment reference values are not available for the sacroiliac joint itself. The aim of this study was to investigate the sacroiliac joint injury mechanism. Three configurations were identified from full-scale car crashes conducted with the WorldSID 50th percentile male where the force passing through the pubis in all three tests was approximately 1500 N while the sacroiliac Fy/Mx peak values were 4500 N/50 Nm, 2400 N/130 Nm, and 5300 N/150 Nm, respectively. These tests were reproduced using a 150 kg guided probe impacting Post Mortem Human Subjects (PMHS) at 8 m/s, 5.4 m/s and 7.5 m/s. The shape and the orientation of the impacting face of the probe were selected to match the WorldSID pubic Fy and sacroiliac Fy/Mx loads of the three vehicle test configurations. Three PMHS were tested in each of the three configurations (nine PMHS in total). RESULTS In the first PMHS configuration, one specimen sustained an AIS 3 injury and one sustained an AIS 4 injury (an unstable pelvis with complete disruption of the posterior arch, a sacroiliac joint disruption associated with an iliac fracture, and a pubic symphysis separation). In the second configuration, all specimens sustained a fracture of the superior lateral iliac wing (AIS 2). In the third configuration, one specimen sustained a partial disruption of the anterior arch (AIS 2). Based on the data from strain gauges located on the pubic rami and near the sacroiliac joint, the pubic rami fractures were identified as occurring prior to the sacroiliac fractures. CONCLUSIONS Out of nine impactor tests performed, the PMHS S-I joint injuries were observed to consistently be associated with pelvic anterior arch fractures. In addition, from the injury sequences derived from strain gauges located on the specimen pelvises and on the injury assessments obtained by necropsy, the S-I joint fractures were observed to occur after the anterior arch fractures.
{"title":"A Comparison of Sacroiliac and Pubic Rami Fracture Occurrences in Oblique Side Impact Tests on Nine Post Mortem Human Subjects.","authors":"P. Petit, X. Trosseille, Mathieu Lebarbé, P. Baudrit, P. Potier, S. Compigne, M. Masuda, Akira Yamaoka, T. Yasuki, R. Douard","doi":"10.4271/2015-22-0002","DOIUrl":"https://doi.org/10.4271/2015-22-0002","url":null,"abstract":"UNLABELLED\u0000The WorldSID dummy can be equipped with both a pubic and a sacroiliac joint (S-I joint) loadcell. Although a pubic force criterion and the associated injury risk curve are currently available and used in regulation (ECE95, FMVSS214), as of today injury mechanisms, injury criteria, and injury assessment reference values are not available for the sacroiliac joint itself. The aim of this study was to investigate the sacroiliac joint injury mechanism. Three configurations were identified from full-scale car crashes conducted with the WorldSID 50th percentile male where the force passing through the pubis in all three tests was approximately 1500 N while the sacroiliac Fy/Mx peak values were 4500 N/50 Nm, 2400 N/130 Nm, and 5300 N/150 Nm, respectively. These tests were reproduced using a 150 kg guided probe impacting Post Mortem Human Subjects (PMHS) at 8 m/s, 5.4 m/s and 7.5 m/s. The shape and the orientation of the impacting face of the probe were selected to match the WorldSID pubic Fy and sacroiliac Fy/Mx loads of the three vehicle test configurations. Three PMHS were tested in each of the three configurations (nine PMHS in total).\u0000\u0000\u0000RESULTS\u0000In the first PMHS configuration, one specimen sustained an AIS 3 injury and one sustained an AIS 4 injury (an unstable pelvis with complete disruption of the posterior arch, a sacroiliac joint disruption associated with an iliac fracture, and a pubic symphysis separation). In the second configuration, all specimens sustained a fracture of the superior lateral iliac wing (AIS 2). In the third configuration, one specimen sustained a partial disruption of the anterior arch (AIS 2). Based on the data from strain gauges located on the pubic rami and near the sacroiliac joint, the pubic rami fractures were identified as occurring prior to the sacroiliac fractures.\u0000\u0000\u0000CONCLUSIONS\u0000Out of nine impactor tests performed, the PMHS S-I joint injuries were observed to consistently be associated with pelvic anterior arch fractures. In addition, from the injury sequences derived from strain gauges located on the specimen pelvises and on the injury assessments obtained by necropsy, the S-I joint fractures were observed to occur after the anterior arch fractures.","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"59 1","pages":"23-52"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70805834","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Light duty vehicles in the US are designed to meet and exceed regulatory standards, self-imposed industry agreements and safety rating tests conducted by NHTSA and IIHS. The evolution of side impact regulation in the US from 1973 to 2015 is discussed in the paper along with two key industry agreements in 2003 affecting design of restraint systems and structures for side impact protection. A combination of all the above influences shows that vehicles in the US are being designed to more demanding and comprehensive requirements than in any other region of the world. The crash environment in the US related to side impacts was defined based on data in the nationally representative crash database NASS. Crash environment factors, including the distribution of cars, light trucks and vans (LTV's), and medium-to-heavy vehicles (MHV's) in the fleet, and the frequency of their interactions with one another in side impacts, were considered. Other factors like, crash severity in terms of closing velocity between two vehicles involved in crash, gender and age of involved drivers in two-vehicle and single vehicle crashes, were also examined. Injury risks in side impacts to drivers and passengers were determined in various circumstances such as near-side, far-side, and single vehicle crashes as a function of crash severity, in terms of estimated closing speed or lateral delta-V. Also injury risks in different pairs of striking and struck cars and LTV's, were estimated. A logistic regression model for studying injury risks in two vehicle crashes was developed. The risk factors included in the model include case and striking vehicles, consisting of cars, SUV's, vans, and pickup trucks, delta-V, damage extent, occupant proximity to the impact side, age and gender of the occupant, and belt use. Results show that car occupants make up the vast majority of serious-to-fatally injured occupants. Injury rates of car occupants in two-vehicle collision are highest when the car is struck by a pickup and lowest when struck by a car. This was the case across all lateral delta-V ranges. Additionally, near-side injury rates are substantially higher than those in far-side impacts.
{"title":"Side Impact Regulatory Trends, Crash Environment and Injury Risk in the USA.","authors":"P. Prasad, D. Dalmotas, A. Chouinard","doi":"10.4271/2015-22-0004","DOIUrl":"https://doi.org/10.4271/2015-22-0004","url":null,"abstract":"Light duty vehicles in the US are designed to meet and exceed regulatory standards, self-imposed industry agreements and safety rating tests conducted by NHTSA and IIHS. The evolution of side impact regulation in the US from 1973 to 2015 is discussed in the paper along with two key industry agreements in 2003 affecting design of restraint systems and structures for side impact protection. A combination of all the above influences shows that vehicles in the US are being designed to more demanding and comprehensive requirements than in any other region of the world. The crash environment in the US related to side impacts was defined based on data in the nationally representative crash database NASS. Crash environment factors, including the distribution of cars, light trucks and vans (LTV's), and medium-to-heavy vehicles (MHV's) in the fleet, and the frequency of their interactions with one another in side impacts, were considered. Other factors like, crash severity in terms of closing velocity between two vehicles involved in crash, gender and age of involved drivers in two-vehicle and single vehicle crashes, were also examined. Injury risks in side impacts to drivers and passengers were determined in various circumstances such as near-side, far-side, and single vehicle crashes as a function of crash severity, in terms of estimated closing speed or lateral delta-V. Also injury risks in different pairs of striking and struck cars and LTV's, were estimated. A logistic regression model for studying injury risks in two vehicle crashes was developed. The risk factors included in the model include case and striking vehicles, consisting of cars, SUV's, vans, and pickup trucks, delta-V, damage extent, occupant proximity to the impact side, age and gender of the occupant, and belt use. Results show that car occupants make up the vast majority of serious-to-fatally injured occupants. Injury rates of car occupants in two-vehicle collision are highest when the car is struck by a pickup and lowest when struck by a car. This was the case across all lateral delta-V ranges. Additionally, near-side injury rates are substantially higher than those in far-side impacts.","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"59 1","pages":"91-112"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70805959","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Finite Element Human Body Models (HBM) have become powerful tools to study the response to impact. However, they are typically only developed for a limited number of sizes and ages. Various approaches driven by control points have been reported in the literature for the non-linear scaling of these HBM into models with different geometrical characteristics. The purpose of this study is to compare the performances of commonly used control points based interpolation methods in different usage scenarios. Performance metrics include the respect of target, the mesh quality and the runability. For this study, the Kriging and Moving Least square interpolation approaches were compared in three test cases. The first two cases correspond to changes of anthropometric dimensions of (1) a child model (from 6 to 1.5 years old) and (2) the GHBMC M50 model (Global Human Body Models Consortium, from 50th to 5th percentile female). For the third case, the GHBMC M50 ribcage was scaled to match the rib cage geometry derived from a CT-scan. In the first two test cases, all tested methods provided similar shapes with acceptable results in terms of time needed for the deformation (a few minutes at most), overall respect of the targets, element quality distribution and time step for explicit simulation. The personalization of rib cage proved to be much more challenging. None of the methods tested provided fully satisfactory results at the level of the rib trajectory and section. There were corrugated local deformations unless using a smooth regression through relaxation. Overall, the results highlight the importance of the target definition over the interpolation method.
{"title":"Comparison of Kriging and Moving Least Square Methods to Change the Geometry of Human Body Models.","authors":"E. Jolivet, Y. Lafon, P. Petit, P. Beillas","doi":"10.4271/2015-22-0013","DOIUrl":"https://doi.org/10.4271/2015-22-0013","url":null,"abstract":"Finite Element Human Body Models (HBM) have become powerful tools to study the response to impact. However, they are typically only developed for a limited number of sizes and ages. Various approaches driven by control points have been reported in the literature for the non-linear scaling of these HBM into models with different geometrical characteristics. The purpose of this study is to compare the performances of commonly used control points based interpolation methods in different usage scenarios. Performance metrics include the respect of target, the mesh quality and the runability. For this study, the Kriging and Moving Least square interpolation approaches were compared in three test cases. The first two cases correspond to changes of anthropometric dimensions of (1) a child model (from 6 to 1.5 years old) and (2) the GHBMC M50 model (Global Human Body Models Consortium, from 50th to 5th percentile female). For the third case, the GHBMC M50 ribcage was scaled to match the rib cage geometry derived from a CT-scan. In the first two test cases, all tested methods provided similar shapes with acceptable results in terms of time needed for the deformation (a few minutes at most), overall respect of the targets, element quality distribution and time step for explicit simulation. The personalization of rib cage proved to be much more challenging. None of the methods tested provided fully satisfactory results at the level of the rib trajectory and section. There were corrugated local deformations unless using a smooth regression through relaxation. Overall, the results highlight the importance of the target definition over the interpolation method.","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"59 1","pages":"337-57"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70806157","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
J. Uriot, P. Potier, P. Baudrit, X. Trosseille, P. Petit, Olivier Richard, S. Compigne, M. Masuda, R. Douard
Sled tests focused on pelvis behavior and submarining can be found in the literature. However, they were performed either with rigid seats or with commercial seats. The objective of this study was to get reference tests to assess the submarining ability of dummies in more realistic conditions than on rigid seat, but still in a repeatable and reproducible setup. For this purpose, a semi-rigid seat was developed, which mimics the behavior of real seats, although it is made of rigid plates and springs that are easy to reproduce and simulate with an FE model. In total, eight PMHS sled tests were performed on this semirigid seat to get data in two different configurations: first in a front seat configuration that was designed to prevent submarining, then in a rear seat configuration with adjusted spring stiffness to generate submarining. All subjects sustained extensive rib fractures from the shoulder belt loading. No pelvis fractures and no submarining were observed in the front seat configuration, but two subjects sustained lumbar vertebrae fractures. In the rear seat configuration, all subjects sustained pelvic fractures and demonstrated submarining. Corridors were constructed for the external forces and the PMHS kinematics. They are provided in this paper as new reference tests to assess the biofidelity of human surrogates in different configurations that either result in submarining or do not. In future, it is intended to analyze further seat and restraint system configurations to be able to define a submarining predictor.
{"title":"Reference PMHS Sled Tests to Assess Submarining.","authors":"J. Uriot, P. Potier, P. Baudrit, X. Trosseille, P. Petit, Olivier Richard, S. Compigne, M. Masuda, R. Douard","doi":"10.4271/2015-22-0008","DOIUrl":"https://doi.org/10.4271/2015-22-0008","url":null,"abstract":"Sled tests focused on pelvis behavior and submarining can be found in the literature. However, they were performed either with rigid seats or with commercial seats. The objective of this study was to get reference tests to assess the submarining ability of dummies in more realistic conditions than on rigid seat, but still in a repeatable and reproducible setup. For this purpose, a semi-rigid seat was developed, which mimics the behavior of real seats, although it is made of rigid plates and springs that are easy to reproduce and simulate with an FE model. In total, eight PMHS sled tests were performed on this semirigid seat to get data in two different configurations: first in a front seat configuration that was designed to prevent submarining, then in a rear seat configuration with adjusted spring stiffness to generate submarining. All subjects sustained extensive rib fractures from the shoulder belt loading. No pelvis fractures and no submarining were observed in the front seat configuration, but two subjects sustained lumbar vertebrae fractures. In the rear seat configuration, all subjects sustained pelvic fractures and demonstrated submarining. Corridors were constructed for the external forces and the PMHS kinematics. They are provided in this paper as new reference tests to assess the biofidelity of human surrogates in different configurations that either result in submarining or do not. In future, it is intended to analyze further seat and restraint system configurations to be able to define a submarining predictor.","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"40 1","pages":"203-23"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70806155","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Accurate prediction of occupant head kinematics is critical for better understanding of head/face injury mechanisms in side impacts, especially far-side occupants. In light of the fact that researchers have demonstrated that muscle activations, especially in neck muscles, can affect occupant head kinematics, a human body finite element (FE) model that considers muscle activation is useful for predicting occupant head kinematics in real-world automotive accidents. In this study, we developed a human body FE model called the THUMS (Total HUman Model for Safety) Version 5 that contains 262 one-dimensional (1D) Hill-type muscle models over the entire body. The THUMS was validated against 36 series of PMHS (Post Mortem Human Surrogate) and volunteer test data in this study, and 16 series of PMHS and volunteer test data on side impacts are presented. Validation results with force-time curves were also evaluated quantitatively using the CORA (CORrelation and Analysis) method. The validation results suggest that the THUMS has good biofidelity in the responses of the regional or full body for side impacts, but relatively poor biofidelity in its local level of responses such as brain displacements. Occupant kinematics predicted by the THUMS with a muscle controller using 22 PID (Proportional-Integral- Derivative) controllers were compared with those of volunteer test data on low-speed lateral impacts. The THUMS with muscle controller reproduced the head kinematics of the volunteer data more accurately than that without muscle activation, although further studies on validation of torso kinematics are needed for more accurate predictions of occupant head kinematics.
准确预测乘员头部运动学对于更好地理解侧面碰撞，特别是远侧乘员的头部/面部损伤机制至关重要。鉴于研究人员已经证明肌肉激活，特别是颈部肌肉的激活，可以影响乘员的头部运动学，因此考虑肌肉激活的人体有限元(FE)模型对于预测实际汽车事故中乘员的头部运动学是有用的。在这项研究中，我们开发了一个名为THUMS (Total human model for Safety)第5版的人体有限元模型，其中包含262个覆盖整个身体的一维(1D) hill型肌肉模型。在本研究中，THUMS与36个系列的PMHS (Post Mortem Human Surrogate)和志愿者测试数据进行了验证，并提供了16个系列的PMHS和志愿者测试数据。采用相关分析(CORA)方法对力-时间曲线的验证结果进行定量评价。验证结果表明，THUMS在局部或全身对副作用的反应中具有良好的生物保真度，但在局部水平(如脑位移)的反应中具有相对较差的生物保真度。利用22个PID(比例-积分-导数)控制器的肌肉控制器，将THUMS预测的乘员运动学与志愿者低速横向碰撞试验数据进行了比较。带有肌肉控制器的THUMS比没有肌肉激活的THUMS更准确地再现了志愿者的头部运动学数据，尽管需要进一步研究躯干运动学的有效性，以更准确地预测乘员的头部运动学。
{"title":"Development and Validation of the Total HUman Model for Safety (THUMS) Version 5 Containing Multiple 1D Muscles for Estimating Occupant Motions with Muscle Activation During Side Impacts.","authors":"M. Iwamoto, Yuko Nakahira","doi":"10.4271/2015-22-0003","DOIUrl":"https://doi.org/10.4271/2015-22-0003","url":null,"abstract":"Accurate prediction of occupant head kinematics is critical for better understanding of head/face injury mechanisms in side impacts, especially far-side occupants. In light of the fact that researchers have demonstrated that muscle activations, especially in neck muscles, can affect occupant head kinematics, a human body finite element (FE) model that considers muscle activation is useful for predicting occupant head kinematics in real-world automotive accidents. In this study, we developed a human body FE model called the THUMS (Total HUman Model for Safety) Version 5 that contains 262 one-dimensional (1D) Hill-type muscle models over the entire body. The THUMS was validated against 36 series of PMHS (Post Mortem Human Surrogate) and volunteer test data in this study, and 16 series of PMHS and volunteer test data on side impacts are presented. Validation results with force-time curves were also evaluated quantitatively using the CORA (CORrelation and Analysis) method. The validation results suggest that the THUMS has good biofidelity in the responses of the regional or full body for side impacts, but relatively poor biofidelity in its local level of responses such as brain displacements. Occupant kinematics predicted by the THUMS with a muscle controller using 22 PID (Proportional-Integral- Derivative) controllers were compared with those of volunteer test data on low-speed lateral impacts. The THUMS with muscle controller reproduced the head kinematics of the volunteer data more accurately than that without muscle activation, although further studies on validation of torso kinematics are needed for more accurate predictions of occupant head kinematics.","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"59 1","pages":"53-90"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70805883","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. Danelson, A. Kemper, M. Mason, M. Tegtmeyer, Sean A Swiatkowski, J. Bolte, W. Hardy
A blast buck (Accelerative Loading Fixture, or ALF) was developed for studying underbody blast events in a laboratory-like setting. It was designed to provide a high-magnitude, high-rate, vertical loading environment for cadaver and dummy testing. It consists of a platform with a reinforcing cage that supports adjustable-height rigid seats for two crew positions. The platform has a heavy frame with a deformable floor insert. Fourteen tests were conducted using fourteen PMHS (post mortem human surrogates) and the Hybrid III ATD (Anthropomorphic Test Device). Tests were conducted at two charge levels: enhanced and mild. The surrogates were tested with and without PPE (Personal Protective Equipment), and in two different postures: nominal (knee angle of 90°) and obtuse (knee angle of 120°). The ALF reproduces damage in the PMHS commensurate with injuries experienced in theater, with the most common damage being to the pelvis and ankle. Load is transmitted through the surrogates in a caudal-to-cranial sequential fashion. Damage to the PMHS lower extremities begins within 2 ms after the initiation of foot/floor motion. The Hybrid III cannot assume the posture of the PMHS in rigid seats and exhibits a stiffer overall response compared to the PMHS. The ATD does not mimic the kinematic response of the PMHS lower extremities. Further, the Hybrid III does not have the capability to predict the potential for injury in the high-rate, vertical loading environment. A new ATD dedicated to under-body blast is needed to assist in the effort to mitigate injuries sustained by the mounted soldier.
开发了一种爆炸buck(加速加载夹具，简称ALF)，用于在类似实验室的环境中研究体下爆炸事件。它旨在为尸体和假人测试提供高强度，高速率，垂直加载环境。它由一个带有加强笼的平台组成，该平台支持两个船员位置的可调高度刚性座椅。该平台有一个带有可变形地板嵌件的重型框架。使用14个PMHS(死后人类替代品)和Hybrid III ATD(拟人试验装置)进行了14次试验。试验在两种电荷水平下进行:增强和轻度。实验中，受试者分别佩戴和不佩戴PPE(个人防护装备)，并以两种不同的姿势进行测试:名义(膝关节角度为90°)和钝角(膝关节角度为120°)。ALF在PMHS中再现的损伤与剧院中经历的损伤相当，最常见的损伤是骨盆和脚踝。负荷通过替代物以尾端到颅骨的顺序方式传递。脚/地板运动开始后2毫秒内开始对PMHS下肢的损伤。混合III不能承担PMHS在刚性座椅的姿势，并表现出与PMHS相比更硬的整体响应。ATD不模拟PMHS下肢的运动学响应。此外，Hybrid III不具备在高速垂直载荷环境下预测潜在伤害的能力。需要一种专门用于车体下爆炸的新型ATD，以帮助减轻骑乘士兵所受的伤害。
{"title":"Comparison of ATD to PMHS Response in the Under-Body Blast Environment.","authors":"K. Danelson, A. Kemper, M. Mason, M. Tegtmeyer, Sean A Swiatkowski, J. Bolte, W. Hardy","doi":"10.4271/2015-22-0017","DOIUrl":"https://doi.org/10.4271/2015-22-0017","url":null,"abstract":"A blast buck (Accelerative Loading Fixture, or ALF) was developed for studying underbody blast events in a laboratory-like setting. It was designed to provide a high-magnitude, high-rate, vertical loading environment for cadaver and dummy testing. It consists of a platform with a reinforcing cage that supports adjustable-height rigid seats for two crew positions. The platform has a heavy frame with a deformable floor insert. Fourteen tests were conducted using fourteen PMHS (post mortem human surrogates) and the Hybrid III ATD (Anthropomorphic Test Device). Tests were conducted at two charge levels: enhanced and mild. The surrogates were tested with and without PPE (Personal Protective Equipment), and in two different postures: nominal (knee angle of 90°) and obtuse (knee angle of 120°). The ALF reproduces damage in the PMHS commensurate with injuries experienced in theater, with the most common damage being to the pelvis and ankle. Load is transmitted through the surrogates in a caudal-to-cranial sequential fashion. Damage to the PMHS lower extremities begins within 2 ms after the initiation of foot/floor motion. The Hybrid III cannot assume the posture of the PMHS in rigid seats and exhibits a stiffer overall response compared to the PMHS. The ATD does not mimic the kinematic response of the PMHS lower extremities. Further, the Hybrid III does not have the capability to predict the potential for injury in the high-rate, vertical loading environment. A new ATD dedicated to under-body blast is needed to assist in the effort to mitigate injuries sustained by the mounted soldier.","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"59 1","pages":"445-520"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70806385","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Samantha L. Schoell, A. Weaver, J. Urban, Derek Jones, Joel Stitzel, Eunjoo Hwang, M. Reed, J. Rupp, Jingwen Hu
The aging population is a growing concern as the increased fragility and frailty of the elderly results in an elevated incidence of injury as well as an increased risk of mortality and morbidity. To assess elderly injury risk, age-specific computational models can be developed to directly calculate biomechanical metrics for injury. The first objective was to develop an older occupant Global Human Body Models Consortium (GHBMC) average male model (M50) representative of a 65 year old (YO) and to perform regional validation tests to investigate predicted fractures and injury severity with age. Development of the GHBMC M50 65 YO model involved implementing geometric, cortical thickness, and material property changes with age. Regional validation tests included a chest impact, a lateral impact, a shoulder impact, a thoracoabdominal impact, an abdominal bar impact, a pelvic impact, and a lateral sled test. The second objective was to investigate age-related injury risks by performing a frontal US NCAP simulation test with the GHBMC M50 65 YO and the GHBMC M50 v4.2 models. Simulation results were compared to the GHBMC M50 v4.2 to evaluate the effect of age on occupant response and risk for head injury, neck injury, thoracic injury, and lower extremity injury. Overall, the GHBMC M50 65 YO model predicted higher probabilities of AIS 3+ injury for the head and thorax.
{"title":"Development and Validation of an Older Occupant Finite Element Model of a Mid-Sized Male for Investigation of Age-related Injury Risk.","authors":"Samantha L. Schoell, A. Weaver, J. Urban, Derek Jones, Joel Stitzel, Eunjoo Hwang, M. Reed, J. Rupp, Jingwen Hu","doi":"10.4271/2015-22-0014","DOIUrl":"https://doi.org/10.4271/2015-22-0014","url":null,"abstract":"The aging population is a growing concern as the increased fragility and frailty of the elderly results in an elevated incidence of injury as well as an increased risk of mortality and morbidity. To assess elderly injury risk, age-specific computational models can be developed to directly calculate biomechanical metrics for injury. The first objective was to develop an older occupant Global Human Body Models Consortium (GHBMC) average male model (M50) representative of a 65 year old (YO) and to perform regional validation tests to investigate predicted fractures and injury severity with age. Development of the GHBMC M50 65 YO model involved implementing geometric, cortical thickness, and material property changes with age. Regional validation tests included a chest impact, a lateral impact, a shoulder impact, a thoracoabdominal impact, an abdominal bar impact, a pelvic impact, and a lateral sled test. The second objective was to investigate age-related injury risks by performing a frontal US NCAP simulation test with the GHBMC M50 65 YO and the GHBMC M50 v4.2 models. Simulation results were compared to the GHBMC M50 v4.2 to evaluate the effect of age on occupant response and risk for head injury, neck injury, thoracic injury, and lower extremity injury. Overall, the GHBMC M50 65 YO model predicted higher probabilities of AIS 3+ injury for the head and thorax.","PeriodicalId":35289,"journal":{"name":"Stapp car crash journal","volume":"59 1","pages":"359-83"},"PeriodicalIF":0.0,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70806576","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：