Vesela Tabakova, Christina Klug, Thomas H. Schmitz
The dynamic state of the viscous clay in Liquid Deposition Modeling (LDM) often leads to discrepancies between the digital model and the resulting physical object. This emergent behavior can be harnessed to produce complex physical structures that would not be possible with other methods. This study takes advantage of the viscous state and tensile strength of the extruded clay strand to explore the impact of dynamic extrusion and deformations through travel paths in LDM to manufacture complex porous physical structures. The effects of these parameters are discussed in two case studies: (1) regular and semi-random Spot Deposition surfaces with either open or thickened regions, and (2) porous 3D lattice structures created through the controlled bending of vertical extrusions. The achieved higher geometrical complexity of objects through the algorithmically programmed alternations in the sequence and rate of material deposition allows for a wide range of buildup approaches that expand the production spectrum of sustainable small- and large-scale elements.
{"title":"Dynamic Extrusion Control in Spot Deposition Modeling for Porous 3D Clay Structures","authors":"Vesela Tabakova, Christina Klug, Thomas H. Schmitz","doi":"10.3390/ceramics6040124","DOIUrl":"https://doi.org/10.3390/ceramics6040124","url":null,"abstract":"The dynamic state of the viscous clay in Liquid Deposition Modeling (LDM) often leads to discrepancies between the digital model and the resulting physical object. This emergent behavior can be harnessed to produce complex physical structures that would not be possible with other methods. This study takes advantage of the viscous state and tensile strength of the extruded clay strand to explore the impact of dynamic extrusion and deformations through travel paths in LDM to manufacture complex porous physical structures. The effects of these parameters are discussed in two case studies: (1) regular and semi-random Spot Deposition surfaces with either open or thickened regions, and (2) porous 3D lattice structures created through the controlled bending of vertical extrusions. The achieved higher geometrical complexity of objects through the algorithmically programmed alternations in the sequence and rate of material deposition allows for a wide range of buildup approaches that expand the production spectrum of sustainable small- and large-scale elements.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135351971","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The incorporation of ductile reinforcements into ceramics helps restrain crack deflection, which can enhance ceramics’ toughness and overcome the matrix’s brittleness. In this paper, we produced a ceramic composite reinforced by carbon fibers coated by multi-wall carbon nanotubes (shortened by Cf-MWCNT/SiC composites) for enhanced impact resistance at a high strain rate that commonly occurs in composite materials used in astronautics, marine, and other engineering fields. The fabrication process involves growing multi-wall carbon nanotubes (MWCNTs) on a carbon fiber woven fabric (Cf) to create the fibril/fabric hybrid reinforcement. It is then impregnated by polymer solution (precursor of the ceramics), forming composites after the pyrolysis process, known as the liquid polymer infiltration and pyrolysis (PIP) technique. To assess the impact resistance of the Cf-MWCNT/SiC under high-strain rate compressions, the split Hopkinson pressure bar (SHPB) technique is employed. Since the failure behavior of the Cf-MWCNT/SiC composites in the absence of the ductile phase is not well understood, the study employs the Hilbert–Huang transform (HHT) to analyze the stress–time curves obtained from the SHPB experiments. By applying the HHT, we obtained the frequency–time spectrum and the marginal Hilbert spectrum of the stress signals. These analyses reveal the frequency characteristics of the Cf-MWCNT/SiC composite and provide insights into the relationship between transformed signal frequency and fracture behavior. By understanding the dynamic fracture behavior and frequency response of the Cf-MWCNT/SiC, it becomes possible to enhance its impact resistance and tailor its performance for specific protective requirements. Therefore, the findings of this study can guide the future design and optimization of Cf-MWCNT/SiC structures for various protective applications, such as body armor, civil structures, and protections for vehicles and aircraft.
{"title":"Frequency Characteristics of High Strain Rate Compressions of Cf-MWCNTs/SiC Composites","authors":"Kun Luan, Chen Ming, Xiaomeng Fang, Jianjun Liu","doi":"10.3390/ceramics6040122","DOIUrl":"https://doi.org/10.3390/ceramics6040122","url":null,"abstract":"The incorporation of ductile reinforcements into ceramics helps restrain crack deflection, which can enhance ceramics’ toughness and overcome the matrix’s brittleness. In this paper, we produced a ceramic composite reinforced by carbon fibers coated by multi-wall carbon nanotubes (shortened by Cf-MWCNT/SiC composites) for enhanced impact resistance at a high strain rate that commonly occurs in composite materials used in astronautics, marine, and other engineering fields. The fabrication process involves growing multi-wall carbon nanotubes (MWCNTs) on a carbon fiber woven fabric (Cf) to create the fibril/fabric hybrid reinforcement. It is then impregnated by polymer solution (precursor of the ceramics), forming composites after the pyrolysis process, known as the liquid polymer infiltration and pyrolysis (PIP) technique. To assess the impact resistance of the Cf-MWCNT/SiC under high-strain rate compressions, the split Hopkinson pressure bar (SHPB) technique is employed. Since the failure behavior of the Cf-MWCNT/SiC composites in the absence of the ductile phase is not well understood, the study employs the Hilbert–Huang transform (HHT) to analyze the stress–time curves obtained from the SHPB experiments. By applying the HHT, we obtained the frequency–time spectrum and the marginal Hilbert spectrum of the stress signals. These analyses reveal the frequency characteristics of the Cf-MWCNT/SiC composite and provide insights into the relationship between transformed signal frequency and fracture behavior. By understanding the dynamic fracture behavior and frequency response of the Cf-MWCNT/SiC, it becomes possible to enhance its impact resistance and tailor its performance for specific protective requirements. Therefore, the findings of this study can guide the future design and optimization of Cf-MWCNT/SiC structures for various protective applications, such as body armor, civil structures, and protections for vehicles and aircraft.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":"76 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135435017","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Glazed tiles are characteristic architectural ceramics traditionally used in ancient Chinese royal buildings. Studies on their chemical compositions have provided valuable information regarding their compositional classifications and the provenances of their raw materials. Existing studies have mainly focused on the Yuan dynasty (1271–1368 AD) or later. Research on earlier ages is limited because of a lack of samples. In this study, we used an energy-dispersive X-ray fluorescence spectrometer to analyze the chemical compositions of 18 glazed tiles unearthed from an imperial mausoleum (the Xinli site) from the Liao dynasty (969–982 AD). The glazes of the tiles had a SiO2–Al2O3–PbO ternary oxidic system and the bodies of the tiles had a SiO2–Al2O3 binary oxidic system. Certain compositional differences were observed among the samples with different types of decorations. Compared with samples from the Yuan dynasty and later periods, the Xinli samples had higher SiO2 and Al2O3 contents and lower PbO and CuO contents in the tile glazes. The tile bodies of the Xinli samples had compositions similar to those of tile bodies from the Qing dynasty (1616–1912 AD). We speculated that the Xinli samples with different decorations came from different kiln sites.
{"title":"Chemical Compositions of Chinese Glazed Tiles from an Imperial Mausoleum of the Liao Dynasty","authors":"Lan Zhao, Xiongfei Wan, Baoqiang Kang, He Li","doi":"10.3390/ceramics6040123","DOIUrl":"https://doi.org/10.3390/ceramics6040123","url":null,"abstract":"Glazed tiles are characteristic architectural ceramics traditionally used in ancient Chinese royal buildings. Studies on their chemical compositions have provided valuable information regarding their compositional classifications and the provenances of their raw materials. Existing studies have mainly focused on the Yuan dynasty (1271–1368 AD) or later. Research on earlier ages is limited because of a lack of samples. In this study, we used an energy-dispersive X-ray fluorescence spectrometer to analyze the chemical compositions of 18 glazed tiles unearthed from an imperial mausoleum (the Xinli site) from the Liao dynasty (969–982 AD). The glazes of the tiles had a SiO2–Al2O3–PbO ternary oxidic system and the bodies of the tiles had a SiO2–Al2O3 binary oxidic system. Certain compositional differences were observed among the samples with different types of decorations. Compared with samples from the Yuan dynasty and later periods, the Xinli samples had higher SiO2 and Al2O3 contents and lower PbO and CuO contents in the tile glazes. The tile bodies of the Xinli samples had compositions similar to those of tile bodies from the Qing dynasty (1616–1912 AD). We speculated that the Xinli samples with different decorations came from different kiln sites.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":"74 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135480892","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. M. Hassan, Hamada Elsayed, M. Awaad, A. M. Saleh, S. M. Naga
Zirconia-toughened alumina (ZTA)/Al2TiO5 composites were prepared via a sol–gel route. The prepared samples were uniaxially pressed and pressurelessly sintered at 1650–1700 °C for 1 h. The microstructure, densification, and X-ray diffraction patterns of the sintered ZTA/Al2TiO5 composites were investigated, and their mechanical properties, thermal coefficient, and shock resistance were characterized. The addition of Al2TiO5 hindered the grain growth of the alumina particles and enhanced the relative density, Vickers hardness, and bending strength of the composites compared with pure ZTA samples. The fracture toughness was improved by 19% upon the addition of 40 wt% Al2TiO5. Moreover, increasing the Al2TiO5 content resulted in an improvement in the thermal shock resistance.
{"title":"Microstructure, Mechanical and Thermal Properties of ZTA/Al2TiO5 Ceramic Composites","authors":"A. M. Hassan, Hamada Elsayed, M. Awaad, A. M. Saleh, S. M. Naga","doi":"10.3390/ceramics6040121","DOIUrl":"https://doi.org/10.3390/ceramics6040121","url":null,"abstract":"Zirconia-toughened alumina (ZTA)/Al2TiO5 composites were prepared via a sol–gel route. The prepared samples were uniaxially pressed and pressurelessly sintered at 1650–1700 °C for 1 h. The microstructure, densification, and X-ray diffraction patterns of the sintered ZTA/Al2TiO5 composites were investigated, and their mechanical properties, thermal coefficient, and shock resistance were characterized. The addition of Al2TiO5 hindered the grain growth of the alumina particles and enhanced the relative density, Vickers hardness, and bending strength of the composites compared with pure ZTA samples. The fracture toughness was improved by 19% upon the addition of 40 wt% Al2TiO5. Moreover, increasing the Al2TiO5 content resulted in an improvement in the thermal shock resistance.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":"98 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135591234","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Dipesh Neupane, Noah Kramer, Romakanta Bhattarai, Christopher Hanley, Arjun K. Pathak, Xiao Shen, Sunil Karna, Sanjay R. Mishra
The study reports the influence of rare-earth ion doping on the structural, magnetic, and magnetocaloric properties of ferrimagnetic Gd3−xRExFe5O12 (RE = Y, Nd, Sm, and Dy, x = 0.0, 0.25, 0.50, and 0.75) garnet compound prepared via facile autocombustion method followed by annealing in air. X-Ray diffraction (XRD) data analysis confirmed the presence of a single-phase garnet. The compound’s lattice parameters and cell volume varied according to differences in ionic radii of the doped rare-earth ions. The RE3+ substitution changed the site-to-site bond lengths and bond angles, affecting the magnetic interaction between site ions. Magnetization measurements for all RE3+-doped samples demonstrated paramagnetic behavior at room temperature and soft-ferrimagnetic behavior at 5 K. The isothermal magnetic entropy changes (−ΔSM) were derived from the magnetic isotherm curves, M vs. T, in a field up to 3 T in the Gd3−xRExFe5O12 sample. The maximum magnetic entropy change (−∆SMmax) increased with Dy3+ and Sm3+substitution and decreased for Nd3+ and Y3+ substitution with x content. The Dy3+-doped Gd2.25Dy0.75Fe5O12 sample showed −∆SMmax~2.03 Jkg−1K−1, which is ~7% higher than that of Gd3Fe5O12 (1.91 Jkg−1K−1). A first-principal density function theory (DFT) technique was used to shed light on observed properties. The study shows that the magnetic moments of the doped rare-earths ions play a vital role in tuning the magnetocaloric properties of the garnet compound.
本研究报道了稀土离子掺杂对铁磁性Gd3−xrexfe50o12 (RE = Y, Nd, Sm, and Dy, x = 0.0, 0.25, 0.50, 0.75)石榴石化合物的结构、磁性和磁热学性能的影响。x射线衍射(XRD)数据分析证实了单相石榴石的存在。化合物的晶格参数和胞体体积随掺杂稀土离子的离子半径的不同而变化。RE3+取代改变了位点间的键长和键角，影响了位点离子间的磁相互作用。所有掺RE3+样品的磁化测量结果显示室温下的顺磁性和5k下的软铁磁性。等温磁熵变化(−ΔSM)由Gd3−xRExFe5O12样品在高达3t的磁场下的磁等温曲线M vs. T得到。最大磁熵变化(−∆SMmax)随Dy3+和Sm3+取代量的增加而增大，随Nd3+和Y3+取代量的增加而减小。Dy3+掺杂的Gd2.25Dy0.75Fe5O12样品显示出−∆SMmax~2.03 Jkg−1K−1，比Gd3Fe5O12 (1.91 Jkg−1K−1)提高了~7%。一主密度函数理论(DFT)技术被用来阐明观察到的性质。研究表明，稀土离子的磁矩对石榴石化合物的磁热学性质起着至关重要的调节作用。
{"title":"Rare-Earth Doped Gd3−xRExFe5O12 (RE = Y, Nd, Sm, and Dy) Garnet: Structural, Magnetic, Magnetocaloric, and DFT Study","authors":"Dipesh Neupane, Noah Kramer, Romakanta Bhattarai, Christopher Hanley, Arjun K. Pathak, Xiao Shen, Sunil Karna, Sanjay R. Mishra","doi":"10.3390/ceramics6040120","DOIUrl":"https://doi.org/10.3390/ceramics6040120","url":null,"abstract":"The study reports the influence of rare-earth ion doping on the structural, magnetic, and magnetocaloric properties of ferrimagnetic Gd3−xRExFe5O12 (RE = Y, Nd, Sm, and Dy, x = 0.0, 0.25, 0.50, and 0.75) garnet compound prepared via facile autocombustion method followed by annealing in air. X-Ray diffraction (XRD) data analysis confirmed the presence of a single-phase garnet. The compound’s lattice parameters and cell volume varied according to differences in ionic radii of the doped rare-earth ions. The RE3+ substitution changed the site-to-site bond lengths and bond angles, affecting the magnetic interaction between site ions. Magnetization measurements for all RE3+-doped samples demonstrated paramagnetic behavior at room temperature and soft-ferrimagnetic behavior at 5 K. The isothermal magnetic entropy changes (−ΔSM) were derived from the magnetic isotherm curves, M vs. T, in a field up to 3 T in the Gd3−xRExFe5O12 sample. The maximum magnetic entropy change (−∆SMmax) increased with Dy3+ and Sm3+substitution and decreased for Nd3+ and Y3+ substitution with x content. The Dy3+-doped Gd2.25Dy0.75Fe5O12 sample showed −∆SMmax~2.03 Jkg−1K−1, which is ~7% higher than that of Gd3Fe5O12 (1.91 Jkg−1K−1). A first-principal density function theory (DFT) technique was used to shed light on observed properties. The study shows that the magnetic moments of the doped rare-earths ions play a vital role in tuning the magnetocaloric properties of the garnet compound.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136096681","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The manufacturing of copper oxide (CuO) nanoparticles has been accomplished utilizing a green technique that relies on biologically reliable mechanisms. Aqueous solutions of copper nitrate and Ixora Coccinea leaf extract are used in an environmentally safe process for creating CuO nanoparticles. The characterization of the synthesized CuO nanoparticles involves the utilization of techniques such as X-ray diffractometry (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetricanalysis (TGA). CuO nanoparticles are confirmed by XRD and FTIR peak results. When the particles are measured, they range between 93.75 nm and 98.16 nm, respectively. The produced CuO nanoparticles are used to prepare the nanofluid. While conventional water exhibits a 3 °C temperature difference, nanofluid achieves a considerable temperature differenceof 7 °C. As a result, it is clear that the nanofluid performs better at dispersing heat into the environment. The experiment’s overall findings support the possibility of ecologically friendly, green-synthesized CuO nanoparticle-induced nanofluid as an effective heattransfer fluid that can be applied to heattransfer systems.
{"title":"Characterization and Heat Transfer Assessment of CuO-Based Nanofluid Prepared through a Green Synthesis Process","authors":"Suresh Kumar Shanmugam, Ajithram Arivendan, Samy Govindan Selvamani, Thangaraju Dheivasigamani, Thirumalai Kumaran Sundaresan, Saood Ali","doi":"10.3390/ceramics6040119","DOIUrl":"https://doi.org/10.3390/ceramics6040119","url":null,"abstract":"The manufacturing of copper oxide (CuO) nanoparticles has been accomplished utilizing a green technique that relies on biologically reliable mechanisms. Aqueous solutions of copper nitrate and Ixora Coccinea leaf extract are used in an environmentally safe process for creating CuO nanoparticles. The characterization of the synthesized CuO nanoparticles involves the utilization of techniques such as X-ray diffractometry (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetricanalysis (TGA). CuO nanoparticles are confirmed by XRD and FTIR peak results. When the particles are measured, they range between 93.75 nm and 98.16 nm, respectively. The produced CuO nanoparticles are used to prepare the nanofluid. While conventional water exhibits a 3 °C temperature difference, nanofluid achieves a considerable temperature differenceof 7 °C. As a result, it is clear that the nanofluid performs better at dispersing heat into the environment. The experiment’s overall findings support the possibility of ecologically friendly, green-synthesized CuO nanoparticle-induced nanofluid as an effective heattransfer fluid that can be applied to heattransfer systems.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136098856","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pavel Ctibor, Libor Straka, Josef Sedláček, František Lukáč
High-pressure forming at 300 MPa and room temperature was applied before the sintering of a lithium fluoride (LiF) powder. The as-fired samples were tested as dielectrics and showed very interesting characteristics. The best sample, sintered at 750 °C for 8 h, had a relative permittivity of 12.1 and a loss tangent of 0.0006, both of them frequency-independent and temperature-independent up to at least 150 °C, and moreover, the volume DC resistivity was 27.4 × 1012 Ωm at room temperature. These parameters are comparable with oxide ceramics, processed at temperatures over 1300 °C, as for example, aluminum dioxide (Al2O3) or Y3Al5O12 (YAG). LiF material is advantageous because of its very low sintering temperature, which is only about one-half of typical oxide ceramic dielectrics.
{"title":"Dielectric Properties of Compacts Sintered after High-Pressure Forming of Lithium Fluoride","authors":"Pavel Ctibor, Libor Straka, Josef Sedláček, František Lukáč","doi":"10.3390/ceramics6040118","DOIUrl":"https://doi.org/10.3390/ceramics6040118","url":null,"abstract":"High-pressure forming at 300 MPa and room temperature was applied before the sintering of a lithium fluoride (LiF) powder. The as-fired samples were tested as dielectrics and showed very interesting characteristics. The best sample, sintered at 750 °C for 8 h, had a relative permittivity of 12.1 and a loss tangent of 0.0006, both of them frequency-independent and temperature-independent up to at least 150 °C, and moreover, the volume DC resistivity was 27.4 × 1012 Ωm at room temperature. These parameters are comparable with oxide ceramics, processed at temperatures over 1300 °C, as for example, aluminum dioxide (Al2O3) or Y3Al5O12 (YAG). LiF material is advantageous because of its very low sintering temperature, which is only about one-half of typical oxide ceramic dielectrics.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136060801","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mikhail V. Korzhik, Petr V. Karpyuk, Aliaksei G. Bondarau, Daria E. Lelecova, Vitaly A. Mechinsky, Vladimir Pustovarov, Vasilii Retivov, Valentina G. Smyslova, Dmitry Tavrunov, Denis N. Yanushevich
Compositionally disordered crystalline material (Gd,Y,Tb,Ce)3Al2Ga3O12 was demonstrated to be a highly effective converter of corpuscular ionizing radiation into light. The material was found to be radiation-tolerant to an intense 10 MeV electron beam and had a low temperature dependence on light yield. These findings open an opportunity to utilize the developed material to create long-living, high-flux sources of optical photons under the irradiation of isotope sources. Besides the purposes of the measurement of ionizing radiation by the scintillation method in a harsh irradiation environment, this puts forward the exploiting of the developed material for indirect isotope voltaic batteries and the consideration of a photon engine for travel beyond the solar system, where solar wind force becomes negligible.
{"title":"Compositionally Disordered Ceramic (Gd,Y,Tb,Ce)3Al2Ga3O12 Phosphor for an Effective Conversion of Isotopes’ Ionizing Radiation to Light","authors":"Mikhail V. Korzhik, Petr V. Karpyuk, Aliaksei G. Bondarau, Daria E. Lelecova, Vitaly A. Mechinsky, Vladimir Pustovarov, Vasilii Retivov, Valentina G. Smyslova, Dmitry Tavrunov, Denis N. Yanushevich","doi":"10.3390/ceramics6030117","DOIUrl":"https://doi.org/10.3390/ceramics6030117","url":null,"abstract":"Compositionally disordered crystalline material (Gd,Y,Tb,Ce)3Al2Ga3O12 was demonstrated to be a highly effective converter of corpuscular ionizing radiation into light. The material was found to be radiation-tolerant to an intense 10 MeV electron beam and had a low temperature dependence on light yield. These findings open an opportunity to utilize the developed material to create long-living, high-flux sources of optical photons under the irradiation of isotope sources. Besides the purposes of the measurement of ionizing radiation by the scintillation method in a harsh irradiation environment, this puts forward the exploiting of the developed material for indirect isotope voltaic batteries and the consideration of a photon engine for travel beyond the solar system, where solar wind force becomes negligible.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":"53 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136236422","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Electroluminescence of metal halide perovskites has been widely reported via the fabrication and optimization of light-emitting diodes and light-emitting transistors. Light-emitting transistors are particularly interesting owing to the additional control of the gate voltage on the electroluminescence. In this work, the design of a microcavity, with a defect mode that can be tuned with an applied voltage, integrated with a metal halide light-emitting transistor is shown. The optical properties of the device have been simulated with the transfer matrix method, considering the wavelength-dependent refractive indexes of all the employed materials. The tunability of the microcavity has been obtained via the employment of doped semiconductor nanocrystalline films, which show a tunable plasma frequency and, thus, a tunable refractive index as a function of the applied voltage. Consequently, the tunability of the electroluminescence of the metal halide perovskite light-emitting transistor has been demonstrated.
{"title":"Metal Halide Perovskite Light-Emitting Transistor with Tunable Emission Based on Electrically Doped Semiconductor Nanocrystal-Based Microcavities","authors":"Francesco Scotognella","doi":"10.3390/ceramics6030116","DOIUrl":"https://doi.org/10.3390/ceramics6030116","url":null,"abstract":"Electroluminescence of metal halide perovskites has been widely reported via the fabrication and optimization of light-emitting diodes and light-emitting transistors. Light-emitting transistors are particularly interesting owing to the additional control of the gate voltage on the electroluminescence. In this work, the design of a microcavity, with a defect mode that can be tuned with an applied voltage, integrated with a metal halide light-emitting transistor is shown. The optical properties of the device have been simulated with the transfer matrix method, considering the wavelength-dependent refractive indexes of all the employed materials. The tunability of the microcavity has been obtained via the employment of doped semiconductor nanocrystalline films, which show a tunable plasma frequency and, thus, a tunable refractive index as a function of the applied voltage. Consequently, the tunability of the electroluminescence of the metal halide perovskite light-emitting transistor has been demonstrated.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135979270","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
I. Shatskyi, M. Makoviichuk, L. Ropyak, A. Velychkovych
In this article, an analytical approach to the study of the behavior of functionally graded FG coatings under local load is developed. The method is suitable for coatings with a specific structure. We consider that the coating can be conditionally divided into two zones: a relatively rigid outer and a relatively compliant inner. The outer layer is modeled by a non-homogeneous plate that bends. We submit the inner substrate to the hypothesis of a non-homogeneous thin Winkler layer. The solution of the formulated boundary value problem is constructed in analytical form. Simulation examples for FG aluminum oxide coatings grown from aluminum sprayed on steel and from compact alloy D16T are considered. The distributions of equivalent stresses, safety factors and normalized equivalent stresses in the coatings are studied. It is noted that in a heterogeneous material, the location of the minimum of the safety factor does not always coincide with the location of the maximum of the equivalent stress.
{"title":"Analytical Model of Deformation of a Functionally Graded Ceramic Coating under Local Load","authors":"I. Shatskyi, M. Makoviichuk, L. Ropyak, A. Velychkovych","doi":"10.3390/ceramics6030115","DOIUrl":"https://doi.org/10.3390/ceramics6030115","url":null,"abstract":"In this article, an analytical approach to the study of the behavior of functionally graded FG coatings under local load is developed. The method is suitable for coatings with a specific structure. We consider that the coating can be conditionally divided into two zones: a relatively rigid outer and a relatively compliant inner. The outer layer is modeled by a non-homogeneous plate that bends. We submit the inner substrate to the hypothesis of a non-homogeneous thin Winkler layer. The solution of the formulated boundary value problem is constructed in analytical form. Simulation examples for FG aluminum oxide coatings grown from aluminum sprayed on steel and from compact alloy D16T are considered. The distributions of equivalent stresses, safety factors and normalized equivalent stresses in the coatings are studied. It is noted that in a heterogeneous material, the location of the minimum of the safety factor does not always coincide with the location of the maximum of the equivalent stress.","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":" ","pages":""},"PeriodicalIF":2.8,"publicationDate":"2023-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49267045","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：