Pub Date : 2019-01-15DOI: 10.46565/jreas.2019.v04i01.006
Charlie Fulzele
Availability of fossil fuels is real struggle now days as it is of limited in nature on Earth.Renewable energy sources are available with ample of amount with different sources like solar, wind etc. One of such renewable energy is Small Hydro which is the most emerging technology for survival and generation of electricity. Therefore Small Hydro needs to be utilized for power development. Small Hydro Power (SHP) is one of the resources available for hilly region as well as other parts of the country.SHP plants are the need for today. India has around 20000 MW potential for large number small hydel plants in various states. Cost calculation for different SHP components has been covered in the current paper for collected data in Vidarbha region of Maharashtra State. The equation for design discharge has been formulated by considering the rivers with width, depth and the flow of water.
{"title":"A REVIEW ON SMALL HYDRO POWER POTENTIAL INVIDARBHA REGION ACROSS CENTRAL INDIA","authors":"Charlie Fulzele","doi":"10.46565/jreas.2019.v04i01.006","DOIUrl":"https://doi.org/10.46565/jreas.2019.v04i01.006","url":null,"abstract":"Availability of fossil fuels is real struggle now days as it is of limited in nature on Earth.Renewable energy sources are available with ample of amount with different sources like solar, wind etc. One of such renewable energy is Small Hydro which is the most emerging technology for survival and generation of electricity. Therefore Small Hydro needs to be utilized for power development. Small Hydro Power (SHP) is one of the resources available for hilly region as well as other parts of the country.SHP plants are the need for today. India has around 20000 MW potential for large number small hydel plants in various states. Cost calculation for different SHP components has been covered in the current paper for collected data in Vidarbha region of Maharashtra State. The equation for design discharge has been formulated by considering the rivers with width, depth and the flow of water.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"5 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88742958","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-01-15DOI: 10.46565/jreas.2019.v04i01.005
Devendra Pandit, S. Jachak, S. Banker
In sand casting method, process of making casting depends upon various factors like mould, gating system, type of metal etc.For a sound casting, it is required to optimize the casting parameters for a given geometry of casting, to remove the defects and improve the quality in casted products.In this paper Taguchi technique along with design of experiments method (DOE) and Computer Aided Casting Simulation Technique are combined for optimization of gating system parameters of a CI Conveyor Bracket to improve the Product Yield (PY) and Hardness (HRD) of the casting.The gating system related parameters considered are, Runner Upper Diameter (mm), Runner Lower Diameter (mm), Runner Height (mm), Ingate Height (mm), Pouring Time (sec). In the First half part of the work, Taguchi based L18 Orthogonal Array was generated for experimental purpose and analysis of result was done using S/N ratio, Minitab 17 Software and Analysis of Variance (ANOVA) to analyze effect of gating system parameters on Product Yield and Hardness. In the second half part of work, AutoCast simulation software was used for validation of the result. Parameters are also validated by implementing it in foundry.
{"title":"OPTIMIZATION OF GATING SYSTEM PARAMETERS OFCI CONVEYOR BRACKET USING TAGUCHI ANDCOMPUTER AIDED SIMULATION TECHNIQUES","authors":"Devendra Pandit, S. Jachak, S. Banker","doi":"10.46565/jreas.2019.v04i01.005","DOIUrl":"https://doi.org/10.46565/jreas.2019.v04i01.005","url":null,"abstract":"In sand casting method, process of making casting depends upon various factors like mould, gating system, type of metal etc.For a sound casting, it is required to optimize the casting parameters for a given geometry of casting, to remove the defects and improve the quality in casted products.In this paper Taguchi technique along with design of experiments method (DOE) and Computer Aided Casting Simulation Technique are combined for optimization of gating system parameters of a CI Conveyor Bracket to improve the Product Yield (PY) and Hardness (HRD) of the casting.The gating system related parameters considered are, Runner Upper Diameter (mm), Runner Lower Diameter (mm), Runner Height (mm), Ingate Height (mm), Pouring Time (sec). In the First half part of the work, Taguchi based L18 Orthogonal Array was generated for experimental purpose and analysis of result was done using S/N ratio, Minitab 17 Software and Analysis of Variance (ANOVA) to analyze effect of gating system parameters on Product Yield and Hardness. In the second half part of work, AutoCast simulation software was used for validation of the result. Parameters are also validated by implementing it in foundry.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"2004 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82540036","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-01-01DOI: 10.46565/jreas.2019.v04i04.003
R. Deotale, A. M. Pande
In recent time quarry sand is being extensively used in concrete due to environmental concerns leading to restrictions on use of natural sand. The extensive research publications broadly indicate suitability as well as limitations of quarry sand use in concrete. Most of the literature relates the performance of quarry sand concrete in various combinations adopted by researchers. The need is felts by authors to identify some factors directly related to strength parameters. The authors tried ninety different combinations covering M25, M30 & M40 grade of concrete containing various amounts of cement, quarry sand, natural sand and fly ash. Authors observed that quarry sand to natural sand ratio is an important factor governing development of compressive strength, split tensile strength and flexural strength of concrete mixes consisting of quarry sand and natural sand. It has been observed that strength parameters go on increasing with quarry sand to natural sand ratio up to 0.9, there after strength goes on decreasing. The critical analysis of data compiled was used to develop mathematical models for estimating compressive strength split tensile strength and flexural strength at various ages. The models were tested for own result and result from references. It is observed that the mathematical models are realistic and justify the relevance of quarry sand to natural sand ratio in development of strength.
{"title":"RELEVANCE OF QUARRY SAND AND NATURALSAND RATIO IN ACHIEVING DIFFERENT STRENGTHS","authors":"R. Deotale, A. M. Pande","doi":"10.46565/jreas.2019.v04i04.003","DOIUrl":"https://doi.org/10.46565/jreas.2019.v04i04.003","url":null,"abstract":"In recent time quarry sand is being extensively used in concrete due to environmental concerns leading to restrictions on use of natural sand. The extensive research publications broadly indicate suitability as well as limitations of quarry sand use in concrete. Most of the literature relates the performance of quarry sand concrete in various combinations adopted by researchers. The need is felts by authors to identify some factors directly related to strength parameters. The authors tried ninety different combinations covering M25, M30 & M40 grade of concrete containing various amounts of cement, quarry sand, natural sand and fly ash. Authors observed that quarry sand to natural sand ratio is an important factor governing development of compressive strength, split tensile strength and flexural strength of concrete mixes consisting of quarry sand and natural sand. It has been observed that strength parameters go on increasing with quarry sand to natural sand ratio up to 0.9, there after strength goes on decreasing. The critical analysis of data compiled was used to develop mathematical models for estimating compressive strength split tensile strength and flexural strength at various ages. The models were tested for own result and result from references. It is observed that the mathematical models are realistic and justify the relevance of quarry sand to natural sand ratio in development of strength.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"60 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84382748","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-01-01DOI: 10.46565/jreas.2019.v04i04.005
Rameshwar J. Vishwakarma, R. K. Ingle
Concrete pavements are largely constructed and promoted by government in recent years in India. Concrete pavements are preferred over bituminous pavements due to its low life cycle cost, durability and low maintenance. Design of plain jointed concrete pavement depends on the stress ratio (i.e. ratio of flexural stress to flexural strength). Flexural stress calculation is influenced by many parameters like stiffness of soil subgrade, vehicle axle loads, environmental loads, location of load placement, load arrangement, tyre pressure, material properties of concrete, design period, repetition of loads and slab size. It is very important to estimate errorless response of pavement for given practical conditions. A study has been carried out on important parameters that affects the design of plain jointed concrete pavement. Study shows that finite element analysis should be done to obtain the critical flexural stresses as many widely used guidelines are based on many assumptions.
{"title":"INFLUENCE OF DIFFERENT PARAMETERS ONCRITICAL STRESSES IN CONCRETE PAVEMENT","authors":"Rameshwar J. Vishwakarma, R. K. Ingle","doi":"10.46565/jreas.2019.v04i04.005","DOIUrl":"https://doi.org/10.46565/jreas.2019.v04i04.005","url":null,"abstract":"Concrete pavements are largely constructed and promoted by government in recent years in India. Concrete pavements are preferred over bituminous pavements due to its low life cycle cost, durability and low maintenance. Design of plain jointed concrete pavement depends on the stress ratio (i.e. ratio of flexural stress to flexural strength). Flexural stress calculation is influenced by many parameters like stiffness of soil subgrade, vehicle axle loads, environmental loads, location of load placement, load arrangement, tyre pressure, material properties of concrete, design period, repetition of loads and slab size. It is very important to estimate errorless response of pavement for given practical conditions. A study has been carried out on important parameters that affects the design of plain jointed concrete pavement. Study shows that finite element analysis should be done to obtain the critical flexural stresses as many widely used guidelines are based on many assumptions.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"35 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90761585","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-10-15DOI: 10.46565/jreas.2018.v03i04.005
Y. Nandurkar, S. Akant, S. Bankar
The Automation of processes plays a crucial role in improving the overall productivity of Industry. This paper give idea about the live industrial problem of EXCEL INDUSTRIES. It is the electrically automated, mechanically designed model of automatic plastic pipe cutting machine. The main aim is to improve the overall productivity by decreasing the manpower cost, utility cost and improving quality and quantity of production. Quality of production is improved by making the manual cutting operation fully automated ensuring the repeatability of the process with accuracy and precision. This ensures elimination of human error and monotonous work. Quantity of production is improved by avoiding manual delays and achieve quick response time of machine. It also focuses on optimum use of power provided for cutting operation.
{"title":"DESIGN AND FABRICATION OFAUTOMATICPLASTIC PIPE CUTTING MACHINE","authors":"Y. Nandurkar, S. Akant, S. Bankar","doi":"10.46565/jreas.2018.v03i04.005","DOIUrl":"https://doi.org/10.46565/jreas.2018.v03i04.005","url":null,"abstract":"The Automation of processes plays a crucial role in improving the overall productivity of Industry. This paper give idea about the live industrial problem of EXCEL INDUSTRIES. It is the electrically automated, mechanically designed model of automatic plastic pipe cutting machine. The main aim is to improve the overall productivity by decreasing the manpower cost, utility cost and improving quality and quantity of production. Quality of production is improved by making the manual cutting operation fully automated ensuring the repeatability of the process with accuracy and precision. This ensures elimination of human error and monotonous work. Quantity of production is improved by avoiding manual delays and achieve quick response time of machine. It also focuses on optimum use of power provided for cutting operation.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"20 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-10-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89212325","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-10-15DOI: 10.46565/jreas.2018.v03i04.002
S. Adhau, P. Adhau, X. Pote, V. Rajguru
There is a required research on use of alternate energy sources due to fast vast exhaustion of fossil fuel resources. Solar power or Wind power alone can fluctuate and result in reduced efficiency and poor reliability. A wind-solar hybrid system is a reliable alternative energy source that is, both systems are dependable and consistent. This paper bids with hybrid distributed generator mainly based on photovoltaic and wind driven Permanent Magnet Synchronous Generator (PMSG). In this, distributed generator system (DGs), the sources are connected to the grid with the assistance of only one boost converter through an inverter. This paper is focused on new topology, the hybrid dispensed generator having photovoltaic (PV) array which is instantly connected to dc link instead of being accompanying via a dc-dc converter. As compared to ancient scheme, this scheme finds that it requires less number of power converters, and therefore complexity for controller is reduced, also switching and conduction losses would be reduced. For monitoring maximum energy and maintaining the dc link, in addition to grid side parameters, the three different controllers are implemented under the influence of the different transient conditions. The performance of the system under various condition is studied, and modelling and simulation of photovoltaic and wind driven permanent magnet synchronous generator, also balancing the parameters of grid side has been analyzed in MATLAB-SIMULINK.
{"title":"SOME CONTROL STRATEGIES FOR GRID CONNECTED HYBRIDSOLAR- PVAND WIND POWER GENERATING SYSTEM","authors":"S. Adhau, P. Adhau, X. Pote, V. Rajguru","doi":"10.46565/jreas.2018.v03i04.002","DOIUrl":"https://doi.org/10.46565/jreas.2018.v03i04.002","url":null,"abstract":"There is a required research on use of alternate energy sources due to fast vast exhaustion of fossil fuel resources. Solar power or Wind power alone can fluctuate and result in reduced efficiency and poor reliability. A wind-solar hybrid system is a reliable alternative energy source that is, both systems are dependable and consistent. This paper bids with hybrid distributed generator mainly based on photovoltaic and wind driven Permanent Magnet Synchronous Generator (PMSG). In this, distributed generator system (DGs), the sources are connected to the grid with the assistance of only one boost converter through an inverter. This paper is focused on new topology, the hybrid dispensed generator having photovoltaic (PV) array which is instantly connected to dc link instead of being accompanying via a dc-dc converter. As compared to ancient scheme, this scheme finds that it requires less number of power converters, and therefore complexity for controller is reduced, also switching and conduction losses would be reduced. For monitoring maximum energy and maintaining the dc link, in addition to grid side parameters, the three different controllers are implemented under the influence of the different transient conditions. The performance of the system under various condition is studied, and modelling and simulation of photovoltaic and wind driven permanent magnet synchronous generator, also balancing the parameters of grid side has been analyzed in MATLAB-SIMULINK.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"308 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-10-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73872192","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-10-15DOI: 10.46565/jreas.2018.v03i04.006
Y. Kale, Neha Lidbe, J. Gajbhiye, Avadhi Ashtikar, Alisha Patil
The aim of this article is to conserve water and electricity used in household application particularly in lavatory with next generation technology that is IoT (Internet of Things). Further study on saving of the existing lavatory that should be improved in terms of electricity and water consumption. The microcontroller ATmega328 is used to interface the switch of light, exhaust fan and the inlet valve of water supply. The PIR sensor is used to detect the motion of user inside the lavatory. This will reduce human efforts to control the switch manually by applying this innovative idea in real life scenario, this design can be successfully brought into implementation. The saving in term of water and electricity is presented as results of improvement.
{"title":"IoT BASED HARDWARE REALISATION FORWATER AND ELECTRICITY SAVING APPLIEDTO HOUSEHOLD APPLICATION","authors":"Y. Kale, Neha Lidbe, J. Gajbhiye, Avadhi Ashtikar, Alisha Patil","doi":"10.46565/jreas.2018.v03i04.006","DOIUrl":"https://doi.org/10.46565/jreas.2018.v03i04.006","url":null,"abstract":"The aim of this article is to conserve water and electricity used in household application particularly in lavatory with next generation technology that is IoT (Internet of Things). Further study on saving of the existing lavatory that should be improved in terms of electricity and water consumption. The microcontroller ATmega328 is used to interface the switch of light, exhaust fan and the inlet valve of water supply. The PIR sensor is used to detect the motion of user inside the lavatory. This will reduce human efforts to control the switch manually by applying this innovative idea in real life scenario, this design can be successfully brought into implementation. The saving in term of water and electricity is presented as results of improvement.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"26 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-10-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86015133","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-10-15DOI: 10.46565/jreas.2018.v03i04.001
Noorah Alanizy, Alanood Alanizy, Noura Baghoza, M. Alghamdi, A. Gutub
In today's scenario, one of the biggest challenges facing computer users is how to secure data on a personal computer or in any communication. Various forms of data security and hiding algorithms have been developed in the last decade. Cryptography and steganography are known familiar security methods to be used for hide sensitive data. In this paper, we have developed a data hiding method in images with three security layers. The first layer is compression to reduces the redundancy in data representation, i.e. to decrease the storage capacity required for that sensitive data. The second layer is cryptography using the Advance Encryption Standard (AES) to make the compressed data unusable. The third layer hides the data in the 2 least significant bits (LSB) of images presenting high 3-layers security scheme. The results proven interesting outcomes compared to other methods. This 3-layer technique is showing promising research direction for further text security developments to be coming in the future.
{"title":"3-LAYER PC TEXT SECURITYVIA COMBININGCOMPRESSION, AES CRYPTOGRAPHY2LSB IMAGE STEGANOGRAPHY","authors":"Noorah Alanizy, Alanood Alanizy, Noura Baghoza, M. Alghamdi, A. Gutub","doi":"10.46565/jreas.2018.v03i04.001","DOIUrl":"https://doi.org/10.46565/jreas.2018.v03i04.001","url":null,"abstract":"In today's scenario, one of the biggest challenges facing computer users is how to secure data on a personal computer or in any communication. Various forms of data security and hiding algorithms have been developed in the last decade. Cryptography and steganography are known familiar security methods to be used for hide sensitive data. In this paper, we have developed a data hiding method in images with three security layers. The first layer is compression to reduces the redundancy in data representation, i.e. to decrease the storage capacity required for that sensitive data. The second layer is cryptography using the Advance Encryption Standard (AES) to make the compressed data unusable. The third layer hides the data in the 2 least significant bits (LSB) of images presenting high 3-layers security scheme. The results proven interesting outcomes compared to other methods. This 3-layer technique is showing promising research direction for further text security developments to be coming in the future.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"21 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-10-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80294481","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-10-15DOI: 10.46565/jreas.2018.v03i04.003
Pravin Tajane, P. L. Zade
The proposed planar antenna with different asymmetrically hanging type arms for WLAN /Bluetooth/ Zigbee/ WiMAX/ HYPERLAN and Military applications.The proposed antenna consists asymmetrically three arms and defected ground plane to resonates 2.44GHz, 3.4GHz 5.3GHz and 7.5GHz cover WLAN,Bluetooth, Zigbee, WiMAX , HYPERLAN and Military applications. The dimension of antenna is 32×12×1.6mm3 .The fabricated antenna shows good measured results for the multiband operation as per simulated.
{"title":"PLANAR ANTENNA FOR WLAN /BLUETOOTH /ZIGBEE /WIMAX / HYPERLAN ANDMILITARYAPPLICATIONS","authors":"Pravin Tajane, P. L. Zade","doi":"10.46565/jreas.2018.v03i04.003","DOIUrl":"https://doi.org/10.46565/jreas.2018.v03i04.003","url":null,"abstract":"The proposed planar antenna with different asymmetrically hanging type arms for WLAN /Bluetooth/ Zigbee/ WiMAX/ HYPERLAN and Military applications.The proposed antenna consists asymmetrically three arms and defected ground plane to resonates 2.44GHz, 3.4GHz 5.3GHz and 7.5GHz cover WLAN,Bluetooth, Zigbee, WiMAX , HYPERLAN and Military applications. The dimension of antenna is 32×12×1.6mm3 .The fabricated antenna shows good measured results for the multiband operation as per simulated.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"49 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-10-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83127116","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-07-15DOI: 10.46565/jreas.2018.v03i03.004
A. K. Singh, S. A. Dahat, R. Somalwar
In recent converter technology, same of energy loss in inductor used in that converter. So, Efficiency of converter is reduces because of this loss energy. This loss is minimizing by using coupled inductor with switch capacitor. The recommended structure consist voltage multiplier circuits with coupled inductor to get maximum voltage gain. Two capacitors are charged amid the turn off period utilizing stored energy of coupled inductor windings which helps to increase the voltage conversion efficiency. The leakage inductive current is recycled through the clamp circuit because of that the voltage stress on switch is reduced and durability of converter will increase as well as efficiency. In this paper, Converter in view of Coupled inductor and Switch Capacitor is analyzed by using MATLAB SIMULINK and hardware implementation.
{"title":"ANALYSIS OF CONVERTER BASED COUPLED –INDUCTORWITH SWITCH CAPACITOR","authors":"A. K. Singh, S. A. Dahat, R. Somalwar","doi":"10.46565/jreas.2018.v03i03.004","DOIUrl":"https://doi.org/10.46565/jreas.2018.v03i03.004","url":null,"abstract":"In recent converter technology, same of energy loss in inductor used in that converter. So, Efficiency of converter is reduces because of this loss energy. This loss is minimizing by using coupled inductor with switch capacitor. The recommended structure consist voltage multiplier circuits with coupled inductor to get maximum voltage gain. Two capacitors are charged amid the turn off period utilizing stored energy of coupled inductor windings which helps to increase the voltage conversion efficiency. The leakage inductive current is recycled through the clamp circuit because of that the voltage stress on switch is reduced and durability of converter will increase as well as efficiency. In this paper, Converter in view of Coupled inductor and Switch Capacitor is analyzed by using MATLAB SIMULINK and hardware implementation.","PeriodicalId":14343,"journal":{"name":"International Journal of Research in Engineering and Applied Sciences","volume":"21 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86721594","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：