Acta odontologica latinoamericana : AOL最新文献

The aim of this study was to compare the capacity of two reciprocating NiTi instruments in removing gutta-percha/sealer material from simulated curved root canals (SCRC). The time required for filling material removal was also recorded. Twenty SCRCs were divided into two groups of 10 (n=10) samples each. In Group 1, the SCRC were prepared to a R25 Reciproc Blue instrument (RCPB; VDW, Munich, Germany). In Group 2 the SCRC were prepared to a Primary WaveOne Gold instrument (PWOG; Dentsply, Ballaigues, Switzerland). In both groups, the canals were filled with matched-taper single gutta-percha cones and AH Plus sealer. Filling materials were removed with R25 RCPB (Group 1) and PWOG (Group 2). The amount of remaining gutta-percha/sealer was calculated at three predetermined levels of evaluation located at 2, 6 and 10 mm from the WL and expressed in percentages. Canals re-treated with RCPB contained significantly less remaining gutta-percha/sealer compared tocanalspreparedwith PWOG (P=0.02). The RCPB instruments required significantly less time to complete the retreatment procedures (P<0.01). No unwinding or instrument separation was noted. RCPB instruments removed significantly more gutta-percha/sealer from simulated curved root canals than PWOG. However, neither of the tested instruments completely removed all filling materials.

The aim of this study was to determine color change after accelerated artificial ageing (AAA) of different composite cements that are used with veneers. Five cylindrical test specimens, 15 mm in diameter and 2 mm thick, were made from a single layer of each of the following: RelyX Veneer 3M ESPE (RX), Paracore White Coltene (PC), Solocem White Opaque Coltene (SO), Resin Duo Cement Densell (DC), Panavia V5 Paste Kuraray Noritake (PA) and Panavia F2.0 Kuraray Noritake (PF) (30 specimens altogether). The specimens were light cured following manufacturers' instructions using a Coltolux LED (Coltene) unit. Initial color was determined using an Easyshade - Vita Zahnfabrik Spectrophotometer. Then, the specimens were subjected to AAA for two weeks (336 hours) with cycles of 4 hours of UV light at 60 °C and 4 hours of vapor condensation at 50 °C, successively, after which color was recorded again. Color change was determined for each specimen according to the differenceinshadeon the Vita scale before and after AAA. Results were analyzed using Kruskal Wallis test. Mean and standard deviation for each group were: RX 8.40 (1.52); PC 8.60 (3.13); SO 6.40 (3.51); DC 10.00 (0.00); PA 7.60 (3.29); PF 2.00 (0.00). The Kruskal Wallis test showed significant difference for material (p<0.05), and comparison of means showed difference between Panavia F2.0 and the other materials. A table providing equivalence between the Vita Classic and CIELAB scales was used to transfer the recorded colors to the CIELAB scale, and the color difference ΔE was calculated for each group, where ΔL, Δa and Δb are the differences in the L, a and b values before and after the AAA. The mean and standard deviation were analyzed statistically by the ANOVA test and Tukey's test. Mean and standard deviation for each group were: RX 14.94 (2.02); PC 14.51 (4.02); SO 12.08 (4.53); DC 16.31 (0.00); PA 10.9 (3.38); PF 7.24 (0.00). The ANOVA test showed significantdifferenceformaterial (p<0.05). Tukey's test showed two groups (PF-DC, RX, PA). Under the experimental conditions of this study, it can be concluded that accelerated ageing significantly affects the color stability of the resin based cements tested.

In Peru, there is low dental service use among older adults, in addition to a social gradient for use. Furthermore, the COVID-19 pandemic triggered complex scenarios characterized by inadequate access to health services, with greater impact on vulnerable population groups such as the elderly. The aim of this study was to determine the impact of the COVID-19 pandemic on the time since last dental care visit among elderly Peruvians. It was a cross-sectional study conducted on a population of 5247 respondents in 2019, and 5066 respondents in 2020. The study considered the answers of people who responded to the question on the last time they had received dental care, extracting a total 4045 subjects for 2019 and 3943 for 2020. The dependent variable was time since last dental care measured in years, while the variables on health, geographic and sociodemographic characteristics were grouped within three dimensions. A descriptive bivariate and multivariateanalysiswasapplied by means of multiple linear regression to analyze the behavior of the variables. Time since the last dental care visit was 7.93 years (SD=8.03) in 2019 and 7.94 years (SD=7.28) in 2020. A hierarchical multiple linear regression analysis was performed, where no variable in the 2019 model was significant; while for 2020, health, geographic, and sociodemographic characteristics variables were significant. In the analysis where the 'year' variable becomes independent, only model 4, which considers all variables, was valid (p=0.018). The variables 'area of residence' and 'wealth index' were also significant. To conclude, the 2020 pandemic year for COVID-19 had no impact on the time since last dental care visit among elderly Peruvians, though factors such as area of residence and wealth index were found to be associated with the time since last dental care visit.

The aim of this study is to compare the efficacy of two methods for collecting saliva samples from infants under 2 years of age for cariogenic streptococci (CS) count. Two collection methods were applied in 11 infants. In Method (A), saliva samples were collected by swabbing the inner cheek mucosa and floor of the mouth in figure of eight motions with a sterile cotton swab until it was soaked. In method (B), saliva samples were collected by aspiration of 1 ml of saliva with a sterile plastic syringe on the floor of the mouth, after stimulation with glove. The samples were cultured in modified Gold's broth (MSMG), and on trypticase, yeast extract, sucrose, cystine and bacitracin culture medium (TYSCB). In method (A), the swab with the sample was unloaded in situ on TYSCB and placed in PBS medium for transport. Then, 100 μl of the eluate was seeded in MSMG. In method (B) 100 μl were seeded in TYSCB and 100 μl in MSMG. Both culture media were incubatedundercapnophilicconditions for 48 hours at 37 °C. Colony forming units (CFU/ml) were counted by calibrated operators (kappa = 0.75). The presence of cariogenic streptococci (CS) (Streptococcus mutans-Streptococcus sobrinus) was determined by qPCR in the samples collected by both methods. The CFU/ml counts in MSMG differed significantly between methods (p = 0.021). In TYSCB, the recovery of CFU/ml was higher in method (A), without significant difference (p = 0.705). The molecular technique detected presence of CS, with no difference between collection methods. Collecting saliva samples by swabbing proved more effective in terms of recovery of microorganisms, and did not affect the detection of presence of CS by molecular techniques.

The aim of this study was to determine the difference between real age (RA) and dental age (DA) in boys and girls from the Autonomous City of Buenos Aires (C.A.B.A.) by analyzing digital panoramic radiographs from the database of the Imaging Department at the Buenos Aires University School of Dentistry, using the Demirjian Method (DM). The sample consisted of 508 panoramic radiographs of 6- to 14-year old Argentines (268 female and 240 male). The Demirjian method was used to estimate dental age from each panoramic radiograph, and the Wilcoxon test was applied to perform a comparative analysis with the real age recorded in the image database. Average RA was 9.36 years (SD 2.11), and average DA according to the Demirjian method was 10.45 years (SD 2.31). For females, RA was 9.25 (SD 2.12), and DA according to the DM was 10.40 years (SD 2.41). For males, RA was 9.46 (SD 2.10), and DA according to the DM was 10.50 years (SD 2.22). An inter-classcorrelationcoefficient(ICC) calculated as a correlation measure between dental age and real age was ICC = 1.09%. The ICC was 1.04% for the males and 1.15% for females. Significant differences were found between DA and RA (p<0.01) in general and according to sex. Real age was found to be lower than dental age in the study population from Buenos Aires City.

Cyberchondria is a psychopathological behavior that affects people who compulsively consult the internet, by searching the symptoms of different pathologies from which they believe they are suffering, and when influenced by what they read, are sure they have some of these diseases. The aim of this study was to assess the cyberchondria level and associated factors among Brazilian and Portuguese dentists. A total 597 Brazilian and Portuguese dentists participated in this cross-sectional study. They were contacted via WhatsApp and asked to complete an online questionnaire on the Google Forms platform, from January 17 to 31, 2021, during the COVID-19 pandemic. Sociodemographic information was collected and cyberchondria was measured using the Portuguese language version of the Cyberchondria Severity Scale. Binary logistic regression models were used to estimate the unadjusted and adjusted Odds Ratio (OR) and corresponding 95% confidence interval (CI) for theassociationofcyberchondria and covariates. Each covariate was individually included in the regression model, and the unadjusted OR (95% CI) was estimated. Most participants were Brazilian (62.8%), women (75.5%), married (60.5%) and with children (55.6%). Average age was 42.1 years (+ 12.5). In the final model, it was found that with each increase of one year in age, the chance of a high level of cyberchondria decreased (OR=0.97; 95% CI 0.95-0.98). Brazilian dentists were 1.85 times more likely (95% CI 1.25-2.75) to have a high level of cyberchondria than Portuguese dentists. Women were 1.62 times more likely (95% CI 1.07-2.44) to have a high level of cyberchondria than men. It was concluded that young age, Brazilian nationality, and female gender favored the high level of cyberchondria among the participants in this sample during COVID-19 pandemic.

The aim of this study was to determine Vickers microhardness (HV) in bulk fill resins at different depths. Test specimens were prepared with different bulk fill resins: Filtek Bulk-Fill (3M ESPE) [FBF], Surefill SDR flow (Dentsply) [SDR], Fill-UP (COLTENE) [FU] and Surefill (Dentsply) [SF]. Semi-cylindrical test specimens were prepared in a mold 6 mm in diameter and 4 mm thick (n=5). A 1000 mW/cm2 light curing unit was applied (Coltolux LED - Coltene) for 20 seconds. HV was determined with three indentations (Vickers Future Tech FM300, 300 g, 8 s) at four depths: 1, 2, 3 and 4 mm from the top surface to the interior. Data were recorded immediately (t0) and 24 hours later (t24). Results were analyzed with two-way ANOVA (p<0.05), and multiple comparisons were performed using Tukey's test. Mean and SD of HV at t0 for each mm were: [FBF] t0: 49.23(4.65) / 48.32(3.36) / 44.38(2.06) / 40.59(2.58); [FBF] t24: 61.37(3.47) / 62.63(3.03) / 57.27(5.22) / 56.37(5.88);[SDR]t0:27.81(3.13) / 28.07(2.4) / 27.24(2.94) / 25.71(3.0); [SDR] t24: 35.11(2.16) / 35.17(1.96) / 35.53(1.81) / 33.18(2.08); [FU] t0: 41.43(1.41) / 39.87(0.88) / 38.11(1.81) / 39.09(1.92); [FU] t24: 49.27(1.54) / 48.77(1.77) / 48.65(1.88) / 46.76(4.93); [SF] t0: 71.35(7.09) / 67.39(9.76) / 68.95(6.21) / 64.1(8.35); [SF] t24: 76.06(6.61) / 75.31(9.37) / 75.2(11.57) / 69.81(12.14). ANOVA showed significant effect of material, depth and recording time (p<0.05), and Tukey's test showed that recording sites (depths) differed significantly, giving four homogeneous groups. Under the conditions of this study, it can be concluded that microhardness of bulk-fill resins can be affected by depth and post-curing time.

The literature contains little information on several non-clinical factors such as the association between graduate residency programs and the application of minimally invasive dentistry, or on dentists' clinical decision-making processes for replacing restorations for esthetic reasons. This study evaluated whether non-clinical subjective factors influence the treatment decisions made by Brazilian dentists regarding technical and esthetic matters. Dentists were invited to participate in a cross-sectional survey by answering an electronic questionnaire containing clinical cases, regarding what treatment they would select for: T1 - a molar tooth with significant crown destruction and spontaneous pain, and T2 - premolar teeth with extensive amalgam restorations and no carious lesion or associated complaint. The survey also included questions about subjective variants (sociodemographic and professional). Chi Square test and Fischer's Exact test were used toanalyzetheanswers to T1, and one-factor analysis of variance and post-hoc Tamhane were applied to T2. The significance level was set at 5% for all analyses. A total 302 professionals participated in the study. For T1, it was found that clinical decision-making was influenced by the Brazilian region of clinical practice (p=0.005). For T2, a significant association was found between increased loss of patient tooth tissues and whether the professional had completed a residency program in Operative Dentistry (p=0.035), worked in a private practice (p=0.033), or if most of his/her patients belonged to a high estimated socioeconomic level (household income above $4350) (p=0.002). In conclusion, the clinical decision-making of Brazilian dentists varies according to professional profile, mainly with relation to the replacement of restorations due to esthetic concerns.

Phagocytic functions by neutrophils/ monocytes and biochemical parameters were assessed in peripheral blood of patients with periodontitis, whether or not associated to type 2 diabetes, or patients with type 2 diabetes, or systemically healthy people. Fifty-eight participants were divided into four groups: Control - systemically and periodontally healthy patients (C, n=16), Periodontitis (P, n=14), Type 2 Diabetes (DM, n=11) and Periodontitis associated with type 2 diabetes (DMP, n=17). Blood samples were used to analyze phagocytic activity and the production of superoxide anion using optical microscopy. Significantly lower phagocytic activity of neutrophils was observed in non-opsonized samples (p = 0.008, Kruskal- Wallis) of the periodontitis group and in opsonized samples (p = 0.029, Kruskal-Wallis) of the periodontitis associated with type 2 diabetes group when these groups were compared to the healthy individuals when a 20:1 yeast: phagocyte stimulus was used. Periodontitis patients, whether associated (p = 0.0007, sensitized; Kruskal-Wallis, 20:1) or not with diabetes (p = 0.018 and 0.0007, in the proportions 5:1 and 20:1 yeast: monocyte respectively in sensitized samples; Kruskal-Wallis) also showed lower phagocytic function of monocytes compared to the control group. There was no significant difference in the production of superoxide anion among the evaluated groups. Severe clinical attachment loss was associated with lower levels of HDL in periodontitis patients and a higher percentage of A1C in diabetes with periodontitis patients (p<0.05; Pearson and Spearman correlations, respectively). Patients with both associated diseases had higher levels of triglycerides and CRP (p<0.001, Kruskal-Wallis) compared to patients with diabetes only. The results of the present study suggest that periodontitis negatively interferes with the innate immune response and may represent a major risk of systemic complications such as cardiovascular disease in diabetic patients or even in healthy individuals.

The aim of this study was to compare the microshear bond strength of different resin cements to CAD/CAM-created lithium disilicate ceramics after 24 hours and after 1 year (10,000 thermocycles). Forty (40) ceramic bars were subjected to pretreatment comprising airborne abrasion with aluminum oxide particles, etching with 10% hydrofluoric acid and Monobond N application. Bars were divided into 4 groups (n = 10), based on cement type: light-cured Variolink Esthetic LC (VLC) and dual-cured Variolink N (VN) at two different times: after 24 hours and after 1 year. Silicone molds were used to prepare cement cylinders on a ceramic surface. The set was stored in distilled water at 37ºC, for 24 hours or subjected to 10,000 thermocycles. The molds were removed and microshear bond strength was tested. Data were submitted to two-way analysis of variance and Tukey's test (α = 0.05). Based on the comparison between cement values at different aging times (p = 0.035), VN after 24 hours (27.10 ± 0.92) and after 1 year (20.62 ± 1.25) presented significantly higher values than VLC after 24 hours (14.79 ± 0.76) and after 1 year (6.61 ± 0.81). Bond strength recorded for both cements after 24 hours (VN: 27.10 ± 0.92 and VLC: 14.79 ± 0.76) was significantly higher than the one recorded after 1 year (VN: 20.62 ± 1.25 and VLC: 6.61 ± 0.81). The thermocycling reduced the values observed for both investigated cements; bond strength was greater for dual-cure resin cement than for light-cured resin cement.