Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603655
Xiang Lin, Faqiang Wang
A novel bridgeless Buck power factor correction (PFC) converter with only half dead zones is proposed in this paper. The operation of the proposed PFC converter can be divided into two different modes including Buck mode in positive line cycles and Cuk mode in negative line cycles. Compared with the bridge or bridgeless Buck PFC converter, only half dead zones occur in this proposed PFC converter under the same input and output voltage leading to a higher power factor (PF). This bridgeless PFC converter is designed to work in discontinues conduction mode (DCM). The comparison of performance between the conventional Buck PFC converter and this novel PFC converter has been presented by PSIM simulations and experiments.
{"title":"A novel bridgeless buck PFC converter with half dead zones","authors":"Xiang Lin, Faqiang Wang","doi":"10.1109/ICIEA.2016.7603655","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603655","url":null,"abstract":"A novel bridgeless Buck power factor correction (PFC) converter with only half dead zones is proposed in this paper. The operation of the proposed PFC converter can be divided into two different modes including Buck mode in positive line cycles and Cuk mode in negative line cycles. Compared with the bridge or bridgeless Buck PFC converter, only half dead zones occur in this proposed PFC converter under the same input and output voltage leading to a higher power factor (PF). This bridgeless PFC converter is designed to work in discontinues conduction mode (DCM). The comparison of performance between the conventional Buck PFC converter and this novel PFC converter has been presented by PSIM simulations and experiments.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115494087","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603612
Zheng Xin, Hongmei Li, Yaodong Li, Li Zhang
A set of measurement system for the testing of transmission lines, composing of wireless center station, wireless current acquisition and transmission nodes, wireless voltage acquisition and transmission node, was designed, which was based on wireless communication. The high speed wireless bridge working at 2.4GHz together with the clock synchronization module based on the IEEE1588 communicating protocol were both employed for the communication and time synchronization separately. The measurement system has data storage, waveform display, data analysis, automatic report generation and other functions. The test at a 500kV substation proves the validity and reliability of the measurement system. The measurement system can greatly reduced arrangement of cables, thereafter improved the test efficiency.
{"title":"Design and implement of measurement system for the testing of transmission lines based on wireless communication","authors":"Zheng Xin, Hongmei Li, Yaodong Li, Li Zhang","doi":"10.1109/ICIEA.2016.7603612","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603612","url":null,"abstract":"A set of measurement system for the testing of transmission lines, composing of wireless center station, wireless current acquisition and transmission nodes, wireless voltage acquisition and transmission node, was designed, which was based on wireless communication. The high speed wireless bridge working at 2.4GHz together with the clock synchronization module based on the IEEE1588 communicating protocol were both employed for the communication and time synchronization separately. The measurement system has data storage, waveform display, data analysis, automatic report generation and other functions. The test at a 500kV substation proves the validity and reliability of the measurement system. The measurement system can greatly reduced arrangement of cables, thereafter improved the test efficiency.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115726418","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603748
Cheng Yu, Chen Qinbi, Yu Bao
Performance, energy consumption and soft error have become parallel important design concerns for microprocessors. As the largest on-chip structures, cache memories play an impressive role in microprocessor design. The awareness of cache reliable energy-efficiency is highly important for microprocessor designers, especially at early design stage. The dynamic behavior of cache reliable energy-efficiency has been characterized, motivating the development of predicting reliable energy-efficiency to track runtime characteristics of cache. In this paper, a BART (Bayesian Additive Regression Trees) model is created to predict the reliable energy-efficiency of Level-1 data cache (L1D) accurately across different execution phases and benchmarks, as well as to illustrate the effects of performance metrics on L1D reliable energy-efficiency. Experimental results demonstrate the accuracy of BART in reliable energy-efficiency prediction, and present the intrinsic correlation between reliable energy-efficiency and the key performance metrics.
{"title":"BART-based prediction of cache reliable energy-efficiency","authors":"Cheng Yu, Chen Qinbi, Yu Bao","doi":"10.1109/ICIEA.2016.7603748","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603748","url":null,"abstract":"Performance, energy consumption and soft error have become parallel important design concerns for microprocessors. As the largest on-chip structures, cache memories play an impressive role in microprocessor design. The awareness of cache reliable energy-efficiency is highly important for microprocessor designers, especially at early design stage. The dynamic behavior of cache reliable energy-efficiency has been characterized, motivating the development of predicting reliable energy-efficiency to track runtime characteristics of cache. In this paper, a BART (Bayesian Additive Regression Trees) model is created to predict the reliable energy-efficiency of Level-1 data cache (L1D) accurately across different execution phases and benchmarks, as well as to illustrate the effects of performance metrics on L1D reliable energy-efficiency. Experimental results demonstrate the accuracy of BART in reliable energy-efficiency prediction, and present the intrinsic correlation between reliable energy-efficiency and the key performance metrics.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121823783","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603579
Xiaoyang Liu, Chao Liu, Wanping Liu, X. Zeng
High altitude platform station(HAPS) is a wireless repeater in the air. It can play a dominant role in observations, remote sensing and communication. The structure and composition of formation of HAPS are studied in this paper. The performance of the wireless communication link are researched. The simulation results shows that BER is relation to the bit each power and thermal noise power spectral density ratio and the power of receiver is proportional to the received power and thermal noise power ratio.
{"title":"The analysis of HAPS link budget and communication performance based on near space","authors":"Xiaoyang Liu, Chao Liu, Wanping Liu, X. Zeng","doi":"10.1109/ICIEA.2016.7603579","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603579","url":null,"abstract":"High altitude platform station(HAPS) is a wireless repeater in the air. It can play a dominant role in observations, remote sensing and communication. The structure and composition of formation of HAPS are studied in this paper. The performance of the wireless communication link are researched. The simulation results shows that BER is relation to the bit each power and thermal noise power spectral density ratio and the power of receiver is proportional to the received power and thermal noise power ratio.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116704043","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603687
Yu Guan, Yaoguang Hu, Rui Zhou
To keep competitive in the new dynamic market having more requirements in product various and delivery date, manufacturing companies need to make systems that not only response to market rapidly but also ensure delivery on time. Reconfigurable manufacturing system is a new paradigm to enhance the ability to response to the market rapidly and improve the performance rate. Capacity scalability is an important feature for reconfigurable manufacturing system. The effectiveness of an RMS depends on production scheduling and the time to reconfigure. According to the theory of constrains, bottleneck is the main factor to hinder the development of a manufacturing system. So the schedule and the adjustment of production capacity for bottleneck are really important in improving a manufacturing system performance. This paper focuses on the scheduling of bottleneck which can adjust production capacity and develops a model to solve this type problem. An adaptive genetic algorithm is used to solve the model. The aim of the problem is to find out the best schedule and device production capacity. Finally, an example is used to validate the results of the model and its solution procedure.
{"title":"Joint optimization of delivery constraint and capacity adjustment for electronic component production system","authors":"Yu Guan, Yaoguang Hu, Rui Zhou","doi":"10.1109/ICIEA.2016.7603687","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603687","url":null,"abstract":"To keep competitive in the new dynamic market having more requirements in product various and delivery date, manufacturing companies need to make systems that not only response to market rapidly but also ensure delivery on time. Reconfigurable manufacturing system is a new paradigm to enhance the ability to response to the market rapidly and improve the performance rate. Capacity scalability is an important feature for reconfigurable manufacturing system. The effectiveness of an RMS depends on production scheduling and the time to reconfigure. According to the theory of constrains, bottleneck is the main factor to hinder the development of a manufacturing system. So the schedule and the adjustment of production capacity for bottleneck are really important in improving a manufacturing system performance. This paper focuses on the scheduling of bottleneck which can adjust production capacity and develops a model to solve this type problem. An adaptive genetic algorithm is used to solve the model. The aim of the problem is to find out the best schedule and device production capacity. Finally, an example is used to validate the results of the model and its solution procedure.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"49 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116876993","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603613
Ershen Wang, Tao Pang, Zhixian Zhang
Reliability of a navigation system is one of greatimportance for navigation purposes. Therefore, anintegrity monitoring system is an inseparable part of aviation navigation system. Failures or faults due to malfunctions in the systems should be detected and repaired to keep the integrity of the system intact. In this paper, we present a method based on wavelet analysis for detecting failures. The raw pseudorange measurements are transformed by wavelet transform. Then the data jumping can be detected through the different wavelet scales. Therefore, the satellite fault could be detected. Two kinds of GPS satellite fault detection methods are given in detail, and the advantages and disadvantages of them are compared. Based on the wavelet analysis, the performance of fault detection is evaluated using the real measured data. The effectiveness of the proposed approach is illustrated in a problem of GPS (Global Positioning System) autonomous integrity monitoring system.
{"title":"Wavelet analysis approach to fault detection for GPS integrity monitoring","authors":"Ershen Wang, Tao Pang, Zhixian Zhang","doi":"10.1109/ICIEA.2016.7603613","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603613","url":null,"abstract":"Reliability of a navigation system is one of greatimportance for navigation purposes. Therefore, anintegrity monitoring system is an inseparable part of aviation navigation system. Failures or faults due to malfunctions in the systems should be detected and repaired to keep the integrity of the system intact. In this paper, we present a method based on wavelet analysis for detecting failures. The raw pseudorange measurements are transformed by wavelet transform. Then the data jumping can be detected through the different wavelet scales. Therefore, the satellite fault could be detected. Two kinds of GPS satellite fault detection methods are given in detail, and the advantages and disadvantages of them are compared. Based on the wavelet analysis, the performance of fault detection is evaluated using the real measured data. The effectiveness of the proposed approach is illustrated in a problem of GPS (Global Positioning System) autonomous integrity monitoring system.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"51 19","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120819888","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603851
Liang Dong, Jin-hua Chen, Chi Zhang, D. Wu, Guangwei Yu, Qiang Liu
This paper introduces three-type voice coil motors (VCMs) for nano-positioning system. These VCMs all consists dual-magnet stator and coil mover which is sandwiched between these two-layer magnets with different topology structures of the stators and movers. The motor structures, magnetic field distribution, thrust force and force ripple of these VCMs are studied and compared. Equivalent magnetic circuit method and the finite element analysis (FEA) are employed to analyze the performance of these VCMs. The results show that the VCM with Halbach array permanent magnets and three-segment coil mover has the largest force constant and smallest force ripple. A prototype of the Halbach VCM is manufactured and tested. The experimental results accord well with which of the simulation.
{"title":"Design and comparison of three-type VCMs for nano-positioning system","authors":"Liang Dong, Jin-hua Chen, Chi Zhang, D. Wu, Guangwei Yu, Qiang Liu","doi":"10.1109/ICIEA.2016.7603851","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603851","url":null,"abstract":"This paper introduces three-type voice coil motors (VCMs) for nano-positioning system. These VCMs all consists dual-magnet stator and coil mover which is sandwiched between these two-layer magnets with different topology structures of the stators and movers. The motor structures, magnetic field distribution, thrust force and force ripple of these VCMs are studied and compared. Equivalent magnetic circuit method and the finite element analysis (FEA) are employed to analyze the performance of these VCMs. The results show that the VCM with Halbach array permanent magnets and three-segment coil mover has the largest force constant and smallest force ripple. A prototype of the Halbach VCM is manufactured and tested. The experimental results accord well with which of the simulation.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126867748","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603637
M. Alam, Haozhang Li, M. Chowdhury
In this research, we propose a secure multi-modal biometric authentication that will have cancellable property. Cloud servers need to have the confidential information mobile and ready in case of cancellation so that the same user can authenticate or identify using the same authentication process when joining to other clouds. However, a cloud server needs to be careful transferring biometric data to other cloud during busy time, since biometric data is sensitive to bit error rate that may adversely affect the false acceptance or rejection rate. As such another key contribution of this paper is to provide a decision making model for biometric/confidential data transfer among clouds in busy time in order to avoid network congestion. The work presented in this research is also a good fit during migration of today's internet into MobilityFirst architecture while biometric information in a locality is being shared by cloud servers and service is being provided at the same time.
{"title":"Cancellable multi-modal biometrie authentication for cloud based mobilityfirst like environment","authors":"M. Alam, Haozhang Li, M. Chowdhury","doi":"10.1109/ICIEA.2016.7603637","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603637","url":null,"abstract":"In this research, we propose a secure multi-modal biometric authentication that will have cancellable property. Cloud servers need to have the confidential information mobile and ready in case of cancellation so that the same user can authenticate or identify using the same authentication process when joining to other clouds. However, a cloud server needs to be careful transferring biometric data to other cloud during busy time, since biometric data is sensitive to bit error rate that may adversely affect the false acceptance or rejection rate. As such another key contribution of this paper is to provide a decision making model for biometric/confidential data transfer among clouds in busy time in order to avoid network congestion. The work presented in this research is also a good fit during migration of today's internet into MobilityFirst architecture while biometric information in a locality is being shared by cloud servers and service is being provided at the same time.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115989431","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603992
Rong Zhang, Guangzhao Luo, Wencong Tu, Zhe Chen, R. Kennel
In this paper, to further improve the performance of dynamic and anti-interference of the permanent magnet synchronous motor (PMSM) control system, the grey control strategy of predictive current for PMSM is proposed by analyzing the characteristics of the actual current response in control system and making full use of historical current data to adjust the current value quickly to follow the change of the given value. The off-line simulation is carried out in condition of rated load and sudden load. Compared with the classical vector control and traditional predictive current control, the proposed algorithm reaches the given speed rapidly and has the performance of good response and small overshoot. It also has the better dynamic and anti-interference performance. To further verify the effectiveness of the proposed control strategy, the real-time simulation of the proposed algorithm is carried out by dSPACE system.
{"title":"Grey control strategy of predictive current for PMSM","authors":"Rong Zhang, Guangzhao Luo, Wencong Tu, Zhe Chen, R. Kennel","doi":"10.1109/ICIEA.2016.7603992","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603992","url":null,"abstract":"In this paper, to further improve the performance of dynamic and anti-interference of the permanent magnet synchronous motor (PMSM) control system, the grey control strategy of predictive current for PMSM is proposed by analyzing the characteristics of the actual current response in control system and making full use of historical current data to adjust the current value quickly to follow the change of the given value. The off-line simulation is carried out in condition of rated load and sudden load. Compared with the classical vector control and traditional predictive current control, the proposed algorithm reaches the given speed rapidly and has the performance of good response and small overshoot. It also has the better dynamic and anti-interference performance. To further verify the effectiveness of the proposed control strategy, the real-time simulation of the proposed algorithm is carried out by dSPACE system.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"66 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122868681","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-06-05DOI: 10.1109/ICIEA.2016.7603913
Yue Long, Jin Xiao, Tianyao Zhang, Hao Cheng
The wind pendulum is a highly nonlinear hysteretic system, the research of which is rarely mentioned. In this paper, the mathematical model of a wind pendulum was developed by using Euler-Lagrange equation. In any direction on a sphere, the mechanical characters of swing control and anti-swing control were modeled and analyzed. Then a simple method was proposed to achieve specific swinging or anti-swinging with external force of wind. The effectiveness of swing and anti-swing control model with PID controller with integral separation is shown via simulation and experiment results, which verifies the two-dimension model of wind pendulum system.
{"title":"Modeling and control for swing and anti-swing of a wind pendulum","authors":"Yue Long, Jin Xiao, Tianyao Zhang, Hao Cheng","doi":"10.1109/ICIEA.2016.7603913","DOIUrl":"https://doi.org/10.1109/ICIEA.2016.7603913","url":null,"abstract":"The wind pendulum is a highly nonlinear hysteretic system, the research of which is rarely mentioned. In this paper, the mathematical model of a wind pendulum was developed by using Euler-Lagrange equation. In any direction on a sphere, the mechanical characters of swing control and anti-swing control were modeled and analyzed. Then a simple method was proposed to achieve specific swinging or anti-swinging with external force of wind. The effectiveness of swing and anti-swing control model with PID controller with integral separation is shown via simulation and experiment results, which verifies the two-dimension model of wind pendulum system.","PeriodicalId":283114,"journal":{"name":"2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA)","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122970148","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：