Bioinorganic Chemistry and Applications最新文献

In the current study, cellulose/MoS₂/GO nanocomposite has been synthesized by a hydrothermal method. Reports published regarding efficiency of Mo and graphene oxide-based nanocomposites for environmental remediation motivated to synthesize cellulose supported MoS₂/GO nanocomposite. Formation of nanocomposite was initially confirmed by UV-visible and FTIR spectroscopic techniques. Particle size and morphology of the nanocomposite were assessed by scanning electron microscopy (SEM), and it was found having particle size ranging from 50 to 80 nm and heterogeneous structure. The XRD analysis also confirmed the structure of the nanocomposite having cellulose, MoS₂, and GO. The synthesized nanocomposite was further tested for biomolecule protective potential employing different radical scavenging assays. Results of radical DPPH^● (50%) and ABTS ^●+ (51%) scavenging studies indicate that nanocomposites can be used as a biomolecule protective agent. In addition, nanocomposite was also evaluated for photocatalytic potential, and the results showed excellent photocatalytic properties for the degradation of 4-nitrophenol up to 75% and methylene blue and methyl orange up to 85% and 70%, respectively. So, this study confirmed that cellulose supported/stabilized MoS₂/GO nanocomposite can be synthesized by an ecofriendly, cost-effective, and easy hydrothermal method having promising biomolecule protective and photocatalytic potential.

Nowadays, scarcity arises in almost all our basic needs, including water, fuel, and food. Recycling used and scrapped things for a valuable commodity is highly appreciable for compensating for the globally fast-growing demand. This paper aims to investigate waste tyre oil for preparing biodiesel for CI engines by enhancing their performance with hybrid nanoparticles for preparing nanofuel and hybrid nanofuel. The nanoparticles (30-40 nm) of MWCNT and TiO₂ were utilized to prepare nanofuels with nanoparticle concentrations of MWCNT (300 ppm) and TiO₂ (300 ppm), respectively. In the case of hybrid nanofuel, the nanoparticle concentration of MWCNT (150 ppm) and TiO₂ (150 ppm) was preferred. The performance of the proposed nanofuel and hybrid nanofuel with pure diesel was evaluated. The proposed fuel performance outperforms the combustion performance, has higher engine efficiency, and has fewer emissions. The best performances were noticed in hybrid nanofuel that has 32% higher brake thermal efficiency than diesel and 24% and 4% lower BSFC and peak pressure than diesel, respectively. The emission performance is also 29%, 50%, and 13% lower in CO, HC, and CO₂ emissions than that in pure diesel.

[This retracts the article DOI: 10.1155/2022/1594081.].

[This retracts the article DOI: 10.1155/2021/8001787.].

Lotus seedpods (LSPs) are an abundant and underutilized agricultural residue discarded from lotus seed production. In this study, ZnCl₂ and FeCl₃ coactivation of LSP for one-pot preparation of magnetic activated carbon (MAC) was explored for the first time. X-ray diffraction (XRD) results showed that Fe₃O₄, Fe⁰, and ZnO crystals were formed in the LSP-derived carbon matrix. Notably, transmission electron microscopy (TEM) images showed that the shapes of these components consisted of not only nanoparticles but also nanowires. Fe and Zn contents in MAC determined by atomic absorption spectroscopy (AAS) were 6.89 and 3.94 wt%, respectively. Moreover, S_BET and V_total of MAC prepared by coactivation with ZnCl₂ and FeCl₃ were 1080 m²/g and 0.51 cm³/g, which were much higher than those prepared by single activation with FeCl₃ (274 m²/g and 0.14 cm³/g) or ZnCl₂ (369 m²/g and 0.21 cm³/g). MAC was subsequently applied as an oxidation catalyst for Fenton-like degradation of acid orange 10 (AO10). As a result, 0.20 g/L MAC could partially remove AO10 (100 ppm) with an adsorption capacity of 78.4 mg/g at pH 3.0. When 350 ppm H₂O₂ was further added, AO10 was decolorized rapidly, nearly complete within 30 min, and 66% of the COD was removed in 120 min. The potent catalytic performance of MAC might come from the synergistic effect of Fe⁰ and Fe₃O₄ nanocrystals in the porous carbon support. MAC also demonstrated effective stability and reusability after five consecutive cycles, when total AO10 removal at 20 min of H₂O₂ addition slightly decreased from 93.9 ± 0.9% to 86.3 ± 0.8% and minimal iron leaching of 1.14 to 1.19 mg/L was detected. Interestingly, the MAC catalyst with a saturation magnetization of 3.6 emu/g was easily separated from the treated mixture for the next cycle. Overall, these findings demonstrate that magnetic activated carbon prepared from ZnCl₂ and FeCl₃ coactivation of lotus seedpod waste can be a low-cost catalyst for rapid degradation of acid orange 10.

Deep eutectic solvent DES-based grape pomace extracts (GPE) were used to synthesize silver nanoparticles (AgNPs) for the first time. This paper presents a synthesis of AgNPs by a novel method with GPE obtained by an eco-friendly "green" solvent, namely, betaine-lactic acid and proline-lactic acid DESs. Compared with the water-based GPE, the DES-based grape pomace extracts contain lower reducing powers but additionally act as capping agent, which is the more important property for the creation of necessary particle nanosize and dispersion with colloidal stability. DESs were synthesized using a heating method, and Fourier transform infrared spectroscopy (FTIR) was carried out to confirm the formation of the DES. The phytochemical profile of GPE exhibits a high amount of hydroxycinnamic acids (23%), followed by anthocyanins (19%). The silver nanoparticles with a round shape were noticed on the scanning electron microscopy micrographs with the particle size in the range of 10-20 nm. The disc diffusion technique (DDT) showed that the AgNPs exhibited significant antibacterial activity against Gram-negative bacteria Escherichia coli (E. coli) UKM В-906 and Gram-positivespore-formingBacillus subtilis (B. subtilis) UCМ В-506T. Mitotic index (MI) and chromosomal aberrations (CAs) were assessed by A. cepa assay. The synthesized silver nanoparticles do not induce cytogenotoxic and genotoxic changes in Allium cepa L. with nanoparticles at concentrations up to 10%.

[This retracts the article DOI: 10.1155/2021/7832216.].

Insects act as vectors to carry a wide range of bacteria and viruses that can cause multiple vector-borne diseases in humans. Diseases such as dengue fever, epidemic encephalitis B, and epidemic typhus, which pose serious risks to humans, can be transmitted by insects. Due to the absence of effective vaccines for most arbovirus, insect control was the main strategy for vector-borne diseases control. However, the rise of drug resistance in the vectors brings a great challenge to the prevention and control of vector-borne diseases. Therefore, finding an eco-friendly method for vector control is essential to combat vector-borne diseases. Nanomaterials with the ability to resist insects and deliver drugs offer new opportunities to increase agent efficacy compared with traditional agents, and the application of nanoagents has expanded the field of vector-borne disease control. Up to now, the reviews of nanomaterials mainly focus on biomedicines, and the control of insect-borne diseases has always been a neglected field. In this study, we analyzed 425 works of the literature about different nanoparticles applied on vectors in PubMed around keywords, such as"nanoparticles against insect," "NPs against insect," and "metal nanoparticles against insect." Through these articles, we focus on the application and development of nanoparticles (NPs) for vector control, discussing the lethal mechanism of NPs to vectors, which can explore the prospect of applying nanotechnology in the prevention and control of vectors.

The presence of Meloidogyne spp., also known as root-knot nematodes, presents a significant danger to global agricultural progress. Since chemical nematicides have high levels of toxicity, it is imperative to develop environmentally friendly methods to manage root-knot nematodes. Nanotechnology is now the most progressive way to attract researchers due to its innovative quality in combating plant diseases. Our study focused on the sol-gel process to synthesize grass-shaped zinc oxide nanoparticles (G-ZnO NPs) and assess its nematicidal behavior against Meloidogyne incognita. Various concentrations (250, 500, 750, and 1000 ppm) of G-ZnO NPs were utilized to expose both the infectious stage (J2s) and egg masses of M. incognita. Laboratory results revealed that G-ZnO NPs showed toxicity to J2s with LC50 values of 1352.96, 969.64, and 621.53 ppm at 12, 24, and 36 hours, respectively, and the result was the inhibition of egg hatching in M. incognita. All three exposure periods were reported linked with the concentration strength of G-ZnO NPs. The pot experiment results exhibited that G-ZnO NPs significantly reduced the root-gall infection of chickpea plants under M. incognita attack. Compared with the untreated control, there was a significant improvement in plant growth attributes and physiological parameters as well, when distinct G-ZnO NP doses (250, 500, 750, and 1000 ppm) were applied. In the pot study, we noticed a reduction in the root-gall index with an increase in the concentration of G-ZnO NPs. The results confirmed that G-ZnO NPs have enormous potential in sustainable agriculture for controlling the root-knot nematode, M. incognita, in chickpea production.