Capacity enhancement and operational flexibility are two of the important limitations of the centralized shunt APF () unit. These limitations can be conquered by the operation of multiple APF units in parallel and connected back to back by a common DC link capacitor. In that case, a circulating current (CC) flows within the units. This CC flow becomes out of control when the units operate in hysteresis based current controlled mode. One of the difficulties of this CC flow control or reduction is the variable switching frequency of the units. In this paper, the model for CC flow is derived by the switching dynamics study of the units. It is found that the selection of design parameters plays an important role in the amount of CC flow. Detailed simulation, analysis, and real-time performance show how the selection of design parameters affects the CC flow and the reduction of CC flow can also be achieved at an acceptable level by the proper selection of design parameters.
{"title":"Selection of Design Parameters to Reduce the Zero-Sequence Circulating Current Flow in Parallel Operation of DC Linked Multiple Shunt APF Units","authors":"S. Khadem, M. Basu, M. Conlon","doi":"10.1155/2013/381581","DOIUrl":"https://doi.org/10.1155/2013/381581","url":null,"abstract":"Capacity enhancement and operational flexibility are two of the important limitations of the centralized shunt APF () unit. These limitations can be conquered by the operation of multiple APF units in parallel and connected back to back by a common DC link capacitor. In that case, a circulating current (CC) flows within the units. This CC flow becomes out of control when the units operate in hysteresis based current controlled mode. One of the difficulties of this CC flow control or reduction is the variable switching frequency of the units. In this paper, the model for CC flow is derived by the switching dynamics study of the units. It is found that the selection of design parameters plays an important role in the amount of CC flow. Detailed simulation, analysis, and real-time performance show how the selection of design parameters affects the CC flow and the reduction of CC flow can also be achieved at an acceptable level by the proper selection of design parameters.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-12-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121860779","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Umashankar, Mandar M. Bhalekar, Surabhi Chandra, D. Vijayakumar, D. Kothari
This paper presents the research platform for real-time digital simulation applications which replaces the requirement for full-scale or partial-scale validation of physical systems. To illustrate this, a three-phase AC-DC-AC converter topology has been used consists of diode rectifier, DC link, and an IGBT inverter with inductive load. In this topology, rectifier as well as inverter decoupled and solved separately using decoupled method, which results in the reduced order system so that it is easy to solve the state equation. This method utilizes an analytical approach to formulate the state equations, and interpolation methods have been implemented to rectify the zero-crossing errors, with fixed step size of 100 μsec is used. The proposed algorithm and the model have been validated using MATLAB simulation as m-file program and also in real-time DSP controller domain. The performance of the real-time system model is evaluated based on accuracy, zero crossing, and step size.
{"title":"Development of a New Research Platform for Electrical Drive System Modelling for Real-Time Digital Simulation Applications","authors":"S. Umashankar, Mandar M. Bhalekar, Surabhi Chandra, D. Vijayakumar, D. Kothari","doi":"10.1155/2013/719847","DOIUrl":"https://doi.org/10.1155/2013/719847","url":null,"abstract":"This paper presents the research platform for real-time digital simulation applications which replaces the requirement for full-scale or partial-scale validation of physical systems. To illustrate this, a three-phase AC-DC-AC converter topology has been used consists of diode rectifier, DC link, and an IGBT inverter with inductive load. In this topology, rectifier as well as inverter decoupled and solved separately using decoupled method, which results in the reduced order system so that it is easy to solve the state equation. This method utilizes an analytical approach to formulate the state equations, and interpolation methods have been implemented to rectify the zero-crossing errors, with fixed step size of 100 μsec is used. The proposed algorithm and the model have been validated using MATLAB simulation as m-file program and also in real-time DSP controller domain. The performance of the real-time system model is evaluated based on accuracy, zero crossing, and step size.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-08-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128796827","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
E. Fiorucci, G. Bucci, F. Ciancetta, D. Gallo, C. Landi, M. Luiso
The significant advances in power electronics have permitted the implementation of sophisticated methods for control of electric motors. Each innovative electrical apparatus for industrial and automotive application must be correctly and exhaustively tested, both during the developing process and finally for the compliance test. The development of a new electrical system should be associated with a parallel design of an ad hoc measurement system, whose performance should be defined according to the features of the system under test. In recent years, the increasing interest for sensorless electric motor drives involved the development and implementation of a wide set of control techniques. This paper reviews the state and the trends of measurement techniques and instruments applied for the experimental characterization of variable speed drives.
{"title":"Variable Speed Drive Characterization: Review of Measurement Techniques and Future Trends","authors":"E. Fiorucci, G. Bucci, F. Ciancetta, D. Gallo, C. Landi, M. Luiso","doi":"10.1155/2013/968671","DOIUrl":"https://doi.org/10.1155/2013/968671","url":null,"abstract":"The significant advances in power electronics have permitted the implementation of sophisticated methods for control of electric motors. Each innovative electrical apparatus for industrial and automotive application must be correctly and exhaustively tested, both during the developing process and finally for the compliance test. The development of a new electrical system should be associated with a parallel design of an ad hoc measurement system, whose performance should be defined according to the features of the system under test. In recent years, the increasing interest for sensorless electric motor drives involved the development and implementation of a wide set of control techniques. This paper reviews the state and the trends of measurement techniques and instruments applied for the experimental characterization of variable speed drives.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"101 10‐12","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132339645","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A topology named L-LC resonant inverter (RI) for induction heating (IH) applications takes most of the merits of the conventional series and parallel resonant schemes, while eliminating their limitations. In this paper, fundamental frequency AC analysis of L-LC RI is revisited, and a new operating point is suggested featuring enhanced current gain and near in-phase operation as compared to the conventional operating point. An approximate analysis of the circuit with square-wave voltage source is also described highlighting the effect of auxiliary inductor on the source current waveform. The analysis also leads to an optimum choice of the auxiliary inductance. The requirements of the metal organic vapour phase epitaxy (MOVPE) system in which a graphite susceptor is required to be heated to 1200°C demanding a 25 kW, 25 kHz IH power supply, the configuration of developed IH system, and experimental results are presented.
{"title":"A 25 kW, 25 kHz Induction Heating Power Supply for MOVPE System Using L-LC Resonant Inverter","authors":"M. Borage, S. Tiwari","doi":"10.1155/2013/584129","DOIUrl":"https://doi.org/10.1155/2013/584129","url":null,"abstract":"A topology named L-LC resonant inverter (RI) for induction heating (IH) applications takes most of the merits of the conventional series and parallel resonant schemes, while eliminating their limitations. In this paper, fundamental frequency AC analysis of L-LC RI is revisited, and a new operating point is suggested featuring enhanced current gain and near in-phase operation as compared to the conventional operating point. An approximate analysis of the circuit with square-wave voltage source is also described highlighting the effect of auxiliary inductor on the source current waveform. The analysis also leads to an optimum choice of the auxiliary inductance. The requirements of the metal organic vapour phase epitaxy (MOVPE) system in which a graphite susceptor is required to be heated to 1200°C demanding a 25 kW, 25 kHz IH power supply, the configuration of developed IH system, and experimental results are presented.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"2013 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-07-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130487325","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Eliminating the specific harmonics especially low-order harmonics of the output voltage of 9-level inverter using SHE-PWM control scheme is investigated. Harmonic minimization is the intricate optimization problems because the nonlinear transcendental equations have multiple local optima. Increasing the degrees of freedom in the suggested method means that the number of switching angles increases. The suggested method is able to eliminate high number of undesired harmonics. As the number of switching angles increases, using either traditional iterative techniques or resultant theory method gets useless. In this paper to overcome this problem the imperialist competitive algorithm (ICA) is used. Also a DC-DC converter is used to enhance the SHE performance in the range for which the conventional SHE methods do not have any solution. Experimental and simulation results of a 9-level inverter show that the proposed method effectively minimizes a large number of particular harmonics so the total harmonics distortion of output voltage will be lower.
{"title":"Implementation of Novel Technique for Selective Harmonic Elimination in Multilevel Inverters Based on ICA","authors":"A. Ajami, M. J. Oskuee, Ataollah Mokhberdoran","doi":"10.1155/2013/847365","DOIUrl":"https://doi.org/10.1155/2013/847365","url":null,"abstract":"Eliminating the specific harmonics especially low-order harmonics of the output voltage of 9-level inverter using SHE-PWM control scheme is investigated. Harmonic minimization is the intricate optimization problems because the nonlinear transcendental equations have multiple local optima. Increasing the degrees of freedom in the suggested method means that the number of switching angles increases. The suggested method is able to eliminate high number of undesired harmonics. As the number of switching angles increases, using either traditional iterative techniques or resultant theory method gets useless. In this paper to overcome this problem the imperialist competitive algorithm (ICA) is used. Also a DC-DC converter is used to enhance the SHE performance in the range for which the conventional SHE methods do not have any solution. Experimental and simulation results of a 9-level inverter show that the proposed method effectively minimizes a large number of particular harmonics so the total harmonics distortion of output voltage will be lower.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-06-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131260529","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The renewable energy systems (RESs) are an attractive option to electrify the community as they are environment friendly, free of cost, and all-pervading. The efficiency of these energy systems is very low and can be improved by integrating them in parallel. In this paper, hydro (7.5 kW) and solar systems (10 kW) are taken as RESs and connected with the utility grid. Due to the intermittent nature of both the hydro and photovoltaic energy sources, utility grid is connected to the system for ensuring the continuous power flow. The hydro power generation system uses the self excited induction generator (SEIG) and converters. The AC/DC/AC converter is used as interface to connect the hydro turbine to the utility grid to adjust the generated voltage to the utility grid voltage. The solar generation system is the combination of PV array, boost converter, and solar inverter. The control of both the hydro and solar power plants is provided through the constant current controller. The analysis has been done to verify the existence of the proposed system. Results demonstrate that the proposed system is able to be put into service and can feed the community.
{"title":"Performance Analysis of Grid Integrated Hydro and Solar Based Hybrid Systems","authors":"Sweeka Meshram, G. Agnihotri, Sushma Gupta","doi":"10.1155/2013/697049","DOIUrl":"https://doi.org/10.1155/2013/697049","url":null,"abstract":"The renewable energy systems (RESs) are an attractive option to electrify the community as they are environment friendly, free of cost, and all-pervading. The efficiency of these energy systems is very low and can be improved by integrating them in parallel. In this paper, hydro (7.5 kW) and solar systems (10 kW) are taken as RESs and connected with the utility grid. Due to the intermittent nature of both the hydro and photovoltaic energy sources, utility grid is connected to the system for ensuring the continuous power flow. The hydro power generation system uses the self excited induction generator (SEIG) and converters. The AC/DC/AC converter is used as interface to connect the hydro turbine to the utility grid to adjust the generated voltage to the utility grid voltage. The solar generation system is the combination of PV array, boost converter, and solar inverter. The control of both the hydro and solar power plants is provided through the constant current controller. The analysis has been done to verify the existence of the proposed system. Results demonstrate that the proposed system is able to be put into service and can feed the community.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-06-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127563485","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Results from the magnetization of an 80 kVA power transformer, using a directly coupled nonfiltered three-phase voltage-source inverter (VSI), are presented. The major benefits of this topology are reduction in switching filter size as well as filter losses. Drawbacks include higher stress on the transformer windings and higher transformer magnetization losses. In this paper, the total magnetization losses are presented for different voltage levels. The transformer has been magnetized with the rated frequency of 50 Hz at various voltage levels. The saturation characteristics as well as the magnetizing resistance are derived as functions of the voltage. These are used as inputs for the simulations. The magnetization losses have been experimentally measured and simulated for three different DC levels. Results from the simulations show good agreement with the experimental results. As expected, the pulsed voltage waveforms generate larger magnetization losses than the corresponding 50 Hz case. The losses are strongly dependent on the DC level.
{"title":"Transformer Magnetization Losses Using a Nonfiltered Voltage-Source Inverter","authors":"Rickard Ekström, Senad Apelfröjd, M. Leijon","doi":"10.1155/2013/261959","DOIUrl":"https://doi.org/10.1155/2013/261959","url":null,"abstract":"Results from the magnetization of an 80 kVA power \u0000transformer, using a directly coupled nonfiltered three-phase \u0000voltage-source inverter (VSI), are presented. The major benefits \u0000of this topology are reduction in switching filter size as well as \u0000filter losses. Drawbacks include higher stress on the transformer \u0000windings and higher transformer magnetization losses. In this \u0000paper, the total magnetization losses are presented for different \u0000voltage levels. The transformer has been magnetized with the \u0000rated frequency of 50 Hz at various voltage levels. The saturation \u0000characteristics as well as the magnetizing resistance are derived \u0000as functions of the voltage. These are used as inputs for the \u0000simulations. The magnetization losses have been experimentally \u0000measured and simulated for three different DC levels. Results \u0000from the simulations show good agreement with the experimental \u0000results. As expected, the pulsed voltage waveforms generate \u0000larger magnetization losses than the corresponding 50 Hz case. The losses are strongly dependent on the DC level.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"44 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-05-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126819303","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Distributed generation (DG) is deeply changing the existing distribution networks which become very sophisticated and complex incorporating both active and passive equipment. The simplification of their management can be obtained assuming a structure with small networks, namely, microgrids, reproducing, in a smaller scale, the structure of large networks including production, transmission, and distribution of the electrical energy. Power converters in distributed generation systems carry on some different ancillary functions as, for example, grid synchronization, islanding detection, fault ride through, and so on. In view of an optimal utilization of the generated electrical power, fault tolerant operation is to be considered as a suitable ancillary function for the next future. This paper presents a complete modeling of fault tolerant inverters able to simulate the main fault type occurrence and a control algorithm for fault tolerant converters suitable for microgrids. After the model description, formulated in terms of healthy device and leg binary variables, and the illustration of the fault tolerant control strategy, the paper shows how the control preserves power quality when the converter works in the linear range. The effectiveness of the proposed approach and control is shown through computer simulations and experimental results.
{"title":"Fault Tolerant Ancillary Function of Power Converters in Distributed Generation Power System within a Microgrid Structure","authors":"A. Tommaso, F. Genduso, R. Miceli, G. R. Galluzzo","doi":"10.1155/2013/625130","DOIUrl":"https://doi.org/10.1155/2013/625130","url":null,"abstract":"Distributed generation (DG) is deeply changing the existing distribution networks which become very sophisticated and complex incorporating both active and passive equipment. The simplification of their management can be obtained assuming a structure with small networks, namely, microgrids, reproducing, in a smaller scale, the structure of large networks including production, transmission, and distribution of the electrical energy. Power converters in distributed generation systems carry on some different ancillary functions as, for example, grid synchronization, islanding detection, fault ride through, and so on. In view of an optimal utilization of the generated electrical power, fault tolerant operation is to be considered as a suitable ancillary function for the next future. This paper presents a complete modeling of fault tolerant inverters able to simulate the main fault type occurrence and a control algorithm for fault tolerant converters suitable for microgrids. After the model description, formulated in terms of healthy device and leg binary variables, and the illustration of the fault tolerant control strategy, the paper shows how the control preserves power quality when the converter works in the linear range. The effectiveness of the proposed approach and control is shown through computer simulations and experimental results.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"2013 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-05-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128969988","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Different energy sources and converters need to be integrated with each other for extended usage of alternative energy, in order to meet sustained load demands during various weather conditions. The objective of this paper is to associate photovoltaic generators, fuel cells, and electrolysers. Here, to sustain the power demand and solve the energy storage problem, electrical energy can be stored in the form of hydrogen. By using an electrolyser, hydrogen can be generated and stored for future use. The hydrogen produced by the electrolyser using PV power is used in the FC system and acts as an energy buffer. Thus, the effects of reduction and even the absence of the available power from the PV system can be easily tackled. Modeling and simulations are performed using MATLAB/Simulink and SimPowerSystems packages and results are presented to verify the effectiveness of the proposed system.
{"title":"Modeling, Control, and Simulation of a Solar Hydrogen/Fuel Cell Hybrid Energy System for Grid-Connected Applications","authors":"Tourkia Lajnef, S. Abid, A. Ammous","doi":"10.1155/2013/352765","DOIUrl":"https://doi.org/10.1155/2013/352765","url":null,"abstract":"Different energy sources and converters need to be integrated with each other for extended usage of alternative energy, in order to meet sustained load demands during various weather conditions. The objective of this paper is to associate photovoltaic generators, fuel cells, and electrolysers. Here, to sustain the power demand and solve the energy storage problem, electrical energy can be stored in the form of hydrogen. By using an electrolyser, hydrogen can be generated and stored for future use. The hydrogen produced by the electrolyser using PV power is used in the FC system and acts as an energy buffer. Thus, the effects of reduction and even the absence of the available power from the PV system can be easily tackled. Modeling and simulations are performed using MATLAB/Simulink and SimPowerSystems packages and results are presented to verify the effectiveness of the proposed system.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-04-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129096302","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
New hybrid model for efficiency optimization of induction motor drives (IMD) is presented in this paper. It combines two strategies for efficiency optimization: loss model control and search control. Search control technique is used in a steady state of drive and loss model during transient processes. As a result, power and energy losses are reduced, especially when load torque is significant less related to its rated value. Also, this hybrid method gives fast convergence to operating point of minimal power losses and shows negligible sensitivity to motor parameter changes regarding other published optimization strategies. This model is implemented in vector control induction motor drive. Simulations and experimental tests are performed. Results are presented in this paper.
{"title":"Simple Hybrid Model for Efficiency Optimization of Induction Motor Drives with Its Experimental Validation","authors":"B. Blanusa, B. Knezevic","doi":"10.1155/2013/371842","DOIUrl":"https://doi.org/10.1155/2013/371842","url":null,"abstract":"New hybrid model for efficiency optimization of induction motor drives (IMD) is presented in this paper. It combines two strategies for efficiency optimization: loss model control and search control. Search control technique is used in a steady state of drive and loss model during transient processes. As a result, power and energy losses are reduced, especially when load torque is significant less related to its rated value. Also, this hybrid method gives fast convergence to operating point of minimal power losses and shows negligible sensitivity to motor parameter changes regarding other published optimization strategies. This model is implemented in vector control induction motor drive. Simulations and experimental tests are performed. Results are presented in this paper.","PeriodicalId":412593,"journal":{"name":"Advances in Power Electronic","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-03-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116304375","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：