Pub Date : 2022-06-26DOI: 10.31544/jtera.v7.i1.2022.157-162
W. Ibrahim, Syah Alam, Indra Surjati
metode slot inset bertujuan return loss dan bandwidth . penelitian ini didapatkan peningkatan return loss sebesar 73,2% peningkatan bandwidth sebesar 15,1%. Kata kunci: antena, bandwidth, inset , return loss , mikrostrip, slot Abstract The fifth-generation (5G) communication system was introduced in 2018 and has advantages such as high data transfer rates and very wide bandwidth. Microstrip antenna is an antenna that has advantages such as compact, low cost of fabrication and capable to work at high frequencies. However, microstrip antennas have disadvantages such as narrow bandwidth. This research discusses about improvement performance of the square microstrip antenna with the slot M and the inset that work at frequency of 15 GHz in order to increase the return loss and bandwidth. The results of this study showed an increase in the return loss of 73.2% and bandwidth of 15.1%.
Metode槽插入bertujuan返回损失丹带宽。Penelitian ini didapatkan peningkatan return loss sebesar 73,2% peningkatan bandwidth sebesar 15.1 %。摘要第五代(5G)通信系统于2018年推出，具有高数据传输速率和非常宽的带宽等优点。微带天线是一种具有结构紧凑、制造成本低、工作频率高等优点的天线。然而，微带天线具有带宽窄等缺点。本研究讨论了在15ghz频率下工作的M槽和插片方形微带天线的性能改进，以增加回波损耗和带宽。研究结果表明，回波损耗增加73.2%，带宽增加15.1%。
{"title":"Peningkatan Performansi Desain Antena Mikrostrip dengan Penambahan Slot M dan Inset untuk Komunikasi 5G","authors":"W. Ibrahim, Syah Alam, Indra Surjati","doi":"10.31544/jtera.v7.i1.2022.157-162","DOIUrl":"https://doi.org/10.31544/jtera.v7.i1.2022.157-162","url":null,"abstract":"metode slot inset bertujuan return loss dan bandwidth . penelitian ini didapatkan peningkatan return loss sebesar 73,2% peningkatan bandwidth sebesar 15,1%. Kata kunci: antena, bandwidth, inset , return loss , mikrostrip, slot Abstract The fifth-generation (5G) communication system was introduced in 2018 and has advantages such as high data transfer rates and very wide bandwidth. Microstrip antenna is an antenna that has advantages such as compact, low cost of fabrication and capable to work at high frequencies. However, microstrip antennas have disadvantages such as narrow bandwidth. This research discusses about improvement performance of the square microstrip antenna with the slot M and the inset that work at frequency of 15 GHz in order to increase the return loss and bandwidth. The results of this study showed an increase in the return loss of 73.2% and bandwidth of 15.1%.","PeriodicalId":17680,"journal":{"name":"JTERA (Jurnal Teknologi Rekayasa)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91403517","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-26DOI: 10.31544/jtera.v7.i1.2022.121-126
Aura Dhia Rizki Atthar, M. Sari, I. Septiariva, I. W. Suryawan
Health facilities such as hospitals produce medical waste and non-medical waste. Improper management of medical waste can cause the spread of infectious nature, especially during the Covid-19 pandemic. Therefore, management at the source, such as minimization and containment, is important and must be evaluated. This study evaluates hospital medical waste management based on minimization and containment efforts. This research was conducted by direct observation and literature review. The findings on minimization efforts are following regulations such as reducing the use of materials containing hazardous and toxic materials if there is a choice, avoiding accumulation and expiration of the procurement of chemicals and pharmaceuticals, and separating non-medical and medical waste according to the waste category. The container also meets the standard where the container is equipped with a cover and is made of puncture-resistant material. The containers are also equipped with bags and symbols according to the characteristics of the waste with internal transportation at least once a day or when the container has been filled. Garbage officers prepare medical waste handover documents. Transportation from the production source to the temporary shelter (TPS) uses a yellow trolley with a biohazard symbol, tightly closed with a predetermined route, and cleaning and disinfection are carried out on the trolleys that are used every day.
{"title":"Evaluation of Minimization and Storage Management of Medical Waste at Hospital X Jakarta during the Covid-19 Pandemic","authors":"Aura Dhia Rizki Atthar, M. Sari, I. Septiariva, I. W. Suryawan","doi":"10.31544/jtera.v7.i1.2022.121-126","DOIUrl":"https://doi.org/10.31544/jtera.v7.i1.2022.121-126","url":null,"abstract":"Health facilities such as hospitals produce medical waste and non-medical waste. Improper management of medical waste can cause the spread of infectious nature, especially during the Covid-19 pandemic. Therefore, management at the source, such as minimization and containment, is important and must be evaluated. This study evaluates hospital medical waste management based on minimization and containment efforts. This research was conducted by direct observation and literature review. The findings on minimization efforts are following regulations such as reducing the use of materials containing hazardous and toxic materials if there is a choice, avoiding accumulation and expiration of the procurement of chemicals and pharmaceuticals, and separating non-medical and medical waste according to the waste category. The container also meets the standard where the container is equipped with a cover and is made of puncture-resistant material. The containers are also equipped with bags and symbols according to the characteristics of the waste with internal transportation at least once a day or when the container has been filled. Garbage officers prepare medical waste handover documents. Transportation from the production source to the temporary shelter (TPS) uses a yellow trolley with a biohazard symbol, tightly closed with a predetermined route, and cleaning and disinfection are carried out on the trolleys that are used every day.","PeriodicalId":17680,"journal":{"name":"JTERA (Jurnal Teknologi Rekayasa)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87298915","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-26DOI: 10.31544/jtera.v7.i1.2022.127-134
E. Andika, Lani Nurlani, Samirah Rahayu, Ilyas Yasirudin
Monitoring information on tuition payments at an educational institution is an important part to support the activities in that agency. Information can be obtained from reporting and search results. To facilitate the presentation of information, it is necessary to have a system that manages these financial activities, therefore a web-based SPP payment information system is built that will be easily accessed from anywhere. In addition to management, this information system is designed so that students' parents can obtain information about bills and arrears. Telegram bots are an alternative for parents to get information about billing and payment information that can be accessed through the Telegram Messenger application so that it is more practical and interactive. The method used in developing this system is RAD (Rapid Application Development) and the framework used to build this information system is Laravel. The result of this research is that with this information system, the process of managing SPP payment data becomes easier and more effective, as well as accessing the information more practically and flexibly.
{"title":"Pemanfaatan Telegram Bot pada Sistem Informasi Pembayaran SPP","authors":"E. Andika, Lani Nurlani, Samirah Rahayu, Ilyas Yasirudin","doi":"10.31544/jtera.v7.i1.2022.127-134","DOIUrl":"https://doi.org/10.31544/jtera.v7.i1.2022.127-134","url":null,"abstract":"Monitoring information on tuition payments at an educational institution is an important part to support the activities in that agency. Information can be obtained from reporting and search results. To facilitate the presentation of information, it is necessary to have a system that manages these financial activities, therefore a web-based SPP payment information system is built that will be easily accessed from anywhere. In addition to management, this information system is designed so that students' parents can obtain information about bills and arrears. Telegram bots are an alternative for parents to get information about billing and payment information that can be accessed through the Telegram Messenger application so that it is more practical and interactive. The method used in developing this system is RAD (Rapid Application Development) and the framework used to build this information system is Laravel. The result of this research is that with this information system, the process of managing SPP payment data becomes easier and more effective, as well as accessing the information more practically and flexibly.","PeriodicalId":17680,"journal":{"name":"JTERA (Jurnal Teknologi Rekayasa)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91233034","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-26DOI: 10.31544/jtera.v7.i1.2022.107-114
A. Husein, Abyan Ramzi, N. Muzakki, Rahmawati Hasanah
model (COCO) model top 5 93,3% dibandingkan 90% , 50% Abstract Nowadays, chicken meat has become a good source of animal protein for consumption and easy to obtain. However, in the process of obtaining it, fraudulent practices are often found, such as tiren chicken meat that is still being sold, or chicken meat that has been mixed with meat that is not worth selling. Therefore, we need a tool or application that is able to detect the quality of raw chicken meat. The purpose of this study is to create a tool that is useful in detecting the quality of raw chicken meat by utilizing image processing using the InceptionV3 model and named Quameaty. This tool was developed using the Python programming language. The InceptionV3 model is an excellent convolutional neural network training model and has been pre-trained on the Common Objects in Context (COCO) dataset of 328,000 images with 81 different classes. This model has a very high level of accuracy as a pre-trained model with a top 5 accuracy value of 93.3% and a relatively fast computation time when compared to its predecessor model. The resulting training model is embedded in an Android application which can be easily and tends to be flexible to be used in detecting the quality of raw chicken meat. The results of the study were divided into two classes, namely fresh and rotten, and showed that the prediction of the quality of raw chicken meat went well with the test metric values that had reached more than 90% at two threshold values, namely 50% and 75%.
{"title":"Quameaty: Aplikasi Pendeteksi Kualitas Daging Ayam Mentah Berbasis Pengolahan Citra Menggunakan Model InceptionV3","authors":"A. Husein, Abyan Ramzi, N. Muzakki, Rahmawati Hasanah","doi":"10.31544/jtera.v7.i1.2022.107-114","DOIUrl":"https://doi.org/10.31544/jtera.v7.i1.2022.107-114","url":null,"abstract":"model (COCO) model top 5 93,3% dibandingkan 90% , 50% Abstract Nowadays, chicken meat has become a good source of animal protein for consumption and easy to obtain. However, in the process of obtaining it, fraudulent practices are often found, such as tiren chicken meat that is still being sold, or chicken meat that has been mixed with meat that is not worth selling. Therefore, we need a tool or application that is able to detect the quality of raw chicken meat. The purpose of this study is to create a tool that is useful in detecting the quality of raw chicken meat by utilizing image processing using the InceptionV3 model and named Quameaty. This tool was developed using the Python programming language. The InceptionV3 model is an excellent convolutional neural network training model and has been pre-trained on the Common Objects in Context (COCO) dataset of 328,000 images with 81 different classes. This model has a very high level of accuracy as a pre-trained model with a top 5 accuracy value of 93.3% and a relatively fast computation time when compared to its predecessor model. The resulting training model is embedded in an Android application which can be easily and tends to be flexible to be used in detecting the quality of raw chicken meat. The results of the study were divided into two classes, namely fresh and rotten, and showed that the prediction of the quality of raw chicken meat went well with the test metric values that had reached more than 90% at two threshold values, namely 50% and 75%.","PeriodicalId":17680,"journal":{"name":"JTERA (Jurnal Teknologi Rekayasa)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91014876","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-26DOI: 10.31544/jtera.v7.i1.2022.99-106
D. Kusumawardani, Citra Wiguna, Yudha Saintika
In a university the role of the chancellor is very important. Currently, the Telkom Purwokerto Institute of Technology (ITTP) is in the election stage for potential chancellor candidates because the previous chancellor’s term of office has ended, namely the 2017 to 2021 period. In electing the chancellor at ITTP, there are several obstacles faced, such as: data security aspects that are still not maintained, updates data or documents required for chancellor candidates and limited access to information during the offline pandemic period. In order to protect data from outside parties and to document the files of the prospective chancellor candidates in real time, a system is needed to facilitate the process of electing the chancellor. This study aims to develop an online rector election system. System development is carried out using the Scrum method. Every job is completed in a short period of time. Each sprint is a work from a backlog according to the required needs. The application of the Scrum approach is very effective in developing this chancellor election application. The results obtained from the application of Scrum are an online chancellor election system that can be developed according to the product backlog determined by the product owner.
{"title":"Implementasi Metode Scrum Pada Pengembangan Sistem Pemilihan Rektor Online","authors":"D. Kusumawardani, Citra Wiguna, Yudha Saintika","doi":"10.31544/jtera.v7.i1.2022.99-106","DOIUrl":"https://doi.org/10.31544/jtera.v7.i1.2022.99-106","url":null,"abstract":"In a university the role of the chancellor is very important. Currently, the Telkom Purwokerto Institute of Technology (ITTP) is in the election stage for potential chancellor candidates because the previous chancellor’s term of office has ended, namely the 2017 to 2021 period. In electing the chancellor at ITTP, there are several obstacles faced, such as: data security aspects that are still not maintained, updates data or documents required for chancellor candidates and limited access to information during the offline pandemic period. In order to protect data from outside parties and to document the files of the prospective chancellor candidates in real time, a system is needed to facilitate the process of electing the chancellor. This study aims to develop an online rector election system. System development is carried out using the Scrum method. Every job is completed in a short period of time. Each sprint is a work from a backlog according to the required needs. The application of the Scrum approach is very effective in developing this chancellor election application. The results obtained from the application of Scrum are an online chancellor election system that can be developed according to the product backlog determined by the product owner.","PeriodicalId":17680,"journal":{"name":"JTERA (Jurnal Teknologi Rekayasa)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83876337","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Routing Border Gateway Protocol (BGP) which functions as the backbone of the internet network by default does not have a strong security mechanism. There are often cases where BGP routing running on the internet experiences hijacking of its network route or misconfiguration either intentionally or unintentionally on BGP route information which causes the internet network to fail or be inaccessible. The implementation of BGP with Resource Public Key Infrastructure (RPKI) will allow a network to filter existing routes so that its existence can make internet networks that use BGP directed to only valid routes and avoid piracy of invalid route information. This study seeks to measure the performance of the BGP RPKI at PT Time Excelindo. Implementation of BGP RPKI to increase CPU and device memory usage by 3.6% and 0.75% and reduce router input power in receiving incoming prefix information by 1.15%. In addition, in terms of network quality, after implementing BGP RPKI, the download and upload values decreased by 0.11 Mbps and 0.02 Mbps plus an increase in the latency value of 0.13 ms.
{"title":"Analisis Performansi BGP Resource Public Key Infrastructure Studi Kasus PT. Time Excelindo","authors":"Nanda Iryani, Jafaruddin Gustri Amri Ginting, Dyas Dendi Andika","doi":"10.31544/jtera.v7.i1.2022.135-142","DOIUrl":"https://doi.org/10.31544/jtera.v7.i1.2022.135-142","url":null,"abstract":"Routing Border Gateway Protocol (BGP) which functions as the backbone of the internet network by default does not have a strong security mechanism. There are often cases where BGP routing running on the internet experiences hijacking of its network route or misconfiguration either intentionally or unintentionally on BGP route information which causes the internet network to fail or be inaccessible. The implementation of BGP with Resource Public Key Infrastructure (RPKI) will allow a network to filter existing routes so that its existence can make internet networks that use BGP directed to only valid routes and avoid piracy of invalid route information. This study seeks to measure the performance of the BGP RPKI at PT Time Excelindo. Implementation of BGP RPKI to increase CPU and device memory usage by 3.6% and 0.75% and reduce router input power in receiving incoming prefix information by 1.15%. In addition, in terms of network quality, after implementing BGP RPKI, the download and upload values decreased by 0.11 Mbps and 0.02 Mbps plus an increase in the latency value of 0.13 ms.","PeriodicalId":17680,"journal":{"name":"JTERA (Jurnal Teknologi Rekayasa)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79136176","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-26DOI: 10.31544/jtera.v7.i1.2022.47-56
S. Sutrisno, Vitrasia Vitrasia, Hanny Madiawati
People who live in rural areas still often face problems or obstacles in accessing information via the internet. The common problem they face is poor Internet Service Provider (ISP) service provider connectivity, such as network drops and slowness. The purpose of this study is to build a prototype internet access network for people living in rural areas using two microwave radio links based on Ethernet over Plesiochronous Digital Hierarchy (PDH) technology as a backhaul connected to an ISP. The method used to integrate the two radio links is to use the load balancing method which is a feature found on the Mikrotik router that functions to combine internet traffic from both ISPs simultaneously and channel it to a local network provided for public internet access. Apart from that, the load balancing router also functions as a protection system where if one of the traffic drops which may be caused by an outage (dead) radio link or a service from an ISP that dies, it is hoped that the traffic will still be there so that users can still get internet service. Based on the results of testing and measurements with a traffic data rate of 1.3 Mbps, it can be concluded that this research was successful in building a prototype of a reliable and stable internet access network for the public to obtain information.
{"title":"Prototipe Jaringan Akses Internet Dengan Menggabungkan Dua Link Radio Microwave Menggunakan Metode Load Balancing","authors":"S. Sutrisno, Vitrasia Vitrasia, Hanny Madiawati","doi":"10.31544/jtera.v7.i1.2022.47-56","DOIUrl":"https://doi.org/10.31544/jtera.v7.i1.2022.47-56","url":null,"abstract":"People who live in rural areas still often face problems or obstacles in accessing information via the internet. The common problem they face is poor Internet Service Provider (ISP) service provider connectivity, such as network drops and slowness. The purpose of this study is to build a prototype internet access network for people living in rural areas using two microwave radio links based on Ethernet over Plesiochronous Digital Hierarchy (PDH) technology as a backhaul connected to an ISP. The method used to integrate the two radio links is to use the load balancing method which is a feature found on the Mikrotik router that functions to combine internet traffic from both ISPs simultaneously and channel it to a local network provided for public internet access. Apart from that, the load balancing router also functions as a protection system where if one of the traffic drops which may be caused by an outage (dead) radio link or a service from an ISP that dies, it is hoped that the traffic will still be there so that users can still get internet service. Based on the results of testing and measurements with a traffic data rate of 1.3 Mbps, it can be concluded that this research was successful in building a prototype of a reliable and stable internet access network for the public to obtain information.","PeriodicalId":17680,"journal":{"name":"JTERA (Jurnal Teknologi Rekayasa)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82358179","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-26DOI: 10.31544/jtera.v7.i1.2022.115-120
Nur Halimah, Hanny Madiawati
The development of telecommunication technology in the field of cellular networks has now entered the 5th generation or 5G. This 5G application has more capable performance than the previous generation so that antenna specifications with wide bandwidth and large gain are needed. The antenna that can be used is microstrip antenna. Microstrip antennas have the advantages of having a light mass, practical, and easy to fabricate. However, there are disadvantages in the parameters obtained, such as narrow bandwidth and small gain. To overcome these disadvantages, you can use the air gap method, where the method can be used to widen bandwidth and increase gain. In this study, optimization has been successfully carried out on the microstrip array antenna using the airgap method at a frequency of 3.5 GHz. The results of the optimization during simulation obtained an increase in bandwidth of 54.28% and an increase in gain of 32.86%. For the realization results, a bandwidth of 280 MHz, and a gain of 9.3 dB were obtained. The substrate used in this antenna is FR4 which has a dielectric constant of 4.4, thickness of 1.6 mm, and loss tangent of 0.019.
{"title":"Optimasi Antena Mikrostrip Array menggunakan Metode Air Gap pada Frekuensi 3,5 GHz","authors":"Nur Halimah, Hanny Madiawati","doi":"10.31544/jtera.v7.i1.2022.115-120","DOIUrl":"https://doi.org/10.31544/jtera.v7.i1.2022.115-120","url":null,"abstract":"The development of telecommunication technology in the field of cellular networks has now entered the 5th generation or 5G. This 5G application has more capable performance than the previous generation so that antenna specifications with wide bandwidth and large gain are needed. The antenna that can be used is microstrip antenna. Microstrip antennas have the advantages of having a light mass, practical, and easy to fabricate. However, there are disadvantages in the parameters obtained, such as narrow bandwidth and small gain. To overcome these disadvantages, you can use the air gap method, where the method can be used to widen bandwidth and increase gain. In this study, optimization has been successfully carried out on the microstrip array antenna using the airgap method at a frequency of 3.5 GHz. The results of the optimization during simulation obtained an increase in bandwidth of 54.28% and an increase in gain of 32.86%. For the realization results, a bandwidth of 280 MHz, and a gain of 9.3 dB were obtained. The substrate used in this antenna is FR4 which has a dielectric constant of 4.4, thickness of 1.6 mm, and loss tangent of 0.019.","PeriodicalId":17680,"journal":{"name":"JTERA (Jurnal Teknologi Rekayasa)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84091938","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-26DOI: 10.31544/jtera.v7.i1.2022.31-38
Y. B. G. Sugiarta, Feni Isdaryani, D. Andini, Rina Hikmawati
A Field Programmable Gate Array (FPGA) is a semiconductor component based on a matrix of user-configurable logic blocks connected through programmable interconnects. FPGA can be programmed according to the application or function required by the user. To support science in the field of electronic engineering, it is necessary to have learning media regarding the basic use and application of FPGA. Therefore, in this study, an ON-OFF control simulator module was made using an FPGA. There are two approaches used in building ON-OFF control, namely pure ON-OFF and ON-OFF using delay time, where this delay time is defined using counter logic. All control algorithm designs use the VHSIC Hardware Description Language (VHDL) description. The implementation results show that the response can be in accordance with the desired conditions. For the ON-OFF condition with counter logic, the DC motor can be ON for 5 seconds then OFF automatically according to the desired behaviour.
{"title":"Implementasi Sistem Kendali ON-OFF pada Field Programmable Gate Array (FPGA)","authors":"Y. B. G. Sugiarta, Feni Isdaryani, D. Andini, Rina Hikmawati","doi":"10.31544/jtera.v7.i1.2022.31-38","DOIUrl":"https://doi.org/10.31544/jtera.v7.i1.2022.31-38","url":null,"abstract":"A Field Programmable Gate Array (FPGA) is a semiconductor component based on a matrix of user-configurable logic blocks connected through programmable interconnects. FPGA can be programmed according to the application or function required by the user. To support science in the field of electronic engineering, it is necessary to have learning media regarding the basic use and application of FPGA. Therefore, in this study, an ON-OFF control simulator module was made using an FPGA. There are two approaches used in building ON-OFF control, namely pure ON-OFF and ON-OFF using delay time, where this delay time is defined using counter logic. All control algorithm designs use the VHSIC Hardware Description Language (VHDL) description. The implementation results show that the response can be in accordance with the desired conditions. For the ON-OFF condition with counter logic, the DC motor can be ON for 5 seconds then OFF automatically according to the desired behaviour.","PeriodicalId":17680,"journal":{"name":"JTERA (Jurnal Teknologi Rekayasa)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80040083","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：