PhotoniX最新文献

Recent advances in imaging sensors and digital light projection technology have facilitated rapid progress in 3D optical sensing, enabling 3D surfaces of complex-shaped objects to be captured with high resolution and accuracy. Nevertheless, due to the inherent synchronous pattern projection and image acquisition mechanism, the temporal resolution of conventional structured light or fringe projection profilometry (FPP) based 3D imaging methods is still limited to the native detector frame rates. In this work, we demonstrate a new 3D imaging method, termed deep-learning-enabled multiplexed FPP (DLMFPP), that allows to achieve high-resolution and high-speed 3D imaging at near-one-order of magnitude-higher 3D frame rate with conventional low-speed cameras. By encoding temporal information in one multiplexed fringe pattern, DLMFPP harnesses deep neural networks embedded with Fourier transform, phase-shifting and ensemble learning to decompose the pattern and analyze separate fringes, furnishing a high signal-to-noise ratio and a ready-to-implement solution over conventional computational imaging techniques. We demonstrate this method by measuring different types of transient scenes, including rotating fan blades and bullet fired from a toy gun, at kHz using cameras of around 100 Hz. Experiential results establish that DLMFPP allows slow-scan cameras with their known advantages in terms of cost and spatial resolution to be used for high-speed 3D imaging tasks.

Refractive index (RI) sensors play an important role in various applications including biomedical analysis and food processing industries. However, developing RI sensors with both high resolution and wide linear range remains a great challenge due to the tradeoff between quality (Q) factor and free spectral range (FSR) of resonance mode. Herein, the optical steelyard principle is presented to address this challenge by synergizing resonances from the Fabry–Perot (FP) cavity and metasurface, integrated in a hybrid configuration form on the end facet of optical fibers. Specifically, the FP resonance acting like the scale beam, offers high resolution while the plasmonic resonance acting like the weight, provides a wide linear range. Featuring asymmetric Fano spectrum due to modal coupling between these two resonances, a high Q value (~ 3829 in liquid) and a sensing resolution (figure of merit) of 2664 RIU⁻¹ are experimentally demonstrated. Meanwhile, a wide RI sensing range (1.330–1.430 in the simulation and 1.3403–1.3757 in the experiment) is realized, corresponding to a spectral shift across several FSRs (four and two FSRs in the simulation and experiment, respectively). The proposed steelyard RI sensing strategy is promising in versatile monitoring applications, e.g., water salinity/turbidity and biomedical reaction process, and could be extended to other types of sensors calling for both high resolution and wide linear range.

The issue of brightness in strong ambient light conditions is one of the critical obstacles restricting the application of augmented reality (AR) and mixed reality (MR). Gallium nitride (GaN)-based micro-LEDs, renowned for their exceptional brightness and stability, are considered the foremost contenders for AR applications. Nevertheless, conventional heteroepitaxial growth micro-LED devices confront formidable challenges, including substantial wavelength shifts and efficiency droop. In this paper, we firstly demonstrated the high-quality homoepitaxial GaN-on-GaN micro-LEDs micro-display, and thoroughly analyzed the possible benefits for free-standing GaN substrate from the material-level characterization to device optoelectronic properties and micro-display application compared with sapphire substrate. The GaN-on-GaN structure exhibits a superior crystal quality with ultra-low threading dislocation densities (TDDs) of ~ 10⁵ cm⁻², which is three orders of magnitude lower than that of GaN-on-Sapphire. Through an in-depth size-dependent optoelectronic analysis of blue/green emission GaN-on-GaN/ Sapphire micro-LEDs from 100 × 100 shrink to 3 × 3 μm², real that a lower forward voltage and series resistance, a consistent emission wavelength (1.21 nm for blue and 4.79 nm for green @ 500 A/cm²), coupled with a notable reduction in efficiency droop ratios (15.6% for blue and 28.5% for green @ 500 A/cm²) and expanded color gamut (103.57% over Rec. 2020) within GaN-on-GaN 10 μm micro-LEDs. Last but not least, the GaN-on-GaN micro-display with 3000 pixels per inch (PPI) showcased enhanced display uniformity and higher luminance in comparison to its GaN-on-Sapphire counterpart, demonstrating significant potentials for high-brightness AR/MR applications under strong ambient light.

Surface plasmon resonance (SPR) sensors are based on photon-excited surface charge density oscillations confined at metal-dielectric interfaces, which makes them highly sensitive to biological or chemical molecular bindings to functional metallic surfaces. Metal nanostructures further concentrate surface plasmons into a smaller area than the diffraction limit, thus strengthening photon-sample interactions. However, plasmonic sensors based on intensity detection provide limited resolution with long acquisition time owing to their high vulnerability to environmental and instrumental noises. Here, we demonstrate fast and precise detection of noble gas dynamics at single molecular resolution via frequency-comb-referenced plasmonic phase spectroscopy. The photon-sample interaction was enhanced by a factor of 3,852 than the physical sample thickness owing to plasmon resonance and thermophoresis-assisted optical confinement effects. By utilizing a sharp plasmonic phase slope and a high heterodyne information carrier, a small atomic-density modulation was clearly resolved at 5 Hz with a resolution of 0.06 Ar atoms per nano-hole (in 10^–11 RIU) in Allan deviation at 0.2 s; a faster motion up to 200 Hz was clearly resolved. This fast and precise sensing technique can enable the in-depth analysis of fast fluid dynamics with the utmost resolution for a better understanding of biomedical, chemical, and physical events and interactions.

Holographic display offers the capability to generate high-quality images with a wide color gamut since it is laser-driven. However, many existing holographic display techniques fail to fully exploit this potential, primarily due to the system’s imperfections. Such flaws often result in inaccurate color representation, and there is a lack of an efficient way to address this color accuracy issue. In this study, we develop a color-aware hologram optimization approach for color-accurate holographic displays. Our approach integrates both laser and camera into the hologram optimization loop, enabling dynamic optimization of the laser’s output color and the acquisition of physically captured feedback. Moreover, we improve the efficiency of the color-aware optimization process for holographic video displays. We introduce a cascade optimization strategy, which leverages the redundant neighbor hologram information to accelerate the iterative process. We evaluate our method through both simulation and optical experiments, demonstrating the superiority in terms of image quality, color accuracy, and hologram optimization speed compared to previous algorithms. Our approach verifies a promising way to realize a high-fidelity image in the holographic display, which provides a new direction toward the practical holographic display.

Lensless fiber endomicroscopy, an emergent paradigm shift for minimally-invasive microscopic optical imaging and targeted light delivery, holds transformative potential, especially in biomedicine. Leveraging holographic detection and physical or computational wavefront correction, it enables three-dimensional imaging in an unprecedentedly small footprint, which is crucial for various applications such as brain surgery. This perspective reviews the recent breakthroughs, highlighting potential emerging applications, and pinpointing gaps between innovation and real-world applications. As the research in this realm accelerates, the novel breakthroughs and existing frontiers highlighted in this perspective can be used as guidelines for researchers joining this exciting domain.

Wavefront control is the fundamental requirement in optical informatics. Planar optics have drawn intensive attention due to the merits of compactness and light weight. However, it remains a challenge to freely manipulate the dispersion, hindering practical applications, especially in imaging. Here, we propose the concept of frequency-synthesized phase engineering to solve this problem. A phasefront-frequency matrix is properly designed to encode different spatial phases to separate frequencies, thus makes arbitrary dispersion tailoring and even frequency-separated functionalization possible. The periodically rotated director endows cholesteric liquid crystal with a spin and frequency selective reflection. Moreover, via presetting the local initial orientation of liquid crystal, geometric phase is encoded to the reflected light. We verify the proposed strategy by cascading the chiral anisotropic optical media of specifically designed helical pitches and initial director orientations. By this means, planar lenses with RGB achromatic, enhanced chromatic aberration and color routing properties are demonstrated. Inch-sized and high-efficient lenses are fabricated with low crosstalk among colors. It releases the freedom of dispersion control of planar optics, and even enables frequency decoupled phase modulations. This work brings new insights to functional planar optics and may upgrade the performance of existing optical apparatuses.

Since the concept of adaptive optics(AO) was proposed in 1953, AO has become an indispensable technology for large aperture ground-based optical telescopes aimed at high resolution observations. This paper provides a comprehensive review of AO progress for large aperture astronomical optical telescopes including both night-time and day-time solar optical telescopes. The recent AO technological advances, such as Laser Guide Star, Deformable Secondary Mirror, Extreme AO, and Multi-Conjugate AO are focused.

Optical encryption plays an increasingly important role in the field of information security owing to its parallel processing capability and low power consumption. Employing the ultrathin metasurfaces in optical encryption has promoted the miniaturization and multifunctionality of encryption systems. Nevertheless, with the few number of degrees of freedom (DoFs) multiplexed by single metasurface, both key space and encoding space are limited. To address this issue, we propose a high-security and large-capacity optical encryption scheme based on perfect high-dimensional Poincaré beams with expanded DoFs. By cascading two arrayed metasurfaces, more beam properties can be independently engineered, which gives rise to the extensively expanded key and encoding spaces. Our work provides a promising strategy for optical encryption with high security level and large information capacity and might facilitate the applications of Poincaré beams in optical communications and quantum information.