Acta odontologica latinoamericana : AOL最新文献

The aim of this study was to evaluate the amount of radiating energy transmitted through lithium disilicate discs of different thicknesses and opacities with different curing units (CU). Discshaped specimens 8 mm in diameter and 1.5 mm or 0.7 mm thick were designed with Zbrush® and Cura 3D® software, milled from HT and MO IPS e-maxCAD blocks (Ivoclar Vivadent) with Ceramill Mikro 4 (Amann Girrbach, Austria) and processed according to manufacturer instructions. Thickness was checked with a Mitutoyo (México) caliper. Four groups (n=4) were formed: G1(HT/1.5 mm), G2(MO/1.5 mm), G3(HT/0.7 mm) y G4(MO/0.7 mm), and the effect of three CUs: Coltolux (Coltene- Whaledent), LED.C, (Woodpecker Medical Instrument Co.Ltd) and Deepcure L(3M-ESPE) was tested Measurements were taken with a halogen and LED radiometer (Woodpecker® LM-1-Guilin Woodpecker Medical Instrument Co.Ltd) after applying the guide of each CU directly on the reading window (d) and after interposing each of the specimens. The ratio of transmitted energy was determined in each case and data was analyzed with repeated measures ANOVA and Tukey test for multiple comparisons. LED.C: d:1600 mW/cm2, G1: 0.31(0.00), G2: 0.14(0.00) G3: 0.54(0.01), G4: 0.38(0.01); Deepcure L: d:1500 mW/cm2, G1: 0.34(0.01), G2: 0.20(0,00), G3: 0.56(0.01), G4: 0.41(0.02); Coltolux: d:1275 mW/cm2, G1: 0.44(0.01), G2: 0.24(0,00), G3: 0.65(0.01), G4: 0.47(0,00). Statistically significant differences were found among the curing units (P<0.001) and for the interaction CU-thickness (P<0.001) and CU-opacity (P=0.023). Within the conditions of this study, the ratio of light transmitted through lithium disilicate structures is related to their thickness and opacity, and to the curing unit employed.

Chitosan is a biopolymer with bactericidal/bacteriostatic effect, biocompatible and biodegradable. It has been used in tissue engineering to replace tissues partially or completely by releasing bioactive materials or influencing cell growth, usually in regenerative medicine and dentistry. The aim of this study was to evaluate the cytotoxic and anti-inflammatory effect of chitosan alone or with hemostatic gelatin (Spongostand®) in cultures of human pulp cells (HPC), human gingival fibroblasts (HGF) and mouse pre-osteoblasts (MC3T3-E1, ATCC). HPC and HGF were isolated from patients. Cells were subcultured in DMEM. Chitosan was inoculated at different concentrations (0-0.5%) and hemostatic gelatins impregnated with chitosan (0.19%) were placed directly in the presence of cells and incubated for 24 hours. Cell viability was determined by MTT method and mean cytotoxic concentration (CC50) was calculated from the dose-response curve. Anti-inflammatory effect was calculated from the in vitro gingivitis model induced with interleukin 1beta (IL-1β) in HGF and protein detection. The data were subjected to Shapiro-Wilk, Kruskal-Wallis and Mann-Whitney tests. Experiments were performed in triplicate of three independent assays. Cell viability of HPC, HGF and MC3T3-E1 in contact with chitosan decreased significantly (p<0.05). The HPC were the most sensitive (CC50= 0.18%), followed by HGF (CC50= 0.18%) and MC3T3-E1 (CC50= 0.19%). The cytotoxicity of gelatins impregnated with chitosan decreased cell viability of HGF and HPC by 11% and 5%, respectively. The proinflammatory effect was reduced significantly in the gingivitis model. To conclude, chitosan induces moderate cytotoxic effects alone or with hemostatic gelatin at 0.19%, in dose-dependent manner, with anti-inflammatory effects on human gingival fibroblasts. The use of chitosan as a biomaterial can be an excellent choice for use in regenerative dentistry.

Adhesively cemented fiber-reinforced composite posts are commonly used to reconstruct endodontically treated teeth. Adhesion to intraradicular dentin is complex, and close contact between the resin cements and the dentin is essential. The removal of the smear layer following post space preparation (secondary smear layer) can improve this integration. Different mechanical systems have been used to activate the irrigant inside the root canal. The purpose of this study was to compare, ex-vivo, the removal of the smear layer from the walls of the immediate post space preparation by the action of three mechanized instruments. Forty premolar specimens with a single root canal were selected, endodontically treated, and shaped for glass fiber post cementation with Peeso reamer #1 (Dentsply Sirona, Switzerland) and Macrolock finishing drill #3 (RTD, France). The specimens were randomly divided into 4 groups (n=10): Group C (control); Group PUI (passive ultrasonic irrigation); Group CEP (Rotoprox brush, Hager Werken, Germany) and Group XP (XP-endo Finisher, FKG Dentaire, Switzerland). Post space surfaces were cleaned with 3mL of distilled water; each specimen root split longitudinally to expose the root canals, and prepared for examination in a scanning electron microscope at magnification 350X. The results were analyzed using the Kruskal-Wallis and Friedman tests (p>0.05). RESULTS: Statistically significant differences (p<0.05) were found between Groups C and XP in all three root regions, but not between Groups C, CEP and PIU. Of these, Group CEP showed a better trend in the results of the coronary and middle thirds, without significant difference with Group XP. Although it was difficult to achieve a clean dentin surface after preparation for the fiberglass post, the XP-endo Finisher was the most efficient in removing secondary smear layer, followed by the Rotoprox conical brush.

Infections of the oral cavity have a broad microbial etiological profile that varies according to each microenvironment in the mouth. Such infections often require antimicrobial treatment, which can lead to the development of resistance. There is thus a need to find new therapeutic strategies based on natural plant-derived compounds. The aim of this study was to determine the phytochemical nuclei and the antimicrobial effect of Anacardium excelsum leaf and stem extracts, and of fractions derived from the leaf extract, against Streptococcus mutans ATCC 25175, Staphylococcus aureus ATCC 35548, Escherichia coli ATCC 25922, Enterococcus faecalis ATCC 19433 and Candida albicans ATCC 10231. The plant material was collected from the Quindío Botanical Garden (Calarcá, Quindío-Colombia), located at an altitude of 1500 meters above sea level. Hydroalcoholic extracts of A. excelsum leaves and stems, and fractions of the hydroalcoholic leaf extract, were obtained by percolation extraction. Phytochemical nuclei were identified by thin layer chromatography. The antimicrobial activity of the extracts and fractions (at concentrations of 2, 5, 10, 20 and 40 mg / ml) against the five ATCC reference strains was evaluated using the well diffusion technique on Mueller-Hinton agar. The leaf extract showed no antimicrobial activity against E. coli, but it did show antimicrobial activity against S. mutans, S. aureus, E. faecalis and C. albicans, at a concentration of 10 mg/ml, with zones of inhibition of 9 to 11 mm. The ethyl acetate and acetone fractions obtained from A. excelsum leaf extract had greatest antimicrobial activity at 10 mg/ml. In conclusion, (1) the A. excelsum leaf extract, and the ethyl acetate and acetone fractions obtained from the leaf extract, had the greatest antimicrobial activity on all the study microorganisms, and (2) the phytochemical nuclei in the fractions (ethyl acetate and acetone) were found to contain phenolic-type compounds, tannins, triterpene-type terpenes and steroidal-type terpenes, which might explain the antimicrobial activity observed.

Great variation has been reported in worldwide prevalence of Molar Incisor Hypomineralization (MIH) and Hypomineralized Second Primary Molar (HSPM). South America has the highest regional prevalence. The aim of this study was to determine the prevalence and distribution of MIH HSPM in 6- to 12-year-old children who received care at two dental healthcare services (public and private) in Caracas Metropolitan Area, Venezuela. A cross-sectional prospective study was conducted on 145 children, of whom 121 were selected in the stratified random sample. A calibrated examiner (Kappa=0.878/0.831) evaluated all patients following the MIH diagnosis criteria established by the European Academy of Paediatric Dentistry and using a valid and reliable instrument. Data were analyzed with a significance level of 5%. Of the 121 children, 46.28% (56) were male and 53.72% (65) female, average age 8.83 ± 1.61. The prevalence of MIH/HSPM was 25.6%/20%. Both enamel defects were more prevalent in females (p-value=0.026/0.005). Severe MIH/HSPM was present in 21.8%/31.2% of cases. Average number of affected teeth was 4.16 ± 2.19/1.68 ± 0.74; and the condition was more frequent in upper molars (67.7%/51.4%). It was concluded that prevalence of MIH in 6- to 12-year-old Venezuelan children who received care in Caracas Metropolitan Area was higher than the previously estimated prevalence for South America, with predominance of mild affectation and more frequently occurring in upper molars.

The aim of this descriptive ex vivo study was to evaluate qualitatively the depth of pit and fissures (P&F) of the enamel in human mandibular third molars. Fifty (n=50) extracted human mandibular third molars were cleaned and disinfected. All tooth surfaces were coated with nail varnish except for a 1-mm margin around the periphery of the occlusal surface. The teeth were immersed for 48 hours at 37 °C in 1% methylene blue dye solution prepared in artificial saliva. After cleaning, the crowns were separated from the root at the cementoenamel junction and subsequently sectioned longitudinally in buccolingual direction at the location of the central fossa. All sections were examined using a stereoscopic microscope and photographed. The images were downloaded on a computer. The length of penetration of the P&F was recorded using the following scoring system: C1: P&F extended to half of the enamel thickness; C2: P&F extended beyond half of the enamel thickness without reaching the dentine-enamel junction; C3: P&F extended to the dentine-enamel junction. For pits, C1, C2 and C3 were observed in 35, 9 and 6 teeth, respectively, while for fissures, C1, C2 and C3 were observed in 15, 18 and 17 teeth, respectively. The P&F detected in the samples extended to the deepest portions of enamel, quite frequently reaching the enamel-dentine junction. Clinicians should recognize that even if pits and fissures are not clinically obvious, they penetrate deep into the enamel and frequently reach the dentine-enamel junction. Effective treatment is recommended to block access to P&F, thus preventing ingress of bacteria.

The aim of this study was to compare low- and high-viscosity bulk-fill composites for Knoop microhardness (KHN), microtensile bond strength (MTBS) to dentin in occlusal cavities, and fracture strength (FS) in molars with mesialocclusal- distal restoration. Disk-shaped samples with different thicknesses (2 or 4 mm) of low-viscosity (SDR Flow, Dentsply) and high-viscosity bulk-fill composites (Filtek BulkFill, 3M ESPE; and Tetric-N Ceram Bulk Fill, Ivoclar Vivadent) were prepared for top and bottom KHN analysis (n=10). MTBS to dentin and fracture pattern was evaluated in human molars with occlusal cavities restored with (n=10): conventional nanocomposite (Z350XT, 3M ESPE), low-viscosity (Filtek Bulk-fill Flow, 3M ESPE) or high-viscosity bulk-fill composites (Filtek BulkFill). The FS and fracture pattern of human molar with mesial-occlusal-distal restorations submitted or not to thermomechanical cycling were investigated (n=10) using: intact tooth (control), and restoration based on conventional microhybrid composite (Z250, 3M ESPE), low-viscosity (SDR Flow) or high-viscosity bulk-fill composites (Filtek BulkFill). The data were submitted to split-plot ANOVA (KHN), one-way ANOVA (MTBS), two-way ANOVA (FS) followed by Tukey's test (α=0.05). For KHN, there was no significant difference for the resin composites between the top and bottom. For MTBS, no significant differences among the materials were detected; however, the low-viscosity composite presented lower frequency of adhesive failures. For FS, there was no significant difference between composites and intact tooth regardless of thermomechanical cycling. Low- and high-viscosity bulk-fill composites have comparable microhardness and microtensile bond strength when used in occlusal restorations. Likewise, the bulk-fill composites present similar fracture strength in molars with mesio-occlusal-distal restorations.

The aim of this study was to determine prevalence and describe the clinical and radiographic findings of three-rooted primary mandibular first and second molars in a Mexican population. Intraoral periapical radiograph, orthopantomogram or cone beam computed tomography (CBCT) were obtained. A total 2284 children from the state of Puebla, Mexico were examined, of whom 20 presented an anatomic variant in tooth crown shape. Of the total teeth with crown alterations, 10 first and 5 second primary mandibular molars were found to have supernumerary roots. In one case, it was possible to obtain micro-CT images. The study recorded prevalence, unilateral or bilateral occurrence, and ratio between sexes. Data were analyzed using descriptive statistics. Clinical findings were presence of an anatomical variation (tuberculum paramolare / right and/or left cervical convexity) in primary mandibular first molars. Second molars presented conventional crown morphology. Prevalence of three-rooted primary mandibular first and second molars was 0.44% and 0.22%, respectively. Male: female ratio for presence of threerooted primary mandibular first molars was 4:1, showing genetic predisposition in males, and for second molars it was 1.5:1, with no predisposition according to sex. The clinical and radiographic anatomical variants in primary molars should be considered by pediatric dentists during routine care because they may cause difficulties in restorations.

This study compared prevalence and risk factors of dental anxiety between men and women. The sample consisted of 244 participants (n = 122 men) aged 18 years or older who sought dental care at a public Dental Education Institution from March 2018 to November 2019. The Modified Dental Anxiety Scale was used to determine presence of dental anxiety. The following risk factors were recorded: age, years of schooling, preoperative pain, and type of dental treatment. Bivariate analysis was used to assess the difference in dental anxiety between the sexes. Multivariate logistic regression was used to analyze the association between dental anxiety and gender, regardless of the influence of other variables. Total prevalence of dental anxiety was 18% (n = 44), 22.9% (28/122) in women and 13.1% (16/122) in men (p = 0.04). Gender (odds ratio: 1.83, 95% confidence interval: 0.92-3.62) and preoperative pain (odds ratio: 2.095, 95% confidence interval: 0.97-4.49) were associated with dental anxiety. We concluded that women had a higher prevalence of dental anxiety. Preoperative pain was associated with dental anxiety regardless of gender.

The aim of this study was to analyze the dimensions of the clinical crown of upper central incisors and the prevalence of tooth shapes by two different protocols. Assessment was performed on each of the 111 dental stone type V maxillae models of students of dentistry from Buenos Aires University [93 females and 18 males, mean age 23.70 (± 2.26) years] The mesial and distal-vestibular angles were defined on each right upper incisor, and the following segments were defined: AB (zenith - incisal edge), CD, EF, GH (apical, middle, and incisal thirds - vestibule - mesial and vestibule-distal angles) and their lengths were determined with a precision caliper. Then, the CD/AB, EF/AB and mean CD-EF/AB ratios were calculated. Shapes were assessed by four independent observers, three of whom evaluated digital images of the models, while the fourth had no access to the images, and determined the shapes using an algorithm developed from the dimensions of the studied segments. Rates and confidence intervals were determined, and Fleiss' Kappa was calculated to assess the agreement among the evaluators who worked with the images and among all of them. Average incisor length was 10 mm, and widths at CD and EF were 7.35 mm (0.65) and 8.27 mm (0.58), respectively. Regarding shapes, 51.58% (47.90-55.20) of the incisors were identified as square, 18.02% (14.50-21.90) as ovoid and 30.41% (30.00-30.90) as triangular. Fleiss' Kappa agreement was 0.71 (0.62-0.80). The application of the proposed algorithm provided a considerable level of agreement among the observers. Regarding tooth size, both the average segment length and the proportions were similar to those reported by various authors.