Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063780
S. Reddy, C. Nandini
India is the second largest user of mobile data in the world. There has been a significant growth of IOT in all the major sectors including the agriculture and animal health care. The veterinary science is looking for more technologies to monitor animal health and there had been a significant increase in the number of sensors for Internet of Animal Health Things (IoAHT). In dairy industry the Artificial insemination is the most used productive technology and its success depends on the correct estrus detection. Frequent failure of it results in low fertility rate and repeat breeding syndrome. In this paper we have come across the usage IOT and analytics to identify estrus and other illness in cattle which affects the estrus cycle.
{"title":"Early Detection of Estrus and Heat stress using IoAHT and Analytics in Indian Cattle to overcome Repeat-Breading-Syndrome","authors":"S. Reddy, C. Nandini","doi":"10.1109/ICATIECE45860.2019.9063780","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063780","url":null,"abstract":"India is the second largest user of mobile data in the world. There has been a significant growth of IOT in all the major sectors including the agriculture and animal health care. The veterinary science is looking for more technologies to monitor animal health and there had been a significant increase in the number of sensors for Internet of Animal Health Things (IoAHT). In dairy industry the Artificial insemination is the most used productive technology and its success depends on the correct estrus detection. Frequent failure of it results in low fertility rate and repeat breeding syndrome. In this paper we have come across the usage IOT and analytics to identify estrus and other illness in cattle which affects the estrus cycle.","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"252 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133532269","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063770
D. Ashoka, A. C B, Bharath M. B
Even today fifty percent of India’s working force is employed in agriculture and agro related industries. Which contributes 17 to 18% of India’s GDP as of 2018. With that context, many farmers face problems in getting good agriculture yield and price for the products they produce and there are no proper guidance with respect to upcoming techniques and technology platforms where they can easily discuss and clarify their issues regarding the agriculture related topics. Hence, here is a new strategy to find solutions for all such issues and provide a platform to better knowledge sharing and enhancing the opportunities. A Web app for updating about the crop growth and monitoring in real time so as to keep the yield in better possible way. Also, an online discussion forum that would help farmers at a different location to remotely communicate and get the suggestion instantly. Unlike the normal web app, this web app model is hosted in the Customized cloud server (servers) which act as a reliable and efficient environment. The Innovative cloud servers are not only reliable with service but also provides many advantages like scalability, availability and cost-effectiveness. The server will be very robust in running the process in multiple operating systems without any delay or lag for the farmers. In this paper we propose a framework for increasing the agriculture yield using distributed computing with low cost approach.
{"title":"A Framework for Enhancing the Agriculture yield using Cloud Clusters","authors":"D. Ashoka, A. C B, Bharath M. B","doi":"10.1109/ICATIECE45860.2019.9063770","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063770","url":null,"abstract":"Even today fifty percent of India’s working force is employed in agriculture and agro related industries. Which contributes 17 to 18% of India’s GDP as of 2018. With that context, many farmers face problems in getting good agriculture yield and price for the products they produce and there are no proper guidance with respect to upcoming techniques and technology platforms where they can easily discuss and clarify their issues regarding the agriculture related topics. Hence, here is a new strategy to find solutions for all such issues and provide a platform to better knowledge sharing and enhancing the opportunities. A Web app for updating about the crop growth and monitoring in real time so as to keep the yield in better possible way. Also, an online discussion forum that would help farmers at a different location to remotely communicate and get the suggestion instantly. Unlike the normal web app, this web app model is hosted in the Customized cloud server (servers) which act as a reliable and efficient environment. The Innovative cloud servers are not only reliable with service but also provides many advantages like scalability, availability and cost-effectiveness. The server will be very robust in running the process in multiple operating systems without any delay or lag for the farmers. In this paper we propose a framework for increasing the agriculture yield using distributed computing with low cost approach.","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"36 1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123483121","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063801
S. Bagchi, S. Goswami, B. Ghosh, M. Dutta, R. Bhaduri
This paper presents an efficient illustration of symmetrical as well as asymmetrical faults which occur in transmission line. The agenda of this proposed work to identify the effect of different types of fault on transmission line voltage and current. Firstly, a small three phase system is constructed in MATLAB/SIMULINK environment and the voltage and current profiles of transmission line are observed. Then symmetrical and asymmetrical faults likes three phase fault, single line to ground fault (L-G), line to line fault (L-L) and double line to ground fault (L-L-G) are imposed at particular section with specified time period to identify the change in system parameters. Further the circuit breaker operation has been incorporated in that particular section where the fault will occur and it is observed that in spite of occurrence of fault the system is prevented from any failure and also the voltage recovery has taken place.
{"title":"Symmetrical and Asymmetrical Fault Analysis of Transmission Line with Circuit Breaker Operation","authors":"S. Bagchi, S. Goswami, B. Ghosh, M. Dutta, R. Bhaduri","doi":"10.1109/ICATIECE45860.2019.9063801","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063801","url":null,"abstract":"This paper presents an efficient illustration of symmetrical as well as asymmetrical faults which occur in transmission line. The agenda of this proposed work to identify the effect of different types of fault on transmission line voltage and current. Firstly, a small three phase system is constructed in MATLAB/SIMULINK environment and the voltage and current profiles of transmission line are observed. Then symmetrical and asymmetrical faults likes three phase fault, single line to ground fault (L-G), line to line fault (L-L) and double line to ground fault (L-L-G) are imposed at particular section with specified time period to identify the change in system parameters. Further the circuit breaker operation has been incorporated in that particular section where the fault will occur and it is observed that in spite of occurrence of fault the system is prevented from any failure and also the voltage recovery has taken place.","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126421272","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063862
J. P, Vatsala G.A, Radha Gupta
Establishment of Garbage disposal unit is not so easy task. Establishment work involves many difficulties. It involves the expenditure of labours, transport, machines, collection, segregation and disposing the wastes to different waste management companies. Proper Planning required for maintaining the established disposal unit. By minimizing the expenditure and recycling the wastes we get the profit from the unit. Establishment of Garbage disposal unit helps the society in many ways. Major works of Garbage disposal unit is collection, segregation, disposal by selling of wastes to different waste management company or recycling them in the same unit and selling the by-products to different markets. We developed the goal programming model to acquire maximum benefit /profit from the unit. The main objective of this paper involves getting the maximum profit by minimizing the deviation in multiple goals by developing the model
{"title":"Establishing Garbage Disposal Unit Using Mathematical Technique","authors":"J. P, Vatsala G.A, Radha Gupta","doi":"10.1109/ICATIECE45860.2019.9063862","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063862","url":null,"abstract":"Establishment of Garbage disposal unit is not so easy task. Establishment work involves many difficulties. It involves the expenditure of labours, transport, machines, collection, segregation and disposing the wastes to different waste management companies. Proper Planning required for maintaining the established disposal unit. By minimizing the expenditure and recycling the wastes we get the profit from the unit. Establishment of Garbage disposal unit helps the society in many ways. Major works of Garbage disposal unit is collection, segregation, disposal by selling of wastes to different waste management company or recycling them in the same unit and selling the by-products to different markets. We developed the goal programming model to acquire maximum benefit /profit from the unit. The main objective of this paper involves getting the maximum profit by minimizing the deviation in multiple goals by developing the model","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"58 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126552695","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063843
Manjula Gururaj Rao H, Dr. G. S. Nagaraja
To detection of any types of anomalies in the medical images, the quality of the image is very important. To improve the quality of the images pre-processing steps are used. This includes the image enhancement and noise removal. Removing of the noise is done by various methods. This paper elaborates on different types of noise in the X-ray Dicom images and different filtering methods. Image improvement is calculated using PSNR and MSE.
{"title":"Noise Removal Techniques and Quality analysis of X-ray Images","authors":"Manjula Gururaj Rao H, Dr. G. S. Nagaraja","doi":"10.1109/ICATIECE45860.2019.9063843","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063843","url":null,"abstract":"To detection of any types of anomalies in the medical images, the quality of the image is very important. To improve the quality of the images pre-processing steps are used. This includes the image enhancement and noise removal. Removing of the noise is done by various methods. This paper elaborates on different types of noise in the X-ray Dicom images and different filtering methods. Image improvement is calculated using PSNR and MSE.","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132857420","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063858
Debanjana Bhattacharyya, K. C. Pati
In the present study, the technique of Lie algebra has been applied to test controllability of nonlinear dynamical system of DC-DC converter. In order to perform this study, nonlinear controllability conditions comprising of Lie Algebra Rank Condition (LARC) and Sussman's theorem on small time local controllability has been applied. The DC-DC converter considered in this work has been found to be controllable, which is inferred from the plots of system states such as, current flowing through inductor and voltage across capacitor with respect to time. The controllability index has also been computed and the results obtained from nonlinear controllability analysis based on Lie Algebra are matched with the findings based on evaluated controllability index. DC-DC converter working in continuous current mode (CCM) has been simulated in MATLAB/SIMULINK and the system states have been found to be controllable for the different values of duty cycle and input voltage applied for this study. It is found that variation in both duty cycle and input voltage does not influence the controllability of DC-DC converter. The findings of this mathematical analysis and computer simulation based work are significant to understand the controllability status of the nonlinear dynamical systems of power electronic converters.
{"title":"Nonlinear controllability analysis of DC-DC converters using Lie Algebraic method","authors":"Debanjana Bhattacharyya, K. C. Pati","doi":"10.1109/ICATIECE45860.2019.9063858","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063858","url":null,"abstract":"In the present study, the technique of Lie algebra has been applied to test controllability of nonlinear dynamical system of DC-DC converter. In order to perform this study, nonlinear controllability conditions comprising of Lie Algebra Rank Condition (LARC) and Sussman's theorem on small time local controllability has been applied. The DC-DC converter considered in this work has been found to be controllable, which is inferred from the plots of system states such as, current flowing through inductor and voltage across capacitor with respect to time. The controllability index has also been computed and the results obtained from nonlinear controllability analysis based on Lie Algebra are matched with the findings based on evaluated controllability index. DC-DC converter working in continuous current mode (CCM) has been simulated in MATLAB/SIMULINK and the system states have been found to be controllable for the different values of duty cycle and input voltage applied for this study. It is found that variation in both duty cycle and input voltage does not influence the controllability of DC-DC converter. The findings of this mathematical analysis and computer simulation based work are significant to understand the controllability status of the nonlinear dynamical systems of power electronic converters.","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133887177","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063861
D. Manjunath, Basavaraj S Hadimani
In recent year sentiment analysis plays an important role in the opinion mining where the research on the analysis is mainly focused on the extraction of opinions and their emotions towards a particular application in the web. This paper presents review analysis of movie from various movie based applications. This paper concentrates more on the fundamental aspects of sentimental analysis which includes different methods of analyzing the reviews including data extraction, clustering and classification. In this paper extraction of the reviews from various movie based applications like IMDB, Pay tm etc.,, can be taken and formed the Movie dataset, This Movie API consists of movie name, comments, reviews, rating, emoji’s etc., In this paper first data pre-processing techniques is applied to clean the dataset and then apply the hierarchical clustering for the attributes taken and then regression based classification on the attributes to form a cluster based on negative and the positive reviews provided by the different users and finally determining the accuracy using proposed hierarchical clustering and regression technique with existing decision tree technique and the accuracy of proposed technique more accuracy is achieved.
{"title":"Hierarchical Clustering and Regression Classification based Review analysis on Movie based Applications","authors":"D. Manjunath, Basavaraj S Hadimani","doi":"10.1109/ICATIECE45860.2019.9063861","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063861","url":null,"abstract":"In recent year sentiment analysis plays an important role in the opinion mining where the research on the analysis is mainly focused on the extraction of opinions and their emotions towards a particular application in the web. This paper presents review analysis of movie from various movie based applications. This paper concentrates more on the fundamental aspects of sentimental analysis which includes different methods of analyzing the reviews including data extraction, clustering and classification. In this paper extraction of the reviews from various movie based applications like IMDB, Pay tm etc.,, can be taken and formed the Movie dataset, This Movie API consists of movie name, comments, reviews, rating, emoji’s etc., In this paper first data pre-processing techniques is applied to clean the dataset and then apply the hierarchical clustering for the attributes taken and then regression based classification on the attributes to form a cluster based on negative and the positive reviews provided by the different users and finally determining the accuracy using proposed hierarchical clustering and regression technique with existing decision tree technique and the accuracy of proposed technique more accuracy is achieved.","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"390 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134179713","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063625
John Renz B. Bodollo, John Daniel V. Cortez, Edrick Raven P. Maraya, Ervin V. Navarro, Ralf Quintin L. Saquing, R. Tolentino
This study implements 3d face tracking and skeletal tracking in Microsoft Kinect Xbox One. Once the user is detected by the sensor head point from skeletal tracking, and a computed point D from chin point and eyebrow midpoint from 3d face tracking will be used to create the Line of Sight vector. Also, appliance points are always specified by the location of the appliance in the room with respect to the Kinect. Different appliance vectors will be created through vector subtraction. Angles between the Line of Sight vector and each of the appliance vector were computed through scalar product and compared to obtain the smallest angle. Once the smallest angle was obtained it was compared to a 15-degree threshold. If it’s within the threshold, then the appliance is selected.
本研究在微软Kinect Xbox One上实现了三维人脸跟踪和骨骼跟踪。一旦用户被传感器检测到头部点来自骨骼跟踪，从下巴点和眉毛中点从3d面部跟踪计算点D将被用来创建视线向量。此外，设备点总是由设备在房间中相对于Kinect的位置来指定。通过向量减法，将创建不同的器具向量。通过标量积计算视线矢量与各应用矢量之间的夹角，并进行比较，求出最小夹角。一旦获得最小的角度，就将其与15度阈值进行比较。如果在阈值范围内，则选择该设备。
{"title":"Selection of Appliance Using Skeletal Tracking and 3D Face Tracking for Gesture Control Home Automation","authors":"John Renz B. Bodollo, John Daniel V. Cortez, Edrick Raven P. Maraya, Ervin V. Navarro, Ralf Quintin L. Saquing, R. Tolentino","doi":"10.1109/ICATIECE45860.2019.9063625","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063625","url":null,"abstract":"This study implements 3d face tracking and skeletal tracking in Microsoft Kinect Xbox One. Once the user is detected by the sensor head point from skeletal tracking, and a computed point D from chin point and eyebrow midpoint from 3d face tracking will be used to create the Line of Sight vector. Also, appliance points are always specified by the location of the appliance in the room with respect to the Kinect. Different appliance vectors will be created through vector subtraction. Angles between the Line of Sight vector and each of the appliance vector were computed through scalar product and compared to obtain the smallest angle. Once the smallest angle was obtained it was compared to a 15-degree threshold. If it’s within the threshold, then the appliance is selected.","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"103 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121356062","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063804
Tanay Karve
A SmartDriving system has been developed by using classical Image Processing and Cartesian Geometry. This smart system aims to outperform the conventional driving system based on steering wheel and pedals, by using an onboard mini camera and powerful algorithms running on an onboard computer. This SmartDriving system eliminates the need of legs for driving, thus making it convenient for the wheelchair-ridden. It also prevents deaths due to accidents as the prime cause of deaths in accidents, the steering wheel, is replaced by the said system. The vehicle is maneuvered as if an imaginary steering wheel is held in air, and controlled with usual left/right turning. The acceleration is controlled by the Euclidean distance between the hands holding the imaginary steering wheel. Braking is controlled by converging the distance between the hands. SmartDriving system aims to replace conventional driving methods to make driving accessible, easier, safer and smarter for everyone.
{"title":"Smart Vehicle Driving System using Computer Vision based Hand Motion Tracking","authors":"Tanay Karve","doi":"10.1109/ICATIECE45860.2019.9063804","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063804","url":null,"abstract":"A SmartDriving system has been developed by using classical Image Processing and Cartesian Geometry. This smart system aims to outperform the conventional driving system based on steering wheel and pedals, by using an onboard mini camera and powerful algorithms running on an onboard computer. This SmartDriving system eliminates the need of legs for driving, thus making it convenient for the wheelchair-ridden. It also prevents deaths due to accidents as the prime cause of deaths in accidents, the steering wheel, is replaced by the said system. The vehicle is maneuvered as if an imaginary steering wheel is held in air, and controlled with usual left/right turning. The acceleration is controlled by the Euclidean distance between the hands holding the imaginary steering wheel. Braking is controlled by converging the distance between the hands. SmartDriving system aims to replace conventional driving methods to make driving accessible, easier, safer and smarter for everyone.","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115272089","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-01DOI: 10.1109/ICATIECE45860.2019.9063821
Sreenivasa Setty, M.S Kavana, Aman Ulla
Having seen this Wonderful creation of god, it amazes everyone for the beauty around us is mesmerizing, the nature and the habitats on this planet. Every day we happen to encounter beautiful sunrise and starting the day with full potential and ending day peacefully and calmness like a sunset at evening. But What about those people who aren’t blessed sight, wonder how they spend their entire life with only one color and no sight. So, the aim is to help the blind people sense the surrounding so that they can at least feel their surroundings and don’t miss the God’s creation. We for the first-time combining Internet of Things (IoT) and Machine Leaning (ML) together and creating a real-time product which can help the blind to hear and know things in their surroundings. We will be using a Raspberry Pi 3 microcontroller and a Raspberry pi cam to feed the video recording and then apply the Object Detection Algorithm on the video and detects objects for real.
{"title":"Goggle, GPS Tracker and Water Purity Detector","authors":"Sreenivasa Setty, M.S Kavana, Aman Ulla","doi":"10.1109/ICATIECE45860.2019.9063821","DOIUrl":"https://doi.org/10.1109/ICATIECE45860.2019.9063821","url":null,"abstract":"Having seen this Wonderful creation of god, it amazes everyone for the beauty around us is mesmerizing, the nature and the habitats on this planet. Every day we happen to encounter beautiful sunrise and starting the day with full potential and ending day peacefully and calmness like a sunset at evening. But What about those people who aren’t blessed sight, wonder how they spend their entire life with only one color and no sight. So, the aim is to help the blind people sense the surrounding so that they can at least feel their surroundings and don’t miss the God’s creation. We for the first-time combining Internet of Things (IoT) and Machine Leaning (ML) together and creating a real-time product which can help the blind to hear and know things in their surroundings. We will be using a Raspberry Pi 3 microcontroller and a Raspberry pi cam to feed the video recording and then apply the Object Detection Algorithm on the video and detects objects for real.","PeriodicalId":106496,"journal":{"name":"2019 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering (ICATIECE)","volume":"51 7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115978635","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：