Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075803
S. Kumpalavalee, T. Suwanasri, C. Suwanasri, S. Wattanawongpitak, Taratorn Sooksodkiao, Pornthep Tanprasert, Bhakbhum Kaewkamthong
This paper proposes the techniques for evaluating power transformer condition based on frequently updated test results. According to planned maintenance, insulation oil is regularly sampled and analyzed in laboratory to determine problems inside main tank by dissolved gas analysis as well as dielectric breakdown voltage test to determine dielectric property of the oil. The dissolved gas analysis is firstly compared with limit values of gases in IEC standard. If values of gases exceed normal condition, the dissolved gases are analyzed by using Duval triangle while dielectric breakdown voltage criterion is reference with the IEC standard. These two methods are subsequently implemented in Microsoft Excel and Visual Basic for Application to evaluate the condition of power transformer and dielectric strength of insulating oil.
本文提出了基于频繁更新试验结果的电力变压器状态评估技术。根据计划维修，定期在实验室取样分析绝缘油，通过溶解气体分析和介质击穿电压测试确定主油箱内的问题，确定绝缘油的介电性能。首先将溶解气体分析与IEC标准中气体的限值进行了比较。当气体值超过正常状态时，采用杜瓦尔三角法对溶解气体进行分析，介质击穿电压判据参照IEC标准。随后在Microsoft Excel和Visual Basic for Application中实现了这两种方法，对电力变压器的状况和绝缘油的介电强度进行了评估。
{"title":"Condition evaluation of power transformers using dissolved gas analysis and dielectric breakdown voltage test","authors":"S. Kumpalavalee, T. Suwanasri, C. Suwanasri, S. Wattanawongpitak, Taratorn Sooksodkiao, Pornthep Tanprasert, Bhakbhum Kaewkamthong","doi":"10.1109/IEECON.2017.8075803","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075803","url":null,"abstract":"This paper proposes the techniques for evaluating power transformer condition based on frequently updated test results. According to planned maintenance, insulation oil is regularly sampled and analyzed in laboratory to determine problems inside main tank by dissolved gas analysis as well as dielectric breakdown voltage test to determine dielectric property of the oil. The dissolved gas analysis is firstly compared with limit values of gases in IEC standard. If values of gases exceed normal condition, the dissolved gases are analyzed by using Duval triangle while dielectric breakdown voltage criterion is reference with the IEC standard. These two methods are subsequently implemented in Microsoft Excel and Visual Basic for Application to evaluate the condition of power transformer and dielectric strength of insulating oil.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114723556","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075741
Sudheer Vinnakoti, Venkata Reddy Kota
A conventional Unified Power Quality Conditioner (UPQC) is a back-to-back shunt and series converters with a dc-link capacitor, requires 12 switches to resolve voltage and current related power quality issues. Recently a nine-switch UPQC (NS-UPQC) is proposed, but suffers with certain limitations like limited reference amplitude and phase shift, twice the rated dc-link voltage and increased stress on the semiconductor devices. To overcome these issues, in this paper nine-switch UPQC (NS-UPQC) is investigated using Synchronous Reference Frame (SRF) and Real Power Theory (P-Theory) with harmonic extraction based control schemes. The nine-switch UPQC (NS-UPQC) model with the proposed control schemes are developed in Matlab/Simulink software and its performance is examined under various conditions like load voltage and supply current harmonics, supply unbalanced currents, voltage sag/swell. %THDs of voltage and current are also analyzed in this work.
{"title":"SRF and real power theory based control of a nine switch converter based UPQC","authors":"Sudheer Vinnakoti, Venkata Reddy Kota","doi":"10.1109/IEECON.2017.8075741","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075741","url":null,"abstract":"A conventional Unified Power Quality Conditioner (UPQC) is a back-to-back shunt and series converters with a dc-link capacitor, requires 12 switches to resolve voltage and current related power quality issues. Recently a nine-switch UPQC (NS-UPQC) is proposed, but suffers with certain limitations like limited reference amplitude and phase shift, twice the rated dc-link voltage and increased stress on the semiconductor devices. To overcome these issues, in this paper nine-switch UPQC (NS-UPQC) is investigated using Synchronous Reference Frame (SRF) and Real Power Theory (P-Theory) with harmonic extraction based control schemes. The nine-switch UPQC (NS-UPQC) model with the proposed control schemes are developed in Matlab/Simulink software and its performance is examined under various conditions like load voltage and supply current harmonics, supply unbalanced currents, voltage sag/swell. %THDs of voltage and current are also analyzed in this work.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128976418","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075733
P. Santiprapan, K. Areerak, Kongpan Areerak
This paper presents the design approach of the proportional plus resonant control for active power filter in three-phase four-wire system. The hardware implementation is used to test the harmonic elimination using an active power filter. The experimental results confirm that the proportional plus resonant controller can provide good performance in dynamic load condition.
{"title":"Proportional plus resonant control for active power filter in unbalanced system","authors":"P. Santiprapan, K. Areerak, Kongpan Areerak","doi":"10.1109/IEECON.2017.8075733","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075733","url":null,"abstract":"This paper presents the design approach of the proportional plus resonant control for active power filter in three-phase four-wire system. The hardware implementation is used to test the harmonic elimination using an active power filter. The experimental results confirm that the proportional plus resonant controller can provide good performance in dynamic load condition.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133575918","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075813
Wittawat Puangsaijai, S. Puntheeranurak
Nowadays, Demands of web scale are in increasing and growing rapidly. Mobile applications, web technologies, social media always generates unstructured data that had lead to the advent of various NoSQL databases. Therefore, Big data applications are necessary to have an efficient technology to collect these data. However, a relational database is the traditional database that always uses in many applications and still has more valuable to play a significant role in the current information system. The main characteristics of NoSQL databases are schema-free, no relationship, no need to join as a relational database. The business organization expects that NoSQL database has better performance than a relational database. In This paper, we aim to compare the performance of Redis, which is a key-value database, one kind of NoSQL database, and MariaDB, which is a popular relational database. We designed a set of experiments with a large amount of data and compared the efficiency of the insert, update, delete and select transactions from various aspects on the same dataset. We measure the processing time of each transaction to evaluate the comparison. The results have shown that Redis has better runtime performance for insert, delete, update transaction under a specific condition or complex queries. MariaDB still is good for some conditions especially when we have a small data. Our study can help to choose a database that will be suitable for the real world applications because relational databases and NoSQL databases have different strengths and weakness.
{"title":"A comparative study of relational database and key-value database for big data applications","authors":"Wittawat Puangsaijai, S. Puntheeranurak","doi":"10.1109/IEECON.2017.8075813","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075813","url":null,"abstract":"Nowadays, Demands of web scale are in increasing and growing rapidly. Mobile applications, web technologies, social media always generates unstructured data that had lead to the advent of various NoSQL databases. Therefore, Big data applications are necessary to have an efficient technology to collect these data. However, a relational database is the traditional database that always uses in many applications and still has more valuable to play a significant role in the current information system. The main characteristics of NoSQL databases are schema-free, no relationship, no need to join as a relational database. The business organization expects that NoSQL database has better performance than a relational database. In This paper, we aim to compare the performance of Redis, which is a key-value database, one kind of NoSQL database, and MariaDB, which is a popular relational database. We designed a set of experiments with a large amount of data and compared the efficiency of the insert, update, delete and select transactions from various aspects on the same dataset. We measure the processing time of each transaction to evaluate the comparison. The results have shown that Redis has better runtime performance for insert, delete, update transaction under a specific condition or complex queries. MariaDB still is good for some conditions especially when we have a small data. Our study can help to choose a database that will be suitable for the real world applications because relational databases and NoSQL databases have different strengths and weakness.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127744361","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075731
S. Kiravittaya, S. Thainoi, Zon, S. Ratanathammaphan, S. Kanjanachuchai, S. Panyakeow
This paper describes a route toward quantum state manipulation by using twin InSb/GaAs quantum dots (QDs) as building blocks. The discussion on the advantage of staggered (type-II) band alignment in InSb/GaAs heterojunction is given first. For the generation of coupled/entangled electronic state, symmetric twin is desired. However, asymmetric twin is typically expected from the fabrication point of view. The localized hole states might be tuned to delocalized ones by external electric and/or magnetic fields. In addition, control and read-out of the stored information in the state can be done via optical probe with laser spectroscopy. We present here an experimental realization of twin InSb/GaAs QDs by solid source molecular beam epitaxy. The InSb QDs are formed into both single and twin rectangular-based configurations.
{"title":"Toward quantum state manipulation in twin InSb/GaAs quantum dots","authors":"S. Kiravittaya, S. Thainoi, Zon, S. Ratanathammaphan, S. Kanjanachuchai, S. Panyakeow","doi":"10.1109/IEECON.2017.8075731","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075731","url":null,"abstract":"This paper describes a route toward quantum state manipulation by using twin InSb/GaAs quantum dots (QDs) as building blocks. The discussion on the advantage of staggered (type-II) band alignment in InSb/GaAs heterojunction is given first. For the generation of coupled/entangled electronic state, symmetric twin is desired. However, asymmetric twin is typically expected from the fabrication point of view. The localized hole states might be tuned to delocalized ones by external electric and/or magnetic fields. In addition, control and read-out of the stored information in the state can be done via optical probe with laser spectroscopy. We present here an experimental realization of twin InSb/GaAs QDs by solid source molecular beam epitaxy. The InSb QDs are formed into both single and twin rectangular-based configurations.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"73 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116309876","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075724
Jakkrit Pakdeeto, Kongpan Areerak, K. Areerak
Generally, the mathematical model of DC micro-grids (DCMGs) with bi-directional voltage source converter (VSC) is time-varying due to the switching action. The time-varying model is very complicated for controller design or stability analysis. As a result, this article presents how to derive the mathematical model using a combination between DQ method and the generalized state-space averaging method (GSSA) to achieve the time-invariant model. The time-invariant model is suitable for controller design or stability analysis via the basic control theory. The computer simulations with the SimPowerSystem™ on MATLAB program have been used for the model validation. The results show that the good accuracy of mathematical model in transient and steady-state responses can be obtained. Then, the resulting mathematical model can be used to design the controller or analyze the unstable point of the system in the future work.
{"title":"Large-signal model of DC micro-grid systems feeding a constant power load","authors":"Jakkrit Pakdeeto, Kongpan Areerak, K. Areerak","doi":"10.1109/IEECON.2017.8075724","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075724","url":null,"abstract":"Generally, the mathematical model of DC micro-grids (DCMGs) with bi-directional voltage source converter (VSC) is time-varying due to the switching action. The time-varying model is very complicated for controller design or stability analysis. As a result, this article presents how to derive the mathematical model using a combination between DQ method and the generalized state-space averaging method (GSSA) to achieve the time-invariant model. The time-invariant model is suitable for controller design or stability analysis via the basic control theory. The computer simulations with the SimPowerSystem™ on MATLAB program have been used for the model validation. The results show that the good accuracy of mathematical model in transient and steady-state responses can be obtained. Then, the resulting mathematical model can be used to design the controller or analyze the unstable point of the system in the future work.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129507552","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075725
Supachai Prainetr, S. Wangnippanto, Satean Tunyasirut
The maintenance and condition monitoring of induction machine are very important factors in saving cost and energy conservation in industries. This paper studied on a mechanical fault system using simulation and experimental detection of the eccentric fault in different levels of an induction motor. Analysis current signal and sound acoustic time-frequency domain with Fast Fourier applied to estimate fault harmonic signal, noise, caused by eccentricity. The comparison between the simulation and experimental base on criterion standard. The result shows that the faults increased proportionally in the eccentricity. To sum up, while the increase of harmonic current distortion in order 3rd, 5th, 7th and acoustic noise, also in analyzed fault, harmonic and acoustic noise is the relationship, an effect to a high-temperature efficiency of the induction motor will high-temperature efficiency of the induction motor will decreasing and energy consumption.
{"title":"Detection mechanical fault of induction motor using harmonic current and sound acoustic","authors":"Supachai Prainetr, S. Wangnippanto, Satean Tunyasirut","doi":"10.1109/IEECON.2017.8075725","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075725","url":null,"abstract":"The maintenance and condition monitoring of induction machine are very important factors in saving cost and energy conservation in industries. This paper studied on a mechanical fault system using simulation and experimental detection of the eccentric fault in different levels of an induction motor. Analysis current signal and sound acoustic time-frequency domain with Fast Fourier applied to estimate fault harmonic signal, noise, caused by eccentricity. The comparison between the simulation and experimental base on criterion standard. The result shows that the faults increased proportionally in the eccentricity. To sum up, while the increase of harmonic current distortion in order 3rd, 5th, 7th and acoustic noise, also in analyzed fault, harmonic and acoustic noise is the relationship, an effect to a high-temperature efficiency of the induction motor will high-temperature efficiency of the induction motor will decreasing and energy consumption.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"3 3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126004116","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075865
R. Punchalard
The LMS-based indirect frequency estimation algorithm (IFE) is reformulated using weighted least-square error criterion. Theoretical analyses for steady state bias and mean square error (MSE) are addressed. It has been shown that the proposed algorithm outperforms the conventional LMS-based algorithms in terms of convergence speed at the same value of MSE.
{"title":"Weighted least square based frequency estimation algorithm","authors":"R. Punchalard","doi":"10.1109/IEECON.2017.8075865","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075865","url":null,"abstract":"The LMS-based indirect frequency estimation algorithm (IFE) is reformulated using weighted least-square error criterion. Theoretical analyses for steady state bias and mean square error (MSE) are addressed. It has been shown that the proposed algorithm outperforms the conventional LMS-based algorithms in terms of convergence speed at the same value of MSE.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122433810","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075735
Sadanandam Perumandla, P. Upadhyay, A. Laxmi
This paper proposes fuzzy based Random Pulse Width Modulation (RPWM) technique to trim down the overriding harmonic clusters in the output current's spectrum. Asynchronous Motor is fed by PWM inverter and current is controlled by Field Oriented Control (FOC) algorithm. When an inverter with constant switching frequency is used, it would result in narrow-band harmonics. These harmonic clusters can make acoustic noises and Electromagnetic Interference (EMI). In order to diminish the noises and EMI consequence of these harmonic clusters, adaptive fuzzy controller based random-switching PWM strategies have been introduced. The concept of RPWM technique is to spread the original narrow-band harmonic throughout a wide range of frequencies. Acoustic noises and EMI are reduced uniformly in output current's spectrum. Proposed switching pattern is compared with conventional switching pattern that is proposed earlier. Simulation results of conventional and proposed method are obtained by using MATLAB/Simulink Software.
{"title":"Fuzzy based random pulse width modulation technique for performance improvement of induction motor","authors":"Sadanandam Perumandla, P. Upadhyay, A. Laxmi","doi":"10.1109/IEECON.2017.8075735","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075735","url":null,"abstract":"This paper proposes fuzzy based Random Pulse Width Modulation (RPWM) technique to trim down the overriding harmonic clusters in the output current's spectrum. Asynchronous Motor is fed by PWM inverter and current is controlled by Field Oriented Control (FOC) algorithm. When an inverter with constant switching frequency is used, it would result in narrow-band harmonics. These harmonic clusters can make acoustic noises and Electromagnetic Interference (EMI). In order to diminish the noises and EMI consequence of these harmonic clusters, adaptive fuzzy controller based random-switching PWM strategies have been introduced. The concept of RPWM technique is to spread the original narrow-band harmonic throughout a wide range of frequencies. Acoustic noises and EMI are reduced uniformly in output current's spectrum. Proposed switching pattern is compared with conventional switching pattern that is proposed earlier. Simulation results of conventional and proposed method are obtained by using MATLAB/Simulink Software.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114459756","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-03-08DOI: 10.1109/IEECON.2017.8075743
Bapayya Naidu Kommula, Venkata Reddy Kota
In this paper, a Single Ended Primary Inductor Converter (SEPIC) fed brushless dc motor (BLDCM) incorporated with a torque ripple minimization scheme is developed for enhancing the power factor at supply mains and reducing the torque ripples. By varying dc link voltage, speed of BLDCM is regulated. Generally, current ripple is responsible for the presence of ripple in commutation torque. By inserting an additional voltage source in non-commutating phase, ripple in current as well as ripple in commutation torque can also be eliminated. The proposed BLDCM drive can be designed to work with an extensive speed range management with an enhanced power quality at AC mains along with minimal torque ripples. In Matlab/Simulink environment, proposed SEPIC with torque ripple minimization method for BLDCM is developed and simulated. Finally, the effectiveness of proposed BLDCM drive is validated.
{"title":"PFC based SEPIC converter fed BLDC motor with torque ripple minimization approach","authors":"Bapayya Naidu Kommula, Venkata Reddy Kota","doi":"10.1109/IEECON.2017.8075743","DOIUrl":"https://doi.org/10.1109/IEECON.2017.8075743","url":null,"abstract":"In this paper, a Single Ended Primary Inductor Converter (SEPIC) fed brushless dc motor (BLDCM) incorporated with a torque ripple minimization scheme is developed for enhancing the power factor at supply mains and reducing the torque ripples. By varying dc link voltage, speed of BLDCM is regulated. Generally, current ripple is responsible for the presence of ripple in commutation torque. By inserting an additional voltage source in non-commutating phase, ripple in current as well as ripple in commutation torque can also be eliminated. The proposed BLDCM drive can be designed to work with an extensive speed range management with an enhanced power quality at AC mains along with minimal torque ripples. In Matlab/Simulink environment, proposed SEPIC with torque ripple minimization method for BLDCM is developed and simulated. Finally, the effectiveness of proposed BLDCM drive is validated.","PeriodicalId":196081,"journal":{"name":"2017 International Electrical Engineering Congress (iEECON)","volume":"57 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134313819","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：