Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470509
A. Susanto, Rizal Broer Bahaweres, Hangjung Zo
With the emergence of electronic banking use, satisfaction and trust become crucial and prominent factors in determining online banking success, whereas consumers' reluctance in directing their decisions to adopt and use e-commerce has remarked the significant aspect of trust, security, and privacy in either traditional and online commerce systems. This study proposes an extended framework based on the DeLone and McLean's IS Success Model incorporated into the development of consumer's usage and behaviors towards Internet-based banking services in Indonesia. The results of this study show that security was the most important concern for user satisfaction, which in turn strongly affected Internet banking usage in Indonesia. Satisfaction influenced both consumer's trust and usage significantly. Interestingly, trust was found insignificant on Internet banking usage. The study will derive conclusions including subsequent discussions and implications.
{"title":"Exploring the influential antecedents of actual use of internet banking services in Indonesia","authors":"A. Susanto, Rizal Broer Bahaweres, Hangjung Zo","doi":"10.1109/CCSII.2012.6470509","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470509","url":null,"abstract":"With the emergence of electronic banking use, satisfaction and trust become crucial and prominent factors in determining online banking success, whereas consumers' reluctance in directing their decisions to adopt and use e-commerce has remarked the significant aspect of trust, security, and privacy in either traditional and online commerce systems. This study proposes an extended framework based on the DeLone and McLean's IS Success Model incorporated into the development of consumer's usage and behaviors towards Internet-based banking services in Indonesia. The results of this study show that security was the most important concern for user satisfaction, which in turn strongly affected Internet banking usage in Indonesia. Satisfaction influenced both consumer's trust and usage significantly. Interestingly, trust was found insignificant on Internet banking usage. The study will derive conclusions including subsequent discussions and implications.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128795083","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470478
F. Jusuf, E. Joelianto
This paper deals with the problem of networked-control system stability. A networked control system with simultaneous consideration of flaws induced by networks is modeled as a time-delay system with input delay approach. The induced quantization error is considered as a sum of saturation and of a uniformly bounded disturbance. An approach based on time-delay model and time-dependent Lyapunov-Krasovskii functional is proposed to analyze stability and to design a controller.
{"title":"Stabilization of networked control system with time delay induced by network imperfections","authors":"F. Jusuf, E. Joelianto","doi":"10.1109/CCSII.2012.6470478","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470478","url":null,"abstract":"This paper deals with the problem of networked-control system stability. A networked control system with simultaneous consideration of flaws induced by networks is modeled as a time-delay system with input delay approach. The induced quantization error is considered as a sum of saturation and of a uniformly bounded disturbance. An approach based on time-delay model and time-dependent Lyapunov-Krasovskii functional is proposed to analyze stability and to design a controller.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131655674","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470470
T. Mantoro, Y. Prihastomo
Intellectual Property Rights (IPR) system is an important element, which supports the economic development through the creation of innovative environments and the enhancement of competitiveness of the nation. Directorate General of Intellectual Property Rights (DGIPR) is a government office under the Ministry of Law and Human Rights-Republic of Indonesia which is responsible for the registration and protection of intellectual property including patents, trademarks, copyright, industrial designs, layout designs of integrated circuits and trade secrets. DGIPR is also responsible for disseminating information on intellectual property (IP). Indonesia is one of the largest archipelago countries and has 33 provinces. Nowadays, many people find it difficult to obtain IP information of each province, such as: the flagship trademark, patent research or geographical indication product of a province. At the same time, there is no application or system in Indonesia that provides IP-based mobile information services. The aim of this study is to develop and disseminate the IPR information system through location awareness based on mobile devices. This system also integrates with social networks such as Facebook and twitter.
{"title":"Intellectual Property Rights information system with location aware capability","authors":"T. Mantoro, Y. Prihastomo","doi":"10.1109/CCSII.2012.6470470","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470470","url":null,"abstract":"Intellectual Property Rights (IPR) system is an important element, which supports the economic development through the creation of innovative environments and the enhancement of competitiveness of the nation. Directorate General of Intellectual Property Rights (DGIPR) is a government office under the Ministry of Law and Human Rights-Republic of Indonesia which is responsible for the registration and protection of intellectual property including patents, trademarks, copyright, industrial designs, layout designs of integrated circuits and trade secrets. DGIPR is also responsible for disseminating information on intellectual property (IP). Indonesia is one of the largest archipelago countries and has 33 provinces. Nowadays, many people find it difficult to obtain IP information of each province, such as: the flagship trademark, patent research or geographical indication product of a province. At the same time, there is no application or system in Indonesia that provides IP-based mobile information services. The aim of this study is to develop and disseminate the IPR information system through location awareness based on mobile devices. This system also integrates with social networks such as Facebook and twitter.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124412047","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470468
N. Shariatzadeh, G. Sivard, M. Hedlind, C. Wickman
A fundamental requirement for executing Discrete Event Simulation (DES) is incorporating a data structure that represents process, product and resource information, their interrelations. Further, the capability of integrating this data structure with other types of information such as geometry, e.g. for sizes of products or distances of transports, is of vital interest. Manufacturing information is normally not integrated but is heterogeneous and stored in different Computer Aided Design (CAD), and Computer Aided Manufacturing (CAM) applications in the factory plant. Therefore it is important to create an information sharing repository that is based on a standardized and system neutral format to enable interoperability. Availability of relevant information would considerably cut the time of building the DES models, prevent mistakes in data entry and facilitate the reconfiguration analysis. This paper aims to describe how to represent the main required operational data of a manufacturing system for DES by using ISO 10303 Application Protocol 214 (STEP AP214) in order to fulfill the mentioned characteristics of data and information. Stochastic properties of manufacturing resource and corresponding processes such as measured cycle time and disturbances information are represented using application module 1274 (ISO 103031274) that defines a particular schema for probability distribution representation. A test implementation of the mentioned data including a graphical user interface has been carried out to show the feasibility of the research approach.
执行离散事件仿真(DES)的一个基本要求是结合一个表示过程、产品和资源信息及其相互关系的数据结构。此外，将这种数据结构与其他类型的信息(如几何形状，例如产品的大小或运输距离)集成的能力是至关重要的。制造信息通常不是集成的，而是异构的，存储在工厂中不同的计算机辅助设计(CAD)和计算机辅助制造(CAM)应用程序中。因此，重要的是创建一个基于标准化和系统无关格式的信息共享存储库，以实现互操作性。有关资料的提供将大大缩短建立DES模型的时间，防止数据输入错误，并促进重新配置分析。本文旨在描述如何使用ISO 10303应用协议214 (STEP AP214)来表示DES制造系统所需的主要操作数据，以满足上述数据和信息的特征。使用应用模块1274 (ISO 103031274)来表示制造资源和相应过程的随机特性，如测量的周期时间和干扰信息，该模块定义了一个特定的概率分布表示模式。对上述数据进行了测试实现，包括图形用户界面，以显示研究方法的可行性。
{"title":"Material flow data representation and integration based on STEP","authors":"N. Shariatzadeh, G. Sivard, M. Hedlind, C. Wickman","doi":"10.1109/CCSII.2012.6470468","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470468","url":null,"abstract":"A fundamental requirement for executing Discrete Event Simulation (DES) is incorporating a data structure that represents process, product and resource information, their interrelations. Further, the capability of integrating this data structure with other types of information such as geometry, e.g. for sizes of products or distances of transports, is of vital interest. Manufacturing information is normally not integrated but is heterogeneous and stored in different Computer Aided Design (CAD), and Computer Aided Manufacturing (CAM) applications in the factory plant. Therefore it is important to create an information sharing repository that is based on a standardized and system neutral format to enable interoperability. Availability of relevant information would considerably cut the time of building the DES models, prevent mistakes in data entry and facilitate the reconfiguration analysis. This paper aims to describe how to represent the main required operational data of a manufacturing system for DES by using ISO 10303 Application Protocol 214 (STEP AP214) in order to fulfill the mentioned characteristics of data and information. Stochastic properties of manufacturing resource and corresponding processes such as measured cycle time and disturbances information are represented using application module 1274 (ISO 103031274) that defines a particular schema for probability distribution representation. A test implementation of the mentioned data including a graphical user interface has been carried out to show the feasibility of the research approach.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"66 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115905781","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470492
G. Dolecek, A. Fernández-Vázquez
This paper presents the passband-droop compensation of a modified non-recursive comb filter where the decimation factor is a power of two. The modified non-recursive comb filter is introduced to improve the alias reduction in the first folding band while keeping a low power characteristic of a non-recursive comb structure. The compensation filter is a multiplierless filter which works at low rate. The parameter of the filter depends on the cascade of filters in the last stage of the modified comb filter and does not depend on the decimation factor. In such way it is not necessary to redesign the compensation filter for new parameters.
{"title":"Passband-droop compensation of modified non-recursive comb filter","authors":"G. Dolecek, A. Fernández-Vázquez","doi":"10.1109/CCSII.2012.6470492","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470492","url":null,"abstract":"This paper presents the passband-droop compensation of a modified non-recursive comb filter where the decimation factor is a power of two. The modified non-recursive comb filter is introduced to improve the alias reduction in the first folding band while keeping a low power characteristic of a non-recursive comb structure. The compensation filter is a multiplierless filter which works at low rate. The parameter of the filter depends on the cascade of filters in the last stage of the modified comb filter and does not depend on the decimation factor. In such way it is not necessary to redesign the compensation filter for new parameters.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"32 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125361363","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470491
M. Zeinali, I. Darus, A. Taghavi
The front double wishbone suspension parameters are related as a multi-body model. By replacing the new suspension and steering hard points, the performance of the suspension system is studied using CATIA and MSC ADAMS software for modeling and analyzing, respectively. In this case two tests were done, steady state circular test in ADAMS/View and parallel wheel travel in ADAMS/Car. The strut position is directly related to Kingpin inclination angle and scrub radius. The increase the amount of these two parameters has an effect on steering performance in low speed and negative displacement, such as camber, caster and Kingpin inclination angles in negative displacement of wheels. Moreover, the same tests in rear double wishbone suspension show that the growth has no effect on camber, caster and Kingpin inclination angles. So, the major effect of this geometry is on the front independent suspension. In this project, the details were selected on electric vehicle (EV) for kinematics analysis.
{"title":"Effect of front double wishbone strut position on vehicle steering and suspension performance","authors":"M. Zeinali, I. Darus, A. Taghavi","doi":"10.1109/CCSII.2012.6470491","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470491","url":null,"abstract":"The front double wishbone suspension parameters are related as a multi-body model. By replacing the new suspension and steering hard points, the performance of the suspension system is studied using CATIA and MSC ADAMS software for modeling and analyzing, respectively. In this case two tests were done, steady state circular test in ADAMS/View and parallel wheel travel in ADAMS/Car. The strut position is directly related to Kingpin inclination angle and scrub radius. The increase the amount of these two parameters has an effect on steering performance in low speed and negative displacement, such as camber, caster and Kingpin inclination angles in negative displacement of wheels. Moreover, the same tests in rear double wishbone suspension show that the growth has no effect on camber, caster and Kingpin inclination angles. So, the major effect of this geometry is on the front independent suspension. In this project, the details were selected on electric vehicle (EV) for kinematics analysis.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129884976","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470483
A. Majid, E. Joelianto
The rapid development of Wireless Sensor Network (WSN) has increased its application in the military, industry, medical, and environment. Coverage improvement is one of the main issue in WSN deployment. Maximum coverage ensures a better utility of the WSN. This paper considers the use of Discrete Particle Swarm Optimization (Discrete PSO) algorithm to deal with optimal deployment problem in non-convex region. Simulation results show that the Discrete PSO algorithm leads to performance improvement compared with random sensor deployment.
{"title":"Optimal sensor deployment in non-convex region using Discrete Particle Swarm Optimization algorithm","authors":"A. Majid, E. Joelianto","doi":"10.1109/CCSII.2012.6470483","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470483","url":null,"abstract":"The rapid development of Wireless Sensor Network (WSN) has increased its application in the military, industry, medical, and environment. Coverage improvement is one of the main issue in WSN deployment. Maximum coverage ensures a better utility of the WSN. This paper considers the use of Discrete Particle Swarm Optimization (Discrete PSO) algorithm to deal with optimal deployment problem in non-convex region. Simulation results show that the Discrete PSO algorithm leads to performance improvement compared with random sensor deployment.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127909837","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470498
N. A. Jalil, I. Darus, M. Mohamad
The dynamics characterisation and modelling of a flexible cantilever (fixed-free) beam in transverse motion is presented in this paper. Finite Difference (FD) numerical analysis method is used to simulate the vibration of flexible cantilever beam system. The FD algorithm developed is validated through comparison of its natural frequencies of vibration with the theoretical values. Using input-output data obtained via FD simulation, nonparametric system identification of the flexible beam using intelligent Neural Network (NN) and Adaptive Neuro Fuzzy Inference System (ANFIS) are developed. Results indicated a comparable performance of both intelligent algorithms in modelling the flexible beam. The simulation environments produced in this research can later be utilised as a platform for development and verification of an active vibration control of the flexible cantilever beam.
{"title":"Neuro-fuzzy Identification of Flexible Beam Structure","authors":"N. A. Jalil, I. Darus, M. Mohamad","doi":"10.1109/CCSII.2012.6470498","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470498","url":null,"abstract":"The dynamics characterisation and modelling of a flexible cantilever (fixed-free) beam in transverse motion is presented in this paper. Finite Difference (FD) numerical analysis method is used to simulate the vibration of flexible cantilever beam system. The FD algorithm developed is validated through comparison of its natural frequencies of vibration with the theoretical values. Using input-output data obtained via FD simulation, nonparametric system identification of the flexible beam using intelligent Neural Network (NN) and Adaptive Neuro Fuzzy Inference System (ANFIS) are developed. Results indicated a comparable performance of both intelligent algorithms in modelling the flexible beam. The simulation environments produced in this research can later be utilised as a platform for development and verification of an active vibration control of the flexible cantilever beam.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127955041","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470506
Tedjo Darmanto, I. Suwardi, R. Munir
The metamorphic technology is very important and can make an animation more attractive. The cyclical metamorphic animation of fractal images can be constructed by more than two fractal images. The multi-transitional IFS code can represent the multiple fractal images as the nodes of the iteration of the cyclical animation. To have the interpolation between the source and target of fractal images looked natural, the IFS code form of fractal attractors should be in a family with the correct order and the same number of transformation functions and relatively with the same size of attractors.
{"title":"Cyclical metamorphic animation of fractal images based on a family of multi-transitional IFS code approach","authors":"Tedjo Darmanto, I. Suwardi, R. Munir","doi":"10.1109/CCSII.2012.6470506","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470506","url":null,"abstract":"The metamorphic technology is very important and can make an animation more attractive. The cyclical metamorphic animation of fractal images can be constructed by more than two fractal images. The multi-transitional IFS code can represent the multiple fractal images as the nodes of the iteration of the cyclical animation. To have the interpolation between the source and target of fractal images looked natural, the IFS code form of fractal attractors should be in a family with the correct order and the same number of transformation functions and relatively with the same size of attractors.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132910250","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2012-09-01DOI: 10.1109/CCSII.2012.6470486
Sutrisno, Salmah, I. E. Wijayanti
Most of the literatures use game approach to design distributed controller such as Feasible Cooperation MPC and Nash-bargaining MPC that contains the weighting for linear convex combination of objective functions. In this paper, we propose a scheme to determine the weighting values that proportional to the control load for each subsystem. To observe the effect of our weighting scheme, we apply the weighting scheme to control the irrigation canal using Feasible-Cooperation MPC and Nash-bargaining MPC. We choose the weighting values are proportional to the volume for each subsystem. We compare the result with weighting that are same for all subsystems. From the numerical simulation results, the total cost of our weighting give better result.
{"title":"Distributed model predictive control and application to irrigation canal","authors":"Sutrisno, Salmah, I. E. Wijayanti","doi":"10.1109/CCSII.2012.6470486","DOIUrl":"https://doi.org/10.1109/CCSII.2012.6470486","url":null,"abstract":"Most of the literatures use game approach to design distributed controller such as Feasible Cooperation MPC and Nash-bargaining MPC that contains the weighting for linear convex combination of objective functions. In this paper, we propose a scheme to determine the weighting values that proportional to the control load for each subsystem. To observe the effect of our weighting scheme, we apply the weighting scheme to control the irrigation canal using Feasible-Cooperation MPC and Nash-bargaining MPC. We choose the weighting values are proportional to the volume for each subsystem. We compare the result with weighting that are same for all subsystems. From the numerical simulation results, the total cost of our weighting give better result.","PeriodicalId":389895,"journal":{"name":"2012 IEEE Conference on Control, Systems & Industrial Informatics","volume":"19 3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128171566","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：