Abstract Effects of spatial fluctuations of soil parameters are considered in a new context – considering variability of soil parameters in conjunction with non-uniform stress fields, which can locally amplify (or suppress) subsoil inhomogeneities. In this way, several design situations for the Coulomb frictional material with random tan(φ(x)) reveal a reduction of variance, which is less significant than for the standard volume averaging. When looking for an ‘effective’ random variable [tan(φ)]a – that is, a random variable, which is equivalent to the random field tan(φ(x)) – the Vanmarcke averaging by simple volume integrals is insufficient; it systematically overestimates effects of variance reduction, thus causing potentially unsafe situations. The new proposed approach is coherent, formally defined and more realistic.
{"title":"Stress-weighted spatial averaging of random fields in geotechnical risk assessment","authors":"W. Brzakala","doi":"10.2478/sgem-2021-0039","DOIUrl":"https://doi.org/10.2478/sgem-2021-0039","url":null,"abstract":"Abstract Effects of spatial fluctuations of soil parameters are considered in a new context – considering variability of soil parameters in conjunction with non-uniform stress fields, which can locally amplify (or suppress) subsoil inhomogeneities. In this way, several design situations for the Coulomb frictional material with random tan(φ(x)) reveal a reduction of variance, which is less significant than for the standard volume averaging. When looking for an ‘effective’ random variable [tan(φ)]a – that is, a random variable, which is equivalent to the random field tan(φ(x)) – the Vanmarcke averaging by simple volume integrals is insufficient; it systematically overestimates effects of variance reduction, thus causing potentially unsafe situations. The new proposed approach is coherent, formally defined and more realistic.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"43 1","pages":"465 - 478"},"PeriodicalIF":0.6,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41772714","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Brick sewers were designed as egg-shaped, pear-shaped, bell-shaped, vaulted, and even rectangular (sometimes with granite ceilings and floor slabs). In exceptional cases, circular sections were also made of brick. Efforts were made in order to ensure optimal flow conditions, and also that the cross-section was adapted to the shape of the rock mass pressure line. This is due to the fact that the most advantageous shapes for masonry collectors are shapes in which no tensile stresses will occur in any part of the cross-section under the influence of external loads. Nevertheless, sewage conduits degrade over time. The boundary conditions of their use also change, which affects the magnitude of mechanical and hydraulic loads. Further use of a sewer in such a case requires its renewal, and less frequently, modernization that results from the necessity to change its function. This is usually done by introducing a new conduit into the interior of the renovated or modernized sewer, which in literature is called a liner. The aim of the analysis was to determine the thickness of the liners that strengthen the structures of brick channels with an inverted egg cross-section and with dimensions of 1050 × 700 mm, which are intended for gravitational sewage systems. The analysis included the performance of variant static and strength calculations for the assumption that the conduit after its modernization will be replaced with a conduit operating in the pressure system, which is a very rare requirement. It was assumed that the best solution would be to use a CIPP (Cured In Place Pipe) liner.
{"title":"Analysis of the structure of liners used for the modernisation of brick collectors","authors":"L. Wysocki, C. Madryas, J. Grosel","doi":"10.2478/sgem-2021-0031","DOIUrl":"https://doi.org/10.2478/sgem-2021-0031","url":null,"abstract":"Abstract Brick sewers were designed as egg-shaped, pear-shaped, bell-shaped, vaulted, and even rectangular (sometimes with granite ceilings and floor slabs). In exceptional cases, circular sections were also made of brick. Efforts were made in order to ensure optimal flow conditions, and also that the cross-section was adapted to the shape of the rock mass pressure line. This is due to the fact that the most advantageous shapes for masonry collectors are shapes in which no tensile stresses will occur in any part of the cross-section under the influence of external loads. Nevertheless, sewage conduits degrade over time. The boundary conditions of their use also change, which affects the magnitude of mechanical and hydraulic loads. Further use of a sewer in such a case requires its renewal, and less frequently, modernization that results from the necessity to change its function. This is usually done by introducing a new conduit into the interior of the renovated or modernized sewer, which in literature is called a liner. The aim of the analysis was to determine the thickness of the liners that strengthen the structures of brick channels with an inverted egg cross-section and with dimensions of 1050 × 700 mm, which are intended for gravitational sewage systems. The analysis included the performance of variant static and strength calculations for the assumption that the conduit after its modernization will be replaced with a conduit operating in the pressure system, which is a very rare requirement. It was assumed that the best solution would be to use a CIPP (Cured In Place Pipe) liner.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"43 1","pages":"501 - 509"},"PeriodicalIF":0.6,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45807433","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Patrycja Stanowska, J. Dziopak, D. Słyś, M. Starzec
Abstract The paper focuses on the possibilities of rainwater flow control in an innovative rainwater system which is equipped with a retention canals system. Sewage retention canal is a modern solution that provides effective retention of excess rainwater by using a capacity of sewer pipes and manholes. The retention is possible by using special damming partitions which have flow openings. The hydraulic working of the traditional rainwater system and the innovative rainwater system were compared with each other. The analysis was based on the results obtained from simulations using hydrodynamic modeling. Maximum possible values of rainwater outflow intensity from outlet nodes for the traditional rainwater system and the innovative rainwater system were discussed. On the basis of the analysis it was shown that the innovative rainwater system outweighs the classic rainwater one. It discharges two functions: transports and simultaneously retains excess rainwater in canals.
{"title":"An innovative rainwater system as an effective alternative for cubature retention facilities","authors":"Patrycja Stanowska, J. Dziopak, D. Słyś, M. Starzec","doi":"10.2478/sgem-2021-0037","DOIUrl":"https://doi.org/10.2478/sgem-2021-0037","url":null,"abstract":"Abstract The paper focuses on the possibilities of rainwater flow control in an innovative rainwater system which is equipped with a retention canals system. Sewage retention canal is a modern solution that provides effective retention of excess rainwater by using a capacity of sewer pipes and manholes. The retention is possible by using special damming partitions which have flow openings. The hydraulic working of the traditional rainwater system and the innovative rainwater system were compared with each other. The analysis was based on the results obtained from simulations using hydrodynamic modeling. Maximum possible values of rainwater outflow intensity from outlet nodes for the traditional rainwater system and the innovative rainwater system were discussed. On the basis of the analysis it was shown that the innovative rainwater system outweighs the classic rainwater one. It discharges two functions: transports and simultaneously retains excess rainwater in canals.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"43 1","pages":"532 - 547"},"PeriodicalIF":0.6,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41651766","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The mining of underground deposits causes the inflow of water to workings and the necessity of pumping them to the surface. The mining plant of KGHM Polska Miedź S.A. extracts copper ore in plant branches with different hydrogeological conditions. The inflowing water into the workings is characterised by variable mineralisation, which depends on the location of the branch. In the south-western part of the deposit, a low-mineralised stream with a relatively high flow rate can be observed, while the outflow of highly saline waters occurs in the north-eastern branch. Despite the activities undertaken that aim at using the pumped-off mine waters industrially, it is necessary to deposit them into the Odra River. Reducing the environmental impact on the Odra River is one of KGHM's goals, which is being implemented by stabilising its salt concentration at a safe level. The paper presents the results of a 3D simulation of brine plume propagation based on a numerical model of advection–diffusion and turbulent flow. Bathymetric data from a section of the river approximately 500 m long and point data from an Odra water quality test were used to develop and validate the model. The paper discusses the types of factors that minimise the impact of brine discharge. The developed model will be used in the future to propose solutions that accelerate the mixing of mine waters with the waters of the Odra River.
摘要地下矿床的开采导致水流入工作区，并有必要将其泵送至地表。KGHM Polska Miedß美国采矿厂在不同水文地质条件下的工厂分支中提取铜矿。流入工作区的水具有可变矿化特征，这取决于分支的位置。在矿床的西南部，可以观察到具有相对较高流速的低矿化水流，而高盐水的流出发生在东北部支流。尽管开展了旨在将抽离的矿井水用于工业的活动，但仍有必要将其注入奥德拉河。减少对奥德拉河的环境影响是KGHM的目标之一，该目标通过将其盐浓度稳定在安全水平来实现。本文介绍了基于平流-扩散和湍流数值模型的盐水羽流传播的三维模拟结果。使用约500米长河段的水深数据和奥德拉水质测试的点数据来开发和验证该模型。本文讨论了将盐水排放影响降至最低的因素类型。开发的模型将在未来用于提出加速矿井水与奥德拉河混合的解决方案。
{"title":"Numerical analysis of the transport of brine in the Odra River downstream of a mine's discharge","authors":"Szymon Zieliński, S. Kostecki, P. Stefanek","doi":"10.2478/sgem-2021-0036","DOIUrl":"https://doi.org/10.2478/sgem-2021-0036","url":null,"abstract":"Abstract The mining of underground deposits causes the inflow of water to workings and the necessity of pumping them to the surface. The mining plant of KGHM Polska Miedź S.A. extracts copper ore in plant branches with different hydrogeological conditions. The inflowing water into the workings is characterised by variable mineralisation, which depends on the location of the branch. In the south-western part of the deposit, a low-mineralised stream with a relatively high flow rate can be observed, while the outflow of highly saline waters occurs in the north-eastern branch. Despite the activities undertaken that aim at using the pumped-off mine waters industrially, it is necessary to deposit them into the Odra River. Reducing the environmental impact on the Odra River is one of KGHM's goals, which is being implemented by stabilising its salt concentration at a safe level. The paper presents the results of a 3D simulation of brine plume propagation based on a numerical model of advection–diffusion and turbulent flow. Bathymetric data from a section of the river approximately 500 m long and point data from an Odra water quality test were used to develop and validate the model. The paper discusses the types of factors that minimise the impact of brine discharge. The developed model will be used in the future to propose solutions that accelerate the mixing of mine waters with the waters of the Odra River.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"43 1","pages":"366 - 379"},"PeriodicalIF":0.6,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42838778","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The paper discusses existing reinforcement, future reinforcement and new technologies for concrete pipes used in the sewage systems. Concrete pipes currently in use and under investigation are reviewed. Structural fibres, as the main reinforcement of concrete pipes, are known as an attractive alternative to the traditional steel bars. Steel, synthetic and basalt fibres have been considered. The latest research and mechanical properties of individual fibres are presented. Advances in fibre-reinforced concrete provide a new basis for the design of more efficient concrete pipes, especially those resistant to biological corrosion and with a longer service life. In the article, future non-corrosive reinforcement due to the reduction of steel reinforcement and corrosion protection linings has been proposed.
{"title":"Modern concrete pipes: a review of reinforcement and new technologies","authors":"T. Abel, Natalia Pelczar","doi":"10.2478/sgem-2021-0038","DOIUrl":"https://doi.org/10.2478/sgem-2021-0038","url":null,"abstract":"Abstract The paper discusses existing reinforcement, future reinforcement and new technologies for concrete pipes used in the sewage systems. Concrete pipes currently in use and under investigation are reviewed. Structural fibres, as the main reinforcement of concrete pipes, are known as an attractive alternative to the traditional steel bars. Steel, synthetic and basalt fibres have been considered. The latest research and mechanical properties of individual fibres are presented. Advances in fibre-reinforced concrete provide a new basis for the design of more efficient concrete pipes, especially those resistant to biological corrosion and with a longer service life. In the article, future non-corrosive reinforcement due to the reduction of steel reinforcement and corrosion protection linings has been proposed.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"43 1","pages":"548 - 557"},"PeriodicalIF":0.6,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45447701","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Vibro piles belong to the group of full displacement piles with an expanded base, characterised by a very high load capacity, especially in non-cohesive soils. The problem is to adopt a reliable method for the determination of full load–settlement (Q–s) curve. A frequent difficulty is the determination of the load capacity limit based on the static load test because the course of the load–settlement curve is of a linear nature. This publication presents the empirical method. It allows direct prediction of a full axially loaded pile settlement curve based on the values of qc cone resistance obtained in cone penetration test (CPT). The advantage offered by this procedure is the accuracy of the obtained limit values in relation to the actual load-bearing capacity as compared to other methods based on soil parameters obtained in in situ testing. An additional advantage is the Q–s characteristics, which enable designing for intermediate values, allowing for the criterion of minimal or equal settlements. The shape of analytical curves was compared with static pile load test (SPLT) curves. This comparison showed large convergences between the analytical and measured curves.
{"title":"Vibro piles performance prediction using result of CPT","authors":"Paweł Więcławski","doi":"10.2478/sgem-2021-0024","DOIUrl":"https://doi.org/10.2478/sgem-2021-0024","url":null,"abstract":"Abstract Vibro piles belong to the group of full displacement piles with an expanded base, characterised by a very high load capacity, especially in non-cohesive soils. The problem is to adopt a reliable method for the determination of full load–settlement (Q–s) curve. A frequent difficulty is the determination of the load capacity limit based on the static load test because the course of the load–settlement curve is of a linear nature. This publication presents the empirical method. It allows direct prediction of a full axially loaded pile settlement curve based on the values of qc cone resistance obtained in cone penetration test (CPT). The advantage offered by this procedure is the accuracy of the obtained limit values in relation to the actual load-bearing capacity as compared to other methods based on soil parameters obtained in in situ testing. An additional advantage is the Q–s characteristics, which enable designing for intermediate values, allowing for the criterion of minimal or equal settlements. The shape of analytical curves was compared with static pile load test (SPLT) curves. This comparison showed large convergences between the analytical and measured curves.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"43 1","pages":"452 - 464"},"PeriodicalIF":0.6,"publicationDate":"2021-11-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46188036","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract A new approach for stochastic upper bound kinematical analyses is described. The study proposes an iterative algorithm that uses the Vanmarcke spatial averaging and kinematical failure mechanisms. The iterative procedure ensures the consistency between failure geometry and covariance matrix, which influences the quality of the results. The proposed algorithm can be applied to bearing capacity evaluation or slope stability problems. The iterative algorithm is used in the study to analyse the three-dimensional undrained bearing capacity of shallow foundations and the bearing capacity of the foundation for two-layered soil, in both cases, the soil strength spatial variability is included. Moreover, the obtained results are compared with those provided by the algorithm, based on the constant covariance matrix. The study shows that both approaches provide similar results for a variety of foundation shapes and scale of fluctuation values. Therefore, the simplified algorithm can be used for purposes that require high computational efficiency and for practical applications. The achieved efficiency using a constant covariance matrix for one realisation of a three-dimensional bearing capacity problem that includes the soil strength spatial variability results in about 0.5 seconds for a standard notebook. The numerical example presented in the study indicates the importance of the iterative algorithm for further development of the failure mechanism application in probabilistic analyses. Moreover, because the iterative algorithm is based on the upper bound theorem, it could be utilised as a reference for other methods for spatially variable soil.
{"title":"An iterative algorithm for random upper bound kinematical analysis","authors":"M. Chwała","doi":"10.2478/sgem-2021-0027","DOIUrl":"https://doi.org/10.2478/sgem-2021-0027","url":null,"abstract":"Abstract A new approach for stochastic upper bound kinematical analyses is described. The study proposes an iterative algorithm that uses the Vanmarcke spatial averaging and kinematical failure mechanisms. The iterative procedure ensures the consistency between failure geometry and covariance matrix, which influences the quality of the results. The proposed algorithm can be applied to bearing capacity evaluation or slope stability problems. The iterative algorithm is used in the study to analyse the three-dimensional undrained bearing capacity of shallow foundations and the bearing capacity of the foundation for two-layered soil, in both cases, the soil strength spatial variability is included. Moreover, the obtained results are compared with those provided by the algorithm, based on the constant covariance matrix. The study shows that both approaches provide similar results for a variety of foundation shapes and scale of fluctuation values. Therefore, the simplified algorithm can be used for purposes that require high computational efficiency and for practical applications. The achieved efficiency using a constant covariance matrix for one realisation of a three-dimensional bearing capacity problem that includes the soil strength spatial variability results in about 0.5 seconds for a standard notebook. The numerical example presented in the study indicates the importance of the iterative algorithm for further development of the failure mechanism application in probabilistic analyses. Moreover, because the iterative algorithm is based on the upper bound theorem, it could be utilised as a reference for other methods for spatially variable soil.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"44 1","pages":"13 - 25"},"PeriodicalIF":0.6,"publicationDate":"2021-11-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44384354","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract This paper introduces a method based on a static load test which is aimed to verify the mechanism of the piles soil–skin interaction. The authors base their analysis on detailed data from static load test with extensometers on CFA piles. The main goal of the research is to determine the proper method of examining how the skin of the pile and soil interacts and apply it to practical engineering practice. As the first stage of the research is limited to the available set of piles, the authors make assumptions that will be verified on later stages of research as more data become available. The authors attempt to formulate the boundary conditions for the formation of pile skin resistance formation using mathematical physics equations to describe the phenomena. Current research proves that it is possible, with the suitable for practical engineering calculations, to describe soil–pile interaction mechanism based on static load test results. Experimental research indicated that there is possibility, for practical engineering calculations purposes, to assume that skin resistance of the pile due to depth can be presented with linear graph. The description is made upon extensometer results, but is meant to be appropriate with the standard static load test results, which provide load–settlement curve of the pile.
{"title":"Analysis of the pile skin resistance formation","authors":"Paweł Siemaszko, Z. Meyer","doi":"10.2478/sgem-2021-0026","DOIUrl":"https://doi.org/10.2478/sgem-2021-0026","url":null,"abstract":"Abstract This paper introduces a method based on a static load test which is aimed to verify the mechanism of the piles soil–skin interaction. The authors base their analysis on detailed data from static load test with extensometers on CFA piles. The main goal of the research is to determine the proper method of examining how the skin of the pile and soil interacts and apply it to practical engineering practice. As the first stage of the research is limited to the available set of piles, the authors make assumptions that will be verified on later stages of research as more data become available. The authors attempt to formulate the boundary conditions for the formation of pile skin resistance formation using mathematical physics equations to describe the phenomena. Current research proves that it is possible, with the suitable for practical engineering calculations, to describe soil–pile interaction mechanism based on static load test results. Experimental research indicated that there is possibility, for practical engineering calculations purposes, to assume that skin resistance of the pile due to depth can be presented with linear graph. The description is made upon extensometer results, but is meant to be appropriate with the standard static load test results, which provide load–settlement curve of the pile.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"43 1","pages":"380 - 388"},"PeriodicalIF":0.6,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42350924","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Waste tyre-derived products, including whole tyres, tyre bales, shreds, chips and crumb rubber, have been widely used in geotechnical applications. In particular, tyre bales have considerable potential for use in the construction of a lightweight embankment or road foundation over soft ground, slope stabilisation or landslide repairs and the backfilling for retaining structures. Proper design of tyre bale structures requires a reliable strength analysis to ensure an adequate factor of safety. The analysis should utilise the properties of the tyre bales and the baled structures, which must be properly determined. A laboratory test programme was developed to determine the key strength parameters of a backfill made of tyre bales supplemented with a lightweight aggregate. Full-scale direct shear tests were conducted to define the interface shear strength between the tyre bales and the filling material. Earth pressure reduction analysis based on the experimental results was performed as well to assess the effectiveness of waste tyre bales used as a backfill for rigid retaining structures.
{"title":"Experimental study on earth pressure reduction of waste tyre bales used as a backfill for rigid retaining structures","authors":"A. Duda, T. Siwowski","doi":"10.2478/sgem-2021-0023","DOIUrl":"https://doi.org/10.2478/sgem-2021-0023","url":null,"abstract":"Abstract Waste tyre-derived products, including whole tyres, tyre bales, shreds, chips and crumb rubber, have been widely used in geotechnical applications. In particular, tyre bales have considerable potential for use in the construction of a lightweight embankment or road foundation over soft ground, slope stabilisation or landslide repairs and the backfilling for retaining structures. Proper design of tyre bale structures requires a reliable strength analysis to ensure an adequate factor of safety. The analysis should utilise the properties of the tyre bales and the baled structures, which must be properly determined. A laboratory test programme was developed to determine the key strength parameters of a backfill made of tyre bales supplemented with a lightweight aggregate. Full-scale direct shear tests were conducted to define the interface shear strength between the tyre bales and the filling material. Earth pressure reduction analysis based on the experimental results was performed as well to assess the effectiveness of waste tyre bales used as a backfill for rigid retaining structures.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"43 1","pages":"411 - 424"},"PeriodicalIF":0.6,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46692464","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Stability checking is an essential element of the dimensioning of steel frame structures. One of the stability checking methods allowed by EN 1993-1-1 is the so-called general method of assessing structural stability, based on buckling curves and relative structure slenderness λ¯op {bar lambda _{op}} usually determined through numerical analyses. But this method is not widely used because of the limited computing capabilities of the engineering programs dedicated to static load analyses and difficulties in interpreting the results of the computations. The commonly used computer programs enable one to determine the shape of buckling and critical load amplifier αcr, from which one cannot directly determine the risk of buckling of a real structure. This paper presents a modified and innovative approach to the general method of assessing structural stability, which uses only three parameters, that is, the type of cross section, cross-section strength utilisation and αcr, to determine a member’s/structure’s bearing capacity mobilisation from the stability condition. The problem solution is presented in the form of simple formulas and legible diagrams. Finally, synthetic conclusions are formulated.
{"title":"Innovative Look at the ‘General Method’ of Assessing Buckling Resistance of Steel Structures","authors":"D. Czepiżak","doi":"10.2478/sgem-2021-0022","DOIUrl":"https://doi.org/10.2478/sgem-2021-0022","url":null,"abstract":"Abstract Stability checking is an essential element of the dimensioning of steel frame structures. One of the stability checking methods allowed by EN 1993-1-1 is the so-called general method of assessing structural stability, based on buckling curves and relative structure slenderness λ¯op {bar lambda _{op}} usually determined through numerical analyses. But this method is not widely used because of the limited computing capabilities of the engineering programs dedicated to static load analyses and difficulties in interpreting the results of the computations. The commonly used computer programs enable one to determine the shape of buckling and critical load amplifier αcr, from which one cannot directly determine the risk of buckling of a real structure. This paper presents a modified and innovative approach to the general method of assessing structural stability, which uses only three parameters, that is, the type of cross section, cross-section strength utilisation and αcr, to determine a member’s/structure’s bearing capacity mobilisation from the stability condition. The problem solution is presented in the form of simple formulas and legible diagrams. Finally, synthetic conclusions are formulated.","PeriodicalId":44626,"journal":{"name":"Studia Geotechnica et Mechanica","volume":"43 1","pages":"337 - 345"},"PeriodicalIF":0.6,"publicationDate":"2021-10-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49494568","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：