D. Carosi, A. Morri, L. Ceschini, Alessandro Ferraiuolo
This paper examines the relationship between the magnetization behavior and crystal lattice orientations of Fe–Si alloys intended for magnetic applications. A novel approach is introduced to assess anisotropy of the magnetic losses and first magnetization curves. This method links the magnetocrystalline anisotropy energy of single crystal structures to the textures of polycrystalline materials through a vectorial space description of the crystal unit cell, incorporating vectors for external applied field and saturation magnetization. This study provides a preliminary understanding of how texture influences magnetic loss rates and the first magnetization curves. Experimental results from Electron Back-Scattered Diffraction (EBSD) and Single-Sheet Tests (SSTs), combined with energy considerations and mathematical modeling, reveal the following key findings: (i) a higher density of cubic texture components, whether aligned or rotated relative to the rolling direction, decreases magnetic anisotropy, suggesting that optimizing cubic texture can enhance material performance; (ii) at high magnetic fields, there is no straightforward correlation between energy losses and polarization; and (iii) magnetization rates significantly impact magnetization loss rates, highlighting the importance of considering these rates in optimizing Fe–Si sheet manufacturing processes. These findings offer valuable insights for improving the manufacturing and performance of Fe–Si sheets, emphasizing the need for further exploration of texture effects on magnetic behavior.
{"title":"A Novel Approach for Evaluating the Influence of Texture Intensities on the First Magnetization Curve and Hysteresis Loss in Fe–Si Alloys","authors":"D. Carosi, A. Morri, L. Ceschini, Alessandro Ferraiuolo","doi":"10.3390/ma17163969","DOIUrl":"https://doi.org/10.3390/ma17163969","url":null,"abstract":"This paper examines the relationship between the magnetization behavior and crystal lattice orientations of Fe–Si alloys intended for magnetic applications. A novel approach is introduced to assess anisotropy of the magnetic losses and first magnetization curves. This method links the magnetocrystalline anisotropy energy of single crystal structures to the textures of polycrystalline materials through a vectorial space description of the crystal unit cell, incorporating vectors for external applied field and saturation magnetization. This study provides a preliminary understanding of how texture influences magnetic loss rates and the first magnetization curves. Experimental results from Electron Back-Scattered Diffraction (EBSD) and Single-Sheet Tests (SSTs), combined with energy considerations and mathematical modeling, reveal the following key findings: (i) a higher density of cubic texture components, whether aligned or rotated relative to the rolling direction, decreases magnetic anisotropy, suggesting that optimizing cubic texture can enhance material performance; (ii) at high magnetic fields, there is no straightforward correlation between energy losses and polarization; and (iii) magnetization rates significantly impact magnetization loss rates, highlighting the importance of considering these rates in optimizing Fe–Si sheet manufacturing processes. These findings offer valuable insights for improving the manufacturing and performance of Fe–Si sheets, emphasizing the need for further exploration of texture effects on magnetic behavior.","PeriodicalId":503043,"journal":{"name":"Materials","volume":"48 9","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141922986","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Zihao Chen, Zijie Zhu, Bangzhen Li, Kehua Leng, Min Yu, Zhixin Huang, Ying Li
A dual-phase lattice structure composed of mixed units with hard and soft phase characteristics is proposed in this work. The proposed lattice structure has high specific energy absorption and high compressive strength. The load response and energy absorption characteristics under bending loads were studied through three-point bending tests and numerical analysis methods. The research results indicate that although the deformation modes of the given lattice structure are the same, the dual-phase design strategy significantly improves the bending performance of the lattice structure: the bending modulus is increased by 744.7%, and the specific energy absorption is increased by 243.5%.
{"title":"Bending Collapse and Energy Absorption of Dual-Phase Lattice Structures","authors":"Zihao Chen, Zijie Zhu, Bangzhen Li, Kehua Leng, Min Yu, Zhixin Huang, Ying Li","doi":"10.3390/ma17163952","DOIUrl":"https://doi.org/10.3390/ma17163952","url":null,"abstract":"A dual-phase lattice structure composed of mixed units with hard and soft phase characteristics is proposed in this work. The proposed lattice structure has high specific energy absorption and high compressive strength. The load response and energy absorption characteristics under bending loads were studied through three-point bending tests and numerical analysis methods. The research results indicate that although the deformation modes of the given lattice structure are the same, the dual-phase design strategy significantly improves the bending performance of the lattice structure: the bending modulus is increased by 744.7%, and the specific energy absorption is increased by 243.5%.","PeriodicalId":503043,"journal":{"name":"Materials","volume":"3 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141921938","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
We used ac-susceptibility measurements to study the superspin relaxation in Fe3O4/Isopar M nanomagnetic fluids of different concentrations. Temperature-resolved data collected at different frequencies, χ″ vs. T|f, reveal magnetic events both below and above the freezing point of the carrier fluid (TF = 197 K): χ″ shows peaks at temperatures Tp1 and Tp2 around 75 K and 225 K, respectively. Below TF, the Néel mechanism is entirely responsible for the superspin relaxation (as the carrier fluid is frozen), and we found that the temperature dependence of the relaxation time, τN(Tp1), is well described by the Dorman–Bessais–Fiorani (DBF) model: τNT=τrexpEB+EadkB T. Above TF, both the internal (Néel) and the Brownian superspin relaxation mechanisms are active. Yet, we found evidence that the effective relaxation times, τeff, corresponding to the Tp2 peaks observed in the denser samples do not follow the typical Debye behavior described by the Rosensweig formula 1τeff=1τN+1τB. First, τeff is 5 × 10−5 s at 225 K, almost three orders of magnitude more that its Néel counterpart, τN~8 × 10−8 s, estimated by extrapolating the above-mentioned DBF analysis. Thus, 1τN≫1τeff, which is clearly not consistent with the Rosensweig formula. Second, the observed temperature dependence of the effective relaxation time, τeff(Tp2), is excellently described by τB−1T=Tγ0exp−E′kBT−T0′, a model solely based on the hydrodynamic Brown relaxation, τB(T)=3ηTVHkBT, combined with an activation law for the temperature variation of the viscosity, ηT=η0expE′/kB(T−T0′. The best fit yields γ0=3ηVHkB = 1.6 × 10−5 s·K, E′/kB = 312 K, and T0′ = 178 K. Finally, the higher temperature Tp2 peaks vanish in the more diluted samples (δ ≤ 0.02). This indicates that the formation of larger hydrodynamic particles via aggregation, which is responsible for the observed Brownian relaxation in dense samples, is inhibited by dilution. Our findings, corroborating previous results from Monte Carlo calculations, are important because they might lead to new strategies to synthesize functional magnetic ferrofluids for biomedical applications.
{"title":"Non-Debye Behavior of the Néel and Brown Relaxation in Interacting Magnetic Nanoparticle Ensembles","authors":"Cristian E. Botez, Jeffrey Knoop","doi":"10.3390/ma17163957","DOIUrl":"https://doi.org/10.3390/ma17163957","url":null,"abstract":"We used ac-susceptibility measurements to study the superspin relaxation in Fe3O4/Isopar M nanomagnetic fluids of different concentrations. Temperature-resolved data collected at different frequencies, χ″ vs. T|f, reveal magnetic events both below and above the freezing point of the carrier fluid (TF = 197 K): χ″ shows peaks at temperatures Tp1 and Tp2 around 75 K and 225 K, respectively. Below TF, the Néel mechanism is entirely responsible for the superspin relaxation (as the carrier fluid is frozen), and we found that the temperature dependence of the relaxation time, τN(Tp1), is well described by the Dorman–Bessais–Fiorani (DBF) model: τNT=τrexpEB+EadkB T. Above TF, both the internal (Néel) and the Brownian superspin relaxation mechanisms are active. Yet, we found evidence that the effective relaxation times, τeff, corresponding to the Tp2 peaks observed in the denser samples do not follow the typical Debye behavior described by the Rosensweig formula 1τeff=1τN+1τB. First, τeff is 5 × 10−5 s at 225 K, almost three orders of magnitude more that its Néel counterpart, τN~8 × 10−8 s, estimated by extrapolating the above-mentioned DBF analysis. Thus, 1τN≫1τeff, which is clearly not consistent with the Rosensweig formula. Second, the observed temperature dependence of the effective relaxation time, τeff(Tp2), is excellently described by τB−1T=Tγ0exp−E′kBT−T0′, a model solely based on the hydrodynamic Brown relaxation, τB(T)=3ηTVHkBT, combined with an activation law for the temperature variation of the viscosity, ηT=η0expE′/kB(T−T0′. The best fit yields γ0=3ηVHkB = 1.6 × 10−5 s·K, E′/kB = 312 K, and T0′ = 178 K. Finally, the higher temperature Tp2 peaks vanish in the more diluted samples (δ ≤ 0.02). This indicates that the formation of larger hydrodynamic particles via aggregation, which is responsible for the observed Brownian relaxation in dense samples, is inhibited by dilution. Our findings, corroborating previous results from Monte Carlo calculations, are important because they might lead to new strategies to synthesize functional magnetic ferrofluids for biomedical applications.","PeriodicalId":503043,"journal":{"name":"Materials","volume":"15 16","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141925092","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Early-age masonry structures require temporary support until they achieve full strength. Nevertheless, there is a limited understanding of the properties of freshly laid masonry and the design of newly constructed, unsupported masonry walls. This situation has led to numerous instances of structural damage and injuries to workers, prompting conservative construction bracing techniques. This paper presents comprehensive experimental studies on early-age mortar cubes and masonry prisms to assess the effects of curing time on the compressive properties of masonry assemblies, which is necessary for the design of temporary bracing. The change in modulus of elasticity and compressive strength of masonry prisms and mortar with curing time has been experimentally assessed. The results indicate that the compressive strength of freshly cast mortar cubes is relatively insignificant until approximately 24 h after construction, when it was observed to increase logarithmically. Regarding the performance perspective, the compressive strength of early-age masonry prisms is inconsiderable, less than 15% of full strength during the first day after construction. By contrast, regarding the life safety perspective, the compressive properties of a mortar joint within a masonry assembly (which is of more practical interest) appear to have no effect on the failure strength of concrete masonry prisms over the range of ages tested. The failure modes of the early-age mortar cubes and early-age masonry prism samples depend on the curing time, and different failure modes occurred before and after the start of the primary hydration phase, which is 20.8 h after construction. It is anticipated that the proposed research will provide valuable material properties leading to efficient design of control devices (e.g., temporary bracing) and improved guidelines for concrete-block masonry construction.
{"title":"Experimental Evaluation of Compressive Properties of Early-Age Mortar and Concrete Hollow-Block Masonry Prisms within Construction Stages","authors":"Ali Abasi, Bennett Banting, Ayan Sadhu","doi":"10.3390/ma17163970","DOIUrl":"https://doi.org/10.3390/ma17163970","url":null,"abstract":"Early-age masonry structures require temporary support until they achieve full strength. Nevertheless, there is a limited understanding of the properties of freshly laid masonry and the design of newly constructed, unsupported masonry walls. This situation has led to numerous instances of structural damage and injuries to workers, prompting conservative construction bracing techniques. This paper presents comprehensive experimental studies on early-age mortar cubes and masonry prisms to assess the effects of curing time on the compressive properties of masonry assemblies, which is necessary for the design of temporary bracing. The change in modulus of elasticity and compressive strength of masonry prisms and mortar with curing time has been experimentally assessed. The results indicate that the compressive strength of freshly cast mortar cubes is relatively insignificant until approximately 24 h after construction, when it was observed to increase logarithmically. Regarding the performance perspective, the compressive strength of early-age masonry prisms is inconsiderable, less than 15% of full strength during the first day after construction. By contrast, regarding the life safety perspective, the compressive properties of a mortar joint within a masonry assembly (which is of more practical interest) appear to have no effect on the failure strength of concrete masonry prisms over the range of ages tested. The failure modes of the early-age mortar cubes and early-age masonry prism samples depend on the curing time, and different failure modes occurred before and after the start of the primary hydration phase, which is 20.8 h after construction. It is anticipated that the proposed research will provide valuable material properties leading to efficient design of control devices (e.g., temporary bracing) and improved guidelines for concrete-block masonry construction.","PeriodicalId":503043,"journal":{"name":"Materials","volume":"54 11","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141922932","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Material nonlinearity is explored for the assessment of structural integrity. Crack–wave interactions are of particular interest. The major focus is on higher-order harmonics, generated in propagating shear horizontal (SH) waves. These harmonics are generated due to global material nonlinearity and local effects such as fatigue cracks. The theoretical background of the proposed method is explained. The method is examined using numerical simulations and experimental tests. The former involves the Local Interaction Simulation Approach (LISA), implemented for the nonlinear shear horizontal wavefield. The latter is based on a high-frequency shear excitation approach. Experimental tests are conducted using a series of beam specimens with fatigue cracks. Low-profile, surface-bonded piezoceramic shear actuators are used for excitation. The excitation frequency is selected to minimize the number of generated modes in the examined specimens. Nonlinear ultrasonic responses are collected using a non-contact laser vibrometer. The results show that higher-order harmonic generation—based on shear horizontal wave propagation—can be used for crack detection in the presence of global material nonlinearity.
{"title":"Evaluation of Material Integrity Using Higher-Order Harmonic Generation in Propagating Shear Horizontal Ultrasonic Waves","authors":"R. Radecki, Wieslaw J. Staszewski","doi":"10.3390/ma17163960","DOIUrl":"https://doi.org/10.3390/ma17163960","url":null,"abstract":"Material nonlinearity is explored for the assessment of structural integrity. Crack–wave interactions are of particular interest. The major focus is on higher-order harmonics, generated in propagating shear horizontal (SH) waves. These harmonics are generated due to global material nonlinearity and local effects such as fatigue cracks. The theoretical background of the proposed method is explained. The method is examined using numerical simulations and experimental tests. The former involves the Local Interaction Simulation Approach (LISA), implemented for the nonlinear shear horizontal wavefield. The latter is based on a high-frequency shear excitation approach. Experimental tests are conducted using a series of beam specimens with fatigue cracks. Low-profile, surface-bonded piezoceramic shear actuators are used for excitation. The excitation frequency is selected to minimize the number of generated modes in the examined specimens. Nonlinear ultrasonic responses are collected using a non-contact laser vibrometer. The results show that higher-order harmonic generation—based on shear horizontal wave propagation—can be used for crack detection in the presence of global material nonlinearity.","PeriodicalId":503043,"journal":{"name":"Materials","volume":"83 11","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141922158","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Two-dimensional (2D) transition metal dichalcogenide (TMDC) monolayers exhibit unique physical properties, such as self-terminating surfaces, a direct bandgap, and near-unity photoluminescence (PL) quantum yield (QY), which make them attractive for electronic and optoelectronic applications. Surface charge transfer has been widely used as a technique to control the concentration of free charge in 2D semiconductors, but its estimation and the impact on the optoelectronic properties of the material remain a challenge. In this work, we investigate the optical properties of a WS2 monolayer under three different doping approaches: benzyl viologen (BV), potassium (K), and electrostatic doping. Owing to the excitonic nature of 2D TMDC monolayers, the PL of the doped WS2 monolayer exhibits redshift and a decrease in intensity, which is evidenced by the increase in trion population. The electron concentrations of 3.79×1013 cm−2, 6.21×1013 cm−2, and 3.12×1012 cm−2 were measured for WS2 monolayers doped with BV, K, and electrostatic doping, respectively. PL offers a direct and versatile approach to probe the doping effect, allowing for the measurement of carrier concentration in 2D monolayer semiconductors.
{"title":"Photoluminescence of Chemically and Electrically Doped Two-Dimensional Monolayer Semiconductors","authors":"Hyungjin Kim, Valerio Adinolfi, Sin-Hyung Lee","doi":"10.3390/ma17163962","DOIUrl":"https://doi.org/10.3390/ma17163962","url":null,"abstract":"Two-dimensional (2D) transition metal dichalcogenide (TMDC) monolayers exhibit unique physical properties, such as self-terminating surfaces, a direct bandgap, and near-unity photoluminescence (PL) quantum yield (QY), which make them attractive for electronic and optoelectronic applications. Surface charge transfer has been widely used as a technique to control the concentration of free charge in 2D semiconductors, but its estimation and the impact on the optoelectronic properties of the material remain a challenge. In this work, we investigate the optical properties of a WS2 monolayer under three different doping approaches: benzyl viologen (BV), potassium (K), and electrostatic doping. Owing to the excitonic nature of 2D TMDC monolayers, the PL of the doped WS2 monolayer exhibits redshift and a decrease in intensity, which is evidenced by the increase in trion population. The electron concentrations of 3.79×1013 cm−2, 6.21×1013 cm−2, and 3.12×1012 cm−2 were measured for WS2 monolayers doped with BV, K, and electrostatic doping, respectively. PL offers a direct and versatile approach to probe the doping effect, allowing for the measurement of carrier concentration in 2D monolayer semiconductors.","PeriodicalId":503043,"journal":{"name":"Materials","volume":"2 7","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141921488","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Shuli Sun, Junfeng Qu, Mengyong Sun, Xinming Ren, Cheng Gong, Xin Mu, W. Zan, Zhangyan Zhou, Chengji Deng, B. Ma
Refractory materials are an important pillar for the stable development of the high-temperature industry. A large amount of waste refractories needs to be further disposed of every year, so it is of great significance to carry out research on the recycling of used refractories. In this work, lightweight composite aggregate was prepared by using discarded Al2O3-ZrO2-C refractories as the main raw material, and the performance of the prepared lightweight aggregate was improved by adjusting the calcination temperature and introducing light calcined magnesia additives. The results showed that the cold compressive strength and thermal shock resistance of the lightweight aggregates were significantly improved with increasing calcination temperature. Moreover, the introduction of light calcined magnesia can effectively improve the apparent porosity, cold compressive strength, and thermal shock resistance of the prepared lightweight aggregates at the calcination temperature of 1400 °C. Consequently, this work provides a useful reference for the resource utilization of used refractories, while the prepared lightweight aggregates are expected to be applied in the field of high-temperature insulation.
{"title":"Preparation and Properties of Lightweight Aggregates from Discarded Al2O3-ZrO2-C Refractories","authors":"Shuli Sun, Junfeng Qu, Mengyong Sun, Xinming Ren, Cheng Gong, Xin Mu, W. Zan, Zhangyan Zhou, Chengji Deng, B. Ma","doi":"10.3390/ma17163968","DOIUrl":"https://doi.org/10.3390/ma17163968","url":null,"abstract":"Refractory materials are an important pillar for the stable development of the high-temperature industry. A large amount of waste refractories needs to be further disposed of every year, so it is of great significance to carry out research on the recycling of used refractories. In this work, lightweight composite aggregate was prepared by using discarded Al2O3-ZrO2-C refractories as the main raw material, and the performance of the prepared lightweight aggregate was improved by adjusting the calcination temperature and introducing light calcined magnesia additives. The results showed that the cold compressive strength and thermal shock resistance of the lightweight aggregates were significantly improved with increasing calcination temperature. Moreover, the introduction of light calcined magnesia can effectively improve the apparent porosity, cold compressive strength, and thermal shock resistance of the prepared lightweight aggregates at the calcination temperature of 1400 °C. Consequently, this work provides a useful reference for the resource utilization of used refractories, while the prepared lightweight aggregates are expected to be applied in the field of high-temperature insulation.","PeriodicalId":503043,"journal":{"name":"Materials","volume":"92 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141921784","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper presents the results of a study on the effect of the dispersed phase on the lubricating and rheological properties of selected lubricant compositions. A vegetable oil base (rapeseed oil) was used to prepare vegetable lubricants, which were then thickened with lithium stearate, calcium stearate, aluminum stearate, amorphous silica, and montmorillonite. Based on the results of the tribological tests of selected lubricating compositions, it was found that calcium stearate and montmorillonite have the most beneficial effect on the anti-wear properties of the tested lubricating greases, while silica thickeners (amorphous silica and montmorillonite) provide the effective anti-wear protection in compared to the lubricants produced on lithium and aluminum stearate. The lowest structural viscosity was found for grease thickened with montmorillonite. Much higher values of this parameter were observed for composition, where aluminum stearate was the dispersed phase, while the highest value of structural viscosity was observed for composition, where aerosol–amorphous silica was the thickener. The composition thickened with amorphous silica had the highest yield point value, while the composition in which montmorillonite was the dispersed phase had the lowest value. Dynamic viscosity decreases with temperature, which is characteristic of lubricants. No significant differences in dynamic viscosity were found for the lubricating compositions tested at temperatures above 50 [°C]. The most favorable rheological properties were observed for composition, which was produced using calcium stearate, as it allows the lowest dynamic viscosity at −20 [°C]. Lubricants produced with lithium stearate or aluminum stearate were characterized by higher viscosity at low temperatures. For grease, in which the lithium stearate was used as a thickener, the value of the elasticity index determines the weak viscoelastic properties of tested grease and a greater tendency to change structure under the influence of applied forces. For vegetable grease thickened with aluminum stearate, more than 15 times lower values of the MSD function were observed, and the calculated elasticity index value proves the stronger viscoelastic properties of the aluminum stearate grease in relation to grease thickened with the lithium stearate. The elasticity index value for grease thickened with amorphous silica was lower than for greases thickened with lithium and aluminum stearate, indicating its stronger viscoelastic properties in relation to these two greases. For grease composition prepared on the vegetable oil base and thickened with montmorillonite. The value of the elasticity index was lower than most of the tested grease compositions, without the composition, in which the calcium stearate was used as a thickener. Such results testify to moderately strong viscoelastic properties, which leads to the conclusion that the produced lubricant was a stable substance on changes in chemical stru
{"title":"Effect of Thickener Type on Change the Tribological and Rheological Characteristics of Vegetable Lubricants","authors":"Rafał Kozdrach","doi":"10.3390/ma17163959","DOIUrl":"https://doi.org/10.3390/ma17163959","url":null,"abstract":"This paper presents the results of a study on the effect of the dispersed phase on the lubricating and rheological properties of selected lubricant compositions. A vegetable oil base (rapeseed oil) was used to prepare vegetable lubricants, which were then thickened with lithium stearate, calcium stearate, aluminum stearate, amorphous silica, and montmorillonite. Based on the results of the tribological tests of selected lubricating compositions, it was found that calcium stearate and montmorillonite have the most beneficial effect on the anti-wear properties of the tested lubricating greases, while silica thickeners (amorphous silica and montmorillonite) provide the effective anti-wear protection in compared to the lubricants produced on lithium and aluminum stearate. The lowest structural viscosity was found for grease thickened with montmorillonite. Much higher values of this parameter were observed for composition, where aluminum stearate was the dispersed phase, while the highest value of structural viscosity was observed for composition, where aerosol–amorphous silica was the thickener. The composition thickened with amorphous silica had the highest yield point value, while the composition in which montmorillonite was the dispersed phase had the lowest value. Dynamic viscosity decreases with temperature, which is characteristic of lubricants. No significant differences in dynamic viscosity were found for the lubricating compositions tested at temperatures above 50 [°C]. The most favorable rheological properties were observed for composition, which was produced using calcium stearate, as it allows the lowest dynamic viscosity at −20 [°C]. Lubricants produced with lithium stearate or aluminum stearate were characterized by higher viscosity at low temperatures. For grease, in which the lithium stearate was used as a thickener, the value of the elasticity index determines the weak viscoelastic properties of tested grease and a greater tendency to change structure under the influence of applied forces. For vegetable grease thickened with aluminum stearate, more than 15 times lower values of the MSD function were observed, and the calculated elasticity index value proves the stronger viscoelastic properties of the aluminum stearate grease in relation to grease thickened with the lithium stearate. The elasticity index value for grease thickened with amorphous silica was lower than for greases thickened with lithium and aluminum stearate, indicating its stronger viscoelastic properties in relation to these two greases. For grease composition prepared on the vegetable oil base and thickened with montmorillonite. The value of the elasticity index was lower than most of the tested grease compositions, without the composition, in which the calcium stearate was used as a thickener. Such results testify to moderately strong viscoelastic properties, which leads to the conclusion that the produced lubricant was a stable substance on changes in chemical stru","PeriodicalId":503043,"journal":{"name":"Materials","volume":"49 9","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141922972","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper presents the results of experimental testing of joints welded using conventional TIG and laser methods. The welded components were sheets of the low-carbon steels 13CrMo4-5 and 16Mo3. Welded joints were made using different levels of linear welding energy. In the case of laser welding, a bifocal beam with longitudinal positioning of the focal lengths in relation to the welding direction was used. Experimental tests on welded joints included a bending test and determination of hardness distribution, mechanical properties, and fracture toughness, as well as microstructural research in the material of the various joint zones. Based on the determined strength characteristics, the true stress–strain relationships were defined, and a numerical model of the laser joints was developed in Abaqus 6.12-3. The modelled joint was subjected to loading to determine the most stressed areas of the joints. The numerical results were compared with those obtained using GOM’s Aramis 3D 5M digital image correlation system. The system used made it possible to record displacements on the surface of the analysed joints in real time. Good agreement was obtained between the strain fields calculated numerically and those recorded using the Aramis 3D 5M video system. The numerical calculations provided information on the strains and stresses occurring inside the analysed joint during loading. It was found that the welded joints were characterised by increased hardness and high strength properties in relation to the base material. The bending test of the laser-welded joints gave a positive result—no cracks were observed on the face or root of the weld. The fracture toughness of the joint zones is slightly lower in relation to that of the base material, but no brittle fracture was observed.
本文介绍了使用传统氩弧焊和激光方法焊接接头的实验测试结果。焊接部件为 13CrMo4-5 和 16Mo3 低碳钢板。焊接接头使用了不同水平的线性焊接能量。在激光焊接中，使用了双焦距光束，焦距相对于焊接方向纵向定位。对焊接接头进行的实验测试包括弯曲测试和硬度分布、机械性能和断裂韧性的测定，以及不同接头区域材料的微观结构研究。根据确定的强度特性，定义了真实的应力-应变关系，并在 Abaqus 6.12-3 中开发了激光接头的数值模型。对模型接头进行加载，以确定接头的最大受力区域。数值结果与使用 GOM 的 Aramis 3D 5M 数字图像相关系统获得的结果进行了比较。使用该系统可以实时记录分析接头表面的位移。数值计算得出的应变场与 Aramis 3D 5M 视频系统记录的应变场非常吻合。数值计算提供了加载过程中分析接头内部发生的应变和应力信息。结果发现，与基材相比，焊接接头的硬度和强度都有所提高。激光焊接接头的弯曲测试结果良好，在焊缝表面或根部均未发现裂纹。与母材相比，接头区的断裂韧性略低，但未观察到脆性断裂。
{"title":"Strength and Fracture Toughness of TIG- and Laser-Welded Joints of Low Carbon Ferritic Steels","authors":"T. Pała, W. Wciślik","doi":"10.3390/ma17163956","DOIUrl":"https://doi.org/10.3390/ma17163956","url":null,"abstract":"This paper presents the results of experimental testing of joints welded using conventional TIG and laser methods. The welded components were sheets of the low-carbon steels 13CrMo4-5 and 16Mo3. Welded joints were made using different levels of linear welding energy. In the case of laser welding, a bifocal beam with longitudinal positioning of the focal lengths in relation to the welding direction was used. Experimental tests on welded joints included a bending test and determination of hardness distribution, mechanical properties, and fracture toughness, as well as microstructural research in the material of the various joint zones. Based on the determined strength characteristics, the true stress–strain relationships were defined, and a numerical model of the laser joints was developed in Abaqus 6.12-3. The modelled joint was subjected to loading to determine the most stressed areas of the joints. The numerical results were compared with those obtained using GOM’s Aramis 3D 5M digital image correlation system. The system used made it possible to record displacements on the surface of the analysed joints in real time. Good agreement was obtained between the strain fields calculated numerically and those recorded using the Aramis 3D 5M video system. The numerical calculations provided information on the strains and stresses occurring inside the analysed joint during loading. It was found that the welded joints were characterised by increased hardness and high strength properties in relation to the base material. The bending test of the laser-welded joints gave a positive result—no cracks were observed on the face or root of the weld. The fracture toughness of the joint zones is slightly lower in relation to that of the base material, but no brittle fracture was observed.","PeriodicalId":503043,"journal":{"name":"Materials","volume":"6 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141925441","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Marl, Xiaofei Ni, Tobias Hornig, Christian Spieker, R.-U. Giesen, Hans-Peter Heim, Michael Fister
The material parameters required to describe material behavior can change with the age of the components due to chemical and physical aging processes. The finite element method (FEM) is a tool for designing components for later use. The aim of this study is to correlate the change in the mechanical properties of silicone elastomers from standard tests over a longer period of time with the parameters of the Mooney–Rivlin model. To date, there are no publications on the development of the Mooney–Rivlin parameters of silicone elastomers over a storage period. For this purpose, the Shore A hardness, rebound elasticity, compression set and tensile properties were investigated over an aging period of approx. 200 days on two liquid silicone rubbers (LSRs) and one room-temperature-vulcanizing (RTV) silicone rubber. Depending on the silicone elastomer used, different trends in the characteristic values can be observed over the storage period. In general, increases in the Shore A hardness, rebound resilience and stress at a 100% strain with a decrease in the compression set can be determined. In addition to standard tensile tests, the material’s multiaxial behavior under tension was probed, and it was found that the similarly stress at a 100% strain increased. Finite element simulations verified the standard tensile test and corresponding Mooney–Rivlin model parameters. These parameters from the uniaxial tensile were validated in the multiaxial behavior, and the model’s accuracy in representing material properties and the influence of aging on the FEM simulation were affirmed.
由于化学和物理老化过程，描述材料行为所需的材料参数会随着部件的使用年限而改变。有限元法（FEM）是一种为日后使用而设计部件的工具。本研究的目的是将硅树脂弹性体在较长时间内通过标准测试得出的机械性能变化与穆尼-里夫林模型的参数相关联。迄今为止，还没有关于硅树脂弹性体在储存期间的穆尼-里夫林参数变化的出版物。为此，我们对两种液体硅橡胶（LSR）和一种室温硫化（RTV）硅橡胶在大约 200 天的老化过程中的邵氏 A 硬度、回弹弹性、压缩永久变形和拉伸性能进行了研究。根据所用硅树脂弹性体的不同，可以观察到在储存期间特性值的不同趋势。一般来说，随着压缩永久变形的减小，邵氏 A 硬度、回弹弹性和 100% 应变应力都会增加。除了标准拉伸试验外，还对材料在拉伸状态下的多轴行为进行了探测，结果发现 100%应变时的类似应力也有所增加。有限元模拟验证了标准拉伸试验和相应的穆尼-里夫林模型参数。这些来自单轴拉伸的参数在多轴行为中得到了验证，模型在表示材料特性和老化对有限元模拟的影响方面的准确性也得到了肯定。
{"title":"Correlations between the Aging Behavior and Finite Element Method Simulation of Three Silicone Elastomers","authors":"S. Marl, Xiaofei Ni, Tobias Hornig, Christian Spieker, R.-U. Giesen, Hans-Peter Heim, Michael Fister","doi":"10.3390/ma17163961","DOIUrl":"https://doi.org/10.3390/ma17163961","url":null,"abstract":"The material parameters required to describe material behavior can change with the age of the components due to chemical and physical aging processes. The finite element method (FEM) is a tool for designing components for later use. The aim of this study is to correlate the change in the mechanical properties of silicone elastomers from standard tests over a longer period of time with the parameters of the Mooney–Rivlin model. To date, there are no publications on the development of the Mooney–Rivlin parameters of silicone elastomers over a storage period. For this purpose, the Shore A hardness, rebound elasticity, compression set and tensile properties were investigated over an aging period of approx. 200 days on two liquid silicone rubbers (LSRs) and one room-temperature-vulcanizing (RTV) silicone rubber. Depending on the silicone elastomer used, different trends in the characteristic values can be observed over the storage period. In general, increases in the Shore A hardness, rebound resilience and stress at a 100% strain with a decrease in the compression set can be determined. In addition to standard tensile tests, the material’s multiaxial behavior under tension was probed, and it was found that the similarly stress at a 100% strain increased. Finite element simulations verified the standard tensile test and corresponding Mooney–Rivlin model parameters. These parameters from the uniaxial tensile were validated in the multiaxial behavior, and the model’s accuracy in representing material properties and the influence of aging on the FEM simulation were affirmed.","PeriodicalId":503043,"journal":{"name":"Materials","volume":"44 7","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141924203","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：