Aiming at the arid climate and backward crop storage and preservation technology in southern Xinjiang, an intelligent storage management system for crops in southern Xinjiang based on industrial Internet of Things is designed to realize the intelligent storage management of crops in southern Xinjiang and improve its storage and preservation efficiency. The system takes the lower computer PLC as the control core, collects real-time data on the environmental factors affecting crop storage, and the collected information is processed by PLC and transmitted to the touch screen and cloud platform through Ethernet and mobile Internet for centralized supervision. The system gives full play to the advantages of the IoT cloud platform and realizes real-time remote control of crop storage and management by managers through mobile APP, which is convenient, stable and reliable, and intuitive.
{"title":"Design of Intelligent Storage Management System for Crops in Southern Xinjiang Based on Industrial Internet of Things","authors":"Zhang Bin, Lin Xiaodan, Jiao Renlei","doi":"10.22158/asir.v7n1p106","DOIUrl":"https://doi.org/10.22158/asir.v7n1p106","url":null,"abstract":"Aiming at the arid climate and backward crop storage and preservation technology in southern Xinjiang, an intelligent storage management system for crops in southern Xinjiang based on industrial Internet of Things is designed to realize the intelligent storage management of crops in southern Xinjiang and improve its storage and preservation efficiency. The system takes the lower computer PLC as the control core, collects real-time data on the environmental factors affecting crop storage, and the collected information is processed by PLC and transmitted to the touch screen and cloud platform through Ethernet and mobile Internet for centralized supervision. The system gives full play to the advantages of the IoT cloud platform and realizes real-time remote control of crop storage and management by managers through mobile APP, which is convenient, stable and reliable, and intuitive.","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129358318","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This design is based on Etap simulation software to complete the following steps: analysis of original data, determination of power grid voltage level and preliminary selection of power grid connection scheme, technical and economic operation of optimal scheme, operation characteristics and material statistical calculation. Through this design, I have mastered the general principles and common methods of power network planning and design. I am skilled in using Etap simulation software to cultivate my analytical ability in various aspects of technology and economy, improve my ability of calculation, data analysis and arrangement, and design specification compilation.
{"title":"Local Grid Planning and Design","authors":"Lifan Yang","doi":"10.22158/asir.v7n1p92","DOIUrl":"https://doi.org/10.22158/asir.v7n1p92","url":null,"abstract":"This design is based on Etap simulation software to complete the following steps: analysis of original data, determination of power grid voltage level and preliminary selection of power grid connection scheme, technical and economic operation of optimal scheme, operation characteristics and material statistical calculation. Through this design, I have mastered the general principles and common methods of power network planning and design. I am skilled in using Etap simulation software to cultivate my analytical ability in various aspects of technology and economy, improve my ability of calculation, data analysis and arrangement, and design specification compilation.","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124305600","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In this article, we propose a linear integer model for the optimal location of a hub for air traffic in the WAEMU zone. A hub represents for an airline a base where an essential part of its activities is concentrated. Its location must therefore be judiciously determined. The hub location problem is one of the new and promising areas of research in the field of location theory. In order to satisfy a demand, the location of the hub involves the movement of people, goods between origin destination pairs required. Hubs are applied to reduce the number of transport links between the origin and destination airports. The proposed model minimizes the distances and takes into account the flow of passengers registered in the different airports and minimizes the total cost of the transfer via the hub airport. The simulations were made with the programming language Python.
{"title":"Modeling and Solving a Linear Integer Problem (PLNE) for the Optimal Localization of a Hub Air Transport in the WAEMU Zone","authors":"Abdoulaye Ali Ibrahima, S. Bisso, S. Diagne","doi":"10.22158/asir.v7n1p82","DOIUrl":"https://doi.org/10.22158/asir.v7n1p82","url":null,"abstract":"In this article, we propose a linear integer model for the optimal location of a hub for air traffic in the WAEMU zone. A hub represents for an airline a base where an essential part of its activities is concentrated. Its location must therefore be judiciously determined. The hub location problem is one of the new and promising areas of research in the field of location theory. In order to satisfy a demand, the location of the hub involves the movement of people, goods between origin destination pairs required. Hubs are applied to reduce the number of transport links between the origin and destination airports. The proposed model minimizes the distances and takes into account the flow of passengers registered in the different airports and minimizes the total cost of the transfer via the hub airport. The simulations were made with the programming language Python.","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"408 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122803808","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Robotics is a programmable mechanical system with a certain autonomy that can exercise in its environment and complete some prescribed tasks. Although industrial robots are robots, they mainly provide duplicate, large quantities, and standard services. Therefore, they also have a certain standardized requirements for the materials and semi -finished products. In addition, because industrial robots are not intelligent enough, the processing of fuzzy range can only be operated according to procedures. For example, when the screen has a small bump, the robot may judge that it cannot be operated, but if it is artificially determined, it can continue to be processed and sold. Even if the development of machine vision can solve these problems to a certain extent, non -standardized operations will reduce efficiency accordingly. Industrial robots can not only achieve simple processes such as handling, but also technically some complex processes can be achieved. However, for the consideration of cost and benefits, most industrial robot manufacturers will not choose to produce such products. Because such demand is not large enough, and the profit margin is not considerable enough.
{"title":"Application Market of Industrial Robot in China","authors":"Liu Tao","doi":"10.22158/asir.v7n1p77","DOIUrl":"https://doi.org/10.22158/asir.v7n1p77","url":null,"abstract":"Robotics is a programmable mechanical system with a certain autonomy that can exercise in its environment and complete some prescribed tasks. Although industrial robots are robots, they mainly provide duplicate, large quantities, and standard services. Therefore, they also have a certain standardized requirements for the materials and semi -finished products. In addition, because industrial robots are not intelligent enough, the processing of fuzzy range can only be operated according to procedures. For example, when the screen has a small bump, the robot may judge that it cannot be operated, but if it is artificially determined, it can continue to be processed and sold. Even if the development of machine vision can solve these problems to a certain extent, non -standardized operations will reduce efficiency accordingly. Industrial robots can not only achieve simple processes such as handling, but also technically some complex processes can be achieved. However, for the consideration of cost and benefits, most industrial robot manufacturers will not choose to produce such products. Because such demand is not large enough, and the profit margin is not considerable enough.","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"9 2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129034758","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Online education is a significant part of information education. It is an effective way to uncover online learning mechanisms and improve the quality of online teaching by exploiting the behavioral data of online learning platforms for learning performance prediction and analysis. In this paper, we focus on the learner’s learning behavior in an online teaching scenario and explore the predictive effectiveness and impact mechanism of each behavioral feature by building a predictive model based on a machine learning algorithm. Experimental results show that three behavioral characteristics, namely the number of visits to course materials, lecture review time, and assignment, intensively influence learning performance. By comparing various machine learning algorithms, it is found that the random forest algorithm has better prediction results.
{"title":"The Influence of Online Learning Behavior on Learning Performance","authors":"Huiming Li","doi":"10.22158/asir.v7n1p69","DOIUrl":"https://doi.org/10.22158/asir.v7n1p69","url":null,"abstract":"Online education is a significant part of information education. It is an effective way to uncover online learning mechanisms and improve the quality of online teaching by exploiting the behavioral data of online learning platforms for learning performance prediction and analysis. In this paper, we focus on the learner’s learning behavior in an online teaching scenario and explore the predictive effectiveness and impact mechanism of each behavioral feature by building a predictive model based on a machine learning algorithm. Experimental results show that three behavioral characteristics, namely the number of visits to course materials, lecture review time, and assignment, intensively influence learning performance. By comparing various machine learning algorithms, it is found that the random forest algorithm has better prediction results.","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115500751","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Because the number of private cars has expanded, drunk driving has become more and more frequent. The detection of a driver’s alcohol concentration has become the focus of attention. Therefore, infrared alcohol detection was studied. The principle of infrared blood glucose noninvasive detection was investigated, and it was compared with infrared spectrum detection. Finally, using transmission technology and an infrared emitter and receiver, an infrared alcohol identification circuit was designed by NBohr’s Law and the Correcting Beer-Lambert Law. It was composed of an infrared acquisition circuit, an infrared electronic filter circuit, and an infrared amplifier circuit. And the infrared alcohol identification circuit was composed of multiple circuits in series and parallel. At various pins on the first AD844AN, the infrared electronic filter circuit receives an alternating current source voltage of 1000V with a basic signal frequency of 60 Hz. At the input end, the infrared amplifier circuit receives a current signal with a frequency of 1 Hz and an amplitude of 5 uA and performs the reproduction experiment using Multisim. As a result of the signal being upgraded to fulfill the objective of recognition, distinct information reappears and exhibits different waveforms.
{"title":"Near-Infrared Alcohol Detection Circuit Based On Multisim","authors":"Shiyu Cai, Shimoyu Meng, Wen Li, Jiayue Liu","doi":"10.22158/asir.v7n1p58","DOIUrl":"https://doi.org/10.22158/asir.v7n1p58","url":null,"abstract":"Because the number of private cars has expanded, drunk driving has become more and more frequent. The detection of a driver’s alcohol concentration has become the focus of attention. Therefore, infrared alcohol detection was studied. The principle of infrared blood glucose noninvasive detection was investigated, and it was compared with infrared spectrum detection. Finally, using transmission technology and an infrared emitter and receiver, an infrared alcohol identification circuit was designed by NBohr’s Law and the Correcting Beer-Lambert Law. It was composed of an infrared acquisition circuit, an infrared electronic filter circuit, and an infrared amplifier circuit. And the infrared alcohol identification circuit was composed of multiple circuits in series and parallel. At various pins on the first AD844AN, the infrared electronic filter circuit receives an alternating current source voltage of 1000V with a basic signal frequency of 60 Hz. At the input end, the infrared amplifier circuit receives a current signal with a frequency of 1 Hz and an amplitude of 5 uA and performs the reproduction experiment using Multisim. As a result of the signal being upgraded to fulfill the objective of recognition, distinct information reappears and exhibits different waveforms.","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125568439","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper firstly formalizes Aristotelian modal syllogisms by taking advantage of the trisection structure of (modal) categorical propositions. And then making full use of the truth value definition of (modal) categorical propositions, the transformable relations between an Aristotelian quantifier and its three negative quantifiers, the reasoning rules of classical propositional logic, and the symmetry of the two Aristotelian quantifiers (i.e. some and no), this paper shows that at least 91 valid Aristotelian modal syllogisms can be deduced from IAI-3 on the basis of possible world semantics and set theory. The reason why these valid Aristotelian modal syllogisms can be reduced is that any Aristotelian quantifier can be defined by the other three Aristotelian quantifiers, and the necessary modality ( ) and possible modality ( ) can also be defined mutually. This research method is universal. This innovative study not only provides a unified mathematical research paradigm for the study of generalized modal syllogistic and other kinds of syllogistic, but also makes contributions to knowledge representation and knowledge reasoning in computer science.
{"title":"How to Deduce the Other 91 Valid Aristotelian Modal Syllogisms from the Syllogism IAI-3","authors":"Cheng Zhang","doi":"10.22158/asir.v7n1p46","DOIUrl":"https://doi.org/10.22158/asir.v7n1p46","url":null,"abstract":"This paper firstly formalizes Aristotelian modal syllogisms by taking advantage of the trisection structure of (modal) categorical propositions. And then making full use of the truth value definition of (modal) categorical propositions, the transformable relations between an Aristotelian quantifier and its three negative quantifiers, the reasoning rules of classical propositional logic, and the symmetry of the two Aristotelian quantifiers (i.e. some and no), this paper shows that at least 91 valid Aristotelian modal syllogisms can be deduced from IAI-3 on the basis of possible world semantics and set theory. The reason why these valid Aristotelian modal syllogisms can be reduced is that any Aristotelian quantifier can be defined by the other three Aristotelian quantifiers, and the necessary modality ( ) and possible modality ( ) can also be defined mutually. This research method is universal. This innovative study not only provides a unified mathematical research paradigm for the study of generalized modal syllogistic and other kinds of syllogistic, but also makes contributions to knowledge representation and knowledge reasoning in computer science.","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115298414","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Green construction management in our country after many years of development has made great progress, but at the same time, it has also exposed many problems and shortcomings. With the development and application of smart site technology, the new information technology represented by smart site will open a new situation for green construction management. At present, the development of smart site technology in the industry has begun to take shape, but the main application direction is still in the safety management. In this paper, the problems of green construction management are studied. Based on the analysis of the needs of green construction management in the smart site platform, a green construction management scheme based on smart site is proposed to improve the management level of green construction.
{"title":"Research on Green Construction Management in Smart Site Platform","authors":"Zhu Mengshu","doi":"10.22158/asir.v7n1p38","DOIUrl":"https://doi.org/10.22158/asir.v7n1p38","url":null,"abstract":"Green construction management in our country after many years of development has made great progress, but at the same time, it has also exposed many problems and shortcomings. With the development and application of smart site technology, the new information technology represented by smart site will open a new situation for green construction management. At present, the development of smart site technology in the industry has begun to take shape, but the main application direction is still in the safety management. In this paper, the problems of green construction management are studied. Based on the analysis of the needs of green construction management in the smart site platform, a green construction management scheme based on smart site is proposed to improve the management level of green construction.","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"541 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115639554","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Syllogism reasoning is a common and important form of reasoning in human thinking from Aristotle onwards. To overcome the shortcomings of previous studies, this article makes full use of set theory and classical propositional logic, and deduces the remaining 23 valid syllogisms only on the basis of the syllogism EIO-2 from the perspective of mathematical structuralism, and then successfully establishes a concise formal axiom system for categorical syllogistic logic. More specifically, the article takes advantage of the trisection structure of categorical propositions such as Q(a, b), the transformation relations between an Aristotelian quantifier and its inner and outer negation, the symmetry of the two Aristotelian quantifier (that is, no and some), and some inference rules in classical propositional logic, and derives the remaining 23 valid syllogisms from the syllogism EIO-2, so as to realize the reduction between different valid categorical syllogisms.
{"title":"Reduction between Categorical Syllogisms Based on the Syllogism EIO-2","authors":"Hui Li","doi":"10.22158/asir.v7n1p30","DOIUrl":"https://doi.org/10.22158/asir.v7n1p30","url":null,"abstract":"Syllogism reasoning is a common and important form of reasoning in human thinking from Aristotle onwards. To overcome the shortcomings of previous studies, this article makes full use of set theory and classical propositional logic, and deduces the remaining 23 valid syllogisms only on the basis of the syllogism EIO-2 from the perspective of mathematical structuralism, and then successfully establishes a concise formal axiom system for categorical syllogistic logic. More specifically, the article takes advantage of the trisection structure of categorical propositions such as Q(a, b), the transformation relations between an Aristotelian quantifier and its inner and outer negation, the symmetry of the two Aristotelian quantifier (that is, no and some), and some inference rules in classical propositional logic, and derives the remaining 23 valid syllogisms from the syllogism EIO-2, so as to realize the reduction between different valid categorical syllogisms.","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133916721","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In the extensive industrial production process, a large amount of silver containing wastewater has been produced, and the veil of its potential harm has gradually been unveiled. The emission standards of various pollutants formulated and issued by the Ministry of Ecology and Environment of China have already strictly limited the emission limits of silver. In this paper, a simple, environment-friendly and inexpensive method was used to synthesize a composite material with reducing and adsorbing effects on silver by using purified attapulgite and ferrous salt (FeSO4·7H2O) as raw materials, potassium borohydride (KBH4) as reducing agent, and chemical liquid phase reduction method. The experimental results showed that under the conditions of 1:1 ratio of iron to soil, 0.25 mol·L-1 concentration of KBH4, 25 C temperature and 120 min time, the synthesized attapulgite loaded nano-zero-valent iron composite (nZVI/ATP) had good adsorption performance for Ag(I).
{"title":"Preparation of Attapulgite Loaded Nano Zero Valent Iron Material and Its Adsorption of Silver","authors":"Leilei Bao, H. Shen, Jiale Cheng, Chunyan Lang","doi":"10.22158/asir.v7n1p19","DOIUrl":"https://doi.org/10.22158/asir.v7n1p19","url":null,"abstract":"In the extensive industrial production process, a large amount of silver containing wastewater has been produced, and the veil of its potential harm has gradually been unveiled. The emission standards of various pollutants formulated and issued by the Ministry of Ecology and Environment of China have already strictly limited the emission limits of silver. In this paper, a simple, environment-friendly and inexpensive method was used to synthesize a composite material with reducing and adsorbing effects on silver by using purified attapulgite and ferrous salt (FeSO4·7H2O) as raw materials, potassium borohydride (KBH4) as reducing agent, and chemical liquid phase reduction method. The experimental results showed that under the conditions of 1:1 ratio of iron to soil, 0.25 mol·L-1 concentration of KBH4, 25 C temperature and 120 min time, the synthesized attapulgite loaded nano-zero-valent iron composite (nZVI/ATP) had good adsorption performance for Ag(I).","PeriodicalId":356167,"journal":{"name":"Applied Science and Innovative Research","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133400059","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：